From: "H. J. Lu" <hjl@lucon.org>
To: binutils@sources.redhat.com
Cc: paul@codesourcery.com, zack@codesourcery.com, Tomer.Levi@nsc.com,
rearnsha@arm.com, dan@debian.org, bob.wilson@acm.org,
jakub@redhat.com
Subject: Re: include/ChangeLog vs include/*/ChangeLog
Date: Wed, 13 Apr 2005 16:59:00 -0000 [thread overview]
Message-ID: <20050413165832.GA31708@lucon.org> (raw)
In-Reply-To: <m3d5szmmau.fsf@gossamer.airs.com>
On Tue, Apr 12, 2005 at 10:40:25PM -0400, Ian Lance Taylor wrote:
> "H. J. Lu" <hjl@lucon.org> writes:
>
> > Shouldn't the entry for */*.h be in include/*/ChangeLog? There are
> > quite a few:
>
> Yes, they should.
>
I checked in the following patch. Could we please be more careful
next time?
Thanks.
H.J.
----
Index: ChangeLog
===================================================================
RCS file: /cvs/src/src/include/ChangeLog,v
retrieving revision 1.312
diff -u -p -r1.312 ChangeLog
--- ChangeLog 12 Apr 2005 19:35:52 -0000 1.312
+++ ChangeLog 13 Apr 2005 16:52:15 -0000
@@ -1,7 +1,3 @@
-2005-04-12 Paul Brook <paul@codesourcery.com>
-
- * opcode/m88k.h: Rename psr macros to avoid conflicts.
-
2005-04-11 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* libiberty.h (fopen_unlocked, fdopen_unlocked, freopen_unlocked):
@@ -61,12 +57,6 @@
* bfdlink.h (bfd_link_info): Add gc_sections.
-2005-03-12 Zack Weinberg <zack@codesourcery.com>
-
- * opcode/arm.h: Adjust comments for ARM_EXT_V4T and ARM_EXT_V5T.
- Add ARM_EXT_V6T2, ARM_ARCH_V6T2, ARM_ARCH_V6KT2, ARM_ARCH_V6ZT2,
- and ARM_ARCH_V6ZKT2.
-
2005-03-09 Mark Mitchell <mark@codesourcery.com>
* libiberty.h (gettimeofday): Declare.
@@ -104,14 +94,6 @@
* fibheap.h (struct fibnode): Only use unsigned long bitfields
when __GNUC__ is defined and ints are less than 32-bits wide.
-2004-11-29 Tomer Levi <Tomer.Levi@nsc.com>
-
- * opcode/crx.h (enum operand_type): Rename rbase_cst4 to rbase_dispu4.
- Remove redundant instruction types.
- (struct argument): X_op - new field.
- (struct cst4_entry): Remove.
- (no_op_insn): Declare.
-
2004-11-04 Paul Brook <paul@codesourcery.com>
* bfdlink.h (bfd_link_info): Add default_imported_symver.
@@ -126,53 +108,16 @@
* dis-asm.h: Add prototype for print_insn_maxq_little.
-2004-11-05 Tomer Levi <Tomer.Levi@nsc.com>
-
- * opcode/crx.h (enum argtype): Rename types, remove unused types.
-
-2004-10-27 Richard Earnshaw <rearnsha@arm.com>
-
- * elf/arm.h: Add R_ARM_CALL and R_ARM_JUMP32.
-
-2004-10-27 Tomer Levi <Tomer.Levi@nsc.com>
-
- * opcode/crx.h (enum reg): Rearrange registers, remove 'ccfg' and `'pc'.
- (enum reg_type): Remove CRX_PC_REGTYPE, CRX_MTPR_REGTYPE.
- (enum operand_type): Rearrange operands, edit comments.
- replace us<N> with ui<N> for unsigned immediate.
- replace d<N> with disps<N>/dispu<N>/dispe<N> for signed/unsigned/escaped
- displacements (respectively).
- replace rbase_ridx_scl2_dispu<N> with rindex_disps<N> for register index.
- (instruction type): Add NO_TYPE_INS.
- (instruction flags): Add USER_REG, CST4MAP, NO_SP, NO_RPTR.
- (operand_entry): New field - 'flags'.
- (operand flags): New.
-
2004-10-26 Paul Brook <paul@codesourcery.com>
* bfdlink.h (struct bfd_link_info): Add create_default_symver.
-2004-10-21 Tomer Levi <Tomer.Levi@nsc.com>
-
- * opcode/crx.h (operand_type): Remove redundant types i3, i4,
- i5, i8, i12.
- Add new unsigned immediate types us3, us4, us5, us16.
-
2004-10-21 H.J. Lu <hongjiu.lu@intel.com>
PR 463
* bfdlink.h (bfd_link_callbacks): Add a pointer to struct
bfd_link_hash_entry to reloc_overflow.
