* [ITP] bind-9.6.0-1 @ 2009-01-18 22:05 Yaakov (Cygwin/X) 2009-01-19 3:54 ` Christopher Faylor 2009-01-21 16:51 ` Andrew Schulman 0 siblings, 2 replies; 17+ messages in thread From: Yaakov (Cygwin/X) @ 2009-01-18 22:05 UTC (permalink / raw) To: cygwin-apps -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 This is quickly becoming a FAQ, so: ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/bind-9.6.0-1-src.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/bind-9.6.0-1.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libbind9-devel/libbind9-devel-9.6.0-1.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libbind9-devel/setup.hint ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libbind9_50/libbind9_50-9.6.0-1.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libbind9_50/setup.hint ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libdns-devel/libdns-devel-9.6.0-1.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libdns-devel/setup.hint ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libdns50/libdns50-9.6.0-1.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libdns50/setup.hint ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libisc-devel/libisc-devel-9.6.0-1.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libisc-devel/setup.hint ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libisc50/libisc50-9.6.0-1.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libisc50/setup.hint ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libisccc-devel/libisccc-devel-9.6.0-1.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libisccc-devel/setup.hint ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libisccc50/libisccc50-9.6.0-1.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libisccc50/setup.hint ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libisccfg-devel/libisccfg-devel-9.6.0-1.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libisccfg-devel/setup.hint ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libisccfg50/libisccfg50-9.6.0-1.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/libisccfg50/setup.hint ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/liblwres-devel/liblwres-devel-9.6.0-1.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/liblwres-devel/setup.hint ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/liblwres50/liblwres50-9.6.0-1.tar.bz2 ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/liblwres50/setup.hint ftp://ftp.cygwinports.org/pub/cygwinports/release/bind/setup.hint Yaakov -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (Cygwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEAREIAAYFAklzp6gACgkQpiWmPGlmQSPGtwCg5tclYcnXDQQx32zlAjFeHJpV dCYAn2JXu04VcpkFz2FDGO9GMeZxVrR5 =6hR4 -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-18 22:05 [ITP] bind-9.6.0-1 Yaakov (Cygwin/X) @ 2009-01-19 3:54 ` Christopher Faylor 2009-01-19 10:32 ` Corinna Vinschen 2009-01-21 16:51 ` Andrew Schulman 1 sibling, 1 reply; 17+ messages in thread From: Christopher Faylor @ 2009-01-19 3:54 UTC (permalink / raw) To: cygwin-apps Woo hoo! Thanks Yaakov! cgf ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-19 3:54 ` Christopher Faylor @ 2009-01-19 10:32 ` Corinna Vinschen 0 siblings, 0 replies; 17+ messages in thread From: Corinna Vinschen @ 2009-01-19 10:32 UTC (permalink / raw) To: cygwin-apps On Jan 18 22:54, Christopher Faylor wrote: > > Woo hoo! > > Thanks Yaakov! Indeed. Just go ahead, Yaakov. Thanks, Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Project Co-Leader cygwin AT cygwin DOT com Red Hat ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-18 22:05 [ITP] bind-9.6.0-1 Yaakov (Cygwin/X) 2009-01-19 3:54 ` Christopher Faylor @ 2009-01-21 16:51 ` Andrew Schulman 2009-01-21 17:08 ` Corinna Vinschen 2009-01-21 17:08 ` Yaakov (Cygwin/X) 1 sibling, 2 replies; 17+ messages in thread From: Andrew Schulman @ 2009-01-21 16:51 UTC (permalink / raw) To: cygwin-apps A request: I think a lot of people would find it useful if you were to split out the client tools, in particular 'host', from the bind server package. I don't want to run a DNS server-- I just want to be able to use the 'host' command. Thanks, Andrew. ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-21 16:51 ` Andrew Schulman @ 2009-01-21 17:08 ` Corinna Vinschen 2009-01-21 17:20 ` Yaakov (Cygwin/X) 2009-01-21 17:08 ` Yaakov (Cygwin/X) 1 sibling, 1 reply; 17+ messages in thread From: Corinna Vinschen @ 2009-01-21 17:08 UTC (permalink / raw) To: cygwin-apps On Jan 21 11:51, Andrew Schulman wrote: > A request: I think a lot of people would find it useful if you were to split > out the client tools, in particular 'host', from the bind server package. I > don't want to run a DNS server-- I just want to be able to use the 'host' > command. Thanks, Andrew. And here's another problem, Yaakov. Why does the bind package require an /etc/resolv.conf file? Isn't that used only by the resolver lib? And the resolver lib is part of Cygwin 1.7 anyway, or in the minires package for Cygwin 1.5. Minires/Cygwin 1.7 don't need a resolv.conf file, so why does bind?!? Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Project Co-Leader cygwin AT cygwin DOT com Red Hat ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-21 17:08 ` Corinna Vinschen @ 2009-01-21 17:20 ` Yaakov (Cygwin/X) 2009-01-21 17:38 ` Corinna Vinschen 0 siblings, 1 reply; 17+ messages in thread From: Yaakov (Cygwin/X) @ 2009-01-21 17:20 UTC (permalink / raw) To: cygwin-apps -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Corinna Vinschen wrote: > And here's another problem, Yaakov. > > Why does the bind package require an /etc/resolv.conf file? Isn't that > used only by the resolver lib? And the resolver lib is part of Cygwin > 1.7 anyway, or in the minires package for Cygwin 1.5. Minires/Cygwin 1.7 > don't need a resolv.conf file, so why does bind?!? I was attempting to avoid a FAQ. BIND is a DNS suite, and it needs to know the address of a nameserver in order to do lookups. The usage of /etc/resolv.conf is well documented in both the manpages and the online manual. Yaakov -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (Cygwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEAREIAAYFAkl3WU4ACgkQpiWmPGlmQSNXyQCfXEFPRiLslEh0fwggqgZo7RKO jNoAnAgTDGVHiR4Bgoavl5EEaYpO215X =RCY6 -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-21 17:20 ` Yaakov (Cygwin/X) @ 2009-01-21 17:38 ` Corinna Vinschen 2009-01-21 17:58 ` Yaakov (Cygwin/X) 2009-01-22 2:26 ` Pierre A. Humblet 0 siblings, 2 replies; 17+ messages in thread From: Corinna Vinschen @ 2009-01-21 17:38 UTC (permalink / raw) To: cygwin-apps On Jan 21 11:20, Yaakov (Cygwin/X) wrote: > Corinna Vinschen wrote: > > Why does the bind package require an /etc/resolv.conf file? Isn't that > > used only by the resolver lib? And the resolver lib is part of Cygwin > > 1.7 anyway, or in the minires package for Cygwin 1.5. Minires/Cygwin 1.7 > > don't need a resolv.conf file, so why does bind?!? > > I was attempting to avoid a FAQ. BIND is a DNS suite, and it needs to > know the address of a nameserver in order to do lookups. The usage of > /etc/resolv.conf is well documented in both the manpages and the online > manual. Ok, but the Cygwin resolver lib also works without this file because the nameserver information can be (and is) fetched from Windows. Would it be feasible to use the same method as the resolver lib so that we don't have two libs using different methods? The resolver lib uses /etc/resolv.conf, but falls back to calling the Windows function GetNetworkParam to fetch this information if the resolve.conf file doesn't exist(*). Corinna (*) On NT4 the GetNetworkParam function is missing so the resolver checks the registry directly, but given the age of NT4 I wouldn't be too concerned... -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Project Co-Leader cygwin AT cygwin DOT com Red Hat ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-21 17:38 ` Corinna Vinschen @ 2009-01-21 17:58 ` Yaakov (Cygwin/X) 2009-01-21 18:24 ` Corinna Vinschen 2009-01-22 2:26 ` Pierre A. Humblet 1 sibling, 1 reply; 17+ messages in thread From: Yaakov (Cygwin/X) @ 2009-01-21 17:58 UTC (permalink / raw) To: cygwin-apps -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Corinna Vinschen wrote: > Ok, but the Cygwin resolver lib also works without this file because the > nameserver information can be (and is) fetched from Windows. Would it > be feasible to use the same method as the resolver lib so that we don't > have two libs using different methods? The resolver lib uses > /etc/resolv.conf, but falls back to calling the Windows function > GetNetworkParam to fetch this information if the resolve.conf file > doesn't exist(*). BIND does not use libresolv/minires, it uses its own code (in liblwres) for parsing /etc/resolv.conf and doing the actual resolver operations. Yaakov -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (Cygwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEAREIAAYFAkl3YicACgkQpiWmPGlmQSMTEQCdEHXZa8UFlHyVAKfioOMQt3w7 