From: "Maciej W. Rozycki" <macro@mips.com>
To: Eric Christopher <echristo@redhat.com>
Cc: binutils@sources.redhat.com, "Maciej W. Rozycki" <macro@linux-mips.org>
Subject: Re: [PATCH] Bad DWARF2 line information for MIPS16
Date: Tue, 22 Feb 2005 23:30:00 -0000 [thread overview]
Message-ID: <Pine.LNX.4.61.0502221926060.20174@perivale.mips.com> (raw)
In-Reply-To: <1109023627.5031.22.camel@localhost.localdomain>
On Mon, 21 Feb 2005, Eric Christopher wrote:
> OK.
Well, I had applied it, but then I discovered it failed for NewABI
targets, like mips64*-linux-gnu, due to RELA relocations being involved.
Shame on me...
I've prepared the obvious fix of forcing the o32 ABI, but rather than
stopping at that, I've decided to keep n32 tested, too, so I've made
another test for the latter and covered relocation setup as well. Here's
the result. Tested for mipsel-linux-gnu, mips64-elf, mips64el-elf,
mips64-linux-gnu, mips64el-linux-gnu with no regressions and the two
latters fixed.
2005-02-22 Maciej W. Rozycki <macro@mips.com>
* gas/mips/mips16-dwarf2.d: Pass -mabi=32. Include relocation
information.
* gas/mips/mips16-dwarf2-n32.d: New test to check DWARF2 line
information for MIPS16 for the n32 ABI.
* gas/mips/mips.exp. Run the new test.
OK to apply?
Maciej
binutils-2.15.94-20050222-mips16-dwarf2-newabi.patch
diff -up --recursive --new-file binutils-2.15.94-20050222.macro/gas/testsuite/gas/mips/mips.exp binutils-2.15.94-20050222/gas/testsuite/gas/mips/mips.exp
--- binutils-2.15.94-20050222.macro/gas/testsuite/gas/mips/mips.exp 2005-02-22 14:32:13.000000000 +0000
+++ binutils-2.15.94-20050222/gas/testsuite/gas/mips/mips.exp 2005-02-22 18:56:37.000000000 +0000
@@ -749,5 +749,8 @@ if { [istarget mips*-*-*] } then {
if { $elf && !$no_mips16 } {
run_dump_test "mips16-dwarf2"
+ if $has_newabi {
+ run_dump_test "mips16-dwarf2-n32"
+ }
}
}
diff -up --recursive --new-file binutils-2.15.94-20050222.macro/gas/testsuite/gas/mips/mips16-dwarf2-n32.d binutils-2.15.94-20050222/gas/testsuite/gas/mips/mips16-dwarf2-n32.d
--- binutils-2.15.94-20050222.macro/gas/testsuite/gas/mips/mips16-dwarf2-n32.d 1970-01-01 00:00:00.000000000 +0000
+++ binutils-2.15.94-20050222/gas/testsuite/gas/mips/mips16-dwarf2-n32.d 2005-02-22 20:00:02.000000000 +0000
@@ -0,0 +1,58 @@
+#readelf: -r -wl
+#name: MIPS16 DWARF2
+#as: -march=mips3 -mabi=n32 -mips16 -no-mdebug -g0
+#source: mips16-dwarf2.s
+
+Relocation section '\.rela\.debug_info' at offset .* contains 4 entries:
+ *Offset * Info * Type * Sym\.Value * Sym\. Name \+ Addend
+0+0006 * 0+..02 * R_MIPS_32 * 0+0000 * \.debug_abbrev \+ 0
+0+000c * 0+..02 * R_MIPS_32 * 0+0000 * \.debug_line \+ 0
+0+0010 * 0+..02 * R_MIPS_32 * 0+0000 * \.text \+ 0
+0+0014 * 0+..02 * R_MIPS_32 * 0+0000 * \.text \+ 910
+
+Relocation section '\.rela\.debug_line' at offset .* contains 1 entries:
+ *Offset * Info * Type * Sym\.Value * Sym\. Name \+ Addend
+0+0030 * 0+..02 * R_MIPS_32 * 0+0000 * .text \+ 1
+
+Dump of debug contents of section \.debug_line:
+
+ Length: 64
+ DWARF Version: 2
+ Prologue Length: 35
+ Minimum Instruction Length: 1
+ Initial value of 'is_stmt': 1
+ Line Base: -5
+ Line Range: 14
+ Opcode Base: 10
+ \(Pointer size: 4\)
+
+ Opcodes:
+ Opcode 1 has 0 args
+ Opcode 2 has 1 args
+ Opcode 3 has 1 args
+ Opcode 4 has 1 args
+ Opcode 5 has 1 args
+ Opcode 6 has 0 args
+ Opcode 7 has 0 args
+ Opcode 8 has 0 args
+ Opcode 9 has 1 args
+
+ The Directory Table is empty\.
