* objdump: display short option names with --help
@ 1999-11-19 4:14 Nick Clifton
1999-11-19 10:49 ` Ian Lance Taylor
0 siblings, 1 reply; 4+ messages in thread
From: Nick Clifton @ 1999-11-19 4:14 UTC (permalink / raw)
To: binutils
Hi Guys,
This is just a small patch to include the short versions of the
command line options support by objdump in the output it generates
with the --help command line switch.
OK to apply ?
Cheers
Nick
1999-11-19 Nick Clifton <nickc@cygnus.com>
* objdump.c (usage): Include short options in output.
Index: binutils/objdump.c
===================================================================
RCS file: /cvs/binutils/binutils/binutils/objdump.c,v
retrieving revision 1.13
diff -p -r1.13 objdump.c
*** objdump.c 1999/10/28 03:30:13 1.13
--- objdump.c 1999/11/19 12:12:27
*************** usage (stream, status)
*** 228,246 ****
fprintf (stream, _("\
Usage: %s [-ahifCdDprRtTxsSlw] [-b bfdname] [-m machine] \n\
[-j section-name] [-M disassembler-options]\n\
! [--archive-headers] [--target=bfdname] [--debugging] [--disassemble]\n\
! [--disassemble-all] [--disassemble-zeroes] [--file-headers]\n\
! [--section-headers] [--headers]\n\
! [--info] [--section=section-name] [--line-numbers] [--source]\n"),
program_name);
fprintf (stream, _("\
! [--architecture=machine] [--reloc] [--full-contents] [--stabs]\n\
! [--syms] [--all-headers] [--dynamic-syms] [--dynamic-reloc]\n\
! [--wide] [--version] [--help] [--private-headers]\n\
[--start-address=addr] [--stop-address=addr]\n\
[--prefix-addresses] [--[no-]show-raw-insn] [--demangle]\n\
[--adjust-vma=offset] [-EB|-EL] [--endian={big|little}] objfile...\n\
! at least one option besides -l (--line-numbers) must be given\n"));
list_supported_targets (program_name, stream);
if (status == 0)
fprintf (stream, _("Report bugs to bug-gnu-utils@gnu.org\n"));
--- 228,246 ----
fprintf (stream, _("\
Usage: %s [-ahifCdDprRtTxsSlw] [-b bfdname] [-m machine] \n\
[-j section-name] [-M disassembler-options]\n\
! [-a|--archive-headers] [-b|--target=bfdname] [--debugging]\n\
! [-d|--disassemble] [-D|--disassemble-all] [--disassemble-zeroes]\n\
! [-f|--file-headers] [-h|--section-headers] [-h|--headers]\n\
! [-i|--info] [-j|--section=section-name] [-l|--line-numbers] [-S|--source]\n"),
program_name);
fprintf (stream, _("\
! [-m|--architecture=machine] [-r|--reloc] [-s|--full-contents] [--stabs]\n\
! [-t|--syms] [-x|--all-headers] [-T|--dynamic-syms] [-R|--dynamic-reloc]\n\
! [-w|--wide] [--version] [-H|--help] [-p|--private-headers]\n\
[--start-address=addr] [--stop-address=addr]\n\
[--prefix-addresses] [--[no-]show-raw-insn] [--demangle]\n\
[--adjust-vma=offset] [-EB|-EL] [--endian={big|little}] objfile...\n\
! at least one option besides -l (--line-numbers) must be given\n"));
list_supported_targets (program_name, stream);
if (status == 0)
fprintf (stream, _("Report bugs to bug-gnu-utils@gnu.org\n"));
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: objdump: display short option names with --help
1999-11-19 4:14 objdump: display short option names with --help Nick Clifton
@ 1999-11-19 10:49 ` Ian Lance Taylor
0 siblings, 0 replies; 4+ messages in thread
From: Ian Lance Taylor @ 1999-11-19 10:49 UTC (permalink / raw)
To: nickc; +Cc: binutils
Date: Fri, 19 Nov 1999 12:14:16 GMT
From: Nick Clifton <nickc@cygnus.com>
This is just a small patch to include the short versions of the
command line options support by objdump in the output it generates
with the --help command line switch.
