* Re: [patch] update zlib to the 1.2.10 release.
2017-01-12 21:39 ` Jeff Law
2017-01-13 12:14 ` Matthias Klose
@ 2017-01-22 18:01 ` Matthias Klose
2017-01-22 18:12 ` NightStrike
1 sibling, 1 reply; 13+ messages in thread
From: Matthias Klose @ 2017-01-22 18:01 UTC (permalink / raw)
To: Jeff Law, GCC Patches; +Cc: gdb-patches, binutils, NightStrike
[-- Attachment #1: Type: text/plain, Size: 1727 bytes --]
On 12.01.2017 22:39, Jeff Law wrote:
> On 01/12/2017 02:26 PM, Matthias Klose wrote:
>> On 12.01.2017 22:17, Jeff Law wrote:
>>> On 01/05/2017 07:45 AM, Matthias Klose wrote:
>>>> These are the changes updating zlib from 1.2.8 to 1.2.10. It is only used when
>>>> building without a system zlib. The new release includes fixes for security
>>>> issues CVE-2016-9840, CVE-2016-9841, CVE-2016-9842, CVE-2016-9843.
>>>>
>>>> Checked with a build with disabled system-zlib. Ok for the trunk?
>>> Were there any changes that we needed to carry forward or any changes you needed
>>> to make to the upstream sources?
>>
>> I backed out the changes to the configure* and Makefile* changes (and only
>> these), which are completely different to zlib upstream. There are no
>> additions/deletions to zlib source files, so these build changes still work with
>> the updated zlib.
> One more note. I think that, in general, backing out local changes which don't
> have a strong need to be carried forward is absolutely the right thing to do.
> The less hacking we do on these libraries we pull from other sources, the
> better, IMHO.
Committed the 1.2.10 changes on Jan 13. 1.2.11 was released a few days ago.
Updating the trunk with the new version, checked with a build without using a
system zlib.
NightStrike proposed to revert to the 1.2.8 release until zlib stabilizes again;
I'm open for that, but didn't want to stay with the 1.2.10 release.
Matthias
2017-01-22 Matthias Klose <doko@ubuntu.com>
* Import zlib 1.2.11.
* configure: Regenerate.
Changes in 1.2.11 (15 Jan 2017)
- Fix deflate stored bug when pulling last block from window
- Permit immediate deflateParams changes before any deflate input
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: zlib-1.2.11.diff --]
[-- Type: text/x-diff; name="zlib-1.2.11.diff", Size: 29167 bytes --]
Index: zlib/CMakeLists.txt
===================================================================
--- zlib/CMakeLists.txt (revision 244761)
+++ zlib/CMakeLists.txt (working copy)
@@ -3,7 +3,7 @@
project(zlib C)
-set(VERSION "1.2.10")
+set(VERSION "1.2.11")
option(ASM686 "Enable building i686 assembly implementation")
option(AMD64 "Enable building amd64 assembly implementation")
Index: zlib/ChangeLog
===================================================================
--- zlib/ChangeLog (revision 244761)
+++ zlib/ChangeLog (working copy)
@@ -1,6 +1,10 @@
ChangeLog file for zlib
+Changes in 1.2.11 (15 Jan 2017)
+- Fix deflate stored bug when pulling last block from window
+- Permit immediate deflateParams changes before any deflate input
+
Changes in 1.2.10 (2 Jan 2017)
- Avoid warnings on snprintf() return value
- Fix bug in deflate_stored() for zero-length input
Index: zlib/ChangeLog.gcj
===================================================================
--- zlib/ChangeLog.gcj (revision 244761)
+++ zlib/ChangeLog.gcj (working copy)
@@ -1,3 +1,8 @@
+2017-01-22 Matthias Klose <doko@ubuntu.com>
+
+ * Import zlib 1.2.11.
+ * configure: Regenerate.
+
2017-01-13 Matthias Klose <doko@ubuntu.com>
* Import zlib 1.2.10.
