From: Graham Markall <graham.markall@embecosm.com>
To: binutils@sourceware.org
Cc: andrew.burgess@embecosm.com, noamca@mellanox.com,
guybe@mellanox.com, claudiu.zissulescu@synopsys.com,
cupertino.miranda@synopsys.com, anton.kolesov@synopsys.com,
alexey.brodkin@synopsys.com, vineet.gupta1@synopsys.com,
Graham Markall <graham.markall@embecosm.com>
Subject: [PATCH] [ARC] Add new linker emulations for nps
Date: Fri, 09 Dec 2016 17:59:00 -0000 [thread overview]
Message-ID: <1481306322-18618-1-git-send-email-graham.markall@embecosm.com> (raw)
Following responses to Andrew's RFC in
https://sourceware.org/ml/binutils/2016-11/msg00384.html, this patch
adds a new linker emulation for nps, which I believe addresses the
comments received. The emulation uses makes use of the scripts for the
arclinux emulation in order to avoid diverging from it, and adds the
additional sections by setting the OTHER_SECTIONS variable.
There was a suggestion from Anton Kolesov that the symbols could be
better-named, e.g. to use names such as "_nps400_cmem_start" rather than
"_cmem_start". Although this would be preferable, these names are
already in use by users of Mellanox's binutils fork. However, as there
is now a separate emulation, these symbols won't collide for any other
Synopsys customers who might want to have a symbol named, e.g.
"_cmem_start".
Tested with ARC big- and little-endian targets on an x86_64 host.
Proposed commit message follows:
The arc700 nps variant uses some specific named sections to
facilitate its CMEM based instructions, which operate on memory
regions fixed at specific addresses.
This commit adds the arclinux_nps and arclinux_nps_prof
emulations, which are based on the arclinux and arclinux_prof
emulations. The new emulations use the OTHER_SECTIONS variable in
the emulation parameters script to provide symbols mapping to
various locations in the CMEM space on nps.
The accompanying test ensures that all symbols are provided at the
correct address in the linker script.
ld/ChangeLog:
* Makefile.am: Add earclinux_nps.c and earclinux_nps_prof
targets and add to ALL_EMULATION_SOURCES.
* Makefile.in: Likewise, regenerated.
* configure.tgt: Add arclinux_nps and arclinux_nps_prof as
extra emulations for arc*-*-elf* and arc*-*-linux*.
* emulparams/arc-nps.sh: New file.
* emulparams/arclinux_nps.sh: New file.
* emulparams/arclinux_nps_prof.sh: New file.
* testsuite/ld-arc/arclinux-nps.d,
* testsuite/ld-arc/arclinux-nps.s: New test.
---
ld/ChangeLog | 14 +++++++
ld/Makefile.am | 12 ++++++
ld/Makefile.in | 14 +++++++
ld/configure.tgt | 4 +-
ld/emulparams/arc-nps.sh | 78 ++++++++++++++++++++++++++++++++++++++
ld/emulparams/arclinux_nps.sh | 3 ++
ld/emulparams/arclinux_nps_prof.sh | 3 ++
