From: Jan Beulich <jbeulich@suse.com>
To: Binutils <binutils@sourceware.org>
Cc: Nick Clifton <nickc@redhat.com>,
"ramana.radhakrishnan@arm.com" <ramana.radhakrishnan@arm.com>,
Richard Earnshaw <rearnsha@arm.com>
Subject: [PATCH 09/11] Arm: relax gas testsuite whitespace expectations
Date: Fri, 28 Jun 2024 15:24:13 +0200 [thread overview]
Message-ID: <707a3cd8-9cc2-4900-a20f-58ac5b07eee3@suse.com> (raw)
In-Reply-To: <f12de588-f77f-41b5-a6d0-83c1eb7de05c@suse.com>
In a subsequent change the scrubber is going to be changed to retain
further whitespace. Test case expectations generally would better not
depend on the specific whitespace treatment by the scrubber, unless of
course a test is specifically about it. Adjust relevant test cases to
permit blanks where those will subsequently appear.
---
This is adding just the blanks that are going to be needed; imo it would
generally be better if test case expectations were, from the very
beginning, written to focus on what is being tested, rather than taking
verbatim copies of the respective tool's output.
--- a/gas/testsuite/gas/arm/addthumb2err.l
+++ b/gas/testsuite/gas/arm/addthumb2err.l
@@ -1,21 +1,21 @@
[^:]*: Assembler messages:
-[^:]*:9: Error: shift value over 3 not allowed in thumb mode -- `add sp,sp,r0,LSL#4'
-[^:]*:10: Error: only LSL shift allowed in thumb mode -- `add sp,sp,r0,LSR#3'
-[^:]*:11: Error: only LSL shift allowed in thumb mode -- `add sp,sp,r0,ASR#3'
-[^:]*:12: Error: only LSL shift allowed in thumb mode -- `add sp,sp,r0,ROR#3'
+[^:]*:9: Error: shift value over 3 not allowed in thumb mode -- `add sp,sp,r0,LSL ?#4'
+[^:]*:10: Error: only LSL shift allowed in thumb mode -- `add sp,sp,r0,LSR ?#3'
+[^:]*:11: Error: only LSL shift allowed in thumb mode -- `add sp,sp,r0,ASR ?#3'
+[^:]*:12: Error: only LSL shift allowed in thumb mode -- `add sp,sp,r0,ROR ?#3'
[^:]*:13: Error: only LSL shift allowed in thumb mode -- `add sp,sp,r0,RRX'
-[^:]*:14: Error: shift value over 3 not allowed in thumb mode -- `adds sp,sp,r0,LSL#4'
-[^:]*:15: Error: only LSL shift allowed in thumb mode -- `adds sp,sp,r0,LSR#3'
-[^:]*:16: Error: only LSL shift allowed in thumb mode -- `adds sp,sp,r0,ASR#3'
-[^:]*:17: Error: only LSL shift allowed in thumb mode -- `adds sp,sp,r0,ROR#3'
+[^:]*:14: Error: shift value over 3 not allowed in thumb mode -- `adds sp,sp,r0,LSL ?#4'
+[^:]*:15: Error: only LSL shift allowed in thumb mode -- `adds sp,sp,r0,LSR ?#3'
+[^:]*:16: Error: only LSL shift allowed in thumb mode -- `adds sp,sp,r0,ASR ?#3'
+[^:]*:17: Error: only LSL shift allowed in thumb mode -- `adds sp,sp,r0,ROR ?#3'
[^:]*:18: Error: only LSL shift allowed in thumb mode -- `adds sp,sp,r0,RRX'
-[^:]*:19: Error: shift value over 3 not allowed in thumb mode -- `sub sp,sp,r0,LSL#4'
-[^:]*:20: Error: only LSL shift allowed in thumb mode -- `sub sp,sp,r0,LSR#3'
-[^:]*:21: Error: only LSL shift allowed in thumb mode -- `sub sp,sp,r0,ASR#3'
-[^:]*:22: Error: only LSL shift allowed in thumb mode -- `sub sp,sp,r0,ROR#3'
+[^:]*:19: Error: shift value over 3 not allowed in thumb mode -- `sub sp,sp,r0,LSL ?#4'
+[^:]*:20: Error: only LSL shift allowed in thumb mode -- `sub sp,sp,r0,LSR ?#3'
+[^:]*:21: Error: only LSL shift allowed in thumb mode -- `sub sp,sp,r0,ASR ?#3'
+[^:]*:22: Error: only LSL shift allowed in thumb mode -- `sub sp,sp,r0,ROR ?#3'
[^:]*:23: Error: only LSL shift allowed in thumb mode -- `sub sp,sp,r0,RRX'
-[^:]*:24: Error: shift value over 3 not allowed in thumb mode -- `subs sp,sp,r0,LSL#4'
-[^:]*:25: Error: only LSL shift allowed in thumb mode -- `subs sp,sp,r0,LSR#3'
-[^:]*:26: Error: only LSL shift allowed in thumb mode -- `subs sp,sp,r0,ASR#3'
-[^:]*:27: Error: only LSL shift allowed in thumb mode -- `subs sp,sp,r0,ROR#3'
+[^:]*:24: Error: shift value over 3 not allowed in thumb mode -- `subs sp,sp,r0,LSL ?#4'
+[^:]*:25: Error: only LSL shift allowed in thumb mode -- `subs sp,sp,r0,LSR ?#3'
+[^:]*:26: Error: only LSL shift allowed in thumb mode -- `subs sp,sp,r0,ASR ?#3'
+[^:]*:27: Error: only LSL shift allowed in thumb mode -- `subs sp,sp,r0,ROR ?#3'
[^:]*:28: Error: only LSL shift allowed in thumb mode -- `subs sp,sp,r0,RRX'
--- a/gas/testsuite/gas/arm/arch7em-bad.l
+++ b/gas/testsuite/gas/arm/arch7em-bad.l
@@ -3,10 +3,10 @@
[^:]*:9: Error: selected processor does not support `pkhbt r9,r0,r0' in Thumb mode
[^:]*:10: Error: selected processor does not support `pkhbt r0,r9,r0' in Thumb mode
[^:]*:11: Error: selected processor does not support `pkhbt r0,r0,r9' in Thumb mode
-[^:]*:12: Error: selected processor does not support `pkhbt r0,r0,r0,lsl#0x14' in Thumb mode
-[^:]*:13: Error: selected processor does not support `pkhbt r0,r0,r0,lsl#3' in Thumb mode
+[^:]*:12: Error: selected processor does not support `pkhbt r0,r0,r0,lsl ?#0x14' in Thumb mode
+[^:]*:13: Error: selected processor does not support `pkhbt r0,r0,r0,lsl ?#3' in Thumb mode
[^:]*:14: Error: selected processor does not support `pkhtb r1,r2,r3' in Thumb mode
-[^:]*:15: Error: selected processor does not support `pkhtb r1,r2,r3,asr#0x11' in Thumb mode
+[^:]*:15: Error: selected processor does not support `pkhtb r1,r2,r3,asr ?#0x11' in Thumb mode
[^:]*:18: Error: selected processor does not support `qadd r1,r2,r3' in Thumb mode
[^:]*:19: Error: selected processor does not support `qadd16 r1,r2,r3' in Thumb mode
[^:]*:20: Error: selected processor does not support `qadd8 r1,r2,r3' in Thumb mode
@@ -121,10 +121,10 @@
[^:]*:143: Error: selected processor does not support `uxtb16 r1,r2' in Thumb mode
[^:]*:144: Error: selected processor does not support `uxtb16 r8,r9' in Thumb mode
[^:]*:147: Error: selected processor does not support `sxtab r0,r0,r0' in Thumb mode
-[^:]*:148: Error: selected processor does not support `sxtab r0,r0,r0,ror#0' in Thumb mode
-[^:]*:149: Error: selected processor does not support `sxtab r9,r0,r0,ror#8' in Thumb mode
-[^:]*:150: Error: selected processor does not support `sxtab r0,r9,r0,ror#16' in Thumb mode
-[^:]*:151: Error: selected processor does not support `sxtab r0,r0,r9,ror#24' in Thumb mode
+[^:]*:148: Error: selected processor does not support `sxtab r0,r0,r0,ror ?#0' in Thumb mode
+[^:]*:149: Error: selected processor does not support `sxtab r9,r0,r0,ror ?#8' in Thumb mode
+[^:]*:150: Error: selected processor does not support `sxtab r0,r9,r0,ror ?#16' in Thumb mode
+[^:]*:151: Error: selected processor does not support `sxtab r0,r0,r9,ror ?#24' in Thumb mode
[^:]*:153: Error: selected processor does not support `sxtab16 r1,r2,r3' in Thumb mode
[^:]*:154: Error: selected processor does not support `sxtah r1,r2,r3' in Thumb mode
[^:]*:155: Error: selected processor does not support `uxtab r1,r2,r3' in Thumb mode
--- a/gas/testsuite/gas/arm/mve-vldr-bad-1.l
+++ b/gas/testsuite/gas/arm/mve-vldr-bad-1.l
@@ -103,20 +103,20 @@
[^:]*:88: Error: vector predicated instruction should be in VPT/VPST block -- `vldrdt.u64 q0,\[r0,q1\]'
[^:]*:90: Error: instruction missing MVE vector predication code -- `vldrd.u64 q0,\[r0,q1\]'
[^:]*:92: Error: shift expression expected -- `vldrb.u8 q0,\[r0,q1,#0\]'
-[^:]*:93: Error: can not shift offsets when accessing less than half-word -- `vldrb.u8 q0,\[r0,q1,UXTW#1\]'
-[^:]*:94: Error: can not shift offsets when accessing less than half-word -- `vldrb.u16 q0,\[r0,q1,UXTW#1\]'
-[^:]*:95: Error: can not shift offsets when accessing less than half-word -- `vldrb.u32 q0,\[r0,q1,UXTW#1\]'