Index: zlib/README
===================================================================
--- zlib/README (revision 244761)
+++ zlib/README (working copy)
@@ -3,7 +3,7 @@
ZLIB DATA COMPRESSION LIBRARY
-zlib 1.2.10 is a general purpose data compression library. All the code is
+zlib 1.2.11 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://tools.ietf.org/html/rfc1950 (zlib format), rfc1951 (deflate format) and
@@ -34,7 +34,7 @@
issue of Dr. Dobb's Journal; a copy of the article is available at
http://marknelson.us/1997/01/01/zlib-engine/ .
-The changes made in version 1.2.10 are documented in the file ChangeLog.
+The changes made in version 1.2.11 are documented in the file ChangeLog.
Unsupported third party contributions are provided in directory contrib/ .
Index: zlib/contrib/delphi/ZLib.pas
===================================================================
--- zlib/contrib/delphi/ZLib.pas (revision 244761)
+++ zlib/contrib/delphi/ZLib.pas (working copy)
@@ -152,7 +152,7 @@
const OutBuf: Pointer; BufSize: Integer);
const
- zlib_version = '1.2.10';
+ zlib_version = '1.2.11';
type
EZlibError = class(Exception);
Index: zlib/contrib/dotzlib/DotZLib/UnitTests.cs
===================================================================
--- zlib/contrib/dotzlib/DotZLib/UnitTests.cs (revision 244761)
+++ zlib/contrib/dotzlib/DotZLib/UnitTests.cs (working copy)
@@ -156,7 +156,7 @@
public void Info_Version()
{
Info info = new Info();
- Assert.AreEqual("1.2.10", Info.Version);
+ Assert.AreEqual("1.2.11", Info.Version);
Assert.AreEqual(32, info.SizeOfUInt);
Assert.AreEqual(32, info.SizeOfULong);
Assert.AreEqual(32, info.SizeOfPointer);
Index: zlib/contrib/infback9/inftree9.c
===================================================================
--- zlib/contrib/infback9/inftree9.c (revision 244761)
+++ zlib/contrib/infback9/inftree9.c (working copy)
@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate9_copyright[] =
- " inflate9 1.2.10 Copyright 1995-2017 Mark Adler ";
+ " inflate9 1.2.11 Copyright 1995-2017 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -64,7 +64,7 @@
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
128, 128, 128, 128, 128, 128, 128, 128, 129, 129, 129, 129,
130, 130, 130, 130, 131, 131, 131, 131, 132, 132, 132, 132,
- 133, 133, 133, 133, 144, 192, 202};
+ 133, 133, 133, 133, 144, 77, 202};
static const unsigned short dbase[32] = { /* Distance codes 0..31 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49,
65, 97, 129, 193, 257, 385, 513, 769, 1025, 1537, 2049, 3073,
Index: zlib/contrib/minizip/configure.ac
===================================================================
--- zlib/contrib/minizip/configure.ac (revision 244761)
+++ zlib/contrib/minizip/configure.ac (working copy)
