* error while loading shared libraries: libstdc++.so ------ confused ..???
[not found] <CAB94n=cPtV=qt=FBVcAxwu945vMEQ7nERRSMdKAfdq6vUOG1Dg@mail.gmail.com>
@ 2013-02-04 6:06 ` allan George
2013-02-04 8:18 ` allan George
0 siblings, 1 reply; 5+ messages in thread
From: allan George @ 2013-02-04 6:06 UTC (permalink / raw)
To: crossgcc
Hi,
I have build my toolchain using following link it have , crosscompiler
c++ support enabled :-----
http://www.bootc.net/archives/2012/05/26/how-to-build-a-cross-compiler-for-your-raspberry-pi/
Now i am compiling my code in Scratchbox2, c++ code is compiling but
not able to run it throws this error :-------
./a.out: error while loading shared libraries: libstdc++.so
Compiler version :------------------
[SB2 simple armhf] ignite@ignite testing $ g++ version
arm-unknown-linux-gnueabi-g++: error: version: No such file or directory
arm-unknown-linux-gnueabi-g++: fatal error: no input files
compilation terminated.
[SB2 simple armhf] ignite@ignite testing $ g++ --version
arm-unknown-linux-gnueabi-g++ (crosstool-NG 1.17.0) 4.7.3 20121001 (prerelease)
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
compiling successful :---------------
[SB2 simple armhf] ignite@ignite testing $ g++ new.cpp
output file format :----------------
[SB2 simple armhf] ignite@ignite testing $ file a.out
a.out: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically
linked (uses shared libs), for GNU/Linux 3.6.3, not stripped
Error thrown :---------
[SB2 simple armhf] ignite@ignite testing $ ./a.out
./a.out: error while loading shared libraries: libstdc++.so.6: cannot
open shared object file: No such file or directory
Any suggestion why this error is. Please suggest.
Regards,
//Allan
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: error while loading shared libraries: libstdc++.so ------ confused ..???
2013-02-04 6:06 ` error while loading shared libraries: libstdc++.so ------ confused ..??? allan George
@ 2013-02-04 8:18 ` allan George
2013-02-04 8:53 ` allan George
2013-02-04 16:57 ` Trevor Woerner
0 siblings, 2 replies; 5+ messages in thread
From: allan George @ 2013-02-04 8:18 UTC (permalink / raw)
To: crossgcc
when i run this command :--------- >>> whereis libstdc++.so
it shows the library
[SB2 simple armhf] ignite@ignite testing $ whereis libstdc++.so
libstdc++:
[SB2 simple armhf] ignite@ignite testing $
Even i run ldconfig -v same error is there :-----
[SB2 simple armhf] ignite@ignite testing $ ldconfig -v
/home/ignite/sbox2/rootfs/armhf/sbin/ldconfig: Can't open
configuration file /home/ignite/sbox2/rootfs/armhf/etc/ld.so.conf: No
such file or directory
/lib/arm-linux-gnueabihf:
libpcprofile.so -> libpcprofile.so
libcrypt.so.1 -> libcrypt-2.13.so
libdl.so.2 -> libdl-2.13.so
libSegFault.so -> libSegFault.so
libmount.so.1 -> libmount.so.1.1.0
libnsl.so.1 -> libnsl-2.13.so
libncurses.so.5 -> libncurses.so.5.9
libmemusage.so -> libmemusage.so
libpamc.so.0 -> libpamc.so.0.82.1
libz.so.1 -> libz.so.1.2.7
libuuid.so.1 -> libuuid.so.1.3.0
libattr.so.1 -> libattr.so.1.1.0
libresolv.so.2 -> libresolv-2.13.so
libncursesw.so.5 -> libncursesw.so.5.9
libprocps.so.0 -> libprocps.so.0.0.1
libcom_err.so.2 -> libcom_err.so.2.1
libsepol.so.1 -> libsepol.so.1
libbz2.so.1.0 -> libbz2.so.1.0.4
libnss_files.so.2 -> libnss_files-2.13.so
libpthread.so.0 -> libpthread-2.13.so
libss.so.2 -> libss.so.2.0
libdbus-1.so.3 -> libdbus-1.so.3.7.2
libacl.so.1 -> libacl.so.1.1.0
libpam.so.0 -> libpam.so.0.83.0
libBrokenLocale.so.1 -> libBrokenLocale-2.13.so
liblzma.so.5 -> liblzma.so.5.0.0
librt.so.1 -> librt-2.13.so
libudev.so.0 -> libudev.so.0.13.0
libgcc_s.so.1 -> libgcc_s.so.1
libanl.so.1 -> libanl-2.13.so
libm.so.6 -> libm-2.13.so
libnss_hesiod.so.2 -> libnss_hesiod-2.13.so
libselinux.so.1 -> libselinux.so.1
libpam_misc.so.0 -> libpam_misc.so.0.82.0
libext2fs.so.2 -> libext2fs.so.2.4
libnss_nisplus.so.2 -> libnss_nisplus-2.13.so
libkmod.so.2 -> libkmod.so.2.1.3
ld-linux-armhf.so.3 -> ld-2.13.so
libply-splash-core.so.2 -> libply-splash-core.so.2.1.0
libnss_compat.so.2 -> libnss_compat-2.13.so
libslang.so.2 -> libslang.so.2.2.4
libtinfo.so.5 -> libtinfo.so.5.9
libnss_nis.so.2 -> libnss_nis-2.13.so
libnss_dns.so.2 -> libnss_dns-2.13.so
libc.so.6 -> libc-2.13.so
libblkid.so.1 -> libblkid.so.1.1.0
libutil.so.1 -> libutil-2.13.so
libthread_db.so.1 -> libthread_db-1.0.so
libcidn.so.1 -> libcidn-2.13.so
libe2p.so.2 -> libe2p.so.2.3
libply.so.2 -> libply.so.2.1.0
/usr/lib/arm-linux-gnueabihf:
libpanel.so.5 -> libpanel.so.5.9
libformw.so.5 -> libformw.so.5.9
libsemanage.so.1 -> libsemanage.so.1
libtic.so.5 -> libtic.so.5.9
libustr-1.0.so.1 -> libustr-1.0.so.1.0.4
libmenu.so.5 -> libmenu.so.5.9
libmenuw.so.5 -> libmenuw.so.5.9
libply-boot-client.so.2 -> libply-boot-client.so.2.1.0
libdb-5.1.so -> libdb-5.1.so
libform.so.5 -> libform.so.5.9
libpanelw.so.5 -> libpanelw.so.5.9
/lib:
libnih-dbus.so.1 -> libnih-dbus.so.1.0.0
libnih.so.1 -> libnih.so.1.0.0
/usr/lib:
libperl.so.5.14 -> libperl.so.5.14.2
[SB2 simple armhf] ignite@ignite testing $ g++ new.cpp
[SB2 simple armhf] ignite@ignite testing $ ./a.out
./a.out: error while loading shared libraries: libstdc++.so.6: cannot
open shared object file: No such file or directory
[SB2 simple armhf] ignite@ignite testing $
On Mon, Feb 4, 2013 at 11:36 AM, allan George <gorge.alan.sw@gmail.com> wrote:
> Hi,
>
> I have build my toolchain using following link it have , crosscompiler
> c++ support enabled :-----
> http://www.bootc.net/archives/2012/05/26/how-to-build-a-cross-compiler-for-your-raspberry-pi/
>
>
> Now i am compiling my code in Scratchbox2, c++ code is compiling but
> not able to run it throws this error :-------
> ./a.out: error while loading shared libraries: libstdc++.so
>
>
>
> Compiler version :------------------
> [SB2 simple armhf] ignite@ignite testing $ g++ version
> arm-unknown-linux-gnueabi-g++: error: version: No such file or directory
> arm-unknown-linux-gnueabi-g++: fatal error: no input files
> compilation terminated.