1999-11-19 Nick Clifton <nickc@cygnus.com>
* objdump.c (usage): Include short options in output.
The short options are listed at the start of the usage string. Moving
each short option into the corresponding long option is fine with me.
But please also move each such option out of the list at the start of
the usage string.
objdump and objcopy have gotten so many options that we may want to go
to an output format more like that of ld --help.
Ian
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: objdump: display short option names with --help
@ 1999-11-21 3:47 Nick Clifton
0 siblings, 0 replies; 4+ messages in thread
From: Nick Clifton @ 1999-11-21 3:47 UTC (permalink / raw)
To: binutils
Hi Guys,
: 1999-11-20 Nick Clifton <nickc@cygnus.com>
:
: * objdump.c (usage): Overhaul output: One line per switch.
: Textual description of each switch. Distinguish between
: optional switches and required switches.
: (long_options): Add 'g', 'G' and 'z' short options.
: (main): Distinguish between optional switches and required
: switches.
:
: * binutils.texi: Add -g -G and -z short options for
: --debugging, --stabs and --disassemble-zeroes.
Patch installed.
Cheers
Nick
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: objdump: display short option names with --help
@ 1999-11-20 7:27 Nick Clifton
0 siblings, 0 replies; 4+ messages in thread
From: Nick Clifton @ 1999-11-20 7:27 UTC (permalink / raw)
To: ian; +Cc: binutils
Hi Ian,
: 1999-11-19 Nick Clifton <nickc@cygnus.com>
:
: * objdump.c (usage): Include short options in output.
:
: The short options are listed at the start of the usage string. Moving
: each short option into the corresponding long option is fine with me.
: But please also move each such option out of the list at the start of
: the usage string.
:
: objdump and objcopy have gotten so many options that we may want to go
: to an output format more like that of ld --help.
Actually I quite agree with you. So here is a reworked patch that
totally overhauls the --help output for objdump. With this patch
applied, the output looks like this:
-------------------------------------------------------------------------
Usage: ./objdump <switches> file(s)
At least one of the following switches must be given:
-a --archive-headers Display archive header information
-f --file-headers Display the contents of the overall file header
-p --private-headers Display object format specific file header contents
-h --[section-]headers Display the contents of the section headers
-x --all-headers Display the contents of all headers
-d --disassemble Display assembler contents of executable sections
-D --disassemble-all Display assembler contents of all sections
-S --source Intermix source code with disassembly
-s --full-contents Display the full contents of all sections requested
-g --debugging Display debug information in object file
-G --stabs Display the STABS contents of an ELF format file
-t --syms Display the contents of the symbol table(s)
-T --dynamic-syms Display the contents of the dynamic symbol table
-r --reloc Display the relocation entries in the file
-R --dynamic-reloc Display the dynamic relocation entries in the file
-V --version Display this program's version number
-i --info List object formats and architectures supported
-H --help Display this information
The following switches are optional:
-b --target <bfdname> Specify the target object format as <bfdname>
-m --architecture <machine> Specify the target architecture as <machine>
-j --section <name> Only display information for section <name>
-M --disassembler-options <o> Pass text <o> on to the disassembler
-EB --endian=big Assume big endian format when disassembling
-EL --endian=little Assume little endian format when disassembling
-l --line-numbers Include line numbers and filenames in output
-C --demangle Decode mangled/processed symbol names
-w --wide Format output for more than 80 columns
-z --disassemble-zeroes Do not skip blocks of zeroes when disassembling
--start-address <addr> Only process data whoes address is >= <addr>
--stop-address <addr> Only process data whoes address is <= <addr>
--prefix-addresses Print complete address alongside disassembly
--[no-]show-raw-insn Display hex alongside symbolic disassembly
--adjust-vma <offset> Add <offset> to all displayed section addresses
./objdump: supported targets: elf32-littlearm elf32-bigarm elf32-little elf32-big srec symbolsrec tekhex binary ihex
Report bugs to bug-gnu-utils@gnu.org
-------------------------------------------------------------------------
What do you think - shall I apply this version instead ?
