* [PATCH] bfd: enable silent build rules
@ 2021-11-26 3:59 Mike Frysinger
2021-11-26 4:15 ` [PATCH 1/2] binutils: " Mike Frysinger
0 siblings, 1 reply; 12+ messages in thread
From: Mike Frysinger @ 2021-11-26 3:59 UTC (permalink / raw)
To: binutils
Also add $(AM_V_xxx) to various manual rules in here.
---
binutils/Makefile.am | 100 +++++++++++++++----------------
binutils/Makefile.in | 100 +++++++++++++++----------------
binutils/configure | 43 +++++++++++++-
binutils/configure.ac | 1 +
binutils/doc/Makefile.am | 124 +++++++++++++++++++--------------------
binutils/doc/Makefile.in | 124 +++++++++++++++++++--------------------
6 files changed, 266 insertions(+), 226 deletions(-)
diff --git a/binutils/Makefile.am b/binutils/Makefile.am
index ee2a66302cdc..9ceb63da7b80 100644
--- a/binutils/Makefile.am
+++ b/binutils/Makefile.am
@@ -214,7 +214,7 @@ check-DEJAGNU: site.exp
fi
development.exp: $(BFDDIR)/development.sh
- $(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
+ $(AM_V_GEN)$(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
| $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
installcheck-local:
@@ -269,14 +269,14 @@ objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(LIBCTF) $(BFDLIB) $(LIBIB
objdump.@OBJEXT@:objdump.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
+ $(AM_V_CC)$(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
endif
cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
@@ -311,32 +311,32 @@ addr2line_SOURCES = addr2line.c $(BULIBS)
# -ln $(OBJCOPY_PROG) $(STRIP_PROG)
sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
- ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
- ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
- ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
+ $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
+ $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
+ $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
- ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
+ $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
- $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
+ $(AM_V_CCLD)$(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
- $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
+ $(AM_V_CC)$(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
sysinfo.@OBJEXT@: sysinfo.c
- if [ -r sysinfo.c ]; then \
+ $(AM_V_CC)if [ -r sysinfo.c ]; then \
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
else \
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
fi
bin2c$(EXEEXT_FOR_BUILD): bin2c.c
- $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
+ $(AM_V_CCLD)$(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
embedspu: embedspu.sh Makefile
- awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
- chmod a+x $@
+ $(AM_V_GEN)awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
+ $(AM_V_at)chmod a+x $@
# We need these for parallel make.
sysinfo.h: sysinfo.c
@@ -345,122 +345,122 @@ sysinfo.h: sysinfo.c
# yacc will produce working code which contain compile time warnings.
arparse.@OBJEXT@: arparse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
endif
arlex.@OBJEXT@: arlex.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
endif
dwarf.@OBJEXT@: dwarf.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='dwarf.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
+ $(AM_V_CC)$(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
endif
sysroff.@OBJEXT@: sysroff.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
endif
defparse.@OBJEXT@: defparse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
endif
deflex.@OBJEXT@: deflex.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
endif
rcparse.@OBJEXT@: rcparse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
endif
mcparse.@OBJEXT@: mcparse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
endif
rclex.@OBJEXT@: rclex.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
endif
mclex.@OBJEXT@: mclex.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
endif
srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
@@ -471,26 +471,26 @@ dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
dlltool.@OBJEXT@:
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
+ $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
endif
rescoff.@OBJEXT@:
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
+ $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
endif
coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
diff --git a/binutils/Makefile.in b/binutils/Makefile.in
index 8f44b5667254..1986261f9e33 100644
--- a/binutils/Makefile.in
+++ b/binutils/Makefile.in
@@ -1452,18 +1452,18 @@ check-DEJAGNU: site.exp
fi
development.exp: $(BFDDIR)/development.sh
- $(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
+ $(AM_V_GEN)$(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
| $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
installcheck-local:
/bin/sh $(srcdir)/sanity.sh $(bindir)
objdump.@OBJEXT@:objdump.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
# The following is commented out for the conversion to automake.
# This rule creates a single binary that switches between ar and ranlib
@@ -1484,32 +1484,32 @@ objdump.@OBJEXT@:objdump.c
# -ln $(OBJCOPY_PROG) $(STRIP_PROG)
sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
- ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
- ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
- ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
+ $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
+ $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
+ $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
- ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
+ $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
- $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
+ $(AM_V_CCLD)$(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
- $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
+ $(AM_V_CC)$(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
sysinfo.@OBJEXT@: sysinfo.c
- if [ -r sysinfo.c ]; then \
+ $(AM_V_CC)if [ -r sysinfo.c ]; then \
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
else \
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
fi
bin2c$(EXEEXT_FOR_BUILD): bin2c.c
- $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
+ $(AM_V_CCLD)$(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
embedspu: embedspu.sh Makefile
- awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
- chmod a+x $@
+ $(AM_V_GEN)awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
+ $(AM_V_at)chmod a+x $@
# We need these for parallel make.
sysinfo.h: sysinfo.c
@@ -1517,89 +1517,89 @@ sysinfo.h: sysinfo.c
# Disable -Werror, if it has been enabled, since old versions of bison/
# yacc will produce working code which contain compile time warnings.
arparse.@OBJEXT@: arparse.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
arlex.@OBJEXT@: arlex.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
dwarf.@OBJEXT@: dwarf.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='dwarf.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
sysroff.@OBJEXT@: sysroff.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
defparse.@OBJEXT@: defparse.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
deflex.@OBJEXT@: deflex.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
rcparse.@OBJEXT@: rcparse.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
mcparse.@OBJEXT@: mcparse.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
rclex.@OBJEXT@: rclex.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
mclex.@OBJEXT@: mclex.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
srconv.@OBJEXT@: sysroff.c
dlltool.@OBJEXT@:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
rescoff.@OBJEXT@:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
sysdump.@OBJEXT@: sysroff.c
diststuff: $(EXTRA_DIST) info
diff --git a/binutils/configure b/binutils/configure
index 2cdaeae4e690..1df56455fa7a 100755
--- a/binutils/configure
+++ b/binutils/configure
@@ -3334,6 +3334,45 @@ END
fi
fi
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=0;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -10932,7 +10971,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10935 "configure"
+#line 10974 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11038,7 +11077,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11041 "configure"
+#line 11080 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
diff --git a/binutils/configure.ac b/binutils/configure.ac
index 9d17b399aecb..b0677ba5f20e 100644
--- a/binutils/configure.ac
+++ b/binutils/configure.ac
@@ -25,6 +25,7 @@ AC_CONFIG_SRCDIR(ar.c)
AC_CANONICAL_TARGET
AM_INIT_AUTOMAKE
+AM_SILENT_RULES([yes])
AC_PROG_CC
AC_GNU_SOURCE
diff --git a/binutils/doc/Makefile.am b/binutils/doc/Makefile.am
index ba53f92560bb..90b238ddf8d9 100644
--- a/binutils/doc/Makefile.am
+++ b/binutils/doc/Makefile.am
@@ -59,114 +59,114 @@ TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
# Man page generation from texinfo
addr2line.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
- -($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
+ $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f addr2line.pod
+ $(AM_V_at)rm -f addr2line.pod
ar.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
- -($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
+ $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f ar.pod
+ $(AM_V_at)rm -f ar.pod
dlltool.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
- -($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
+ $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f dlltool.pod
+ $(AM_V_at)rm -f dlltool.pod
nm.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
- -($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
+ $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f nm.pod
+ $(AM_V_at)rm -f nm.pod
objcopy.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
- -($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
+ $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f objcopy.pod
+ $(AM_V_at)rm -f objcopy.pod
objdump.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
- -($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
+ $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f objdump.pod
+ $(AM_V_at)rm -f objdump.pod
ranlib.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
- -($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
+ $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f ranlib.pod
+ $(AM_V_at)rm -f ranlib.pod
readelf.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
- -($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
+ $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f readelf.pod
+ $(AM_V_at)rm -f readelf.pod
size.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
- -($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
+ $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f size.pod
+ $(AM_V_at)rm -f size.pod
strings.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
- -($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
+ $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f strings.pod
+ $(AM_V_at)rm -f strings.pod
strip.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
- -($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
+ $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f strip.pod
+ $(AM_V_at)rm -f strip.pod
elfedit.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
- -($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
+ $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f elfedit.pod
+ $(AM_V_at)rm -f elfedit.pod
windres.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
- -($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
+ $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f windres.pod
+ $(AM_V_at)rm -f windres.pod
windmc.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
- -($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
+ $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f windmc.pod
+ $(AM_V_at)rm -f windmc.pod
cxxfilt.man: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
- -($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
+ $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $(DEMANGLER_NAME).pod
+ $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
$(DEMANGLER_NAME).1: cxxfilt.man Makefile
- if test -f cxxfilt.man; then \
+ $(AM_V_GEN)if test -f cxxfilt.man; then \
man=cxxfilt.man; \
else \
man=$(srcdir)/cxxfilt.man; \
@@ -177,7 +177,7 @@ $(DEMANGLER_NAME).1: cxxfilt.man Makefile
html-local: binutils/index.html
binutils/index.html: binutils.texi $(binutils_TEXINFOS)
- $(AM_V_at)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
+ $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
--split=node -I$(srcdir) $(srcdir)/binutils.texi
# Maintenance
diff --git a/binutils/doc/Makefile.in b/binutils/doc/Makefile.in
index 024a642e7994..d42cdd87929b 100644
--- a/binutils/doc/Makefile.in
+++ b/binutils/doc/Makefile.in
@@ -916,112 +916,112 @@ uninstall-man: uninstall-man1
# Man page generation from texinfo
addr2line.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
- -($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
+ $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f addr2line.pod
+ $(AM_V_at)rm -f addr2line.pod
ar.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
- -($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
+ $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f ar.pod
+ $(AM_V_at)rm -f ar.pod
dlltool.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
- -($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
+ $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f dlltool.pod
+ $(AM_V_at)rm -f dlltool.pod
nm.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
- -($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
+ $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f nm.pod
+ $(AM_V_at)rm -f nm.pod
objcopy.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
- -($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
+ $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f objcopy.pod
+ $(AM_V_at)rm -f objcopy.pod
objdump.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
- -($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
+ $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f objdump.pod
+ $(AM_V_at)rm -f objdump.pod
ranlib.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
- -($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
+ $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f ranlib.pod
+ $(AM_V_at)rm -f ranlib.pod
readelf.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
- -($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
+ $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f readelf.pod
+ $(AM_V_at)rm -f readelf.pod
size.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
- -($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
+ $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f size.pod
+ $(AM_V_at)rm -f size.pod
strings.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
- -($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
+ $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f strings.pod
+ $(AM_V_at)rm -f strings.pod
strip.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
- -($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
+ $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f strip.pod
+ $(AM_V_at)rm -f strip.pod
elfedit.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
- -($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
+ $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f elfedit.pod
+ $(AM_V_at)rm -f elfedit.pod
windres.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
- -($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
+ $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f windres.pod
+ $(AM_V_at)rm -f windres.pod
windmc.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
- -($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
+ $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f windmc.pod
+ $(AM_V_at)rm -f windmc.pod
cxxfilt.man: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
- -($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
+ $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $(DEMANGLER_NAME).pod
+ $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
$(DEMANGLER_NAME).1: cxxfilt.man Makefile
- if test -f cxxfilt.man; then \
+ $(AM_V_GEN)if test -f cxxfilt.man; then \
man=cxxfilt.man; \
else \
man=$(srcdir)/cxxfilt.man; \
@@ -1032,7 +1032,7 @@ $(DEMANGLER_NAME).1: cxxfilt.man Makefile
html-local: binutils/index.html
binutils/index.html: binutils.texi $(binutils_TEXINFOS)
- $(AM_V_at)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
+ $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
--split=node -I$(srcdir) $(srcdir)/binutils.texi
# Maintenance
--
2.33.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 1/2] binutils: enable silent build rules
2021-11-26 3:59 [PATCH] bfd: enable silent build rules Mike Frysinger
@ 2021-11-26 4:15 ` Mike Frysinger
2021-11-26 4:16 ` [PATCH 2/2] binutils: merge doc subdir up a level Mike Frysinger
2021-11-29 13:31 ` [PATCH 1/2] binutils: enable silent build rules Nick Clifton
0 siblings, 2 replies; 12+ messages in thread
From: Mike Frysinger @ 2021-11-26 4:15 UTC (permalink / raw)
To: binutils
Also add $(AM_V_xxx) to various manual rules in here.
---
binutils/Makefile.am | 100 +++++++++++++++----------------
binutils/Makefile.in | 100 +++++++++++++++----------------
binutils/configure | 43 +++++++++++++-
binutils/configure.ac | 1 +
binutils/doc/Makefile.am | 124 +++++++++++++++++++--------------------
binutils/doc/Makefile.in | 124 +++++++++++++++++++--------------------
6 files changed, 266 insertions(+), 226 deletions(-)
diff --git a/binutils/Makefile.am b/binutils/Makefile.am
index ee2a66302cdc..9ceb63da7b80 100644
--- a/binutils/Makefile.am
+++ b/binutils/Makefile.am
@@ -214,7 +214,7 @@ check-DEJAGNU: site.exp
fi
development.exp: $(BFDDIR)/development.sh
- $(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
+ $(AM_V_GEN)$(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
| $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
installcheck-local:
@@ -269,14 +269,14 @@ objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(LIBCTF) $(BFDLIB) $(LIBIB
objdump.@OBJEXT@:objdump.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
+ $(AM_V_CC)$(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
endif
cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
@@ -311,32 +311,32 @@ addr2line_SOURCES = addr2line.c $(BULIBS)
# -ln $(OBJCOPY_PROG) $(STRIP_PROG)
sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
- ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
- ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
- ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
+ $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
+ $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
+ $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
- ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
+ $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
- $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
+ $(AM_V_CCLD)$(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
- $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
+ $(AM_V_CC)$(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
sysinfo.@OBJEXT@: sysinfo.c
- if [ -r sysinfo.c ]; then \
+ $(AM_V_CC)if [ -r sysinfo.c ]; then \
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
else \
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
fi
bin2c$(EXEEXT_FOR_BUILD): bin2c.c
- $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
+ $(AM_V_CCLD)$(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
embedspu: embedspu.sh Makefile
- awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
- chmod a+x $@
+ $(AM_V_GEN)awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
+ $(AM_V_at)chmod a+x $@
# We need these for parallel make.
sysinfo.h: sysinfo.c
@@ -345,122 +345,122 @@ sysinfo.h: sysinfo.c
# yacc will produce working code which contain compile time warnings.
arparse.@OBJEXT@: arparse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
endif
arlex.@OBJEXT@: arlex.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
endif
dwarf.@OBJEXT@: dwarf.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='dwarf.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
+ $(AM_V_CC)$(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
endif
sysroff.@OBJEXT@: sysroff.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
endif
defparse.@OBJEXT@: defparse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
endif
deflex.@OBJEXT@: deflex.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
endif
rcparse.@OBJEXT@: rcparse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
endif
mcparse.@OBJEXT@: mcparse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
endif
rclex.@OBJEXT@: rclex.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
endif
mclex.@OBJEXT@: mclex.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
endif
srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
@@ -471,26 +471,26 @@ dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
dlltool.@OBJEXT@:
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
+ $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
endif
rescoff.@OBJEXT@:
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
+ $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
endif
coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
diff --git a/binutils/Makefile.in b/binutils/Makefile.in
index 8f44b5667254..1986261f9e33 100644
--- a/binutils/Makefile.in
+++ b/binutils/Makefile.in
@@ -1452,18 +1452,18 @@ check-DEJAGNU: site.exp
fi
development.exp: $(BFDDIR)/development.sh
- $(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
+ $(AM_V_GEN)$(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
| $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
installcheck-local:
/bin/sh $(srcdir)/sanity.sh $(bindir)
objdump.@OBJEXT@:objdump.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
# The following is commented out for the conversion to automake.
# This rule creates a single binary that switches between ar and ranlib
@@ -1484,32 +1484,32 @@ objdump.@OBJEXT@:objdump.c
# -ln $(OBJCOPY_PROG) $(STRIP_PROG)
sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
- ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
- ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
- ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
+ $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
+ $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
+ $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
- ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
+ $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
- $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
+ $(AM_V_CCLD)$(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
- $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
+ $(AM_V_CC)$(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
sysinfo.@OBJEXT@: sysinfo.c
- if [ -r sysinfo.c ]; then \
+ $(AM_V_CC)if [ -r sysinfo.c ]; then \
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
else \
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
fi
bin2c$(EXEEXT_FOR_BUILD): bin2c.c
- $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
+ $(AM_V_CCLD)$(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
embedspu: embedspu.sh Makefile
- awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
- chmod a+x $@
+ $(AM_V_GEN)awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
+ $(AM_V_at)chmod a+x $@
# We need these for parallel make.
sysinfo.h: sysinfo.c
@@ -1517,89 +1517,89 @@ sysinfo.h: sysinfo.c
# Disable -Werror, if it has been enabled, since old versions of bison/
# yacc will produce working code which contain compile time warnings.
arparse.@OBJEXT@: arparse.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
arlex.@OBJEXT@: arlex.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
dwarf.@OBJEXT@: dwarf.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='dwarf.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
sysroff.@OBJEXT@: sysroff.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
defparse.@OBJEXT@: defparse.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
deflex.@OBJEXT@: deflex.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
rcparse.@OBJEXT@: rcparse.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
mcparse.@OBJEXT@: mcparse.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
rclex.@OBJEXT@: rclex.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
mclex.@OBJEXT@: mclex.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
srconv.@OBJEXT@: sysroff.c
dlltool.@OBJEXT@:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
rescoff.@OBJEXT@:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
sysdump.@OBJEXT@: sysroff.c
diststuff: $(EXTRA_DIST) info
diff --git a/binutils/configure b/binutils/configure
index 2cdaeae4e690..1df56455fa7a 100755
--- a/binutils/configure
+++ b/binutils/configure
@@ -3334,6 +3334,45 @@ END
fi
fi
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=0;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -10932,7 +10971,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10935 "configure"
+#line 10974 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11038,7 +11077,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11041 "configure"
+#line 11080 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
diff --git a/binutils/configure.ac b/binutils/configure.ac
index 9d17b399aecb..b0677ba5f20e 100644
--- a/binutils/configure.ac
+++ b/binutils/configure.ac
@@ -25,6 +25,7 @@ AC_CONFIG_SRCDIR(ar.c)
AC_CANONICAL_TARGET
AM_INIT_AUTOMAKE
+AM_SILENT_RULES([yes])
AC_PROG_CC
AC_GNU_SOURCE
diff --git a/binutils/doc/Makefile.am b/binutils/doc/Makefile.am
index ba53f92560bb..90b238ddf8d9 100644
--- a/binutils/doc/Makefile.am
+++ b/binutils/doc/Makefile.am
@@ -59,114 +59,114 @@ TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
# Man page generation from texinfo
addr2line.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
- -($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
+ $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f addr2line.pod
+ $(AM_V_at)rm -f addr2line.pod
ar.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
- -($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
+ $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f ar.pod
+ $(AM_V_at)rm -f ar.pod
dlltool.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
- -($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
+ $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f dlltool.pod
+ $(AM_V_at)rm -f dlltool.pod
nm.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
- -($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
+ $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f nm.pod
+ $(AM_V_at)rm -f nm.pod
objcopy.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
- -($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
+ $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f objcopy.pod
+ $(AM_V_at)rm -f objcopy.pod
objdump.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
- -($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
+ $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f objdump.pod
+ $(AM_V_at)rm -f objdump.pod
ranlib.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
- -($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
+ $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f ranlib.pod
+ $(AM_V_at)rm -f ranlib.pod
readelf.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
- -($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
+ $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f readelf.pod
+ $(AM_V_at)rm -f readelf.pod
size.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
- -($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
+ $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f size.pod
+ $(AM_V_at)rm -f size.pod
strings.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
- -($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
+ $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f strings.pod
+ $(AM_V_at)rm -f strings.pod
strip.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
- -($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
+ $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f strip.pod
+ $(AM_V_at)rm -f strip.pod
elfedit.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
- -($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
+ $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f elfedit.pod
+ $(AM_V_at)rm -f elfedit.pod
windres.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
- -($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
+ $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f windres.pod
+ $(AM_V_at)rm -f windres.pod
windmc.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
- -($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
+ $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f windmc.pod
+ $(AM_V_at)rm -f windmc.pod
cxxfilt.man: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
- -($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
+ $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $(DEMANGLER_NAME).pod
+ $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
$(DEMANGLER_NAME).1: cxxfilt.man Makefile
- if test -f cxxfilt.man; then \
+ $(AM_V_GEN)if test -f cxxfilt.man; then \
man=cxxfilt.man; \
else \
man=$(srcdir)/cxxfilt.man; \
@@ -177,7 +177,7 @@ $(DEMANGLER_NAME).1: cxxfilt.man Makefile
html-local: binutils/index.html
binutils/index.html: binutils.texi $(binutils_TEXINFOS)
- $(AM_V_at)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
+ $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
--split=node -I$(srcdir) $(srcdir)/binutils.texi
# Maintenance
diff --git a/binutils/doc/Makefile.in b/binutils/doc/Makefile.in
index 024a642e7994..d42cdd87929b 100644
--- a/binutils/doc/Makefile.in
+++ b/binutils/doc/Makefile.in
@@ -916,112 +916,112 @@ uninstall-man: uninstall-man1
# Man page generation from texinfo
addr2line.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
- -($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
+ $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f addr2line.pod
+ $(AM_V_at)rm -f addr2line.pod
ar.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
- -($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
+ $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f ar.pod
+ $(AM_V_at)rm -f ar.pod
dlltool.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
- -($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
+ $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f dlltool.pod
+ $(AM_V_at)rm -f dlltool.pod
nm.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
- -($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
+ $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f nm.pod
+ $(AM_V_at)rm -f nm.pod
objcopy.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
- -($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
+ $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f objcopy.pod
+ $(AM_V_at)rm -f objcopy.pod
objdump.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
- -($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
+ $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f objdump.pod
+ $(AM_V_at)rm -f objdump.pod
ranlib.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
- -($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
+ $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f ranlib.pod
+ $(AM_V_at)rm -f ranlib.pod
readelf.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
- -($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
+ $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f readelf.pod
+ $(AM_V_at)rm -f readelf.pod
size.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
- -($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
+ $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f size.pod
+ $(AM_V_at)rm -f size.pod
strings.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
- -($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
+ $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f strings.pod
+ $(AM_V_at)rm -f strings.pod
strip.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
- -($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
+ $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f strip.pod
+ $(AM_V_at)rm -f strip.pod
elfedit.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
- -($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
+ $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f elfedit.pod
+ $(AM_V_at)rm -f elfedit.pod
windres.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
- -($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
+ $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f windres.pod
+ $(AM_V_at)rm -f windres.pod
windmc.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
- -($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
+ $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f windmc.pod
+ $(AM_V_at)rm -f windmc.pod
cxxfilt.man: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
- -($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
+ $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $(DEMANGLER_NAME).pod
+ $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
$(DEMANGLER_NAME).1: cxxfilt.man Makefile
- if test -f cxxfilt.man; then \
+ $(AM_V_GEN)if test -f cxxfilt.man; then \
man=cxxfilt.man; \
else \
man=$(srcdir)/cxxfilt.man; \
@@ -1032,7 +1032,7 @@ $(DEMANGLER_NAME).1: cxxfilt.man Makefile
html-local: binutils/index.html
binutils/index.html: binutils.texi $(binutils_TEXINFOS)
- $(AM_V_at)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
+ $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
--split=node -I$(srcdir) $(srcdir)/binutils.texi
# Maintenance
--
2.33.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/2] binutils: merge doc subdir up a level
2021-11-26 4:15 ` [PATCH 1/2] binutils: " Mike Frysinger
@ 2021-11-26 4:16 ` Mike Frysinger
2021-11-29 13:30 ` Nick Clifton
2021-11-30 10:17 ` Luis Machado
2021-11-29 13:31 ` [PATCH 1/2] binutils: enable silent build rules Nick Clifton
1 sibling, 2 replies; 12+ messages in thread
From: Mike Frysinger @ 2021-11-26 4:16 UTC (permalink / raw)
To: binutils
This avoids a recursive make into the doc subdir and speeds up the
build slightly. It also allows for more parallelism.
---
binutils/Makefile.am | 8 +-
binutils/Makefile.in | 594 +++++++++++++-
binutils/configure.ac | 2 +-
binutils/doc/Makefile.in | 1045 ------------------------
binutils/doc/{Makefile.am => local.mk} | 102 ++-
5 files changed, 608 insertions(+), 1143 deletions(-)
delete mode 100644 binutils/doc/Makefile.in
rename binutils/doc/{Makefile.am => local.mk} (77%)
diff --git a/binutils/Makefile.am b/binutils/Makefile.am
index 9ceb63da7b80..f54dadd921dc 100644
--- a/binutils/Makefile.am
+++ b/binutils/Makefile.am
@@ -17,13 +17,15 @@
# <http://www.gnu.org/licenses/>.
#
-AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
+AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects info-in-builddir no-texinfo.tex
ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
-SUBDIRS = doc po
+SUBDIRS = po
tooldir = $(exec_prefix)/$(target_alias)
+MAINTAINERCLEANFILES =
+
## These aren't set by automake, because they appear in
## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
## thus is not seen by automake.
@@ -552,3 +554,5 @@ install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
else true; \
fi; \
done
+
+include doc/local.mk
diff --git a/binutils/Makefile.in b/binutils/Makefile.in
index 1986261f9e33..336644a3983a 100644
--- a/binutils/Makefile.in
+++ b/binutils/Makefile.in
@@ -32,6 +32,24 @@
# <http://www.gnu.org/licenses/>.
#
+#
+# Copyright (C) 2012-2021 Free Software Foundation, Inc.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; see the file COPYING3. If not see
+# <http://www.gnu.org/licenses/>.