> [SB2 simple armhf] ignite@ignite testing $ g++ --version
> arm-unknown-linux-gnueabi-g++ (crosstool-NG 1.17.0) 4.7.3 20121001 (prerelease)
> Copyright (C) 2012 Free Software Foundation, Inc.
> This is free software; see the source for copying conditions. There is NO
> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>
> compiling successful :---------------
> [SB2 simple armhf] ignite@ignite testing $ g++ new.cpp
>
> output file format :----------------
> [SB2 simple armhf] ignite@ignite testing $ file a.out
> a.out: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically
> linked (uses shared libs), for GNU/Linux 3.6.3, not stripped
>
>
> Error thrown :---------
> [SB2 simple armhf] ignite@ignite testing $ ./a.out
> ./a.out: error while loading shared libraries: libstdc++.so.6: cannot
> open shared object file: No such file or directory
>
>
> Any suggestion why this error is. Please suggest.
>
> Regards,
>
> //Allan
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: error while loading shared libraries: libstdc++.so ------ confused ..???
2013-02-04 8:18 ` allan George
@ 2013-02-04 8:53 ` allan George
2013-02-04 9:31 ` allan George
2013-02-04 16:57 ` Trevor Woerner
1 sibling, 1 reply; 5+ messages in thread
From: allan George @ 2013-02-04 8:53 UTC (permalink / raw)
To: crossgcc
[-- Attachment #1: Type: text/plain, Size: 5719 bytes --]
I have attached my compiler configuration file, for cross-tool ng :----
Any help will be appreciable.
//Allan
On Mon, Feb 4, 2013 at 1:48 PM, allan George <gorge.alan.sw@gmail.com> wrote:
> when i run this command :--------- >>> whereis libstdc++.so
> it shows the library
> [SB2 simple armhf] ignite@ignite testing $ whereis libstdc++.so
> libstdc++:
> [SB2 simple armhf] ignite@ignite testing $
>
>
>
>
>
> Even i run ldconfig -v same error is there :-----
>
> [SB2 simple armhf] ignite@ignite testing $ ldconfig -v
> /home/ignite/sbox2/rootfs/armhf/sbin/ldconfig: Can't open
> configuration file /home/ignite/sbox2/rootfs/armhf/etc/ld.so.conf: No
> such file or directory
> /lib/arm-linux-gnueabihf:
> libpcprofile.so -> libpcprofile.so
> libcrypt.so.1 -> libcrypt-2.13.so
> libdl.so.2 -> libdl-2.13.so
> libSegFault.so -> libSegFault.so
> libmount.so.1 -> libmount.so.1.1.0
> libnsl.so.1 -> libnsl-2.13.so
> libncurses.so.5 -> libncurses.so.5.9
> libmemusage.so -> libmemusage.so
> libpamc.so.0 -> libpamc.so.0.82.1
> libz.so.1 -> libz.so.1.2.7
> libuuid.so.1 -> libuuid.so.1.3.0
> libattr.so.1 -> libattr.so.1.1.0
> libresolv.so.2 -> libresolv-2.13.so
> libncursesw.so.5 -> libncursesw.so.5.9
> libprocps.so.0 -> libprocps.so.0.0.1
> libcom_err.so.2 -> libcom_err.so.2.1
> libsepol.so.1 -> libsepol.so.1
> libbz2.so.1.0 -> libbz2.so.1.0.4
> libnss_files.so.2 -> libnss_files-2.13.so
> libpthread.so.0 -> libpthread-2.13.so
> libss.so.2 -> libss.so.2.0
> libdbus-1.so.3 -> libdbus-1.so.3.7.2
> libacl.so.1 -> libacl.so.1.1.0
> libpam.so.0 -> libpam.so.0.83.0
> libBrokenLocale.so.1 -> libBrokenLocale-2.13.so
> liblzma.so.5 -> liblzma.so.5.0.0
> librt.so.1 -> librt-2.13.so
> libudev.so.0 -> libudev.so.0.13.0
> libgcc_s.so.1 -> libgcc_s.so.1
> libanl.so.1 -> libanl-2.13.so
> libm.so.6 -> libm-2.13.so
> libnss_hesiod.so.2 -> libnss_hesiod-2.13.so
> libselinux.so.1 -> libselinux.so.1
> libpam_misc.so.0 -> libpam_misc.so.0.82.0
> libext2fs.so.2 -> libext2fs.so.2.4
> libnss_nisplus.so.2 -> libnss_nisplus-2.13.so
> libkmod.so.2 -> libkmod.so.2.1.3
> ld-linux-armhf.so.3 -> ld-2.13.so
> libply-splash-core.so.2 -> libply-splash-core.so.2.1.0
> libnss_compat.so.2 -> libnss_compat-2.13.so