+[^:]*:93: Error: can not shift offsets when accessing less than half-word -- `vldrb.u8 q0,\[r0,q1,UXTW ?#1\]'
+[^:]*:94: Error: can not shift offsets when accessing less than half-word -- `vldrb.u16 q0,\[r0,q1,UXTW ?#1\]'
+[^:]*:95: Error: can not shift offsets when accessing less than half-word -- `vldrb.u32 q0,\[r0,q1,UXTW ?#1\]'
[^:]*:96: Error: shift expression expected -- `vldrh.u16 q0,\[r0,q1,#1\]'
-[^:]*:97: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrh.u16 q0,\[r0,q1,UXTW#2\]'
-[^:]*:98: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrh.u32 q0,\[r0,q1,UXTW#2\]'
-[^:]*:99: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrh.u16 q0,\[r0,q1,UXTW#3\]'
-[^:]*:100: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrh.u32 q0,\[r0,q1,UXTW#3\]'
+[^:]*:97: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrh.u16 q0,\[r0,q1,UXTW ?#2\]'
+[^:]*:98: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrh.u32 q0,\[r0,q1,UXTW ?#2\]'
+[^:]*:99: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrh.u16 q0,\[r0,q1,UXTW ?#3\]'
+[^:]*:100: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrh.u32 q0,\[r0,q1,UXTW ?#3\]'
[^:]*:101: Error: shift expression expected -- `vldrw.u32 q0,\[r0,q1,#2\]'
-[^:]*:102: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrw.u32 q0,\[r0,q1,UXTW#1\]'
-[^:]*:103: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrw.u32 q0,\[r0,q1,UXTW#3\]'
+[^:]*:102: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrw.u32 q0,\[r0,q1,UXTW ?#1\]'
+[^:]*:103: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrw.u32 q0,\[r0,q1,UXTW ?#3\]'
[^:]*:104: Error: shift expression expected -- `vldrd.u64 q0,\[r0,q1,#3\]'
-[^:]*:105: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrd.u64 q0,\[r0,q1,UXTW#1\]'
-[^:]*:106: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrd.u64 q0,\[r0,q1,UXTW#2\]'
-[^:]*:107: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrd.u64 q0,\[r0,q1,UXTW#4\]'
+[^:]*:105: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrd.u64 q0,\[r0,q1,UXTW ?#1\]'
+[^:]*:106: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrd.u64 q0,\[r0,q1,UXTW ?#2\]'
+[^:]*:107: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vldrd.u64 q0,\[r0,q1,UXTW ?#4\]'
--- a/gas/testsuite/gas/arm/mve-vldr-bad-3.l
+++ b/gas/testsuite/gas/arm/mve-vldr-bad-3.l
@@ -161,27 +161,27 @@
[^:]*:139: Error: bad element type for instruction -- `vldrb.p32 q0,\[r2,q3\]'
[^:]*:139: Error: bad element type for instruction -- `vldrb.p64 q0,\[r2,q3\]'
[^:]*:139: Error: bad element type for instruction -- `vldrb.s8 q0,\[r2,q3\]'
-[^:]*:142: Error: bad element type for instruction -- `vldrh.8 q0,\[r2,q3,uxtw#1\]'
-[^:]*:142: Error: bad element type for instruction -- `vldrh.32 q0,\[r2,q3,uxtw#1\]'
-[^:]*:142: Error: bad element type for instruction -- `vldrh.64 q0,\[r2,q3,uxtw#1\]'
-[^:]*:142: Error: bad element type for instruction -- `vldrh.f32 q0,\[r2,q3,uxtw#1\]'
-[^:]*:142: Error: bad element type for instruction -- `vldrh.f64 q0,\[r2,q3,uxtw#1\]'
-[^:]*:142: Error: bad element type for instruction -- `vldrh.p32 q0,\[r2,q3,uxtw#1\]'
-[^:]*:142: Error: bad element type for instruction -- `vldrh.p64 q0,\[r2,q3,uxtw#1\]'
-[^:]*:142: Error: bad element type for instruction -- `vldrh.s16 q0,\[r2,q3,uxtw#1\]'
-[^:]*:145: Error: bad element type for instruction -- `vldrw.8 q0,\[r2,q3,uxtw#2\]'
-[^:]*:145: Error: bad element type for instruction -- `vldrw.16 q0,\[r2,q3,uxtw#2\]'
-[^:]*:145: Error: bad element type for instruction -- `vldrw.64 q0,\[r2,q3,uxtw#2\]'
-[^:]*:145: Error: bad element type for instruction -- `vldrw.f16 q0,\[r2,q3,uxtw#2\]'
-[^:]*:145: Error: bad element type for instruction -- `vldrw.f64 q0,\[r2,q3,uxtw#2\]'
-[^:]*:145: Error: bad element type for instruction -- `vldrw.p16 q0,\[r2,q3,uxtw#2\]'
-[^:]*:145: Error: bad element type for instruction -- `vldrw.p64 q0,\[r2,q3,uxtw#2\]'
-[^:]*:145: Error: bad element type for instruction -- `vldrw.s32 q0,\[r2,q3,uxtw#2\]'
-[^:]*:148: Error: bad element type for instruction -- `vldrd.8 q0,\[r2,q3,uxtw#3\]'
-[^:]*:148: Error: bad element type for instruction -- `vldrd.16 q0,\[r2,q3,uxtw#3\]'
-[^:]*:148: Error: bad element type for instruction -- `vldrd.32 q0,\[r2,q3,uxtw#3\]'
-[^:]*:148: Error: bad element type for instruction -- `vldrd.f16 q0,\[r2,q3,uxtw#3\]'
-[^:]*:148: Error: bad element type for instruction -- `vldrd.f32 q0,\[r2,q3,uxtw#3\]'
-[^:]*:148: Error: bad element type for instruction -- `vldrd.p16 q0,\[r2,q3,uxtw#3\]'
-[^:]*:148: Error: bad element type for instruction -- `vldrd.p32 q0,\[r2,q3,uxtw#3\]'
-[^:]*:148: Error: bad element type for instruction -- `vldrd.s64 q0,\[r2,q3,uxtw#3\]'
+[^:]*:142: Error: bad element type for instruction -- `vldrh.8 q0,\[r2,q3,uxtw ?#1\]'
+[^:]*:142: Error: bad element type for instruction -- `vldrh.32 q0,\[r2,q3,uxtw ?#1\]'
+[^:]*:142: Error: bad element type for instruction -- `vldrh.64 q0,\[r2,q3,uxtw ?#1\]'
+[^:]*:142: Error: bad element type for instruction -- `vldrh.f32 q0,\[r2,q3,uxtw ?#1\]'
+[^:]*:142: Error: bad element type for instruction -- `vldrh.f64 q0,\[r2,q3,uxtw ?#1\]'
+[^:]*:142: Error: bad element type for instruction -- `vldrh.p32 q0,\[r2,q3,uxtw ?#1\]'
+[^:]*:142: Error: bad element type for instruction -- `vldrh.p64 q0,\[r2,q3,uxtw ?#1\]'
+[^:]*:142: Error: bad element type for instruction -- `vldrh.s16 q0,\[r2,q3,uxtw ?#1\]'
+[^:]*:145: Error: bad element type for instruction -- `vldrw.8 q0,\[r2,q3,uxtw ?#2\]'
+[^:]*:145: Error: bad element type for instruction -- `vldrw.16 q0,\[r2,q3,uxtw ?#2\]'
+[^:]*:145: Error: bad element type for instruction -- `vldrw.64 q0,\[r2,q3,uxtw ?#2\]'
+[^:]*:145: Error: bad element type for instruction -- `vldrw.f16 q0,\[r2,q3,uxtw ?#2\]'
+[^:]*:145: Error: bad element type for instruction -- `vldrw.f64 q0,\[r2,q3,uxtw ?#2\]'
+[^:]*:145: Error: bad element type for instruction -- `vldrw.p16 q0,\[r2,q3,uxtw ?#2\]'
+[^:]*:145: Error: bad element type for instruction -- `vldrw.p64 q0,\[r2,q3,uxtw ?#2\]'
+[^:]*:145: Error: bad element type for instruction -- `vldrw.s32 q0,\[r2,q3,uxtw ?#2\]'
+[^:]*:148: Error: bad element type for instruction -- `vldrd.8 q0,\[r2,q3,uxtw ?#3\]'
+[^:]*:148: Error: bad element type for instruction -- `vldrd.16 q0,\[r2,q3,uxtw ?#3\]'
+[^:]*:148: Error: bad element type for instruction -- `vldrd.32 q0,\[r2,q3,uxtw ?#3\]'
+[^:]*:148: Error: bad element type for instruction -- `vldrd.f16 q0,\[r2,q3,uxtw ?#3\]'
+[^:]*:148: Error: bad element type for instruction -- `vldrd.f32 q0,\[r2,q3,uxtw ?#3\]'
+[^:]*:148: Error: bad element type for instruction -- `vldrd.p16 q0,\[r2,q3,uxtw ?#3\]'
+[^:]*:148: Error: bad element type for instruction -- `vldrd.p32 q0,\[r2,q3,uxtw ?#3\]'
+[^:]*:148: Error: bad element type for instruction -- `vldrd.s64 q0,\[r2,q3,uxtw ?#3\]'
--- a/gas/testsuite/gas/arm/mve-vstr-bad-1.l
+++ b/gas/testsuite/gas/arm/mve-vstr-bad-1.l
@@ -45,7 +45,7 @@
[^:]*:4: Warning: instruction is UNPREDICTABLE in an IT block
[^:]*:36: *Info: macro .*
[^:]*:39: Error: shift expression expected -- `vstrh.16 q0,\[r0,q1,#1\]'
-[^:]*:40: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vstrh.16 q0,\[r0,q1,UXTW#2\]'
+[^:]*:40: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vstrh.16 q0,\[r0,q1,UXTW ?#2\]'
[^:]*:41: Error: bad element type for instruction -- `vstrw.8 q0,\[r0,q1\]'
[^:]*:42: Error: bad element type for instruction -- `vstrw.u8 q0,\[r0,q1\]'
