* [PATCH] bfd: enable silent build rules
@ 2021-11-26 3:49 Mike Frysinger
2021-11-29 13:27 ` Nick Clifton
0 siblings, 1 reply; 3+ messages in thread
From: Mike Frysinger @ 2021-11-26 3:49 UTC (permalink / raw)
To: binutils
Also add $(AM_V_xxx) to various manual rules in here.
---
bfd/Makefile.am | 88 ++++++++++++++++++++++++------------------------
bfd/Makefile.in | 88 ++++++++++++++++++++++++------------------------
bfd/configure | 43 +++++++++++++++++++++--
bfd/configure.ac | 1 +
4 files changed, 130 insertions(+), 90 deletions(-)
diff --git a/bfd/Makefile.am b/bfd/Makefile.am
index 86ed76750522..5a667acc62fd 100644
--- a/bfd/Makefile.am
+++ b/bfd/Makefile.am
@@ -796,102 +796,102 @@ libbfd.a: stamp-lib ; @true
# vector names. It is built from config.bfd. It is not compiled by
# itself, but is included by targets.c.
targmatch.h: config.bfd targmatch.sed
- rm -f targmatch.h
- $(SED) -f $(srcdir)/targmatch.sed < $(srcdir)/config.bfd > targmatch.new
- mv -f targmatch.new targmatch.h
+ $(AM_V_at)rm -f targmatch.h
+ $(AM_V_GEN)$(SED) -f $(srcdir)/targmatch.sed < $(srcdir)/config.bfd > targmatch.new
+ $(AM_V_at)mv -f targmatch.new targmatch.h
# When compiling archures.c and targets.c, supply the default target
# info from configure.
targets.lo: targets.c Makefile
if am__fastdepCC
- $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
else
if AMDEP
source='targets.c' object='$@' libtool=yes @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
+ $(AM_V_CC)$(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
endif
archures.lo: archures.c Makefile
if am__fastdepCC
- $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
else
if AMDEP
source='archures.c' object='$@' libtool=yes @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
+ $(AM_V_CC)$(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
endif
dwarf2.lo: dwarf2.c Makefile
if am__fastdepCC
- $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
else
if AMDEP
source='dwarf2.c' object='$@' libtool=yes @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(LTCOMPILE) -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
+ $(AM_V_CC)$(LTCOMPILE) -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
endif
elf32-target.h : elfxx-target.h
- $(SED) -e s/NN/32/g < $< > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< > $@
elf64-target.h : elfxx-target.h
- $(SED) -e s/NN/64/g < $< > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< > $@
elf32-aarch64.c : elfnn-aarch64.c
- echo "#line 1 \"elfnn-aarch64.c\"" > $@
- $(SED) -e s/NN/32/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-aarch64.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-aarch64.c : elfnn-aarch64.c
- echo "#line 1 \"elfnn-aarch64.c\"" > $@
- $(SED) -e s/NN/64/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-aarch64.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
elf32-ia64.c : elfnn-ia64.c
- echo "#line 1 \"elfnn-ia64.c\"" > $@
- $(SED) -e s/NN/32/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-ia64.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-ia64.c : elfnn-ia64.c
- echo "#line 1 \"elfnn-ia64.c\"" > $@
- $(SED) -e s/NN/64/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-ia64.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
elf32-loongarch.c : elfnn-loongarch.c
- echo "#line 1 \"elfnn-loongarch.c\"" > $@
- $(SED) -e s/NN/32/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-loongarch.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-loongarch.c : elfnn-loongarch.c
- echo "#line 1 \"elfnn-loongarch.c\"" > $@
- $(SED) -e s/NN/64/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-loongarch.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
elf32-riscv.c : elfnn-riscv.c
- echo "#line 1 \"elfnn-riscv.c\"" > $@
- $(SED) -e s/NN/32/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-riscv.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-riscv.c : elfnn-riscv.c
- echo "#line 1 \"elfnn-riscv.c\"" > $@
- $(SED) -e s/NN/64/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-riscv.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
peigen.c : peXXigen.c
- echo "#line 1 \"peXXigen.c\"" > $@
- $(SED) -e s/XX/pe/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"peXXigen.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/XX/pe/g < $< >> $@
pepigen.c : peXXigen.c
- echo "#line 1 \"peXXigen.c\"" > $@
- $(SED) -e s/XX/pep/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"peXXigen.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/XX/pep/g < $< >> $@
pex64igen.c: peXXigen.c
- echo "#line 1 \"peXXigen.c\"" > $@
- $(SED) -e s/XX/pex64/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"peXXigen.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/XX/pex64/g < $< >> $@
pe-aarch64igen.c: peXXigen.c
- echo "#line 1 \"peXXigen.c\"" > $@
- $(SED) -e s/XX/peAArch64/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"peXXigen.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/XX/peAArch64/g < $< >> $@
host-aout.lo: Makefile
@@ -984,15 +984,15 @@ bfdver.h: $(srcdir)/version.h $(srcdir)/development.sh $(srcdir)/Makefile.in