@@ -1,7 +1,7 @@
# -*- Autoconf -*-
# Process this file with autoconf to produce a configure script.
-AC_INIT([minizip], [1.2.10], [bugzilla.redhat.com])
+AC_INIT([minizip], [1.2.11], [bugzilla.redhat.com])
AC_CONFIG_SRCDIR([minizip.c])
AM_INIT_AUTOMAKE([foreign])
LT_INIT
Index: zlib/contrib/pascal/zlibpas.pas
===================================================================
--- zlib/contrib/pascal/zlibpas.pas (revision 244761)
+++ zlib/contrib/pascal/zlibpas.pas (working copy)
@@ -10,7 +10,7 @@
interface
const
- ZLIB_VERSION = '1.2.10';
+ ZLIB_VERSION = '1.2.11';
ZLIB_VERNUM = $12a0;
type
Index: zlib/contrib/vstudio/readme.txt
===================================================================
--- zlib/contrib/vstudio/readme.txt (revision 244761)
+++ zlib/contrib/vstudio/readme.txt (working copy)
@@ -1,4 +1,4 @@
-Building instructions for the DLL versions of Zlib 1.2.10
+Building instructions for the DLL versions of Zlib 1.2.11
========================================================
This directory contains projects that build zlib and minizip using
Index: zlib/contrib/vstudio/vc10/zlib.rc
===================================================================
--- zlib/contrib/vstudio/vc10/zlib.rc (revision 244761)
+++ zlib/contrib/vstudio/vc10/zlib.rc (working copy)
@@ -2,8 +2,8 @@
#define IDR_VERSION1 1
IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
- FILEVERSION 1, 2, 10, 0
- PRODUCTVERSION 1, 2, 10, 0
+ FILEVERSION 1, 2, 11, 0
+ PRODUCTVERSION 1, 2, 11, 0
FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
FILEFLAGS 0
FILEOS VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@
BEGIN
VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
- VALUE "FileVersion", "1.2.10\0"
+ VALUE "FileVersion", "1.2.11\0"
VALUE "InternalName", "zlib\0"
VALUE "OriginalFilename", "zlibwapi.dll\0"
VALUE "ProductName", "ZLib.DLL\0"
Index: zlib/contrib/vstudio/vc11/zlib.rc
===================================================================
--- zlib/contrib/vstudio/vc11/zlib.rc (revision 244761)
+++ zlib/contrib/vstudio/vc11/zlib.rc (working copy)
@@ -2,8 +2,8 @@
#define IDR_VERSION1 1
IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
- FILEVERSION 1, 2, 10, 0
- PRODUCTVERSION 1, 2, 10, 0
+ FILEVERSION 1, 2, 11, 0
+ PRODUCTVERSION 1, 2, 11, 0
FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
FILEFLAGS 0
FILEOS VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@
BEGIN
VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
- VALUE "FileVersion", "1.2.10\0"
+ VALUE "FileVersion", "1.2.11\0"
VALUE "InternalName", "zlib\0"
VALUE "OriginalFilename", "zlibwapi.dll\0"
VALUE "ProductName", "ZLib.DLL\0"
Index: zlib/contrib/vstudio/vc12/zlib.rc
===================================================================
--- zlib/contrib/vstudio/vc12/zlib.rc (revision 244761)
+++ zlib/contrib/vstudio/vc12/zlib.rc (working copy)
@@ -2,8 +2,8 @@
#define IDR_VERSION1 1
IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
- FILEVERSION 1, 2, 10, 0
- PRODUCTVERSION 1, 2, 10, 0
+ FILEVERSION 1, 2, 11, 0
+ PRODUCTVERSION 1, 2, 11, 0
FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
FILEFLAGS 0
FILEOS VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@
BEGIN
VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
- VALUE "FileVersion", "1.2.10\0"
+ VALUE "FileVersion", "1.2.11\0"
VALUE "InternalName", "zlib\0"
VALUE "OriginalFilename", "zlibwapi.dll\0"
VALUE "ProductName", "ZLib.DLL\0"
Index: zlib/contrib/vstudio/vc14/miniunz.vcxproj.user
===================================================================
--- zlib/contrib/vstudio/vc14/miniunz.vcxproj.user (revision 244761)
+++ zlib/contrib/vstudio/vc14/miniunz.vcxproj.user (nonexistent)
@@ -1,4 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
- <PropertyGroup />
-</Project>
\ No newline at end of file
Index: zlib/contrib/vstudio/vc14/minizip.vcxproj.user
===================================================================
--- zlib/contrib/vstudio/vc14/minizip.vcxproj.user (revision 244761)
+++ zlib/contrib/vstudio/vc14/minizip.vcxproj.user (nonexistent)
@@ -1,4 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
- <PropertyGroup />
-</Project>
\ No newline at end of file
Index: zlib/contrib/vstudio/vc14/testzlib.vcxproj.user
===================================================================
--- zlib/contrib/vstudio/vc14/testzlib.vcxproj.user (revision 244761)