ld/testsuite/ld-arc/arclinux-nps.d | 50 ++++++++++++++++++++++++
ld/testsuite/ld-arc/arclinux-nps.s | 46 ++++++++++++++++++++++
9 files changed, 222 insertions(+), 2 deletions(-)
create mode 100644 ld/emulparams/arc-nps.sh
create mode 100644 ld/emulparams/arclinux_nps.sh
create mode 100644 ld/emulparams/arclinux_nps_prof.sh
create mode 100644 ld/testsuite/ld-arc/arclinux-nps.d
create mode 100644 ld/testsuite/ld-arc/arclinux-nps.s
diff --git a/ld/Makefile.am b/ld/Makefile.am
index ac908bc..ff70761 100644
--- a/ld/Makefile.am
+++ b/ld/Makefile.am
@@ -171,6 +171,8 @@ ALL_EMULATION_SOURCES = \
earcelf.c \
earcelf_prof.c \
earclinux.c \
+ earclinux_nps.c \
+ earclinux_nps_prof.c \
earclinux_prof.c \
earm_epoc_pe.c \
earm_wince_pe.c \
@@ -737,10 +739,20 @@ earclinux.c: $(srcdir)/emulparams/arclinux.sh \
$(ELF_DEPS) $(srcdir)/emultempl/arclinux.em \
$(srcdir)/scripttempl/arclinux.sc ${GEN_DEPENDS}
+earclinux_nps.c: $(srcdir)/emulparams/arclinux_nps.sh \
+ $(srcdir)/emulparams/arc-nps.sh \
+ $(ELF_DEPS) $(srcdir)/emultempl/arclinux.em \
+ $(srcdir)/scripttempl/arclinux.sc ${GEN_DEPENDS}
+
earclinux_prof.c: $(srcdir)/emulparams/arclinux_prof.sh \
$(ELF_DEPS) $(srcdir)/emultempl/arclinux.em \
$(srcdir)/scripttempl/arclinux.sc ${GEN_DEPENDS}
+earclinux_nps_prof.c: $(srcdir)/emulparams/arclinux_nps_prof.sh \
+ $(srcdir)/emulparams/arc-nps.sh \
+ $(ELF_DEPS) $(srcdir)/emultempl/arclinux.em \
+ $(srcdir)/scripttempl/arclinux.sc ${GEN_DEPENDS}
+
earm_epoc_pe.c: $(srcdir)/emulparams/arm_epoc_pe.sh \
$(srcdir)/emultempl/pe.em $(srcdir)/scripttempl/epocpe.sc ${GEN_DEPENDS}
diff --git a/ld/Makefile.in b/ld/Makefile.in
index 46c0302..4f27edf 100644
--- a/ld/Makefile.in
+++ b/ld/Makefile.in
@@ -540,6 +540,8 @@ ALL_EMULATION_SOURCES = \
earcelf.c \
earcelf_prof.c \
earclinux.c \
+ earclinux_nps.c \
+ earclinux_nps_prof.c \
earclinux_prof.c \
earm_epoc_pe.c \
earm_wince_pe.c \
@@ -1179,6 +1181,8 @@ distclean-compile:
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earcelf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earcelf_prof.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earclinux.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earclinux_nps.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earclinux_nps_prof.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earclinux_prof.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earcv2elf.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/earcv2elfx.Po@am__quote@
@@ -2330,10 +2334,20 @@ earclinux.c: $(srcdir)/emulparams/arclinux.sh \
$(ELF_DEPS) $(srcdir)/emultempl/arclinux.em \
$(srcdir)/scripttempl/arclinux.sc ${GEN_DEPENDS}
+earclinux_nps.c: $(srcdir)/emulparams/arclinux_nps.sh \
+ $(srcdir)/emulparams/arc-nps.sh \