# Disable -Werror, if it has been enabled, since coffswap.h won't
# compile with gcc 4.5 and above.
coff-tic4x.lo: coff-tic4x.c
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
coff-tic54x.lo: coff-tic54x.c
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
diff --git a/bfd/Makefile.in b/bfd/Makefile.in
index 47b84f59b034..7c669c1aba59 100644
--- a/bfd/Makefile.in
+++ b/bfd/Makefile.in
@@ -1944,87 +1944,87 @@ libbfd.a: stamp-lib ; @true
# vector names. It is built from config.bfd. It is not compiled by
# itself, but is included by targets.c.
targmatch.h: config.bfd targmatch.sed
- rm -f targmatch.h
- $(SED) -f $(srcdir)/targmatch.sed < $(srcdir)/config.bfd > targmatch.new
- mv -f targmatch.new targmatch.h
+ $(AM_V_at)rm -f targmatch.h
+ $(AM_V_GEN)$(SED) -f $(srcdir)/targmatch.sed < $(srcdir)/config.bfd > targmatch.new
+ $(AM_V_at)mv -f targmatch.new targmatch.h
# When compiling archures.c and targets.c, supply the default target
# info from configure.
targets.lo: targets.c Makefile
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='targets.c' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/targets.c
archures.lo: archures.c Makefile
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='archures.c' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(LTCOMPILE) -c -o $@ $(TDEFAULTS) $(srcdir)/archures.c
dwarf2.lo: dwarf2.c Makefile
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='dwarf2.c' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(LTCOMPILE) -c -o $@ -DDEBUGDIR=\"$(DEBUGDIR)\" $(srcdir)/dwarf2.c
elf32-target.h : elfxx-target.h
- $(SED) -e s/NN/32/g < $< > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< > $@
elf64-target.h : elfxx-target.h
- $(SED) -e s/NN/64/g < $< > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< > $@
elf32-aarch64.c : elfnn-aarch64.c
- echo "#line 1 \"elfnn-aarch64.c\"" > $@
- $(SED) -e s/NN/32/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-aarch64.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-aarch64.c : elfnn-aarch64.c
- echo "#line 1 \"elfnn-aarch64.c\"" > $@
- $(SED) -e s/NN/64/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-aarch64.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
elf32-ia64.c : elfnn-ia64.c
- echo "#line 1 \"elfnn-ia64.c\"" > $@
- $(SED) -e s/NN/32/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-ia64.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-ia64.c : elfnn-ia64.c
- echo "#line 1 \"elfnn-ia64.c\"" > $@
- $(SED) -e s/NN/64/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-ia64.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
elf32-loongarch.c : elfnn-loongarch.c
- echo "#line 1 \"elfnn-loongarch.c\"" > $@
- $(SED) -e s/NN/32/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-loongarch.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-loongarch.c : elfnn-loongarch.c
- echo "#line 1 \"elfnn-loongarch.c\"" > $@
- $(SED) -e s/NN/64/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-loongarch.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
elf32-riscv.c : elfnn-riscv.c
- echo "#line 1 \"elfnn-riscv.c\"" > $@
- $(SED) -e s/NN/32/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-riscv.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/32/g < $< >> $@
elf64-riscv.c : elfnn-riscv.c
- echo "#line 1 \"elfnn-riscv.c\"" > $@
- $(SED) -e s/NN/64/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"elfnn-riscv.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/NN/64/g < $< >> $@
peigen.c : peXXigen.c
- echo "#line 1 \"peXXigen.c\"" > $@
- $(SED) -e s/XX/pe/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"peXXigen.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/XX/pe/g < $< >> $@
pepigen.c : peXXigen.c
- echo "#line 1 \"peXXigen.c\"" > $@
- $(SED) -e s/XX/pep/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"peXXigen.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/XX/pep/g < $< >> $@
pex64igen.c: peXXigen.c
- echo "#line 1 \"peXXigen.c\"" > $@
- $(SED) -e s/XX/pex64/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"peXXigen.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/XX/pex64/g < $< >> $@
pe-aarch64igen.c: peXXigen.c
- echo "#line 1 \"peXXigen.c\"" > $@
- $(SED) -e s/XX/peAArch64/g < $< >> $@
+ $(AM_V_at)echo "#line 1 \"peXXigen.c\"" > $@
+ $(AM_V_GEN)$(SED) -e s/XX/peAArch64/g < $< >> $@
host-aout.lo: Makefile
@@ -2101,18 +2101,18 @@ bfdver.h: $(srcdir)/version.h $(srcdir)/development.sh $(srcdir)/Makefile.in