+++ zlib/contrib/vstudio/vc14/testzlib.vcxproj.user (nonexistent)
@@ -1,4 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
- <PropertyGroup />
-</Project>
\ No newline at end of file
Index: zlib/contrib/vstudio/vc14/testzlibdll.vcxproj.user
===================================================================
--- zlib/contrib/vstudio/vc14/testzlibdll.vcxproj.user (revision 244761)
+++ zlib/contrib/vstudio/vc14/testzlibdll.vcxproj.user (nonexistent)
@@ -1,4 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
- <PropertyGroup />
-</Project>
\ No newline at end of file
Index: zlib/contrib/vstudio/vc14/zlib.rc
===================================================================
--- zlib/contrib/vstudio/vc14/zlib.rc (revision 244761)
+++ zlib/contrib/vstudio/vc14/zlib.rc (working copy)
@@ -2,8 +2,8 @@
#define IDR_VERSION1 1
IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
- FILEVERSION 1, 2, 10, 0
- PRODUCTVERSION 1, 2, 10, 0
+ FILEVERSION 1, 2, 11, 0
+ PRODUCTVERSION 1, 2, 11, 0
FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
FILEFLAGS 0
FILEOS VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@
BEGIN
VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
- VALUE "FileVersion", "1.2.10\0"
+ VALUE "FileVersion", "1.2.11\0"
VALUE "InternalName", "zlib\0"
VALUE "OriginalFilename", "zlibwapi.dll\0"
VALUE "ProductName", "ZLib.DLL\0"
Index: zlib/contrib/vstudio/vc14/zlibstat.vcxproj.user
===================================================================
--- zlib/contrib/vstudio/vc14/zlibstat.vcxproj.user (revision 244761)
+++ zlib/contrib/vstudio/vc14/zlibstat.vcxproj.user (nonexistent)
@@ -1,4 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
- <PropertyGroup />
-</Project>
\ No newline at end of file
Index: zlib/contrib/vstudio/vc14/zlibvc.vcxproj.user
===================================================================
--- zlib/contrib/vstudio/vc14/zlibvc.vcxproj.user (revision 244761)
+++ zlib/contrib/vstudio/vc14/zlibvc.vcxproj.user (nonexistent)
@@ -1,4 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<Project ToolsVersion="14.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
- <PropertyGroup />
-</Project>
\ No newline at end of file
Index: zlib/contrib/vstudio/vc9/zlib.rc
===================================================================
--- zlib/contrib/vstudio/vc9/zlib.rc (revision 244761)
+++ zlib/contrib/vstudio/vc9/zlib.rc (working copy)
@@ -2,8 +2,8 @@
#define IDR_VERSION1 1
IDR_VERSION1 VERSIONINFO MOVEABLE IMPURE LOADONCALL DISCARDABLE
- FILEVERSION 1, 2, 10, 0
- PRODUCTVERSION 1, 2, 10, 0
+ FILEVERSION 1, 2, 11, 0
+ PRODUCTVERSION 1, 2, 11, 0
FILEFLAGSMASK VS_FFI_FILEFLAGSMASK
FILEFLAGS 0
FILEOS VOS_DOS_WINDOWS32
@@ -17,7 +17,7 @@
BEGIN
VALUE "FileDescription", "zlib data compression and ZIP file I/O library\0"
- VALUE "FileVersion", "1.2.10\0"
+ VALUE "FileVersion", "1.2.11\0"
VALUE "InternalName", "zlib\0"
VALUE "OriginalFilename", "zlibwapi.dll\0"
VALUE "ProductName", "ZLib.DLL\0"
Index: zlib/deflate.c
===================================================================
--- zlib/deflate.c (revision 244761)
+++ zlib/deflate.c (working copy)
@@ -52,7 +52,7 @@
#include "deflate.h"
const char deflate_copyright[] =
- " deflate 1.2.10 Copyright 1995-2017 Jean-loup Gailly and Mark Adler ";
+ " deflate 1.2.11 Copyright 1995-2017 Jean-loup Gailly and Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -586,7 +586,8 @@
}
func = configuration_table[s->level].func;
- if ((strategy != s->strategy || func != configuration_table[level].func)) {
+ if ((strategy != s->strategy || func != configuration_table[level].func) &&
+ s->high_water) {
/* Flush the last buffer: */
int err = deflate(strm, Z_BLOCK);
if (err == Z_STREAM_ERROR)
@@ -1671,8 +1672,6 @@
len = left + s->strm->avail_in; /* limit len to the input */
if (len > have)
len = have; /* limit len to the output */
- if (left > len)
- left = len; /* limit window pull to len */
/* If the stored block would be less than min_block in length, or if
* unable to copy all of the available input when flushing, then try
@@ -1681,13 +1680,13 @@
*/
if (len < min_block && ((len == 0 && flush != Z_FINISH) ||
flush == Z_NO_FLUSH ||
- len - left != s->strm->avail_in))
+ len != left + s->strm->avail_in))
break;
/* Make a dummy stored block in pending to get the header bytes,
* including any pending bits. This also updates the debugging counts.