> libslang.so.2 -> libslang.so.2.2.4
> libtinfo.so.5 -> libtinfo.so.5.9
> libnss_nis.so.2 -> libnss_nis-2.13.so
> libnss_dns.so.2 -> libnss_dns-2.13.so
> libc.so.6 -> libc-2.13.so
> libblkid.so.1 -> libblkid.so.1.1.0
> libutil.so.1 -> libutil-2.13.so
> libthread_db.so.1 -> libthread_db-1.0.so
> libcidn.so.1 -> libcidn-2.13.so
> libe2p.so.2 -> libe2p.so.2.3
> libply.so.2 -> libply.so.2.1.0
> /usr/lib/arm-linux-gnueabihf:
> libpanel.so.5 -> libpanel.so.5.9
> libformw.so.5 -> libformw.so.5.9
> libsemanage.so.1 -> libsemanage.so.1
> libtic.so.5 -> libtic.so.5.9
> libustr-1.0.so.1 -> libustr-1.0.so.1.0.4
> libmenu.so.5 -> libmenu.so.5.9
> libmenuw.so.5 -> libmenuw.so.5.9
> libply-boot-client.so.2 -> libply-boot-client.so.2.1.0
> libdb-5.1.so -> libdb-5.1.so
> libform.so.5 -> libform.so.5.9
> libpanelw.so.5 -> libpanelw.so.5.9
> /lib:
> libnih-dbus.so.1 -> libnih-dbus.so.1.0.0
> libnih.so.1 -> libnih.so.1.0.0
> /usr/lib:
> libperl.so.5.14 -> libperl.so.5.14.2
> [SB2 simple armhf] ignite@ignite testing $ g++ new.cpp
> [SB2 simple armhf] ignite@ignite testing $ ./a.out
> ./a.out: error while loading shared libraries: libstdc++.so.6: cannot
> open shared object file: No such file or directory
> [SB2 simple armhf] ignite@ignite testing $
>
>
> On Mon, Feb 4, 2013 at 11:36 AM, allan George <gorge.alan.sw@gmail.com> wrote:
>> Hi,
>>
>> I have build my toolchain using following link it have , crosscompiler
>> c++ support enabled :-----
>> http://www.bootc.net/archives/2012/05/26/how-to-build-a-cross-compiler-for-your-raspberry-pi/
>>
>>
>> Now i am compiling my code in Scratchbox2, c++ code is compiling but
>> not able to run it throws this error :-------
>> ./a.out: error while loading shared libraries: libstdc++.so
>>
>>
>>
>> Compiler version :------------------
>> [SB2 simple armhf] ignite@ignite testing $ g++ version
>> arm-unknown-linux-gnueabi-g++: error: version: No such file or directory
>> arm-unknown-linux-gnueabi-g++: fatal error: no input files
>> compilation terminated.
>> [SB2 simple armhf] ignite@ignite testing $ g++ --version
>> arm-unknown-linux-gnueabi-g++ (crosstool-NG 1.17.0) 4.7.3 20121001 (prerelease)
>> Copyright (C) 2012 Free Software Foundation, Inc.
>> This is free software; see the source for copying conditions. There is NO
>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>
>> compiling successful :---------------
>> [SB2 simple armhf] ignite@ignite testing $ g++ new.cpp
>>
>> output file format :----------------
>> [SB2 simple armhf] ignite@ignite testing $ file a.out
>> a.out: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically
>> linked (uses shared libs), for GNU/Linux 3.6.3, not stripped
>>
>>
>> Error thrown :---------
>> [SB2 simple armhf] ignite@ignite testing $ ./a.out
>> ./a.out: error while loading shared libraries: libstdc++.so.6: cannot
>> open shared object file: No such file or directory
>>
>>
>> Any suggestion why this error is. Please suggest.
>>
>> Regards,
>>
>> //Allan
[-- Attachment #2: config.txt --]
[-- Type: text/plain, Size: 12000 bytes --]
#
# Automatically generated make config: don't edit
# crosstool-NG 1.17.0 Configuration
# Mon Feb 4 10:09:28 2013
#
CT_CONFIGURE_has_xz=y
CT_MODULES=y
#
# Paths and misc options
#
#
# crosstool-NG behavior
#
# CT_OBSOLETE is not set
CT_EXPERIMENTAL=y
# CT_DEBUG_CT is not set
#
# Paths
#
CT_LOCAL_TARBALLS_DIR=""
CT_CUSTOM_LOCATION_ROOT_DIR=""
CT_WORK_DIR="${CT_TOP_DIR}/.build"
CT_PREFIX_DIR="/opt/cross/x-tools_4_13_libc/${CT_TARGET}"
CT_INSTALL_DIR="${CT_PREFIX_DIR}"
CT_RM_RF_PREFIX_DIR=y
CT_REMOVE_DOCS=y
CT_INSTALL_DIR_RO=y