+#
+
VPATH = @srcdir@
am__is_gnu_make = { \
@@ -167,7 +185,8 @@ am__EXEEXT_10 = objcopy$(EXEEXT)
am__EXEEXT_11 = addr2line$(EXEEXT)
am__EXEEXT_12 = readelf$(EXEEXT)
am__EXEEXT_13 = elfedit$(EXEEXT)
-am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
+ "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
am__EXEEXT_14 = nm-new$(EXEEXT)
am__EXEEXT_15 = strip-new$(EXEEXT)
am__EXEEXT_16 = cxxfilt$(EXEEXT)
@@ -356,6 +375,45 @@ SOURCES = $(addr2line_SOURCES) $(ar_SOURCES) $(EXTRA_ar_SOURCES) \
$(size_SOURCES) $(srconv_SOURCES) $(strings_SOURCES) \
$(strip_new_SOURCES) $(sysdump_SOURCES) \
testsuite/gentestdlls.c $(windmc_SOURCES) $(windres_SOURCES)
+AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
+am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
+am__v_DVIPS_0 = @echo " DVIPS " $@;
+am__v_DVIPS_1 =
+AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
+am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
+am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
+am__v_MAKEINFO_1 =
+AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
+am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
+am__v_INFOHTML_0 = @echo " INFOHTML" $@;
+am__v_INFOHTML_1 =
+AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
+am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
+am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
+am__v_TEXI2DVI_1 =
+AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
+am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
+am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
+am__v_TEXI2PDF_1 =
+AM_V_texinfo = $(am__v_texinfo_@AM_V@)
+am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
+am__v_texinfo_0 = -q
+am__v_texinfo_1 =
+AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
+am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
+am__v_texidevnull_0 = > /dev/null
+am__v_texidevnull_1 =
+INFO_DEPS = doc/binutils.info
+am__TEXINFO_TEX_DIR = $(srcdir)
+DVIS = doc/binutils.dvi
+PDFS = doc/binutils.pdf
+PSS = doc/binutils.ps
+HTMLS = doc/binutils.html
+TEXINFOS = doc/binutils.texi
+TEXI2PDF = $(TEXI2DVI) --pdf --batch
+MAKEINFOHTML = $(MAKEINFO) --html
+AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
+DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
ctags-recursive dvi-recursive html-recursive info-recursive \
install-data-recursive install-dvi-recursive \
@@ -369,6 +427,9 @@ am__can_run_installinfo = \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
@@ -569,10 +630,11 @@ top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
zlibdir = @zlibdir@
zlibinc = @zlibinc@
-AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
+AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects info-in-builddir no-texinfo.tex
ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
-SUBDIRS = doc po
+SUBDIRS = po
tooldir = $(exec_prefix)/$(target_alias)
+MAINTAINERCLEANFILES = $(man_MANS) doc/binutils.info doc/cxxfilt.man
# Automake 1.10+ disables lex and yacc output file regeneration if
# maintainer mode is disabled. Avoid this.
@@ -771,14 +833,52 @@ DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \
MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
binutils.log binutils.sum abcdefgh*
+
+# What version of the manual you want; "all" includes everything
+CONFIG = all
+
+# Options to extract the man page from as.texinfo
+MANCONF = -Dman
+TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
+POD2MAN = pod2man --center="GNU Development Tools" \
+ --release="binutils-$(VERSION)" --section=1
+
+
+# List of man pages generated from binutils.texi
+man_MANS = \
+ doc/addr2line.1 \
+ doc/ar.1 \
+ doc/dlltool.1 \
+ doc/nm.1 \
+ doc/objcopy.1 \
+ doc/objdump.1 \
+ doc/ranlib.1 \
+ doc/readelf.1 \
+ doc/size.1 \
+ doc/strings.1 \
+ doc/strip.1 \
+ doc/elfedit.1 \
+ doc/windres.1 \
+ doc/windmc.1 \
+ doc/$(DEMANGLER_NAME).1
+
+info_TEXINFOS = doc/binutils.texi
+binutils_TEXI = $(srcdir)/doc/binutils.texi
+AM_MAKEINFOFLAGS = -I "$(srcdir)/doc" -I "$(top_srcdir)/../libiberty" \
+ -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc \
+ --no-split
+
+TEXI2DVI = texi2dvi -I "$(srcdir)/doc" -I "$(top_srcdir)/../libiberty" \
+ -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
+
all: $(BUILT_SOURCES) config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
-.SUFFIXES: .c .l .lo .o .obj .y
+.SUFFIXES: .c .dvi .l .lo .o .obj .ps .y
am--refresh: Makefile
@:
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/doc/local.mk $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
@@ -800,6 +900,7 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
+$(srcdir)/doc/local.mk $(am__empty):
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
@@ -1139,6 +1240,186 @@ clean-libtool:
distclean-libtool:
-rm -f libtool config.lt
+doc/$(am__dirstamp):
+ @$(MKDIR_P) doc
+ @: > doc/$(am__dirstamp)
+
+doc/binutils.info: doc/binutils.texi
+ @test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp)
+ $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
+ rm -rf $$backupdir && mkdir $$backupdir && \
+ if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
+ for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
+ if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
+ done; \
+ else :; fi && \
+ if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
+ -o $@ `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi; \
+ then \
+ rc=0; \
+ else \
+ rc=$$?; \
+ $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
+ fi; \
+ rm -rf $$backupdir; exit $$rc
+
+doc/binutils.dvi: doc/binutils.texi doc/$(am__dirstamp)
+ $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
+ $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
+ `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi
+
+doc/binutils.pdf: doc/binutils.texi doc/$(am__dirstamp)
+ $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
+ $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
+ `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi
+
+doc/binutils.html: doc/binutils.texi doc/$(am__dirstamp)
+ $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
+ $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
+ -o $(@:.html=.htp) `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi; \
+ then \
+ rm -rf $@ && mv $(@:.html=.htp) $@; \
+ else \
+ rm -rf $(@:.html=.htp); exit 1; \
+ fi
+.dvi.ps:
+ $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
+ $(DVIPS) $(AM_V_texinfo) -o $@ $<
+
+uninstall-dvi-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
+ rm -f "$(DESTDIR)$(dvidir)/$$f"; \
+ done
+
+uninstall-html-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
+ rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
+ done
+
+uninstall-info-am:
+ @$(PRE_UNINSTALL)
+ @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
+ list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
+ if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
+ then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
+ done; \
+ else :; fi
+ @$(NORMAL_UNINSTALL)
+ @list='$(INFO_DEPS)'; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
+ (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
+ echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
+ rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
+ else :; fi); \
+ done
+
+uninstall-pdf-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
+ done
+
+uninstall-ps-am:
+ @$(NORMAL_UNINSTALL)
+ @list='$(PSS)'; test -n "$(psdir)" || list=; \
+ for p in $$list; do \
+ $(am__strip_dir) \
+ echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
+ rm -f "$(DESTDIR)$(psdir)/$$f"; \
+ done
+
+dist-info: $(INFO_DEPS)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ list='$(INFO_DEPS)'; \
+ for base in $$list; do \
+ case $$base in \
+ $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
+ esac; \
+ if test -f $$base; then d=.; else d=$(srcdir); fi; \
+ base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
+ if test -f $$file; then \
+ relfile=`expr "$$file" : "$$d/\(.*\)"`; \
+ test -f "$(distdir)/$$relfile" || \
+ cp -p $$file "$(distdir)/$$relfile"; \
+ else :; fi; \
+ done; \
+ done
+
+mostlyclean-aminfo:
+ -rm -rf doc/binutils.t2d doc/binutils.t2p
+
+clean-aminfo:
+ -test -z "doc/binutils.dvi doc/binutils.pdf doc/binutils.ps doc/binutils.html" \
+ || rm -rf doc/binutils.dvi doc/binutils.pdf doc/binutils.ps doc/binutils.html
+
+maintainer-clean-aminfo:
+ @list='$(INFO_DEPS)'; for i in $$list; do \
+ i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
+ echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
+ rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
+ done
+install-man1: $(man_MANS)
+ @$(NORMAL_INSTALL)
+ @list1=''; \
+ list2='$(man_MANS)'; \
+ test -n "$(man1dir)" \
+ && test -n "`echo $$list1$$list2`" \
+ || exit 0; \
+ echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
+ { for i in $$list1; do echo "$$i"; done; \
+ if test -n "$$list2"; then \
+ for i in $$list2; do echo "$$i"; done \
+ | sed -n '/\.1[a-z]*$$/p'; \
+ fi; \
+ } | while read p; do \
+ if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; echo "$$p"; \
+ done | \
+ sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+ sed 'N;N;s,\n, ,g' | { \
+ list=; while read file base inst; do \
+ if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+ fi; \
+ done; \
+ for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+ while read files; do \
+ test -z "$$files" || { \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+ done; }
+
+uninstall-man1:
+ @$(NORMAL_UNINSTALL)
+ @list=''; test -n "$(man1dir)" || exit 0; \
+ files=`{ for i in $$list; do echo "$$i"; done; \
+ l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+ sed -n '/\.1[a-z]*$$/p'; \
+ } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+ -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+ dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
@@ -1281,10 +1562,10 @@ check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-recursive
-all-am: Makefile $(PROGRAMS) $(SCRIPTS) config.h
+all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(SCRIPTS) $(MANS) config.h
installdirs: installdirs-recursive
installdirs-am:
- for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"; do \
+ for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: $(BUILT_SOURCES)
@@ -1315,6 +1596,7 @@ clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+ -rm -f doc/$(am__dirstamp)
-rm -f testsuite/$(DEPDIR)/$(am__dirstamp)
-rm -f testsuite/$(am__dirstamp)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
@@ -1333,9 +1615,10 @@ maintainer-clean-generic:
-rm -f rcparse.c
-rm -f rcparse.h
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive
-clean-am: clean-binPROGRAMS clean-generic clean-libtool \
+clean-am: clean-aminfo clean-binPROGRAMS clean-generic clean-libtool \
clean-noinstPROGRAMS mostlyclean-am
distclean: distclean-recursive
@@ -1348,43 +1631,134 @@ distclean-am: clean-am distclean-DEJAGNU distclean-compile \
dvi: dvi-recursive
-dvi-am:
+dvi-am: $(DVIS)
html: html-recursive
-html-am:
+html-am: $(HTMLS) html-local
info: info-recursive
-info-am:
+info-am: $(INFO_DEPS) info-local
-install-data-am:
+install-data-am: install-info-am install-man
install-dvi: install-dvi-recursive
-install-dvi-am:
-
+install-dvi-am: $(DVIS)
+ @$(NORMAL_INSTALL)
+ @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
+ done
install-exec-am: install-binPROGRAMS install-binSCRIPTS \
install-exec-local
install-html: install-html-recursive
-install-html-am:
-
+install-html-am: $(HTMLS)
+ @$(NORMAL_INSTALL)
+ @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ $(am__strip_dir) \
+ d2=$$d$$p; \
+ if test -d "$$d2"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
+ echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
+ $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
+ else \
+ list2="$$list2 $$d2"; \
+ fi; \
+ done; \
+ test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
+ done; }
install-info: install-info-recursive
-install-info-am:
-
-install-man:
+install-info-am: $(INFO_DEPS)
+ @$(NORMAL_INSTALL)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
+ fi; \
+ for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ esac; \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
+ for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
+ $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
+ if test -f $$ifile; then \
+ echo "$$ifile"; \
+ else : ; fi; \
+ done; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
+ @$(POST_INSTALL)
+ @if $(am__can_run_installinfo); then \
+ list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
+ for file in $$list; do \
+ relfile=`echo "$$file" | sed 's|^.*/||'`; \
+ echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
+ install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
+ done; \
+ else : ; fi
+install-man: install-man1
install-pdf: install-pdf-recursive
-install-pdf-am:
-
+install-pdf-am: $(PDFS)
+ @$(NORMAL_INSTALL)
+ @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive
-install-ps-am:
-
+install-ps-am: $(PSS)
+ @$(NORMAL_INSTALL)
+ @list='$(PSS)'; test -n "$(psdir)" || list=; \
+ if test -n "$$list"; then \
+ echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
+ $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
+ fi; \
+ for p in $$list; do \
+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am: installcheck-local
maintainer-clean: maintainer-clean-recursive
@@ -1392,44 +1766,52 @@ maintainer-clean: maintainer-clean-recursive
-rm -rf $(top_srcdir)/autom4te.cache
-rm -rf ./$(DEPDIR) testsuite/$(DEPDIR)
-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
+maintainer-clean-am: distclean-am maintainer-clean-aminfo \
+ maintainer-clean-generic
mostlyclean: mostlyclean-recursive
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
- mostlyclean-libtool mostlyclean-local
+mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool mostlyclean-local
pdf: pdf-recursive
-pdf-am:
+pdf-am: $(PDFS)
ps: ps-recursive
-ps-am:
+ps-am: $(PSS)
+
+uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
+ uninstall-dvi-am uninstall-html-am uninstall-info-am \
+ uninstall-man uninstall-pdf-am uninstall-ps-am
-uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS
+uninstall-man: uninstall-man1
.MAKE: $(am__recursive_targets) all check check-am install install-am \
install-strip
.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
- am--refresh check check-DEJAGNU check-am clean \
+ am--refresh check check-DEJAGNU check-am clean clean-aminfo \
clean-binPROGRAMS clean-cscope clean-generic clean-libtool \
clean-noinstPROGRAMS cscope cscopelist-am ctags ctags-am \
- distclean distclean-DEJAGNU distclean-compile \
+ dist-info distclean distclean-DEJAGNU distclean-compile \
distclean-generic distclean-hdr distclean-libtool \
- distclean-tags dvi dvi-am html html-am info info-am install \
- install-am install-binPROGRAMS install-binSCRIPTS install-data \
- install-data-am install-dvi install-dvi-am install-exec \
- install-exec-am install-exec-local install-html \
- install-html-am install-info install-info-am install-man \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installcheck-local \
- installdirs installdirs-am maintainer-clean \
- maintainer-clean-generic mostlyclean mostlyclean-compile \
- mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
- pdf-am ps ps-am tags tags-am uninstall uninstall-am \
- uninstall-binPROGRAMS uninstall-binSCRIPTS
+ distclean-tags dvi dvi-am html html-am html-local info info-am \
+ info-local install install-am install-binPROGRAMS \
+ install-binSCRIPTS install-data install-data-am install-dvi \
+ install-dvi-am install-exec install-exec-am install-exec-local \
+ install-html install-html-am install-info install-info-am \
+ install-man install-man1 install-pdf install-pdf-am install-ps \
+ install-ps-am install-strip installcheck installcheck-am \
+ installcheck-local installdirs installdirs-am maintainer-clean \
+ maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
+ mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
+ mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
+ tags-am uninstall uninstall-am uninstall-binPROGRAMS \
+ uninstall-binSCRIPTS uninstall-dvi-am uninstall-html-am \
+ uninstall-info-am uninstall-man uninstall-man1 \
+ uninstall-pdf-am uninstall-ps-am
.PRECIOUS: Makefile
@@ -1630,6 +2012,132 @@ install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
fi; \
done
+# Man page generation from texinfo
+doc/addr2line.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
+ $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f addr2line.pod
+
+doc/ar.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
+ $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f ar.pod
+
+doc/dlltool.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
+ $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f dlltool.pod
+
+doc/nm.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
+ $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f nm.pod
+
+doc/objcopy.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
+ $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f objcopy.pod
+
+doc/objdump.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
+ $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f objdump.pod
+
+doc/ranlib.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
+ $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f ranlib.pod
+
+doc/readelf.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
+ $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f readelf.pod
+
+doc/size.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
+ $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f size.pod
+
+doc/strings.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
+ $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f strings.pod
+
+doc/strip.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
+ $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f strip.pod
+
+doc/elfedit.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
+ $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f elfedit.pod
+
+doc/windres.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
+ $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f windres.pod
+
+doc/windmc.1: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
+ $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f windmc.pod
+
+doc/cxxfilt.man: $(binutils_TEXI)
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
+ $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
+ $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
+
+doc/$(DEMANGLER_NAME).1: doc/cxxfilt.man Makefile
+ $(AM_V_GEN)if test -f doc/cxxfilt.man; then \
+ man=doc/cxxfilt.man; \
+ else \
+ man=$(srcdir)/doc/cxxfilt.man; \
+ fi; \
+ sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
+ -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
+ > doc/$(DEMANGLER_NAME).1
+
+html-local: doc/binutils/index.html
+binutils/index.html: doc/binutils.texi $(binutils_TEXINFOS)
+ $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
+ --split=node -I$(srcdir) $(srcdir)/doc/binutils.texi
+
+# Maintenance
+
+# We need it for the taz target in ../Makefile.in.
+info-local: $(MANS)
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
diff --git a/binutils/configure.ac b/binutils/configure.ac
index b0677ba5f20e..62696ff2a225 100644
--- a/binutils/configure.ac
+++ b/binutils/configure.ac
@@ -535,7 +535,7 @@ AC_SUBST(docdir)
AC_SUBST(htmldir)
AC_SUBST(pdfdir)
-AC_CONFIG_FILES(Makefile doc/Makefile po/Makefile.in:po/Make-in)
+AC_CONFIG_FILES(Makefile po/Makefile.in:po/Make-in)
AC_OUTPUT
GNU_MAKE_JOBSERVER
diff --git a/binutils/doc/Makefile.in b/binutils/doc/Makefile.in
deleted file mode 100644
index d42cdd87929b..000000000000
--- a/binutils/doc/Makefile.in
+++ /dev/null
@@ -1,1045 +0,0 @@
-# Makefile.in generated by automake 1.15.1 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2017 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-#
-# Copyright (C) 2012-2021 Free Software Foundation, Inc.
-#
-# This file is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; see the file COPYING3. If not see
-# <http://www.gnu.org/licenses/>.
-#
-VPATH = @srcdir@
-am__is_gnu_make = { \
- if test -z '$(MAKELEVEL)'; then \
- false; \
- elif test -n '$(MAKE_HOST)'; then \
- true; \
- elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
- true; \
- else \
- false; \
- fi; \
-}
-am__make_running_with_option = \
- case $${target_option-} in \
- ?) ;; \
- *) echo "am__make_running_with_option: internal error: invalid" \
- "target option '$${target_option-}' specified" >&2; \
- exit 1;; \
- esac; \
- has_opt=no; \
- sane_makeflags=$$MAKEFLAGS; \
- if $(am__is_gnu_make); then \
- sane_makeflags=$$MFLAGS; \
- else \
- case $$MAKEFLAGS in \
- *\\[\ \ ]*) \
- bs=\\; \
- sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
- | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
- esac; \
- fi; \
- skip_next=no; \
- strip_trailopt () \
- { \
- flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
- }; \
- for flg in $$sane_makeflags; do \
- test $$skip_next = yes && { skip_next=no; continue; }; \
- case $$flg in \
- *=*|--*) continue;; \
- -*I) strip_trailopt 'I'; skip_next=yes;; \
- -*I?*) strip_trailopt 'I';; \
- -*O) strip_trailopt 'O'; skip_next=yes;; \
- -*O?*) strip_trailopt 'O';; \
- -*l) strip_trailopt 'l'; skip_next=yes;; \
- -*l?*) strip_trailopt 'l';; \
- -[dEDm]) skip_next=yes;; \
- -[JT]) skip_next=yes;; \
- esac; \
- case $$flg in \
- *$$target_option*) has_opt=yes; break;; \
- esac; \
- done; \
- test $$has_opt = yes
-am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-target_triplet = @target@
-subdir = doc
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
- $(top_srcdir)/../bfd/warning.m4 \
- $(top_srcdir)/../config/depstand.m4 \
- $(top_srcdir)/../config/enable.m4 \
- $(top_srcdir)/../config/gettext-sister.m4 \
- $(top_srcdir)/../config/iconv.m4 \
- $(top_srcdir)/../config/jobserver.m4 \
- $(top_srcdir)/../config/largefile.m4 \
- $(top_srcdir)/../config/lcmessage.m4 \
- $(top_srcdir)/../config/lead-dot.m4 \
- $(top_srcdir)/../config/lib-ld.m4 \
- $(top_srcdir)/../config/lib-link.m4 \
- $(top_srcdir)/../config/lib-prefix.m4 \
- $(top_srcdir)/../config/nls.m4 \
- $(top_srcdir)/../config/override.m4 \
- $(top_srcdir)/../config/pkg.m4 \
- $(top_srcdir)/../config/plugins.m4 \
- $(top_srcdir)/../config/po.m4 \
- $(top_srcdir)/../config/progtest.m4 \
- $(top_srcdir)/../config/zlib.m4 $(top_srcdir)/../libtool.m4 \
- $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
- $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
- $(top_srcdir)/../bfd/version.m4 \
- $(top_srcdir)/../config/debuginfod.m4 \
- $(top_srcdir)/configure.ac
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
- $(ACLOCAL_M4)
-DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
-mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-AM_V_P = $(am__v_P_@AM_V@)
-am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-am__v_P_0 = false
-am__v_P_1 = :
-AM_V_GEN = $(am__v_GEN_@AM_V@)
-am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-am__v_GEN_0 = @echo " GEN " $@;
-am__v_GEN_1 =
-AM_V_at = $(am__v_at_@AM_V@)
-am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-am__v_at_0 = @
-am__v_at_1 =
-SOURCES =
-DIST_SOURCES =
-AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
-am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
-am__v_DVIPS_0 = @echo " DVIPS " $@;
-am__v_DVIPS_1 =
-AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
-am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
-am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
-am__v_MAKEINFO_1 =
-AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
-am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
-am__v_INFOHTML_0 = @echo " INFOHTML" $@;
-am__v_INFOHTML_1 =
-AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
-am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
-am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
-am__v_TEXI2DVI_1 =
-AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
-am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
-am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
-am__v_TEXI2PDF_1 =
-AM_V_texinfo = $(am__v_texinfo_@AM_V@)
-am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
-am__v_texinfo_0 = -q
-am__v_texinfo_1 =
-AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
-am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
-am__v_texidevnull_0 = > /dev/null
-am__v_texidevnull_1 =
-INFO_DEPS = binutils.info
-am__TEXINFO_TEX_DIR = $(srcdir)
-DVIS = binutils.dvi
-PDFS = binutils.pdf
-PSS = binutils.ps
-HTMLS = binutils.html
-TEXINFOS = binutils.texi
-TEXI2PDF = $(TEXI2DVI) --pdf --batch
-MAKEINFOHTML = $(MAKEINFO) --html
-AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
-DVIPS = dvips
-am__can_run_installinfo = \
- case $$AM_UPDATE_INFO_DIR in \
- n|no|NO) false;; \
- *) (install-info --version) >/dev/null 2>&1;; \
- esac
-am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
- *) f=$$p;; \
- esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
- srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
- for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
- for p in $$list; do echo "$$p $$p"; done | \
- sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
- $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
- if (++n[$$2] == $(am__install_max)) \
- { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
- END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
- sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
- sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
- test -z "$$files" \
- || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
- || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
- $(am__cd) "$$dir" && rm -f $$files; }; \
- }
-man1dir = $(mandir)/man1
-NROFF = nroff
-MANS = $(man_MANS)
-am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/../mkinstalldirs
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
-AR = @AR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BUILD_DLLTOOL = @BUILD_DLLTOOL@
-BUILD_DLLWRAP = @BUILD_DLLWRAP@
-BUILD_INSTALL_MISC = @BUILD_INSTALL_MISC@
-BUILD_MISC = @BUILD_MISC@
-BUILD_SRCONV = @BUILD_SRCONV@
-BUILD_WINDMC = @BUILD_WINDMC@
-BUILD_WINDRES = @BUILD_WINDRES@
-CATALOGS = @CATALOGS@
-CATOBJEXT = @CATOBJEXT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CC_FOR_BUILD = @CC_FOR_BUILD@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DATADIRNAME = @DATADIRNAME@
-DEBUGINFOD_CFLAGS = @DEBUGINFOD_CFLAGS@
-DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@
-DEFS = @DEFS@
-DEMANGLER_NAME = @DEMANGLER_NAME@
-DEPDIR = @DEPDIR@
-DLLTOOL_DEFS = @DLLTOOL_DEFS@
-DSYMUTIL = @DSYMUTIL@
-DUMPBIN = @DUMPBIN@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EMULATION = @EMULATION@
-EMULATION_VECTOR = @EMULATION_VECTOR@
-EXEEXT = @EXEEXT@
-EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
-FGREP = @FGREP@
-GENCAT = @GENCAT@
-GMSGFMT = @GMSGFMT@
-GREP = @GREP@
-HDEFINES = @HDEFINES@
-INCINTL = @INCINTL@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INSTOBJEXT = @INSTOBJEXT@
-LARGEFILE_CPPFLAGS = @LARGEFILE_CPPFLAGS@
-LD = @LD@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBINTL_DEP = @LIBINTL_DEP@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LIBTOOL = @LIBTOOL@
-LIPO = @LIPO@
-LN_S = @LN_S@
-LTLIBICONV = @LTLIBICONV@
-LTLIBOBJS = @LTLIBOBJS@
-MAINT = @MAINT@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-MKINSTALLDIRS = @MKINSTALLDIRS@
-MSGFMT = @MSGFMT@
-MSGMERGE = @MSGMERGE@
-NM = @NM@
-NMEDIT = @NMEDIT@
-NO_WERROR = @NO_WERROR@
-OBJDUMP = @OBJDUMP@
-OBJDUMP_DEFS = @OBJDUMP_DEFS@
-OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
-OBJEXT = @OBJEXT@
-OTOOL = @OTOOL@
-OTOOL64 = @OTOOL64@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PKG_CONFIG = @PKG_CONFIG@
-PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
-PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
-POSUB = @POSUB@
-RANLIB = @RANLIB@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-USE_NLS = @USE_NLS@
-VERSION = @VERSION@
-WARN_CFLAGS = @WARN_CFLAGS@
-WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
-WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@
-XGETTEXT = @XGETTEXT@
-YACC = @YACC@
-YFLAGS = @YFLAGS@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target = @target@
-target_alias = @target_alias@
-target_cpu = @target_cpu@
-target_os = @target_os@
-target_vendor = @target_vendor@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-zlibdir = @zlibdir@
-zlibinc = @zlibinc@
-AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
-
-# What version of the manual you want; "all" includes everything
-CONFIG = all
-
-# Options to extract the man page from as.texinfo
-MANCONF = -Dman
-TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
-POD2MAN = pod2man --center="GNU Development Tools" \
- --release="binutils-$(VERSION)" --section=1
-
-
-# List of man pages generated from binutils.texi
-man_MANS = \
- addr2line.1 \
- ar.1 \
- dlltool.1 \
- nm.1 \
- objcopy.1 \
- objdump.1 \
- ranlib.1 \
- readelf.1 \
- size.1 \
- strings.1 \
- strip.1 \
- elfedit.1 \
- windres.1 \
- windmc.1 \
- $(DEMANGLER_NAME).1
-
-info_TEXINFOS = binutils.texi
-binutils_TEXI = $(srcdir)/binutils.texi
-AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
- -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc \
- --no-split
-
-TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
- -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
-
-MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .dvi .ps
-$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
- @for dep in $?; do \
- case '$(am__configure_deps)' in \
- *$$dep*) \
- ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
- && { if test -f $@; then exit 0; else break; fi; }; \
- exit 1;; \
- esac; \
- done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
- $(am__cd) $(top_srcdir) && \
- $(AUTOMAKE) --foreign doc/Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in \
- *config.status*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
- *) \
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
- cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
- esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-
-mostlyclean-libtool:
- -rm -f *.lo
-
-clean-libtool:
- -rm -rf .libs _libs
-
-binutils.info: binutils.texi
- $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
- rm -rf $$backupdir && mkdir $$backupdir && \
- if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
- for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
- if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
- done; \
- else :; fi && \
- if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
- then \
- rc=0; \
- else \
- rc=$$?; \
- $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
- fi; \
- rm -rf $$backupdir; exit $$rc
-
-binutils.dvi: binutils.texi
- $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
- `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
-
-binutils.pdf: binutils.texi
- $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
- $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
- `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
-
-binutils.html: binutils.texi
- $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
- $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
- -o $(@:.html=.htp) `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
- then \
- rm -rf $@ && mv $(@:.html=.htp) $@; \
- else \
- rm -rf $(@:.html=.htp); exit 1; \
- fi
-.dvi.ps:
- $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
- $(DVIPS) $(AM_V_texinfo) -o $@ $<
-
-uninstall-dvi-am:
- @$(NORMAL_UNINSTALL)
- @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
- rm -f "$(DESTDIR)$(dvidir)/$$f"; \
- done
-
-uninstall-html-am:
- @$(NORMAL_UNINSTALL)
- @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
- rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
- done
-
-uninstall-info-am:
- @$(PRE_UNINSTALL)
- @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
- list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
- if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
- then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
- done; \
- else :; fi
- @$(NORMAL_UNINSTALL)
- @list='$(INFO_DEPS)'; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
- (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
- echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
- rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
- else :; fi); \
- done
-
-uninstall-pdf-am:
- @$(NORMAL_UNINSTALL)
- @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
- rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
- done
-
-uninstall-ps-am:
- @$(NORMAL_UNINSTALL)
- @list='$(PSS)'; test -n "$(psdir)" || list=; \
- for p in $$list; do \
- $(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
- rm -f "$(DESTDIR)$(psdir)/$$f"; \
- done
-
-dist-info: $(INFO_DEPS)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; \
- for base in $$list; do \
- case $$base in \
- $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$base; then d=.; else d=$(srcdir); fi; \
- base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
- for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
- if test -f $$file; then \
- relfile=`expr "$$file" : "$$d/\(.*\)"`; \
- test -f "$(distdir)/$$relfile" || \
- cp -p $$file "$(distdir)/$$relfile"; \
- else :; fi; \
- done; \
- done
-
-mostlyclean-aminfo:
- -rm -rf binutils.t2d binutils.t2p
-
-clean-aminfo:
- -test -z "binutils.dvi binutils.pdf binutils.ps binutils.html" \
- || rm -rf binutils.dvi binutils.pdf binutils.ps binutils.html
-
-maintainer-clean-aminfo:
- @list='$(INFO_DEPS)'; for i in $$list; do \
- i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
- echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
- rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
- done
-install-man1: $(man_MANS)
- @$(NORMAL_INSTALL)
- @list1=''; \
- list2='$(man_MANS)'; \
- test -n "$(man1dir)" \
- && test -n "`echo $$list1$$list2`" \
- || exit 0; \
- echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
- { for i in $$list1; do echo "$$i"; done; \
- if test -n "$$list2"; then \
- for i in $$list2; do echo "$$i"; done \
- | sed -n '/\.1[a-z]*$$/p'; \
- fi; \
- } | while read p; do \
- if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; echo "$$p"; \
- done | \
- sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
- sed 'N;N;s,\n, ,g' | { \
- list=; while read file base inst; do \
- if test "$$base" = "$$inst"; then list="$$list $$file"; else \
- echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
- $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
- fi; \
- done; \
- for i in $$list; do echo "$$i"; done | $(am__base_list) | \
- while read files; do \
- test -z "$$files" || { \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
- done; }
-
-uninstall-man1:
- @$(NORMAL_UNINSTALL)
- @list=''; test -n "$(man1dir)" || exit 0; \
- files=`{ for i in $$list; do echo "$$i"; done; \
- l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
- sed -n '/\.1[a-z]*$$/p'; \
- } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
- -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
- dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
-tags TAGS:
-
-ctags CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
- list='$(DISTFILES)'; \
- dist_files=`for file in $$list; do echo $$file; done | \
- sed -e "s|^$$srcdirstrip/||;t" \
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
- case $$dist_files in \
- */*) $(MKDIR_P) `echo "$$dist_files" | \
- sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
- sort -u` ;; \
- esac; \
- for file in $$dist_files; do \
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
- if test -d $$d/$$file; then \
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
- if test -d "$(distdir)/$$file"; then \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
- find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
- fi; \
- cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
- else \
- test -f "$(distdir)/$$file" \
- || cp -p $$d/$$file "$(distdir)/$$file" \
- || exit 1; \
- fi; \
- done
- $(MAKE) $(AM_MAKEFLAGS) \
- top_distdir="$(top_distdir)" distdir="$(distdir)" \
- dist-info
-check-am: all-am
-check: check-am
-all-am: Makefile $(INFO_DEPS) $(MANS)
-installdirs:
- for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
- test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
- if test -z '$(STRIP)'; then \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- install; \
- else \
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
- "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
- fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
- -rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am: $(DVIS)
-
-html: html-am
-
-html-am: $(HTMLS) html-local
-
-info: info-am
-
-info-am: $(INFO_DEPS) info-local
-
-install-data-am: install-info-am install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am: $(DVIS)
- @$(NORMAL_INSTALL)
- @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
- done
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am: $(HTMLS)
- @$(NORMAL_INSTALL)
- @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
- $(am__strip_dir) \
- d2=$$d$$p; \
- if test -d "$$d2"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
- $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
- echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
- $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
- else \
- list2="$$list2 $$d2"; \
- fi; \
- done; \
- test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
- done; }
-install-info: install-info-am
-
-install-info-am: $(INFO_DEPS)
- @$(NORMAL_INSTALL)
- @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
- list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
- fi; \
- for file in $$list; do \
- case $$file in \
- $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
- esac; \
- if test -f $$file; then d=.; else d=$(srcdir); fi; \
- file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
- for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
- $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
- if test -f $$ifile; then \
- echo "$$ifile"; \
- else : ; fi; \
- done; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
- @$(POST_INSTALL)
- @if $(am__can_run_installinfo); then \
- list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
- for file in $$list; do \
- relfile=`echo "$$file" | sed 's|^.*/||'`; \
- echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
- install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
- done; \
- else : ; fi
-install-man: install-man1
-
-install-pdf: install-pdf-am
-
-install-pdf-am: $(PDFS)
- @$(NORMAL_INSTALL)
- @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
-install-ps: install-ps-am
-
-install-ps-am: $(PSS)
- @$(NORMAL_INSTALL)
- @list='$(PSS)'; test -n "$(psdir)" || list=; \
- if test -n "$$list"; then \
- echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
- $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
- fi; \
- for p in $$list; do \
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- echo "$$d$$p"; \
- done | $(am__base_list) | \
- while read files; do \
- echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
- $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
- -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-aminfo \
- maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
- mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am: $(PDFS)
-
-ps: ps-am
-
-ps-am: $(PSS)
-
-uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
- uninstall-man uninstall-pdf-am uninstall-ps-am
-
-uninstall-man: uninstall-man1
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
- clean-libtool cscopelist-am ctags-am dist-info distclean \
- distclean-generic distclean-libtool distdir dvi dvi-am html \
- html-am html-local info info-am info-local install install-am \
- install-data install-data-am install-dvi install-dvi-am \
- install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-man1 \
- install-pdf install-pdf-am install-ps install-ps-am \
- install-strip installcheck installcheck-am installdirs \
- maintainer-clean maintainer-clean-aminfo \
- maintainer-clean-generic mostlyclean mostlyclean-aminfo \
- mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
- tags-am uninstall uninstall-am uninstall-dvi-am \
- uninstall-html-am uninstall-info-am uninstall-man \
- uninstall-man1 uninstall-pdf-am uninstall-ps-am
-
-.PRECIOUS: Makefile
-
-
-# Man page generation from texinfo
-addr2line.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
- $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f addr2line.pod
-
-ar.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
- $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f ar.pod
-
-dlltool.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
- $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f dlltool.pod
-
-nm.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
- $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f nm.pod
-
-objcopy.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
- $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f objcopy.pod
-
-objdump.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
- $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f objdump.pod
-
-ranlib.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
- $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f ranlib.pod
-
-readelf.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
- $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f readelf.pod
-
-size.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
- $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f size.pod
-
-strings.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
- $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f strings.pod
-
-strip.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
- $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f strip.pod
-
-elfedit.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
- $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f elfedit.pod
-
-windres.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
- $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f windres.pod
-
-windmc.1: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
- $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f windmc.pod
-
-cxxfilt.man: $(binutils_TEXI)
- $(AM_V_GEN)touch $@
- $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
- $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
- mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
-
-$(DEMANGLER_NAME).1: cxxfilt.man Makefile
- $(AM_V_GEN)if test -f cxxfilt.man; then \
- man=cxxfilt.man; \
- else \
- man=$(srcdir)/cxxfilt.man; \
- fi; \
- sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
- -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
- > $(DEMANGLER_NAME).1
-
-html-local: binutils/index.html
-binutils/index.html: binutils.texi $(binutils_TEXINFOS)
- $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
- --split=node -I$(srcdir) $(srcdir)/binutils.texi
-
-# Maintenance
-
-# We need it for the taz target in ../../Makefile.in.