8X8AoJTjPNzTtCHUYEdZ9DzFHi3DDlCF =Rmrf -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-21 17:58 ` Yaakov (Cygwin/X) @ 2009-01-21 18:24 ` Corinna Vinschen 2009-01-21 18:56 ` Yaakov (Cygwin/X) 0 siblings, 1 reply; 17+ messages in thread From: Corinna Vinschen @ 2009-01-21 18:24 UTC (permalink / raw) To: cygwin-apps On Jan 21 11:58, Yaakov (Cygwin/X) wrote: > Corinna Vinschen wrote: > > Ok, but the Cygwin resolver lib also works without this file because the > > nameserver information can be (and is) fetched from Windows. Would it > > be feasible to use the same method as the resolver lib so that we don't > > have two libs using different methods? The resolver lib uses > > /etc/resolv.conf, but falls back to calling the Windows function > > GetNetworkParam to fetch this information if the resolve.conf file > > doesn't exist(*). > > BIND does not use libresolv/minires, it uses its own code (in liblwres) > for parsing /etc/resolv.conf and doing the actual resolver operations. Well, yes. That's why I'm asking the above question. Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Project Co-Leader cygwin AT cygwin DOT com Red Hat ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-21 18:24 ` Corinna Vinschen @ 2009-01-21 18:56 ` Yaakov (Cygwin/X) 2009-01-21 19:33 ` Corinna Vinschen 0 siblings, 1 reply; 17+ messages in thread From: Yaakov (Cygwin/X) @ 2009-01-21 18:56 UTC (permalink / raw) To: cygwin-apps -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Corinna Vinschen wrote: > Well, yes. That's why I'm asking the above question. I'm really not sure where you're going with this. This isn't Cygwin specific; BIND doesn't use libresolv on Linux either. Yaakov -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (Cygwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEAREIAAYFAkl3b+wACgkQpiWmPGlmQSPqBwCgmiegh+It+YrLeBqrxRqQfupK 35wAn2oiQlA++BQFhXq1HZwNrAvn2FfI =gBy1 -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-21 18:56 ` Yaakov (Cygwin/X) @ 2009-01-21 19:33 ` Corinna Vinschen 2009-01-21 23:11 ` Yaakov (Cygwin/X) 0 siblings, 1 reply; 17+ messages in thread From: Corinna Vinschen @ 2009-01-21 19:33 UTC (permalink / raw) To: cygwin-apps On Jan 21 12:56, Yaakov (Cygwin/X) wrote: > Corinna Vinschen wrote: > > Well, yes. That's why I'm asking the above question. > > I'm really not sure where you're going with this. This isn't Cygwin > specific; BIND doesn't use libresolv on Linux either. I'm not asking to use the resolver lib. I'm asking that the resolver code in bind's libs uses the same method to fetch nameserver and domain information as Cygwin's default resolver does. Which is basically - use /etc/resolv.conf if available - otherwise, use Windows' GetNetworkParam() function. Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Project Co-Leader cygwin AT cygwin DOT com Red Hat ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-21 19:33 ` Corinna Vinschen @ 2009-01-21 23:11 ` Yaakov (Cygwin/X) 2009-01-22 8:57 ` Corinna Vinschen 0 siblings, 1 reply; 17+ messages in thread From: Yaakov (Cygwin/X) @ 2009-01-21 23:11 UTC (permalink / raw) To: cygwin-apps -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Corinna Vinschen wrote: > I'm not asking to use the resolver lib. I'm asking that the resolver > code in bind's libs uses the same method to fetch nameserver and > domain information as Cygwin's default resolver does. You could just as easily make the same argument on Linux: glibc already includes a resolver lib, so why shouldn't BIND use it? I have yet to see a Linux distribution patch bind to use libresolv, and I see little difference between using libresolv and copying (part of) minires into BIND. > Which is basically > > - use /etc/resolv.conf if available > - otherwise, use Windows' GetNetworkParam() function. You asked originally if it was feasible to do so. There is a Windows version of BIND, so perhaps it is possible, but AFAICS accomodating both would be difficult to maintain. If we're going to expect every Cygwin user to maintain an /etc/fstab, I really don't see why we can't expect those few who want to use BIND to maintain an /etc/resolv.conf. Yaakov -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (Cygwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEAREIAAYFAkl3q4oACgkQpiWmPGlmQSM3EQCeIaDh5+tE04p8Gq8ozWYsMEKn 7pwAoKXg4gPCQrRSsgMF4frUT1KDqQDA =kDMr -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-21 23:11 ` Yaakov (Cygwin/X) @ 2009-01-22 8:57 ` Corinna Vinschen 0 siblings, 0 replies; 17+ messages in thread From: Corinna Vinschen @ 2009-01-22 8:57 UTC (permalink / raw) To: cygwin-apps On Jan 21 17:11, Yaakov (Cygwin/X) wrote: > Corinna Vinschen wrote: > > I'm not asking to use the resolver lib. I'm asking that the resolver > > code in bind's libs uses the same method to fetch nameserver and > > domain information as Cygwin's default resolver does. > > You could just as easily make the same argument on Linux: glibc already > includes a resolver lib, so why shouldn't BIND use it? I have yet to > see a Linux distribution patch bind to use libresolv, and I see little > difference between using libresolv and copying (part of) minires into BIND. Is my English really so bad? I'm not (NOT) asking that bind uses the minires/Cygwin resolver. I'm just talking about the methods used to fetch resolver information. On Linux, the resolver in glibc and the resolver code in BIND are using the same technique. Which is, fetch the information from /etc/resolv.conf. That file is the only source of information on Linux anyway. On Cygwin, the resolver code in minires/Cygwin is right now using a different technique than the resolver code in BIND. Minires/Cygwin uses the Win32 function GetNetworkParam() if /etc/resolv.conf does not exist. The idea is that you enhance the BIND resolver code to do the same: Use /etc/resolv.conf if it exists. But if not, use GetNetworkParam() to fetch the same information. And that's a big difference since the user doesn't have to duplicate this information, especially if it changes. And using GetNetworkParam is really simple. An #ifdef __CYGWIN__ with about 30 lines of code. > > Which is basically > > > > - use /etc/resolv.conf if available > > - otherwise, use Windows' GetNetworkParam() function. > > You asked originally if it was feasible to do so. There is a Windows > version of BIND, so perhaps it is possible, but AFAICS accomodating both > would be difficult to maintain. If we're going to expect every Cygwin > user to maintain an /etc/fstab, I really don't see why we can't expect > those few who want to use BIND to maintain an /etc/resolv.conf. Apples/Oranges. POSIX mount points don't exist anywhere in Windows, resolver information does. Yes, /etc/passwd and /etc/group also contain redundant information and I'm not happy with it. But in contrast to /etc/resolv.conf the information in this files also contains information not available on the system by default. Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Project Co-Leader cygwin AT cygwin DOT com Red Hat ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-21 17:38 ` Corinna Vinschen 2009-01-21 17:58 ` Yaakov (Cygwin/X) @ 2009-01-22 2:26 ` Pierre A. Humblet 2009-01-22 9:04 ` Corinna Vinschen 1 sibling, 1 reply; 17+ messages in thread From: Pierre A. Humblet @ 2009-01-22 2:26 UTC (permalink / raw) To: cygwin-apps At 12:37 PM 1/21/2009, Corinna Vinschen wrote: >On Jan 21 11:20, Yaakov (Cygwin/X) wrote:> > Corinna Vinschen wrote: >> > Why does the bind package require an /etc/resolv.conf file? Isn't that >> > used only by the resolver lib? And the resolver lib is part of Cygwin >> > 1.7 anyway, or in the minires package for Cygwin 1.5. Minires/Cygwin 1.7 >> > don't need a resolv.conf file, so why does bind?!? >> >> I was attempting to avoid a FAQ. BIND is a DNS suite, and it needs to >> know the address of a nameserver in order to do lookups. The usage of >> /etc/resolv.conf is well documented in both the manpages and the online >> manual. > >Ok, but the Cygwin resolver lib also works without this file because the >nameserver information can be (and is) fetched from Windows. Would it >be feasible to use the same method as the resolver lib so that we don't >have two libs using different methods? The resolver lib uses >/etc/resolv.conf, but falls back to calling the Windows function >GetNetworkParam to fetch this information if the resolve.conf file >doesn't exist(*). There is another problem. If resolv.conf exists then minires and the cygwin 1.7 resolver default to using the name servers directly instead of using the internal Windows resolver. That's useful to those who don't want to use the default dns server of their isp, which may offer a "DNS assistance" feature that maps non existent domains to a web server operated by the ISP, while keeping dns assistance for their web browser. http://log.psi.cc/2008/03/02/how-to-disable-verizon-dns-assistance/ http://netservices.verizon.net/portal/link/help/item?case=dns_assist_fios&partner=verizon&product=fios If it's a problem we can change the behavior