[^:]*:43: Error: bad element type for instruction -- `vstrw.s8 q0,\[r0,q1\]'
@@ -71,8 +71,8 @@
[^:]*:4: Warning: instruction is UNPREDICTABLE in an IT block
[^:]*:53: *Info: macro .*
[^:]*:56: Error: shift expression expected -- `vstrw.32 q0,\[r0,q1,#2\]'
-[^:]*:57: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vstrw.32 q0,\[r0,q1,UXTW#1\]'
-[^:]*:58: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vstrw.32 q0,\[r0,q1,UXTW#3\]'
+[^:]*:57: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vstrw.32 q0,\[r0,q1,UXTW ?#1\]'
+[^:]*:58: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vstrw.32 q0,\[r0,q1,UXTW ?#3\]'
[^:]*:59: Error: bad element type for instruction -- `vstrd.8 q0,\[r0,q1\]'
[^:]*:60: Error: bad element type for instruction -- `vstrd.u8 q0,\[r0,q1\]'
[^:]*:61: Error: bad element type for instruction -- `vstrd.s8 q0,\[r0,q1\]'
@@ -100,9 +100,9 @@
[^:]*:77: Warning: instruction is UNPREDICTABLE in an IT block
[^:]*:83: *Info: macro .*
[^:]*:84: Error: shift expression expected -- `vstrd.64 q0,\[r0,q1,#3\]'
-[^:]*:85: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vstrd.64 q0,\[r0,q1,UXTW#1\]'
-[^:]*:86: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vstrd.64 q0,\[r0,q1,UXTW#2\]'
-[^:]*:87: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vstrd.64 q0,\[r0,q1,UXTW#4\]'
+[^:]*:85: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vstrd.64 q0,\[r0,q1,UXTW ?#1\]'
+[^:]*:86: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vstrd.64 q0,\[r0,q1,UXTW ?#2\]'
+[^:]*:87: Error: shift immediate must be 1, 2 or 3 for half-word, word or double-word accesses respectively -- `vstrd.64 q0,\[r0,q1,UXTW ?#4\]'
[^:]*:90: Error: syntax error -- `vstrbeq.32 q0,\[r0,q1\]'
[^:]*:91: Error: syntax error -- `vstrbeq.32 q0,\[r0,q1\]'
[^:]*:93: Error: syntax error -- `vstrbeq.32 q0,\[r0,q1\]'
--- a/gas/testsuite/gas/arm/neon-ldst-align-bad.l
+++ b/gas/testsuite/gas/arm/neon-ldst-align-bad.l
@@ -1,3 +1,3 @@
[^:]*: Assembler messages:
-[^:]*:1: Error: bad alignment -- `vld1.8 {d0},\[r0:128\]'
-[^:]*:2: Error: bad alignment -- `vld1.8 {q0},\[r0:256\]'
+[^:]*:1: Error: bad alignment -- `vld1.8 {d0},\[r0 ?:128\]'
+[^:]*:2: Error: bad alignment -- `vld1.8 {q0},\[r0 ?:256\]'
--- a/gas/testsuite/gas/arm/shift-bad.l
+++ b/gas/testsuite/gas/arm/shift-bad.l
@@ -1,9 +1,9 @@
.*shift-bad.s: Assembler messages:
-.*shift-bad.s:2: Error: extraneous shift as part of operand to shift insn -- `asr r0,r1,r2,ror#5'
+.*shift-bad.s:2: Error: extraneous shift as part of operand to shift insn -- `asr r0,r1,r2,ror ?#5'
.*shift-bad.s:3: Error: extraneous shift as part of operand to shift insn -- `ror r0,r1,r2,lsl r3'
-.*shift-bad.s:7: Error: extraneous shift as part of operand to shift insn -- `ror r0,r0,r2,lsl#1'
-.*shift-bad.s:8: Error: extraneous shift as part of operand to shift insn -- `lsl r0,r0,r2,lsl#1'
+.*shift-bad.s:7: Error: extraneous shift as part of operand to shift insn -- `ror r0,r0,r2,lsl ?#1'
+.*shift-bad.s:8: Error: extraneous shift as part of operand to shift insn -- `lsl r0,r0,r2,lsl ?#1'
.*shift-bad.s:9: Error: extraneous shift as part of operand to shift insn -- `lsl r0,r0,r2,asr r0'
-.*shift-bad.s:13: Error: extraneous shift as part of operand to shift insn -- `ror r0,r1,r2,lsl#1'
-.*shift-bad.s:14: Error: extraneous shift as part of operand to shift insn -- `lsl r0,r1,r2,lsl#1'
+.*shift-bad.s:13: Error: extraneous shift as part of operand to shift insn -- `ror r0,r1,r2,lsl ?#1'
+.*shift-bad.s:14: Error: extraneous shift as part of operand to shift insn -- `lsl r0,r1,r2,lsl ?#1'
.*shift-bad.s:15: Error: extraneous shift as part of operand to shift insn -- `lsl r0,r1,r2,asr r0'
--- a/gas/testsuite/gas/arm/sp-pc-validations-bad-t-v8a.l
+++ b/gas/testsuite/gas/arm/sp-pc-validations-bad-t-v8a.l
@@ -131,7 +131,7 @@
[^:]*:12: IT blocks containing more than one conditional instruction are performance deprecated in ARMv8-A and ARMv8-R
[^:]*:21: *Info: macro .*
[^:]*:45: *Info: macro .*
-[^:]*:12: Error: branch must be last instruction in IT block -- `ldreq.w r15,\[r0,r1,LSL#2\]'
+[^:]*:12: Error: branch must be last instruction in IT block -- `ldreq.w r15,\[r0,r1,LSL ?#2\]'
[^:]*:21: *Info: macro .*
[^:]*:45: *Info: macro .*
[^:]*:48: Error: r15 not allowed here -- `ldrb pc,\[r0,#4\]'
@@ -144,8 +144,8 @@
[^:]*:66: Error: r15 not allowed here -- `ldrb pc,\[r0,r1\]'
[^:]*:67: Error: cannot use register index with PC-relative addressing -- `ldrb r0,\[pc,r1\]'
[^:]*:68: Error: r15 not allowed here -- `ldrb r0,\[r1,pc\]'
-[^:]*:69: Error: r15 not allowed here -- `ldrb.w pc,\[r0,r1,LSL#1\]'
-[^:]*:71: Error: r15 not allowed here -- `ldrb.w r2,\[r0,pc,LSL#2\]'
+[^:]*:69: Error: r15 not allowed here -- `ldrb.w pc,\[r0,r1,LSL ?#1\]'
+[^:]*:71: Error: r15 not allowed here -- `ldrb.w r2,\[r0,pc,LSL ?#2\]'
[^:]*:75: Error: r15 not allowed here -- `ldrbt pc,\[r0,#4\]'
[^:]*:79: Error: r15 not allowed here -- `ldrd pc,r0,\[r1\]'
[^:]*:81: Error: r12 not allowed here -- `ldrd r12,\[r1\]'
@@ -184,8 +184,8 @@
[^:]*:149: Error: r15 not allowed here -- `ldrh pc,\[r0,r1\]'
[^:]*:150: Error: cannot use register index with PC-relative addressing -- `ldrh r0,\[pc,r1\]'
[^:]*:151: Error: r15 not allowed here -- `ldrh r0,\[r1,pc\]'
-[^:]*:152: Error: r15 not allowed here -- `ldrh.w pc,\[r0,r1,LSL#1\]'
-[^:]*:154: Error: r15 not allowed here -- `ldrh.w r2,\[r0,pc,LSL#1\]'
+[^:]*:152: Error: r15 not allowed here -- `ldrh.w pc,\[r0,r1,LSL ?#1\]'
+[^:]*:154: Error: r15 not allowed here -- `ldrh.w r2,\[r0,pc,LSL ?#1\]'
[^:]*:158: Error: r15 not allowed here -- `ldrht pc,\[r0,#4\]'
[^:]*:162: Error: r15 not allowed here -- `ldrsb pc,\[r0,#4\]'
[^:]*:165: Error: r15 not allowed here -- `ldrsb pc,\[r0,#-4\]'
@@ -196,8 +196,8 @@
[^:]*:179: Error: r15 not allowed here -- `ldrsb pc,\[r0,r1\]'
[^:]*:180: Error: cannot use register index with PC-relative addressing -- `ldrsb r0,\[pc,r1\]'
[^:]*:181: Error: r15 not allowed here -- `ldrsb r0,\[r1,pc\]'
-[^:]*:182: Error: r15 not allowed here -- `ldrsb.w pc,\[r0,r1,LSL#2\]'
-[^:]*:185: Error: r15 not allowed here -- `ldrsb.w r2,\[r0,pc,LSL#2\]'
+[^:]*:182: Error: r15 not allowed here -- `ldrsb.w pc,\[r0,r1,LSL ?#2\]'
+[^:]*:185: Error: r15 not allowed here -- `ldrsb.w r2,\[r0,pc,LSL ?#2\]'
[^:]*:190: Error: r15 not allowed here -- `ldrsbt pc,\[r0,#4\]'
[^:]*:195: Error: r15 not allowed here -- `ldrsh pc,\[r0,#4\]'
[^:]*:197: Error: r15 not allowed here -- `ldrsh pc,\[r0,#-4\]'
@@ -207,8 +207,8 @@
[^:]*:210: Error: r15 not allowed here -- `ldrsh pc,\[r0,r1\]'
[^:]*:211: Error: cannot use register index with PC-relative addressing -- `ldrsh r0,\[pc,r1\]'
[^:]*:212: Error: r15 not allowed here -- `ldrsh r0,\[r1,pc\]'
-[^:]*:214: Error: r15 not allowed here -- `ldrsh.w pc,\[r0,r1,LSL#3\]'
-[^:]*:217: Error: r15 not allowed here -- `ldrsh.w r0,\[r1,pc,LSL#3\]'
+[^:]*:214: Error: r15 not allowed here -- `ldrsh.w pc,\[r0,r1,LSL ?#3\]'
+[^:]*:217: Error: r15 not allowed here -- `ldrsh.w r0,\[r1,pc,LSL ?#3\]'
[^:]*:221: Error: r15 not allowed here -- `ldrsht pc,\[r0,#4\]'
[^:]*:226: Error: r15 not allowed here -- `ldrt pc,\[r0,#4\]'
[^:]*:232: Error: r15 not allowed here -- `str pc,\[r0,#4\]'
@@ -217,7 +217,7 @@
[^:]*:235: Error: cannot use post-indexing with PC-relative addressing -- `str r0,\[pc\],#4'
[^:]*:236: Error: cannot use writeback with PC-relative addressing -- `str r0,\[pc,#4\]!'
