From: Thomas Schwinge <thomas@codesourcery.com>
To: Iain Sandoe <iain@sandoe.co.uk>,
Arthur Cohen <arthur.cohen@embecosm.com>,
Pierre-Emmanuel Patry <pierre-emmanuel.patry@embecosm.com>
Cc: <gcc-rust@gcc.gnu.org>, GCC Patches <gcc-patches@gcc.gnu.org>
Subject: Re: [PATCH v2 2/4] libgrust: Add libproc_macro and build system
Date: Fri, 27 Oct 2023 16:20:34 +0200 [thread overview]
Message-ID: <875y2s170t.fsf@euler.schwinge.homeip.net> (raw)
In-Reply-To: <0B027199-B2BD-4CC0-9654-695A0316783A@sandoe.co.uk>
Hi!
Short Friday afternoon status update:
On 2023-10-27T08:51:12+0100, Iain Sandoe <iain@sandoe.co.uk> wrote:
>> On 26 Oct 2023, at 09:21, Thomas Schwinge <thomas@codesourcery.com> wrote:
>> First, I've pushed into GCC upstream Git branch devel/rust/libgrust-v2
>> the "v2" libgrust changes as posted by Arthur, so that people can easily
>> test this before it getting into Git master branch.
>>
>> I'll myself later try this for GCN and nvptx targets -- in their current
>> form where they don't support C++ (standard library)
Indeed, this currently fails to build:
[...]
make[3]: Entering directory `[...]/build-gcc/amdgcn-amdhsa/libgrust/libproc_macro'
[...]
libtool: compile: [...]/build-gcc/./gcc/xg++ -B[...]/build-gcc/./gcc/ -nostdinc++ -funconfigured-libstdc++-v3 [...] -c [...]/source-gcc/libgrust/libproc_macro/proc_macro.cc
xg++: error: unrecognized command-line option ‘-funconfigured-libstdc++-v3’
make[3]: *** [proc_macro.lo] Error 1
make[3]: Leaving directory `[...]/build-gcc/amdgcn-amdhsa/libgrust/libproc_macro'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `[...]/build-gcc/amdgcn-amdhsa/libgrust'
make[1]: *** [all-target-libgrust] Error 2
make[1]: Leaving directory `[...]/build-gcc'
make: *** [all] Error 2
("error: unrecognized command-line option ‘-funconfigured-libstdc++-v3’"
indeed is the expected outcome if libstdc++ is not available, as I
understand.)
Same for nvptx-none target.
We need two things: (a) make sure that target libgrust build depends on
target libstdc++, and (b) disable target libgrust if target libstdc++ is
not available (and, later, gracefully handle that situation in the Rust
front end).
As far as I remember, patches exist for (a), and Arthur is going to
integrate/re-submit those. Arthur, before re-submission, feel free to
first cherr-pick and push'these into the GCC upstream Git branch
devel/rust/libgrust-v2, so that I can re-test. I'm not sure about (b),
whether that fell out of the (a) changes, too? I can otherwise look into
that later.
>> and in my hacky WIP
>> trees where C++ (standard library) is supported to some extent.
This does built -- but the default multilib only, as Iain already
reported:
>> (This
>> should, roughly, match C++ functionality (not) provided by a number of
>> other GCC "embedded" targets.)
>
> on Darwin, it works for later systems without multilibs, but fails to build multilibs.
I see that, too.
> —— so….
>
> With the patch below bootstrap suceeded on x86_64-darwin17 and produced a correct
> architecture multilib.
Confirmed, thanks!
> Of course, there is no way to test this at the moment - I’d suggest
> that the next step might be something small in functionality that can allow at least one
> test to be wired up.
ACK.
> ^^^ this is “lightly tested” of course, as I cycle through other versions of the OS will see
> how it pans out.
>
> Do you want me to make a PR with this change against upstream?
Yes, please. (But no hurry.)
