From: Indu Bhagat <indu.bhagat@oracle.com>
To: binutils@sourceware.org
Cc: Indu Bhagat <indu.bhagat@oracle.com>
Subject: [PATCH,V3 10/15] gdb: sim: buildsystem changes to accommodate libsframe
Date: Sun, 30 Oct 2022 00:44:45 -0700 [thread overview]
Message-ID: <20221030074450.1956074-11-indu.bhagat@oracle.com> (raw)
In-Reply-To: <20221030074450.1956074-1-indu.bhagat@oracle.com>
[Changes in V3]
- Additional diff in sim/ppc/Makefile.in to accommodate libsframe.
This is needed to ensure --enable-targets=all continues to build.
- Addressed review comments by Mike Frysinger.
[End of changes in V3]
[No changes in V2]
Both gdb and sim need buildsystem fixes to now include libsframe for a
successful build.
---
gdb/Makefile.in | 7 +++++--
gdb/acinclude.m4 | 4 ++--
gdb/configure | 8 ++++----
sim/common/Make-common.in | 7 +++++--
sim/ppc/Makefile.in | 5 +++--
5 files changed, 19 insertions(+), 12 deletions(-)
mode change 100755 => 100644 gdb/configure
diff --git a/gdb/Makefile.in b/gdb/Makefile.in
index c528ee5aa80..98157498fdb 100644
--- a/gdb/Makefile.in
+++ b/gdb/Makefile.in
@@ -161,6 +161,9 @@ LIBIBERTY = ../libiberty/libiberty.a
LIBCTF = @LIBCTF@
CTF_DEPS = @CTF_DEPS@
+# Where is the SFrame library? Typically in ../libsframe.
+LIBSFRAME = ../libsframe/.libs/libsframe.a
+
# Where is the BFD library? Typically in ../bfd.
BFD_DIR = ../bfd
BFD = $(BFD_DIR)/libbfd.a
@@ -650,7 +653,7 @@ INTERNAL_LDFLAGS = \
# Libraries and corresponding dependencies for compiling gdb.
# XM_CLIBS, defined in *config files, have host-dependent libs.
# LIBIBERTY appears twice on purpose.
-CLIBS = $(SIM) $(READLINE) $(OPCODES) $(LIBCTF) $(BFD) $(ZLIB) $(ZSTD_LIBS) \
+CLIBS = $(SIM) $(READLINE) $(OPCODES) $(LIBCTF) $(BFD) $(LIBSFRAME) $(ZLIB) $(ZSTD_LIBS) \
$(LIBSUPPORT) $(INTL) $(LIBIBERTY) $(LIBDECNUMBER) \
$(XM_CLIBS) $(GDBTKLIBS) $(LIBBACKTRACE_LIB) \
@LIBS@ @GUILE_LIBS@ @PYTHON_LIBS@ \
@@ -658,7 +661,7 @@ CLIBS = $(SIM) $(READLINE) $(OPCODES) $(LIBCTF) $(BFD) $(ZLIB) $(ZSTD_LIBS) \
$(WIN32LIBS) $(LIBGNU) $(LIBGNU_EXTRA_LIBS) $(LIBICONV) \
$(LIBMPFR) $(LIBGMP) $(SRCHIGH_LIBS) $(LIBXXHASH) $(PTHREAD_LIBS) \
$(DEBUGINFOD_LIBS) $(LIBBABELTRACE_LIB)
-CDEPS = $(NAT_CDEPS) $(SIM) $(BFD) $(READLINE_DEPS) $(CTF_DEPS) \
+CDEPS = $(NAT_CDEPS) $(SIM) $(BFD) $(LIBSFRAME) $(READLINE_DEPS) $(CTF_DEPS) \
$(OPCODES) $(INTL_DEPS) $(LIBIBERTY) $(CONFIG_DEPS) $(LIBGNU) \
$(LIBSUPPORT)
diff --git a/gdb/acinclude.m4 b/gdb/acinclude.m4
index 62fa66c7af3..8bbc5f0739e 100644
--- a/gdb/acinclude.m4
+++ b/gdb/acinclude.m4
@@ -234,9 +234,9 @@ AC_DEFUN([GDB_AC_CHECK_BFD], [
# always want our bfd.
CFLAGS="-I${srcdir}/../include -I../bfd -I${srcdir}/../bfd $CFLAGS"
ZLIBDIR=`echo $zlibdir | sed 's,\$(top_builddir)/,,g'`
- LDFLAGS="-L../bfd -L../libiberty $ZLIBDIR $LDFLAGS"
+ LDFLAGS="-L../bfd -L../libiberty -L../libsframe/.libs/ $ZLIBDIR $LDFLAGS"
intl=`echo $LIBINTL | sed 's,${top_builddir}/,,g'`
- LIBS="-lbfd -liberty -lz $ZSTD_LIBS $intl $LIBS"
+ LIBS="-lbfd -liberty -lz -lsframe $ZSTD_LIBS $intl $LIBS"
AC_CACHE_CHECK(
[$1],
[$2],
diff --git a/gdb/configure b/gdb/configure
old mode 100755
new mode 100644
index 33677262783..71288533efd
--- a/gdb/configure
+++ b/gdb/configure
@@ -17412,9 +17412,9 @@ WIN32LIBS="$WIN32LIBS $WIN32APILIBS"