[^:]*:239: Error: cannot use register index with PC-relative addressing -- `str.w r0,\[pc,r1\]'
-[^:]*:240: Error: cannot use register index with PC-relative addressing -- `str.w r0,\[pc,r1,LSL#2\]'
+[^:]*:240: Error: cannot use register index with PC-relative addressing -- `str.w r0,\[pc,r1,LSL ?#2\]'
[^:]*:246: Error: cannot use register index with PC-relative addressing -- `strb.w r0,\[pc,#4\]'
[^:]*:247: Error: r15 not allowed here -- `strb.w pc,\[r0,#4\]'
[^:]*:249: Error: cannot use register index with PC-relative addressing -- `strb r0,\[pc,#-4\]'
@@ -227,11 +227,11 @@
[^:]*:253: Error: r15 not allowed here -- `strb pc,\[r0\],#4'
[^:]*:254: Error: r15 not allowed here -- `strb pc,\[r0,#4\]!'
[^:]*:260: Error: cannot use register index with PC-relative addressing -- `strb.w r0,\[pc,r1\]'
-[^:]*:261: Error: cannot use register index with PC-relative addressing -- `strb.w r0,\[pc,r1,LSL#2\]'
+[^:]*:261: Error: cannot use register index with PC-relative addressing -- `strb.w r0,\[pc,r1,LSL ?#2\]'
[^:]*:262: Error: r15 not allowed here -- `strb.w pc,\[r0,r1\]'
-[^:]*:263: Error: r15 not allowed here -- `strb.w pc,\[r0,r1,LSL#2\]'
+[^:]*:263: Error: r15 not allowed here -- `strb.w pc,\[r0,r1,LSL ?#2\]'
[^:]*:266: Error: r15 not allowed here -- `strb.w r0,\[r1,pc\]'
-[^:]*:267: Error: r15 not allowed here -- `strb.w r0,\[r1,pc,LSL#2\]'
+[^:]*:267: Error: r15 not allowed here -- `strb.w r0,\[r1,pc,LSL ?#2\]'
[^:]*:272: Error: cannot use register index with PC-relative addressing -- `strbt r0,\[pc,#4\]'
[^:]*:273: Error: r15 not allowed here -- `strbt pc,\[r0,#4\]'
[^:]*:277: Error: cannot use register index with PC-relative addressing -- `strd r0,r1,\[pc,#4\]'
@@ -265,7 +265,7 @@
[^:]*:335: Error: cannot use post-indexing with PC-relative addressing -- `strh r0,\[pc\],#4'
[^:]*:336: Error: cannot use writeback with PC-relative addressing -- `strh r0,\[pc,#4\]!'
[^:]*:339: Error: cannot use register index with PC-relative addressing -- `strh.w r0,\[pc,r1\]'
-[^:]*:340: Error: cannot use register index with PC-relative addressing -- `strh.w r0,\[pc,r1,LSL#2\]'
+[^:]*:340: Error: cannot use register index with PC-relative addressing -- `strh.w r0,\[pc,r1,LSL ?#2\]'
[^:]*:341: Error: r15 not allowed here -- `strh.w pc,\[r0,#4\]'
[^:]*:342: Error: r15 not allowed here -- `strh.w pc,\[r0\]'
[^:]*:345: Error: r15 not allowed here -- `strh pc,\[r0,#-4\]'
@@ -273,8 +273,8 @@
[^:]*:347: Error: r15 not allowed here -- `strh pc,\[r0,#4\]!'
[^:]*:351: Error: r15 not allowed here -- `strh.w pc,\[r0,r1\]'
[^:]*:353: Error: r15 not allowed here -- `strh.w r0,\[r1,pc\]'
-[^:]*:355: Error: r15 not allowed here -- `strh.w pc,\[r0,r1,LSL#2\]'
-[^:]*:357: Error: r15 not allowed here -- `strh.w r0,\[r1,pc,LSL#2\]'
+[^:]*:355: Error: r15 not allowed here -- `strh.w pc,\[r0,r1,LSL ?#2\]'
+[^:]*:357: Error: r15 not allowed here -- `strh.w r0,\[r1,pc,LSL ?#2\]'
[^:]*:361: Error: cannot use register index with PC-relative addressing -- `strht r0,\[pc,#4\]'
[^:]*:362: Error: r15 not allowed here -- `strht pc,\[r0,#4\]'
[^:]*:363: Error: cannot use register index with PC-relative addressing -- `strht sp,\[pc,#4\]'
--- a/gas/testsuite/gas/arm/sp-pc-validations-bad-t.l
+++ b/gas/testsuite/gas/arm/sp-pc-validations-bad-t.l
@@ -41,7 +41,7 @@
[^:]*:12: Error: branch must be last instruction in IT block -- `ldreq.w r15,\[r0,r1\]'
[^:]*:21: *Info: macro .*
[^:]*:44: *Info: macro .*
-[^:]*:12: Error: branch must be last instruction in IT block -- `ldreq.w r15,\[r0,r1,LSL#2\]'
+[^:]*:12: Error: branch must be last instruction in IT block -- `ldreq.w r15,\[r0,r1,LSL ?#2\]'
[^:]*:21: *Info: macro .*
[^:]*:45: *Info: macro .*
[^:]*:48: Error: r15 not allowed here -- `ldrb pc,\[r0,#4\]'
@@ -59,10 +59,10 @@
[^:]*:66: Error: r15 not allowed here -- `ldrb pc,\[r0,r1\]'
[^:]*:67: Error: cannot use register index with PC-relative addressing -- `ldrb r0,\[pc,r1\]'
[^:]*:68: Error: r15 not allowed here -- `ldrb r0,\[r1,pc\]'
-[^:]*:69: Error: r15 not allowed here -- `ldrb.w pc,\[r0,r1,LSL#1\]'
+[^:]*:69: Error: r15 not allowed here -- `ldrb.w pc,\[r0,r1,LSL ?#1\]'
[^:]*:70: Error: r13 not allowed here -- `ldrb.w sp,\[r0,r1\]'
-[^:]*:71: Error: r15 not allowed here -- `ldrb.w r2,\[r0,pc,LSL#2\]'
-[^:]*:72: Error: r13 not allowed here -- `ldrb.w r2,\[r0,sp,LSL#2\]'
+[^:]*:71: Error: r15 not allowed here -- `ldrb.w r2,\[r0,pc,LSL ?#2\]'
+[^:]*:72: Error: r13 not allowed here -- `ldrb.w r2,\[r0,sp,LSL ?#2\]'
[^:]*:75: Error: r15 not allowed here -- `ldrbt pc,\[r0,#4\]'
[^:]*:76: Error: r13 not allowed here -- `ldrbt sp,\[r0,#4\]'
[^:]*:79: Error: r15 not allowed here -- `ldrd pc,r0,\[r1\]'
@@ -123,10 +123,10 @@
[^:]*:149: Error: r15 not allowed here -- `ldrh pc,\[r0,r1\]'
[^:]*:150: Error: cannot use register index with PC-relative addressing -- `ldrh r0,\[pc,r1\]'
[^:]*:151: Error: r15 not allowed here -- `ldrh r0,\[r1,pc\]'
-[^:]*:152: Error: r15 not allowed here -- `ldrh.w pc,\[r0,r1,LSL#1\]'
-[^:]*:153: Error: r13 not allowed here -- `ldrh.w sp,\[r0,r1,LSL#1\]'
-[^:]*:154: Error: r15 not allowed here -- `ldrh.w r2,\[r0,pc,LSL#1\]'