+ $(ELF_DEPS) $(srcdir)/emultempl/arclinux.em \
+ $(srcdir)/scripttempl/arclinux.sc ${GEN_DEPENDS}
+
earclinux_prof.c: $(srcdir)/emulparams/arclinux_prof.sh \
$(ELF_DEPS) $(srcdir)/emultempl/arclinux.em \
$(srcdir)/scripttempl/arclinux.sc ${GEN_DEPENDS}
+earclinux_nps_prof.c: $(srcdir)/emulparams/arclinux_nps_prof.sh \
+ $(srcdir)/emulparams/arc-nps.sh \
+ $(ELF_DEPS) $(srcdir)/emultempl/arclinux.em \
+ $(srcdir)/scripttempl/arclinux.sc ${GEN_DEPENDS}
+
earm_epoc_pe.c: $(srcdir)/emulparams/arm_epoc_pe.sh \
$(srcdir)/emultempl/pe.em $(srcdir)/scripttempl/epocpe.sc ${GEN_DEPENDS}
diff --git a/ld/configure.tgt b/ld/configure.tgt
index b9f4782..01969b3 100644
--- a/ld/configure.tgt
+++ b/ld/configure.tgt
@@ -78,10 +78,10 @@ alpha*-*-openbsd*) targ_emul=elf64alpha ;;
alpha*-*-*vms*) targ_emul=alphavms
;;
arc*-*-elf*) targ_emul=arcelf
- targ_extra_emuls="arcelf_prof arclinux arclinux_prof arcv2elf arcv2elfx"
+ targ_extra_emuls="arcelf_prof arclinux arclinux_nps arclinux_nps_prof arclinux_prof arcv2elf arcv2elfx"
;;
arc*-*-linux*) targ_emul=arclinux
- targ_extra_emuls="arclinux_prof arcelf arcelf_prof arcv2elf arcv2elfx"
+ targ_extra_emuls="arclinux_nps arclinux_nps_prof arclinux_prof arcelf arcelf_prof arcv2elf arcv2elfx"
;;
arm-epoc-pe) targ_emul=arm_epoc_pe ; targ_extra_ofiles="deffilep.o pe-dll.o" ;;
arm*-*-cegcc*) targ_emul=arm_wince_pe ; targ_extra_ofiles="deffilep.o pe-dll.o"
diff --git a/ld/emulparams/arc-nps.sh b/ld/emulparams/arc-nps.sh
new file mode 100644
index 0000000..615e6d5
--- /dev/null
+++ b/ld/emulparams/arc-nps.sh
@@ -0,0 +1,78 @@
+OTHER_SECTIONS="
+ /* Start of symbols and sections required to support CMEM instructions
+ on NPS targets. */
+
+ PROVIDE (_cmem_start = ADDR (.cmem) );
+ PROVIDE (_cmem_alter_start = ADDR (.cmem_alter) );
+ PROVIDE (_cmem_shared_start = ADDR (.cmem_shared) );
+ PROVIDE (_cmem_shared_alter_start = ADDR (.cmem_shared_alter) );
+ PROVIDE (_fmt_slot0_start = ADDR (.fmt_slot0) );
+ PROVIDE (_fmt_slot1_start = ADDR (.fmt_slot1) );
+ PROVIDE (_fmt_slot2_start = ADDR (.fmt_slot2) );
+ PROVIDE (_fmt_slot3_start = ADDR (.fmt_slot3) );
+ PROVIDE (_fmt_slot4_start = ADDR (.fmt_slot4) );
+ PROVIDE (_fmt_slot5_start = ADDR (.fmt_slot5) );
+ PROVIDE (_fmt_slot6_start = ADDR (.fmt_slot6) );
+ PROVIDE (_fmt_slot7_start = ADDR (.fmt_slot7) );
+ PROVIDE (_fmt_slot8_start = ADDR (.fmt_slot8) );
+ PROVIDE (_fmt_slot9_start = ADDR (.fmt_slot9) );
+ PROVIDE (_fmt_slot10_start = ADDR (.fmt_slot10) );
+ PROVIDE (_fmt_slot11_start = ADDR (.fmt_slot11) );
+ PROVIDE (_fmt_slot12_start = ADDR (.fmt_slot12) );
+ PROVIDE (_fmt_slot13_start = ADDR (.fmt_slot13) );
+ PROVIDE (_fmt_slot14_start = ADDR (.fmt_slot14) );
+ PROVIDE (_fmt_slot15_start = ADDR (.fmt_slot15) );