Cheers
Nick
1999-11-20 Nick Clifton <nickc@cygnus.com>
* objdump.c (usage): Overhaul output: One line per switch.
Textual description of each switch. Distinguish between
optional switches and required switches.
(long_options): Add 'g', 'G' and 'z' short options.
(main): Distinguish between optional switches and required
switches.
* binutils.texi: Add -g -G and -z short options for
--debugging, --stabs and --disassemble-zeroes.
Index: objdump.c
===================================================================
RCS file: /cvs/binutils/binutils/binutils/objdump.c,v
retrieving revision 1.13
diff -p -r1.13 objdump.c
*** objdump.c 1999/10/28 03:30:13 1.13
--- objdump.c 1999/11/20 15:15:10
*************** usage (stream, status)
*** 225,247 ****
FILE *stream;
int status;
{
fprintf (stream, _("\
! Usage: %s [-ahifCdDprRtTxsSlw] [-b bfdname] [-m machine] \n\
! [-j section-name] [-M disassembler-options]\n\
! [--archive-headers] [--target=bfdname] [--debugging] [--disassemble]\n\
! [--disassemble-all] [--disassemble-zeroes] [--file-headers]\n\
! [--section-headers] [--headers]\n\
! [--info] [--section=section-name] [--line-numbers] [--source]\n"),
! program_name);
! fprintf (stream, _("\
! [--architecture=machine] [--reloc] [--full-contents] [--stabs]\n\
! [--syms] [--all-headers] [--dynamic-syms] [--dynamic-reloc]\n\
! [--wide] [--version] [--help] [--private-headers]\n\
! [--start-address=addr] [--stop-address=addr]\n\
! [--prefix-addresses] [--[no-]show-raw-insn] [--demangle]\n\
! [--adjust-vma=offset] [-EB|-EL] [--endian={big|little}] objfile...\n\
! at least one option besides -l (--line-numbers) must be given\n"));
! list_supported_targets (program_name, stream);
if (status == 0)
fprintf (stream, _("Report bugs to bug-gnu-utils@gnu.org\n"));
exit (status);
--- 225,274 ----
FILE *stream;
int status;
{
+ fprintf (stream, _("Usage: %s <switches> file(s)\n"), program_name);
+ fprintf (stream, _(" At least one of the following switches must be given:\n"));
fprintf (stream, _("\
! -a --archive-headers Display archive header information\n\
! -f --file-headers Display the contents of the overall file header\n\
! -p --private-headers Display object format specific file header contents\n\
! -h --[section-]headers Display the contents of the section headers\n\
! -x --all-headers Display the contents of all headers\n\
! -d --disassemble Display assembler contents of executable sections\n\
! -D --disassemble-all Display assembler contents of all sections\n\
! -S --source Intermix source code with disassembly\n\
! -s --full-contents Display the full contents of all sections requested\n\
! -g --debugging Display debug information in object file\n\
! -G --stabs Display the STABS contents of an ELF format file\n\
! -t --syms Display the contents of the symbol table(s)\n\
! -T --dynamic-syms Display the contents of the dynamic symbol table\n\
! -r --reloc Display the relocation entries in the file\n\