-[^:]*:155: Error: r13 not allowed here -- `ldrh.w r2,\[r0,sp,LSL#1\]'
+[^:]*:152: Error: r15 not allowed here -- `ldrh.w pc,\[r0,r1,LSL ?#1\]'
+[^:]*:153: Error: r13 not allowed here -- `ldrh.w sp,\[r0,r1,LSL ?#1\]'
+[^:]*:154: Error: r15 not allowed here -- `ldrh.w r2,\[r0,pc,LSL ?#1\]'
+[^:]*:155: Error: r13 not allowed here -- `ldrh.w r2,\[r0,sp,LSL ?#1\]'
[^:]*:158: Error: r15 not allowed here -- `ldrht pc,\[r0,#4\]'
[^:]*:159: Error: r13 not allowed here -- `ldrht sp,\[r0,#4\]'
[^:]*:162: Error: r15 not allowed here -- `ldrsb pc,\[r0,#4\]'
@@ -144,10 +144,10 @@
[^:]*:179: Error: r15 not allowed here -- `ldrsb pc,\[r0,r1\]'
[^:]*:180: Error: cannot use register index with PC-relative addressing -- `ldrsb r0,\[pc,r1\]'
[^:]*:181: Error: r15 not allowed here -- `ldrsb r0,\[r1,pc\]'
-[^:]*:182: Error: r15 not allowed here -- `ldrsb.w pc,\[r0,r1,LSL#2\]'
-[^:]*:184: Error: r13 not allowed here -- `ldrsb.w sp,\[r0,r1,LSL#2\]'
-[^:]*:185: Error: r15 not allowed here -- `ldrsb.w r2,\[r0,pc,LSL#2\]'
-[^:]*:186: Error: r13 not allowed here -- `ldrsb.w r2,\[r0,sp,LSL#2\]'
+[^:]*:182: Error: r15 not allowed here -- `ldrsb.w pc,\[r0,r1,LSL ?#2\]'
+[^:]*:184: Error: r13 not allowed here -- `ldrsb.w sp,\[r0,r1,LSL ?#2\]'
+[^:]*:185: Error: r15 not allowed here -- `ldrsb.w r2,\[r0,pc,LSL ?#2\]'
+[^:]*:186: Error: r13 not allowed here -- `ldrsb.w r2,\[r0,sp,LSL ?#2\]'
[^:]*:190: Error: r15 not allowed here -- `ldrsbt pc,\[r0,#4\]'
[^:]*:191: Error: r13 not allowed here -- `ldrsbt sp,\[r0,#4\]'
[^:]*:195: Error: r15 not allowed here -- `ldrsh pc,\[r0,#4\]'
@@ -164,10 +164,10 @@
[^:]*:210: Error: r15 not allowed here -- `ldrsh pc,\[r0,r1\]'
[^:]*:211: Error: cannot use register index with PC-relative addressing -- `ldrsh r0,\[pc,r1\]'
[^:]*:212: Error: r15 not allowed here -- `ldrsh r0,\[r1,pc\]'
-[^:]*:214: Error: r15 not allowed here -- `ldrsh.w pc,\[r0,r1,LSL#3\]'
-[^:]*:215: Error: r13 not allowed here -- `ldrsh.w sp,\[r0,r1,LSL#3\]'
-[^:]*:216: Error: r13 not allowed here -- `ldrsh.w r0,\[r1,sp,LSL#3\]'
-[^:]*:217: Error: r15 not allowed here -- `ldrsh.w r0,\[r1,pc,LSL#3\]'
+[^:]*:214: Error: r15 not allowed here -- `ldrsh.w pc,\[r0,r1,LSL ?#3\]'
+[^:]*:215: Error: r13 not allowed here -- `ldrsh.w sp,\[r0,r1,LSL ?#3\]'
+[^:]*:216: Error: r13 not allowed here -- `ldrsh.w r0,\[r1,sp,LSL ?#3\]'
+[^:]*:217: Error: r15 not allowed here -- `ldrsh.w r0,\[r1,pc,LSL ?#3\]'
[^:]*:221: Error: r15 not allowed here -- `ldrsht pc,\[r0,#4\]'
[^:]*:222: Error: r13 not allowed here -- `ldrsht sp,\[r0,#4\]'
[^:]*:226: Error: r15 not allowed here -- `ldrt pc,\[r0,#4\]'
@@ -178,7 +178,7 @@
[^:]*:235: Error: cannot use post-indexing with PC-relative addressing -- `str r0,\[pc\],#4'
[^:]*:236: Error: cannot use writeback with PC-relative addressing -- `str r0,\[pc,#4\]!'
[^:]*:239: Error: cannot use register index with PC-relative addressing -- `str.w r0,\[pc,r1\]'
-[^:]*:240: Error: cannot use register index with PC-relative addressing -- `str.w r0,\[pc,r1,LSL#2\]'
+[^:]*:240: Error: cannot use register index with PC-relative addressing -- `str.w r0,\[pc,r1,LSL ?#2\]'
[^:]*:246: Error: cannot use register index with PC-relative addressing -- `strb.w r0,\[pc,#4\]'
[^:]*:247: Error: r15 not allowed here -- `strb.w pc,\[r0,#4\]'
[^:]*:248: Error: r13 not allowed here -- `strb.w sp,\[r0,#4\]'
@@ -192,15 +192,15 @@
[^:]*:256: Error: r13 not allowed here -- `strb sp,\[r0\],#4'
[^:]*:257: Error: r13 not allowed here -- `strb sp,\[r0,#4\]!'
[^:]*:260: Error: cannot use register index with PC-relative addressing -- `strb.w r0,\[pc,r1\]'
-[^:]*:261: Error: cannot use register index with PC-relative addressing -- `strb.w r0,\[pc,r1,LSL#2\]'
+[^:]*:261: Error: cannot use register index with PC-relative addressing -- `strb.w r0,\[pc,r1,LSL ?#2\]'
[^:]*:262: Error: r15 not allowed here -- `strb.w pc,\[r0,r1\]'
-[^:]*:263: Error: r15 not allowed here -- `strb.w pc,\[r0,r1,LSL#2\]'
+[^:]*:263: Error: r15 not allowed here -- `strb.w pc,\[r0,r1,LSL ?#2\]'
[^:]*:264: Error: r13 not allowed here -- `strb.w sp,\[r0,r1\]'
-[^:]*:265: Error: r13 not allowed here -- `strb.w sp,\[r0,r1,LSL#2\]'
+[^:]*:265: Error: r13 not allowed here -- `strb.w sp,\[r0,r1,LSL ?#2\]'
[^:]*:266: Error: r15 not allowed here -- `strb.w r0,\[r1,pc\]'
-[^:]*:267: Error: r15 not allowed here -- `strb.w r0,\[r1,pc,LSL#2\]'
+[^:]*:267: Error: r15 not allowed here -- `strb.w r0,\[r1,pc,LSL ?#2\]'
[^:]*:268: Error: r13 not allowed here -- `strb.w r0,\[r1,sp\]'
-[^:]*:269: Error: r13 not allowed here -- `strb.w r0,\[r1,sp,LSL#2\]'
+[^:]*:269: Error: r13 not allowed here -- `strb.w r0,\[r1,sp,LSL ?#2\]'
[^:]*:272: Error: cannot use register index with PC-relative addressing -- `strbt r0,\[pc,#4\]'
[^:]*:273: Error: r15 not allowed here -- `strbt pc,\[r0,#4\]'
[^:]*:274: Error: r13 not allowed here -- `strbt sp,\[r0,#4\]'
@@ -252,7 +252,7 @@
[^:]*:335: Error: cannot use post-indexing with PC-relative addressing -- `strh r0,\[pc\],#4'
[^:]*:336: Error: cannot use writeback with PC-relative addressing -- `strh r0,\[pc,#4\]!'