Grüße
Thomas
> From 027bc2c5255a6f1b75592e896dd99fac55bfb9b8 Mon Sep 17 00:00:00 2001
> From: Iain Sandoe <iain@sandoe.co.uk>
> Date: Thu, 26 Oct 2023 23:19:36 +0100
> Subject: [PATCH] libgrust: enable multilib
>
> Most of this change is the regenerated files, the multilib config macro
> was already present, but commented out.
>
> libgrust/ChangeLog:
>
> * Makefile.in:
> * aclocal.m4: Regenerate.
> * configure: Regenerate.
> * configure.ac: Uncomment AM_ENABLE_MULTILIB.
> * libproc_macro/Makefile.in:
>
> Signed-off-by: Iain Sandoe <iain@sandoe.co.uk>
> ---
> libgrust/Makefile.in | 2 +
> libgrust/aclocal.m4 | 1 +
> libgrust/configure | 68 ++++++++++++++++++++++++++++--
> libgrust/configure.ac | 2 +-
> libgrust/libproc_macro/Makefile.in | 2 +
> 5 files changed, 71 insertions(+), 4 deletions(-)
>
> diff --git a/libgrust/Makefile.in b/libgrust/Makefile.in
> index bc9b6cc227a..2dc39adff24 100644
> --- a/libgrust/Makefile.in
> +++ b/libgrust/Makefile.in
> @@ -93,6 +93,7 @@ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
> am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
> $(top_srcdir)/../config/depstand.m4 \
> $(top_srcdir)/../config/lead-dot.m4 \
> + $(top_srcdir)/../config/multi.m4 \
> $(top_srcdir)/../config/no-executables.m4 \
> $(top_srcdir)/../config/override.m4 \
> $(top_srcdir)/../config/toolexeclibdir.m4 \
> @@ -275,6 +276,7 @@ localedir = @localedir@
> localstatedir = @localstatedir@
> mandir = @mandir@
> mkdir_p = @mkdir_p@
> +multi_basedir = @multi_basedir@
> oldincludedir = @oldincludedir@
> pdfdir = @pdfdir@
> prefix = @prefix@
> diff --git a/libgrust/aclocal.m4 b/libgrust/aclocal.m4
> index 1bd42c34d74..5d808f05afa 100644
> --- a/libgrust/aclocal.m4
> +++ b/libgrust/aclocal.m4
> @@ -1250,6 +1250,7 @@ AC_SUBST([am__untar])
> m4_include([../config/acx.m4])
> m4_include([../config/depstand.m4])
> m4_include([../config/lead-dot.m4])
> +m4_include([../config/multi.m4])
> m4_include([../config/no-executables.m4])
> m4_include([../config/override.m4])
> m4_include([../config/toolexeclibdir.m4])
> diff --git a/libgrust/configure b/libgrust/configure
> index 2756bddd10b..282027873bd 100755
> --- a/libgrust/configure
> +++ b/libgrust/configure
> @@ -732,6 +732,7 @@ build_os
> build_vendor
> build_cpu
> build
> +multi_basedir
> target_alias
> host_alias
> build_alias
> @@ -773,6 +774,7 @@ SHELL'
> ac_subst_files=''
> ac_user_opts='
> enable_option_checking
> +enable_multilib
> enable_maintainer_mode
> enable_silent_rules
> with_toolexeclibdir
> @@ -1421,6 +1423,7 @@ Optional Features:
> --disable-option-checking ignore unrecognized --enable/--with options
> --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
> --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
> + --enable-multilib build many library versions (default)
> --enable-maintainer-mode
> enable make rules and dependencies not useful (and
> sometimes confusing) to the casual installer
> @@ -2376,7 +2379,43 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
> ac_config_files="$ac_config_files Makefile"
>
>
> -# AM_ENABLE_MULTILIB(, ..)
> +# Default to --enable-multilib
> +# Check whether --enable-multilib was given.