*/
- last = flush == Z_FINISH && len - left == s->strm->avail_in ? 1 : 0;
+ last = flush == Z_FINISH && len == left + s->strm->avail_in ? 1 : 0;
_tr_stored_block(s, (char *)0, 0L, last);
/* Replace the lengths in the dummy stored block with len. */
@@ -1699,8 +1698,8 @@
/* Write the stored block header bytes. */
flush_pending(s->strm);
+#ifdef ZLIB_DEBUG
/* Update debugging counts for the data about to be copied. */
-#ifdef ZLIB_DEBUG
s->compressed_len += len << 3;
s->bits_sent += len << 3;
#endif
@@ -1707,6 +1706,8 @@
/* Copy uncompressed bytes from the window to next_out. */
if (left) {
+ if (left > len)
+ left = len;
zmemcpy(s->strm->next_out, s->window + s->block_start, left);
s->strm->next_out += left;
s->strm->avail_out -= left;
@@ -1756,6 +1757,8 @@
s->block_start = s->strstart;
s->insert += MIN(used, s->w_size - s->insert);
}
+ if (s->high_water < s->strstart)
+ s->high_water = s->strstart;
/* If the last block was written to next_out, then done. */
if (last)
@@ -1783,6 +1786,8 @@
read_buf(s->strm, s->window + s->strstart, have);
s->strstart += have;
}
+ if (s->high_water < s->strstart)
+ s->high_water = s->strstart;
/* There was not enough avail_out to write a complete worthy or flushed
* stored block to next_out. Write a stored block to pending instead, if we
Index: zlib/gzlib.c
===================================================================
--- zlib/gzlib.c (revision 244761)
+++ zlib/gzlib.c (working copy)
@@ -1,5 +1,5 @@
/* gzlib.c -- zlib functions common to reading and writing gzip files
- * Copyright (C) 2004, 2010, 2011, 2012, 2013, 2016 Mark Adler
+ * Copyright (C) 2004-2017 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
Index: zlib/gzwrite.c
===================================================================
--- zlib/gzwrite.c (revision 244761)
+++ zlib/gzwrite.c (working copy)
@@ -1,5 +1,5 @@
/* gzwrite.c -- zlib functions for writing gzip files
- * Copyright (C) 2004, 2005, 2010, 2011, 2012, 2013, 2016 Mark Adler
+ * Copyright (C) 2004-2017 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
Index: zlib/inffast.c
===================================================================
--- zlib/inffast.c (revision 244761)
+++ zlib/inffast.c (working copy)
@@ -1,5 +1,5 @@
/* inffast.c -- fast decoding
- * Copyright (C) 1995-2008, 2010, 2013, 2016 Mark Adler
+ * Copyright (C) 1995-2017 Mark Adler
* For conditions of distribution and use, see copyright notice in zlib.h
*/
Index: zlib/inftrees.c
===================================================================
--- zlib/inftrees.c (revision 244761)
+++ zlib/inftrees.c (working copy)
@@ -9,7 +9,7 @@
#define MAXBITS 15
const char inflate_copyright[] =
- " inflate 1.2.10 Copyright 1995-2017 Mark Adler ";
+ " inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
/*
If you use the zlib library in a product, an acknowledgment is welcome
in the documentation of your product. If for some reason you cannot
@@ -62,7 +62,7 @@
35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
static const unsigned short lext[31] = { /* Length codes 257..285 extra */
16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
- 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 192, 202};
+ 19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
Index: zlib/os400/README400
===================================================================
--- zlib/os400/README400 (revision 244761)
+++ zlib/os400/README400 (working copy)
@@ -1,4 +1,4 @@
- ZLIB version 1.2.10 for OS/400 installation instructions
+ ZLIB version 1.2.11 for OS/400 installation instructions
1) Download and unpack the zlib tarball to some IFS directory.