-2004-10-12 Paul Brook <paul@codesourcery.com>
-
- * elf/arm.h (EF_ARM_EABI_VER4): Define.
-
-2004-10-08 Daniel Jacobowitz <dan@debian.org>
-
- * elf/common.h (PT_SUNW_EH_FRAME): Define.
- * elf/x86-64.h (SHT_X86_64_UNWIND): Define.
-
2004-10-07 Bob Wilson <bob.wilson@acm.org>
* xtensa-config.h (XSHAL_USE_ABSOLUTE_LITERALS,
@@ -269,22 +214,10 @@
xtensa_interface_num_bits, xtensa_interface_inout,
xtensa_interface_has_side_effect, xtensa_funcUnit_lookup,
xtensa_funcUnit_name, xtensa_funcUnit_num_copies): New prototypes.
- * elf/xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32,
- R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations.
- (XTENSA_PROP_SEC_NAME): Define.
- (property_table_entry): Add flags field.
- (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
-
2004-10-07 Jeff Baker <jbaker@qnx.com>
* bfdlink.h (bfd_link_info): Add bitfield: warn_shared_textrel.
-2004-09-17 Paul Brook <paul@codesourcery.com>
-
- * elf/arm.h: Remove R_ARM_STKCHK and R_ARM_THM_STKCHK.
- Add R_ARM_TARGET2, R_ARM_PREL31, R_ARM_GOT_ABS, R_ARM_GOT_PREL,
- R_ARM_GOT_BREL12, R_ARM_GOTOFF12 and R_ARM_GOTRELAX.
-
2004-09-17 Alan Modra <amodra@bigpond.net.au>
* bfdlink.h (struct bfd_link_hash_entry): Move und_next into elements
@@ -294,10 +227,6 @@
* libiberty.h (basename): Prototype for __MINGW32__.
-2004-09-13 Paul Brook <paul@codesourcery.com>
-
- * elf/arm.h: Rename RELABS to TARGET1.
-
2004-09-04 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* ansidecl.h (ATTRIBUTE_SENTINEL): Define.
@@ -352,8 +281,6 @@
* bfdlink.h (struct bfd_link_info): Add relro, relro_start and
relro_end fields.
- * elf/common.h (PT_GNU_EH_FRAME, PT_GNU_STACK): Add comments.
- (PT_GNU_RELRO): Define.
2004-05-04 Andreas Jaeger <aj@suse.de>
Index: elf/ChangeLog
===================================================================
RCS file: /cvs/src/src/include/elf/ChangeLog,v
retrieving revision 1.230
diff -u -p -r1.230 ChangeLog
--- elf/ChangeLog 29 Mar 2005 16:54:22 -0000 1.230
+++ elf/ChangeLog 13 Apr 2005 16:52:15 -0000
@@ -1,3 +1,35 @@
+2005-04-13 H.J. Lu <hongjiu.lu@intel.com>
+
+ 2004-10-27 Richard Earnshaw <rearnsha@arm.com>
+ * arm.h: Add R_ARM_CALL and R_ARM_JUMP32.
+
+ 2004-10-12 Paul Brook <paul@codesourcery.com>
+ * arm.h (EF_ARM_EABI_VER4): Define.
+
+ 2004-10-08 Daniel Jacobowitz <dan@debian.org>
+
+ * common.h (PT_SUNW_EH_FRAME): Define.
+ * x86-64.h (SHT_X86_64_UNWIND): Define.
+
+ 2004-10-07 Bob Wilson <bob.wilson@acm.org>
+ * xtensa.h (R_XTENSA_DIFF8, R_XTENSA_DIFF16, R_XTENSA_DIFF32,
+ R_XTENSA_SLOT*_OP, R_XTENSA_SLOT*_ALT): New relocations.
+ (XTENSA_PROP_SEC_NAME): Define.
+ (property_table_entry): Add flags field.
+ (XTENSA_PROP_*, GET_XTENSA_PROP_*, SET_XTENSA_PROP_*): Define.
+
+ 2004-09-17 Paul Brook <paul@codesourcery.com>
+ * arm.h: Remove R_ARM_STKCHK and R_ARM_THM_STKCHK.
+ Add R_ARM_TARGET2, R_ARM_PREL31, R_ARM_GOT_ABS, R_ARM_GOT_PREL,
+ R_ARM_GOT_BREL12, R_ARM_GOTOFF12 and R_ARM_GOTRELAX.
+
+ 2004-09-13 Paul Brook <paul@codesourcery.com>
+ * arm.h: Rename RELABS to TARGET1.
+
+ 2004-05-11 Jakub Jelinek <jakub@redhat.com>
+ * common.h (PT_GNU_EH_FRAME, PT_GNU_STACK): Add comments.