-info-local: $(MANS)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
diff --git a/binutils/doc/Makefile.am b/binutils/doc/local.mk
similarity index 77%
rename from binutils/doc/Makefile.am
rename to binutils/doc/local.mk
index 90b238ddf8d9..687b3f65e6cb 100644
--- a/binutils/doc/Makefile.am
+++ b/binutils/doc/local.mk
@@ -6,19 +6,17 @@
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
-#
+#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
-#
+#
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING3. If not see
# <http://www.gnu.org/licenses/>.
#
-AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
-
# What version of the manual you want; "all" includes everything
CONFIG=all
@@ -32,155 +30,155 @@ POD2MAN = pod2man --center="GNU Development Tools" \
# List of man pages generated from binutils.texi
man_MANS = \
- addr2line.1 \
- ar.1 \
- dlltool.1 \
- nm.1 \
- objcopy.1 \
- objdump.1 \
- ranlib.1 \
- readelf.1 \
- size.1 \
- strings.1 \
- strip.1 \
- elfedit.1 \
- windres.1 \
- windmc.1 \
- $(DEMANGLER_NAME).1
-
-info_TEXINFOS = binutils.texi
-binutils_TEXI = $(srcdir)/binutils.texi
-
-AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
- -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc \
+ %D%/addr2line.1 \
+ %D%/ar.1 \
+ %D%/dlltool.1 \
+ %D%/nm.1 \
+ %D%/objcopy.1 \
+ %D%/objdump.1 \
+ %D%/ranlib.1 \
+ %D%/readelf.1 \
+ %D%/size.1 \
+ %D%/strings.1 \
+ %D%/strip.1 \
+ %D%/elfedit.1 \
+ %D%/windres.1 \
+ %D%/windmc.1 \
+ %D%/$(DEMANGLER_NAME).1
+
+info_TEXINFOS = %D%/binutils.texi
+binutils_TEXI = $(srcdir)/%D%/binutils.texi
+
+AM_MAKEINFOFLAGS = -I "$(srcdir)/%D%" -I "$(top_srcdir)/../libiberty" \
+ -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc \
--no-split
-TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
- -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
+TEXI2DVI = texi2dvi -I "$(srcdir)/%D%" -I "$(top_srcdir)/../libiberty" \
+ -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
# Man page generation from texinfo
-addr2line.1: $(binutils_TEXI)
+%D%/addr2line.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
$(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f addr2line.pod
-ar.1: $(binutils_TEXI)
+%D%/ar.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
$(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f ar.pod
-dlltool.1: $(binutils_TEXI)
+%D%/dlltool.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
$(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f dlltool.pod
-nm.1: $(binutils_TEXI)
+%D%/nm.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
$(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f nm.pod
-objcopy.1: $(binutils_TEXI)
+%D%/objcopy.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
$(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f objcopy.pod
-objdump.1: $(binutils_TEXI)
+%D%/objdump.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
$(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f objdump.pod
-ranlib.1: $(binutils_TEXI)
+%D%/ranlib.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
$(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f ranlib.pod
-readelf.1: $(binutils_TEXI)
+%D%/readelf.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
$(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f readelf.pod
-size.1: $(binutils_TEXI)
+%D%/size.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
$(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f size.pod
-strings.1: $(binutils_TEXI)
+%D%/strings.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
$(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f strings.pod
-strip.1: $(binutils_TEXI)
+%D%/strip.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
$(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f strip.pod
-elfedit.1: $(binutils_TEXI)
+%D%/elfedit.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
$(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f elfedit.pod
-windres.1: $(binutils_TEXI)
+%D%/windres.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
$(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f windres.pod
-windmc.1: $(binutils_TEXI)
+%D%/windmc.1: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
$(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f windmc.pod
-cxxfilt.man: $(binutils_TEXI)
+%D%/cxxfilt.man: $(binutils_TEXI)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
$(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f $(DEMANGLER_NAME).pod
-MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
+MAINTAINERCLEANFILES += $(man_MANS) %D%/binutils.info %D%/cxxfilt.man
-$(DEMANGLER_NAME).1: cxxfilt.man Makefile
- $(AM_V_GEN)if test -f cxxfilt.man; then \
- man=cxxfilt.man; \
+%D%/$(DEMANGLER_NAME).1: %D%/cxxfilt.man Makefile
+ $(AM_V_GEN)if test -f %D%/cxxfilt.man; then \
+ man=%D%/cxxfilt.man; \
else \
- man=$(srcdir)/cxxfilt.man; \
+ man=$(srcdir)/%D%/cxxfilt.man; \
fi; \
sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
-e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
- > $(DEMANGLER_NAME).1
+ > %D%/$(DEMANGLER_NAME).1
-html-local: binutils/index.html
-binutils/index.html: binutils.texi $(binutils_TEXINFOS)
+html-local: %D%/binutils/index.html
+binutils/index.html: %D%/binutils.texi $(binutils_TEXINFOS)
$(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
- --split=node -I$(srcdir) $(srcdir)/binutils.texi
+ --split=node -I$(srcdir) $(srcdir)/%D%/binutils.texi
# Maintenance
-# We need it for the taz target in ../../Makefile.in.
+# We need it for the taz target in ../Makefile.in.
info-local: $(MANS)
--
2.33.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] binutils: merge doc subdir up a level
2021-11-26 4:16 ` [PATCH 2/2] binutils: merge doc subdir up a level Mike Frysinger
@ 2021-11-29 13:30 ` Nick Clifton
2021-11-30 10:17 ` Luis Machado
1 sibling, 0 replies; 12+ messages in thread
From: Nick Clifton @ 2021-11-29 13:30 UTC (permalink / raw)
To: Mike Frysinger, binutils
On 11/26/21 04:16, Mike Frysinger via Binutils wrote:
> This avoids a recursive make into the doc subdir and speeds up the
> build slightly. It also allows for more parallelism.
> ---
> binutils/Makefile.am | 8 +-
> binutils/Makefile.in | 594 +++++++++++++-
> binutils/configure.ac | 2 +-
> binutils/doc/Makefile.in | 1045 ------------------------
> binutils/doc/{Makefile.am => local.mk} | 102 ++-
> 5 files changed, 608 insertions(+), 1143 deletions(-)
> delete mode 100644 binutils/doc/Makefile.in
> rename binutils/doc/{Makefile.am => local.mk} (77%)
>
> diff --git a/binutils/Makefile.am b/binutils/Makefile.am
> index 9ceb63da7b80..f54dadd921dc 100644
>
Approved - please apply.
Cheers
Nick
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 1/2] binutils: enable silent build rules
2021-11-26 4:15 ` [PATCH 1/2] binutils: " Mike Frysinger
2021-11-26 4:16 ` [PATCH 2/2] binutils: merge doc subdir up a level Mike Frysinger
@ 2021-11-29 13:31 ` Nick Clifton
1 sibling, 0 replies; 12+ messages in thread
From: Nick Clifton @ 2021-11-29 13:31 UTC (permalink / raw)
To: Mike Frysinger, binutils
On 11/26/21 04:15, Mike Frysinger via Binutils wrote:
> Also add $(AM_V_xxx) to various manual rules in here.
> ---
> binutils/Makefile.am | 100 +++++++++++++++----------------
> binutils/Makefile.in | 100 +++++++++++++++----------------
> binutils/configure | 43 +++++++++++++-
> binutils/configure.ac | 1 +
> binutils/doc/Makefile.am | 124 +++++++++++++++++++--------------------
> binutils/doc/Makefile.in | 124 +++++++++++++++++++--------------------
> 6 files changed, 266 insertions(+), 226 deletions(-)
>
Approved - please apply.
Cheers
Nick
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] binutils: merge doc subdir up a level
2021-11-26 4:16 ` [PATCH 2/2] binutils: merge doc subdir up a level Mike Frysinger
2021-11-29 13:30 ` Nick Clifton
@ 2021-11-30 10:17 ` Luis Machado
2021-11-30 10:18 ` Luis Machado
2021-11-30 16:35 ` [PATCH] binutils: add missing doc/dirstamp deps Mike Frysinger
1 sibling, 2 replies; 12+ messages in thread
From: Luis Machado @ 2021-11-30 10:17 UTC (permalink / raw)
To: Mike Frysinger, binutils
Hi Mike,
It seems this patch is causing some semi-deterministic failures in
parallel builds. Sometimes it fails, other times it doesn't.
Here's the output of one that has failed:
--
GEN doc/addr2line.1
[261/1955]
GEN doc/dlltool.1
GEN doc/nm.1
touch: cannot touch 'doc/addr2line.1' GEN doc/objcopy.1
: No such file or directory
Makefile:2017: recipe for target 'doc/addr2line.1' failed
make[3]: *** [doc/addr2line.1] Error 1
make[3]: *** Waiting for unfinished jobs....
touch: cannot touch 'doc/dlltool.1': No such file or directory
GEN doc/objdump.1
GEN doc/ranlib.1
GEN doc/ar.1
Makefile:2031: recipe for target 'doc/dlltool.1' failed
make[3]: *** [doc/dlltool.1] Error 1
touch: cannot touch 'doc/objcopy.1': No such file or directory
touch: cannot touch 'doc/nm.1' GEN doc/strings.1
Makefile:2045: recipe for target 'doc/objcopy.1' failed
make[3]: *** [doc/objcopy.1] Error 1
: No such file or directory
GEN doc/readelf.1
configure: updating cache ./config.cache
touch: cannot touch 'doc/objdump.1': No such file or directory
touch: cannot touch 'doc/ranlib.1': No such file or directory
touch: cannot touch 'doc/readelf.1'touch: cannot touch 'doc/strings.1':
No such file or directory
: No such file or directory
touch: cannot touch 'doc/ar.1': No such file or directory
Makefile:2066: recipe for target 'doc/readelf.1' failed
make[3]: *** [doc/readelf.1] Error 1
GEN doc/size.1
Makefile:2024: recipe for target 'doc/ar.1' failed
make[3]: *** [doc/ar.1] Error 1
Makefile:2038: recipe for target 'doc/nm.1' failed
make[3]: *** [doc/nm.1] Error 1
Makefile:2080: recipe for target 'doc/strings.1' failed
make[3]: *** [doc/strings.1] Error 1
GEN doc/strip.1
Makefile:2052: recipe for target 'doc/objdump.1' failed
make[3]: *** [doc/objdump.1] Error 1
touch: cannot touch 'doc/strip.1': No such file or directory
make[4]: Entering directory
'/home/luis.machado/work/tcwg/builds/binutils-gdb-arm64-bionic/binutils'
checking that generated files are newer than configure... done
configure: creating ./config.status
Makefile:2059: recipe for target 'doc/ranlib.1' failed
make[3]: *** [doc/ranlib.1] Error 1
Makefile:2087: recipe for target 'doc/strip.1' failed
make[3]: *** [doc/strip.1] Error 1
touch: cannot touch 'doc/size.1': No such file or directory
Makefile:2073: recipe for target 'doc/size.1' failed
make[3]: *** [doc/size.1] Error 1
--
It is a fresh build from a clean tree. Resuming the build makes it
complete, so I suppose there is some race condition somewhere. My build
is a -j160. A -j1 completes just fine.
I'm on Ubuntu 20.04.
On 11/26/21 1:16 AM, Mike Frysinger via Binutils wrote:
> This avoids a recursive make into the doc subdir and speeds up the
> build slightly. It also allows for more parallelism.
> ---
> binutils/Makefile.am | 8 +-
> binutils/Makefile.in | 594 +++++++++++++-
> binutils/configure.ac | 2 +-
> binutils/doc/Makefile.in | 1045 ------------------------
> binutils/doc/{Makefile.am => local.mk} | 102 ++-
> 5 files changed, 608 insertions(+), 1143 deletions(-)
> delete mode 100644 binutils/doc/Makefile.in
> rename binutils/doc/{Makefile.am => local.mk} (77%)
>
> diff --git a/binutils/Makefile.am b/binutils/Makefile.am
> index 9ceb63da7b80..f54dadd921dc 100644
> --- a/binutils/Makefile.am
> +++ b/binutils/Makefile.am
> @@ -17,13 +17,15 @@
> # <http://www.gnu.org/licenses/>.
> #
>
> -AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
> +AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects info-in-builddir no-texinfo.tex
> ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
>
> -SUBDIRS = doc po
> +SUBDIRS = po
>
> tooldir = $(exec_prefix)/$(target_alias)
>
> +MAINTAINERCLEANFILES =
> +
> ## These aren't set by automake, because they appear in
> ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
> ## thus is not seen by automake.
> @@ -552,3 +554,5 @@ install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
> else true; \
> fi; \
> done
> +
> +include doc/local.mk
> diff --git a/binutils/Makefile.in b/binutils/Makefile.in
> index 1986261f9e33..336644a3983a 100644
> --- a/binutils/Makefile.in
> +++ b/binutils/Makefile.in
> @@ -32,6 +32,24 @@
> # <http://www.gnu.org/licenses/>.
> #
>
> +#
> +# Copyright (C) 2012-2021 Free Software Foundation, Inc.
> +#
> +# This file is free software; you can redistribute it and/or modify
> +# it under the terms of the GNU General Public License as published by
> +# the Free Software Foundation; either version 3 of the License, or
> +# (at your option) any later version.
> +#
> +# This program is distributed in the hope that it will be useful,
> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> +# GNU General Public License for more details.
> +#
> +# You should have received a copy of the GNU General Public License
> +# along with this program; see the file COPYING3. If not see
> +# <http://www.gnu.org/licenses/>.
> +#
> +
>
> VPATH = @srcdir@
> am__is_gnu_make = { \
> @@ -167,7 +185,8 @@ am__EXEEXT_10 = objcopy$(EXEEXT)
> am__EXEEXT_11 = addr2line$(EXEEXT)
> am__EXEEXT_12 = readelf$(EXEEXT)
> am__EXEEXT_13 = elfedit$(EXEEXT)
> -am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"
> +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
> + "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
> am__EXEEXT_14 = nm-new$(EXEEXT)
> am__EXEEXT_15 = strip-new$(EXEEXT)
> am__EXEEXT_16 = cxxfilt$(EXEEXT)
> @@ -356,6 +375,45 @@ SOURCES = $(addr2line_SOURCES) $(ar_SOURCES) $(EXTRA_ar_SOURCES) \
> $(size_SOURCES) $(srconv_SOURCES) $(strings_SOURCES) \
> $(strip_new_SOURCES) $(sysdump_SOURCES) \
> testsuite/gentestdlls.c $(windmc_SOURCES) $(windres_SOURCES)
> +AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
> +am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
> +am__v_DVIPS_0 = @echo " DVIPS " $@;
> +am__v_DVIPS_1 =
> +AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
> +am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
> +am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
> +am__v_MAKEINFO_1 =
> +AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
> +am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
> +am__v_INFOHTML_0 = @echo " INFOHTML" $@;
> +am__v_INFOHTML_1 =
> +AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
> +am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
> +am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
> +am__v_TEXI2DVI_1 =
> +AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
> +am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
> +am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
> +am__v_TEXI2PDF_1 =
> +AM_V_texinfo = $(am__v_texinfo_@AM_V@)
> +am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
> +am__v_texinfo_0 = -q
> +am__v_texinfo_1 =
> +AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
> +am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
> +am__v_texidevnull_0 = > /dev/null
> +am__v_texidevnull_1 =
> +INFO_DEPS = doc/binutils.info
> +am__TEXINFO_TEX_DIR = $(srcdir)
> +DVIS = doc/binutils.dvi
> +PDFS = doc/binutils.pdf
> +PSS = doc/binutils.ps
> +HTMLS = doc/binutils.html
> +TEXINFOS = doc/binutils.texi
> +TEXI2PDF = $(TEXI2DVI) --pdf --batch
> +MAKEINFOHTML = $(MAKEINFO) --html
> +AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
> +DVIPS = dvips
> RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
> ctags-recursive dvi-recursive html-recursive info-recursive \
> install-data-recursive install-dvi-recursive \
> @@ -369,6 +427,9 @@ am__can_run_installinfo = \
> n|no|NO) false;; \
> *) (install-info --version) >/dev/null 2>&1;; \
> esac
> +man1dir = $(mandir)/man1
> +NROFF = nroff
> +MANS = $(man_MANS)
> RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
> distclean-recursive maintainer-clean-recursive
> am__recursive_targets = \
> @@ -569,10 +630,11 @@ top_builddir = @top_builddir@
> top_srcdir = @top_srcdir@
> zlibdir = @zlibdir@
> zlibinc = @zlibinc@
> -AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
> +AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects info-in-builddir no-texinfo.tex
> ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
> -SUBDIRS = doc po
> +SUBDIRS = po
> tooldir = $(exec_prefix)/$(target_alias)
> +MAINTAINERCLEANFILES = $(man_MANS) doc/binutils.info doc/cxxfilt.man
>
> # Automake 1.10+ disables lex and yacc output file regeneration if
> # maintainer mode is disabled. Avoid this.