CT_STRIP_ALL_TOOLCHAIN_EXECUTABLES=y
#
# Downloading
#
# CT_FORBID_DOWNLOAD is not set
# CT_FORCE_DOWNLOAD is not set
CT_CONNECT_TIMEOUT=10
# CT_ONLY_DOWNLOAD is not set
# CT_USE_MIRROR is not set
#
# Extracting
#
# CT_FORCE_EXTRACT is not set
CT_OVERIDE_CONFIG_GUESS_SUB=y
# CT_ONLY_EXTRACT is not set
CT_PATCH_BUNDLED=y
# CT_PATCH_LOCAL is not set
# CT_PATCH_BUNDLED_LOCAL is not set
# CT_PATCH_LOCAL_BUNDLED is not set
# CT_PATCH_BUNDLED_FALLBACK_LOCAL is not set
# CT_PATCH_LOCAL_FALLBACK_BUNDLED is not set
# CT_PATCH_NONE is not set
CT_PATCH_ORDER="bundled"
#
# Build behavior
#
CT_PARALLEL_JOBS=0
CT_LOAD=0
CT_USE_PIPES=y
CT_EXTRA_FLAGS_FOR_HOST=""
# CT_CONFIG_SHELL_SH is not set
# CT_CONFIG_SHELL_ASH is not set
CT_CONFIG_SHELL_BASH=y
# CT_CONFIG_SHELL_CUSTOM is not set
CT_CONFIG_SHELL="${bash}"
#
# Logging
#
# CT_LOG_ERROR is not set
# CT_LOG_WARN is not set
CT_LOG_INFO=y
# CT_LOG_EXTRA is not set
# CT_LOG_ALL is not set
# CT_LOG_DEBUG is not set
CT_LOG_LEVEL_MAX="INFO"
# CT_LOG_SEE_TOOLS_WARN is not set
CT_LOG_PROGRESS_BAR=y
CT_LOG_TO_FILE=y
CT_LOG_FILE_COMPRESS=y
#
# Target options
#
CT_ARCH="arm"
CT_ARCH_SUPPORTS_BOTH_MMU=y
CT_ARCH_SUPPORTS_BOTH_ENDIAN=y
CT_ARCH_SUPPORTS_32=y
CT_ARCH_SUPPORTS_WITH_ARCH=y
CT_ARCH_SUPPORTS_WITH_CPU=y
CT_ARCH_SUPPORTS_WITH_TUNE=y
CT_ARCH_SUPPORTS_WITH_FLOAT=y
CT_ARCH_SUPPORTS_WITH_FPU=y
CT_ARCH_SUPPORTS_SOFTFP=y
CT_ARCH_DEFAULT_HAS_MMU=y
CT_ARCH_DEFAULT_LE=y
CT_ARCH_DEFAULT_32=y
CT_ARCH_ARCH="armv6zk"
CT_ARCH_CPU="arm1176jzf-s"
CT_ARCH_TUNE="arm1176jzf-s"
CT_ARCH_FPU="vfp"
# CT_ARCH_BE is not set
CT_ARCH_LE=y
CT_ARCH_32=y
CT_ARCH_BITNESS=32
CT_ARCH_FLOAT_HW=y
# CT_ARCH_FLOAT_SW is not set
CT_TARGET_CFLAGS=""
CT_TARGET_LDFLAGS=""
# CT_ARCH_alpha is not set
CT_ARCH_arm=y
# CT_ARCH_avr32 is not set
# CT_ARCH_blackfin is not set
# CT_ARCH_m68k is not set
# CT_ARCH_microblaze is not set
# CT_ARCH_mips is not set
# CT_ARCH_powerpc is not set
# CT_ARCH_s390 is not set
# CT_ARCH_sh is not set
# CT_ARCH_sparc is not set
# CT_ARCH_x86 is not set
CT_ARCH_alpha_AVAILABLE=y
CT_ARCH_arm_AVAILABLE=y
CT_ARCH_avr32_AVAILABLE=y
CT_ARCH_blackfin_AVAILABLE=y
CT_ARCH_m68k_AVAILABLE=y
CT_ARCH_microblaze_AVAILABLE=y
CT_ARCH_mips_AVAILABLE=y
CT_ARCH_powerpc_AVAILABLE=y
CT_ARCH_s390_AVAILABLE=y
CT_ARCH_sh_AVAILABLE=y
CT_ARCH_sparc_AVAILABLE=y
CT_ARCH_x86_AVAILABLE=y
#
# Generic target options
#
# CT_MULTILIB is not set
CT_ARCH_USE_MMU=y
CT_ARCH_ENDIAN="little"
#
# Target optimisations
#
# CT_ARCH_FLOAT_SOFTFP is not set
CT_ARCH_FLOAT="hard"
#
# arm other options
#
CT_ARCH_ARM_MODE="arm"
CT_ARCH_ARM_MODE_ARM=y
# CT_ARCH_ARM_MODE_THUMB is not set
# CT_ARCH_ARM_INTERWORKING is not set
CT_ARCH_ARM_EABI=y
#
# Toolchain options
#
#
# General toolchain options
#
CT_FORCE_SYSROOT=y
CT_USE_SYSROOT=y
CT_SYSROOT_NAME="sysroot"
CT_SYSROOT_DIR_PREFIX=""
CT_WANTS_STATIC_LINK=y
# CT_STATIC_TOOLCHAIN is not set
CT_TOOLCHAIN_PKGVERSION=""
CT_TOOLCHAIN_BUGURL=""
#
# Tuple completion and aliasing
#
CT_TARGET_VENDOR="unknown"
CT_TARGET_ALIAS_SED_EXPR=""
CT_TARGET_ALIAS=""
#
# Toolchain type
#
# CT_NATIVE is not set
CT_CROSS=y
# CT_CROSS_NATIVE is not set
# CT_CANADIAN is not set
CT_TOOLCHAIN_TYPE="cross"
#
# Build system
#
CT_BUILD=""
CT_BUILD_PREFIX=""
CT_BUILD_SUFFIX=""
#
# Misc options
#
# CT_TOOLCHAIN_ENABLE_NLS is not set
#
# Operating System
#
CT_KERNEL_SUPPORTS_SHARED_LIBS=y
CT_KERNEL="linux"
CT_KERNEL_VERSION="3.6.3"
# CT_KERNEL_bare_metal is not set
CT_KERNEL_linux=y
CT_KERNEL_bare_metal_AVAILABLE=y
CT_KERNEL_linux_AVAILABLE=y
CT_KERNEL_V_3_6_3=y