! -R --dynamic-reloc Display the dynamic relocation entries in the file\n\
! -V --version Display this program's version number\n\
! -i --info List object formats and architectures supported\n\
! -H --help Display this information\n\
! "));
! if (status != 2)
! {
! fprintf (stream, _("\n The following switches are optional:\n"));
! fprintf (stream, _("\
! -b --target <bfdname> Specify the target object format as <bfdname>\n\
! -m --architecture <machine> Specify the target architecture as <machine>\n\
! -j --section <name> Only display information for section <name>\n\
! -M --disassembler-options <o> Pass text <o> on to the disassembler\n\
! -EB --endian=big Assume big endian format when disassembling\n\
! -EL --endian=little Assume little endian format when disassembling\n\
! -l --line-numbers Include line numbers and filenames in output\n\
! -C --demangle Decode mangled/processed symbol names\n\
! -w --wide Format output for more than 80 columns\n\
! -z --disassemble-zeroes Do not skip blocks of zeroes when disassembling\n\
! --start-address <addr> Only process data whoes address is >= <addr>\n\
! --stop-address <addr> Only process data whoes address is <= <addr>\n\
! --prefix-addresses Print complete address alongside disassembly\n\
! --[no-]show-raw-insn Display hex alongside symbolic disassembly\n\
! --adjust-vma <offset> Add <offset> to all displayed section addresses\n\
! \n"));
! list_supported_targets (program_name, stream);
! }
if (status == 0)
fprintf (stream, _("Report bugs to bug-gnu-utils@gnu.org\n"));
exit (status);
*************** static struct option long_options[]=
*** 261,272 ****
{"private-headers", no_argument, NULL, 'p'},
{"architecture", required_argument, NULL, 'm'},
{"archive-headers", no_argument, NULL, 'a'},
! {"debugging", no_argument, &dump_debugging, 1},
! {"demangle", no_argument, &do_demangle, 1},
{"disassemble", no_argument, NULL, 'd'},
{"disassemble-all", no_argument, NULL, 'D'},
{"disassembler-options", required_argument, NULL, 'M'},
! {"disassemble-zeroes", no_argument, &disassemble_zeroes, 1},
{"dynamic-reloc", no_argument, NULL, 'R'},
{"dynamic-syms", no_argument, NULL, 'T'},
{"endian", required_argument, NULL, OPTION_ENDIAN},
--- 288,299 ----
{"private-headers", no_argument, NULL, 'p'},
{"architecture", required_argument, NULL, 'm'},
{"archive-headers", no_argument, NULL, 'a'},
! {"debugging", no_argument, NULL, 'g'},
! {"demangle", no_argument, NULL, 'C'},
{"disassemble", no_argument, NULL, 'd'},
{"disassemble-all", no_argument, NULL, 'D'},
{"disassembler-options", required_argument, NULL, 'M'},
! {"disassemble-zeroes", no_argument, NULL, 'z'},
{"dynamic-reloc", no_argument, NULL, 'R'},
{"dynamic-syms", no_argument, NULL, 'T'},
{"endian", required_argument, NULL, OPTION_ENDIAN},
*************** static struct option long_options[]=
*** 283,295 ****
{"section-headers", no_argument, NULL, 'h'},