+
+ PROVIDE (_cmem_end = ADDR (.cmem) + SIZEOF (.cmem) );
+ PROVIDE (_cmem_alter_end = ADDR (.cmem_alter) + SIZEOF (.cmem_alter) );
+ PROVIDE (_cmem_shared_end = ADDR (.cmem_shared) + SIZEOF (.cmem_shared) );
+ PROVIDE (_cmem_shared_alter_end = ADDR (.cmem_shared_alter) + SIZEOF (.cmem_shared_alter) );
+ PROVIDE (_fmt_slot0_end = ADDR (.fmt_slot0) + SIZEOF (.fmt_slot0) );
+ PROVIDE (_fmt_slot1_end = ADDR (.fmt_slot1) + SIZEOF (.fmt_slot1) );
+ PROVIDE (_fmt_slot2_end = ADDR (.fmt_slot2) + SIZEOF (.fmt_slot2) );
+ PROVIDE (_fmt_slot3_end = ADDR (.fmt_slot3) + SIZEOF (.fmt_slot3) );
+ PROVIDE (_fmt_slot4_end = ADDR (.fmt_slot4) + SIZEOF (.fmt_slot4) );
+ PROVIDE (_fmt_slot5_end = ADDR (.fmt_slot5) + SIZEOF (.fmt_slot5) );
+ PROVIDE (_fmt_slot6_end = ADDR (.fmt_slot6) + SIZEOF (.fmt_slot6) );
+ PROVIDE (_fmt_slot7_end = ADDR (.fmt_slot7) + SIZEOF (.fmt_slot7) );
+ PROVIDE (_fmt_slot8_end = ADDR (.fmt_slot8) + SIZEOF (.fmt_slot8) );
+ PROVIDE (_fmt_slot9_end = ADDR (.fmt_slot9) + SIZEOF (.fmt_slot9) );
+ PROVIDE (_fmt_slot10_end = ADDR (.fmt_slot10) + SIZEOF (.fmt_slot10) );
+ PROVIDE (_fmt_slot11_end = ADDR (.fmt_slot11) + SIZEOF (.fmt_slot11) );
+ PROVIDE (_fmt_slot12_end = ADDR (.fmt_slot12) + SIZEOF (.fmt_slot12) );
+ PROVIDE (_fmt_slot13_end = ADDR (.fmt_slot13) + SIZEOF (.fmt_slot13) );
+ PROVIDE (_fmt_slot14_end = ADDR (.fmt_slot14) + SIZEOF (.fmt_slot14) );
+ PROVIDE (_fmt_slot15_end = ADDR (.fmt_slot15) + SIZEOF (.fmt_slot15) );
+
+ OVERLAY 0x57f00000 :
+ {
+ .cmem { *(.cmem) }
+ .cmem_alter { *(.cmem_alter) }
+ }
+
+ OVERLAY 0x57f08000 :
+ {
+ .cmem_shared { *(.cmem_shared) }
+ .cmem_shared_alter { *(.cmem_shared_alter) }
+ }
+
+ .fmt_slot0 0x58000000 : { *(.fmt_slot0) }
+ .fmt_slot1 0x58800000 : { *(.fmt_slot1) }
+ .fmt_slot2 0x59000000 : { *(.fmt_slot2) }
+ .fmt_slot3 0x59800000 : { *(.fmt_slot3) }
+ .fmt_slot4 0x5a000000 : { *(.fmt_slot4) }
+ .fmt_slot5 0x5a800000 : { *(.fmt_slot5) }
+ .fmt_slot6 0x5b000000 : { *(.fmt_slot6) }
+ .fmt_slot7 0x5b800000 : { *(.fmt_slot7) }
+ .fmt_slot8 0x5c000000 : { *(.fmt_slot8) }
+ .fmt_slot9 0x5c800000 : { *(.fmt_slot9) }
+ .fmt_slot10 0x5d000000 : { *(.fmt_slot10) }
+ .fmt_slot11 0x5d800000 : { *(.fmt_slot11) }
+ .fmt_slot12 0x5e000000 : { *(.fmt_slot12) }
+ .fmt_slot13 0x5e800000 : { *(.fmt_slot13) }
+ .fmt_slot14 0x5f000000 : { *(.fmt_slot14) }
+ .fmt_slot15 0x5f800000 : { *(.fmt_slot15) }
+
+ /* End of nps specific sections and symbols. */
+
+ ${OTHER_SECTIONS}"
diff --git a/ld/emulparams/arclinux_nps.sh b/ld/emulparams/arclinux_nps.sh
new file mode 100644
index 0000000..b1c6a7d
--- /dev/null
+++ b/ld/emulparams/arclinux_nps.sh
@@ -0,0 +1,3 @@
+. ${srcdir}/emulparams/arclinux.sh
+# Extend the OTHER_SECTIONS for nps.