# Disable -Werror, if it has been enabled, since coffswap.h won't
# compile with gcc 4.5 and above.
coff-tic4x.lo: coff-tic4x.c
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
coff-tic54x.lo: coff-tic54x.c
-@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
-@am__fastdepCC_TRUE@ $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(LTCOMPILE) -c -o $@ $< $(NO_WERROR)
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
diff --git a/bfd/configure b/bfd/configure
index eb782e75e764..d4aa2178b292 100755
--- a/bfd/configure
+++ b/bfd/configure
@@ -3261,6 +3261,45 @@ END
fi
fi
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=0;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
@@ -11045,7 +11084,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11048 "configure"
+#line 11087 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11151,7 +11190,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11154 "configure"
+#line 11193 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
diff --git a/bfd/configure.ac b/bfd/configure.ac
index aa16d92816f6..a578c3a019e5 100644
--- a/bfd/configure.ac
+++ b/bfd/configure.ac
@@ -24,6 +24,7 @@ AC_CONFIG_SRCDIR([libbfd.c])
AC_CANONICAL_TARGET
AM_INIT_AUTOMAKE
+AM_SILENT_RULES([yes])
dnl These must be called before LT_INIT, because it may want
dnl to call AC_CHECK_PROG.
--
2.33.0
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [PATCH] bfd: enable silent build rules
2021-11-26 3:49 [PATCH] bfd: enable silent build rules Mike Frysinger
@ 2021-11-29 13:27 ` Nick Clifton
0 siblings, 0 replies; 3+ messages in thread
From: Nick Clifton @ 2021-11-29 13:27 UTC (permalink / raw)
To: Mike Frysinger, binutils
On 11/26/21 03:49, Mike Frysinger via Binutils wrote:
> Also add $(AM_V_xxx) to various manual rules in here.
> ---
> bfd/Makefile.am | 88 ++++++++++++++++++++++++------------------------
> bfd/Makefile.in | 88 ++++++++++++++++++++++++------------------------
> bfd/configure | 43 +++++++++++++++++++++--
> bfd/configure.ac | 1 +
> 4 files changed, 130 insertions(+), 90 deletions(-)
Approved - please apply.
Cheers
Nick
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH] bfd: enable silent build rules
@ 2021-11-26 3:59 Mike Frysinger
0 siblings, 0 replies; 3+ messages in thread
From: Mike Frysinger @ 2021-11-26 3:59 UTC (permalink / raw)
To: binutils
Also add $(AM_V_xxx) to various manual rules in here.