[^:]*:339: Error: cannot use register index with PC-relative addressing -- `strh.w r0,\[pc,r1\]'
-[^:]*:340: Error: cannot use register index with PC-relative addressing -- `strh.w r0,\[pc,r1,LSL#2\]'
+[^:]*:340: Error: cannot use register index with PC-relative addressing -- `strh.w r0,\[pc,r1,LSL ?#2\]'
[^:]*:341: Error: r15 not allowed here -- `strh.w pc,\[r0,#4\]'
[^:]*:342: Error: r15 not allowed here -- `strh.w pc,\[r0\]'
[^:]*:343: Error: r13 not allowed here -- `strh.w sp,\[r0,#4\]'
@@ -267,10 +267,10 @@
[^:]*:352: Error: r13 not allowed here -- `strh.w sp,\[r0,r1\]'
[^:]*:353: Error: r15 not allowed here -- `strh.w r0,\[r1,pc\]'
[^:]*:354: Error: r13 not allowed here -- `strh.w r0,\[r1,sp\]'
-[^:]*:355: Error: r15 not allowed here -- `strh.w pc,\[r0,r1,LSL#2\]'
-[^:]*:356: Error: r13 not allowed here -- `strh.w sp,\[r0,r1,LSL#2\]'
-[^:]*:357: Error: r15 not allowed here -- `strh.w r0,\[r1,pc,LSL#2\]'
-[^:]*:358: Error: r13 not allowed here -- `strh.w r0,\[r1,sp,LSL#2\]'
+[^:]*:355: Error: r15 not allowed here -- `strh.w pc,\[r0,r1,LSL ?#2\]'
+[^:]*:356: Error: r13 not allowed here -- `strh.w sp,\[r0,r1,LSL ?#2\]'
+[^:]*:357: Error: r15 not allowed here -- `strh.w r0,\[r1,pc,LSL ?#2\]'
+[^:]*:358: Error: r13 not allowed here -- `strh.w r0,\[r1,sp,LSL ?#2\]'
[^:]*:361: Error: cannot use register index with PC-relative addressing -- `strht r0,\[pc,#4\]'
[^:]*:362: Error: r15 not allowed here -- `strht pc,\[r0,#4\]'
[^:]*:363: Error: r13 not allowed here -- `strht sp,\[pc,#4\]'
--- a/gas/testsuite/gas/arm/sp-pc-validations-bad.l
+++ b/gas/testsuite/gas/arm/sp-pc-validations-bad.l
@@ -1,27 +1,27 @@
[^:]*: Assembler messages:
-[^:]*:11: Error: cannot use register index with PC-relative addressing -- `ldr r0,\[r1,pc,LSL#2\]'
-[^:]*:12: Error: cannot use register index with PC-relative addressing -- `ldr r0,\[r1,pc,LSL#2\]!'
-[^:]*:13: Error: cannot use register index with PC-relative addressing -- `ldr r0,\[r1\],pc,LSL#2'
-[^:]*:14: Error: cannot use register index with PC-relative addressing -- `ldr r0,\[pc,r1,LSL#2\]!'
-[^:]*:15: Error: cannot use register index with PC-relative addressing -- `ldr r0,\[pc\],r1,LSL#2'
+[^:]*:11: Error: cannot use register index with PC-relative addressing -- `ldr r0,\[r1,pc,LSL ?#2\]'
+[^:]*:12: Error: cannot use register index with PC-relative addressing -- `ldr r0,\[r1,pc,LSL ?#2\]!'
+[^:]*:13: Error: cannot use register index with PC-relative addressing -- `ldr r0,\[r1\],pc,LSL ?#2'
+[^:]*:14: Error: cannot use register index with PC-relative addressing -- `ldr r0,\[pc,r1,LSL ?#2\]!'
+[^:]*:15: Error: cannot use register index with PC-relative addressing -- `ldr r0,\[pc\],r1,LSL ?#2'
[^:]*:18: Error: r15 not allowed here -- `ldrb pc,\[r0,#4\]'
[^:]*:19: Error: r15 not allowed here -- `ldrb pc,\[r0\],#4'
[^:]*:20: Error: r15 not allowed here -- `ldrb pc,\[r0,#4\]!'
[^:]*:23: Error: r15 not allowed here -- `ldrb pc,label'
[^:]*:24: Error: r15 not allowed here -- `ldrb pc,\[pc,#-0\]'
-[^:]*:27: Error: r15 not allowed here -- `ldrb pc,\[r0,r1,LSL#2\]'
-[^:]*:28: Error: r15 not allowed here -- `ldrb pc,\[r0,r1,LSL#2\]!'
-[^:]*:29: Error: r15 not allowed here -- `ldrb pc,\[r0\],r1,LSL#2'
-[^:]*:30: Error: cannot use register index with PC-relative addressing -- `ldrb r0,\[r1,pc,LSL#2\]'
-[^:]*:31: Error: cannot use register index with PC-relative addressing -- `ldrb r0,\[r1,pc,LSL#2\]!'
-[^:]*:32: Error: cannot use register index with PC-relative addressing -- `ldrb r0,\[r1\],pc,LSL#2'
-[^:]*:33: Error: cannot use register index with PC-relative addressing -- `ldrb r0,\[pc,r1,LSL#2\]!'
-[^:]*:34: Error: cannot use register index with PC-relative addressing -- `ldrb r0,\[pc\],r1,LSL#2'
+[^:]*:27: Error: r15 not allowed here -- `ldrb pc,\[r0,r1,LSL ?#2\]'
+[^:]*:28: Error: r15 not allowed here -- `ldrb pc,\[r0,r1,LSL ?#2\]!'
+[^:]*:29: Error: r15 not allowed here -- `ldrb pc,\[r0\],r1,LSL ?#2'
+[^:]*:30: Error: cannot use register index with PC-relative addressing -- `ldrb r0,\[r1,pc,LSL ?#2\]'
+[^:]*:31: Error: cannot use register index with PC-relative addressing -- `ldrb r0,\[r1,pc,LSL ?#2\]!'
+[^:]*:32: Error: cannot use register index with PC-relative addressing -- `ldrb r0,\[r1\],pc,LSL ?#2'
+[^:]*:33: Error: cannot use register index with PC-relative addressing -- `ldrb r0,\[pc,r1,LSL ?#2\]!'
+[^:]*:34: Error: cannot use register index with PC-relative addressing -- `ldrb r0,\[pc\],r1,LSL ?#2'
[^:]*:37: Error: r15 not allowed here -- `ldrbt pc,\[r0\],#4'
[^:]*:38: Error: cannot use register index with PC-relative addressing -- `ldrbt r0,\[pc\],#4'
-[^:]*:39: Error: r15 not allowed here -- `ldrbt pc,\[r0\],r1,LSL#4'
-[^:]*:40: Error: cannot use register index with PC-relative addressing -- `ldrbt r0,\[pc\],r1,LSL#4'
-[^:]*:41: Error: cannot use register index with PC-relative addressing -- `ldrbt r0,\[r1\],pc,LSL#4'
+[^:]*:39: Error: r15 not allowed here -- `ldrbt pc,\[r0\],r1,LSL ?#4'
+[^:]*:40: Error: cannot use register index with PC-relative addressing -- `ldrbt r0,\[pc\],r1,LSL ?#4'
+[^:]*:41: Error: cannot use register index with PC-relative addressing -- `ldrbt r0,\[r1\],pc,LSL ?#4'
[^:]*:44: Error: r15 not allowed here -- `ldrd r0,pc,\[r1,#4\]'
[^:]*:45: Error: r15 not allowed here -- `ldrd r0,pc,\[r1\],#4'
[^:]*:46: Error: r15 not allowed here -- `ldrd r0,pc,\[r1,#4\]!'
@@ -98,32 +98,32 @@
[^:]*:153: Error: cannot use register index with PC-relative addressing -- `ldrsht r0,\[r1\],pc'
[^:]*:156: Error: r15 not allowed here -- `ldrt pc,\[r0\],#4'
[^:]*:157: Error: cannot use register index with PC-relative addressing -- `ldrt r0,\[pc\],#4'
-[^:]*:158: Error: r15 not allowed here -- `ldrt pc,\[r0\],r1,LSL#4'
-[^:]*:159: Error: cannot use register index with PC-relative addressing -- `ldrt r0,\[pc\],r1,LSL#4'
-[^:]*:160: Error: cannot use register index with PC-relative addressing -- `ldrt r0,\[r1\],pc,LSL#4'
+[^:]*:158: Error: r15 not allowed here -- `ldrt pc,\[r0\],r1,LSL ?#4'
+[^:]*:159: Error: cannot use register index with PC-relative addressing -- `ldrt r0,\[pc\],r1,LSL ?#4'
+[^:]*:160: Error: cannot use register index with PC-relative addressing -- `ldrt r0,\[r1\],pc,LSL ?#4'
[^:]*:166: Error: cannot use register index with PC-relative addressing -- `str r0,\[pc\],#4'
[^:]*:167: Error: cannot use register index with PC-relative addressing -- `str r0,\[pc,#4\]!'
-[^:]*:170: Error: cannot use register index with PC-relative addressing -- `str r0,\[r1,pc,LSL#4\]'
-[^:]*:171: Error: cannot use register index with PC-relative addressing -- `str r0,\[r1,pc,LSL#4\]!'
-[^:]*:172: Error: cannot use register index with PC-relative addressing -- `str r0,\[r1\],pc,LSL#4'
+[^:]*:170: Error: cannot use register index with PC-relative addressing -- `str r0,\[r1,pc,LSL ?#4\]'
+[^:]*:171: Error: cannot use register index with PC-relative addressing -- `str r0,\[r1,pc,LSL ?#4\]!'
+[^:]*:172: Error: cannot use register index with PC-relative addressing -- `str r0,\[r1\],pc,LSL ?#4'
[^:]*:175: Error: r15 not allowed here -- `strb pc,\[r0,#4\]'
[^:]*:176: Error: r15 not allowed here -- `strb pc,\[r0\],#4'
[^:]*:177: Error: r15 not allowed here -- `strb pc,\[r0,#4\]!'