+
+ The File Name Table:
+ Entry Dir Time Size Name
+ 1 0 0 0 mips16-dwarf2\.s
+
+ Line Number Statements:
+ Extended opcode 2: set Address to 0x0
+ Special opcode 5: advance Address by 0 to 0x0 and Line by 0 to 1
+ Special opcode 34: advance Address by 2 to 0x2 and Line by 1 to 2
+ Special opcode 34: advance Address by 2 to 0x4 and Line by 1 to 3
+ Special opcode 62: advance Address by 4 to 0x8 and Line by 1 to 4
+ Special opcode 34: advance Address by 2 to 0xa and Line by 1 to 5
+ Special opcode 62: advance Address by 4 to 0xe and Line by 1 to 6
+ Special opcode 62: advance Address by 4 to 0x12 and Line by 1 to 7
+ Advance PC by 2286 to 900
+ Special opcode 6: advance Address by 0 to 0x900 and Line by 1 to 8
+ Advance PC by 15 to 90f
+ Extended opcode 1: End of Sequence
diff -up --recursive --new-file binutils-2.15.94-20050222.macro/gas/testsuite/gas/mips/mips16-dwarf2.d binutils-2.15.94-20050222/gas/testsuite/gas/mips/mips16-dwarf2.d
--- binutils-2.15.94-20050222.macro/gas/testsuite/gas/mips/mips16-dwarf2.d 2005-02-22 12:32:26.000000000 +0000
+++ binutils-2.15.94-20050222/gas/testsuite/gas/mips/mips16-dwarf2.d 2005-02-22 20:00:11.000000000 +0000
@@ -1,8 +1,19 @@
-#readelf: -wl
+#readelf: -r -wl
#name: MIPS16 DWARF2
-#as: -mips16 -no-mdebug -g0
+#as: -mabi=32 -mips16 -no-mdebug -g0
#source: mips16-dwarf2.s
+Relocation section '\.rel\.debug_info' at offset .* contains 4 entries:
+ *Offset * Info * Type * Sym\.Value * Sym\. Name
+0+0006 * 0+..02 * R_MIPS_32 * 0+0000 * \.debug_abbrev
+0+000c * 0+..02 * R_MIPS_32 * 0+0000 * \.debug_line
+0+0010 * 0+..02 * R_MIPS_32 * 0+0000 * \.text
+0+0014 * 0+..02 * R_MIPS_32 * 0+0000 * \.text
+
+Relocation section '\.rel\.debug_line' at offset .* contains 1 entries:
+ *Offset * Info * Type * Sym\.Value * Sym\. Name
+0+0030 * 0+..02 * R_MIPS_32 * 0+0000 * \.text
+
Dump of debug contents of section \.debug_line:
Length: 64
next prev parent reply other threads:[~2005-02-22 20:21 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-02-22 0:44 Maciej W. Rozycki
2005-02-22 0:57 ` Eric Christopher
2005-02-22 23:30 ` Maciej W. Rozycki [this message]
2005-02-22 23:37 ` Eric Christopher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=Pine.LNX.4.61.0502221926060.20174@perivale.mips.com \
--to=macro@mips.com \
--cc=binutils@sources.redhat.com \
--cc=echristo@redhat.com \
--cc=macro@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).