# CT_KERNEL_V_3_6_2 is not set
# CT_KERNEL_V_3_6_1 is not set
# CT_KERNEL_V_3_6 is not set
# CT_KERNEL_V_3_5_7 is not set
# CT_KERNEL_V_3_4_15 is not set
# CT_KERNEL_V_3_3_8 is not set
# CT_KERNEL_V_3_2_32 is not set
# CT_KERNEL_V_3_1_10 is not set
# CT_KERNEL_V_3_0_48 is not set
# CT_KERNEL_V_2_6_39_4 is not set
# CT_KERNEL_V_2_6_38_8 is not set
# CT_KERNEL_V_2_6_37_6 is not set
# CT_KERNEL_V_2_6_36_4 is not set
# CT_KERNEL_V_2_6_33_20 is not set
# CT_KERNEL_V_2_6_32_60 is not set
# CT_KERNEL_V_2_6_31_14 is not set
# CT_KERNEL_V_2_6_27_62 is not set
# CT_KERNEL_LINUX_CUSTOM is not set
CT_KERNEL_mingw32_AVAILABLE=y
#
# Common kernel options
#
CT_SHARED_LIBS=y
#
# linux other options
#
CT_KERNEL_LINUX_VERBOSITY_0=y
# CT_KERNEL_LINUX_VERBOSITY_1 is not set
# CT_KERNEL_LINUX_VERBOSITY_2 is not set
CT_KERNEL_LINUX_VERBOSE_LEVEL=0
CT_KERNEL_LINUX_INSTALL_CHECK=y
#
# Binary utilities
#
CT_ARCH_BINFMT_ELF=y
#
# GNU binutils
#
# CT_BINUTILS_V_2_22 is not set
# CT_BINUTILS_V_2_21_53 is not set
CT_BINUTILS_V_2_21_1a=y
# CT_BINUTILS_V_2_20_1a is not set
# CT_BINUTILS_V_2_19_1a is not set
# CT_BINUTILS_V_2_18a is not set
# CT_BINUTILS_CUSTOM is not set
CT_BINUTILS_VERSION="2.21.1a"
CT_BINUTILS_2_21_or_later=y
CT_BINUTILS_2_20_or_later=y
CT_BINUTILS_2_19_or_later=y
CT_BINUTILS_2_18_or_later=y
CT_BINUTILS_HAS_HASH_STYLE=y
CT_BINUTILS_HAS_GOLD=y
CT_BINUTILS_GOLD_SUPPORTS_ARCH=y
CT_BINUTILS_HAS_PLUGINS=y
CT_BINUTILS_HAS_PKGVERSION_BUGURL=y
CT_BINUTILS_FORCE_LD_BFD=y
CT_BINUTILS_LINKER_LD=y
# CT_BINUTILS_LINKER_LD_GOLD is not set
# CT_BINUTILS_LINKER_GOLD_LD is not set
CT_BINUTILS_LINKERS_LIST="ld"
CT_BINUTILS_LINKER_DEFAULT="bfd"
# CT_BINUTILS_PLUGINS is not set
CT_BINUTILS_EXTRA_CONFIG_ARRAY=""
# CT_BINUTILS_FOR_TARGET is not set
#
# C compiler
#
CT_CC="gcc"
CT_CC_VERSION="linaro-4.7-2012.10"
CT_CC_gcc=y
CT_CC_GCC_SHOW_LINARO=y
CT_CC_V_linaro_4_7_2012_10=y
# CT_CC_V_4_7_2 is not set
# CT_CC_V_4_7_1 is not set
# CT_CC_V_4_7_0 is not set
# CT_CC_V_linaro_4_6_2012_10 is not set
# CT_CC_V_4_6_3 is not set
# CT_CC_V_4_6_2 is not set
# CT_CC_V_4_6_1 is not set
# CT_CC_V_4_6_0 is not set
# CT_CC_V_linaro_4_5_2012_03 is not set
# CT_CC_V_4_5_3 is not set
# CT_CC_V_4_5_2 is not set
# CT_CC_V_4_5_1 is not set
# CT_CC_V_4_5_0 is not set
# CT_CC_V_linaro_4_4_2011_02_0 is not set
# CT_CC_V_4_4_7 is not set
# CT_CC_V_4_4_6 is not set
# CT_CC_V_4_4_5 is not set
# CT_CC_V_4_4_4 is not set
# CT_CC_V_4_4_3 is not set
# CT_CC_V_4_4_2 is not set
# CT_CC_V_4_4_1 is not set
# CT_CC_V_4_4_0 is not set
# CT_CC_V_4_3_6 is not set
# CT_CC_V_4_3_5 is not set
# CT_CC_V_4_3_4 is not set
# CT_CC_V_4_3_3 is not set
# CT_CC_V_4_3_2 is not set
# CT_CC_V_4_3_1 is not set
# CT_CC_V_4_2_4 is not set
# CT_CC_V_4_2_2 is not set
# CT_CC_CUSTOM is not set
CT_CC_GCC_4_2_or_later=y
CT_CC_GCC_4_3_or_later=y
CT_CC_GCC_4_4_or_later=y
CT_CC_GCC_4_5_or_later=y
CT_CC_GCC_4_6_or_later=y
CT_CC_GCC_4_7=y
CT_CC_GCC_4_7_or_later=y
CT_CC_GCC_HAS_GRAPHITE=y
CT_CC_GCC_HAS_LTO=y
CT_CC_GCC_HAS_PKGVERSION_BUGURL=y
CT_CC_GCC_HAS_BUILD_ID=y
CT_CC_GCC_HAS_LNK_HASH_STYLE=y
CT_CC_GCC_USE_GMP_MPFR=y
CT_CC_GCC_USE_PPL_CLOOG=y
CT_CC_GCC_USE_MPC=y
CT_CC_GCC_HAS_LIBQUADMATH=y
# CT_CC_LANG_FORTRAN is not set
CT_CC_SUPPORT_CXX=y
CT_CC_SUPPORT_FORTRAN=y
CT_CC_SUPPORT_JAVA=y
CT_CC_SUPPORT_ADA=y
CT_CC_SUPPORT_OBJC=y
CT_CC_SUPPORT_OBJCXX=y
#
# Additional supported languages:
#
CT_CC_LANG_CXX=y
# CT_CC_LANG_JAVA is not set
# CT_CC_LANG_ADA is not set
# CT_CC_LANG_OBJC is not set
# CT_CC_LANG_OBJCXX is not set
CT_CC_LANG_OTHERS=""
#
# gcc other options
#
CT_CC_ENABLE_CXX_FLAGS=""
CT_CC_CORE_EXTRA_CONFIG_ARRAY=""
CT_CC_EXTRA_CONFIG_ARRAY=""