[^:]*:178: Error: cannot use register index with PC-relative addressing -- `strb r0,\[pc\],#4'
[^:]*:179: Error: cannot use register index with PC-relative addressing -- `strb r0,\[pc,#4\]!'
-[^:]*:182: Error: r15 not allowed here -- `strb pc,\[r0,r1,LSL#4\]'
-[^:]*:183: Error: r15 not allowed here -- `strb pc,\[r0,r1,LSL#4\]!'
-[^:]*:184: Error: r15 not allowed here -- `strb pc,\[r0\],r1,LSL#4'
-[^:]*:185: Error: cannot use register index with PC-relative addressing -- `strb r1,\[r0,pc,LSL#4\]'
-[^:]*:186: Error: cannot use register index with PC-relative addressing -- `strb r1,\[r0,pc,LSL#4\]!'
-[^:]*:187: Error: cannot use register index with PC-relative addressing -- `strb r1,\[r0\],pc,LSL#4'
-[^:]*:188: Error: cannot use register index with PC-relative addressing -- `strb r0,\[pc,r1,LSL#4\]!'
-[^:]*:189: Error: cannot use register index with PC-relative addressing -- `strb r0,\[pc\],r1,LSL#4'
+[^:]*:182: Error: r15 not allowed here -- `strb pc,\[r0,r1,LSL ?#4\]'
+[^:]*:183: Error: r15 not allowed here -- `strb pc,\[r0,r1,LSL ?#4\]!'
+[^:]*:184: Error: r15 not allowed here -- `strb pc,\[r0\],r1,LSL ?#4'
+[^:]*:185: Error: cannot use register index with PC-relative addressing -- `strb r1,\[r0,pc,LSL ?#4\]'
+[^:]*:186: Error: cannot use register index with PC-relative addressing -- `strb r1,\[r0,pc,LSL ?#4\]!'
+[^:]*:187: Error: cannot use register index with PC-relative addressing -- `strb r1,\[r0\],pc,LSL ?#4'
+[^:]*:188: Error: cannot use register index with PC-relative addressing -- `strb r0,\[pc,r1,LSL ?#4\]!'
+[^:]*:189: Error: cannot use register index with PC-relative addressing -- `strb r0,\[pc\],r1,LSL ?#4'
[^:]*:192: Error: r15 not allowed here -- `strbt pc,\[r0\],#4'
[^:]*:193: Error: cannot use register index with PC-relative addressing -- `strbt r0,\[pc\],#4'
-[^:]*:194: Error: r15 not allowed here -- `strbt pc,\[r0\],r1,LSL#4'
-[^:]*:195: Error: cannot use register index with PC-relative addressing -- `strbt r0,\[pc\],r1,LSL#4'
-[^:]*:196: Error: cannot use register index with PC-relative addressing -- `strbt r0,\[r1\],pc,LSL#4'
+[^:]*:194: Error: r15 not allowed here -- `strbt pc,\[r0\],r1,LSL ?#4'
+[^:]*:195: Error: cannot use register index with PC-relative addressing -- `strbt r0,\[pc\],r1,LSL ?#4'
+[^:]*:196: Error: cannot use register index with PC-relative addressing -- `strbt r0,\[r1\],pc,LSL ?#4'
[^:]*:199: Error: r15 not allowed here -- `strd r0,pc,\[r1,#4\]'
[^:]*:200: Error: r15 not allowed here -- `strd r0,pc,\[r1\],#4'
[^:]*:201: Error: r15 not allowed here -- `strd r0,pc,\[r1,#4\]!'
@@ -167,5 +167,5 @@
[^:]*:255: Error: cannot use register index with PC-relative addressing -- `strht r0,\[pc\],r1'
[^:]*:256: Error: cannot use register index with PC-relative addressing -- `strht r0,\[r1\],pc'
[^:]*:259: Error: cannot use register index with PC-relative addressing -- `strt r0,\[pc\],#4'
-[^:]*:260: Error: cannot use register index with PC-relative addressing -- `strt r0,\[pc\],r1,LSL#4'
-[^:]*:261: Error: cannot use register index with PC-relative addressing -- `strt r0,\[r1\],pc,LSL#4'
+[^:]*:260: Error: cannot use register index with PC-relative addressing -- `strt r0,\[pc\],r1,LSL ?#4'
+[^:]*:261: Error: cannot use register index with PC-relative addressing -- `strt r0,\[r1\],pc,LSL ?#4'
--- a/gas/testsuite/gas/arm/t16-bad.l
+++ b/gas/testsuite/gas/arm/t16-bad.l
@@ -7,7 +7,7 @@
[^:]*:36: *Info: macro .*
[^:]*:16: Error: unshifted register required -- `tst r0,#12'
[^:]*:36: *Info: macro .*
-[^:]*:17: Error: unshifted register required -- `tst r0,r1,lsl#2'
+[^:]*:17: Error: unshifted register required -- `tst r0,r1,lsl ?#2'
[^:]*:36: *Info: macro .*
[^:]*:18: Error: unshifted register required -- `tst r0,r1,lsl r3'
[^:]*:36: *Info: macro .*
@@ -19,7 +19,7 @@
[^:]*:37: *Info: macro .*
[^:]*:16: Error: unshifted register required -- `cmn r0,#12'
[^:]*:37: *Info: macro .*
-[^:]*:17: Error: unshifted register required -- `cmn r0,r1,lsl#2'
+[^:]*:17: Error: unshifted register required -- `cmn r0,r1,lsl ?#2'
[^:]*:37: *Info: macro .*
[^:]*:18: Error: unshifted register required -- `cmn r0,r1,lsl r3'
[^:]*:37: *Info: macro .*
@@ -31,7 +31,7 @@
[^:]*:38: *Info: macro .*
[^:]*:16: Error: unshifted register required -- `mvn r0,#12'
[^:]*:38: *Info: macro .*
-[^:]*:17: Error: unshifted register required -- `mvn r0,r1,lsl#2'
+[^:]*:17: Error: unshifted register required -- `mvn r0,r1,lsl ?#2'
[^:]*:38: *Info: macro .*
[^:]*:18: Error: unshifted register required -- `mvn r0,r1,lsl r3'
[^:]*:38: *Info: macro .*
@@ -57,7 +57,7 @@
[^:]*:12: Error: lo register required -- `sxtb r0,r8'
[^:]*:21: *Info: macro .*
[^:]*:43: *Info: macro .*
-[^:]*:22: Error: Thumb encoding does not support rotation -- `sxtb r0,r1,ror#8'
+[^:]*:22: Error: Thumb encoding does not support rotation -- `sxtb r0,r1,ror ?#8'
[^:]*:43: *Info: macro .*
[^:]*:11: Error: lo register required -- `sxth r8,r0'
[^:]*:21: *Info: macro .*
@@ -65,7 +65,7 @@
[^:]*:12: Error: lo register required -- `sxth r0,r8'
[^:]*:21: *Info: macro .*
[^:]*:44: *Info: macro .*
-[^:]*:22: Error: Thumb encoding does not support rotation -- `sxth r0,r1,ror#8'
+[^:]*:22: Error: Thumb encoding does not support rotation -- `sxth r0,r1,ror ?#8'
[^:]*:44: *Info: macro .*
[^:]*:11: Error: lo register required -- `uxtb r8,r0'
[^:]*:21: *Info: macro .*
@@ -73,7 +73,7 @@
[^:]*:12: Error: lo register required -- `uxtb r0,r8'
[^:]*:21: *Info: macro .*
[^:]*:45: *Info: macro .*
-[^:]*:22: Error: Thumb encoding does not support rotation -- `uxtb r0,r1,ror#8'
+[^:]*:22: Error: Thumb encoding does not support rotation -- `uxtb r0,r1,ror ?#8'
[^:]*:45: *Info: macro .*
[^:]*:11: Error: lo register required -- `uxth r8,r0'
[^:]*:21: *Info: macro .*
@@ -81,7 +81,7 @@
[^:]*:12: Error: lo register required -- `uxth r0,r8'
[^:]*:21: *Info: macro .*
[^:]*:46: *Info: macro .*
-[^:]*:22: Error: Thumb encoding does not support rotation -- `uxth r0,r1,ror#8'
+[^:]*:22: Error: Thumb encoding does not support rotation -- `uxth r0,r1,ror ?#8'
[^:]*:46: *Info: macro .*
[^:]*:25: Error: dest must overlap one source register -- `adc r1,r2,r3'
[^:]*:30: *Info: macro .*
@@ -94,7 +94,7 @@
[^:]*:48: *Info: macro .*
[^:]*:31: Error: unshifted register required -- `adc r0,#12'
[^:]*:48: *Info: macro .*
-[^:]*:32: Error: unshifted register required -- `adc r0,r1,lsl#2'
+[^:]*:32: Error: unshifted register required -- `adc r0,r1,lsl ?#2'
[^:]*:48: *Info: macro .*
[^:]*:33: Error: unshifted register required -- `adc r0,r1,lsl r3'
[^:]*:48: *Info: macro .*
@@ -109,7 +109,7 @@
[^:]*:49: *Info: macro .*
[^:]*:31: Error: unshifted register required -- `and r0,#12'
[^:]*:49: *Info: macro .*
-[^:]*:32: Error: unshifted register required -- `and r0,r1,lsl#2'
+[^:]*:32: Error: unshifted register required -- `and r0,r1,lsl ?#2'
[^:]*:49: *Info: macro .*
