public inbox for crossgcc@sourceware.org
 help / color / mirror / Atom feed
* Wired Video Doorbell -- Unicon Vision
@ 2020-09-23 18:22 Sisi
  0 siblings, 0 replies; only message in thread
From: Sisi @ 2020-09-23 18:22 UTC (permalink / raw)
  To: crossgcc

 

Hi Dear,
   

DC AC Directly Power Supply 2K (2304 X 1296) HD Video Doorbell Camera
Smart Wireless Video Door Intercom 

KEY advantages and differences with normal doorbell in the whole
market :  

1) Compatible with Amazon Echo & Google Home
 2) Support ONVIF
 3) Support Cloud service recording
 4) Come with 20° installation bracket 
 5) Support Host leaves message 

Specification : 

Image 

Image Sensor 

3 Megapixel 2304*1296 

Day/Night 

Mechanical Dual IR-CUT Filter 

Lens Angle 

160 degree viewing angle 

Video/Audio 

Pre-recorded
 Quick Responses 

Support 30 seconds voice message prerecorded (Record by yourself) 

Video Encoding 

H.264 Baseline, Dual Steams 

Frame Rate 

25fps@1920*1080P 

Audio Input 

Built-in Micphone 

Audio Output 

Built-in Speaker 

Network 

Wifi conformance 

IEEE802.11b/g/n 

Network Protocol 

FTP/PPPOE/DHCP/DDNS/NTP/UPNP/RTSP 

Physical 

Smart Alarm 

PIR-Passive Infrared 

Doorbell 

Button 

Power 

Button 

Local storage 

Micro SD Slot, 128GB Capacity Max 

Factory Default 

Reset Button, Hold on 3 seconds 

IR Distance 

8M 

Power supply 

Hardwire 12V ~ 24V AC or 12V DC Power source 

Wake up time 

Within 600ms 

Working Environment 

Temperature : 0~35 degree, Humidity < 65% 

  
  
 Q1: Is the video doorbell powered by battery?
 A1: No, this video doorbell reuiquires constant hardwire power
supply. Compared to battery powered
 doorbells, this wired video doorbell has more advanced features, like
supporting full day recording, no
 delay quick response to visitor calls, and smaller in dimension,
fitting into narrow door frames.
 Q2: How to connect the hardwire to the doorbell? Does the cable order
matter?
 A2: Your doorbell works with both DC 12V and AC 12V - 24V hardwire
power source. There are 2 terminal
 screws on the rear of your doobrell, and you can connect each wire to
each power terminal screw. The
 cable order doesn’t matter.
 Q3: I found a Micro USB port near the Micro SD Slot, what’s it for?
 A3: You can power up the doorbell by the Micro USB port, using an
USB compatible charger and cable. It
 is designed mainly for product testing in the factory.
 Q4: What’s the Wi-Fi range of the video doorbell?
 A4: The video doorbell works with any 2.4GHz wireless Wi-Fi router,
mesh system or modems. In outfield
 test, it works well in most 3000sqft houses. The Wi-Fi range may vary
because of different WiFi transmit
 power, transmission distance and wall blocks in between.
 Q5: I installed my video doorbell, but the video or audio quality is
poor
 A5: In live view interface, WiFi status will be listed. It is
suggested to ensure the Wi-Fi status be more
 than 70%, so as to get your doorbell work as expected. If you think
your problem is caused by low Wi-Fi
 signal strength, try moving your Wi-Fi router closer, or add one
Wi-Fi Booster to extend your Wi-Fi range.
 Q6: Does the video doorbell work with existing indoor mechanical
chime?
 A6: No. The doorbell comes with an USB compatible wireless chime to
notify people when your vistor
 presses the doorbell button. If you have an existing indoor chime,
please use the provided jumper to
 bypass the existing chime, so as to provide sufficient power to the
new video doorbell.
 Q7: How many wireless chimes can be paired with one video doorbell?
 A7: You can add as many wireless chimes as your wish on one video
doorbell.
 Q8: Does it support customized Motion Detection Zones.
 A8: Yes it does. Go to Settings - Alarm Setting - Motion
detection - Alarm Area. Use your finger tips
 to draw one or more customized motion detection zones and save your
settings, and the orange zones
 are motion detection zones.
 Q9: How does the video doorbell detect the motions? Can motion
detection be disabled?
 A9: The doorbell camera detects motion through the full-image pixel
contrast, it will further undergo a
 human-shape detection to reduce false alarm rate. You can adjust the
motion detection sensitivity,
 customize detection zone, schedule alarm intervals and disable motion
detection accordingly due to
 various user scenarios.
 Q10: Does the doorbell support cloud storage?
 A10: Your doorbell support MicroSD card storage as well as cloud
storage. You can activate the cloud
 storage service in App. There is a 7-day free cloud recording trial
service. Please note that cloud storage
 only support event recording but not full day recording.
  

 24 hours online whatsapp : +8613750096801
 SKYPE : sisiyang813
 Email : sisiyang@unismartvision.com
 If you don't want to receive any further notice of our new
products, please click here to unsubscribe.
http://uniconvisioncctv.com/wms/lists/lv205n8syscd0/unsubscribe/xw9688bnfece8/mz373r3a03000


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2020-09-23 18:22 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-23 18:22 Wired Video Doorbell -- Unicon Vision Sisi

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).