(i.e.: /path/to/the/zlib/ifs/source/directory)
Index: zlib/os400/make.sh
===================================================================
--- zlib/os400/make.sh (revision 244761)
+++ zlib/os400/make.sh (working copy)
@@ -260,7 +260,7 @@
echo '#pragma comment(user, "ZLIB version '"${VERSION}"'")' > os400.c
echo '#pragma comment(user, __DATE__)' >> os400.c
echo '#pragma comment(user, __TIME__)' >> os400.c
-echo '#pragma comment(copyright, "Copyright (C) 1995-2016 Jean-Loup Gailly, Mark Adler. OS/400 version by P. Monnerat.")' >> os400.c
+echo '#pragma comment(copyright, "Copyright (C) 1995-2017 Jean-Loup Gailly, Mark Adler. OS/400 version by P. Monnerat.")' >> os400.c
make_module OS400 os400.c
LINK= # No need to rebuild service program yet.
MODULES=
Index: zlib/os400/zlib.inc
===================================================================
--- zlib/os400/zlib.inc (revision 244761)
+++ zlib/os400/zlib.inc (working copy)
@@ -1,7 +1,7 @@
* ZLIB.INC - Interface to the general purpose compression library
*
* ILE RPG400 version by Patrick Monnerat, DATASPHERE.
- * Version 1.2.10
+ * Version 1.2.11
*
*
* WARNING:
@@ -22,12 +22,12 @@
*
* Versioning information.
*
- D ZLIB_VERSION C '1.2.10'
+ D ZLIB_VERSION C '1.2.11'
D ZLIB_VERNUM C X'12a0'
D ZLIB_VER_MAJOR C 1
D ZLIB_VER_MINOR C 2
D ZLIB_VER_REVISION...
- D C 10
+ D C 11
D ZLIB_VER_SUBREVISION...