[^:]*:33: Error: unshifted register required -- `and r0,r1,lsl r3'
[^:]*:49: *Info: macro .*
@@ -124,7 +124,7 @@
[^:]*:50: *Info: macro .*
[^:]*:31: Error: unshifted register required -- `bic r0,#12'
[^:]*:50: *Info: macro .*
-[^:]*:32: Error: unshifted register required -- `bic r0,r1,lsl#2'
+[^:]*:32: Error: unshifted register required -- `bic r0,r1,lsl ?#2'
[^:]*:50: *Info: macro .*
[^:]*:33: Error: unshifted register required -- `bic r0,r1,lsl r3'
[^:]*:50: *Info: macro .*
@@ -139,7 +139,7 @@
[^:]*:51: *Info: macro .*
[^:]*:31: Error: unshifted register required -- `eor r0,#12'
[^:]*:51: *Info: macro .*
-[^:]*:32: Error: unshifted register required -- `eor r0,r1,lsl#2'
+[^:]*:32: Error: unshifted register required -- `eor r0,r1,lsl ?#2'
[^:]*:51: *Info: macro .*
[^:]*:33: Error: unshifted register required -- `eor r0,r1,lsl r3'
[^:]*:51: *Info: macro .*
@@ -154,7 +154,7 @@
[^:]*:52: *Info: macro .*
[^:]*:31: Error: unshifted register required -- `orr r0,#12'
[^:]*:52: *Info: macro .*
-[^:]*:32: Error: unshifted register required -- `orr r0,r1,lsl#2'
+[^:]*:32: Error: unshifted register required -- `orr r0,r1,lsl ?#2'
[^:]*:52: *Info: macro .*
[^:]*:33: Error: unshifted register required -- `orr r0,r1,lsl r3'
[^:]*:52: *Info: macro .*
@@ -169,7 +169,7 @@
[^:]*:53: *Info: macro .*
[^:]*:31: Error: unshifted register required -- `sbc r0,#12'
[^:]*:53: *Info: macro .*
-[^:]*:32: Error: unshifted register required -- `sbc r0,r1,lsl#2'
+[^:]*:32: Error: unshifted register required -- `sbc r0,r1,lsl ?#2'
[^:]*:53: *Info: macro .*
[^:]*:33: Error: unshifted register required -- `sbc r0,r1,lsl r3'
[^:]*:53: *Info: macro .*
@@ -220,7 +220,7 @@
[^:]*:60: *Info: macro .*
[^:]*:65: *Info: macro .*
[^:]*:66: Error: ror #imm not supported -- `ror r0,r1,#12'
-[^:]*:69: Error: unshifted register required -- `add r0,r1,lsl#2'
+[^:]*:69: Error: unshifted register required -- `add r0,r1,lsl ?#2'
[^:]*:70: Error: unshifted register required -- `add r0,r1,lsl r3'
[^:]*:71: Error: lo register required -- `add r8,r0,#1'
[^:]*:72: Error: lo register required -- `add r0,r8,#1'
@@ -236,7 +236,7 @@
[^:]*:27: Error: lo register required -- `sub r0,r8'
[^:]*:30: *Info: macro .*
[^:]*:80: *Info: macro .*
-[^:]*:32: Error: unshifted register required -- `sub r0,r1,lsl#2'
+[^:]*:32: Error: unshifted register required -- `sub r0,r1,lsl ?#2'
[^:]*:80: *Info: macro .*
[^:]*:33: Error: unshifted register required -- `sub r0,r1,lsl r3'
[^:]*:80: *Info: macro .*
@@ -246,10 +246,10 @@
[^:]*:84: Error: lo register required -- `sub r8,r1,r2'
[^:]*:85: Error: lo register required -- `sub r1,r8,r2'
[^:]*:86: Error: lo register required -- `sub r1,r2,r8'
-[^:]*:88: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `cmp r0,r1,lsl#2'
+[^:]*:88: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `cmp r0,r1,lsl ?#2'
[^:]*:89: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `cmp r0,r1,lsl r3'
[^:]*:90: Error: only lo regs allowed with immediate -- `cmp r8,#255'
-[^:]*:92: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `mov r0,r1,lsl#2'
+[^:]*:92: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `mov r0,r1,lsl ?#2'
[^:]*:93: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `mov r0,r1,lsl r3'
[^:]*:94: Error: only lo regs allowed with immediate -- `mov r8,#255'
[^:]*:98: Error: lo register required -- `ldr r8,\[r0\]'
@@ -364,8 +364,8 @@
[^:]*:113: *Info: macro .*
[^:]*:104: Error: Thumb does not support this addressing mode -- `strh r0,\[r1\],r2'
[^:]*:113: *Info: macro .*
-[^:]*:115: Error: Thumb does not support this addressing mode -- `ldr r0,\[r1,r2,lsl#1\]'
-[^:]*:116: Error: Thumb does not support this addressing mode -- `str r0,\[r1,r2,lsl#1\]'
+[^:]*:115: Error: Thumb does not support this addressing mode -- `ldr r0,\[r1,r2,lsl ?#1\]'
+[^:]*:116: Error: Thumb does not support this addressing mode -- `str r0,\[r1,r2,lsl ?#1\]'
[^:]*:119: Error: lo register required -- `ldmia r8!,{r1,r2}'
[^:]*:120: Error: lo register required -- `ldmia r7!,{r8}'
[^:]*:121: Warning: this instruction will write back the base register
--- a/gas/testsuite/gas/arm/thumb2_bad_reg.l
+++ b/gas/testsuite/gas/arm/thumb2_bad_reg.l
@@ -514,7 +514,7 @@
[^:]*:[0-9]+: Error: r15 not allowed here -- `ssat r15,#1,r0'
[^:]*:[0-9]+: Error: r13 not allowed here -- `ssat r0,#1,r13'
[^:]*:[0-9]+: Error: r15 not allowed here -- `ssat r0,#1,r15'
-[^:]*:[0-9]+: Error: shift expression is too large -- `ssat r1,#1,r3,asr#32'
+[^:]*:[0-9]+: Error: shift expression is too large -- `ssat r1,#1,r3,asr ?#32'
[^:]*:[0-9]+: Error: r13 not allowed here -- `ssat16 r13,#1,r0'
[^:]*:[0-9]+: Error: r15 not allowed here -- `ssat16 r15,#1,r0'
[^:]*:[0-9]+: Error: r13 not allowed here -- `ssat16 r0,#1,r13'
@@ -742,7 +742,7 @@
[^:]*:[0-9]+: Error: r15 not allowed here -- `usat r15,#1,r0'
[^:]*:[0-9]+: Error: r13 not allowed here -- `usat r0,#1,r13'
[^:]*:[0-9]+: Error: r15 not allowed here -- `usat r0,#1,r15'
-[^:]*:[0-9]+: Error: shift expression is too large -- `usat r1,#1,r3,asr#32'
+[^:]*:[0-9]+: Error: shift expression is too large -- `usat r1,#1,r3,asr ?#32'
[^:]*:[0-9]+: Error: r13 not allowed here -- `usat16 r13,#1,r0'
[^:]*:[0-9]+: Error: r15 not allowed here -- `usat16 r15,#1,r0'
[^:]*:[0-9]+: Error: r13 not allowed here -- `usat16 r0,#1,r13'
next prev parent reply other threads:[~2024-06-28 13:24 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-28 13:15 [PATCH 00/11] gas: scrubber adjustments Jan Beulich
2024-06-28 13:17 ` [PATCH 01/11] gas: there's no scrubber state 12 Jan Beulich
2024-06-28 13:17 ` [PATCH 02/11] gas: drop scrubber state -2 Jan Beulich
2024-06-28 13:18 ` [PATCH 03/11] gas: multi-byte warning adjustments Jan Beulich
2024-06-28 13:18 ` [PATCH 04/11] gas: don't open-code IS_WHITESPACE() / IS_NEWLINE() Jan Beulich
2024-06-28 13:19 ` [PATCH 05/11] gas: pre-init the scrubber's lex[] Jan Beulich
2024-07-01 1:45 ` Hans-Peter Nilsson
2024-07-01 6:02 ` Jan Beulich
2024-06-28 13:20 ` [PATCH 06/11] gas: re-work tic6x scrubber special case Jan Beulich
2024-06-28 13:22 ` [PATCH 07/11] gas: consistently drop trailing whitespace when scrubbing Jan Beulich
2024-06-28 13:53 ` Maciej W. Rozycki
2024-07-01 5:58 ` Jan Beulich
2024-07-01 11:05 ` Maciej W. Rozycki
2024-07-03 13:42 ` Michael Matz
2024-06-28 13:23 ` [PATCH 08/11] Arm: correct macro use in gas testsuite Jan Beulich
2024-06-28 13:24 ` Jan Beulich [this message]
2024-06-28 13:26 ` [PATCH 10/11] aarch64: relax gas testsuite whitespace expectations Jan Beulich
2024-06-28 13:31 ` [PATCH WIP/RFC 11/11] gas: have scrubber retain more whitespace Jan Beulich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=707a3cd8-9cc2-4900-a20f-58ac5b07eee3@suse.com \
--to=jbeulich@suse.com \
--cc=binutils@sourceware.org \
--cc=nickc@redhat.com \
--cc=ramana.radhakrishnan@arm.com \
--cc=rearnsha@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).