CT_CC_STATIC_LIBSTDCXX=y
# CT_CC_GCC_SYSTEM_ZLIB is not set
#
# Optimisation features
#
CT_CC_GCC_USE_GRAPHITE=y
CT_CC_GCC_USE_LTO=y
#
# Settings for libraries running on target
#
CT_CC_GCC_ENABLE_TARGET_OPTSPACE=y
# CT_CC_GCC_LIBMUDFLAP is not set
# CT_CC_GCC_LIBGOMP is not set
# CT_CC_GCC_LIBSSP is not set
# CT_CC_GCC_LIBQUADMATH is not set
#
# Misc. obscure options.
#
CT_CC_CXA_ATEXIT=y
# CT_CC_GCC_DISABLE_PCH is not set
CT_CC_GCC_SJLJ_EXCEPTIONS=m
CT_CC_GCC_LDBL_128=m
# CT_CC_GCC_BUILD_ID is not set
CT_CC_GCC_LNK_HASH_STYLE_DEFAULT=y
# CT_CC_GCC_LNK_HASH_STYLE_SYSV is not set
# CT_CC_GCC_LNK_HASH_STYLE_GNU is not set
# CT_CC_GCC_LNK_HASH_STYLE_BOTH is not set
CT_CC_GCC_LNK_HASH_STYLE=""
#
# C-library
#
CT_LIBC="eglibc"
CT_LIBC_VERSION="2_13"
CT_LIBC_eglibc=y
# CT_LIBC_glibc is not set
# CT_LIBC_uClibc is not set
CT_LIBC_eglibc_AVAILABLE=y
# CT_LIBC_EGLIBC_V_2_16 is not set
# CT_LIBC_EGLIBC_V_2_15 is not set
# CT_LIBC_EGLIBC_V_2_14 is not set
CT_LIBC_EGLIBC_V_2_13=y
# CT_LIBC_EGLIBC_V_2_12 is not set
# CT_LIBC_EGLIBC_V_2_11 is not set
# CT_LIBC_EGLIBC_V_2_10 is not set
# CT_LIBC_EGLIBC_V_2_9 is not set
# CT_LIBC_EGLIBC_V_TRUNK is not set
CT_LIBC_EGLIBC_2_13_or_later=y
CT_LIBC_EGLIBC_2_12_or_later=y
CT_LIBC_EGLIBC_2_11_or_later=y
CT_LIBC_EGLIBC_2_10_or_later=y
CT_LIBC_EGLIBC_2_9_or_later=y
CT_LIBC_EGLIBC_HAS_PKGVERSION_BUGURL=y
#
# svn is missing. You'll have to either:
#
#
# - have a pre-downloaded local tarball
#
#
# - or have a LAN mirror with a pre-downloaded tarball
#
#
# otherwise you won't be able to download eglibc
#
# CT_EGLIBC_OPT_SIZE is not set
# CT_EGLIBC_CUSTOM_CONFIG is not set
CT_LIBC_glibc_AVAILABLE=y
CT_LIBC_mingw_AVAILABLE=y
CT_LIBC_newlib_AVAILABLE=y
CT_LIBC_none_AVAILABLE=y
CT_LIBC_uClibc_AVAILABLE=y
CT_LIBC_SUPPORT_THREADS_ANY=y
CT_LIBC_SUPPORT_NPTL=y
CT_LIBC_SUPPORT_LINUXTHREADS=y
CT_THREADS="nptl"
#
# Common C library options
#
CT_THREADS_NPTL=y
# CT_THREADS_LINUXTHREADS is not set
CT_LIBC_XLDD=y
#
# eglibc other options
#
CT_LIBC_GLIBC_MAY_FORCE_PORTS=y
CT_LIBC_glibc_familly=y
CT_LIBC_GLIBC_EXTRA_CONFIG_ARRAY=""
CT_LIBC_GLIBC_CONFIGPARMS=""
CT_LIBC_GLIBC_EXTRA_CFLAGS=""
CT_LIBC_EXTRA_CC_ARGS=""
# CT_LIBC_ENABLE_FORTIFIED_BUILD is not set
# CT_LIBC_DISABLE_VERSIONING is not set
CT_LIBC_OLDEST_ABI=""
CT_LIBC_GLIBC_FORCE_UNWIND=y
CT_LIBC_GLIBC_USE_PORTS=y
CT_LIBC_ADDONS_LIST=""