> +if test "${enable_multilib+set}" = set; then :
> + enableval=$enable_multilib; case "$enableval" in
> + yes) multilib=yes ;;
> + no) multilib=no ;;
> + *) as_fn_error $? "bad value $enableval for multilib option" "$LINENO" 5 ;;
> + esac
> +else
> + multilib=yes
> +fi
> +
> +
> +# We may get other options which we leave undocumented:
> +# --with-target-subdir, --with-multisrctop, --with-multisubdir
> +# See config-ml.in if you want the gory details.
> +
> +if test "$srcdir" = "."; then
> + if test "$with_target_subdir" != "."; then
> + multi_basedir="$srcdir/$with_multisrctop../.."
> + else
> + multi_basedir="$srcdir/$with_multisrctop.."
> + fi
> +else
> + multi_basedir="$srcdir/.."
> +fi
> +
> +
> +# Even if the default multilib is not a cross compilation,
> +# it may be that some of the other multilibs are.
> +if test $cross_compiling = no && test $multilib = yes \
> + && test "x${with_multisubdir}" != x ; then
> + cross_compiling=maybe
> +fi
> +
> +ac_config_commands="$ac_config_commands default-1"
> +
>
> # Do not delete or change the following two lines. For why, see
> # http://gcc.gnu.org/ml/libstdc++/2003-07/msg00451.html
> @@ -12512,7 +12551,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 12515 "configure"
> +#line 12554 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -12618,7 +12657,7 @@ else
> lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
> lt_status=$lt_dlunknown
> cat > conftest.$ac_ext <<_LT_EOF
> -#line 12621 "configure"
> +#line 12660 "configure"
> #include "confdefs.h"
>
> #if HAVE_DLFCN_H
> @@ -16804,6 +16843,20 @@ cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
> #
> # INIT-COMMANDS
> #
> +
> +srcdir="$srcdir"
> +host="$host"
> +target="$target"
> +with_multisubdir="$with_multisubdir"
> +with_multisrctop="$with_multisrctop"
> +with_target_subdir="$with_target_subdir"
> +ac_configure_args="${multilib_arg} ${ac_configure_args}"
> +multi_basedir="$multi_basedir"
> +CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
> +CC="$CC"
> +CXX="$CXX"
> +GFORTRAN="$GFORTRAN"
> +GDC="$GDC"
> AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
>
>
> @@ -17175,6 +17228,7 @@ for ac_config_target in $ac_config_targets
> do
> case $ac_config_target in
> "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
> + "default-1") CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;;
> "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
> "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;;
> "libproc_macro/Makefile") CONFIG_FILES="$CONFIG_FILES libproc_macro/Makefile" ;;
> @@ -17607,6 +17661,14 @@ $as_echo "$as_me: executing $ac_file commands" >&6;}
>
>
> case $ac_file$ac_mode in
> + "default-1":C)
> +# Only add multilib support code if we just rebuilt the top-level
> +# Makefile.
> +case " $CONFIG_FILES " in
> + *" Makefile "*)
> + ac_file=Makefile . ${multi_basedir}/config-ml.in
> + ;;
> +esac ;;
> "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
> # Older Autoconf quotes --file arguments for eval, but not when files
> # are listed without --file. Let's play safe and only enable the eval
> diff --git a/libgrust/configure.ac b/libgrust/configure.ac
> index 7aed489a643..d75aa632462 100644
> --- a/libgrust/configure.ac
> +++ b/libgrust/configure.ac
> @@ -2,7 +2,7 @@ AC_INIT([libgrust], version-unused,,librust)
> AC_CONFIG_SRCDIR(Makefile.am)
> AC_CONFIG_FILES([Makefile])
>
> -# AM_ENABLE_MULTILIB(, ..)
> +AM_ENABLE_MULTILIB(, ..)