---
binutils/Makefile.am | 100 +++++++++++++++----------------
binutils/Makefile.in | 100 +++++++++++++++----------------
binutils/configure | 43 +++++++++++++-
binutils/configure.ac | 1 +
binutils/doc/Makefile.am | 124 +++++++++++++++++++--------------------
binutils/doc/Makefile.in | 124 +++++++++++++++++++--------------------
6 files changed, 266 insertions(+), 226 deletions(-)
diff --git a/binutils/Makefile.am b/binutils/Makefile.am
index ee2a66302cdc..9ceb63da7b80 100644
--- a/binutils/Makefile.am
+++ b/binutils/Makefile.am
@@ -214,7 +214,7 @@ check-DEJAGNU: site.exp
fi
development.exp: $(BFDDIR)/development.sh
- $(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
+ $(AM_V_GEN)$(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
| $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
installcheck-local:
@@ -269,14 +269,14 @@ objdump_LDADD = $(OBJDUMP_PRIVATE_OFILES) $(OPCODES) $(LIBCTF) $(BFDLIB) $(LIBIB
objdump.@OBJEXT@:objdump.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
+ $(AM_V_CC)$(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
endif
cxxfilt_SOURCES = cxxfilt.c $(BULIBS)
@@ -311,32 +311,32 @@ addr2line_SOURCES = addr2line.c $(BULIBS)
# -ln $(OBJCOPY_PROG) $(STRIP_PROG)
sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
- ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
- ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
- ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
+ $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
+ $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
+ $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
- ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
+ $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
- $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
+ $(AM_V_CCLD)$(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
- $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
+ $(AM_V_CC)$(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
sysinfo.@OBJEXT@: sysinfo.c
- if [ -r sysinfo.c ]; then \
+ $(AM_V_CC)if [ -r sysinfo.c ]; then \
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
else \
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
fi
bin2c$(EXEEXT_FOR_BUILD): bin2c.c
- $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
+ $(AM_V_CCLD)$(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
embedspu: embedspu.sh Makefile
- awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
- chmod a+x $@
+ $(AM_V_GEN)awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
+ $(AM_V_at)chmod a+x $@
# We need these for parallel make.
sysinfo.h: sysinfo.c
@@ -345,122 +345,122 @@ sysinfo.h: sysinfo.c
# yacc will produce working code which contain compile time warnings.
arparse.@OBJEXT@: arparse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
endif
arlex.@OBJEXT@: arlex.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
endif
dwarf.@OBJEXT@: dwarf.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='dwarf.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
+ $(AM_V_CC)$(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
endif
sysroff.@OBJEXT@: sysroff.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
endif
defparse.@OBJEXT@: defparse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
endif
deflex.@OBJEXT@: deflex.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
endif
rcparse.@OBJEXT@: rcparse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
endif
mcparse.@OBJEXT@: mcparse.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
endif
rclex.@OBJEXT@: rclex.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
endif
mclex.@OBJEXT@: mclex.c
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
+ $(AM_V_CC)$(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
endif
srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)
@@ -471,26 +471,26 @@ dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) $(LEXLIB) $(LIBINTL)
dlltool.@OBJEXT@:
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
+ $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
endif
rescoff.@OBJEXT@:
if am__fastdepCC
- $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
- mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
+ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
else
if AMDEP
source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
endif
- $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
+ $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
endif
coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)
diff --git a/binutils/Makefile.in b/binutils/Makefile.in
index 8f44b5667254..1986261f9e33 100644
--- a/binutils/Makefile.in
+++ b/binutils/Makefile.in
@@ -1452,18 +1452,18 @@ check-DEJAGNU: site.exp
fi
development.exp: $(BFDDIR)/development.sh
- $(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
+ $(AM_V_GEN)$(EGREP) "(development|experimental)=" $(BFDDIR)/development.sh \
| $(AWK) -F= '{ print "set " $$1 " " $$2 }' > $@
installcheck-local:
/bin/sh $(srcdir)/sanity.sh $(bindir)
objdump.@OBJEXT@:objdump.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(OBJDUMP_DEFS) $(srcdir)/objdump.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='objdump.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(OBJDUMP_DEFS) $(srcdir)/objdump.c
# The following is commented out for the conversion to automake.
# This rule creates a single binary that switches between ar and ranlib
@@ -1484,32 +1484,32 @@ objdump.@OBJEXT@:objdump.c
# -ln $(OBJCOPY_PROG) $(STRIP_PROG)
sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
- ./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
- ./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
- ./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
+ $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
+ $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
+ $(AM_V_at)./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c
sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
- ./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
+ $(AM_V_GEN)./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h
sysinfo$(EXEEXT_FOR_BUILD): sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
- $(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
+ $(AM_V_CCLD)$(CC_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) -o $@ sysinfo.@OBJEXT@ syslex_wrap.@OBJEXT@
syslex_wrap.@OBJEXT@: syslex_wrap.c syslex.c sysinfo.h config.h
- $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
+ $(AM_V_CC)$(CC_FOR_BUILD) -c -I. -I$(srcdir) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/syslex_wrap.c
sysinfo.@OBJEXT@: sysinfo.c
- if [ -r sysinfo.c ]; then \
+ $(AM_V_CC)if [ -r sysinfo.c ]; then \
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) sysinfo.c ; \
else \
$(CC_FOR_BUILD) -c -I. $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(NO_WERROR) $(srcdir)/sysinfo.c ; \
fi
bin2c$(EXEEXT_FOR_BUILD): bin2c.c
- $(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
+ $(AM_V_CCLD)$(CC_FOR_BUILD) -o $@ $(AM_CPPFLAGS) $(AM_CFLAGS_FOR_BUILD) $(CFLAGS_FOR_BUILD) $(LDFLAGS_FOR_BUILD) $(srcdir)/bin2c.c
embedspu: embedspu.sh Makefile
- awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
- chmod a+x $@
+ $(AM_V_GEN)awk '/^program_transform_name=/ {print "program_transform_name=\"$(program_transform_name)\""; next} {print}' < $< > $@