D C 0
*
Index: zlib/qnx/package.qpg
===================================================================
--- zlib/qnx/package.qpg (revision 244761)
+++ zlib/qnx/package.qpg (working copy)
@@ -25,10 +25,10 @@
<QPG:Files>
<QPG:Add file="../zconf.h" install="/opt/include/" user="root:sys" permission="644"/>
<QPG:Add file="../zlib.h" install="/opt/include/" user="root:sys" permission="644"/>
- <QPG:Add file="../libz.so.1.2.10" install="/opt/lib/" user="root:bin" permission="644"/>
- <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.10"/>
- <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.10"/>
- <QPG:Add file="../libz.so.1.2.10" install="/opt/lib/" component="slib"/>
+ <QPG:Add file="../libz.so.1.2.11" install="/opt/lib/" user="root:bin" permission="644"/>
+ <QPG:Add file="libz.so" install="/opt/lib/" component="dev" filetype="symlink" linkto="libz.so.1.2.11"/>
+ <QPG:Add file="libz.so.1" install="/opt/lib/" filetype="symlink" linkto="libz.so.1.2.11"/>
+ <QPG:Add file="../libz.so.1.2.11" install="/opt/lib/" component="slib"/>
</QPG:Files>
<QPG:PackageFilter>
@@ -63,7 +63,7 @@
</QPM:ProductDescription>
<QPM:ReleaseDescription>
- <QPM:ReleaseVersion>1.2.10</QPM:ReleaseVersion>
+ <QPM:ReleaseVersion>1.2.11</QPM:ReleaseVersion>
<QPM:ReleaseUrgency>Medium</QPM:ReleaseUrgency>
<QPM:ReleaseStability>Stable</QPM:ReleaseStability>
<QPM:ReleaseNoteMinor></QPM:ReleaseNoteMinor>
Index: zlib/treebuild.xml
===================================================================
--- zlib/treebuild.xml (revision 244761)
+++ zlib/treebuild.xml (working copy)
@@ -1,6 +1,6 @@
<?xml version="1.0" ?>
-<package name="zlib" version="1.2.10">
- <library name="zlib" dlversion="1.2.10" dlname="z">
+<package name="zlib" version="1.2.11">
+ <library name="zlib" dlversion="1.2.11" dlname="z">
<property name="description"> zip compression library </property>
<property name="include-target-dir" value="$(@PACKAGE/install-includedir)" />
Index: zlib/trees.c
===================================================================
--- zlib/trees.c (revision 244761)
+++ zlib/trees.c (working copy)
@@ -1,5 +1,5 @@
/* trees.c -- output deflated data using Huffman coding
- * Copyright (C) 1995-2016 Jean-loup Gailly
+ * Copyright (C) 1995-2017 Jean-loup Gailly
* detect_data_type() function provided freely by Cosmin Truta, 2006
* For conditions of distribution and use, see copyright notice in zlib.h
*/
@@ -906,7 +906,7 @@
/* ===========================================================================
* Determine the best encoding for the current block: dynamic trees, static
- * trees or store, and output the encoded block to the zip file.
+ * trees or store, and write out the encoded block.
*/
void ZLIB_INTERNAL _tr_flush_block(s, buf, stored_len, last)
deflate_state *s;
Index: zlib/win32/Makefile.msc
===================================================================
--- zlib/win32/Makefile.msc (revision 244761)
+++ zlib/win32/Makefile.msc (working copy)
@@ -1,5 +1,5 @@
# Makefile for zlib using Microsoft (Visual) C
-# zlib is copyright (C) 1995-2006 Jean-loup Gailly and Mark Adler
+# zlib is copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
#
# Usage:
# nmake -f win32/Makefile.msc (standard build)
Index: zlib/win32/README-WIN32.txt
===================================================================
--- zlib/win32/README-WIN32.txt (revision 244761)
+++ zlib/win32/README-WIN32.txt (working copy)
@@ -1,6 +1,6 @@
ZLIB DATA COMPRESSION LIBRARY
-zlib 1.2.10 is a general purpose data compression library. All the code is
+zlib 1.2.11 is a general purpose data compression library. All the code is
thread safe. The data format used by the zlib library is described by RFCs
(Request for Comments) 1950 to 1952 in the files
http://www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate format)
@@ -22,7 +22,7 @@
Manifest:
-The package zlib-1.2.10-win32-x86.zip will contain the following files:
+The package zlib-1.2.11-win32-x86.zip will contain the following files:
README-WIN32.txt This document
ChangeLog Changes since previous zlib packages
@@ -72,7 +72,7 @@
Copyright notice:
- (C) 1995-2012 Jean-loup Gailly and Mark Adler
+ (C) 1995-2017 Jean-loup Gailly and Mark Adler
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any damages
Index: zlib/win32/VisualC.txt
===================================================================
--- zlib/win32/VisualC.txt (revision 244761)
+++ zlib/win32/VisualC.txt (working copy)
@@ -1,3 +1,3 @@
To build zlib using the Microsoft Visual C++ environment,
-use the appropriate project from the projects/ directory.