> @@ -771,14 +833,52 @@ DISTCLEANFILES = sysroff.c sysroff.h site.exp development.exp \
> MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD) bin2c$(EXEEXT_FOR_BUILD) \
> binutils.log binutils.sum abcdefgh*
>
> +
> +# What version of the manual you want; "all" includes everything
> +CONFIG = all
> +
> +# Options to extract the man page from as.texinfo
> +MANCONF = -Dman
> +TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
> +POD2MAN = pod2man --center="GNU Development Tools" \
> + --release="binutils-$(VERSION)" --section=1
> +
> +
> +# List of man pages generated from binutils.texi
> +man_MANS = \
> + doc/addr2line.1 \
> + doc/ar.1 \
> + doc/dlltool.1 \
> + doc/nm.1 \
> + doc/objcopy.1 \
> + doc/objdump.1 \
> + doc/ranlib.1 \
> + doc/readelf.1 \
> + doc/size.1 \
> + doc/strings.1 \
> + doc/strip.1 \
> + doc/elfedit.1 \
> + doc/windres.1 \
> + doc/windmc.1 \
> + doc/$(DEMANGLER_NAME).1
> +
> +info_TEXINFOS = doc/binutils.texi
> +binutils_TEXI = $(srcdir)/doc/binutils.texi
> +AM_MAKEINFOFLAGS = -I "$(srcdir)/doc" -I "$(top_srcdir)/../libiberty" \
> + -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc \
> + --no-split
> +
> +TEXI2DVI = texi2dvi -I "$(srcdir)/doc" -I "$(top_srcdir)/../libiberty" \
> + -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
> +
> all: $(BUILT_SOURCES) config.h
> $(MAKE) $(AM_MAKEFLAGS) all-recursive
>
> .SUFFIXES:
> -.SUFFIXES: .c .l .lo .o .obj .y
> +.SUFFIXES: .c .dvi .l .lo .o .obj .ps .y
> am--refresh: Makefile
> @:
> -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
> +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/doc/local.mk $(am__configure_deps)
> @for dep in $?; do \
> case '$(am__configure_deps)' in \
> *$$dep*) \
> @@ -800,6 +900,7 @@ Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
> echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
> cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
> esac;
> +$(srcdir)/doc/local.mk $(am__empty):
>
> $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
> $(SHELL) ./config.status --recheck
> @@ -1139,6 +1240,186 @@ clean-libtool:
>
> distclean-libtool:
> -rm -f libtool config.lt
> +doc/$(am__dirstamp):
> + @$(MKDIR_P) doc
> + @: > doc/$(am__dirstamp)
> +
> +doc/binutils.info: doc/binutils.texi
> + @test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp)
> + $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
> + rm -rf $$backupdir && mkdir $$backupdir && \
> + if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
> + for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
> + if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
> + done; \
> + else :; fi && \
> + if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
> + -o $@ `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi; \
> + then \
> + rc=0; \
> + else \
> + rc=$$?; \
> + $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
> + fi; \
> + rm -rf $$backupdir; exit $$rc
> +
> +doc/binutils.dvi: doc/binutils.texi doc/$(am__dirstamp)
> + $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
> + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
> + $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
> + `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi
> +
> +doc/binutils.pdf: doc/binutils.texi doc/$(am__dirstamp)
> + $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
> + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
> + $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
> + `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi
> +
> +doc/binutils.html: doc/binutils.texi doc/$(am__dirstamp)
> + $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
> + $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
> + -o $(@:.html=.htp) `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi; \
> + then \
> + rm -rf $@ && mv $(@:.html=.htp) $@; \
> + else \
> + rm -rf $(@:.html=.htp); exit 1; \
> + fi
> +.dvi.ps:
> + $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
> + $(DVIPS) $(AM_V_texinfo) -o $@ $<
> +
> +uninstall-dvi-am:
> + @$(NORMAL_UNINSTALL)
> + @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
> + for p in $$list; do \
> + $(am__strip_dir) \
> + echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
> + rm -f "$(DESTDIR)$(dvidir)/$$f"; \
> + done
> +
> +uninstall-html-am:
> + @$(NORMAL_UNINSTALL)
> + @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
> + for p in $$list; do \
> + $(am__strip_dir) \
> + echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
> + rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
> + done
> +
> +uninstall-info-am:
> + @$(PRE_UNINSTALL)
> + @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
> + list='$(INFO_DEPS)'; \
> + for file in $$list; do \
> + relfile=`echo "$$file" | sed 's|^.*/||'`; \
> + echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
> + if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
> + then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
> + done; \
> + else :; fi
> + @$(NORMAL_UNINSTALL)
> + @list='$(INFO_DEPS)'; \
> + for file in $$list; do \
> + relfile=`echo "$$file" | sed 's|^.*/||'`; \
> + relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
> + (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
> + echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
> + rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
> + else :; fi); \
> + done
> +
> +uninstall-pdf-am:
> + @$(NORMAL_UNINSTALL)
> + @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
> + for p in $$list; do \
> + $(am__strip_dir) \
> + echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
> + rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
> + done
> +
> +uninstall-ps-am:
> + @$(NORMAL_UNINSTALL)
> + @list='$(PSS)'; test -n "$(psdir)" || list=; \
> + for p in $$list; do \
> + $(am__strip_dir) \
> + echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
> + rm -f "$(DESTDIR)$(psdir)/$$f"; \
> + done
> +
> +dist-info: $(INFO_DEPS)
> + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
> + list='$(INFO_DEPS)'; \
> + for base in $$list; do \
> + case $$base in \
> + $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
> + esac; \
> + if test -f $$base; then d=.; else d=$(srcdir); fi; \
> + base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
> + for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
> + if test -f $$file; then \
> + relfile=`expr "$$file" : "$$d/\(.*\)"`; \
> + test -f "$(distdir)/$$relfile" || \
> + cp -p $$file "$(distdir)/$$relfile"; \
> + else :; fi; \
> + done; \
> + done
> +
> +mostlyclean-aminfo:
> + -rm -rf doc/binutils.t2d doc/binutils.t2p
> +
> +clean-aminfo:
> + -test -z "doc/binutils.dvi doc/binutils.pdf doc/binutils.ps doc/binutils.html" \
> + || rm -rf doc/binutils.dvi doc/binutils.pdf doc/binutils.ps doc/binutils.html
> +
> +maintainer-clean-aminfo:
> + @list='$(INFO_DEPS)'; for i in $$list; do \
> + i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
> + echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
> + rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
> + done
> +install-man1: $(man_MANS)
> + @$(NORMAL_INSTALL)
> + @list1=''; \
> + list2='$(man_MANS)'; \
> + test -n "$(man1dir)" \
> + && test -n "`echo $$list1$$list2`" \
> + || exit 0; \
> + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
> + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
> + { for i in $$list1; do echo "$$i"; done; \
> + if test -n "$$list2"; then \
> + for i in $$list2; do echo "$$i"; done \
> + | sed -n '/\.1[a-z]*$$/p'; \
> + fi; \
> + } | while read p; do \
> + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
> + echo "$$d$$p"; echo "$$p"; \
> + done | \
> + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
> + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
> + sed 'N;N;s,\n, ,g' | { \
> + list=; while read file base inst; do \
> + if test "$$base" = "$$inst"; then list="$$list $$file"; else \
> + echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
> + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
> + fi; \
> + done; \
> + for i in $$list; do echo "$$i"; done | $(am__base_list) | \
> + while read files; do \
> + test -z "$$files" || { \
> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
> + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
> + done; }
> +
> +uninstall-man1:
> + @$(NORMAL_UNINSTALL)
> + @list=''; test -n "$(man1dir)" || exit 0; \
> + files=`{ for i in $$list; do echo "$$i"; done; \
> + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
> + sed -n '/\.1[a-z]*$$/p'; \
> + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
> + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
> + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
>
> # This directory's subdirectories are mostly independent; you can cd
> # into them and run 'make' without going through this Makefile.
> @@ -1281,10 +1562,10 @@ check-am: all-am
> $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
> check: $(BUILT_SOURCES)
> $(MAKE) $(AM_MAKEFLAGS) check-recursive
> -all-am: Makefile $(PROGRAMS) $(SCRIPTS) config.h
> +all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(SCRIPTS) $(MANS) config.h
> installdirs: installdirs-recursive
> installdirs-am:
> - for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"; do \
> + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
> test -z "$$dir" || $(MKDIR_P) "$$dir"; \
> done
> install: $(BUILT_SOURCES)
> @@ -1315,6 +1596,7 @@ clean-generic:
> distclean-generic:
> -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
> -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
> + -rm -f doc/$(am__dirstamp)
> -rm -f testsuite/$(DEPDIR)/$(am__dirstamp)
> -rm -f testsuite/$(am__dirstamp)
> -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
> @@ -1333,9 +1615,10 @@ maintainer-clean-generic:
> -rm -f rcparse.c
> -rm -f rcparse.h
> -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
> + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
> clean: clean-recursive
>
> -clean-am: clean-binPROGRAMS clean-generic clean-libtool \
> +clean-am: clean-aminfo clean-binPROGRAMS clean-generic clean-libtool \
> clean-noinstPROGRAMS mostlyclean-am
>
> distclean: distclean-recursive
> @@ -1348,43 +1631,134 @@ distclean-am: clean-am distclean-DEJAGNU distclean-compile \
>
> dvi: dvi-recursive
>
> -dvi-am:
> +dvi-am: $(DVIS)
>
> html: html-recursive
>
> -html-am:
> +html-am: $(HTMLS) html-local
>
> info: info-recursive
>
> -info-am:
> +info-am: $(INFO_DEPS) info-local
>
> -install-data-am:
> +install-data-am: install-info-am install-man
>
> install-dvi: install-dvi-recursive
>
> -install-dvi-am:
> -
> +install-dvi-am: $(DVIS)
> + @$(NORMAL_INSTALL)
> + @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
> + if test -n "$$list"; then \
> + echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
> + $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
> + fi; \
> + for p in $$list; do \
> + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
> + echo "$$d$$p"; \
> + done | $(am__base_list) | \
> + while read files; do \
> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
> + $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
> + done
> install-exec-am: install-binPROGRAMS install-binSCRIPTS \
> install-exec-local
>
> install-html: install-html-recursive
>
> -install-html-am:
> -
> +install-html-am: $(HTMLS)
> + @$(NORMAL_INSTALL)
> + @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
> + if test -n "$$list"; then \
> + echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
> + $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
> + fi; \
> + for p in $$list; do \
> + if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
> + $(am__strip_dir) \
> + d2=$$d$$p; \
> + if test -d "$$d2"; then \
> + echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
> + $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
> + echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
> + $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
> + else \
> + list2="$$list2 $$d2"; \
> + fi; \
> + done; \
> + test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
> + while read files; do \
> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
> + $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
> + done; }
> install-info: install-info-recursive
>
> -install-info-am:
> -
> -install-man:
> +install-info-am: $(INFO_DEPS)
> + @$(NORMAL_INSTALL)
> + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
> + list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
> + if test -n "$$list"; then \
> + echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
> + $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
> + fi; \
> + for file in $$list; do \
> + case $$file in \
> + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
> + esac; \
> + if test -f $$file; then d=.; else d=$(srcdir); fi; \
> + file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
> + for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
> + $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
> + if test -f $$ifile; then \
> + echo "$$ifile"; \
> + else : ; fi; \
> + done; \
> + done | $(am__base_list) | \
> + while read files; do \
> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
> + $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
> + @$(POST_INSTALL)
> + @if $(am__can_run_installinfo); then \
> + list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
> + for file in $$list; do \
> + relfile=`echo "$$file" | sed 's|^.*/||'`; \
> + echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
> + install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
> + done; \
> + else : ; fi
> +install-man: install-man1
>
> install-pdf: install-pdf-recursive
>
> -install-pdf-am:
> -
> +install-pdf-am: $(PDFS)
> + @$(NORMAL_INSTALL)
> + @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
> + if test -n "$$list"; then \
> + echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
> + $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
> + fi; \
> + for p in $$list; do \
> + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
> + echo "$$d$$p"; \
> + done | $(am__base_list) | \
> + while read files; do \
> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
> + $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
> install-ps: install-ps-recursive
>
> -install-ps-am:
> -
> +install-ps-am: $(PSS)
> + @$(NORMAL_INSTALL)
> + @list='$(PSS)'; test -n "$(psdir)" || list=; \
> + if test -n "$$list"; then \
> + echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
> + $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
> + fi; \
> + for p in $$list; do \
> + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
> + echo "$$d$$p"; \
> + done | $(am__base_list) | \
> + while read files; do \
> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
> + $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
> installcheck-am: installcheck-local
>
> maintainer-clean: maintainer-clean-recursive
> @@ -1392,44 +1766,52 @@ maintainer-clean: maintainer-clean-recursive
> -rm -rf $(top_srcdir)/autom4te.cache
> -rm -rf ./$(DEPDIR) testsuite/$(DEPDIR)
> -rm -f Makefile
> -maintainer-clean-am: distclean-am maintainer-clean-generic
> +maintainer-clean-am: distclean-am maintainer-clean-aminfo \
> + maintainer-clean-generic
>
> mostlyclean: mostlyclean-recursive
>
> -mostlyclean-am: mostlyclean-compile mostlyclean-generic \
> - mostlyclean-libtool mostlyclean-local
> +mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
> + mostlyclean-generic mostlyclean-libtool mostlyclean-local
>
> pdf: pdf-recursive
>
> -pdf-am:
> +pdf-am: $(PDFS)
>
> ps: ps-recursive
>
> -ps-am:
> +ps-am: $(PSS)
> +
> +uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
> + uninstall-dvi-am uninstall-html-am uninstall-info-am \
> + uninstall-man uninstall-pdf-am uninstall-ps-am
>
> -uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS
> +uninstall-man: uninstall-man1
>
> .MAKE: $(am__recursive_targets) all check check-am install install-am \
> install-strip
>
> .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
> - am--refresh check check-DEJAGNU check-am clean \
> + am--refresh check check-DEJAGNU check-am clean clean-aminfo \
> clean-binPROGRAMS clean-cscope clean-generic clean-libtool \
> clean-noinstPROGRAMS cscope cscopelist-am ctags ctags-am \
> - distclean distclean-DEJAGNU distclean-compile \
> + dist-info distclean distclean-DEJAGNU distclean-compile \
> distclean-generic distclean-hdr distclean-libtool \
> - distclean-tags dvi dvi-am html html-am info info-am install \
> - install-am install-binPROGRAMS install-binSCRIPTS install-data \
> - install-data-am install-dvi install-dvi-am install-exec \
> - install-exec-am install-exec-local install-html \
> - install-html-am install-info install-info-am install-man \
> - install-pdf install-pdf-am install-ps install-ps-am \
> - install-strip installcheck installcheck-am installcheck-local \
> - installdirs installdirs-am maintainer-clean \
> - maintainer-clean-generic mostlyclean mostlyclean-compile \
> - mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
> - pdf-am ps ps-am tags tags-am uninstall uninstall-am \
> - uninstall-binPROGRAMS uninstall-binSCRIPTS
> + distclean-tags dvi dvi-am html html-am html-local info info-am \
> + info-local install install-am install-binPROGRAMS \
> + install-binSCRIPTS install-data install-data-am install-dvi \
> + install-dvi-am install-exec install-exec-am install-exec-local \
> + install-html install-html-am install-info install-info-am \
> + install-man install-man1 install-pdf install-pdf-am install-ps \
> + install-ps-am install-strip installcheck installcheck-am \
> + installcheck-local installdirs installdirs-am maintainer-clean \
> + maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
> + mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
> + mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
> + tags-am uninstall uninstall-am uninstall-binPROGRAMS \
> + uninstall-binSCRIPTS uninstall-dvi-am uninstall-html-am \
> + uninstall-info-am uninstall-man uninstall-man1 \
> + uninstall-pdf-am uninstall-ps-am
>
> .PRECIOUS: Makefile
>
> @@ -1630,6 +2012,132 @@ install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
> fi; \
> done
>
> +# Man page generation from texinfo
> +doc/addr2line.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
> + $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f addr2line.pod
> +
> +doc/ar.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
> + $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f ar.pod
> +
> +doc/dlltool.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
> + $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f dlltool.pod
> +
> +doc/nm.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
> + $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f nm.pod
> +
> +doc/objcopy.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
> + $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f objcopy.pod
> +
> +doc/objdump.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
> + $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f objdump.pod
> +
> +doc/ranlib.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
> + $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f ranlib.pod
> +
> +doc/readelf.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
> + $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f readelf.pod
> +
> +doc/size.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
> + $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f size.pod
> +
> +doc/strings.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
> + $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f strings.pod
> +
> +doc/strip.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
> + $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f strip.pod
> +
> +doc/elfedit.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
> + $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f elfedit.pod
> +
> +doc/windres.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
> + $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f windres.pod
> +
> +doc/windmc.1: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
> + $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f windmc.pod
> +
> +doc/cxxfilt.man: $(binutils_TEXI)
> + $(AM_V_GEN)touch $@
> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
> + $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> + $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
> +
> +doc/$(DEMANGLER_NAME).1: doc/cxxfilt.man Makefile
> + $(AM_V_GEN)if test -f doc/cxxfilt.man; then \
> + man=doc/cxxfilt.man; \
> + else \
> + man=$(srcdir)/doc/cxxfilt.man; \
> + fi; \
> + sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
> + -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
> + > doc/$(DEMANGLER_NAME).1
> +
> +html-local: doc/binutils/index.html
> +binutils/index.html: doc/binutils.texi $(binutils_TEXINFOS)
> + $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
> + --split=node -I$(srcdir) $(srcdir)/doc/binutils.texi
> +
> +# Maintenance
> +
> +# We need it for the taz target in ../Makefile.in.
> +info-local: $(MANS)
> +
> # Tell versions [3.59,3.63) of GNU make to not export all variables.
> # Otherwise a system limit (for SysV at least) may be exceeded.
> .NOEXPORT:
> diff --git a/binutils/configure.ac b/binutils/configure.ac
> index b0677ba5f20e..62696ff2a225 100644
> --- a/binutils/configure.ac
> +++ b/binutils/configure.ac
> @@ -535,7 +535,7 @@ AC_SUBST(docdir)
> AC_SUBST(htmldir)
> AC_SUBST(pdfdir)
>
> -AC_CONFIG_FILES(Makefile doc/Makefile po/Makefile.in:po/Make-in)
> +AC_CONFIG_FILES(Makefile po/Makefile.in:po/Make-in)
> AC_OUTPUT
>
> GNU_MAKE_JOBSERVER
> diff --git a/binutils/doc/Makefile.in b/binutils/doc/Makefile.in
> deleted file mode 100644
> index d42cdd87929b..000000000000
> --- a/binutils/doc/Makefile.in
> +++ /dev/null
> @@ -1,1045 +0,0 @@
> -# Makefile.in generated by automake 1.15.1 from Makefile.am.
> -# @configure_input@
> -
> -# Copyright (C) 1994-2017 Free Software Foundation, Inc.
> -
> -# This Makefile.in is free software; the Free Software Foundation
> -# gives unlimited permission to copy and/or distribute it,
> -# with or without modifications, as long as this notice is preserved.
> -
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
> -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
> -# PARTICULAR PURPOSE.
> -
> -@SET_MAKE@
> -
> -#
> -# Copyright (C) 2012-2021 Free Software Foundation, Inc.
> -#
> -# This file is free software; you can redistribute it and/or modify
> -# it under the terms of the GNU General Public License as published by
> -# the Free Software Foundation; either version 3 of the License, or
> -# (at your option) any later version.
> -#
> -# This program is distributed in the hope that it will be useful,
> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> -# GNU General Public License for more details.
> -#
> -# You should have received a copy of the GNU General Public License
> -# along with this program; see the file COPYING3. If not see
> -# <http://www.gnu.org/licenses/>.
> -#
> -VPATH = @srcdir@
> -am__is_gnu_make = { \
> - if test -z '$(MAKELEVEL)'; then \
> - false; \
> - elif test -n '$(MAKE_HOST)'; then \
> - true; \
> - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
> - true; \
> - else \
> - false; \
> - fi; \
> -}
> -am__make_running_with_option = \
> - case $${target_option-} in \
> - ?) ;; \
> - *) echo "am__make_running_with_option: internal error: invalid" \
> - "target option '$${target_option-}' specified" >&2; \
> - exit 1;; \
> - esac; \
> - has_opt=no; \
> - sane_makeflags=$$MAKEFLAGS; \
> - if $(am__is_gnu_make); then \
> - sane_makeflags=$$MFLAGS; \
> - else \
> - case $$MAKEFLAGS in \
> - *\\[\ \ ]*) \
> - bs=\\; \
> - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
> - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
> - esac; \
> - fi; \
> - skip_next=no; \
> - strip_trailopt () \
> - { \
> - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
> - }; \
> - for flg in $$sane_makeflags; do \
> - test $$skip_next = yes && { skip_next=no; continue; }; \
> - case $$flg in \
> - *=*|--*) continue;; \
> - -*I) strip_trailopt 'I'; skip_next=yes;; \
> - -*I?*) strip_trailopt 'I';; \
> - -*O) strip_trailopt 'O'; skip_next=yes;; \
> - -*O?*) strip_trailopt 'O';; \
> - -*l) strip_trailopt 'l'; skip_next=yes;; \
> - -*l?*) strip_trailopt 'l';; \
> - -[dEDm]) skip_next=yes;; \
> - -[JT]) skip_next=yes;; \
> - esac; \
> - case $$flg in \
> - *$$target_option*) has_opt=yes; break;; \
> - esac; \
> - done; \
> - test $$has_opt = yes
> -am__make_dryrun = (target_option=n; $(am__make_running_with_option))
> -am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
> -pkgdatadir = $(datadir)/@PACKAGE@
> -pkgincludedir = $(includedir)/@PACKAGE@
> -pkglibdir = $(libdir)/@PACKAGE@
> -pkglibexecdir = $(libexecdir)/@PACKAGE@
> -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
> -install_sh_DATA = $(install_sh) -c -m 644
> -install_sh_PROGRAM = $(install_sh) -c
> -install_sh_SCRIPT = $(install_sh) -c
> -INSTALL_HEADER = $(INSTALL_DATA)
> -transform = $(program_transform_name)
> -NORMAL_INSTALL = :
> -PRE_INSTALL = :
> -POST_INSTALL = :
> -NORMAL_UNINSTALL = :
> -PRE_UNINSTALL = :
> -POST_UNINSTALL = :
> -build_triplet = @build@
> -host_triplet = @host@
> -target_triplet = @target@
> -subdir = doc
> -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
> -am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
> - $(top_srcdir)/../bfd/warning.m4 \
> - $(top_srcdir)/../config/depstand.m4 \
> - $(top_srcdir)/../config/enable.m4 \
> - $(top_srcdir)/../config/gettext-sister.m4 \
> - $(top_srcdir)/../config/iconv.m4 \
> - $(top_srcdir)/../config/jobserver.m4 \
> - $(top_srcdir)/../config/largefile.m4 \
> - $(top_srcdir)/../config/lcmessage.m4 \
> - $(top_srcdir)/../config/lead-dot.m4 \
> - $(top_srcdir)/../config/lib-ld.m4 \
> - $(top_srcdir)/../config/lib-link.m4 \
> - $(top_srcdir)/../config/lib-prefix.m4 \
> - $(top_srcdir)/../config/nls.m4 \
> - $(top_srcdir)/../config/override.m4 \
> - $(top_srcdir)/../config/pkg.m4 \
> - $(top_srcdir)/../config/plugins.m4 \
> - $(top_srcdir)/../config/po.m4 \
> - $(top_srcdir)/../config/progtest.m4 \
> - $(top_srcdir)/../config/zlib.m4 $(top_srcdir)/../libtool.m4 \
> - $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
> - $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
> - $(top_srcdir)/../bfd/version.m4 \
> - $(top_srcdir)/../config/debuginfod.m4 \
> - $(top_srcdir)/configure.ac
> -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
> - $(ACLOCAL_M4)
> -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
> -mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
> -CONFIG_HEADER = $(top_builddir)/config.h
> -CONFIG_CLEAN_FILES =
> -CONFIG_CLEAN_VPATH_FILES =
> -AM_V_P = $(am__v_P_@AM_V@)
> -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
> -am__v_P_0 = false
> -am__v_P_1 = :
> -AM_V_GEN = $(am__v_GEN_@AM_V@)
> -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
> -am__v_GEN_0 = @echo " GEN " $@;
> -am__v_GEN_1 =
> -AM_V_at = $(am__v_at_@AM_V@)
> -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
> -am__v_at_0 = @
> -am__v_at_1 =
> -SOURCES =
> -DIST_SOURCES =
> -AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
> -am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
> -am__v_DVIPS_0 = @echo " DVIPS " $@;
> -am__v_DVIPS_1 =
> -AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
> -am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
> -am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
> -am__v_MAKEINFO_1 =
> -AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
> -am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
> -am__v_INFOHTML_0 = @echo " INFOHTML" $@;
> -am__v_INFOHTML_1 =
> -AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
> -am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
> -am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
> -am__v_TEXI2DVI_1 =
> -AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
> -am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
> -am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
> -am__v_TEXI2PDF_1 =
> -AM_V_texinfo = $(am__v_texinfo_@AM_V@)
> -am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
> -am__v_texinfo_0 = -q
> -am__v_texinfo_1 =
> -AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
> -am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
> -am__v_texidevnull_0 = > /dev/null
> -am__v_texidevnull_1 =
> -INFO_DEPS = binutils.info
> -am__TEXINFO_TEX_DIR = $(srcdir)
> -DVIS = binutils.dvi
> -PDFS = binutils.pdf
> -PSS = binutils.ps
> -HTMLS = binutils.html
> -TEXINFOS = binutils.texi
> -TEXI2PDF = $(TEXI2DVI) --pdf --batch
> -MAKEINFOHTML = $(MAKEINFO) --html
> -AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
> -DVIPS = dvips
> -am__can_run_installinfo = \
> - case $$AM_UPDATE_INFO_DIR in \
> - n|no|NO) false;; \
> - *) (install-info --version) >/dev/null 2>&1;; \
> - esac
> -am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
> -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
> -am__vpath_adj = case $$p in \
> - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
> - *) f=$$p;; \
> - esac;
> -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
> -am__install_max = 40
> -am__nobase_strip_setup = \
> - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
> -am__nobase_strip = \
> - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
> -am__nobase_list = $(am__nobase_strip_setup); \
> - for p in $$list; do echo "$$p $$p"; done | \
> - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
> - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
> - if (++n[$$2] == $(am__install_max)) \
> - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
> - END { for (dir in files) print dir, files[dir] }'
> -am__base_list = \
> - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
> - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
> -am__uninstall_files_from_dir = { \
> - test -z "$$files" \
> - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
> - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
> - $(am__cd) "$$dir" && rm -f $$files; }; \
> - }
> -man1dir = $(mandir)/man1
> -NROFF = nroff
> -MANS = $(man_MANS)
> -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
> -am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/../mkinstalldirs
> -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
> -ACLOCAL = @ACLOCAL@
> -AMTAR = @AMTAR@
> -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
> -AR = @AR@
> -AUTOCONF = @AUTOCONF@
> -AUTOHEADER = @AUTOHEADER@
> -AUTOMAKE = @AUTOMAKE@
> -AWK = @AWK@
> -BUILD_DLLTOOL = @BUILD_DLLTOOL@
> -BUILD_DLLWRAP = @BUILD_DLLWRAP@
> -BUILD_INSTALL_MISC = @BUILD_INSTALL_MISC@
> -BUILD_MISC = @BUILD_MISC@
> -BUILD_SRCONV = @BUILD_SRCONV@
> -BUILD_WINDMC = @BUILD_WINDMC@
> -BUILD_WINDRES = @BUILD_WINDRES@
> -CATALOGS = @CATALOGS@
> -CATOBJEXT = @CATOBJEXT@
> -CC = @CC@
> -CCDEPMODE = @CCDEPMODE@
> -CC_FOR_BUILD = @CC_FOR_BUILD@
> -CFLAGS = @CFLAGS@
> -CPP = @CPP@
> -CPPFLAGS = @CPPFLAGS@
> -CYGPATH_W = @CYGPATH_W@
> -DATADIRNAME = @DATADIRNAME@
> -DEBUGINFOD_CFLAGS = @DEBUGINFOD_CFLAGS@
> -DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@
> -DEFS = @DEFS@
> -DEMANGLER_NAME = @DEMANGLER_NAME@
> -DEPDIR = @DEPDIR@
> -DLLTOOL_DEFS = @DLLTOOL_DEFS@
> -DSYMUTIL = @DSYMUTIL@
> -DUMPBIN = @DUMPBIN@
> -ECHO_C = @ECHO_C@
> -ECHO_N = @ECHO_N@
> -ECHO_T = @ECHO_T@
> -EGREP = @EGREP@
> -EMULATION = @EMULATION@
> -EMULATION_VECTOR = @EMULATION_VECTOR@
> -EXEEXT = @EXEEXT@
> -EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
> -FGREP = @FGREP@
> -GENCAT = @GENCAT@
> -GMSGFMT = @GMSGFMT@
> -GREP = @GREP@
> -HDEFINES = @HDEFINES@
> -INCINTL = @INCINTL@
> -INSTALL = @INSTALL@
> -INSTALL_DATA = @INSTALL_DATA@
> -INSTALL_PROGRAM = @INSTALL_PROGRAM@
> -INSTALL_SCRIPT = @INSTALL_SCRIPT@
> -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
> -INSTOBJEXT = @INSTOBJEXT@
> -LARGEFILE_CPPFLAGS = @LARGEFILE_CPPFLAGS@
> -LD = @LD@
> -LDFLAGS = @LDFLAGS@
> -LEX = @LEX@
> -LEXLIB = @LEXLIB@
> -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
> -LIBICONV = @LIBICONV@
> -LIBINTL = @LIBINTL@
> -LIBINTL_DEP = @LIBINTL_DEP@
> -LIBOBJS = @LIBOBJS@
> -LIBS = @LIBS@
> -LIBTOOL = @LIBTOOL@
> -LIPO = @LIPO@
> -LN_S = @LN_S@
> -LTLIBICONV = @LTLIBICONV@
> -LTLIBOBJS = @LTLIBOBJS@
> -MAINT = @MAINT@
> -MAKEINFO = @MAKEINFO@
