From: Oleg Endo <oleg.endo@t-online.de>
To: binutils@sourceware.org
Subject: [PATCH] [SH] Fix PR 10378
Date: Fri, 01 Aug 2014 07:13:00 -0000 [thread overview]
Message-ID: <1406877169.820.16.camel@yam-132-YW-E178-FTW> (raw)
[-- Attachment #1: Type: text/plain, Size: 325 bytes --]
Hello,
The branch relaxation stuff on SH has been broken for a while. A while
ago PRs and patches have been submitted but never applied, it seems.
Attached is the patch by Takashi Yoshii that fixes PR 10378.
Tested with 'make' for target sh-elf.
make check RUNTESTFLAGS="--target_board=sh-sim" looks OK, too.
Cheers,
Oleg
[-- Attachment #2: 0001-Fix-PR-10378.patch --]
[-- Type: text/x-patch, Size: 3236 bytes --]
From 7f632ae6db8bfa2dd764048d068364d6a97fe89e Mon Sep 17 00:00:00 2001
Message-Id: <7f632ae6db8bfa2dd764048d068364d6a97fe89e.1406876013.git.olegendo@gcc.gnu.org>
From: Oleg Endo <olegendo@gcc.gnu.org>
Date: Fri, 1 Aug 2014 08:52:41 +0200
Subject: [PATCH] Fix PR 10378.
---
gas/ChangeLog | 6 ++++++
gas/config/tc-sh.c | 2 +-
ld/testsuite/ChangeLog | 6 ++++++
ld/testsuite/ld-sh/adjsw8.s | 16 ++++++++++++++++
ld/testsuite/ld-sh/sh.exp | 20 ++++++++++++++++++++
5 files changed, 49 insertions(+), 1 deletion(-)
diff --git a/gas/ChangeLog b/gas/ChangeLog
index 72d54db..b7926f4 100644
--- a/gas/ChangeLog
+++ b/gas/ChangeLog
@@ -1,3 +1,9 @@
+2014-08-01 Takashi Yoshii <yoshii.takashi@renesas.com>
+
+ PR 10378
+ * config/tc-sh.c (tc_gen_reloc): Fix initialization of addend in
+ SWITCH_TABLE case.
+
2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
* config/tc-mips.c: Rename INSN_LOAD_COPROC_DELAY to INSN_LOAD_COPROC
diff --git a/gas/config/tc-sh.c b/gas/config/tc-sh.c
index a0cd212..6e9ae92 100644
--- a/gas/config/tc-sh.c
+++ b/gas/config/tc-sh.c
@@ -4435,7 +4435,7 @@ tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp)
if (SWITCH_TABLE (fixp))
{
*rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_subsy);
- rel->addend = 0;
+ rel->addend = rel->address - S_GET_VALUE(fixp->fx_subsy);
if (r_type == BFD_RELOC_16)
r_type = BFD_RELOC_SH_SWITCH16;
else if (r_type == BFD_RELOC_8)
diff --git a/ld/testsuite/ChangeLog b/ld/testsuite/ChangeLog
index 02f9dc4..773a638 100644
--- a/ld/testsuite/ChangeLog
+++ b/ld/testsuite/ChangeLog
@@ -1,3 +1,9 @@
+2014-08-01 Takashi Yoshii <yoshii.takashi@renesas.com>
+
+ PR 10378
+ * ld-sh/adjsw8.s: New.
+ * ld-sh/sh.exp: Add switch8 adjustment test.
+
2014-07-29 Matthew Fortune <matthew.fortune@imgtec.com>
* ld-mips-elf/abiflags-strip1-ph.d: New.
diff --git a/ld/testsuite/ld-sh/adjsw8.s b/ld/testsuite/ld-sh/adjsw8.s
new file mode 100644
index 0000000..6518e26
--- /dev/null
+++ b/ld/testsuite/ld-sh/adjsw8.s
@@ -0,0 +1,16 @@
+L0: .byte L1-L0
+ .byte L2-L0
+ .byte L3-L0
+ .align 1
+L1: mov.l 1f,r1
+ .uses L1
+ jmp @r1
+ nop
+L2: mov.l 1f,r1
+ .uses L2
+ jmp @r1
+ nop
+L3: nop
+ .align 2
+1: .long 2f
+2:
diff --git a/ld/testsuite/ld-sh/sh.exp b/ld/testsuite/ld-sh/sh.exp
index 31181a9..a270400 100644
--- a/ld/testsuite/ld-sh/sh.exp
+++ b/ld/testsuite/ld-sh/sh.exp
@@ -110,6 +110,26 @@ if ![ld_simple_link $ld tmpdir/sh1.s1 $srec_relax_arg ] {
}
}
+set testadjsw8 "SH switch8 adjustment after relax"
+if ![ld_assemble $as "-relax $srcdir/$subdir/adjsw8.s" tmpdir/adjsw8.o] {
+ unresolved $testadjsw8
+} else {
+ if ![ld_simple_link $ld tmpdir/adjsw8 "-relax tmpdir/adjsw8.o"] {
+ fail $testadjsw8
+ } else {
+ send_log "exec $objdump -s tmpdir/adjsw8\n"
+ verbose "exec $objdump -s tmpdir/adjsw8"
+ catch "exec $objdump -s tmpdir/adjsw8" exec_output
+ if [string match "*04080c00*" $exec_output] {
+ pass $testadjsw8
+ } else {
+ send_log "bad switch table\n"
+ verbose "bad switch table"
+ fail $testadjsw8
+ }
+ }
+}
+
set testlink "SH relaxing"
set testjsr "SH confirm relaxing"
set testrun "SH relaxing execution"
--
1.7.9.5
next reply other threads:[~2014-08-01 7:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-01 7:13 Oleg Endo [this message]
2014-08-01 10:29 ` Kaz Kojima
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1406877169.820.16.camel@yam-132-YW-E178-FTW \
--to=oleg.endo@t-online.de \
--cc=binutils@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).