* PATCH: Update src/intl from gcc/intl
@ 2006-05-19 17:50 Steve Ellcey
2006-05-19 17:57 ` Nick Clifton
2006-05-19 18:50 ` DJ Delorie
0 siblings, 2 replies; 10+ messages in thread
From: Steve Ellcey @ 2006-05-19 17:50 UTC (permalink / raw)
To: binutils, gdb; +Cc: drow, gcc, ian
OK, Here is an official patch proposal to replace the contents of the
src/intl tree with the bits from gcc/intl.
I tested the change on HPPA and IA64 HP-UX and on IA64 Linux. The Linux
build didn't prove much because it used the system gettext bits but the
HP-UX builds built and used the new intl directory with no problems and
I am willing to try and fix any problems caused by the change if other
platforms have problems with it.
2006-05-19 Steve Ellcey <sje@cup.hp.com>
* MAINTAINERS: Change intl updating instructions.
* config.rpath: Copy from GCC tree.
* intl: Replace contents of intl directory with intl from GCC tree.
*** MAINTAINERS.orig Wed May 17 11:58:10 2006
--- MAINTAINERS Wed May 17 12:01:37 2006
*************** gdb/; readline/; sim/; GDB's part of inc
*** 47,61 ****
include/
See binutils/, gdb/, sid/, gcc/, libiberty/ etc.
! libiberty/; libiberty's part of include/
gcc: http://gcc.gnu.org
Changes need to be done in tandem with the official GCC
sources or submitted to the master file maintainer and brought
! in via a merge. Note: approved patches in gcc's libiberty
! are automatically approved in this libiberty also; feel free
! to merge them yourself if needed sooner than the next merge.
! Otherwise, changes are automatically merged, usually within
! a day.
ltconfig; ltmain.sh; ltcf-*.sh
libtool: http://www.gnu.org/software/libtool/
--- 47,61 ----
include/
See binutils/, gdb/, sid/, gcc/, libiberty/ etc.
! intl/; config.rhost; libiberty/; libiberty's part of include/
gcc: http://gcc.gnu.org
Changes need to be done in tandem with the official GCC
sources or submitted to the master file maintainer and brought
! in via a merge. Note: approved patches in gcc's libiberty or
! intl are automatically approved in this libiberty and intl also;
! feel free to merge them yourself if needed sooner than the next
! merge. Otherwise, changes are automatically merged, usually
! within a day.
ltconfig; ltmain.sh; ltcf-*.sh
libtool: http://www.gnu.org/software/libtool/
*************** winsup/
*** 99,105 ****
See also winsup/MAINTAINERS.
config-ml.in; makefile.vms; mkdep; setup.com;
! etc/; intl/; utils/;
Any global maintainer can approve changes to these
files and directories.
--- 99,105 ----
See also winsup/MAINTAINERS.
config-ml.in; makefile.vms; mkdep; setup.com;
! etc/; utils/;
Any global maintainer can approve changes to these
files and directories.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PATCH: Update src/intl from gcc/intl
2006-05-19 17:50 PATCH: Update src/intl from gcc/intl Steve Ellcey
@ 2006-05-19 17:57 ` Nick Clifton
2006-05-19 18:06 ` Daniel Jacobowitz
2006-05-19 18:50 ` DJ Delorie
1 sibling, 1 reply; 10+ messages in thread
From: Nick Clifton @ 2006-05-19 17:57 UTC (permalink / raw)
To: sje; +Cc: binutils, gdb, drow, gcc, ian
Hi Steve,
> OK, Here is an official patch proposal to replace the contents of the
> src/intl tree with the bits from gcc/intl.
> 2006-05-19 Steve Ellcey <sje@cup.hp.com>
>
> * MAINTAINERS: Change intl updating instructions.
> * config.rpath: Copy from GCC tree.
> * intl: Replace contents of intl directory with intl from GCC tree.
Approved for binutils.
Cheers
Nick
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PATCH: Update src/intl from gcc/intl
2006-05-19 17:57 ` Nick Clifton
@ 2006-05-19 18:06 ` Daniel Jacobowitz
0 siblings, 0 replies; 10+ messages in thread
From: Daniel Jacobowitz @ 2006-05-19 18:06 UTC (permalink / raw)
To: Nick Clifton; +Cc: sje, binutils, gdb, gcc, ian
On Fri, May 19, 2006 at 04:54:17PM +0100, Nick Clifton wrote:
> Hi Steve,
>
> >OK, Here is an official patch proposal to replace the contents of the
> >src/intl tree with the bits from gcc/intl.
>
> >2006-05-19 Steve Ellcey <sje@cup.hp.com>
> >
> > * MAINTAINERS: Change intl updating instructions.
> > * config.rpath: Copy from GCC tree.
> > * intl: Replace contents of intl directory with intl from GCC tree.
>
> Approved for binutils.
Fine for GDB, too.
--
Daniel Jacobowitz
CodeSourcery
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PATCH: Update src/intl from gcc/intl
2006-05-19 17:50 PATCH: Update src/intl from gcc/intl Steve Ellcey
2006-05-19 17:57 ` Nick Clifton
@ 2006-05-19 18:50 ` DJ Delorie
2006-05-19 19:22 ` Steve Ellcey
1 sibling, 1 reply; 10+ messages in thread
From: DJ Delorie @ 2006-05-19 18:50 UTC (permalink / raw)
To: sje; +Cc: binutils, gdb, drow, gcc, ian
> ! intl/; config.rhost; libiberty/; libiberty's part
> ! ...