>
> # Do not delete or change the following two lines. For why, see
> # http://gcc.gnu.org/ml/libstdc++/2003-07/msg00451.html
> diff --git a/libgrust/libproc_macro/Makefile.in b/libgrust/libproc_macro/Makefile.in
> index d3a39736679..46eb6484094 100644
> --- a/libgrust/libproc_macro/Makefile.in
> +++ b/libgrust/libproc_macro/Makefile.in
> @@ -95,6 +95,7 @@ ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
> am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
> $(top_srcdir)/../config/depstand.m4 \
> $(top_srcdir)/../config/lead-dot.m4 \
> + $(top_srcdir)/../config/multi.m4 \
> $(top_srcdir)/../config/no-executables.m4 \
> $(top_srcdir)/../config/override.m4 \
> $(top_srcdir)/../config/toolexeclibdir.m4 \
> @@ -316,6 +317,7 @@ localedir = @localedir@
> localstatedir = @localstatedir@
> mandir = @mandir@
> mkdir_p = @mkdir_p@
> +multi_basedir = @multi_basedir@
> oldincludedir = @oldincludedir@
> pdfdir = @pdfdir@
> prefix = @prefix@
> --
> 2.39.2 (Apple Git-143)
>
>
>>
>>
>> Then:
>>
>> On 2023-10-25T13:06:46+0200, Arthur Cohen <arthur.cohen@embecosm.com> wrote:
>>> From: Pierre-Emmanuel Patry <pierre-emmanuel.patry@embecosm.com>
>>>
>>> Add some dummy files in libproc_macro along with its build system.
>>
>> I've not reviewed the build system in detail, just had a very quick look.
>>
>> Three instances of 'librust'; should be 'libgrust':
>>
>> configure.ac:AC_INIT([libgrust], version-unused,,librust)
>>
>> configure.ac:AC_MSG_NOTICE([librust has been configured.])
>>
>> Makefile.am: "TARGET_LIB_PATH_librust=$(TARGET_LIB_PATH_librust)" \
>>
>> Compared to libgomp (which I'm reasonably familiar with), I found missing
>> in 'libgrust' at 'configure'-level:
>>
>> --enable-multilib build many library versions (default)
>>
>> --disable-werror disable building with -Werror
>>
>> --enable-symvers=STYLE enables symbol versioning of the shared library
>> [default=yes]
>>
>> --enable-cet enable Intel CET in target libraries [default=auto]
>>
>> --with-gcc-major-version-only
>> use only GCC major number in filesystem paths
>>
>> I can't tell off-hand whether all these are important, however.
>>
>> Additionally, the new one that's being discussed in
>> <https://github.com/Rust-GCC/gccrs/issues/2714>
>> 'Update libgrust for upstream GCC commit 6a6d3817afa02bbcd2388c8e005da6faf88932f1 "Config,Darwin: Allow for configuring Darwin to use embedded runpath"'.
>>
>>
>> Grüße
>> Thomas
>>
>>
>>> libgrust/Changelog:
>>>
>>> * Makefile.am: New file.
>>> * configure.ac: New file.
>>> * libproc_macro/Makefile.am: New file.
>>> * libproc_macro/proc_macro.cc: New file.
>>> * libproc_macro/proc_macro.h: New file.
