From: Nikita Orlov <nikitos1550@yandex.ru>
To: Zhenqiang Chen <zhenqiang.chen@linaro.org>
Cc: "crossgcc@sourceware.org" <crossgcc@sourceware.org>
Subject: Re: Trouble building spec. toolchain for ARM Hi3531
Date: Tue, 22 Apr 2014 04:28:00 -0000 [thread overview]
Message-ID: <4482561398140930@web3g.yandex.ru> (raw)
In-Reply-To: <CACgzC7ASEypjLEskUppAH7+wFqvDCEbfxrMFsKo27H14Bq=p1w@mail.gmail.com>
Hello!
Using built-in specs.
Target: arm-hisiv200-linux-gnueabi
Configured with: ../gcc-4.4-2010q1/configure --host=i686-pc-linux-gnu --build=i686-pc-linux-gnu --target=arm-hisiv200-linux-gnueabi --prefix=/home/c00132816/toolchain_glibc/install/arm-hisiv200-linux --enable-threads --disable-libmudflap --disable-libssp --disable-libstdcxx-pch --with-arch=armv5te --with-gnu-as --with-gnu-ld --enable-languages=c,c++ --enable-shared --enable-lto --enable-symvers=gnu --enable-__cxa_atexit --disable-nls --enable-extra-hisi-multilibs --with-sysroot=/home/c00132816/toolchain_glibc/install/arm-hisiv200-linux/target --with-build-sysroot=/home/c00132816/toolchain_glibc/install/arm-hisiv200-linux/target --with-gmp=/home/c00132816/toolchain_glibc/install/host_lib --with-mpfr=/home/c00132816/toolchain_glibc/install/host_lib --with-ppl=/home/c00132816/toolchain_glibc/install/host_lib --with-cloog=/home/c00132816/toolchain_glibc/install/host_lib --with-libelf=/home/c00132816/toolchain_glibc/install/host_lib --with-host-libstdcxx='-static-libgcc -Wl,-Bstatic,-lstdc++,-Bstatic -lm' --enable-libgomp --enable-poison-system-directories --with-libelf=/home/c00132816/toolchain_glibc/install/host_lib --with-pkgversion='Hisilicon_v200(gcc4.4-290+glibc-2.11+eabi+nptl)' --with-bugurl=http://www.hisilicon.com/cn/service/claim.html
Thread model: posix
gcc version 4.4.1 (Hisilicon_v200(gcc4.4-290+glibc-2.11+eabi+nptl))
Linaro (version https://launchpad.net/linaro-toolchain-binaries/trunk/2012.04/+download/gcc-linaro-arm-linux-gnueabi-2012.04-20120426_linux.tar.bz2) don`t work
But, I have tested buildroot internal toolchain, it works! I don`t know why... It is very strange.
./arm-buildroot-linux-gnueabi-gcc -v
Using built-in specs.
COLLECT_GCC=./arm-buildroot-linux-gnueabi-gcc
COLLECT_LTO_WRAPPER=/home/nikita/Downloads/123/Hi3531/01.software/board/Hi3531_SDK_V2.0.8.0/MY/buildroot/output/host/usr/libexec/gcc/arm-buildroot-linux-gnueabi/4.8.2/lto-wrapper
Target: arm-buildroot-linux-gnueabi
Configured with: ./configure --prefix=/home/nikita/Downloads/123/Hi3531/01.software/board/Hi3531_SDK_V2.0.8.0/MY/buildroot/output/host/usr --sysconfdir=/home/nikita/Downloads/123/Hi3531/01.software/board/Hi3531_SDK_V2.0.8.0/MY/buildroot/output/host/etc --enable-shared --enable-static --target=arm-buildroot-linux-gnueabi --with-sysroot=/home/nikita/Downloads/123/Hi3531/01.software/board/Hi3531_SDK_V2.0.8.0/MY/buildroot/output/host/usr/arm-buildroot-linux-gnueabi/sysroot --disable-__cxa_atexit --with-gnu-ld --disable-libssp --disable-multilib --with-gmp=/home/nikita/Downloads/123/Hi3531/01.software/board/Hi3531_SDK_V2.0.8.0/MY/buildroot/output/host/usr --with-mpfr=/home/nikita/Downloads/123/Hi3531/01.software/board/Hi3531_SDK_V2.0.8.0/MY/buildroot/output/host/usr --enable-target-optspace --disable-libquadmath --enable-tls --disable-libmudflap --enable-threads --with-mpc=/home/nikita/Downloads/123/Hi3531/01.software/board/Hi3531_SDK_V2.0.8.0/MY/buildroot/output/host/usr --disable-decimal-float --with-arch=armv7-a --with-abi=aapcs-linux --with-cpu=cortex-a9 --with-fpu=vfpv3-d16 --with-float=softfp --with-mode=arm --with-pkgversion='Buildroot 2014.05-git-00854-gdd61213' --with-bugurl=http://bugs.buildroot.net/ --enable-languages=c,c++ --with-build-time-tools=/home/nikita/Downloads/123/Hi3531/01.software/board/Hi3531_SDK_V2.0.8.0/MY/buildroot/output/host/usr/arm-buildroot-linux-gnueabi/bin --disable-libgomp
Thread model: posix
gcc version 4.8.2 (Buildroot 2014.05-git-00854-gdd61213)
Here is /proc/cpuinfo from original kernel, maybe it will be usefull
# cat /proc/cpuinfo
Processor: ARMv7 Processor rev 0 (v7l)
processor: 0
BogoMIPS: 1849.75
processor: 1
BogoMIPS: 1856.30
Features: swp half thumb fastmult vfp edsp vfpv3 vfpv3d16
CPU implementer: 0x41
CPU architecture: 7
CPU variant: 0x3
CPU part: 0xc09
CPU revision: 0
Hardware: godnet
Revision: 0000
Serial: 0000000000000000
22.04.2014, 06:56, "Zhenqiang Chen" <zhenqiang.chen@linaro.org>:
> Can you show the default config for arm-hisiv200-linux-gcc?