+ $(AM_V_at)chmod a+x $@
# We need these for parallel make.
sysinfo.h: sysinfo.c
@@ -1517,89 +1517,89 @@ sysinfo.h: sysinfo.c
# Disable -Werror, if it has been enabled, since old versions of bison/
# yacc will produce working code which contain compile time warnings.
arparse.@OBJEXT@: arparse.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='arparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f arparse.c || echo $(srcdir)/`arparse.c $(NO_WERROR)
arlex.@OBJEXT@: arlex.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='arlex.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f arlex.c || echo $(srcdir)/`arlex.c $(NO_WERROR)
dwarf.@OBJEXT@: dwarf.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='dwarf.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) $(DEBUGINFOD_CFLAGS) -c -o $@ $(srcdir)/dwarf.c
sysroff.@OBJEXT@: sysroff.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='sysroff.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f sysroff.c || echo $(srcdir)/`sysroff.c $(NO_WERROR)
defparse.@OBJEXT@: defparse.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='defparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f defparse.c || echo $(srcdir)/`defparse.c $(NO_WERROR)
deflex.@OBJEXT@: deflex.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='deflex.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f deflex.c || echo $(srcdir)/`deflex.c $(NO_WERROR)
rcparse.@OBJEXT@: rcparse.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f rcparse.c || echo $(srcdir)/`rcparse.c $(NO_WERROR)
mcparse.@OBJEXT@: mcparse.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='mcparse.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c `test -f mcparse.c || echo $(srcdir)/`mcparse.c $(NO_WERROR)
rclex.@OBJEXT@: rclex.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/rclex.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(srcdir)/rclex.c $(NO_WERROR)
mclex.@OBJEXT@: mclex.c
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(srcdir)/mclex.c $(NO_WERROR)
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='mclex.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(srcdir)/mclex.c $(NO_WERROR)
srconv.@OBJEXT@: sysroff.c
dlltool.@OBJEXT@:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='dlltool.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c
rescoff.@OBJEXT@:
-@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
-@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@am__fastdepCC_TRUE@ $(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
+@am__fastdepCC_TRUE@ $(AM_V_at)mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='rescoff.c' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@ $(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
+@am__fastdepCC_FALSE@ $(AM_V_CC)$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/rescoff.c
sysdump.@OBJEXT@: sysroff.c
diststuff: $(EXTRA_DIST) info
diff --git a/binutils/configure b/binutils/configure
index 2cdaeae4e690..1df56455fa7a 100755
--- a/binutils/configure
+++ b/binutils/configure
@@ -3334,6 +3334,45 @@ END
fi
fi
+# Check whether --enable-silent-rules was given.