>>>
>>> Signed-off-by: Pierre-Emmanuel Patry <pierre-emmanuel.patry@embecosm.com>
>>> ---
>>> libgrust/Makefile.am | 68 ++++++++++++++++
>>> libgrust/configure.ac | 113 +++++++++++++++++++++++++++
>>> libgrust/libproc_macro/Makefile.am | 58 ++++++++++++++
>>> libgrust/libproc_macro/proc_macro.cc | 7 ++
>>> libgrust/libproc_macro/proc_macro.h | 7 ++
>>> 5 files changed, 253 insertions(+)
>>> create mode 100644 libgrust/Makefile.am
>>> create mode 100644 libgrust/configure.ac
>>> create mode 100644 libgrust/libproc_macro/Makefile.am
>>> create mode 100644 libgrust/libproc_macro/proc_macro.cc
>>> create mode 100644 libgrust/libproc_macro/proc_macro.h
>>>
>>> diff --git a/libgrust/Makefile.am b/libgrust/Makefile.am
>>> new file mode 100644
>>> index 00000000000..8e5274922c5
>>> --- /dev/null
>>> +++ b/libgrust/Makefile.am
>>> @@ -0,0 +1,68 @@
>>> +AUTOMAKE_OPTIONS = 1.8 foreign
>>> +
>>> +SUFFIXES = .c .rs .def .o .lo .a
>>> +
>>> +ACLOCAL_AMFLAGS = -I . -I .. -I ../config
>>> +
>>> +AM_CFLAGS = -I $(srcdir)/../libgcc -I $(MULTIBUILDTOP)../../gcc/include
>>> +
>>> +TOP_GCCDIR := $(shell cd $(top_srcdir) && cd .. && pwd)
>>> +
>>> +GCC_DIR = $(TOP_GCCDIR)/gcc
>>> +RUST_SRC = $(GCC_DIR)/rust
>>> +
>>> +toolexeclibdir=@toolexeclibdir@
>>> +toolexecdir=@toolexecdir@
>>> +
>>> +SUBDIRS = libproc_macro
>>> +
>>> +RUST_BUILDDIR := $(shell pwd)
>>> +
>>> +# Work around what appears to be a GNU make bug handling MAKEFLAGS
>>> +# values defined in terms of make variables, as is the case for CC and
>>> +# friends when we are called from the top level Makefile.
>>> +AM_MAKEFLAGS = \
>>> + "GCC_DIR=$(GCC_DIR)" \
>>> + "RUST_SRC=$(RUST_SRC)" \
>>> + "AR_FLAGS=$(AR_FLAGS)" \
>>> + "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
>>> + "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
>>> + "RUST_FOR_TARGET=$(RUST_FOR_TARGET)" \
>>> + "CFLAGS=$(CFLAGS)" \
>>> + "CXXFLAGS=$(CXXFLAGS)" \
>>> + "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
>>> + "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
>>> + "INSTALL=$(INSTALL)" \
>>> + "INSTALL_DATA=$(INSTALL_DATA)" \
>>> + "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
>>> + "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
>>> + "LDFLAGS=$(LDFLAGS)" \
>>> + "LIBCFLAGS=$(LIBCFLAGS)" \
>>> + "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
>>> + "MAKE=$(MAKE)" \
>>> + "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
>>> + "PICFLAG=$(PICFLAG)" \
>>> + "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
>>> + "SHELL=$(SHELL)" \
>>> + "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
>>> + "exec_prefix=$(exec_prefix)" \
>>> + "infodir=$(infodir)" \
>>> + "libdir=$(libdir)" \
>>> + "includedir=$(includedir)" \
>>> + "prefix=$(prefix)" \
>>> + "tooldir=$(tooldir)" \
>>> + "gxx_include_dir=$(gxx_include_dir)" \
>>> + "AR=$(AR)" \
>>> + "AS=$(AS)" \
>>> + "LD=$(LD)" \
>>> + "RANLIB=$(RANLIB)" \
>>> + "NM=$(NM)" \
>>> + "NM_FOR_BUILD=$(NM_FOR_BUILD)" \
>>> + "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
>>> + "DESTDIR=$(DESTDIR)" \
>>> + "WERROR=$(WERROR)" \
>>> + "TARGET_LIB_PATH=$(TARGET_LIB_PATH)" \
>>> + "TARGET_LIB_PATH_librust=$(TARGET_LIB_PATH_librust)" \
>>> + "LIBTOOL=$(RUST_BUILDDIR)/libtool"
>>> +
>>> +include $(top_srcdir)/../multilib.am
>>> diff --git a/libgrust/configure.ac b/libgrust/configure.ac
>>> new file mode 100644
>>> index 00000000000..7aed489a643
>>> --- /dev/null
>>> +++ b/libgrust/configure.ac
>>> @@ -0,0 +1,113 @@
>>> +AC_INIT([libgrust], version-unused,,librust)
>>> +AC_CONFIG_SRCDIR(Makefile.am)
>>> +AC_CONFIG_FILES([Makefile])
>>> +
>>> +# AM_ENABLE_MULTILIB(, ..)