+use the appropriate project from the contrib/vstudio/ directory.
Index: zlib/win32/zlib1.rc
===================================================================
--- zlib/win32/zlib1.rc (revision 244761)
+++ zlib/win32/zlib1.rc (working copy)
@@ -26,7 +26,7 @@
VALUE "FileDescription", "zlib data compression library\0"
VALUE "FileVersion", ZLIB_VERSION "\0"
VALUE "InternalName", "zlib1.dll\0"
- VALUE "LegalCopyright", "(C) 1995-2013 Jean-loup Gailly & Mark Adler\0"
+ VALUE "LegalCopyright", "(C) 1995-2017 Jean-loup Gailly & Mark Adler\0"
VALUE "OriginalFilename", "zlib1.dll\0"
VALUE "ProductName", "zlib\0"
VALUE "ProductVersion", ZLIB_VERSION "\0"
Index: zlib/zlib.3
===================================================================
--- zlib/zlib.3 (revision 244761)
+++ zlib/zlib.3 (working copy)
@@ -1,4 +1,4 @@
-.TH ZLIB 3 "2 Jan 2017"
+.TH ZLIB 3 "15 Jan 2017"
.SH NAME
zlib \- compression/decompression library
.SH SYNOPSIS
@@ -105,7 +105,7 @@
Send questions and/or comments to zlib@gzip.org,
or (for the Windows DLL version) to Gilles Vollant (info@winimage.com).
.SH AUTHORS AND LICENSE
-Version 1.2.10
+Version 1.2.11
.LP
Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
.LP
Index: zlib/zlib.h
===================================================================
--- zlib/zlib.h (revision 244761)
+++ zlib/zlib.h (working copy)
@@ -1,5 +1,5 @@
/* zlib.h -- interface of the 'zlib' general purpose compression library
- version 1.2.10, January 2nd, 2017
+ version 1.2.11, January 15th, 2017
Copyright (C) 1995-2017 Jean-loup Gailly and Mark Adler
@@ -37,11 +37,11 @@
extern "C" {
#endif
-#define ZLIB_VERSION "1.2.10"
-#define ZLIB_VERNUM 0x12a0
+#define ZLIB_VERSION "1.2.11"
+#define ZLIB_VERNUM 0x12b0
#define ZLIB_VER_MAJOR 1
#define ZLIB_VER_MINOR 2
-#define ZLIB_VER_REVISION 10
+#define ZLIB_VER_REVISION 11
#define ZLIB_VER_SUBREVISION 0
/*
@@ -712,10 +712,11 @@
used to switch between compression and straight copy of the input data, or
to switch to a different kind of input data requiring a different strategy.
If the compression approach (which is a function of the level) or the
- strategy is changed, then the input available so far is compressed with the
- old level and strategy using deflate(strm, Z_BLOCK). There are three
- approaches for the compression levels 0, 1..3, and 4..9 respectively. The
- new level and strategy will take effect at the next call of deflate().
+ strategy is changed, and if any input has been consumed in a previous
+ deflate() call, then the input available so far is compressed with the old
+ level and strategy using deflate(strm, Z_BLOCK). There are three approaches
+ for the compression levels 0, 1..3, and 4..9 respectively. The new level
+ and strategy will take effect at the next call of deflate().
If a deflate(strm, Z_BLOCK) is performed by deflateParams(), and it does
not have enough output space to complete, then the parameter change will not
Index: zlib/zutil.c
===================================================================
--- zlib/zutil.c (revision 244761)
+++ zlib/zutil.c (working copy)
@@ -1,5 +1,5 @@
/* zutil.c -- target dependent utility functions for the compression library
- * Copyright (C) 1995-2005, 2010, 2011, 2012, 2016 Jean-loup Gailly
+ * Copyright (C) 1995-2017 Jean-loup Gailly
* For conditions of distribution and use, see copyright notice in zlib.h
*/
^ permalink raw reply [flat|nested] 13+ messages in thread