> -MKDIR_P = @MKDIR_P@
> -MKINSTALLDIRS = @MKINSTALLDIRS@
> -MSGFMT = @MSGFMT@
> -MSGMERGE = @MSGMERGE@
> -NM = @NM@
> -NMEDIT = @NMEDIT@
> -NO_WERROR = @NO_WERROR@
> -OBJDUMP = @OBJDUMP@
> -OBJDUMP_DEFS = @OBJDUMP_DEFS@
> -OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
> -OBJEXT = @OBJEXT@
> -OTOOL = @OTOOL@
> -OTOOL64 = @OTOOL64@
> -PACKAGE = @PACKAGE@
> -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
> -PACKAGE_NAME = @PACKAGE_NAME@
> -PACKAGE_STRING = @PACKAGE_STRING@
> -PACKAGE_TARNAME = @PACKAGE_TARNAME@
> -PACKAGE_URL = @PACKAGE_URL@
> -PACKAGE_VERSION = @PACKAGE_VERSION@
> -PATH_SEPARATOR = @PATH_SEPARATOR@
> -PKG_CONFIG = @PKG_CONFIG@
> -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
> -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
> -POSUB = @POSUB@
> -RANLIB = @RANLIB@
> -SED = @SED@
> -SET_MAKE = @SET_MAKE@
> -SHELL = @SHELL@
> -STRIP = @STRIP@
> -USE_NLS = @USE_NLS@
> -VERSION = @VERSION@
> -WARN_CFLAGS = @WARN_CFLAGS@
> -WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
> -WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@
> -XGETTEXT = @XGETTEXT@
> -YACC = @YACC@
> -YFLAGS = @YFLAGS@
> -abs_builddir = @abs_builddir@
> -abs_srcdir = @abs_srcdir@
> -abs_top_builddir = @abs_top_builddir@
> -abs_top_srcdir = @abs_top_srcdir@
> -ac_ct_CC = @ac_ct_CC@
> -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
> -am__include = @am__include@
> -am__leading_dot = @am__leading_dot@
> -am__quote = @am__quote@
> -am__tar = @am__tar@
> -am__untar = @am__untar@
> -bindir = @bindir@
> -build = @build@
> -build_alias = @build_alias@
> -build_cpu = @build_cpu@
> -build_os = @build_os@
> -build_vendor = @build_vendor@
> -builddir = @builddir@
> -datadir = @datadir@
> -datarootdir = @datarootdir@
> -docdir = @docdir@
> -dvidir = @dvidir@
> -exec_prefix = @exec_prefix@
> -host = @host@
> -host_alias = @host_alias@
> -host_cpu = @host_cpu@
> -host_os = @host_os@
> -host_vendor = @host_vendor@
> -htmldir = @htmldir@
> -includedir = @includedir@
> -infodir = @infodir@
> -install_sh = @install_sh@
> -libdir = @libdir@
> -libexecdir = @libexecdir@
> -localedir = @localedir@
> -localstatedir = @localstatedir@
> -mandir = @mandir@
> -mkdir_p = @mkdir_p@
> -oldincludedir = @oldincludedir@
> -pdfdir = @pdfdir@
> -prefix = @prefix@
> -program_transform_name = @program_transform_name@
> -psdir = @psdir@
> -sbindir = @sbindir@
> -sharedstatedir = @sharedstatedir@
> -srcdir = @srcdir@
> -sysconfdir = @sysconfdir@
> -target = @target@
> -target_alias = @target_alias@
> -target_cpu = @target_cpu@
> -target_os = @target_os@
> -target_vendor = @target_vendor@
> -top_build_prefix = @top_build_prefix@
> -top_builddir = @top_builddir@
> -top_srcdir = @top_srcdir@
> -zlibdir = @zlibdir@
> -zlibinc = @zlibinc@
> -AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
> -
> -# What version of the manual you want; "all" includes everything
> -CONFIG = all
> -
> -# Options to extract the man page from as.texinfo
> -MANCONF = -Dman
> -TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
> -POD2MAN = pod2man --center="GNU Development Tools" \
> - --release="binutils-$(VERSION)" --section=1
> -
> -
> -# List of man pages generated from binutils.texi
> -man_MANS = \
> - addr2line.1 \
> - ar.1 \
> - dlltool.1 \
> - nm.1 \
> - objcopy.1 \
> - objdump.1 \
> - ranlib.1 \
> - readelf.1 \
> - size.1 \
> - strings.1 \
> - strip.1 \
> - elfedit.1 \
> - windres.1 \
> - windmc.1 \
> - $(DEMANGLER_NAME).1
> -
> -info_TEXINFOS = binutils.texi
> -binutils_TEXI = $(srcdir)/binutils.texi
> -AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
> - -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc \
> - --no-split
> -
> -TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
> - -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
> -
> -MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
> -all: all-am
> -
> -.SUFFIXES:
> -.SUFFIXES: .dvi .ps
> -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
> - @for dep in $?; do \
> - case '$(am__configure_deps)' in \
> - *$$dep*) \
> - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
> - && { if test -f $@; then exit 0; else break; fi; }; \
> - exit 1;; \
> - esac; \
> - done; \
> - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
> - $(am__cd) $(top_srcdir) && \
> - $(AUTOMAKE) --foreign doc/Makefile
> -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
> - @case '$?' in \
> - *config.status*) \
> - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
> - *) \
> - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
> - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
> - esac;
> -
> -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
> - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
> -
> -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
> - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
> -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
> - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
> -$(am__aclocal_m4_deps):
> -
> -mostlyclean-libtool:
> - -rm -f *.lo
> -
> -clean-libtool:
> - -rm -rf .libs _libs
> -
> -binutils.info: binutils.texi
> - $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
> - rm -rf $$backupdir && mkdir $$backupdir && \
> - if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
> - for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
> - if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
> - done; \
> - else :; fi && \
> - if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
> - -o $@ `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
> - then \
> - rc=0; \
> - else \
> - rc=$$?; \
> - $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
> - fi; \
> - rm -rf $$backupdir; exit $$rc
> -
> -binutils.dvi: binutils.texi
> - $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
> - MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
> - $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
> - `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
> -
> -binutils.pdf: binutils.texi
> - $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
> - MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
> - $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
> - `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
> -
> -binutils.html: binutils.texi
> - $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
> - $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
> - -o $(@:.html=.htp) `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi; \
> - then \
> - rm -rf $@ && mv $(@:.html=.htp) $@; \
> - else \
> - rm -rf $(@:.html=.htp); exit 1; \
> - fi
> -.dvi.ps:
> - $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
> - $(DVIPS) $(AM_V_texinfo) -o $@ $<
> -
> -uninstall-dvi-am:
> - @$(NORMAL_UNINSTALL)
> - @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
> - for p in $$list; do \
> - $(am__strip_dir) \
> - echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
> - rm -f "$(DESTDIR)$(dvidir)/$$f"; \
> - done
> -
> -uninstall-html-am:
> - @$(NORMAL_UNINSTALL)
> - @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
> - for p in $$list; do \
> - $(am__strip_dir) \
> - echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
> - rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
> - done
> -
> -uninstall-info-am:
> - @$(PRE_UNINSTALL)
> - @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
> - list='$(INFO_DEPS)'; \
> - for file in $$list; do \
> - relfile=`echo "$$file" | sed 's|^.*/||'`; \
> - echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
> - if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
> - then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
> - done; \
> - else :; fi
> - @$(NORMAL_UNINSTALL)
> - @list='$(INFO_DEPS)'; \
> - for file in $$list; do \
> - relfile=`echo "$$file" | sed 's|^.*/||'`; \
> - relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
> - (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
> - echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
> - rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
> - else :; fi); \
> - done
> -
> -uninstall-pdf-am:
> - @$(NORMAL_UNINSTALL)
> - @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
> - for p in $$list; do \
> - $(am__strip_dir) \
> - echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
> - rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
> - done
> -
> -uninstall-ps-am:
> - @$(NORMAL_UNINSTALL)
> - @list='$(PSS)'; test -n "$(psdir)" || list=; \
> - for p in $$list; do \
> - $(am__strip_dir) \
> - echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
> - rm -f "$(DESTDIR)$(psdir)/$$f"; \
> - done
> -
> -dist-info: $(INFO_DEPS)
> - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
> - list='$(INFO_DEPS)'; \
> - for base in $$list; do \
> - case $$base in \
> - $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
> - esac; \
> - if test -f $$base; then d=.; else d=$(srcdir); fi; \
> - base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
> - for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
> - if test -f $$file; then \
> - relfile=`expr "$$file" : "$$d/\(.*\)"`; \
> - test -f "$(distdir)/$$relfile" || \
> - cp -p $$file "$(distdir)/$$relfile"; \
> - else :; fi; \
> - done; \
> - done
> -
> -mostlyclean-aminfo:
> - -rm -rf binutils.t2d binutils.t2p
> -
> -clean-aminfo:
> - -test -z "binutils.dvi binutils.pdf binutils.ps binutils.html" \
> - || rm -rf binutils.dvi binutils.pdf binutils.ps binutils.html
> -
> -maintainer-clean-aminfo:
> - @list='$(INFO_DEPS)'; for i in $$list; do \
> - i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
> - echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
> - rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
> - done
> -install-man1: $(man_MANS)
> - @$(NORMAL_INSTALL)
> - @list1=''; \
> - list2='$(man_MANS)'; \
> - test -n "$(man1dir)" \
> - && test -n "`echo $$list1$$list2`" \
> - || exit 0; \
> - echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
> - $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
> - { for i in $$list1; do echo "$$i"; done; \
> - if test -n "$$list2"; then \
> - for i in $$list2; do echo "$$i"; done \
> - | sed -n '/\.1[a-z]*$$/p'; \
> - fi; \
> - } | while read p; do \
> - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
> - echo "$$d$$p"; echo "$$p"; \
> - done | \
> - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
> - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
> - sed 'N;N;s,\n, ,g' | { \
> - list=; while read file base inst; do \
> - if test "$$base" = "$$inst"; then list="$$list $$file"; else \
> - echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
> - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
> - fi; \
> - done; \
> - for i in $$list; do echo "$$i"; done | $(am__base_list) | \
> - while read files; do \
> - test -z "$$files" || { \
> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
> - $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
> - done; }
> -
> -uninstall-man1:
> - @$(NORMAL_UNINSTALL)
> - @list=''; test -n "$(man1dir)" || exit 0; \
> - files=`{ for i in $$list; do echo "$$i"; done; \
> - l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
> - sed -n '/\.1[a-z]*$$/p'; \
> - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
> - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
> - dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
> -tags TAGS:
> -
> -ctags CTAGS:
> -
> -cscope cscopelist:
> -
> -
> -distdir: $(DISTFILES)
> - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
> - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
> - list='$(DISTFILES)'; \
> - dist_files=`for file in $$list; do echo $$file; done | \
> - sed -e "s|^$$srcdirstrip/||;t" \
> - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
> - case $$dist_files in \
> - */*) $(MKDIR_P) `echo "$$dist_files" | \
> - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
> - sort -u` ;; \
> - esac; \
> - for file in $$dist_files; do \
> - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
> - if test -d $$d/$$file; then \
> - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
> - if test -d "$(distdir)/$$file"; then \
> - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
> - fi; \
> - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
> - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
> - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
> - fi; \
> - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
> - else \
> - test -f "$(distdir)/$$file" \
> - || cp -p $$d/$$file "$(distdir)/$$file" \
> - || exit 1; \
> - fi; \
> - done
> - $(MAKE) $(AM_MAKEFLAGS) \
> - top_distdir="$(top_distdir)" distdir="$(distdir)" \
> - dist-info
> -check-am: all-am
> -check: check-am
> -all-am: Makefile $(INFO_DEPS) $(MANS)
> -installdirs:
> - for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
> - test -z "$$dir" || $(MKDIR_P) "$$dir"; \
> - done
> -install: install-am
> -install-exec: install-exec-am
> -install-data: install-data-am
> -uninstall: uninstall-am
> -
> -install-am: all-am
> - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
> -
> -installcheck: installcheck-am
> -install-strip:
> - if test -z '$(STRIP)'; then \
> - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
> - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
> - install; \
> - else \
> - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
> - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
> - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
> - fi
> -mostlyclean-generic:
> -
> -clean-generic:
> -
> -distclean-generic:
> - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
> - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
> -
> -maintainer-clean-generic:
> - @echo "This command is intended for maintainers to use"
> - @echo "it deletes files that may require special tools to rebuild."
> - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
> -clean: clean-am
> -
> -clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
> -
> -distclean: distclean-am
> - -rm -f Makefile
> -distclean-am: clean-am distclean-generic
> -
> -dvi: dvi-am
> -
> -dvi-am: $(DVIS)
> -
> -html: html-am
> -
> -html-am: $(HTMLS) html-local
> -
> -info: info-am
> -
> -info-am: $(INFO_DEPS) info-local
> -
> -install-data-am: install-info-am install-man
> -
> -install-dvi: install-dvi-am
> -
> -install-dvi-am: $(DVIS)
> - @$(NORMAL_INSTALL)
> - @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
> - if test -n "$$list"; then \
> - echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
> - $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
> - fi; \
> - for p in $$list; do \
> - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
> - echo "$$d$$p"; \
> - done | $(am__base_list) | \
> - while read files; do \
> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
> - $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
> - done
> -install-exec-am:
> -
> -install-html: install-html-am
> -
> -install-html-am: $(HTMLS)
> - @$(NORMAL_INSTALL)
> - @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
> - if test -n "$$list"; then \
> - echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
> - $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
> - fi; \
> - for p in $$list; do \
> - if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
> - $(am__strip_dir) \
> - d2=$$d$$p; \
> - if test -d "$$d2"; then \
> - echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
> - $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
> - echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
> - $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
> - else \
> - list2="$$list2 $$d2"; \
> - fi; \
> - done; \
> - test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
> - while read files; do \
> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
> - $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
> - done; }
> -install-info: install-info-am
> -
> -install-info-am: $(INFO_DEPS)
> - @$(NORMAL_INSTALL)
> - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
> - list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
> - if test -n "$$list"; then \
> - echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
> - $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
> - fi; \
> - for file in $$list; do \
> - case $$file in \
> - $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
> - esac; \
> - if test -f $$file; then d=.; else d=$(srcdir); fi; \
> - file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
> - for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
> - $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
> - if test -f $$ifile; then \
> - echo "$$ifile"; \
> - else : ; fi; \
> - done; \
> - done | $(am__base_list) | \
> - while read files; do \
> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
> - $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
> - @$(POST_INSTALL)
> - @if $(am__can_run_installinfo); then \
> - list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
> - for file in $$list; do \
> - relfile=`echo "$$file" | sed 's|^.*/||'`; \
> - echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
> - install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
> - done; \
> - else : ; fi
> -install-man: install-man1
> -
> -install-pdf: install-pdf-am
> -
> -install-pdf-am: $(PDFS)
> - @$(NORMAL_INSTALL)
> - @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
> - if test -n "$$list"; then \
> - echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
> - $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
> - fi; \
> - for p in $$list; do \
> - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
> - echo "$$d$$p"; \
> - done | $(am__base_list) | \
> - while read files; do \
> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
> - $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
> -install-ps: install-ps-am
> -
> -install-ps-am: $(PSS)
> - @$(NORMAL_INSTALL)
> - @list='$(PSS)'; test -n "$(psdir)" || list=; \
> - if test -n "$$list"; then \
> - echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
> - $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
> - fi; \
> - for p in $$list; do \
> - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
> - echo "$$d$$p"; \
> - done | $(am__base_list) | \
> - while read files; do \
> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
> - $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
> -installcheck-am:
> -
> -maintainer-clean: maintainer-clean-am
> - -rm -f Makefile
> -maintainer-clean-am: distclean-am maintainer-clean-aminfo \
> - maintainer-clean-generic
> -
> -mostlyclean: mostlyclean-am
> -
> -mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
> - mostlyclean-libtool
> -
> -pdf: pdf-am
> -
> -pdf-am: $(PDFS)
> -
> -ps: ps-am
> -
> -ps-am: $(PSS)
> -
> -uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
> - uninstall-man uninstall-pdf-am uninstall-ps-am
> -
> -uninstall-man: uninstall-man1
> -
> -.MAKE: install-am install-strip
> -
> -.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
> - clean-libtool cscopelist-am ctags-am dist-info distclean \
> - distclean-generic distclean-libtool distdir dvi dvi-am html \
> - html-am html-local info info-am info-local install install-am \
> - install-data install-data-am install-dvi install-dvi-am \
> - install-exec install-exec-am install-html install-html-am \
> - install-info install-info-am install-man install-man1 \
> - install-pdf install-pdf-am install-ps install-ps-am \
> - install-strip installcheck installcheck-am installdirs \
> - maintainer-clean maintainer-clean-aminfo \
> - maintainer-clean-generic mostlyclean mostlyclean-aminfo \
> - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
> - tags-am uninstall uninstall-am uninstall-dvi-am \
> - uninstall-html-am uninstall-info-am uninstall-man \
> - uninstall-man1 uninstall-pdf-am uninstall-ps-am
> -
> -.PRECIOUS: Makefile
> -
> -
> -# Man page generation from texinfo
> -addr2line.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
> - $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f addr2line.pod
> -
> -ar.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
> - $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f ar.pod
> -
> -dlltool.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
> - $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f dlltool.pod
> -
> -nm.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
> - $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f nm.pod
> -
> -objcopy.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
> - $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f objcopy.pod
> -
> -objdump.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
> - $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f objdump.pod
> -
> -ranlib.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
> - $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f ranlib.pod
> -
> -readelf.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
> - $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f readelf.pod
> -
> -size.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
> - $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f size.pod
> -
> -strings.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
> - $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f strings.pod
> -
> -strip.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
> - $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f strip.pod
> -
> -elfedit.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
> - $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f elfedit.pod
> -
> -windres.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
> - $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f windres.pod
> -
> -windmc.1: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
> - $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f windmc.pod
> -
> -cxxfilt.man: $(binutils_TEXI)
> - $(AM_V_GEN)touch $@
> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
> - $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> - $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
> -
> -$(DEMANGLER_NAME).1: cxxfilt.man Makefile
> - $(AM_V_GEN)if test -f cxxfilt.man; then \
> - man=cxxfilt.man; \
> - else \
> - man=$(srcdir)/cxxfilt.man; \
> - fi; \
> - sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
> - -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
> - > $(DEMANGLER_NAME).1
> -
> -html-local: binutils/index.html
> -binutils/index.html: binutils.texi $(binutils_TEXINFOS)
> - $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
> - --split=node -I$(srcdir) $(srcdir)/binutils.texi
> -
> -# Maintenance
> -
> -# We need it for the taz target in ../../Makefile.in.
> -info-local: $(MANS)
> -
> -# Tell versions [3.59,3.63) of GNU make to not export all variables.
> -# Otherwise a system limit (for SysV at least) may be exceeded.
> -.NOEXPORT:
> diff --git a/binutils/doc/Makefile.am b/binutils/doc/local.mk
> similarity index 77%
> rename from binutils/doc/Makefile.am
> rename to binutils/doc/local.mk
> index 90b238ddf8d9..687b3f65e6cb 100644
> --- a/binutils/doc/Makefile.am
> +++ b/binutils/doc/local.mk
> @@ -6,19 +6,17 @@
> # it under the terms of the GNU General Public License as published by
> # the Free Software Foundation; either version 3 of the License, or
> # (at your option) any later version.
> -#
> +#
> # This program is distributed in the hope that it will be useful,
> # but WITHOUT ANY WARRANTY; without even the implied warranty of
> # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> # GNU General Public License for more details.
> -#
> +#
> # You should have received a copy of the GNU General Public License
> # along with this program; see the file COPYING3. If not see
> # <http://www.gnu.org/licenses/>.
> #
>
> -AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
> -
> # What version of the manual you want; "all" includes everything
> CONFIG=all
>
> @@ -32,155 +30,155 @@ POD2MAN = pod2man --center="GNU Development Tools" \
>
> # List of man pages generated from binutils.texi
> man_MANS = \
> - addr2line.1 \
> - ar.1 \
> - dlltool.1 \
> - nm.1 \
> - objcopy.1 \
> - objdump.1 \
> - ranlib.1 \
> - readelf.1 \
> - size.1 \
> - strings.1 \
> - strip.1 \
> - elfedit.1 \
> - windres.1 \
> - windmc.1 \
> - $(DEMANGLER_NAME).1
> -
> -info_TEXINFOS = binutils.texi
> -binutils_TEXI = $(srcdir)/binutils.texi
> -
> -AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
> - -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc \
> + %D%/addr2line.1 \
> + %D%/ar.1 \
> + %D%/dlltool.1 \
> + %D%/nm.1 \
> + %D%/objcopy.1 \
> + %D%/objdump.1 \
> + %D%/ranlib.1 \
> + %D%/readelf.1 \
> + %D%/size.1 \
> + %D%/strings.1 \
> + %D%/strip.1 \
> + %D%/elfedit.1 \
> + %D%/windres.1 \
> + %D%/windmc.1 \
> + %D%/$(DEMANGLER_NAME).1
> +
> +info_TEXINFOS = %D%/binutils.texi
> +binutils_TEXI = $(srcdir)/%D%/binutils.texi
> +
> +AM_MAKEINFOFLAGS = -I "$(srcdir)/%D%" -I "$(top_srcdir)/../libiberty" \
> + -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc \
> --no-split
> -TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
> - -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
> +TEXI2DVI = texi2dvi -I "$(srcdir)/%D%" -I "$(top_srcdir)/../libiberty" \
> + -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
>
> # Man page generation from texinfo
> -addr2line.1: $(binutils_TEXI)
> +%D%/addr2line.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
> $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f addr2line.pod
>
> -ar.1: $(binutils_TEXI)
> +%D%/ar.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
> $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f ar.pod
>
> -dlltool.1: $(binutils_TEXI)
> +%D%/dlltool.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
> $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f dlltool.pod
>
> -nm.1: $(binutils_TEXI)
> +%D%/nm.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
> $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f nm.pod
>
> -objcopy.1: $(binutils_TEXI)
> +%D%/objcopy.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
> $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f objcopy.pod
>
> -objdump.1: $(binutils_TEXI)
> +%D%/objdump.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
> $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f objdump.pod
>
> -ranlib.1: $(binutils_TEXI)
> +%D%/ranlib.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
> $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f ranlib.pod
>
> -readelf.1: $(binutils_TEXI)
> +%D%/readelf.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
> $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f readelf.pod
>
> -size.1: $(binutils_TEXI)
> +%D%/size.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
> $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f size.pod
>
> -strings.1: $(binutils_TEXI)
> +%D%/strings.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
> $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f strings.pod
>
> -strip.1: $(binutils_TEXI)
> +%D%/strip.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
> $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f strip.pod
>
> -elfedit.1: $(binutils_TEXI)
> +%D%/elfedit.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
> $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f elfedit.pod
>
> -windres.1: $(binutils_TEXI)
> +%D%/windres.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
> $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f windres.pod
>
> -windmc.1: $(binutils_TEXI)
> +%D%/windmc.1: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
> $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f windmc.pod
>
> -cxxfilt.man: $(binutils_TEXI)
> +%D%/cxxfilt.man: $(binutils_TEXI)
> $(AM_V_GEN)touch $@
> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
> $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
> $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
>
> -MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
> +MAINTAINERCLEANFILES += $(man_MANS) %D%/binutils.info %D%/cxxfilt.man
>
> -$(DEMANGLER_NAME).1: cxxfilt.man Makefile
> - $(AM_V_GEN)if test -f cxxfilt.man; then \
> - man=cxxfilt.man; \
> +%D%/$(DEMANGLER_NAME).1: %D%/cxxfilt.man Makefile
> + $(AM_V_GEN)if test -f %D%/cxxfilt.man; then \
> + man=%D%/cxxfilt.man; \
> else \
> - man=$(srcdir)/cxxfilt.man; \
> + man=$(srcdir)/%D%/cxxfilt.man; \
> fi; \
> sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
> -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
> - > $(DEMANGLER_NAME).1
> + > %D%/$(DEMANGLER_NAME).1
>
> -html-local: binutils/index.html
> -binutils/index.html: binutils.texi $(binutils_TEXINFOS)
> +html-local: %D%/binutils/index.html
> +binutils/index.html: %D%/binutils.texi $(binutils_TEXINFOS)
> $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
> - --split=node -I$(srcdir) $(srcdir)/binutils.texi
> + --split=node -I$(srcdir) $(srcdir)/%D%/binutils.texi
>
> # Maintenance
>
> -# We need it for the taz target in ../../Makefile.in.
> +# We need it for the taz target in ../Makefile.in.
> info-local: $(MANS)
>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] binutils: merge doc subdir up a level
2021-11-30 10:17 ` Luis Machado
@ 2021-11-30 10:18 ` Luis Machado
2021-11-30 14:41 ` Jeff Law
2021-11-30 16:12 ` Jeff Law
2021-11-30 16:35 ` [PATCH] binutils: add missing doc/dirstamp deps Mike Frysinger
1 sibling, 2 replies; 12+ messages in thread
From: Luis Machado @ 2021-11-30 10:18 UTC (permalink / raw)
To: Mike Frysinger, binutils
Sorry, forgot to mention, it is a --enable-targets=all build. Though I
don't think that makes a difference.
On 11/30/21 7:17 AM, Luis Machado wrote:
> Hi Mike,
>
> It seems this patch is causing some semi-deterministic failures in
> parallel builds. Sometimes it fails, other times it doesn't.
>
> Here's the output of one that has failed:
>
> --
>
> GEN doc/addr2line.1
>
> [261/1955]
> GEN doc/dlltool.1
>
>
> GEN doc/nm.1
> touch: cannot touch 'doc/addr2line.1' GEN doc/objcopy.1
>
>
> : No such file or directory
>
> Makefile:2017: recipe for target 'doc/addr2line.1' failed
>
>
> make[3]: *** [doc/addr2line.1] Error 1
>
> make[3]: *** Waiting for unfinished jobs....
>
>
> touch: cannot touch 'doc/dlltool.1': No such file or directory
>
> GEN doc/objdump.1
>
>
> GEN doc/ranlib.1
>
>
> GEN doc/ar.1
>
>
> Makefile:2031: recipe for target 'doc/dlltool.1' failed
>
>
> make[3]: *** [doc/dlltool.1] Error 1
>
>
> touch: cannot touch 'doc/objcopy.1': No such file or directory
> touch: cannot touch 'doc/nm.1' GEN doc/strings.1
>
>
> Makefile:2045: recipe for target 'doc/objcopy.1' failed
> make[3]: *** [doc/objcopy.1] Error 1
>
>
> : No such file or directory
>
> GEN doc/readelf.1
> configure: updating cache ./config.cache
> touch: cannot touch 'doc/objdump.1': No such file or directory
> touch: cannot touch 'doc/ranlib.1': No such file or directory
> touch: cannot touch 'doc/readelf.1'touch: cannot touch 'doc/strings.1':
> No such file or directory
> : No such file or directory
> touch: cannot touch 'doc/ar.1': No such file or directory
> Makefile:2066: recipe for target 'doc/readelf.1' failed
> make[3]: *** [doc/readelf.1] Error 1
> GEN doc/size.1
> Makefile:2024: recipe for target 'doc/ar.1' failed
> make[3]: *** [doc/ar.1] Error 1
> Makefile:2038: recipe for target 'doc/nm.1' failed
> make[3]: *** [doc/nm.1] Error 1
> Makefile:2080: recipe for target 'doc/strings.1' failed
> make[3]: *** [doc/strings.1] Error 1
> GEN doc/strip.1
> Makefile:2052: recipe for target 'doc/objdump.1' failed
> make[3]: *** [doc/objdump.1] Error 1
> touch: cannot touch 'doc/strip.1': No such file or directory
> make[4]: Entering directory
> '/home/luis.machado/work/tcwg/builds/binutils-gdb-arm64-bionic/binutils'
> checking that generated files are newer than configure... done
> configure: creating ./config.status
> Makefile:2059: recipe for target 'doc/ranlib.1' failed
> make[3]: *** [doc/ranlib.1] Error 1
> Makefile:2087: recipe for target 'doc/strip.1' failed
> make[3]: *** [doc/strip.1] Error 1
> touch: cannot touch 'doc/size.1': No such file or directory
> Makefile:2073: recipe for target 'doc/size.1' failed
> make[3]: *** [doc/size.1] Error 1
>
> --
>
> It is a fresh build from a clean tree. Resuming the build makes it
> complete, so I suppose there is some race condition somewhere. My build
> is a -j160. A -j1 completes just fine.
>
> I'm on Ubuntu 20.04.