>>> +
>>> +# Do not delete or change the following two lines. For why, see
>>> +# http://gcc.gnu.org/ml/libstdc++/2003-07/msg00451.html
>>> +AC_CANONICAL_SYSTEM
>>> +target_alias=${target_alias-$host_alias}
>>> +AC_SUBST(target_alias)
>>> +
>>> +# Automake should never attempt to rebuild configure
>>> +AM_MAINTAINER_MODE
>>> +
>>> +AM_INIT_AUTOMAKE([1.15.1 foreign no-dist -Wall])
>>> +
>>> +# Make sure we don't test executables when making cross-tools.
>>> +GCC_NO_EXECUTABLES
>>> +
>>> +
>>> +# Add the ability to change LIBTOOL directory
>>> +GCC_WITH_TOOLEXECLIBDIR
>>> +
>>> +# Use system specific extensions
>>> +AC_USE_SYSTEM_EXTENSIONS
>>> +
>>> +
>>> +# Checks for header files.
>>> +AC_HEADER_STDC
>>> +AC_HEADER_SYS_WAIT
>>> +AC_CHECK_HEADERS(limits.h stddef.h string.h strings.h stdlib.h \
>>> + time.h sys/stat.h wchar.h)
>>> +
>>> +# Check for tools
>>> +AM_PROG_AR
>>> +AC_PROG_CC
>>> +AC_PROG_CXX
>>> +AM_PROG_AS
>>> +AC_PROG_MAKE_SET
>>> +AC_PROG_INSTALL
>>> +
>>> +# Enable libtool
>>> +LT_INIT
>>> +
>>> +# target_noncanonical variables...
>>> +AC_CANONICAL_HOST
>>> +ACX_NONCANONICAL_HOST
>>> +ACX_NONCANONICAL_TARGET
>>> +GCC_TOPLEV_SUBDIRS
>>> +
>>> +AC_MSG_CHECKING([for --enable-version-specific-runtime-libs])
>>> +AC_ARG_ENABLE(version-specific-runtime-libs,
>>> +[ --enable-version-specific-runtime-libs Specify that runtime libraries should be installed in a compiler-specific directory ],
>>> +[case "$enableval" in
>>> + yes) version_specific_libs=yes ;;
>>> + no) version_specific_libs=no ;;
>>> + *) AC_MSG_ERROR([Unknown argument to enable/disable version-specific libs]);;
>>> + esac],
>>> +[version_specific_libs=no])
>>> +AC_MSG_RESULT($version_specific_libs)
>>> +
>>> +toolexecdir=no
>>> +toolexeclibdir=no
>>> +
>>> +# Calculate toolexeclibdir
>>> +# Also toolexecdir, though it's only used in toolexeclibdir
>>> +case ${version_specific_libs} in
>>> + yes)
>>> + # Need the gcc compiler version to know where to install libraries
>>> + # and header files if --enable-version-specific-runtime-libs option
>>> + # is selected.
>>> + toolexecdir='$(libdir)/gcc/$(target_noncanonical)'
>>> + toolexeclibdir='$(toolexecdir)/$(gcc_version)$(MULTISUBDIR)'
>>> + ;;
>>> + no)
>>> + if test -n "$with_cross_host" &&
>>> + test x"$with_cross_host" != x"no"; then
>>> + # Install a library built with a cross compiler in tooldir, not libdir.
>>> + toolexecdir='$(exec_prefix)/$(target_noncanonical)'
>>> + toolexeclibdir='$(toolexecdir)/lib'
>>> + else
>>> + toolexecdir='$(libdir)/gcc-lib/$(target_noncanonical)'
>>> + toolexeclibdir='$(libdir)'
>>> + fi
>>> + multi_os_directory=`$CC -print-multi-os-directory`
>>> + case $multi_os_directory in
>>> + .) ;; # Avoid trailing /.