of the cygwin 1.7 resolver to require more than the existence of resolv.conf to enable the bypass. Pierre ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-22 2:26 ` Pierre A. Humblet @ 2009-01-22 9:04 ` Corinna Vinschen 0 siblings, 0 replies; 17+ messages in thread From: Corinna Vinschen @ 2009-01-22 9:04 UTC (permalink / raw) To: cygwin-apps On Jan 21 21:23, Pierre A. Humblet wrote: > There is another problem. If resolv.conf exists then minires and the cygwin 1.7 > resolver default to using the name servers directly instead of using the > internal > Windows resolver. > That's useful to those who don't want to use the default dns server of > their isp, which > may offer a "DNS assistance" feature that maps non existent domains to a web > server operated by the ISP, while keeping dns assistance for their web browser. > http://log.psi.cc/2008/03/02/how-to-disable-verizon-dns-assistance/ > http://netservices.verizon.net/portal/link/help/item?case=dns_assist_fios&partner=verizon&product=fios > > If it's a problem we can change the behavior of the cygwin 1.7 resolver to > require > more than the existence of resolv.conf to enable the bypass. I don't think so. The above explained method sounds quite right to me. Thas't what I expect if an /etc/resolv.conf file exists and I'm sure that's what happens in BIND's resolver code as well. Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Project Co-Leader cygwin AT cygwin DOT com Red Hat ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-21 16:51 ` Andrew Schulman 2009-01-21 17:08 ` Corinna Vinschen @ 2009-01-21 17:08 ` Yaakov (Cygwin/X) 2009-01-21 17:46 ` Andrew Schulman 1 sibling, 1 reply; 17+ messages in thread From: Yaakov (Cygwin/X) @ 2009-01-21 17:08 UTC (permalink / raw) To: cygwin-apps -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA256 Andrew Schulman wrote: > A request: I think a lot of people would find it useful if you were to split > out the client tools, in particular 'host', from the bind server package. I > don't want to run a DNS server-- I just want to be able to use the 'host' > command. Thanks, Andrew. I don't see that as a compelling argument to justify YA binary package. Just because you install a package doesn't mean you have to use every single tool included therein. Yaakov -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (Cygwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEAREIAAYFAkl3VqAACgkQpiWmPGlmQSPlxACg4KVpRwavGPK3A5nP1/B232o4 4vcAnjReO7mcydEBjK58A2p6e5ORwSj4 =iq7d -----END PGP SIGNATURE----- ^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [ITP] bind-9.6.0-1 2009-01-21 17:08 ` Yaakov (Cygwin/X) @ 2009-01-21 17:46 ` Andrew Schulman 0 siblings, 0 replies; 17+ messages in thread From: Andrew Schulman @ 2009-01-21 17:46 UTC (permalink / raw) To: cygwin-apps > > A request: I think a lot of people would find it useful if you were to split > > out the client tools, in particular 'host', from the bind server package. I > > don't want to run a DNS server-- I just want to be able to use the 'host' > > command. Thanks, Andrew. > > I don't see that as a compelling argument to justify YA binary package. > Just because you install a package doesn't mean you have to use every > single tool included therein. At the risk of prolonging the argument, I'll just boldly claim without proof that all but a small percentage of the people who install the bind package will want only the client. In that case, parsimony and security argue for not installing the server on those users' hosts-- even if they choose not to run it. Whether that argument is compelling enough to justify splitting the package is of course your call. In any case, thanks for packaging bind. Andrew. ^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2009-01-22 9:04 UTC | newest] Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2009-01-18 22:05 [ITP] bind-9.6.0-1 Yaakov (Cygwin/X) 2009-01-19 3:54 ` Christopher Faylor 2009-01-19 10:32 ` Corinna Vinschen 2009-01-21 16:51 ` Andrew Schulman 2009-01-21 17:08 ` Corinna Vinschen 2009-01-21 17:20 ` Yaakov (Cygwin/X) 2009-01-21 17:38 ` Corinna Vinschen 2009-01-21 17:58 ` Yaakov (Cygwin/X) 2009-01-21 18:24 ` Corinna Vinschen 2009-01-21 18:56 ` Yaakov (Cygwin/X) 2009-01-21 19:33 ` Corinna Vinschen 2009-01-21 23:11 ` Yaakov (Cygwin/X) 2009-01-22 8:57 ` Corinna Vinschen 2009-01-22 2:26 ` Pierre A. Humblet 2009-01-22 9:04 ` Corinna Vinschen 2009-01-21 17:08 ` Yaakov (Cygwin/X) 2009-01-21 17:46 ` Andrew Schulman
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).