#
# WARNING !!!
#
#
# For glibc >= 2.8, it can happen that the tarballs
#
#
# for the addons are not available for download.
#
#
# If that happens, bad luck... Try a previous version
#
#
# or try again later... :-(
#
# CT_LIBC_LOCALES is not set
# CT_LIBC_GLIBC_KERNEL_VERSION_NONE is not set
CT_LIBC_GLIBC_KERNEL_VERSION_AS_HEADERS=y
# CT_LIBC_GLIBC_KERNEL_VERSION_CHOSEN is not set
CT_LIBC_GLIBC_MIN_KERNEL="3.6.3"
#
# Debug facilities
#
# CT_DEBUG_dmalloc is not set
# CT_DEBUG_duma is not set
# CT_DEBUG_gdb is not set
# CT_DEBUG_ltrace is not set
# CT_DEBUG_strace is not set
#
# Companion libraries
#
CT_COMPLIBS_NEEDED=y
CT_GMP_NEEDED=y
CT_MPFR_NEEDED=y
CT_PPL_NEEDED=y
CT_CLOOG_NEEDED=y
CT_MPC_NEEDED=y
CT_COMPLIBS=y
CT_GMP=y
CT_MPFR=y
CT_PPL=y
CT_CLOOG=y
CT_MPC=y
CT_GMP_V_5_0_2=y
# CT_GMP_V_5_0_1 is not set
# CT_GMP_V_4_3_2 is not set
# CT_GMP_V_4_3_1 is not set
# CT_GMP_V_4_3_0 is not set
CT_GMP_VERSION="5.0.2"
CT_MPFR_V_3_1_0=y
# CT_MPFR_V_3_0_1 is not set
# CT_MPFR_V_3_0_0 is not set
# CT_MPFR_V_2_4_2 is not set
# CT_MPFR_V_2_4_1 is not set
# CT_MPFR_V_2_4_0 is not set
CT_MPFR_VERSION="3.1.0"
CT_PPL_V_0_11_2=y
# CT_PPL_V_0_11_1 is not set
# CT_PPL_V_0_11 is not set
# CT_PPL_V_0_10_2 is not set
CT_PPL_VERSION="0.11.2"
CT_PPL_0_11=y
CT_PPL_NEEDS_LIBPWL=y
CT_CLOOG_V_0_15_11=y
# CT_CLOOG_V_0_15_10 is not set
# CT_CLOOG_V_0_15_9 is not set
# CT_CLOOG_V_0_15_8 is not set
# CT_CLOOG_V_0_15_7 is not set
# CT_CLOOG_V_0_15_6 is not set
CT_CLOOG_VERSION="0.15.11"
CT_CLOOG_0_15_1x=y
CT_CLOOG_NEEDS_AUTORECONF=y
CT_MPC_V_0_9=y
# CT_MPC_V_0_8_2 is not set
# CT_MPC_V_0_8_1 is not set
# CT_MPC_V_0_7 is not set
CT_MPC_VERSION="0.9"
#
# Companion libraries common options
#
# CT_COMPLIBS_CHECK is not set
#
# Companion tools
#
#
# READ HELP before you say 'Y' below !!!
#
# CT_COMP_TOOLS is not set
#
# Test suite
#
# CT_TEST_SUITE_GCC is not set
[-- Attachment #3: Type: text/plain, Size: 71 bytes --]
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: error while loading shared libraries: libstdc++.so ------ confused ..???
2013-02-04 8:53 ` allan George
@ 2013-02-04 9:31 ` allan George
0 siblings, 0 replies; 5+ messages in thread
From: allan George @ 2013-02-04 9:31 UTC (permalink / raw)
To: crossgcc
I have added raspbian image like this :-----
sudo debootstrap --verbose --arch armhf --foreign wheezy \
$HOME/sbox2/rootfs/armhf http://archive.raspbian.org/raspbian/
Key add :--
http://www.raspbian.org/RaspbianRepository
wget http://archive.raspbian.org/raspbian.public.key -O - | sudo apt-key add -
//Allan
On Mon, Feb 4, 2013 at 2:22 PM, allan George <gorge.alan.sw@gmail.com> wrote:
> I have attached my compiler configuration file, for cross-tool ng :----
>
> Any help will be appreciable.
>
> //Allan
>
> On Mon, Feb 4, 2013 at 1:48 PM, allan George <gorge.alan.sw@gmail.com> wrote:
>> when i run this command :--------- >>> whereis libstdc++.so
>> it shows the library
>> [SB2 simple armhf] ignite@ignite testing $ whereis libstdc++.so
>> libstdc++:
>> [SB2 simple armhf] ignite@ignite testing $
>>
>>
>>
>>
>>
>> Even i run ldconfig -v same error is there :-----
>>
>> [SB2 simple armhf] ignite@ignite testing $ ldconfig -v
>> /home/ignite/sbox2/rootfs/armhf/sbin/ldconfig: Can't open
>> configuration file /home/ignite/sbox2/rootfs/armhf/etc/ld.so.conf: No
>> such file or directory
>> /lib/arm-linux-gnueabihf:
>> libpcprofile.so -> libpcprofile.so
>> libcrypt.so.1 -> libcrypt-2.13.so
>> libdl.so.2 -> libdl-2.13.so
>> libSegFault.so -> libSegFault.so
>> libmount.so.1 -> libmount.so.1.1.0
>> libnsl.so.1 -> libnsl-2.13.so
>> libncurses.so.5 -> libncurses.so.5.9
>> libmemusage.so -> libmemusage.so
>> libpamc.so.0 -> libpamc.so.0.82.1
>> libz.so.1 -> libz.so.1.2.7
>> libuuid.so.1 -> libuuid.so.1.3.0
>> libattr.so.1 -> libattr.so.1.1.0
>> libresolv.so.2 -> libresolv-2.13.so
>> libncursesw.so.5 -> libncursesw.so.5.9
>> libprocps.so.0 -> libprocps.so.0.0.1
>> libcom_err.so.2 -> libcom_err.so.2.1
>> libsepol.so.1 -> libsepol.so.1
>> libbz2.so.1.0 -> libbz2.so.1.0.4
>> libnss_files.so.2 -> libnss_files-2.13.so
>> libpthread.so.0 -> libpthread-2.13.so
>> libss.so.2 -> libss.so.2.0
>> libdbus-1.so.3 -> libdbus-1.so.3.7.2
>> libacl.so.1 -> libacl.so.1.1.0
>> libpam.so.0 -> libpam.so.0.83.0
>> libBrokenLocale.so.1 -> libBrokenLocale-2.13.so
>> liblzma.so.5 -> liblzma.so.5.0.0
>> librt.so.1 -> librt-2.13.so
>> libudev.so.0 -> libudev.so.0.13.0
>> libgcc_s.so.1 -> libgcc_s.so.1
>> libanl.so.1 -> libanl-2.13.so
>> libm.so.6 -> libm-2.13.so
>> libnss_hesiod.so.2 -> libnss_hesiod-2.13.so
>> libselinux.so.1 -> libselinux.so.1
>> libpam_misc.so.0 -> libpam_misc.so.0.82.0
>> libext2fs.so.2 -> libext2fs.so.2.4
>> libnss_nisplus.so.2 -> libnss_nisplus-2.13.so
>> libkmod.so.2 -> libkmod.so.2.1.3
>> ld-linux-armhf.so.3 -> ld-2.13.so
>> libply-splash-core.so.2 -> libply-splash-core.so.2.1.0
>> libnss_compat.so.2 -> libnss_compat-2.13.so
>> libslang.so.2 -> libslang.so.2.2.4
>> libtinfo.so.5 -> libtinfo.so.5.9