>>> + *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
>>> + esac
>>> + ;;
>>> +esac
>>> +
>>> +AC_SUBST(toolexecdir)
>>> +AC_SUBST(toolexeclibdir)
>>> +
>>> +
>>> +AC_CONFIG_FILES(AC_FOREACH([DIR], [libproc_macro], [DIR/Makefile ]),
>>> + [ cat > vpsed$$ << \_EOF
>>> +s!`test -f '$<' || echo '$(srcdir)/'`!!
>>> +_EOF
>>> + sed -f vpsed$$ $ac_file > tmp$$
>>> + mv tmp$$ $ac_file
>>> + rm vpsed$$
>>> + echo 'MULTISUBDIR =' >> $ac_file
>>> + ml_norecursion=yes
>>> + AS_UNSET([ml_norecursion])
>>> +])
>>> +
>>> +
>>> +AC_MSG_NOTICE([librust has been configured.])
>>> +
>>> +AC_OUTPUT
>>> diff --git a/libgrust/libproc_macro/Makefile.am b/libgrust/libproc_macro/Makefile.am
>>> new file mode 100644
>>> index 00000000000..1e61d12e506
>>> --- /dev/null
>>> +++ b/libgrust/libproc_macro/Makefile.am
>>> @@ -0,0 +1,58 @@
>>> +SUFFIXES = .cc .o .a .lo .la
>>> +
>>> +ACLOCAL_AMFLAGS = -I .. -I ../../config
>>> +
>>> +toolexeclibdir=@toolexeclibdir@
>>> +toolexecdir=@toolexecdir@
>>> +
>>> +# Work around what appears to be a GNU make bug handling MAKEFLAGS
>>> +# values defined in terms of make variables, as is the case for CC and
>>> +# friends when we are called from the top level Makefile.
>>> +AM_MAKEFLAGS = \
>>> + "AR_FLAGS=$(AR_FLAGS)" \
>>> + "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
>>> + "CC_FOR_TARGET=$(CC_FOR_TARGET)" \
>>> + "CFLAGS=$(CFLAGS)" \
>>> + "CXXFLAGS=$(CXXFLAGS)" \
>>> + "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
>>> + "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
>>> + "INSTALL=$(INSTALL)" \
>>> + "INSTALL_DATA=$(INSTALL_DATA)" \
>>> + "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
>>> + "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
>>> + "LDFLAGS=$(LDFLAGS)" \
>>> + "LIBCFLAGS=$(LIBCFLAGS)" \
>>> + "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
>>> + "MAKE=$(MAKE)" \
>>> + "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
>>> + "PICFLAG=$(PICFLAG)" \
>>> + "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
>>> + "SHELL=$(SHELL)" \
>>> + "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
>>> + "exec_prefix=$(exec_prefix)" \
>>> + "infodir=$(infodir)" \
>>> + "libdir=$(libdir)" \
>>> + "includedir=$(includedir)" \
>>> + "prefix=$(prefix)" \
>>> + "tooldir=$(tooldir)" \
>>> + "gxx_include_dir=$(gxx_include_dir)" \
>>> + "AR=$(AR)" \
>>> + "AS=$(AS)" \
>>> + "LD=$(LD)" \
>>> + "RANLIB=$(RANLIB)" \
>>> + "NM=$(NM)" \
>>> + "NM_FOR_BUILD=$(NM_FOR_BUILD)" \
>>> + "NM_FOR_TARGET=$(NM_FOR_TARGET)" \
>>> + "DESTDIR=$(DESTDIR)" \
>>> + "WERROR=$(WERROR)" \
>>> + "TARGET_LIB_PATH=$(TARGET_LIB_PATH)" \
>>> + "TARGET_LIB_PATH_libgm2=$(TARGET_LIB_PATH_libgm2)"
>>> +
>>> +toolexeclib_LTLIBRARIES = libproc_macro.la
>>> +
>>> +libproc_macro_la_SOURCES = \
>>> + proc_macro.cc
>>> +
>>> +include_HEADERS = \
>>> + proc_macro.h
>>> +
>>> diff --git a/libgrust/libproc_macro/proc_macro.cc b/libgrust/libproc_macro/proc_macro.cc