> ! merge. Otherwise, changes are automatically merged, usually
> ! within a day.
Who signed up to do the automatic merge?
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PATCH: Update src/intl from gcc/intl
2006-05-19 18:50 ` DJ Delorie
@ 2006-05-19 19:22 ` Steve Ellcey
2006-05-20 12:43 ` DJ Delorie
0 siblings, 1 reply; 10+ messages in thread
From: Steve Ellcey @ 2006-05-19 19:22 UTC (permalink / raw)
To: dj; +Cc: binutils, gdb, drow, gcc, ian
> > ! intl/; config.rhost; libiberty/; libiberty's part
> > ! ...
> > ! merge. Otherwise, changes are automatically merged, usually
> > ! within a day.
>
> Who signed up to do the automatic merge?
I will unless you want to add this to the libiberty merge you do now.
intl changes even less than libiberty does. The src version of intl has
4 changes since January of 2002. The GCC version has 8 changes since
Zack put the gettext 0.12.1 version in back in July 2003.
Steve Ellcey
sje@cup.hp.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PATCH: Update src/intl from gcc/intl
2006-05-19 19:22 ` Steve Ellcey
@ 2006-05-20 12:43 ` DJ Delorie
2006-05-20 13:58 ` Mark Mitchell
2006-05-22 20:39 ` Steve Ellcey
0 siblings, 2 replies; 10+ messages in thread
From: DJ Delorie @ 2006-05-20 12:43 UTC (permalink / raw)
To: sje; +Cc: binutils, gdb, drow, gcc, ian
> I will unless you want to add this to the libiberty merge you do now.
I don't mind adding it to my script, if people agree that's what they
want. It's just that nobody asked :-P
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PATCH: Update src/intl from gcc/intl
2006-05-20 12:43 ` DJ Delorie
@ 2006-05-20 13:58 ` Mark Mitchell
2006-05-22 22:37 ` DJ Delorie
2006-05-22 20:39 ` Steve Ellcey
1 sibling, 1 reply; 10+ messages in thread
From: Mark Mitchell @ 2006-05-20 13:58 UTC (permalink / raw)
To: DJ Delorie; +Cc: sje, binutils, gdb, drow, gcc, ian
DJ Delorie wrote:
>> I will unless you want to add this to the libiberty merge you do now.
>
> I don't mind adding it to my script, if people agree that's what they
> want. It's just that nobody asked :-P
I hereby request that you add automatic intl/ merging to your script. :-)
--
Mark Mitchell
CodeSourcery
mark@codesourcery.com
(650) 331-3385 x713
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PATCH: Update src/intl from gcc/intl
2006-05-20 12:43 ` DJ Delorie
2006-05-20 13:58 ` Mark Mitchell
@ 2006-05-22 20:39 ` Steve Ellcey
2006-05-22 23:47 ` DJ Delorie
1 sibling, 1 reply; 10+ messages in thread
From: Steve Ellcey @ 2006-05-22 20:39 UTC (permalink / raw)
To: dj; +Cc: drow, ian, mark, binutils, gdb
DJ,
I have updated the intl directory to match the GCC directory so if you
could add that to your libiberty merge process that would be great. I
also copied config.rpath over at the top level so that should be added
too.
If anyone runs into a problem with the new intl directory bits please
let me know and I will try to fix any problems that arise.
Steve Ellcey
sje@cup.hp.com
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PATCH: Update src/intl from gcc/intl
2006-05-20 13:58 ` Mark Mitchell
@ 2006-05-22 22:37 ` DJ Delorie
0 siblings, 0 replies; 10+ messages in thread
From: DJ Delorie @ 2006-05-22 22:37 UTC (permalink / raw)
To: mark; +Cc: sje, binutils, gdb, drow, gcc, ian
> I hereby request that you add automatic intl/ merging to your script. :-)
Ok :-)
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: PATCH: Update src/intl from gcc/intl
2006-05-22 20:39 ` Steve Ellcey
@ 2006-05-22 23:47 ` DJ Delorie
0 siblings, 0 replies; 10+ messages in thread
From: DJ Delorie @ 2006-05-22 23:47 UTC (permalink / raw)
To: sje; +Cc: drow, ian, mark, binutils, gdb
> I have updated the intl directory to match the GCC directory so if
> you could add that to your libiberty merge process that would be
> great. I also copied config.rpath over at the top level so that
> should be added too.
All set.
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2006-05-22 17:59 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-05-19 17:50 PATCH: Update src/intl from gcc/intl Steve Ellcey
2006-05-19 17:57 ` Nick Clifton
2006-05-19 18:06 ` Daniel Jacobowitz
2006-05-19 18:50 ` DJ Delorie
2006-05-19 19:22 ` Steve Ellcey
2006-05-20 12:43 ` DJ Delorie
2006-05-20 13:58 ` Mark Mitchell
2006-05-22 22:37 ` DJ Delorie
2006-05-22 20:39 ` Steve Ellcey
2006-05-22 23:47 ` DJ Delorie
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).