>
> On 11/26/21 1:16 AM, Mike Frysinger via Binutils wrote:
>> This avoids a recursive make into the doc subdir and speeds up the
>> build slightly. It also allows for more parallelism.
>> ---
>> binutils/Makefile.am | 8 +-
>> binutils/Makefile.in | 594 +++++++++++++-
>> binutils/configure.ac | 2 +-
>> binutils/doc/Makefile.in | 1045 ------------------------
>> binutils/doc/{Makefile.am => local.mk} | 102 ++-
>> 5 files changed, 608 insertions(+), 1143 deletions(-)
>> delete mode 100644 binutils/doc/Makefile.in
>> rename binutils/doc/{Makefile.am => local.mk} (77%)
>>
>> diff --git a/binutils/Makefile.am b/binutils/Makefile.am
>> index 9ceb63da7b80..f54dadd921dc 100644
>> --- a/binutils/Makefile.am
>> +++ b/binutils/Makefile.am
>> @@ -17,13 +17,15 @@
>> # <http://www.gnu.org/licenses/>.
>> #
>> -AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
>> +AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
>> info-in-builddir no-texinfo.tex
>> ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
>> -SUBDIRS = doc po
>> +SUBDIRS = po
>> tooldir = $(exec_prefix)/$(target_alias)
>> +MAINTAINERCLEANFILES =
>> +
>> ## These aren't set by automake, because they appear in
>> ## bfd/acinclude.m4, which is included by binutils/acinclude.m4, and
>> ## thus is not seen by automake.
>> @@ -552,3 +554,5 @@ install-exec-local: install-binPROGRAMS
>> $(bin_PROGRAMS) $(noinst_PROGRAMS)
>> else true; \
>> fi; \
>> done
>> +
>> +include doc/local.mk
>> diff --git a/binutils/Makefile.in b/binutils/Makefile.in
>> index 1986261f9e33..336644a3983a 100644
>> --- a/binutils/Makefile.in
>> +++ b/binutils/Makefile.in
>> @@ -32,6 +32,24 @@
>> # <http://www.gnu.org/licenses/>.
>> #
>> +#
>> +# Copyright (C) 2012-2021 Free Software Foundation, Inc.
>> +#
>> +# This file is free software; you can redistribute it and/or modify
>> +# it under the terms of the GNU General Public License as published by
>> +# the Free Software Foundation; either version 3 of the License, or
>> +# (at your option) any later version.
>> +#
>> +# This program is distributed in the hope that it will be useful,
>> +# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> +# GNU General Public License for more details.
>> +#
>> +# You should have received a copy of the GNU General Public License
>> +# along with this program; see the file COPYING3. If not see
>> +# <http://www.gnu.org/licenses/>.
>> +#
>> +
>> VPATH = @srcdir@
>> am__is_gnu_make = { \
>> @@ -167,7 +185,8 @@ am__EXEEXT_10 = objcopy$(EXEEXT)
>> am__EXEEXT_11 = addr2line$(EXEEXT)
>> am__EXEEXT_12 = readelf$(EXEEXT)
>> am__EXEEXT_13 = elfedit$(EXEEXT)
>> -am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"
>> +am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)" \
>> + "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
>> am__EXEEXT_14 = nm-new$(EXEEXT)
>> am__EXEEXT_15 = strip-new$(EXEEXT)
>> am__EXEEXT_16 = cxxfilt$(EXEEXT)
>> @@ -356,6 +375,45 @@ SOURCES = $(addr2line_SOURCES) $(ar_SOURCES)
>> $(EXTRA_ar_SOURCES) \
>> $(size_SOURCES) $(srconv_SOURCES) $(strings_SOURCES) \
>> $(strip_new_SOURCES) $(sysdump_SOURCES) \
>> testsuite/gentestdlls.c $(windmc_SOURCES) $(windres_SOURCES)
>> +AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
>> +am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
>> +am__v_DVIPS_0 = @echo " DVIPS " $@;
>> +am__v_DVIPS_1 =
>> +AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
>> +am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
>> +am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
>> +am__v_MAKEINFO_1 =
>> +AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
>> +am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
>> +am__v_INFOHTML_0 = @echo " INFOHTML" $@;
>> +am__v_INFOHTML_1 =
>> +AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
>> +am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
>> +am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
>> +am__v_TEXI2DVI_1 =
>> +AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
>> +am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
>> +am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
>> +am__v_TEXI2PDF_1 =
>> +AM_V_texinfo = $(am__v_texinfo_@AM_V@)
>> +am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
>> +am__v_texinfo_0 = -q
>> +am__v_texinfo_1 =
>> +AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
>> +am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
>> +am__v_texidevnull_0 = > /dev/null
>> +am__v_texidevnull_1 =
>> +INFO_DEPS = doc/binutils.info
>> +am__TEXINFO_TEX_DIR = $(srcdir)
>> +DVIS = doc/binutils.dvi
>> +PDFS = doc/binutils.pdf
>> +PSS = doc/binutils.ps
>> +HTMLS = doc/binutils.html
>> +TEXINFOS = doc/binutils.texi
>> +TEXI2PDF = $(TEXI2DVI) --pdf --batch
>> +MAKEINFOHTML = $(MAKEINFO) --html
>> +AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
>> +DVIPS = dvips
>> RECURSIVE_TARGETS = all-recursive check-recursive
>> cscopelist-recursive \
>> ctags-recursive dvi-recursive html-recursive info-recursive \
>> install-data-recursive install-dvi-recursive \
>> @@ -369,6 +427,9 @@ am__can_run_installinfo = \
>> n|no|NO) false;; \
>> *) (install-info --version) >/dev/null 2>&1;; \
>> esac
>> +man1dir = $(mandir)/man1
>> +NROFF = nroff
>> +MANS = $(man_MANS)
>> RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
>> distclean-recursive maintainer-clean-recursive
>> am__recursive_targets = \
>> @@ -569,10 +630,11 @@ top_builddir = @top_builddir@
>> top_srcdir = @top_srcdir@
>> zlibdir = @zlibdir@
>> zlibinc = @zlibinc@
>> -AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
>> +AUTOMAKE_OPTIONS = dejagnu no-dist foreign subdir-objects
>> info-in-builddir no-texinfo.tex
>> ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
>> -SUBDIRS = doc po
>> +SUBDIRS = po
>> tooldir = $(exec_prefix)/$(target_alias)
>> +MAINTAINERCLEANFILES = $(man_MANS) doc/binutils.info doc/cxxfilt.man
>> # Automake 1.10+ disables lex and yacc output file regeneration if
>> # maintainer mode is disabled. Avoid this.
>> @@ -771,14 +833,52 @@ DISTCLEANFILES = sysroff.c sysroff.h site.exp
>> development.exp \
>> MOSTLYCLEANFILES = sysinfo$(EXEEXT_FOR_BUILD)
>> bin2c$(EXEEXT_FOR_BUILD) \
>> binutils.log binutils.sum abcdefgh*
>> +
>> +# What version of the manual you want; "all" includes everything
>> +CONFIG = all
>> +
>> +# Options to extract the man page from as.texinfo
>> +MANCONF = -Dman
>> +TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
>> +POD2MAN = pod2man --center="GNU Development Tools" \
>> + --release="binutils-$(VERSION)" --section=1
>> +
>> +
>> +# List of man pages generated from binutils.texi
>> +man_MANS = \
>> + doc/addr2line.1 \
>> + doc/ar.1 \
>> + doc/dlltool.1 \
>> + doc/nm.1 \
>> + doc/objcopy.1 \
>> + doc/objdump.1 \
>> + doc/ranlib.1 \
>> + doc/readelf.1 \
>> + doc/size.1 \
>> + doc/strings.1 \
>> + doc/strip.1 \
>> + doc/elfedit.1 \
>> + doc/windres.1 \
>> + doc/windmc.1 \
>> + doc/$(DEMANGLER_NAME).1
>> +
>> +info_TEXINFOS = doc/binutils.texi
>> +binutils_TEXI = $(srcdir)/doc/binutils.texi
>> +AM_MAKEINFOFLAGS = -I "$(srcdir)/doc" -I "$(top_srcdir)/../libiberty" \
>> + -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc \
>> + --no-split
>> +
>> +TEXI2DVI = texi2dvi -I "$(srcdir)/doc" -I "$(top_srcdir)/../libiberty" \
>> + -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
>> +
>> all: $(BUILT_SOURCES) config.h
>> $(MAKE) $(AM_MAKEFLAGS) all-recursive
>> .SUFFIXES:
>> -.SUFFIXES: .c .l .lo .o .obj .y
>> +.SUFFIXES: .c .dvi .l .lo .o .obj .ps .y
>> am--refresh: Makefile
>> @:
>> -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am
>> $(am__configure_deps)
>> +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am
>> $(srcdir)/doc/local.mk $(am__configure_deps)
>> @for dep in $?; do \
>> case '$(am__configure_deps)' in \
>> *$$dep*) \
>> @@ -800,6 +900,7 @@ Makefile: $(srcdir)/Makefile.in
>> $(top_builddir)/config.status
>> echo ' cd $(top_builddir) && $(SHELL) ./config.status $@
>> $(am__depfiles_maybe)'; \
>> cd $(top_builddir) && $(SHELL) ./config.status $@
>> $(am__depfiles_maybe);; \
>> esac;
>> +$(srcdir)/doc/local.mk $(am__empty):
>> $(top_builddir)/config.status: $(top_srcdir)/configure
>> $(CONFIG_STATUS_DEPENDENCIES)
>> $(SHELL) ./config.status --recheck
>> @@ -1139,6 +1240,186 @@ clean-libtool:
>> distclean-libtool:
>> -rm -f libtool config.lt
>> +doc/$(am__dirstamp):
>> + @$(MKDIR_P) doc
>> + @: > doc/$(am__dirstamp)
>> +
>> +doc/binutils.info: doc/binutils.texi
>> + @test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS)
>> doc/$(am__dirstamp)
>> + $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$"
>> && \
>> + rm -rf $$backupdir && mkdir $$backupdir && \
>> + if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
>> + for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9]
>> $(@:.info=).i[0-9][0-9]; do \
>> + if test -f $$f; then mv $$f $$backupdir; restore=mv; else :;
>> fi; \
>> + done; \
>> + else :; fi && \
>> + if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I
>> $(srcdir)/doc \
>> + -o $@ `test -f 'doc/binutils.texi' || echo
>> '$(srcdir)/'`doc/binutils.texi; \
>> + then \
>> + rc=0; \
>> + else \
>> + rc=$$?; \
>> + $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
>> + fi; \
>> + rm -rf $$backupdir; exit $$rc
>> +
>> +doc/binutils.dvi: doc/binutils.texi doc/$(am__dirstamp)
>> +
>> $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS"
>> \
>> + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc
>> -I $(srcdir)/doc' \
>> + $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@
>> $(AM_V_texidevnull) \
>> + `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi
>> +
>> +doc/binutils.pdf: doc/binutils.texi doc/$(am__dirstamp)
>> +
>> $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS"
>> \
>> + MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc
>> -I $(srcdir)/doc' \
>> + $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@
>> $(AM_V_texidevnull) \
>> + `test -f 'doc/binutils.texi' || echo '$(srcdir)/'`doc/binutils.texi
>> +
>> +doc/binutils.html: doc/binutils.texi doc/$(am__dirstamp)
>> + $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
>> + $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS)
>> $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
>> + -o $(@:.html=.htp) `test -f 'doc/binutils.texi' || echo
>> '$(srcdir)/'`doc/binutils.texi; \
>> + then \
>> + rm -rf $@ && mv $(@:.html=.htp) $@; \
>> + else \
>> + rm -rf $(@:.html=.htp); exit 1; \
>> + fi
>> +.dvi.ps:
>> +
>> $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS"
>> \
>> + $(DVIPS) $(AM_V_texinfo) -o $@ $<
>> +
>> +uninstall-dvi-am:
>> + @$(NORMAL_UNINSTALL)
>> + @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
>> + for p in $$list; do \
>> + $(am__strip_dir) \
>> + echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
>> + rm -f "$(DESTDIR)$(dvidir)/$$f"; \
>> + done
>> +
>> +uninstall-html-am:
>> + @$(NORMAL_UNINSTALL)
>> + @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
>> + for p in $$list; do \
>> + $(am__strip_dir) \
>> + echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
>> + rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
>> + done
>> +
>> +uninstall-info-am:
>> + @$(PRE_UNINSTALL)
>> + @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo);
>> then \
>> + list='$(INFO_DEPS)'; \
>> + for file in $$list; do \
>> + relfile=`echo "$$file" | sed 's|^.*/||'`; \
>> + echo " install-info --info-dir='$(DESTDIR)$(infodir)'
>> --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
>> + if install-info --info-dir="$(DESTDIR)$(infodir)" --remove
>> "$(DESTDIR)$(infodir)/$$relfile"; \
>> + then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" ||
>> exit 1; fi; \
>> + done; \
>> + else :; fi
>> + @$(NORMAL_UNINSTALL)
>> + @list='$(INFO_DEPS)'; \
>> + for file in $$list; do \
>> + relfile=`echo "$$file" | sed 's|^.*/||'`; \
>> + relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
>> + (if test -d "$(DESTDIR)$(infodir)" && cd
>> "$(DESTDIR)$(infodir)"; then \
>> + echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile
>> $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9]
>> $$relfile_i[0-9][0-9]"; \
>> + rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9]
>> $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
>> + else :; fi); \
>> + done
>> +
>> +uninstall-pdf-am:
>> + @$(NORMAL_UNINSTALL)
>> + @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
>> + for p in $$list; do \
>> + $(am__strip_dir) \
>> + echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
>> + rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
>> + done
>> +
>> +uninstall-ps-am:
>> + @$(NORMAL_UNINSTALL)
>> + @list='$(PSS)'; test -n "$(psdir)" || list=; \
>> + for p in $$list; do \
>> + $(am__strip_dir) \
>> + echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
>> + rm -f "$(DESTDIR)$(psdir)/$$f"; \
>> + done
>> +
>> +dist-info: $(INFO_DEPS)
>> + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
>> + list='$(INFO_DEPS)'; \
>> + for base in $$list; do \
>> + case $$base in \
>> + $(srcdir)/*) base=`echo "$$base" | sed
>> "s|^$$srcdirstrip/||"`;; \
>> + esac; \
>> + if test -f $$base; then d=.; else d=$(srcdir); fi; \
>> + base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
>> + for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9]
>> $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
>> + if test -f $$file; then \
>> + relfile=`expr "$$file" : "$$d/\(.*\)"`; \
>> + test -f "$(distdir)/$$relfile" || \
>> + cp -p $$file "$(distdir)/$$relfile"; \
>> + else :; fi; \
>> + done; \
>> + done
>> +
>> +mostlyclean-aminfo:
>> + -rm -rf doc/binutils.t2d doc/binutils.t2p
>> +
>> +clean-aminfo:
>> + -test -z "doc/binutils.dvi doc/binutils.pdf doc/binutils.ps
>> doc/binutils.html" \
>> + || rm -rf doc/binutils.dvi doc/binutils.pdf doc/binutils.ps
>> doc/binutils.html
>> +
>> +maintainer-clean-aminfo:
>> + @list='$(INFO_DEPS)'; for i in $$list; do \
>> + i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
>> + echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9]
>> $$i_i[0-9][0-9]"; \
>> + rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
>> + done
>> +install-man1: $(man_MANS)
>> + @$(NORMAL_INSTALL)
>> + @list1=''; \
>> + list2='$(man_MANS)'; \
>> + test -n "$(man1dir)" \
>> + && test -n "`echo $$list1$$list2`" \
>> + || exit 0; \
>> + echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
>> + $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
>> + { for i in $$list1; do echo "$$i"; done; \
>> + if test -n "$$list2"; then \
>> + for i in $$list2; do echo "$$i"; done \
>> + | sed -n '/\.1[a-z]*$$/p'; \
>> + fi; \
>> + } | while read p; do \
>> + if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
>> + echo "$$d$$p"; echo "$$p"; \
>> + done | \
>> + sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
>> + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
>> + sed 'N;N;s,\n, ,g' | { \
>> + list=; while read file base inst; do \
>> + if test "$$base" = "$$inst"; then list="$$list $$file"; else \
>> + echo " $(INSTALL_DATA) '$$file'
>> '$(DESTDIR)$(man1dir)/$$inst'"; \
>> + $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" ||
>> exit $$?; \
>> + fi; \
>> + done; \
>> + for i in $$list; do echo "$$i"; done | $(am__base_list) | \
>> + while read files; do \
>> + test -z "$$files" || { \
>> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
>> + $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
>> + done; }
>> +
>> +uninstall-man1:
>> + @$(NORMAL_UNINSTALL)
>> + @list=''; test -n "$(man1dir)" || exit 0; \
>> + files=`{ for i in $$list; do echo "$$i"; done; \
>> + l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
>> + sed -n '/\.1[a-z]*$$/p'; \
>> + } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
>> + -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
>> + dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
>> # This directory's subdirectories are mostly independent; you can cd
>> # into them and run 'make' without going through this Makefile.
>> @@ -1281,10 +1562,10 @@ check-am: all-am
>> $(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
>> check: $(BUILT_SOURCES)
>> $(MAKE) $(AM_MAKEFLAGS) check-recursive
>> -all-am: Makefile $(PROGRAMS) $(SCRIPTS) config.h
>> +all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(SCRIPTS) $(MANS) config.h
>> installdirs: installdirs-recursive
>> installdirs-am:
>> - for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"; do \
>> + for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(bindir)"
>> "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
>> test -z "$$dir" || $(MKDIR_P) "$$dir"; \
>> done
>> install: $(BUILT_SOURCES)
>> @@ -1315,6 +1596,7 @@ clean-generic:
>> distclean-generic:
>> -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
>> -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)"
>> || rm -f $(CONFIG_CLEAN_VPATH_FILES)
>> + -rm -f doc/$(am__dirstamp)
>> -rm -f testsuite/$(DEPDIR)/$(am__dirstamp)
>> -rm -f testsuite/$(am__dirstamp)
>> -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
>> @@ -1333,9 +1615,10 @@ maintainer-clean-generic:
>> -rm -f rcparse.c
>> -rm -f rcparse.h
>> -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
>> + -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
>> clean: clean-recursive
>> -clean-am: clean-binPROGRAMS clean-generic clean-libtool \
>> +clean-am: clean-aminfo clean-binPROGRAMS clean-generic clean-libtool \
>> clean-noinstPROGRAMS mostlyclean-am
>> distclean: distclean-recursive
>> @@ -1348,43 +1631,134 @@ distclean-am: clean-am distclean-DEJAGNU
>> distclean-compile \
>> dvi: dvi-recursive
>> -dvi-am:
>> +dvi-am: $(DVIS)
>> html: html-recursive
>> -html-am:
>> +html-am: $(HTMLS) html-local
>> info: info-recursive
>> -info-am:
>> +info-am: $(INFO_DEPS) info-local
>> -install-data-am:
>> +install-data-am: install-info-am install-man
>> install-dvi: install-dvi-recursive
>> -install-dvi-am:
>> -
>> +install-dvi-am: $(DVIS)
>> + @$(NORMAL_INSTALL)
>> + @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
>> + if test -n "$$list"; then \
>> + echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
>> + $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
>> + fi; \
>> + for p in $$list; do \
>> + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
>> + echo "$$d$$p"; \
>> + done | $(am__base_list) | \
>> + while read files; do \
>> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
>> + $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
>> + done
>> install-exec-am: install-binPROGRAMS install-binSCRIPTS \
>> install-exec-local
>> install-html: install-html-recursive
>> -install-html-am:
>> -
>> +install-html-am: $(HTMLS)
>> + @$(NORMAL_INSTALL)
>> + @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
>> + if test -n "$$list"; then \
>> + echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
>> + $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
>> + fi; \
>> + for p in $$list; do \
>> + if test -f "$$p" || test -d "$$p"; then d=; else
>> d="$(srcdir)/"; fi; \
>> + $(am__strip_dir) \
>> + d2=$$d$$p; \
>> + if test -d "$$d2"; then \
>> + echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
>> + $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
>> + echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
>> + $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit
>> $$?; \
>> + else \
>> + list2="$$list2 $$d2"; \
>> + fi; \
>> + done; \
>> + test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
>> + while read files; do \
>> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
>> + $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
>> + done; }
>> install-info: install-info-recursive
>> -install-info-am:
>> -
>> -install-man:
>> +install-info-am: $(INFO_DEPS)
>> + @$(NORMAL_INSTALL)
>> + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
>> + list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
>> + if test -n "$$list"; then \
>> + echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
>> + $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
>> + fi; \
>> + for file in $$list; do \
>> + case $$file in \
>> + $(srcdir)/*) file=`echo "$$file" | sed
>> "s|^$$srcdirstrip/||"`;; \
>> + esac; \
>> + if test -f $$file; then d=.; else d=$(srcdir); fi; \
>> + file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
>> + for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
>> + $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
>> + if test -f $$ifile; then \
>> + echo "$$ifile"; \
>> + else : ; fi; \
>> + done; \
>> + done | $(am__base_list) | \
>> + while read files; do \
>> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
>> + $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
>> + @$(POST_INSTALL)
>> + @if $(am__can_run_installinfo); then \
>> + list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
>> + for file in $$list; do \
>> + relfile=`echo "$$file" | sed 's|^.*/||'`; \
>> + echo " install-info --info-dir='$(DESTDIR)$(infodir)'
>> '$(DESTDIR)$(infodir)/$$relfile'";\
>> + install-info --info-dir="$(DESTDIR)$(infodir)"
>> "$(DESTDIR)$(infodir)/$$relfile" || :;\
>> + done; \
>> + else : ; fi
>> +install-man: install-man1
>> install-pdf: install-pdf-recursive
>> -install-pdf-am:
>> -
>> +install-pdf-am: $(PDFS)
>> + @$(NORMAL_INSTALL)
>> + @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
>> + if test -n "$$list"; then \
>> + echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
>> + $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
>> + fi; \
>> + for p in $$list; do \
>> + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
>> + echo "$$d$$p"; \
>> + done | $(am__base_list) | \
>> + while read files; do \
>> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
>> + $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
>> install-ps: install-ps-recursive
>> -install-ps-am:
>> -
>> +install-ps-am: $(PSS)
>> + @$(NORMAL_INSTALL)
>> + @list='$(PSS)'; test -n "$(psdir)" || list=; \
>> + if test -n "$$list"; then \
>> + echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
>> + $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
>> + fi; \
>> + for p in $$list; do \
>> + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
>> + echo "$$d$$p"; \
>> + done | $(am__base_list) | \
>> + while read files; do \
>> + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
>> + $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
>> installcheck-am: installcheck-local
>> maintainer-clean: maintainer-clean-recursive
>> @@ -1392,44 +1766,52 @@ maintainer-clean: maintainer-clean-recursive
>> -rm -rf $(top_srcdir)/autom4te.cache
>> -rm -rf ./$(DEPDIR) testsuite/$(DEPDIR)
>> -rm -f Makefile
>> -maintainer-clean-am: distclean-am maintainer-clean-generic
>> +maintainer-clean-am: distclean-am maintainer-clean-aminfo \
>> + maintainer-clean-generic
>> mostlyclean: mostlyclean-recursive
>> -mostlyclean-am: mostlyclean-compile mostlyclean-generic \
>> - mostlyclean-libtool mostlyclean-local
>> +mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
>> + mostlyclean-generic mostlyclean-libtool mostlyclean-local
>> pdf: pdf-recursive
>> -pdf-am:
>> +pdf-am: $(PDFS)
>> ps: ps-recursive
>> -ps-am:
>> +ps-am: $(PSS)
>> +
>> +uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \
>> + uninstall-dvi-am uninstall-html-am uninstall-info-am \
>> + uninstall-man uninstall-pdf-am uninstall-ps-am
>> -uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS
>> +uninstall-man: uninstall-man1
>> .MAKE: $(am__recursive_targets) all check check-am install install-am \
>> install-strip
>> .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
>> - am--refresh check check-DEJAGNU check-am clean \
>> + am--refresh check check-DEJAGNU check-am clean clean-aminfo \
>> clean-binPROGRAMS clean-cscope clean-generic clean-libtool \
>> clean-noinstPROGRAMS cscope cscopelist-am ctags ctags-am \
>> - distclean distclean-DEJAGNU distclean-compile \
>> + dist-info distclean distclean-DEJAGNU distclean-compile \
>> distclean-generic distclean-hdr distclean-libtool \
>> - distclean-tags dvi dvi-am html html-am info info-am install \
>> - install-am install-binPROGRAMS install-binSCRIPTS install-data \
>> - install-data-am install-dvi install-dvi-am install-exec \
>> - install-exec-am install-exec-local install-html \
>> - install-html-am install-info install-info-am install-man \
>> - install-pdf install-pdf-am install-ps install-ps-am \
>> - install-strip installcheck installcheck-am installcheck-local \
>> - installdirs installdirs-am maintainer-clean \
>> - maintainer-clean-generic mostlyclean mostlyclean-compile \
>> - mostlyclean-generic mostlyclean-libtool mostlyclean-local pdf \
>> - pdf-am ps ps-am tags tags-am uninstall uninstall-am \
>> - uninstall-binPROGRAMS uninstall-binSCRIPTS
>> + distclean-tags dvi dvi-am html html-am html-local info info-am \
>> + info-local install install-am install-binPROGRAMS \
>> + install-binSCRIPTS install-data install-data-am install-dvi \
>> + install-dvi-am install-exec install-exec-am install-exec-local \
>> + install-html install-html-am install-info install-info-am \
>> + install-man install-man1 install-pdf install-pdf-am install-ps \
>> + install-ps-am install-strip installcheck installcheck-am \
>> + installcheck-local installdirs installdirs-am maintainer-clean \
>> + maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
>> + mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
>> + mostlyclean-libtool mostlyclean-local pdf pdf-am ps ps-am tags \
>> + tags-am uninstall uninstall-am uninstall-binPROGRAMS \
>> + uninstall-binSCRIPTS uninstall-dvi-am uninstall-html-am \
>> + uninstall-info-am uninstall-man uninstall-man1 \
>> + uninstall-pdf-am uninstall-ps-am
>> .PRECIOUS: Makefile
>> @@ -1630,6 +2012,132 @@ install-exec-local: install-binPROGRAMS
>> $(bin_PROGRAMS) $(noinst_PROGRAMS)
>> fi; \
>> done
>> +# Man page generation from texinfo
>> +doc/addr2line.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI)
>> > addr2line.pod
>> + $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f addr2line.pod
>> +
>> +doc/ar.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
>> + $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$
>> && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f ar.pod
>> +
>> +doc/dlltool.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) >
>> dlltool.pod
>> + $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f dlltool.pod
>> +
>> +doc/nm.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
>> + $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$
>> && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f nm.pod
>> +
>> +doc/objcopy.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) >
>> objcopy.pod
>> + $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f objcopy.pod
>> +
>> +doc/objdump.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) >
>> objdump.pod
>> + $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f objdump.pod
>> +
>> +doc/ranlib.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) >
>> ranlib.pod
>> + $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f ranlib.pod
>> +
>> +doc/readelf.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) >
>> readelf.pod
>> + $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f readelf.pod
>> +
>> +doc/size.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) >
>> size.pod
>> + $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f size.pod
>> +
>> +doc/strings.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) >
>> strings.pod
>> + $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f strings.pod
>> +
>> +doc/strip.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) >
>> strip.pod
>> + $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f strip.pod
>> +
>> +doc/elfedit.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) >
>> elfedit.pod
>> + $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f elfedit.pod
>> +
>> +doc/windres.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) >
>> windres.pod
>> + $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f windres.pod
>> +
>> +doc/windmc.1: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) >
>> windmc.pod
>> + $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f windmc.pod
>> +
>> +doc/cxxfilt.man: $(binutils_TEXI)
>> + $(AM_V_GEN)touch $@
>> + $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) >
>> $(DEMANGLER_NAME).pod
>> + $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n
>> .na/d' > $@.T$$$$ && \
>> + mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> + $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
>> +
>> +doc/$(DEMANGLER_NAME).1: doc/cxxfilt.man Makefile
>> + $(AM_V_GEN)if test -f doc/cxxfilt.man; then \
>> + man=doc/cxxfilt.man; \
>> + else \
>> + man=$(srcdir)/doc/cxxfilt.man; \
>> + fi; \
>> + sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
>> + -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
>> + > doc/$(DEMANGLER_NAME).1
>> +
>> +html-local: doc/binutils/index.html
>> +binutils/index.html: doc/binutils.texi $(binutils_TEXINFOS)
>> + $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS)
>> $(MAKEINFOFLAGS) \
>> + --split=node -I$(srcdir) $(srcdir)/doc/binutils.texi
>> +
>> +# Maintenance
>> +
>> +# We need it for the taz target in ../Makefile.in.