+if test "${enable_silent_rules+set}" = set; then :
+ enableval=$enable_silent_rules;
+fi
+
+case $enable_silent_rules in # (((
+ yes) AM_DEFAULT_VERBOSITY=0;;
+ no) AM_DEFAULT_VERBOSITY=1;;
+ *) AM_DEFAULT_VERBOSITY=0;;
+esac
+am_make=${MAKE-make}
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
+$as_echo_n "checking whether $am_make supports nested variables... " >&6; }
+if ${am_cv_make_support_nested_variables+:} false; then :
+ $as_echo_n "(cached) " >&6
+else
+ if $as_echo 'TRUE=$(BAR$(V))
+BAR0=false
+BAR1=true
+V=1
+am__doit:
+ @$(TRUE)
+.PHONY: am__doit' | $am_make -f - >/dev/null 2>&1; then
+ am_cv_make_support_nested_variables=yes
+else
+ am_cv_make_support_nested_variables=no
+fi
+fi
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
+$as_echo "$am_cv_make_support_nested_variables" >&6; }
+if test $am_cv_make_support_nested_variables = yes; then
+ AM_V='$(V)'
+ AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+ AM_V=$AM_DEFAULT_VERBOSITY
+ AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+AM_BACKSLASH='\'
+
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
@@ -10932,7 +10971,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 10935 "configure"
+#line 10974 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
@@ -11038,7 +11077,7 @@ else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 11041 "configure"
+#line 11080 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
diff --git a/binutils/configure.ac b/binutils/configure.ac
index 9d17b399aecb..b0677ba5f20e 100644
--- a/binutils/configure.ac
+++ b/binutils/configure.ac
@@ -25,6 +25,7 @@ AC_CONFIG_SRCDIR(ar.c)
AC_CANONICAL_TARGET
AM_INIT_AUTOMAKE
+AM_SILENT_RULES([yes])
AC_PROG_CC
AC_GNU_SOURCE
diff --git a/binutils/doc/Makefile.am b/binutils/doc/Makefile.am
index ba53f92560bb..90b238ddf8d9 100644
--- a/binutils/doc/Makefile.am
+++ b/binutils/doc/Makefile.am
@@ -59,114 +59,114 @@ TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../libiberty" \
# Man page generation from texinfo
addr2line.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
- -($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
+ $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f addr2line.pod
+ $(AM_V_at)rm -f addr2line.pod
ar.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
- -($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
+ $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f ar.pod
+ $(AM_V_at)rm -f ar.pod
dlltool.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
- -($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
+ $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f dlltool.pod
+ $(AM_V_at)rm -f dlltool.pod
nm.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
- -($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
+ $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f nm.pod
+ $(AM_V_at)rm -f nm.pod
objcopy.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
- -($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
+ $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f objcopy.pod
+ $(AM_V_at)rm -f objcopy.pod
objdump.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
- -($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
+ $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f objdump.pod
+ $(AM_V_at)rm -f objdump.pod
ranlib.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
- -($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
+ $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f ranlib.pod
+ $(AM_V_at)rm -f ranlib.pod
readelf.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
- -($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
+ $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f readelf.pod
+ $(AM_V_at)rm -f readelf.pod
size.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
- -($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
+ $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f size.pod
+ $(AM_V_at)rm -f size.pod
strings.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
- -($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
+ $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f strings.pod
+ $(AM_V_at)rm -f strings.pod
strip.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
- -($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
+ $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f strip.pod
+ $(AM_V_at)rm -f strip.pod
elfedit.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
- -($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
+ $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f elfedit.pod
+ $(AM_V_at)rm -f elfedit.pod
windres.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
- -($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
+ $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f windres.pod
+ $(AM_V_at)rm -f windres.pod
windmc.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
- -($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
+ $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f windmc.pod
+ $(AM_V_at)rm -f windmc.pod
cxxfilt.man: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
- -($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
+ $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $(DEMANGLER_NAME).pod
+ $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
MAINTAINERCLEANFILES = $(man_MANS) binutils.info cxxfilt.man
$(DEMANGLER_NAME).1: cxxfilt.man Makefile
- if test -f cxxfilt.man; then \
+ $(AM_V_GEN)if test -f cxxfilt.man; then \
man=cxxfilt.man; \
else \
man=$(srcdir)/cxxfilt.man; \
@@ -177,7 +177,7 @@ $(DEMANGLER_NAME).1: cxxfilt.man Makefile
html-local: binutils/index.html
binutils/index.html: binutils.texi $(binutils_TEXINFOS)