# always want our bfd.
CFLAGS="-I${srcdir}/../include -I../bfd -I${srcdir}/../bfd $CFLAGS"
ZLIBDIR=`echo $zlibdir | sed 's,\$(top_builddir)/,,g'`
- LDFLAGS="-L../bfd -L../libiberty $ZLIBDIR $LDFLAGS"
+ LDFLAGS="-L../bfd -L../libiberty -L../libsframe/.libs/ $ZLIBDIR $LDFLAGS"
intl=`echo $LIBINTL | sed 's,${top_builddir}/,,g'`
- LIBS="-lbfd -liberty -lz $ZSTD_LIBS $intl $LIBS"
+ LIBS="-lbfd -liberty -lz -lsframe $ZSTD_LIBS $intl $LIBS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ELF support in BFD" >&5
$as_echo_n "checking for ELF support in BFD... " >&6; }
if ${gdb_cv_var_elf+:} false; then :
@@ -17527,9 +17527,9 @@ fi
# always want our bfd.
CFLAGS="-I${srcdir}/../include -I../bfd -I${srcdir}/../bfd $CFLAGS"
ZLIBDIR=`echo $zlibdir | sed 's,\$(top_builddir)/,,g'`
- LDFLAGS="-L../bfd -L../libiberty $ZLIBDIR $LDFLAGS"
+ LDFLAGS="-L../bfd -L../libiberty -L../libsframe/.libs/ $ZLIBDIR $LDFLAGS"
intl=`echo $LIBINTL | sed 's,${top_builddir}/,,g'`
- LIBS="-lbfd -liberty -lz $ZSTD_LIBS $intl $LIBS"
+ LIBS="-lbfd -liberty -lz -lsframe $ZSTD_LIBS $intl $LIBS"
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for Mach-O support in BFD" >&5
$as_echo_n "checking for Mach-O support in BFD... " >&6; }
if ${gdb_cv_var_macho+:} false; then :
diff --git a/sim/common/Make-common.in b/sim/common/Make-common.in
index b07ec96e147..8a49e0b4ef2 100644
--- a/sim/common/Make-common.in
+++ b/sim/common/Make-common.in
@@ -222,11 +222,14 @@ SIM_HW_DEVICES = cfi core pal glue $(SIM_EXTRA_HW_DEVICES)
ZLIB = $(zlibdir) -lz
LIBIBERTY_LIB = ../../libiberty/libiberty.a
BFD_LIB = ../../bfd/libbfd.a
+LIBSFRAME_LIB = ../../libsframe/.libs/libsframe.a
OPCODES_LIB = ../../opcodes/libopcodes.a
CONFIG_LIBS = $(COMMON_LIBS) @LIBS@ $(ZLIB) $(ZSTD_LIBS)
-LIBDEPS = $(BFD_LIB) $(OPCODES_LIB) $(LIBINTL_DEP) $(LIBIBERTY_LIB)
+LIBDEPS = $(BFD_LIB) $(OPCODES_LIB) $(LIBINTL_DEP) $(LIBIBERTY_LIB) \
+ $(LIBSFRAME_LIB)
EXTRA_LIBS = $(BFD_LIB) $(OPCODES_LIB) $(LIBINTL) $(LIBIBERTY_LIB) \
- $(CONFIG_LIBS) $(SIM_EXTRA_LIBS) $(LIBDL) $(LIBGNU) $(LIBGNU_EXTRA_LIBS)
+ $(LIBSFRAME_LIB) $(CONFIG_LIBS) $(SIM_EXTRA_LIBS) \
+ $(LIBDL) $(LIBGNU) $(LIBGNU_EXTRA_LIBS)
COMMON_OBJS_NAMES = \
callback.o \
diff --git a/sim/ppc/Makefile.in b/sim/ppc/Makefile.in
index b0c073b8867..12123d36a66 100644
--- a/sim/ppc/Makefile.in
+++ b/sim/ppc/Makefile.in
@@ -133,6 +133,7 @@ INCLUDES = -I. -I$(srcdir) $(LIB_INCLUDES) $(BFD_INCLUDES) $(GDB_INCLUDES) -I../
LIBIBERTY_LIB = ../../libiberty/libiberty.a
BFD_LIB = ../../bfd/libbfd.a
+SFRAME_LIB = ../../libsframe/.libs/libsframe.a
ZLIB = $(zlibdir) -lz
@@ -521,8 +522,8 @@ PACKAGE_SRC = @sim_pk_src@
PACKAGE_OBJ = @sim_pk_obj@
-psim$(EXEEXT): $(TARGETLIB) main.o $(LIBIBERTY_LIB) $(BFD_LIB) $(LIBINTL_DEP)
- $(ECHO_CCLD) $(CC) $(CFLAGS) $(LDFLAGS) -o psim$(EXEEXT) main.o $(TARGETLIB) $(BFD_LIB) $(ZLIB) $(ZSTD_LIBS) $(LIBINTL) $(LIBIBERTY_LIB) $(LIBS)
+psim$(EXEEXT): $(TARGETLIB) main.o $(LIBIBERTY_LIB) $(BFD_LIB) $(SFRAME_LIB) $(LIBINTL_DEP)