>
> arm-hisiv200-linux-gcc -v
>
> Please try Linaro 4.7 release. If it works, you can use the same
> config for your build.
>
> https://launchpad.net/linaro-toolchain-binaries/trunk/2012.04/+download/gcc-linaro-arm-linux-gnueabi-2012.04-20120426_linux.tar.bz2
>
> On 21 April 2014 23:28, Nikita Orlov <nikitos1550@yandex.ru> wrote:
>
>> P.S.
>> Architecture level = armv7-a
>>
>> 21.04.2014, 19:16, "Nikita Orlov" <nikitos1550@yandex.ru>:
>>> Hello!
>>>
>>> I have maybe strange problem, my knowledge is not enough to solve it, so I`m try to find help here.
>>>
>>> I have a board with ARM SoC Hi3531. Brief datasheet - http://www.hkvstar.com/pdf/Hi3531.pdf
>>> Specs of processor is:
>>> ARM Cortex A9 dual cores
>>> - Up to 930 MHz
>>> - 32 KB I-cache and 32 KB D-cache
>>> - 256 KB L2 cache
>>>
>>> I have an SDK for it. SDK contains linux kernel 3.0.8 with some editions for support this device (march-godnet dir in /arch/arm).
>>> Toolchain is arm-hisiv200-linux-gcc (Hisilicon_v200(gcc4.4-290+glibc-2.11+eabi+nptl)) 4.4.1
>>> There are some precompiled modules for this SoC. Note said that:
>>>
>>> Hi3531 support hardware floating-point. And all libs in default file system are compiled to hardware floating-point. So it's strongly recommen$
>>> CFLAGS += -march=armv7-a -mcpu=cortex-a9 -mfloat-abi=softfp -mfpu=vfpv3-d16
>>> CXXFlAGS +=-march=armv7-a -mcpu=cortex-a9 -mfloat-abi=softfp -mfpu=vfpv3-d16
>>>
>>> So, as I understand my ARM is
>>> armv7-a, cortex-a9, softfp, vfpv3-d16
>>>
>>> On the board there is installed U-boot to SPI slash memory chip. I can connect to board via serial port and get access to U-boot.
>>> So, I can use my kernel via usb or TFTP and edit kernel boot params.
>>>
>>> If I compile kernel with toolchain from SDK, everything is good, kernel loads.
>>>
>>> I try to build my own toolchain for this SoC, with last gcc, binutils and glibc via crosstool-NG 1.9.0
>>> I have a number of different configs for crosstool-NG, it builds toolchain with no errors, but when I compile kernel (it builds ok), after booting it
>>> via U-boot nothing happens, no errors just a string
>>> Uncopressed kernel ok, booting... (something like this words)
>>> After it usually there is some boot log, but it seems something goes wrong.
>>>
>>> I think my mistake is somewhere in configuring Target options menu (ct-ng menuconfig)
>>> I choose:
>>> Target Architecture - arm
>>> Suffix to the arch-part - nothing
>>> Build a multilib toolchain - NO
>>> Use the MMU - Yes (SoC supports it)
>>> Endianness: - Little endian
>>> Bitness: - 32-bit
>>> Architecture level
>>> Emit assembly for CPU - cortex-a9
>>> Tune for CPU - nothing
>>> Use specific FPU vfpv3-d16
>>> Floating point: softfp
>>> Target CFLAGS - nothing
>>> Target LDFLAGS - nothing
>>> Default instruction set mode - arm
>>> Use Thumb-interworking - no
>>> Use EABI - YES
>>>
>>> I use headers from my kernel tree.
>>> gcc - 4.8.1
>>>
>>> As I understand settings of binutls, glibc, and others don`t affects step of kernel building and booting, so I left them defaults.
>>>
>>> So, I think I need to config Target options right to build and boot kernel.
>>> I`m asking for advice or way to solve this.
>>>
>>> Thanks!
>>>
>>> --
>>> Nikita Orlov
>>> Skype: nik_stet
>>> QQ: 2717846083
>>>
>>> --
>>> For unsubscribe information see http://sourceware.org/lists.html#faq
>> --
>> Nikita Orlov
>> Skype: nik_stet
>> QQ: 2717846083
>>
>> --
>> For unsubscribe information see http://sourceware.org/lists.html#faq
--
Nikita Orlov
Skype: nik_stet
QQ: 2717846083
prev parent reply other threads:[~2014-04-22 4:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-21 15:16 Nikita Orlov
2014-04-21 15:28 ` Nikita Orlov
2014-04-22 2:56 ` Zhenqiang Chen
2014-04-22 4:28 ` Nikita Orlov [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4482561398140930@web3g.yandex.ru \
--to=nikitos1550@yandex.ru \
--cc=crossgcc@sourceware.org \
--cc=zhenqiang.chen@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).