+ (PT_GNU_RELRO): Define.
+
2005-03-29 Daniel Jacobowitz <dan@codesourcery.com>
Phil Blundell <philb@gnu.org>
@@ -23,7 +55,7 @@
* mips.h: Define MIPS TLS relocations.
2005-02-15 Nigel Stephens <nigel@mips.com>
- Maciej W. Rozycki <macro@mips.com>
+ Maciej W. Rozycki <macro@mips.com>
* mips.h (R_MIPS16_GOT16): New reloc code.
(R_MIPS16_CALL16): Likewise.
@@ -56,8 +88,7 @@
2004-12-22 Klaus Rudolph <lts-rudolph@gmx.de>
- * include/elf/avr.h (R_AVR_LDI, R_AVR_6, R_AVR_6_ADIW): New
- relocs.
+ * avr.h (R_AVR_LDI, R_AVR_6, R_AVR_6_ADIW): New relocs.
2004-12-16 Richard Sandiford <rsandifo@redhat.com>
@@ -144,7 +175,7 @@
(R_MIPS_GNU_REL16_S2): Update comment.
2004-30-30 Galit Heller <Galit.Heller@nsc.com>
- Tomer Levi <Tomer.Levi@nsc.com>
+ Tomer Levi <Tomer.Levi@nsc.com>
* common.h (EM_CR): Define.
* cr16c.h: New file.
Index: opcode/ChangeLog
===================================================================
RCS file: /cvs/src/src/include/opcode/ChangeLog,v
retrieving revision 1.269
diff -u -p -r1.269 ChangeLog
--- opcode/ChangeLog 12 Apr 2005 17:12:30 -0000 1.269
+++ opcode/ChangeLog 13 Apr 2005 16:52:15 -0000
@@ -1,3 +1,41 @@
+2005-04-13 H.J. Lu <hongjiu.lu@intel.com>
+
+ 2005-04-12 Paul Brook <paul@codesourcery.com>
+ * m88k.h: Rename psr macros to avoid conflicts.
+
+ 2005-03-12 Zack Weinberg <zack@codesourcery.com>
+ * arm.h: Adjust comments for ARM_EXT_V4T and ARM_EXT_V5T.
+ Add ARM_EXT_V6T2, ARM_ARCH_V6T2, ARM_ARCH_V6KT2, ARM_ARCH_V6ZT2,
+ and ARM_ARCH_V6ZKT2.
+
+ 2004-11-29 Tomer Levi <Tomer.Levi@nsc.com>
+ * crx.h (enum operand_type): Rename rbase_cst4 to rbase_dispu4.
+ Remove redundant instruction types.
+ (struct argument): X_op - new field.
+ (struct cst4_entry): Remove.
+ (no_op_insn): Declare.
+
+ 2004-11-05 Tomer Levi <Tomer.Levi@nsc.com>
+ * crx.h (enum argtype): Rename types, remove unused types.
+
+ 2004-10-27 Tomer Levi <Tomer.Levi@nsc.com>
+ * crx.h (enum reg): Rearrange registers, remove 'ccfg' and `'pc'.
+ (enum reg_type): Remove CRX_PC_REGTYPE, CRX_MTPR_REGTYPE.
+ (enum operand_type): Rearrange operands, edit comments.
+ replace us<N> with ui<N> for unsigned immediate.
+ replace d<N> with disps<N>/dispu<N>/dispe<N> for signed/unsigned/escaped
+ displacements (respectively).
+ replace rbase_ridx_scl2_dispu<N> with rindex_disps<N> for register index.
+ (instruction type): Add NO_TYPE_INS.
+ (instruction flags): Add USER_REG, CST4MAP, NO_SP, NO_RPTR.
+ (operand_entry): New field - 'flags'.
+ (operand flags): New.
+
+ 2004-10-21 Tomer Levi <Tomer.Levi@nsc.com>
+ * crx.h (operand_type): Remove redundant types i3, i4,
+ i5, i8, i12.
+ Add new unsigned immediate types us3, us4, us5, us16.
+
2005-04-12 Mark Kettenis <kettenis@gnu.org>
* i386.h (i386_optab): Mark VIA PadLock instructions as ImmExt and
prev parent reply other threads:[~2005-04-13 16:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-12 23:17 H. J. Lu
2005-04-13 2:40 ` Ian Lance Taylor
2005-04-13 16:59 ` H. J. Lu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050413165832.GA31708@lucon.org \
--to=hjl@lucon.org \
--cc=Tomer.Levi@nsc.com \
--cc=binutils@sources.redhat.com \
--cc=bob.wilson@acm.org \
--cc=dan@debian.org \
--cc=jakub@redhat.com \
--cc=paul@codesourcery.com \
--cc=rearnsha@arm.com \
--cc=zack@codesourcery.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).