{"show-raw-insn", no_argument, &show_raw_insn, 1},
{"source", no_argument, NULL, 'S'},
! {"stabs", no_argument, &dump_stab_section_info, 1},
{"start-address", required_argument, NULL, OPTION_START_ADDRESS},
{"stop-address", required_argument, NULL, OPTION_STOP_ADDRESS},
{"syms", no_argument, NULL, 't'},
{"target", required_argument, NULL, 'b'},
! {"version", no_argument, &show_version, 1},
! {"wide", no_argument, &wide_output, 'w'},
{0, no_argument, 0, 0}
};
\f
--- 310,322 ----
{"section-headers", no_argument, NULL, 'h'},
{"show-raw-insn", no_argument, &show_raw_insn, 1},
{"source", no_argument, NULL, 'S'},
! {"stabs", no_argument, NULL, 'G'},
{"start-address", required_argument, NULL, OPTION_START_ADDRESS},
{"stop-address", required_argument, NULL, OPTION_STOP_ADDRESS},
{"syms", no_argument, NULL, 't'},
{"target", required_argument, NULL, 'b'},
! {"version", no_argument, NULL, 'V'},
! {"wide", no_argument, NULL, 'w'},
{0, no_argument, 0, 0}
};
\f
*************** main (argc, argv)
*** 2767,2778 ****
bfd_init ();
set_default_bfd_target ();
! while ((c = getopt_long (argc, argv, "pib:m:M:VCdDlfahrRtTxsSj:wE:",
long_options, (int *) 0))
!= EOF)
{
- if (c != 'l' && c != OPTION_START_ADDRESS && c != OPTION_STOP_ADDRESS)
- seenflag = true;
switch (c)
{
case 0:
--- 2794,2803 ----
bfd_init ();
set_default_bfd_target ();
! while ((c = getopt_long (argc, argv, "pib:m:M:VCdDlfahHrRtTxsSj:wE:zgG",
long_options, (int *) 0))
!= EOF)
{
switch (c)
{
case 0:
*************** main (argc, argv)
*** 2787,2889 ****
only = optarg;
break;
case 'l':
! with_line_numbers = 1;
break;
case 'b':
target = optarg;
break;
case 'f':
dump_file_header = true;
break;
case 'i':
formats_info = true;
break;
case 'p':
! dump_private_headers = 1;
break;
case 'x':
! dump_private_headers = 1;
! dump_symtab = 1;
! dump_reloc_info = 1;
dump_file_header = true;
! dump_ar_hdrs = 1;
! dump_section_headers = 1;
break;
case 't':
! dump_symtab = 1;
break;
case 'T':
! dump_dynamic_symtab = 1;
! break;
! case 'C':
! do_demangle = 1;
break;
case 'd':
disassemble = true;
break;
case 'D':
! disassemble = disassemble_all = true;
break;
case 'S':
disassemble = true;
with_source_code = true;
break;
case 's':
! dump_section_contents = 1;
break;
case 'r':
! dump_reloc_info = 1;
break;
case 'R':
! dump_dynamic_reloc_info = 1;
break;
case 'a':
! dump_ar_hdrs = 1;
break;
case 'h':
! dump_section_headers = 1;
break;
case 'H':
usage (stdout, 0);
case 'V':
! show_version = 1;
! break;
! case 'w':
! wide_output = 1;
! break;
! case OPTION_ADJUST_VMA:
! adjust_section_vma = parse_vma (optarg, "--adjust-vma");
! break;
! case OPTION_START_ADDRESS:
! start_address = parse_vma (optarg, "--start-address");
break;
! case OPTION_STOP_ADDRESS:
! stop_address = parse_vma (optarg, "--stop-address");
! break;
! case 'E':
! if (strcmp (optarg, "B") == 0)
! endian = BFD_ENDIAN_BIG;
! else if (strcmp (optarg, "L") == 0)