>>> new file mode 100644
>>> index 00000000000..d13276294aa
>>> --- /dev/null
>>> +++ b/libgrust/libproc_macro/proc_macro.cc
>>> @@ -0,0 +1,7 @@
>>> +#include "proc_macro.h"
>>> +
>>> +int
>>> +test ()
>>> +{
>>> + return 0;
>>> +}
>>> diff --git a/libgrust/libproc_macro/proc_macro.h b/libgrust/libproc_macro/proc_macro.h
>>> new file mode 100644
>>> index 00000000000..2c96b3de685
>>> --- /dev/null
>>> +++ b/libgrust/libproc_macro/proc_macro.h
>>> @@ -0,0 +1,7 @@
>>> +#ifndef PROC_MACRO_H
>>> +#define PROC_MACRO_H
>>> +
>>> +int
>>> +test ();
>>> +
>>> +#endif /* ! PROC_MACRO_H */
>>> --
>>> 2.42.0
>> -----------------
>> Siemens Electronic Design Automation GmbH; Anschrift: Arnulfstraße 201, 80634 München; Gesellschaft mit beschränkter Haftung; Geschäftsführer: Thomas Heurung, Frank Thürauf; Sitz der Gesellschaft: München; Registergericht München, HRB 106955
-----------------
Siemens Electronic Design Automation GmbH; Anschrift: Arnulfstraße 201, 80634 München; Gesellschaft mit beschränkter Haftung; Geschäftsführer: Thomas Heurung, Frank Thürauf; Sitz der Gesellschaft: München; Registergericht München, HRB 106955
next prev parent reply other threads:[~2023-10-27 14:20 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-25 11:06 [PATCH v2 1/4] libgrust: Add entry for maintainers and stub changelog file Arthur Cohen
2023-10-25 11:06 ` [PATCH v2 2/4] libgrust: Add libproc_macro and build system Arthur Cohen
2023-10-26 8:21 ` Thomas Schwinge
2023-10-27 7:51 ` Iain Sandoe
2023-10-27 14:20 ` Thomas Schwinge [this message]
2023-10-27 20:32 ` Disable target libgrust if we're not building target libstdc++ (was: [PATCH v2 2/4] libgrust: Add libproc_macro and build system) Thomas Schwinge
2023-12-18 16:58 ` libgrust: 'AM_ENABLE_MULTILIB' only for target builds [PR113056] " Thomas Schwinge
2024-01-04 15:43 ` libgrust: 'AM_ENABLE_MULTILIB' only for target builds [PR113056] Pierre-Emmanuel Patry
2023-12-15 9:53 ` [PATCH v2 2/4] libgrust: Add libproc_macro and build system Thomas Schwinge
2024-01-16 15:07 ` Jason Merrill
2023-10-25 11:06 ` [PATCH v2 3/4] build: Add libgrust as compilation modules Arthur Cohen
2023-10-25 11:09 ` [PATCH v2 4/4] build: Regenerate build files Arthur Cohen
2023-10-25 21:40 ` [PATCH v2 3/4] build: Add libgrust as compilation modules Thomas Schwinge
2023-10-26 12:07 ` Arthur Cohen
2023-10-27 10:24 ` Only build host libgrust if the Rust language is enabled (was: [PATCH v2 3/4] build: Add libgrust as compilation modules) Thomas Schwinge
2023-10-25 11:06 ` [PATCH v2 4/4] build: Regenerate build files Arthur Cohen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=875y2s170t.fsf@euler.schwinge.homeip.net \
--to=thomas@codesourcery.com \
--cc=arthur.cohen@embecosm.com \
--cc=gcc-patches@gcc.gnu.org \
--cc=gcc-rust@gcc.gnu.org \
--cc=iain@sandoe.co.uk \
--cc=pierre-emmanuel.patry@embecosm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).