- $(AM_V_at)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
+ $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
--split=node -I$(srcdir) $(srcdir)/binutils.texi
# Maintenance
diff --git a/binutils/doc/Makefile.in b/binutils/doc/Makefile.in
index 024a642e7994..d42cdd87929b 100644
--- a/binutils/doc/Makefile.in
+++ b/binutils/doc/Makefile.in
@@ -916,112 +916,112 @@ uninstall-man: uninstall-man1
# Man page generation from texinfo
addr2line.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
- -($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Daddr2line < $(binutils_TEXI) > addr2line.pod
+ $(AM_V_at)-($(POD2MAN) addr2line.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f addr2line.pod
+ $(AM_V_at)rm -f addr2line.pod
ar.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
- -($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dar < $(binutils_TEXI) > ar.pod
+ $(AM_V_at)-($(POD2MAN) ar.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f ar.pod
+ $(AM_V_at)rm -f ar.pod
dlltool.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
- -($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Ddlltool < $(binutils_TEXI) > dlltool.pod
+ $(AM_V_at)-($(POD2MAN) dlltool.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f dlltool.pod
+ $(AM_V_at)rm -f dlltool.pod
nm.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
- -($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dnm < $(binutils_TEXI) > nm.pod
+ $(AM_V_at)-($(POD2MAN) nm.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f nm.pod
+ $(AM_V_at)rm -f nm.pod
objcopy.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
- -($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjcopy < $(binutils_TEXI) > objcopy.pod
+ $(AM_V_at)-($(POD2MAN) objcopy.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f objcopy.pod
+ $(AM_V_at)rm -f objcopy.pod
objdump.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
- -($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dobjdump < $(binutils_TEXI) > objdump.pod
+ $(AM_V_at)-($(POD2MAN) objdump.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f objdump.pod
+ $(AM_V_at)rm -f objdump.pod
ranlib.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
- -($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dranlib < $(binutils_TEXI) > ranlib.pod
+ $(AM_V_at)-($(POD2MAN) ranlib.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f ranlib.pod
+ $(AM_V_at)rm -f ranlib.pod
readelf.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
- -($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dreadelf < $(binutils_TEXI) > readelf.pod
+ $(AM_V_at)-($(POD2MAN) readelf.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f readelf.pod
+ $(AM_V_at)rm -f readelf.pod
size.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
- -($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dsize < $(binutils_TEXI) > size.pod
+ $(AM_V_at)-($(POD2MAN) size.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f size.pod
+ $(AM_V_at)rm -f size.pod
strings.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
- -($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrings < $(binutils_TEXI) > strings.pod
+ $(AM_V_at)-($(POD2MAN) strings.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f strings.pod
+ $(AM_V_at)rm -f strings.pod
strip.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
- -($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dstrip < $(binutils_TEXI) > strip.pod
+ $(AM_V_at)-($(POD2MAN) strip.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f strip.pod
+ $(AM_V_at)rm -f strip.pod
elfedit.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
- -($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Delfedit < $(binutils_TEXI) > elfedit.pod
+ $(AM_V_at)-($(POD2MAN) elfedit.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f elfedit.pod
+ $(AM_V_at)rm -f elfedit.pod
windres.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
- -($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindres < $(binutils_TEXI) > windres.pod
+ $(AM_V_at)-($(POD2MAN) windres.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f windres.pod
+ $(AM_V_at)rm -f windres.pod
windmc.1: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
- -($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dwindmc < $(binutils_TEXI) > windmc.pod
+ $(AM_V_at)-($(POD2MAN) windmc.pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f windmc.pod
+ $(AM_V_at)rm -f windmc.pod
cxxfilt.man: $(binutils_TEXI)
- touch $@
- -$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
- -($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
+ $(AM_V_GEN)touch $@
+ $(AM_V_at)-$(TEXI2POD) $(MANCONF) -Dcxxfilt < $(binutils_TEXI) > $(DEMANGLER_NAME).pod
+ $(AM_V_at)-($(POD2MAN) $(DEMANGLER_NAME).pod | sed -e '/^.if n .na/d' > $@.T$$$$ && \
mv -f $@.T$$$$ $@) || (rm -f $@.T$$$$ && exit 1)
- rm -f $(DEMANGLER_NAME).pod
+ $(AM_V_at)rm -f $(DEMANGLER_NAME).pod
$(DEMANGLER_NAME).1: cxxfilt.man Makefile
- if test -f cxxfilt.man; then \
+ $(AM_V_GEN)if test -f cxxfilt.man; then \
man=cxxfilt.man; \
else \
man=$(srcdir)/cxxfilt.man; \
@@ -1032,7 +1032,7 @@ $(DEMANGLER_NAME).1: cxxfilt.man Makefile
html-local: binutils/index.html
binutils/index.html: binutils.texi $(binutils_TEXINFOS)
- $(AM_V_at)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
+ $(AM_V_GEN)$(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) \
--split=node -I$(srcdir) $(srcdir)/binutils.texi
# Maintenance
--
2.33.0
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2021-11-29 13:27 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-11-26 3:49 [PATCH] bfd: enable silent build rules Mike Frysinger
2021-11-29 13:27 ` Nick Clifton
2021-11-26 3:59 Mike Frysinger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).