+. ${srcdir}/emulparams/arc-nps.sh
diff --git a/ld/emulparams/arclinux_nps_prof.sh b/ld/emulparams/arclinux_nps_prof.sh
new file mode 100644
index 0000000..80b9db8
--- /dev/null
+++ b/ld/emulparams/arclinux_nps_prof.sh
@@ -0,0 +1,3 @@
+. ${srcdir}/emulparams/arclinux_prof.sh
+# Extend the OTHER_SECTIONS for nps.
+. ${srcdir}/emulparams/arc-nps.sh
diff --git a/ld/testsuite/ld-arc/arclinux-nps.d b/ld/testsuite/ld-arc/arclinux-nps.d
new file mode 100644
index 0000000..5ccd7fc
--- /dev/null
+++ b/ld/testsuite/ld-arc/arclinux-nps.d
@@ -0,0 +1,50 @@
+#source: arclinux-nps.s
+#as: -mnps400
+#ld: -marclinux_nps
+#objdump: -dr
+
+.*: +file format .*arc.*
+
+Disassembly of section .text:
+
+[0-9a-f]+ <.*>:
+ [0-9a-f]+: 200a 0f80 57f0 0000 mov r0,0x57f00000
+ [0-9a-f]+: 200a 0f80 57f0 0000 mov r0,0x57f00000
+ [0-9a-f]+: 200a 0f80 57f0 8000 mov r0,0x57f08000
+ [0-9a-f]+: 200a 0f80 57f0 8000 mov r0,0x57f08000
+ [0-9a-f]+: 200a 0f80 5800 0000 mov r0,0x58000000
+ [0-9a-f]+: 200a 0f80 5880 0000 mov r0,0x58800000
+ [0-9a-f]+: 200a 0f80 5900 0000 mov r0,0x59000000
+ [0-9a-f]+: 200a 0f80 5980 0000 mov r0,0x59800000
+ [0-9a-f]+: 200a 0f80 5a00 0000 mov r0,0x5a000000
+ [0-9a-f]+: 200a 0f80 5a80 0000 mov r0,0x5a800000
+ [0-9a-f]+: 200a 0f80 5b00 0000 mov r0,0x5b000000
+ [0-9a-f]+: 200a 0f80 5b80 0000 mov r0,0x5b800000
+ [0-9a-f]+: 200a 0f80 5c00 0000 mov r0,0x5c000000
+ [0-9a-f]+: 200a 0f80 5c80 0000 mov r0,0x5c800000
+ [0-9a-f]+: 200a 0f80 5d00 0000 mov r0,0x5d000000
+ [0-9a-f]+: 200a 0f80 5d80 0000 mov r0,0x5d800000
+ [0-9a-f]+: 200a 0f80 5e00 0000 mov r0,0x5e000000
+ [0-9a-f]+: 200a 0f80 5e80 0000 mov r0,0x5e800000
+ [0-9a-f]+: 200a 0f80 5f00 0000 mov r0,0x5f000000
+ [0-9a-f]+: 200a 0f80 5f80 0000 mov r0,0x5f800000
+ [0-9a-f]+: 200a 0f80 57f0 0000 mov r0,0x57f00000
+ [0-9a-f]+: 200a 0f80 57f0 0000 mov r0,0x57f00000
+ [0-9a-f]+: 200a 0f80 57f0 8000 mov r0,0x57f08000
+ [0-9a-f]+: 200a 0f80 57f0 8000 mov r0,0x57f08000
+ [0-9a-f]+: 200a 0f80 5800 0000 mov r0,0x58000000
+ [0-9a-f]+: 200a 0f80 5880 0000 mov r0,0x58800000
+ [0-9a-f]+: 200a 0f80 5900 0000 mov r0,0x59000000
+ [0-9a-f]+: 200a 0f80 5980 0000 mov r0,0x59800000
+ [0-9a-f]+: 200a 0f80 5a00 0000 mov r0,0x5a000000
+ [0-9a-f]+: 200a 0f80 5a80 0000 mov r0,0x5a800000
+ [0-9a-f]+: 200a 0f80 5b00 0000 mov r0,0x5b000000
+ [0-9a-f]+: 200a 0f80 5b80 0000 mov r0,0x5b800000
+ [0-9a-f]+: 200a 0f80 5c00 0000 mov r0,0x5c000000
+ [0-9a-f]+: 200a 0f80 5c80 0000 mov r0,0x5c800000