>> +info-local: $(MANS)
>> +
>> # Tell versions [3.59,3.63) of GNU make to not export all variables.
>> # Otherwise a system limit (for SysV at least) may be exceeded.
>> .NOEXPORT:
>> diff --git a/binutils/configure.ac b/binutils/configure.ac
>> index b0677ba5f20e..62696ff2a225 100644
>> --- a/binutils/configure.ac
>> +++ b/binutils/configure.ac
>> @@ -535,7 +535,7 @@ AC_SUBST(docdir)
>> AC_SUBST(htmldir)
>> AC_SUBST(pdfdir)
>> -AC_CONFIG_FILES(Makefile doc/Makefile po/Makefile.in:po/Make-in)
>> +AC_CONFIG_FILES(Makefile po/Makefile.in:po/Make-in)
>> AC_OUTPUT
>> GNU_MAKE_JOBSERVER
>> diff --git a/binutils/doc/Makefile.in b/binutils/doc/Makefile.in
>> deleted file mode 100644
>> index d42cdd87929b..000000000000
>> --- a/binutils/doc/Makefile.in
>> +++ /dev/null
>> @@ -1,1045 +0,0 @@
>> -# Makefile.in generated by automake 1.15.1 from Makefile.am.
>> -# @configure_input@
>> -
>> -# Copyright (C) 1994-2017 Free Software Foundation, Inc.
>> -
>> -# This Makefile.in is free software; the Free Software Foundation
>> -# gives unlimited permission to copy and/or distribute it,
>> -# with or without modifications, as long as this notice is preserved.
>> -
>> -# This program is distributed in the hope that it will be useful,
>> -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
>> -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
>> -# PARTICULAR PURPOSE.
>> -
>> -@SET_MAKE@
>> -
>> -#
>> -# Copyright (C) 2012-2021 Free Software Foundation, Inc.
>> -#
>> -# This file is free software; you can redistribute it and/or modify
>> -# it under the terms of the GNU General Public License as published by
>> -# the Free Software Foundation; either version 3 of the License, or
>> -# (at your option) any later version.
>> -#
>> -# This program is distributed in the hope that it will be useful,
>> -# but WITHOUT ANY WARRANTY; without even the implied warranty of
>> -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> -# GNU General Public License for more details.
>> -#
>> -# You should have received a copy of the GNU General Public License
>> -# along with this program; see the file COPYING3. If not see
>> -# <http://www.gnu.org/licenses/>.
>> -#
>> -VPATH = @srcdir@
>> -am__is_gnu_make = { \
>> - if test -z '$(MAKELEVEL)'; then \
>> - false; \
>> - elif test -n '$(MAKE_HOST)'; then \
>> - true; \
>> - elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
>> - true; \
>> - else \
>> - false; \
>> - fi; \
>> -}
>> -am__make_running_with_option = \
>> - case $${target_option-} in \
>> - ?) ;; \
>> - *) echo "am__make_running_with_option: internal error: invalid" \
>> - "target option '$${target_option-}' specified" >&2; \
>> - exit 1;; \
>> - esac; \
>> - has_opt=no; \
>> - sane_makeflags=$$MAKEFLAGS; \
>> - if $(am__is_gnu_make); then \
>> - sane_makeflags=$$MFLAGS; \
>> - else \
>> - case $$MAKEFLAGS in \
>> - *\\[\ \ ]*) \
>> - bs=\\; \
>> - sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
>> - | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
>> - esac; \
>> - fi; \
>> - skip_next=no; \
>> - strip_trailopt () \
>> - { \
>> - flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
>> - }; \
>> - for flg in $$sane_makeflags; do \
>> - test $$skip_next = yes && { skip_next=no; continue; }; \
>> - case $$flg in \
>> - *=*|--*) continue;; \
>> - -*I) strip_trailopt 'I'; skip_next=yes;; \
>> - -*I?*) strip_trailopt 'I';; \
>> - -*O) strip_trailopt 'O'; skip_next=yes;; \
>> - -*O?*) strip_trailopt 'O';; \
>> - -*l) strip_trailopt 'l'; skip_next=yes;; \
>> - -*l?*) strip_trailopt 'l';; \
>> - -[dEDm]) skip_next=yes;; \
>> - -[JT]) skip_next=yes;; \
>> - esac; \
>> - case $$flg in \
>> - *$$target_option*) has_opt=yes; break;; \
>> - esac; \
>> - done; \
>> - test $$has_opt = yes
>> -am__make_dryrun = (target_option=n; $(am__make_running_with_option))
>> -am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
>> -pkgdatadir = $(datadir)/@PACKAGE@
>> -pkgincludedir = $(includedir)/@PACKAGE@
>> -pkglibdir = $(libdir)/@PACKAGE@
>> -pkglibexecdir = $(libexecdir)/@PACKAGE@
>> -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
>> -install_sh_DATA = $(install_sh) -c -m 644
>> -install_sh_PROGRAM = $(install_sh) -c
>> -install_sh_SCRIPT = $(install_sh) -c
>> -INSTALL_HEADER = $(INSTALL_DATA)
>> -transform = $(program_transform_name)
>> -NORMAL_INSTALL = :
>> -PRE_INSTALL = :
>> -POST_INSTALL = :
>> -NORMAL_UNINSTALL = :
>> -PRE_UNINSTALL = :
>> -POST_UNINSTALL = :
>> -build_triplet = @build@
>> -host_triplet = @host@
>> -target_triplet = @target@
>> -subdir = doc
>> -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
>> -am__aclocal_m4_deps = $(top_srcdir)/../bfd/acinclude.m4 \
>> - $(top_srcdir)/../bfd/warning.m4 \
>> - $(top_srcdir)/../config/depstand.m4 \
>> - $(top_srcdir)/../config/enable.m4 \
>> - $(top_srcdir)/../config/gettext-sister.m4 \
>> - $(top_srcdir)/../config/iconv.m4 \
>> - $(top_srcdir)/../config/jobserver.m4 \
>> - $(top_srcdir)/../config/largefile.m4 \
>> - $(top_srcdir)/../config/lcmessage.m4 \
>> - $(top_srcdir)/../config/lead-dot.m4 \
>> - $(top_srcdir)/../config/lib-ld.m4 \
>> - $(top_srcdir)/../config/lib-link.m4 \
>> - $(top_srcdir)/../config/lib-prefix.m4 \
>> - $(top_srcdir)/../config/nls.m4 \
>> - $(top_srcdir)/../config/override.m4 \
>> - $(top_srcdir)/../config/pkg.m4 \
>> - $(top_srcdir)/../config/plugins.m4 \
>> - $(top_srcdir)/../config/po.m4 \
>> - $(top_srcdir)/../config/progtest.m4 \
>> - $(top_srcdir)/../config/zlib.m4 $(top_srcdir)/../libtool.m4 \
>> - $(top_srcdir)/../ltoptions.m4 $(top_srcdir)/../ltsugar.m4 \
>> - $(top_srcdir)/../ltversion.m4 $(top_srcdir)/../lt~obsolete.m4 \
>> - $(top_srcdir)/../bfd/version.m4 \
>> - $(top_srcdir)/../config/debuginfod.m4 \
>> - $(top_srcdir)/configure.ac
>> -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
>> - $(ACLOCAL_M4)
>> -DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
>> -mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
>> -CONFIG_HEADER = $(top_builddir)/config.h
>> -CONFIG_CLEAN_FILES =
>> -CONFIG_CLEAN_VPATH_FILES =
>> -AM_V_P = $(am__v_P_@AM_V@)
>> -am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
>> -am__v_P_0 = false
>> -am__v_P_1 = :
>> -AM_V_GEN = $(am__v_GEN_@AM_V@)
>> -am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
>> -am__v_GEN_0 = @echo " GEN " $@;
>> -am__v_GEN_1 =
>> -AM_V_at = $(am__v_at_@AM_V@)
>> -am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
>> -am__v_at_0 = @
>> -am__v_at_1 =
>> -SOURCES =
>> -DIST_SOURCES =
>> -AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
>> -am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
>> -am__v_DVIPS_0 = @echo " DVIPS " $@;
>> -am__v_DVIPS_1 =
>> -AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
>> -am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
>> -am__v_MAKEINFO_0 = @echo " MAKEINFO" $@;
>> -am__v_MAKEINFO_1 =
>> -AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
>> -am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
>> -am__v_INFOHTML_0 = @echo " INFOHTML" $@;
>> -am__v_INFOHTML_1 =
>> -AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
>> -am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
>> -am__v_TEXI2DVI_0 = @echo " TEXI2DVI" $@;
>> -am__v_TEXI2DVI_1 =
>> -AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
>> -am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
>> -am__v_TEXI2PDF_0 = @echo " TEXI2PDF" $@;
>> -am__v_TEXI2PDF_1 =
>> -AM_V_texinfo = $(am__v_texinfo_@AM_V@)
>> -am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
>> -am__v_texinfo_0 = -q
>> -am__v_texinfo_1 =
>> -AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
>> -am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
>> -am__v_texidevnull_0 = > /dev/null
>> -am__v_texidevnull_1 =
>> -INFO_DEPS = binutils.info
>> -am__TEXINFO_TEX_DIR = $(srcdir)
>> -DVIS = binutils.dvi
>> -PDFS = binutils.pdf
>> -PSS = binutils.ps
>> -HTMLS = binutils.html
>> -TEXINFOS = binutils.texi
>> -TEXI2PDF = $(TEXI2DVI) --pdf --batch
>> -MAKEINFOHTML = $(MAKEINFO) --html
>> -AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
>> -DVIPS = dvips
>> -am__can_run_installinfo = \
>> - case $$AM_UPDATE_INFO_DIR in \
>> - n|no|NO) false;; \
>> - *) (install-info --version) >/dev/null 2>&1;; \
>> - esac
>> -am__installdirs = "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"
>> -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
>> -am__vpath_adj = case $$p in \
>> - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
>> - *) f=$$p;; \
>> - esac;
>> -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
>> -am__install_max = 40
>> -am__nobase_strip_setup = \
>> - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
>> -am__nobase_strip = \
>> - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
>> -am__nobase_list = $(am__nobase_strip_setup); \
>> - for p in $$list; do echo "$$p $$p"; done | \
>> - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\(
>> .*\)/[^/]*$$,\1,' | \
>> - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
>> - if (++n[$$2] == $(am__install_max)) \
>> - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
>> - END { for (dir in files) print dir, files[dir] }'
>> -am__base_list = \
>> - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
>> - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
>> -am__uninstall_files_from_dir = { \
>> - test -z "$$files" \
>> - || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir";
>> } \
>> - || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
>> - $(am__cd) "$$dir" && rm -f $$files; }; \
>> - }
>> -man1dir = $(mandir)/man1
>> -NROFF = nroff
>> -MANS = $(man_MANS)
>> -am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
>> -am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/../mkinstalldirs
>> -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
>> -ACLOCAL = @ACLOCAL@
>> -AMTAR = @AMTAR@
>> -AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
>> -AR = @AR@
>> -AUTOCONF = @AUTOCONF@
>> -AUTOHEADER = @AUTOHEADER@
>> -AUTOMAKE = @AUTOMAKE@
>> -AWK = @AWK@
>> -BUILD_DLLTOOL = @BUILD_DLLTOOL@
>> -BUILD_DLLWRAP = @BUILD_DLLWRAP@
>> -BUILD_INSTALL_MISC = @BUILD_INSTALL_MISC@
>> -BUILD_MISC = @BUILD_MISC@
>> -BUILD_SRCONV = @BUILD_SRCONV@
>> -BUILD_WINDMC = @BUILD_WINDMC@
>> -BUILD_WINDRES = @BUILD_WINDRES@
>> -CATALOGS = @CATALOGS@
>> -CATOBJEXT = @CATOBJEXT@
>> -CC = @CC@
>> -CCDEPMODE = @CCDEPMODE@
>> -CC_FOR_BUILD = @CC_FOR_BUILD@
>> -CFLAGS = @CFLAGS@
>> -CPP = @CPP@
>> -CPPFLAGS = @CPPFLAGS@
>> -CYGPATH_W = @CYGPATH_W@
>> -DATADIRNAME = @DATADIRNAME@
>> -DEBUGINFOD_CFLAGS = @DEBUGINFOD_CFLAGS@
>> -DEBUGINFOD_LIBS = @DEBUGINFOD_LIBS@
>> -DEFS = @DEFS@
>> -DEMANGLER_NAME = @DEMANGLER_NAME@
>> -DEPDIR = @DEPDIR@
>> -DLLTOOL_DEFS = @DLLTOOL_DEFS@
>> -DSYMUTIL = @DSYMUTIL@
>> -DUMPBIN = @DUMPBIN@
>> -ECHO_C = @ECHO_C@
>> -ECHO_N = @ECHO_N@
>> -ECHO_T = @ECHO_T@
>> -EGREP = @EGREP@
>> -EMULATION = @EMULATION@
>> -EMULATION_VECTOR = @EMULATION_VECTOR@
>> -EXEEXT = @EXEEXT@
>> -EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@
>> -FGREP = @FGREP@
>> -GENCAT = @GENCAT@
>> -GMSGFMT = @GMSGFMT@
>> -GREP = @GREP@
>> -HDEFINES = @HDEFINES@
>> -INCINTL = @INCINTL@
>> -INSTALL = @INSTALL@
>> -INSTALL_DATA = @INSTALL_DATA@
>> -INSTALL_PROGRAM = @INSTALL_PROGRAM@
>> -INSTALL_SCRIPT = @INSTALL_SCRIPT@
>> -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
>> -INSTOBJEXT = @INSTOBJEXT@
>> -LARGEFILE_CPPFLAGS = @LARGEFILE_CPPFLAGS@
>> -LD = @LD@
>> -LDFLAGS = @LDFLAGS@
>> -LEX = @LEX@
>> -LEXLIB = @LEXLIB@
>> -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
>> -LIBICONV = @LIBICONV@
>> -LIBINTL = @LIBINTL@
>> -LIBINTL_DEP = @LIBINTL_DEP@
>> -LIBOBJS = @LIBOBJS@
>> -LIBS = @LIBS@
>> -LIBTOOL = @LIBTOOL@
>> -LIPO = @LIPO@
>> -LN_S = @LN_S@
>> -LTLIBICONV = @LTLIBICONV@
>> -LTLIBOBJS = @LTLIBOBJS@
>> -MAINT = @MAINT@
>> -MAKEINFO = @MAKEINFO@
>> -MKDIR_P = @MKDIR_P@
>> -MKINSTALLDIRS = @MKINSTALLDIRS@
>> -MSGFMT = @MSGFMT@
>> -MSGMERGE = @MSGMERGE@
>> -NM = @NM@
>> -NMEDIT = @NMEDIT@
>> -NO_WERROR = @NO_WERROR@
>> -OBJDUMP = @OBJDUMP@
>> -OBJDUMP_DEFS = @OBJDUMP_DEFS@
>> -OBJDUMP_PRIVATE_OFILES = @OBJDUMP_PRIVATE_OFILES@
>> -OBJEXT = @OBJEXT@
>> -OTOOL = @OTOOL@
>> -OTOOL64 = @OTOOL64@
>> -PACKAGE = @PACKAGE@
>> -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
>> -PACKAGE_NAME = @PACKAGE_NAME@
>> -PACKAGE_STRING = @PACKAGE_STRING@
>> -PACKAGE_TARNAME = @PACKAGE_TARNAME@
>> -PACKAGE_URL = @PACKAGE_URL@
>> -PACKAGE_VERSION = @PACKAGE_VERSION@
>> -PATH_SEPARATOR = @PATH_SEPARATOR@
>> -PKG_CONFIG = @PKG_CONFIG@
>> -PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
>> -PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
>> -POSUB = @POSUB@
>> -RANLIB = @RANLIB@
>> -SED = @SED@
>> -SET_MAKE = @SET_MAKE@
>> -SHELL = @SHELL@
>> -STRIP = @STRIP@
>> -USE_NLS = @USE_NLS@
>> -VERSION = @VERSION@
>> -WARN_CFLAGS = @WARN_CFLAGS@
>> -WARN_CFLAGS_FOR_BUILD = @WARN_CFLAGS_FOR_BUILD@
>> -WARN_WRITE_STRINGS = @WARN_WRITE_STRINGS@
>> -XGETTEXT = @XGETTEXT@
>> -YACC = @YACC@
>> -YFLAGS = @YFLAGS@
>> -abs_builddir = @abs_builddir@
>> -abs_srcdir = @abs_srcdir@
>> -abs_top_builddir = @abs_top_builddir@
>> -abs_top_srcdir = @abs_top_srcdir@
>> -ac_ct_CC = @ac_ct_CC@
>> -ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
>> -am__include = @am__include@
>> -am__leading_dot = @am__leading_dot@
>> -am__quote = @am__quote@
>> -am__tar = @am__tar@
>> -am__untar = @am__untar@
>> -bindir = @bindir@
>> -build = @build@
>> -build_alias = @build_alias@
>> -build_cpu = @build_cpu@
>> -build_os = @build_os@
>> -build_vendor = @build_vendor@
>> -builddir = @builddir@
>> -datadir = @datadir@
>> -datarootdir = @datarootdir@
>> -docdir = @docdir@
>> -dvidir = @dvidir@
>> -exec_prefix = @exec_prefix@
>> -host = @host@
>> -host_alias = @host_alias@
>> -host_cpu = @host_cpu@
>> -host_os = @host_os@
>> -host_vendor = @host_vendor@
>> -htmldir = @htmldir@
>> -includedir = @includedir@
>> -infodir = @infodir@
>> -install_sh = @install_sh@
>> -libdir = @libdir@
>> -libexecdir = @libexecdir@
>> -localedir = @localedir@
>> -localstatedir = @localstatedir@
>> -mandir = @mandir@
>> -mkdir_p = @mkdir_p@
>> -oldincludedir = @oldincludedir@
>> -pdfdir = @pdfdir@
>> -prefix = @prefix@
>> -program_transform_name = @program_transform_name@
>> -psdir = @psdir@
>> -sbindir = @sbindir@
>> -sharedstatedir = @sharedstatedir@
>> -srcdir = @srcdir@
>> -sysconfdir = @sysconfdir@
>> -target = @target@
>> -target_alias = @target_alias@
>> -target_cpu = @target_cpu@
>> -target_os = @target_os@
>> -target_vendor = @target_vendor@
>> -top_build_prefix = @top_build_prefix@
>> -top_builddir = @top_builddir@
>> -top_srcdir = @top_srcdir@
>> -zlibdir = @zlibdir@
>> -zlibinc = @zlibinc@
>> -AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
>> -
>> -# What version of the manual you want; "all" includes everything
>> -CONFIG = all
>> -
>> -# Options to extract the man page from as.texinfo
>> -MANCONF = -Dman
>> -TEXI2POD = perl $(top_srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
>> -POD2MAN = pod2man --center="GNU Development Tools" \
>> - --release="binutils-$(VERSION)" --section=1
>> -
>> -
>> -# List of man pages generated from binutils.texi
>> -man_MANS = \
>> - addr2line.1 \
>> - ar.1 \
>> - dlltool.1 \
>> - nm.1 \
>> - objcopy.1 \
>> - objdump.1 \
>> - ranlib.1 \
>> - readelf.1 \
>> - size.1 \
>> - strings.1 \
>> - strip.1 \
>> - elfedit.1 \
>> - windres.1 \
>> - windmc.1 \
>> - $(DEMANGLER_NAME).1
>> -
>> -info_TEXINFOS = binutils.texi
>> -binutils_TEXI = $(srcdir)/binutils.texi
>> -AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
>> - -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc \
>> - --no-split
>> -
>> -TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
>> - -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
>> -
>> -MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
>> -all: all-am
>> -
>> -.SUFFIXES:
>> -.SUFFIXES: .dvi .ps
>> -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am
>> $(am__configure_deps)
>> - @for dep in $?; do \
>> - case '$(am__configure_deps)' in \
>> - *$$dep*) \
>> - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
>> ) \
>> - && { if test -f $@; then exit 0; else break; fi; }; \
>> - exit 1;; \
>> - esac; \
>> - done; \
>> - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
>> - $(am__cd) $(top_srcdir) && \
>> - $(AUTOMAKE) --foreign doc/Makefile
>> -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
>> - @case '$?' in \
>> - *config.status*) \
>> - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
>> - *) \
>> - echo ' cd $(top_builddir) && $(SHELL) ./config.status
>> $(subdir)/$@ $(am__depfiles_maybe)'; \
>> - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
>> $(am__depfiles_maybe);; \
>> - esac;
>> -
>> -$(top_builddir)/config.status: $(top_srcdir)/configure
>> $(CONFIG_STATUS_DEPENDENCIES)
>> - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
>> -
>> -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
>> - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
>> -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
>> - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
>> -$(am__aclocal_m4_deps):
>> -
>> -mostlyclean-libtool:
>> - -rm -f *.lo
>> -
>> -clean-libtool:
>> - -rm -rf .libs _libs
>> -
>> -binutils.info: binutils.texi
>> - $(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$"
>> && \
>> - rm -rf $$backupdir && mkdir $$backupdir && \
>> - if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
>> - for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9]
>> $(@:.info=).i[0-9][0-9]; do \
>> - if test -f $$f; then mv $$f $$backupdir; restore=mv; else :;
>> fi; \
>> - done; \
>> - else :; fi && \
>> - if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
>> - -o $@ `test -f 'binutils.texi' || echo
>> '$(srcdir)/'`binutils.texi; \
>> - then \
>> - rc=0; \
>> - else \
>> - rc=$$?; \
>> - $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
>> - fi; \
>> - rm -rf $$backupdir; exit $$rc
>> -
>> -binutils.dvi: binutils.texi
>> -
>> $(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS"
>> \
>> - MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I
>> $(srcdir)' \
>> - $(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@
>> $(AM_V_texidevnull) \
>> - `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
>> -
>> -binutils.pdf: binutils.texi
>> -
>> $(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS"
>> \
>> - MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I
>> $(srcdir)' \
>> - $(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@
>> $(AM_V_texidevnull) \
>> - `test -f 'binutils.texi' || echo '$(srcdir)/'`binutils.texi
>> -
>> -binutils.html: binutils.texi
>> - $(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
>> - $(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS)
>> $(MAKEINFOFLAGS) -I $(srcdir) \
>> - -o $(@:.html=.htp) `test -f 'binutils.texi' || echo
>> '$(srcdir)/'`binutils.texi; \
>> - then \
>> - rm -rf $@ && mv $(@:.html=.htp) $@; \
>> - else \
>> - rm -rf $(@:.html=.htp); exit 1; \
>> - fi
>> -.dvi.ps:
>> -
>> $(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS"
>> \
>> - $(DVIPS) $(AM_V_texinfo) -o $@ $<
>> -
>> -uninstall-dvi-am:
>> - @$(NORMAL_UNINSTALL)
>> - @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
>> - for p in $$list; do \
>> - $(am__strip_dir) \
>> - echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
>> - rm -f "$(DESTDIR)$(dvidir)/$$f"; \
>> - done
>> -
>> -uninstall-html-am:
>> - @$(NORMAL_UNINSTALL)
>> - @list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
>> - for p in $$list; do \
>> - $(am__strip_dir) \
>> - echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
>> - rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
>> - done
>> -
>> -uninstall-info-am:
>> - @$(PRE_UNINSTALL)
>> - @if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo);
>> then \
>> - list='$(INFO_DEPS)'; \
>> - for file in $$list; do \
>> - relfile=`echo "$$file" | sed 's|^.*/||'`; \
>> - echo " install-info --info-dir='$(DESTDIR)$(infodir)'
>> --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
>> - if install-info --info-dir="$(DESTDIR)$(infodir)" --remove
>> "$(DESTDIR)$(infodir)/$$relfile"; \
>> - then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" ||
>> exit 1; fi; \
>> - done; \
>> - else :; fi
>> - @$(NORMAL_UNINSTALL)
>> - @list='$(INFO_DEPS)'; \
>> - for file in $$list; do \
>> - relfile=`echo "$$file" | sed 's|^.*/||'`; \
>> - relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
>> - (if test -d "$(DESTDIR)$(infodir)" && cd
>> "$(DESTDIR)$(infodir)"; then \
>> - echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile
>> $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9]
>> $$relfile_i[0-9][0-9]"; \
>> - rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9]
>> $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
>> - else :; fi); \
>> - done
>> -
>> -uninstall-pdf-am:
>> - @$(NORMAL_UNINSTALL)
>> - @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
>> - for p in $$list; do \
>> - $(am__strip_dir) \
>> - echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
>> - rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
>> - done
>> -
>> -uninstall-ps-am:
>> - @$(NORMAL_UNINSTALL)
>> - @list='$(PSS)'; test -n "$(psdir)" || list=; \
>> - for p in $$list; do \
>> - $(am__strip_dir) \
>> - echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
>> - rm -f "$(DESTDIR)$(psdir)/$$f"; \
>> - done
>> -
>> -dist-info: $(INFO_DEPS)
>> - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
>> - list='$(INFO_DEPS)'; \
>> - for base in $$list; do \
>> - case $$base in \
>> - $(srcdir)/*) base=`echo "$$base" | sed
>> "s|^$$srcdirstrip/||"`;; \
>> - esac; \
>> - if test -f $$base; then d=.; else d=$(srcdir); fi; \
>> - base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
>> - for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9]
>> $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
>> - if test -f $$file; then \
>> - relfile=`expr "$$file" : "$$d/\(.*\)"`; \
>> - test -f "$(distdir)/$$relfile" || \
>> - cp -p $$file "$(distdir)/$$relfile"; \
>> - else :; fi; \
>> - done; \
>> - done
>> -
>> -mostlyclean-aminfo:
>> - -rm -rf binutils.t2d binutils.t2p
>> -
>> -clean-aminfo:
>> - -test -z "binutils.dvi binutils.pdf binutils.ps binutils.html" \
>> - || rm -rf binutils.dvi binutils.pdf binutils.ps binutils.html
>> -
>> -maintainer-clean-aminfo:
>> - @list='$(INFO_DEPS)'; for i in $$list; do \
>> - i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
>> - echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9]
>> $$i_i[0-9][0-9]"; \
>> - rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
>> - done
>> -install-man1: $(man_MANS)
>> - @$(NORMAL_INSTALL)
>> - @list1=''; \
>> - list2='$(man_MANS)'; \
>> - test -n "$(man1dir)" \
>> - && test -n "`echo $$list1$$list2`" \
>> - || exit 0; \
>> - echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
>> - $(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
>> - { for i in $$list1; do echo "$$i"; done; \
>> - if test -n "$$list2"; then \
>> - for i in $$list2; do echo "$$i"; done \
>> - | sed -n '/\.1[a-z]*$$/p'; \
>> - fi; \
>> - } | while read p; do \
>> - if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
>> - echo "$$d$$p"; echo "$$p"; \
>> - done | \
>> - sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
>> - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
>> - sed 'N;N;s,\n, ,g' | { \
>> - list=; while read file base inst; do \
>> - if test "$$base" = "$$inst"; then list="$$list $$file"; else \
>> - echo " $(INSTALL_DATA) '$$file'
>> '$(DESTDIR)$(man1dir)/$$inst'"; \
>> - $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" ||
>> exit $$?; \
>> - fi; \
>> - done; \
>> - for i in $$list; do echo "$$i"; done | $(am__base_list) | \
>> - while read files; do \
>> - test -z "$$files" || { \
>> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
>> - $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
>> - done; }
>> -
>> -uninstall-man1:
>> - @$(NORMAL_UNINSTALL)
>> - @list=''; test -n "$(man1dir)" || exit 0; \
>> - files=`{ for i in $$list; do echo "$$i"; done; \
>> - l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
>> - sed -n '/\.1[a-z]*$$/p'; \
>> - } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
>> - -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
>> - dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
>> -tags TAGS:
>> -
>> -ctags CTAGS:
>> -
>> -cscope cscopelist:
>> -
>> -
>> -distdir: $(DISTFILES)
>> - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
>> - topsrcdirstrip=`echo "$(top_srcdir)" | sed
>> 's/[].[^$$\\*]/\\\\&/g'`; \
>> - list='$(DISTFILES)'; \
>> - dist_files=`for file in $$list; do echo $$file; done | \
>> - sed -e "s|^$$srcdirstrip/||;t" \
>> - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
>> - case $$dist_files in \
>> - */*) $(MKDIR_P) `echo "$$dist_files" | \
>> - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
>> - sort -u` ;; \
>> - esac; \
>> - for file in $$dist_files; do \
>> - if test -f $$file || test -d $$file; then d=.; else
>> d=$(srcdir); fi; \
>> - if test -d $$d/$$file; then \
>> - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
>> - if test -d "$(distdir)/$$file"; then \
>> - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod
>> u+rwx {} \;; \
>> - fi; \
>> - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
>> - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
>> - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod
>> u+rwx {} \;; \
>> - fi; \
>> - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
>> - else \
>> - test -f "$(distdir)/$$file" \
>> - || cp -p $$d/$$file "$(distdir)/$$file" \
>> - || exit 1; \
>> - fi; \
>> - done
>> - $(MAKE) $(AM_MAKEFLAGS) \
>> - top_distdir="$(top_distdir)" distdir="$(distdir)" \
>> - dist-info
>> -check-am: all-am
>> -check: check-am
>> -all-am: Makefile $(INFO_DEPS) $(MANS)
>> -installdirs:
>> - for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
>> - test -z "$$dir" || $(MKDIR_P) "$$dir"; \
>> - done
>> -install: install-am
>> -install-exec: install-exec-am
>> -install-data: install-data-am
>> -uninstall: uninstall-am
>> -
>> -install-am: all-am
>> - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
>> -
>> -installcheck: installcheck-am
>> -install-strip:
>> - if test -z '$(STRIP)'; then \
>> - $(MAKE) $(AM_MAKEFLAGS)
>> INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
>> - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)"
>> INSTALL_STRIP_FLAG=-s \
>> - install; \
>> - else \
>> - $(MAKE) $(AM_MAKEFLAGS)
>> INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
>> - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)"
>> INSTALL_STRIP_FLAG=-s \
>> - "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
>> - fi
>> -mostlyclean-generic:
>> -
>> -clean-generic:
>> -
>> -distclean-generic:
>> - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
>> - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" ||
>> rm -f $(CONFIG_CLEAN_VPATH_FILES)
>> -
>> -maintainer-clean-generic:
>> - @echo "This command is intended for maintainers to use"
>> - @echo "it deletes files that may require special tools to rebuild."