! endian = BFD_ENDIAN_LITTLE;
! else
! {
! fprintf (stderr, _("%s: unrecognized -E option\n"),
! program_name);
! usage (stderr, 1);
! }
! break;
! case OPTION_ENDIAN:
! if (strncmp (optarg, "big", strlen (optarg)) == 0)
! endian = BFD_ENDIAN_BIG;
! else if (strncmp (optarg, "little", strlen (optarg)) == 0)
! endian = BFD_ENDIAN_LITTLE;
! else
! {
! fprintf (stderr, _("%s: unrecognized --endian type `%s'\n"),
! program_name, optarg);
! usage (stderr, 1);
! }
! break;
default:
usage (stderr, 1);
}
--- 2812,2944 ----
only = optarg;
break;
case 'l':
! with_line_numbers = true;
break;
case 'b':
target = optarg;
break;
+ case 'C':
+ do_demangle = true;
+ break;
+ case 'w':
+ wide_output = true;
+ break;
+ case OPTION_ADJUST_VMA:
+ adjust_section_vma = parse_vma (optarg, "--adjust-vma");
+ break;
+ case OPTION_START_ADDRESS:
+ start_address = parse_vma (optarg, "--start-address");
+ break;
+ case OPTION_STOP_ADDRESS:
+ stop_address = parse_vma (optarg, "--stop-address");
+ break;
+ case 'E':
+ if (strcmp (optarg, "B") == 0)
+ endian = BFD_ENDIAN_BIG;
+ else if (strcmp (optarg, "L") == 0)
+ endian = BFD_ENDIAN_LITTLE;
+ else
+ {
+ fprintf (stderr, _("%s: unrecognized -E option\n"),
+ program_name);
+ usage (stderr, 1);
+ }
+ break;
+ case OPTION_ENDIAN:
+ if (strncmp (optarg, "big", strlen (optarg)) == 0)
+ endian = BFD_ENDIAN_BIG;
+ else if (strncmp (optarg, "little", strlen (optarg)) == 0)
+ endian = BFD_ENDIAN_LITTLE;
+ else
+ {
+ fprintf (stderr, _("%s: unrecognized --endian type `%s'\n"),
+ program_name, optarg);
+ usage (stderr, 1);
+ }
+ break;
+
case 'f':
dump_file_header = true;
+ seenflag = true;
break;
case 'i':
formats_info = true;
+ seenflag = true;
break;
case 'p':
! dump_private_headers = true;
! seenflag = true;
break;
case 'x':
! dump_private_headers = true;
! dump_symtab = true;
! dump_reloc_info = true;
dump_file_header = true;
! dump_ar_hdrs = true;
! dump_section_headers = true;
! seenflag = true;
break;
case 't':
! dump_symtab = true;
! seenflag = true;
break;
case 'T':
! dump_dynamic_symtab = true;
! seenflag = true;
break;
case 'd':
disassemble = true;
+ seenflag = true;
break;
+ case 'z':
+ disassemble_zeroes = true;
+ break;
case 'D':
! disassemble = true;
! disassemble_all = true;
! seenflag = true;
break;
case 'S':
disassemble = true;
with_source_code = true;
+ seenflag = true;
+ break;
+ case 'g':
+ dump_debugging = 1;
+ seenflag = true;
+ break;
+ case 'G':
+ dump_stab_section_info = true;
+ seenflag = true;
break;
case 's':
! dump_section_contents = true;
! seenflag = true;
break;
case 'r':
! dump_reloc_info = true;
! seenflag = true;
break;
case 'R':
! dump_dynamic_reloc_info = true;
! seenflag = true;
break;
case 'a':
! dump_ar_hdrs = true;
! seenflag = true;
break;
case 'h':
! dump_section_headers = true;
! seenflag = true;
break;
case 'H':
usage (stdout, 0);
+ seenflag = true;
case 'V':
! show_version = true;
! seenflag = true;
break;
!