+ [0-9a-f]+: 200a 0f80 5d00 0000 mov r0,0x5d000000
+ [0-9a-f]+: 200a 0f80 5d80 0000 mov r0,0x5d800000
+ [0-9a-f]+: 200a 0f80 5e00 0000 mov r0,0x5e000000
+ [0-9a-f]+: 200a 0f80 5e80 0000 mov r0,0x5e800000
+ [0-9a-f]+: 200a 0f80 5f00 0000 mov r0,0x5f000000
+ [0-9a-f]+: 200a 0f80 5f80 0000 mov r0,0x5f800000
diff --git a/ld/testsuite/ld-arc/arclinux-nps.s b/ld/testsuite/ld-arc/arclinux-nps.s
new file mode 100644
index 0000000..38bf897
--- /dev/null
+++ b/ld/testsuite/ld-arc/arclinux-nps.s
@@ -0,0 +1,46 @@
+ .text
+ .global __start
+__start:
+ mov r0, _cmem_start
+ mov r0, _cmem_alter_start
+ mov r0, _cmem_shared_start
+ mov r0, _cmem_shared_alter_start
+
+ mov r0, _fmt_slot0_start
+ mov r0, _fmt_slot1_start
+ mov r0, _fmt_slot2_start
+ mov r0, _fmt_slot3_start
+ mov r0, _fmt_slot4_start
+ mov r0, _fmt_slot5_start
+ mov r0, _fmt_slot6_start
+ mov r0, _fmt_slot7_start
+ mov r0, _fmt_slot8_start
+ mov r0, _fmt_slot9_start
+ mov r0, _fmt_slot10_start
+ mov r0, _fmt_slot11_start
+ mov r0, _fmt_slot12_start
+ mov r0, _fmt_slot13_start
+ mov r0, _fmt_slot14_start
+ mov r0, _fmt_slot15_start
+
+ mov r0, _cmem_end
+ mov r0, _cmem_alter_end
+ mov r0, _cmem_shared_end
+ mov r0, _cmem_shared_alter_end
+
+ mov r0, _fmt_slot0_end
+ mov r0, _fmt_slot1_end
+ mov r0, _fmt_slot2_end
+ mov r0, _fmt_slot3_end
+ mov r0, _fmt_slot4_end
+ mov r0, _fmt_slot5_end
+ mov r0, _fmt_slot6_end
+ mov r0, _fmt_slot7_end
+ mov r0, _fmt_slot8_end
+ mov r0, _fmt_slot9_end
+ mov r0, _fmt_slot10_end
+ mov r0, _fmt_slot11_end
+ mov r0, _fmt_slot12_end
+ mov r0, _fmt_slot13_end
+ mov r0, _fmt_slot14_end
+ mov r0, _fmt_slot15_end
--
2.7.4
next reply other threads:[~2016-12-09 17:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-09 17:59 Graham Markall [this message]
2016-12-09 18:08 ` Claudiu Zissulescu
2016-12-09 18:31 ` Graham Markall
2016-12-09 18:28 ` [PATCH v2] [ARC] Add new linker emulation " Graham Markall
2017-01-03 17:25 ` Nick Clifton
2017-01-10 11:10 ` Andrew Burgess
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1481306322-18618-1-git-send-email-graham.markall@embecosm.com \
--to=graham.markall@embecosm.com \
--cc=alexey.brodkin@synopsys.com \
--cc=andrew.burgess@embecosm.com \
--cc=anton.kolesov@synopsys.com \
--cc=binutils@sourceware.org \
--cc=claudiu.zissulescu@synopsys.com \
--cc=cupertino.miranda@synopsys.com \
--cc=guybe@mellanox.com \
--cc=noamca@mellanox.com \
--cc=vineet.gupta1@synopsys.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).