>> - -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
>> -clean: clean-am
>> -
>> -clean-am: clean-aminfo clean-generic clean-libtool mostlyclean-am
>> -
>> -distclean: distclean-am
>> - -rm -f Makefile
>> -distclean-am: clean-am distclean-generic
>> -
>> -dvi: dvi-am
>> -
>> -dvi-am: $(DVIS)
>> -
>> -html: html-am
>> -
>> -html-am: $(HTMLS) html-local
>> -
>> -info: info-am
>> -
>> -info-am: $(INFO_DEPS) info-local
>> -
>> -install-data-am: install-info-am install-man
>> -
>> -install-dvi: install-dvi-am
>> -
>> -install-dvi-am: $(DVIS)
>> - @$(NORMAL_INSTALL)
>> - @list='$(DVIS)'; test -n "$(dvidir)" || list=; \
>> - if test -n "$$list"; then \
>> - echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
>> - $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
>> - fi; \
>> - for p in $$list; do \
>> - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
>> - echo "$$d$$p"; \
>> - done | $(am__base_list) | \
>> - while read files; do \
>> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
>> - $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
>> - done
>> -install-exec-am:
>> -
>> -install-html: install-html-am
>> -
>> -install-html-am: $(HTMLS)
>> - @$(NORMAL_INSTALL)
>> - @list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
>> - if test -n "$$list"; then \
>> - echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
>> - $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
>> - fi; \
>> - for p in $$list; do \
>> - if test -f "$$p" || test -d "$$p"; then d=; else
>> d="$(srcdir)/"; fi; \
>> - $(am__strip_dir) \
>> - d2=$$d$$p; \
>> - if test -d "$$d2"; then \
>> - echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
>> - $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
>> - echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
>> - $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit
>> $$?; \
>> - else \
>> - list2="$$list2 $$d2"; \
>> - fi; \
>> - done; \
>> - test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
>> - while read files; do \
>> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
>> - $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
>> - done; }
>> -install-info: install-info-am
>> -
>> -install-info-am: $(INFO_DEPS)
>> - @$(NORMAL_INSTALL)
>> - @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
>> - list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
>> - if test -n "$$list"; then \
>> - echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
>> - $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
>> - fi; \
>> - for file in $$list; do \
>> - case $$file in \
>> - $(srcdir)/*) file=`echo "$$file" | sed
>> "s|^$$srcdirstrip/||"`;; \
>> - esac; \
>> - if test -f $$file; then d=.; else d=$(srcdir); fi; \
>> - file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
>> - for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
>> - $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
>> - if test -f $$ifile; then \
>> - echo "$$ifile"; \
>> - else : ; fi; \
>> - done; \
>> - done | $(am__base_list) | \
>> - while read files; do \
>> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
>> - $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
>> - @$(POST_INSTALL)
>> - @if $(am__can_run_installinfo); then \
>> - list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
>> - for file in $$list; do \
>> - relfile=`echo "$$file" | sed 's|^.*/||'`; \
>> - echo " install-info --info-dir='$(DESTDIR)$(infodir)'
>> '$(DESTDIR)$(infodir)/$$relfile'";\
>> - install-info --info-dir="$(DESTDIR)$(infodir)"
>> "$(DESTDIR)$(infodir)/$$relfile" || :;\
>> - done; \
>> - else : ; fi
>> -install-man: install-man1
>> -
>> -install-pdf: install-pdf-am
>> -
>> -install-pdf-am: $(PDFS)
>> - @$(NORMAL_INSTALL)
>> - @list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
>> - if test -n "$$list"; then \
>> - echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
>> - $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
>> - fi; \
>> - for p in $$list; do \
>> - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
>> - echo "$$d$$p"; \
>> - done | $(am__base_list) | \
>> - while read files; do \
>> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
>> - $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
>> -install-ps: install-ps-am
>> -
>> -install-ps-am: $(PSS)
>> - @$(NORMAL_INSTALL)
>> - @list='$(PSS)'; test -n "$(psdir)" || list=; \
>> - if test -n "$$list"; then \
>> - echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
>> - $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
>> - fi; \
>> - for p in $$list; do \
>> - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
>> - echo "$$d$$p"; \
>> - done | $(am__base_list) | \
>> - while read files; do \
>> - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
>> - $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
>> -installcheck-am:
>> -
>> -maintainer-clean: maintainer-clean-am
>> - -rm -f Makefile
>> -maintainer-clean-am: distclean-am maintainer-clean-aminfo \
>> - maintainer-clean-generic
>> -
>> -mostlyclean: mostlyclean-am
>> -
>> -mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
>> - mostlyclean-libtool
>> -
>> -pdf: pdf-am
>> -
>> -pdf-am: $(PDFS)
>> -
>> -ps: ps-am
>> -
>> -ps-am: $(PSS)
>> -
>> -uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
>> - uninstall-man uninstall-pdf-am uninstall-ps-am
>> -
>> -uninstall-man: uninstall-man1
>> -
>> -.MAKE: install-am install-strip
>> -
>> -.PHONY: all all-am check check-am clean clean-aminfo clean-generic \
>> - clean-libtool cscopelist-am ctags-am dist-info distclean \
>> - distclean-generic distclean-libtool distdir dvi dvi-am html \
>> - html-am html-local info info-am info-local install install-am \
>> - install-data install-data-am install-dvi install-dvi-am \
>> - install-exec install-exec-am install-html install-html-am \
>> - install-info install-info-am install-man install-man1 \
>> - install-pdf install-pdf-am install-ps install-ps-am \
>> - install-strip installcheck installcheck-am installdirs \
>> - maintainer-clean maintainer-clean-aminfo \
>> - maintainer-clean-generic mostlyclean mostlyclean-aminfo \
>> - mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
>> - tags-am uninstall uninstall-am uninstall-dvi-am \
>> - uninstall-html-am uninstall-info-am uninstall-man \
>> - uninstall-man1 uninstall-pdf-am uninstall-ps-am
>> -
>> -.PRECIOUS: Makefile
>> -
>> -
>> -# Man page generation from texinfo
>> -addr2line.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI)
>> > addr2line.pod
>> - $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f addr2line.pod
>> -
>> -ar.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
>> - $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$
>> && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f ar.pod
>> -
>> -dlltool.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) >
>> dlltool.pod
>> - $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f dlltool.pod
>> -
>> -nm.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
>> - $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$
>> && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f nm.pod
>> -
>> -objcopy.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) >
>> objcopy.pod
>> - $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f objcopy.pod
>> -
>> -objdump.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) >
>> objdump.pod
>> - $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f objdump.pod
>> -
>> -ranlib.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) >
>> ranlib.pod
>> - $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f ranlib.pod
>> -
>> -readelf.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) >
>> readelf.pod
>> - $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f readelf.pod
>> -
>> -size.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) >
>> size.pod
>> - $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f size.pod
>> -
>> -strings.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) >
>> strings.pod
>> - $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f strings.pod
>> -
>> -strip.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) >
>> strip.pod
>> - $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f strip.pod
>> -
>> -elfedit.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) >
>> elfedit.pod
>> - $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f elfedit.pod
>> -
>> -windres.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) >
>> windres.pod
>> - $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f windres.pod
>> -
>> -windmc.1: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) >
>> windmc.pod
>> - $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f windmc.pod
>> -
>> -cxxfilt.man: $(binutils_TEXI)
>> - $(AM_V_GEN)touch $@
>> - $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) >
>> $(DEMANGLER_NAME).pod
>> - $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n
>> .na/d' > $@.T$$$$ && \
>> - mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> - $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
>> -
>> -$(DEMANGLER_NAME).1: cxxfilt.man Makefile
>> - $(AM_V_GEN)if test -f cxxfilt.man; then \
>> - man=cxxfilt.man; \
>> - else \
>> - man=$(srcdir)/cxxfilt.man; \
>> - fi; \
>> - sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
>> - -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
>> - > $(DEMANGLER_NAME).1
>> -
>> -html-local: binutils/index.html
>> -binutils/index.html: binutils.texi $(binutils_TEXINFOS)
>> - $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS)
>> $(MAKEINFOFLAGS) \
>> - --split=node -I$(srcdir) $(srcdir)/binutils.texi
>> -
>> -# Maintenance
>> -
>> -# We need it for the taz target in ../../Makefile.in.
>> -info-local: $(MANS)
>> -
>> -# Tell versions [3.59,3.63) of GNU make to not export all variables.
>> -# Otherwise a system limit (for SysV at least) may be exceeded.
>> -.NOEXPORT:
>> diff --git a/binutils/doc/Makefile.am b/binutils/doc/local.mk
>> similarity index 77%
>> rename from binutils/doc/Makefile.am
>> rename to binutils/doc/local.mk
>> index 90b238ddf8d9..687b3f65e6cb 100644
>> --- a/binutils/doc/Makefile.am
>> +++ b/binutils/doc/local.mk
>> @@ -6,19 +6,17 @@
>> # it under the terms of the GNU General Public License as published by
>> # the Free Software Foundation; either version 3 of the License, or
>> # (at your option) any later version.
>> -#
>> +#
>> # This program is distributed in the hope that it will be useful,
>> # but WITHOUT ANY WARRANTY; without even the implied warranty of
>> # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> # GNU General Public License for more details.
>> -#
>> +#
>> # You should have received a copy of the GNU General Public License
>> # along with this program; see the file COPYING3. If not see
>> # <http://www.gnu.org/licenses/>.
>> #
>> -AUTOMAKE_OPTIONS = info-in-builddir no-texinfo.tex foreign
>> -
>> # What version of the manual you want; "all" includes everything
>> CONFIG=all
>> @@ -32,155 +30,155 @@ POD2MAN = pod2man --center="GNU Development
>> Tools" \
>> # List of man pages generated from binutils.texi
>> man_MANS = \
>> - addr2line.1 \
>> - ar.1 \
>> - dlltool.1 \
>> - nm.1 \
>> - objcopy.1 \
>> - objdump.1 \
>> - ranlib.1 \
>> - readelf.1 \
>> - size.1 \
>> - strings.1 \
>> - strip.1 \
>> - elfedit.1 \
>> - windres.1 \
>> - windmc.1 \
>> - $(DEMANGLER_NAME).1
>> -
>> -info_TEXINFOS = binutils.texi
>> -binutils_TEXI = $(srcdir)/binutils.texi
>> -
>> -AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
>> - -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc \
>> + %D%/addr2line.1 \
>> + %D%/ar.1 \
>> + %D%/dlltool.1 \
>> + %D%/nm.1 \
>> + %D%/objcopy.1 \
>> + %D%/objdump.1 \
>> + %D%/ranlib.1 \
>> + %D%/readelf.1 \
>> + %D%/size.1 \
>> + %D%/strings.1 \
>> + %D%/strip.1 \
>> + %D%/elfedit.1 \
>> + %D%/windres.1 \
>> + %D%/windmc.1 \
>> + %D%/$(DEMANGLER_NAME).1
>> +
>> +info_TEXINFOS = %D%/binutils.texi
>> +binutils_TEXI = $(srcdir)/%D%/binutils.texi
>> +
>> +AM_MAKEINFOFLAGS = -I "$(srcdir)/%D%" -I "$(top_srcdir)/../libiberty" \
>> + -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc \
>> --no-split
>> -TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
>> - -I "$(top_srcdir)/../bfd/doc" -I ../../bfd/doc
>> +TEXI2DVI = texi2dvi -I "$(srcdir)/%D%" -I "$(top_srcdir)/../libiberty" \
>> + -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
>> # Man page generation from texinfo
>> -addr2line.1: $(binutils_TEXI)
>> +%D%/addr2line.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI)
>> > addr2line.pod
>> $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f addr2line.pod
>> -ar.1: $(binutils_TEXI)
>> +%D%/ar.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
>> $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f ar.pod
>> -dlltool.1: $(binutils_TEXI)
>> +%D%/dlltool.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) >
>> dlltool.pod
>> $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f dlltool.pod
>> -nm.1: $(binutils_TEXI)
>> +%D%/nm.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
>> $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f nm.pod
>> -objcopy.1: $(binutils_TEXI)
>> +%D%/objcopy.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) >
>> objcopy.pod
>> $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f objcopy.pod
>> -objdump.1: $(binutils_TEXI)
>> +%D%/objdump.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) >
>> objdump.pod
>> $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f objdump.pod
>> -ranlib.1: $(binutils_TEXI)
>> +%D%/ranlib.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) >
>> ranlib.pod
>> $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f ranlib.pod
>> -readelf.1: $(binutils_TEXI)
>> +%D%/readelf.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) >
>> readelf.pod
>> $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f readelf.pod
>> -size.1: $(binutils_TEXI)
>> +%D%/size.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) >
>> size.pod
>> $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f size.pod
>> -strings.1: $(binutils_TEXI)
>> +%D%/strings.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) >
>> strings.pod
>> $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f strings.pod
>> -strip.1: $(binutils_TEXI)
>> +%D%/strip.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) >
>> strip.pod
>> $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f strip.pod
>> -elfedit.1: $(binutils_TEXI)
>> +%D%/elfedit.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) >
>> elfedit.pod
>> $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f elfedit.pod
>> -windres.1: $(binutils_TEXI)
>> +%D%/windres.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) >
>> windres.pod
>> $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f windres.pod
>> -windmc.1: $(binutils_TEXI)
>> +%D%/windmc.1: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) >
>> windmc.pod
>> $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' >
>> $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f windmc.pod
>> -cxxfilt.man: $(binutils_TEXI)
>> +%D%/cxxfilt.man: $(binutils_TEXI)
>> $(AM_V_GEN)touch $@
>> $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) >
>> $(DEMANGLER_NAME).pod
>> $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n
>> .na/d' > $@.T$$$$ && \
>> mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
>> $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
>> -MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
>> +MAINTAINERCLEANFILES += $(man_MANS) %D%/binutils.info %D%/cxxfilt.man
>> -$(DEMANGLER_NAME).1: cxxfilt.man Makefile
>> - $(AM_V_GEN)if test -f cxxfilt.man; then \
>> - man=cxxfilt.man; \
>> +%D%/$(DEMANGLER_NAME).1: %D%/cxxfilt.man Makefile
>> + $(AM_V_GEN)if test -f %D%/cxxfilt.man; then \
>> + man=%D%/cxxfilt.man; \
>> else \
>> - man=$(srcdir)/cxxfilt.man; \
>> + man=$(srcdir)/%D%/cxxfilt.man; \
>> fi; \
>> sed -e 's/@PROGRAM@/$(DEMANGLER_NAME)/' \
>> -e 's/cxxfilt/$(DEMANGLER_NAME)/' < $$man \
>> - > $(DEMANGLER_NAME).1
>> + > %D%/$(DEMANGLER_NAME).1
>> -html-local: binutils/index.html
>> -binutils/index.html: binutils.texi $(binutils_TEXINFOS)
>> +html-local: %D%/binutils/index.html
>> +binutils/index.html: %D%/binutils.texi $(binutils_TEXINFOS)
>> $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS)
>> $(MAKEINFOFLAGS) \
>> - --split=node -I$(srcdir) $(srcdir)/binutils.texi
>> + --split=node -I$(srcdir) $(srcdir)/%D%/binutils.texi
>> # Maintenance
>> -# We need it for the taz target in ../../Makefile.in.
>> +# We need it for the taz target in ../Makefile.in.
>> info-local: $(MANS)
>>
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] binutils: merge doc subdir up a level
2021-11-30 10:18 ` Luis Machado
@ 2021-11-30 14:41 ` Jeff Law
2021-11-30 16:12 ` Jeff Law
1 sibling, 0 replies; 12+ messages in thread
From: Jeff Law @ 2021-11-30 14:41 UTC (permalink / raw)
To: Luis Machado, Mike Frysinger, binutils
On 11/30/2021 3:18 AM, Luis Machado via Binutils wrote:
> Sorry, forgot to mention, it is a --enable-targets=all build. Though I
> don't think that makes a difference.
It doesn't. Every target in my tester is failing because of this.
Jeff
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/2] binutils: merge doc subdir up a level
2021-11-30 10:18 ` Luis Machado
2021-11-30 14:41 ` Jeff Law
@ 2021-11-30 16:12 ` Jeff Law
1 sibling, 0 replies; 12+ messages in thread
From: Jeff Law @ 2021-11-30 16:12 UTC (permalink / raw)
To: Luis Machado, Mike Frysinger, binutils
On 11/30/2021 3:18 AM, Luis Machado via Binutils wrote:
> Sorry, forgot to mention, it is a --enable-targets=all build. Though I
> don't think that makes a difference.
I think those doc file targets are missing a dependency on the target
which creates the doc subdir in the build tree.
jeff
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH] binutils: add missing doc/dirstamp deps
2021-11-30 10:17 ` Luis Machado
2021-11-30 10:18 ` Luis Machado
@ 2021-11-30 16:35 ` Mike Frysinger
2021-11-30 17:38 ` Jeff Law
2021-11-30 17:41 ` Nick Clifton
1 sibling, 2 replies; 12+ messages in thread
From: Mike Frysinger @ 2021-11-30 16:35 UTC (permalink / raw)
To: binutils
Since configure no longer creates the subdir, we have to explicitly
depend on the dirstamp target.
---
binutils/Makefile.in | 30 +++++++++++++++---------------
binutils/doc/local.mk | 30 +++++++++++++++---------------
2 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/binutils/Makefile.in b/binutils/Makefile.in
index 336644a3983a..a5dc80989fda 100644
--- a/binutils/Makefile.in
+++ b/binutils/Makefile.in
@@ -2013,105 +2013,105 @@ install-exec-local: install-binPROGRAMS $(bin_PROGRAMS) $(noinst_PROGRAMS)
done
# Man page generation from texinfo
-doc/addr2line.1: $(binutils_TEXI)
+doc/addr2line.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
$(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f addr2line.pod
-doc/ar.1: $(binutils_TEXI)
+doc/ar.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
$(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f ar.pod
-doc/dlltool.1: $(binutils_TEXI)
+doc/dlltool.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
$(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f dlltool.pod
-doc/nm.1: $(binutils_TEXI)
+doc/nm.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
$(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f nm.pod
-doc/objcopy.1: $(binutils_TEXI)
+doc/objcopy.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
$(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f objcopy.pod
-doc/objdump.1: $(binutils_TEXI)
+doc/objdump.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
$(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f objdump.pod
-doc/ranlib.1: $(binutils_TEXI)
+doc/ranlib.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
$(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f ranlib.pod
-doc/readelf.1: $(binutils_TEXI)
+doc/readelf.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
$(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f readelf.pod
-doc/size.1: $(binutils_TEXI)
+doc/size.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
$(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f size.pod
-doc/strings.1: $(binutils_TEXI)
+doc/strings.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
$(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f strings.pod
-doc/strip.1: $(binutils_TEXI)
+doc/strip.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
$(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f strip.pod
-doc/elfedit.1: $(binutils_TEXI)
+doc/elfedit.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
$(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f elfedit.pod
-doc/windres.1: $(binutils_TEXI)
+doc/windres.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
$(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f windres.pod
-doc/windmc.1: $(binutils_TEXI)
+doc/windmc.1: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
$(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f windmc.pod
-doc/cxxfilt.man: $(binutils_TEXI)
+doc/cxxfilt.man: $(binutils_TEXI) doc/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
$(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
diff --git a/binutils/doc/local.mk b/binutils/doc/local.mk
index 687b3f65e6cb..718ae02fd7d5 100644
--- a/binutils/doc/local.mk
+++ b/binutils/doc/local.mk
@@ -56,105 +56,105 @@ TEXI2DVI = texi2dvi -I "$(srcdir)/%D%" -I "$(top_srcdir)/../libiberty" \
-I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
# Man page generation from texinfo
-%D%/addr2line.1: $(binutils_TEXI)
+%D%/addr2line.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
$(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f addr2line.pod
-%D%/ar.1: $(binutils_TEXI)
+%D%/ar.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
$(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f ar.pod
-%D%/dlltool.1: $(binutils_TEXI)
+%D%/dlltool.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
$(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f dlltool.pod
-%D%/nm.1: $(binutils_TEXI)
+%D%/nm.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
$(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f nm.pod
-%D%/objcopy.1: $(binutils_TEXI)
+%D%/objcopy.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
$(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f objcopy.pod
-%D%/objdump.1: $(binutils_TEXI)
+%D%/objdump.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
$(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f objdump.pod
-%D%/ranlib.1: $(binutils_TEXI)
+%D%/ranlib.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
$(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f ranlib.pod
-%D%/readelf.1: $(binutils_TEXI)
+%D%/readelf.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
$(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f readelf.pod
-%D%/size.1: $(binutils_TEXI)
+%D%/size.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
$(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f size.pod
-%D%/strings.1: $(binutils_TEXI)
+%D%/strings.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
$(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f strings.pod
-%D%/strip.1: $(binutils_TEXI)
+%D%/strip.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
$(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f strip.pod
-%D%/elfedit.1: $(binutils_TEXI)
+%D%/elfedit.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
$(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f elfedit.pod
-%D%/windres.1: $(binutils_TEXI)
+%D%/windres.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
$(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f windres.pod
-%D%/windmc.1: $(binutils_TEXI)
+%D%/windmc.1: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
$(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
$(AM_V_at)rm -f windmc.pod
-%D%/cxxfilt.man: $(binutils_TEXI)
+%D%/cxxfilt.man: $(binutils_TEXI) %D%/$(am__dirstamp)
$(AM_V_GEN)touch $@
$(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
$(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
--
2.33.0
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] binutils: add missing doc/dirstamp deps
2021-11-30 16:35 ` [PATCH] binutils: add missing doc/dirstamp deps Mike Frysinger
@ 2021-11-30 17:38 ` Jeff Law
2021-11-30 17:41 ` Nick Clifton
1 sibling, 0 replies; 12+ messages in thread
From: Jeff Law @ 2021-11-30 17:38 UTC (permalink / raw)
To: Mike Frysinger, binutils
On 11/30/2021 9:35 AM, Mike Frysinger via Binutils wrote:
> Since configure no longer creates the subdir, we have to explicitly
> depend on the dirstamp target.
Yea, I'd come to the same conclusion and have an equivalent patch in my
tester.
jeff
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH] binutils: add missing doc/dirstamp deps
2021-11-30 16:35 ` [PATCH] binutils: add missing doc/dirstamp deps Mike Frysinger
2021-11-30 17:38 ` Jeff Law
@ 2021-11-30 17:41 ` Nick Clifton
1 sibling, 0 replies; 12+ messages in thread
From: Nick Clifton @ 2021-11-30 17:41 UTC (permalink / raw)
To: Mike Frysinger, binutils
Hi Mike,
> Since configure no longer creates the subdir, we have to explicitly
> depend on the dirstamp target.
> ---
> binutils/Makefile.in | 30 +++++++++++++++---------------
> binutils/doc/local.mk | 30 +++++++++++++++---------------
> 2 files changed, 30 insertions(+), 30 deletions(-)
Patch approved - please apply.
Cheers
Nick
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2021-11-30 17:41 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-26 3:59 [PATCH] bfd: enable silent build rules Mike Frysinger
2021-11-26 4:15 ` [PATCH 1/2] binutils: " Mike Frysinger
2021-11-26 4:16 ` [PATCH 2/2] binutils: merge doc subdir up a level Mike Frysinger
2021-11-29 13:30 ` Nick Clifton
2021-11-30 10:17 ` Luis Machado
2021-11-30 10:18 ` Luis Machado
2021-11-30 14:41 ` Jeff Law
2021-11-30 16:12 ` Jeff Law
2021-11-30 16:35 ` [PATCH] binutils: add missing doc/dirstamp deps Mike Frysinger
2021-11-30 17:38 ` Jeff Law
2021-11-30 17:41 ` Nick Clifton
2021-11-29 13:31 ` [PATCH 1/2] binutils: enable silent build rules Nick Clifton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).