+ $(ECHO_CCLD) $(CC) $(CFLAGS) $(LDFLAGS) -o psim$(EXEEXT) main.o $(TARGETLIB) $(BFD_LIB) $(SFRAME_LIB) $(ZLIB) $(ZSTD_LIBS) $(LIBINTL) $(LIBIBERTY_LIB) $(LIBS)
run$(EXEEXT): psim$(EXEEXT)
$(SILENCE) rm -f $@
--
2.37.2
next prev parent reply other threads:[~2022-10-30 7:45 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-30 7:44 [PATCH,V3 00/15] Definition and support for SFrame unwind format Indu Bhagat
2022-10-30 7:44 ` [PATCH,V3 01/15] sframe.h: Add SFrame format definition Indu Bhagat
2022-10-30 7:44 ` [PATCH,V3 02/15] gas: add new command line option --gsframe Indu Bhagat
2022-10-30 7:44 ` [PATCH,V3 03/15] gas: generate .sframe from CFI directives Indu Bhagat
2022-10-30 8:03 ` Mike Frysinger
2022-11-06 5:30 ` Indu Bhagat
2022-11-06 5:36 ` [PATCH,V3.1 " Indu Bhagat
2022-10-30 7:44 ` [PATCH,V3 04/15] gas: testsuite: add new tests for SFrame unwind info Indu Bhagat
2022-10-30 7:44 ` [PATCH,V3 05/15] libsframe: add the SFrame library Indu Bhagat
2022-10-30 7:44 ` [PATCH,V3 06/15] bfd: linker: merge .sframe sections Indu Bhagat
2022-10-30 13:33 ` Mike Frysinger
2022-10-30 7:44 ` [PATCH,V3 07/15] readelf/objdump: support for SFrame section Indu Bhagat
2022-10-30 7:44 ` [PATCH,V3 08/15] unwinder: generate backtrace using SFrame format Indu Bhagat
2022-10-30 14:03 ` Mike Frysinger
2022-11-01 22:36 ` [PATCH, V3 " Weimin Pan
2022-11-02 15:00 ` Mike Frysinger
2022-11-02 6:23 ` [PATCH,V3 " Indu Bhagat
2022-10-30 7:44 ` [PATCH,V3 09/15] unwinder: Add SFrame unwinder tests Indu Bhagat
2022-10-30 14:14 ` Mike Frysinger
2022-10-30 7:44 ` Indu Bhagat [this message]
2022-10-30 14:15 ` [PATCH, V3 10/15] gdb: sim: buildsystem changes to accommodate libsframe Mike Frysinger
2022-10-31 20:39 ` Indu Bhagat
2022-11-02 15:02 ` Mike Frysinger
2022-11-02 19:11 ` Jose E. Marchesi
2022-11-03 15:27 ` Mike Frysinger
2022-11-04 12:14 ` Jose E. Marchesi
2022-10-30 7:44 ` [PATCH,V3 11/15] libctf: add libsframe to LDFLAGS and LIBS Indu Bhagat
2022-10-30 13:27 ` Mike Frysinger
2022-10-31 20:06 ` Indu Bhagat
2022-11-01 18:57 ` Nick Alcock
2022-11-01 21:42 ` Andreas Schwab
2022-11-02 13:16 ` Nick Alcock
2022-11-04 19:02 ` [PATCH,V3.1,11/15] " Indu Bhagat
2022-11-04 21:01 ` [PATCH,V3.2,11/15] " Indu Bhagat
2022-11-05 9:21 ` Andreas Schwab
2022-11-07 22:28 ` [PATCH,V3.3 11/15] " Indu Bhagat
2022-11-08 3:26 ` Mike Frysinger
2022-11-08 19:26 ` Indu Bhagat
2022-10-30 7:44 ` [PATCH,V3 12/15] src-release.sh: Add libsframe Indu Bhagat
2022-10-30 7:44 ` [PATCH,V3 13/15] binutils/NEWS: add text for SFrame support Indu Bhagat
2022-10-30 7:44 ` [PATCH,V3 14/15] gas/NEWS: add text about new command line option and " Indu Bhagat
2022-10-30 8:05 ` [PATCH, V3 " Mike Frysinger
2022-10-31 23:17 ` Indu Bhagat
2022-10-30 7:44 ` [PATCH,V3 15/15] doc: add SFrame spec file Indu Bhagat
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221030074450.1956074-11-indu.bhagat@oracle.com \
--to=indu.bhagat@oracle.com \
--cc=binutils@sourceware.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).