default:
usage (stderr, 1);
}
*************** main (argc, argv)
*** 2893,2904 ****
print_version ("objdump");
if (seenflag == false)
! usage (stderr, 1);
if (formats_info)
! {
! display_info ();
! }
else
{
if (optind == argc)
--- 2948,2957 ----
print_version ("objdump");
if (seenflag == false)
! usage (stderr, 2);
if (formats_info)
! display_info ();
else
{
if (optind == argc)
Index: binutils.texi
===================================================================
RCS file: /cvs/binutils/binutils/binutils/binutils.texi,v
retrieving revision 1.13
diff -p -r1.13 binutils.texi
*** binutils.texi 1999/10/08 13:56:33 1.13
--- binutils.texi 1999/11/20 15:15:11
*************** Show a summary of the options to @code{o
*** 1157,1181 ****
@smallexample
objdump [ -a | --archive-headers ]
! [ -b @var{bfdname} | --target=@var{bfdname} ] [ --debugging ]
! [ -C | --demangle ] [ -d | --disassemble ]
! [ -D | --disassemble-all ] [ --disassemble-zeroes ]
[ -EB | -EL | --endian=@{big | little @} ]
[ -f | --file-headers ]
! [ -h | --section-headers | --headers ] [ -i | --info ]
[ -j @var{section} | --section=@var{section} ]
! [ -l | --line-numbers ] [ -S | --source ]
[ -m @var{machine} | --architecture=@var{machine} ]
[ -M @var{options} | --disassembler-options=@var{options}]
[ -p | --private-headers ]
! [ -r | --reloc ] [ -R | --dynamic-reloc ]
! [ -s | --full-contents ] [ --stabs ]
! [ -t | --syms ] [ -T | --dynamic-syms ] [ -x | --all-headers ]
! [ -w | --wide ] [ --start-address=@var{address} ]
[ --stop-address=@var{address} ]
! [ --prefix-addresses] [ --[no-]show-raw-insn ]
[ --adjust-vma=@var{offset} ]
! [ --version ] [ --help ]
@var{objfile}@dots{}
@end smallexample
--- 1157,1193 ----
@smallexample
objdump [ -a | --archive-headers ]
! [ -b @var{bfdname} | --target=@var{bfdname} ]
! [ -C | --demangle ]
! [ -d | --disassemble ]
! [ -D | --disassemble-all ]
! [ -z | --disassemble-zeroes ]
[ -EB | -EL | --endian=@{big | little @} ]
[ -f | --file-headers ]
! [ -g | --debugging ]
! [ -h | --section-headers | --headers ]
! [ -i | --info ]
[ -j @var{section} | --section=@var{section} ]
! [ -l | --line-numbers ]
! [ -S | --source ]
[ -m @var{machine} | --architecture=@var{machine} ]
[ -M @var{options} | --disassembler-options=@var{options}]
[ -p | --private-headers ]
! [ -r | --reloc ]
! [ -R | --dynamic-reloc ]
! [ -s | --full-contents ]
! [ -G | --stabs ]
! [ -t | --syms ]
! [ -T | --dynamic-syms ]
! [ -x | --all-headers ]
! [ -w | --wide ]
! [ --start-address=@var{address} ]
[ --stop-address=@var{address} ]
! [ --prefix-addresses]
! [ --[no-]show-raw-insn ]
[ --adjust-vma=@var{offset} ]
! [ -V | --version ]
! [ -H | --help ]
@var{objfile}@dots{}
@end smallexample
*************** specify archives, @code{objdump} shows i
*** 1190,1196 ****
object files.
The long and short forms of options, shown here as alternatives, are
! equivalent. At least one option besides @samp{-l} must be given.
@table @code
@item -a
--- 1202,1209 ----
object files.
The long and short forms of options, shown here as alternatives, are
! equivalent. At least one option from the list
! @samp{-a,-d,-D,-f,-g,-G,-h,-H,-p,-r,-R,-S,-t,-T,-V,-x} must be given.
@table @code
@item -a
*************** Besides removing any initial underscore
*** 1236,1241 ****
--- 1249,1255 ----
makes C++ function names readable. @xref{c++filt}, for more information
on demangling.
+ @item -G
@item --debugging
Display debugging information. This attempts to parse debugging
information stored in the file and print it out using a C like syntax.
*************** in symbolic form. This is the default e
*** 1382,1387 ****
--- 1396,1402 ----
When disassembling instructions, do not print the instruction bytes.
This is the default when @code{--prefix-addresses} is used.
+ @item -G
@item --stabs
@cindex stab
@cindex .stab
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~1999-11-21 3:47 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1999-11-19 4:14 objdump: display short option names with --help Nick Clifton
1999-11-19 10:49 ` Ian Lance Taylor
1999-11-20 7:27 Nick Clifton
1999-11-21 3:47 Nick Clifton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).