>> libnss_nis.so.2 -> libnss_nis-2.13.so
>> libnss_dns.so.2 -> libnss_dns-2.13.so
>> libc.so.6 -> libc-2.13.so
>> libblkid.so.1 -> libblkid.so.1.1.0
>> libutil.so.1 -> libutil-2.13.so
>> libthread_db.so.1 -> libthread_db-1.0.so
>> libcidn.so.1 -> libcidn-2.13.so
>> libe2p.so.2 -> libe2p.so.2.3
>> libply.so.2 -> libply.so.2.1.0
>> /usr/lib/arm-linux-gnueabihf:
>> libpanel.so.5 -> libpanel.so.5.9
>> libformw.so.5 -> libformw.so.5.9
>> libsemanage.so.1 -> libsemanage.so.1
>> libtic.so.5 -> libtic.so.5.9
>> libustr-1.0.so.1 -> libustr-1.0.so.1.0.4
>> libmenu.so.5 -> libmenu.so.5.9
>> libmenuw.so.5 -> libmenuw.so.5.9
>> libply-boot-client.so.2 -> libply-boot-client.so.2.1.0
>> libdb-5.1.so -> libdb-5.1.so
>> libform.so.5 -> libform.so.5.9
>> libpanelw.so.5 -> libpanelw.so.5.9
>> /lib:
>> libnih-dbus.so.1 -> libnih-dbus.so.1.0.0
>> libnih.so.1 -> libnih.so.1.0.0
>> /usr/lib:
>> libperl.so.5.14 -> libperl.so.5.14.2
>> [SB2 simple armhf] ignite@ignite testing $ g++ new.cpp
>> [SB2 simple armhf] ignite@ignite testing $ ./a.out
>> ./a.out: error while loading shared libraries: libstdc++.so.6: cannot
>> open shared object file: No such file or directory
>> [SB2 simple armhf] ignite@ignite testing $
>>
>>
>> On Mon, Feb 4, 2013 at 11:36 AM, allan George <gorge.alan.sw@gmail.com> wrote:
>>> Hi,
>>>
>>> I have build my toolchain using following link it have , crosscompiler
>>> c++ support enabled :-----
>>> http://www.bootc.net/archives/2012/05/26/how-to-build-a-cross-compiler-for-your-raspberry-pi/
>>>
>>>
>>> Now i am compiling my code in Scratchbox2, c++ code is compiling but
>>> not able to run it throws this error :-------
>>> ./a.out: error while loading shared libraries: libstdc++.so
>>>
>>>
>>>
>>> Compiler version :------------------
>>> [SB2 simple armhf] ignite@ignite testing $ g++ version
>>> arm-unknown-linux-gnueabi-g++: error: version: No such file or directory
>>> arm-unknown-linux-gnueabi-g++: fatal error: no input files
>>> compilation terminated.
>>> [SB2 simple armhf] ignite@ignite testing $ g++ --version
>>> arm-unknown-linux-gnueabi-g++ (crosstool-NG 1.17.0) 4.7.3 20121001 (prerelease)
>>> Copyright (C) 2012 Free Software Foundation, Inc.
>>> This is free software; see the source for copying conditions. There is NO
>>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
>>>
>>> compiling successful :---------------
>>> [SB2 simple armhf] ignite@ignite testing $ g++ new.cpp
>>>
>>> output file format :----------------
>>> [SB2 simple armhf] ignite@ignite testing $ file a.out
>>> a.out: ELF 32-bit LSB executable, ARM, version 1 (SYSV), dynamically
>>> linked (uses shared libs), for GNU/Linux 3.6.3, not stripped
>>>
>>>
>>> Error thrown :---------
>>> [SB2 simple armhf] ignite@ignite testing $ ./a.out
>>> ./a.out: error while loading shared libraries: libstdc++.so.6: cannot
>>> open shared object file: No such file or directory
>>>
>>>
>>> Any suggestion why this error is. Please suggest.
>>>
>>> Regards,
>>>
>>> //Allan
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: error while loading shared libraries: libstdc++.so ------ confused ..???
2013-02-04 8:18 ` allan George
2013-02-04 8:53 ` allan George
@ 2013-02-04 16:57 ` Trevor Woerner
1 sibling, 0 replies; 5+ messages in thread
From: Trevor Woerner @ 2013-02-04 16:57 UTC (permalink / raw)
To: allan George; +Cc: crossgcc
On Mon, Feb 4, 2013 at 3:18 AM, allan George <gorge.alan.sw@gmail.com> wrote:
> when i run this command :--------- >>> whereis libstdc++.so
> it shows the library
> [SB2 simple armhf] ignite@ignite testing $ whereis libstdc++.so
> libstdc++:
The result of this test demonstrates the 'whereis' command has not
found your library.
For example:
$ whereis bash
bash: /bin/bash /etc/bash.bashrc /usr/share/bash /usr/share/man/man1/bash.1.gz
This demonstrates the 'whereis' utility finding what I'm looking for. Whereas:
$ whereis blah
blah:
...is an example of it not finding what I'm looking for (which looks
like the output you received when you ran this test).
> Even i run ldconfig -v same error is there :-----
When I look through the list of DSOs that 'ldconfig' can find on your
system I don't see the C++ shared object in the list.
It doesn't appear as though your c++ shared object is in your target
filesystem. Confirm this required library is in your target
filesystem, preferably in a common location such as /lib or /usr/lib.
--
For unsubscribe information see http://sourceware.org/lists.html#faq
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2013-02-04 16:57 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CAB94n=cPtV=qt=FBVcAxwu945vMEQ7nERRSMdKAfdq6vUOG1Dg@mail.gmail.com>
2013-02-04 6:06 ` error while loading shared libraries: libstdc++.so ------ confused ..??? allan George
2013-02-04 8:18 ` allan George
2013-02-04 8:53 ` allan George
2013-02-04 9:31 ` allan George
2013-02-04 16:57 ` Trevor Woerner
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).