* Perl 5.22.0 @ 2015-06-01 20:08 Achim Gratz 2015-06-02 19:49 ` Achim Gratz 2015-06-05 5:26 ` Achim Gratz 0 siblings, 2 replies; 19+ messages in thread From: Achim Gratz @ 2015-06-01 20:08 UTC (permalink / raw) To: cygwin-apps The 5.22.0 release of Perl has happened on schedule. The Cygwin packages are building at the moment, I will need another day or two for the distribution rebuilds. The current plan is that the packages should be available on my server by the end of the week latest. Depending on how the rebuilds of the other packages and distributions depending on the new Perl are progressing I might release a test version on cygwin.com as well. Otherwise the first official Cygwin release will be 5.22.1, scheduled for beginning of July. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Factory and User Sound Singles for Waldorf Blofeld: http://Synth.Stromeko.net/Downloads.html#WaldorfSounds ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-06-01 20:08 Perl 5.22.0 Achim Gratz @ 2015-06-02 19:49 ` Achim Gratz 2015-06-05 5:26 ` Achim Gratz 1 sibling, 0 replies; 19+ messages in thread From: Achim Gratz @ 2015-06-02 19:49 UTC (permalink / raw) To: cygwin-apps Achim Gratz writes: > The 5.22.0 release of Perl has happened on schedule. The Cygwin > packages are building at the moment, I will need another day or two for > the distribution rebuilds. I've patched up the Perl packages to where I want them. There were some extra files packaged by accident that shouldn't have been there and a few things that still have not been upstreamed. The stage 1 / bootstrap is running for x86_64 and x86 will follow tomorrow. I'll probably do a stage 2 build to be sure that I haven't picked up any RC2 remnants by accident before making the packages available around the end of the week. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Samples for the Waldorf Blofeld: http://Synth.Stromeko.net/Downloads.html#BlofeldSamplesExtra ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-06-01 20:08 Perl 5.22.0 Achim Gratz 2015-06-02 19:49 ` Achim Gratz @ 2015-06-05 5:26 ` Achim Gratz 2015-06-30 2:48 ` Yaakov Selkowitz 2015-07-14 19:51 ` Achim Gratz 1 sibling, 2 replies; 19+ messages in thread From: Achim Gratz @ 2015-06-05 5:26 UTC (permalink / raw) To: cygwin-apps > The current plan is that the packages should be available on my server > by the end of the week latest. I've just uploaded the files, please point setup at: setup-{x86,x86_64}.exe -XOs http://cygwin.stromeko.net/ Please rebuild your Perl distributions again, since officially RCx releases are not binary compatible with the official ones. If you've already installed RC2, then you'll have to re-install everything Perl (setup doesn't recognize 5.22.0-RC2 as being pre-5.22.0 and all distributions that haven't had a version bump in the meantime still come with the same release number). Instead of clicking on all hundreds of selection boxes, you can do this before starting setup: sed -re 's/(5\.22\.0-)(RC2-)?[0-9]/\10/;s/( perl-.*-)[0-9]+\./\10./' \ -i.bak /etc/setup/installed.db This will cause all Perl related stuff to be updated without your manual intervention. > Depending on how the rebuilds of the other packages and distributions > depending on the new Perl are progressing I might release a test > version on cygwin.com as well. This has become less likely, given my work schedule. > Otherwise the first official Cygwin release will be 5.22.1, scheduled > for beginning of July. At the moment that is plan A, so everyone has about four weeks to build for Perl 5.22 using the 5.22.0 "private" release. No rebuilds of distributions will be necessary with the 5.22.1 version bump. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ SD adaptation for Waldorf rackAttack V1.04R1: http://Synth.Stromeko.net/Downloads.html#WaldorfSDada ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-06-05 5:26 ` Achim Gratz @ 2015-06-30 2:48 ` Yaakov Selkowitz 2015-07-14 19:51 ` Achim Gratz 1 sibling, 0 replies; 19+ messages in thread From: Yaakov Selkowitz @ 2015-06-30 2:48 UTC (permalink / raw) To: cygwin-apps On Fri, 2015-06-05 at 07:26 +0200, Achim Gratz wrote: > If you've already installed RC2, then you'll have to re-install > everything Perl (setup doesn't recognize 5.22.0-RC2 as being pre-5.22.0 > and all distributions that haven't had a version bump in the meantime > still come with the same release number). For future reference, current setup*.exe versions are stricter about version handling, and therefore IOW 5.22.0-RC2 would have needed to be versioned as e.g. 5.22.0-0.1.RC2. -- Yaakov ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-06-05 5:26 ` Achim Gratz 2015-06-30 2:48 ` Yaakov Selkowitz @ 2015-07-14 19:51 ` Achim Gratz 2015-07-14 20:40 ` Marco Atzeri ` (3 more replies) 1 sibling, 4 replies; 19+ messages in thread From: Achim Gratz @ 2015-07-14 19:51 UTC (permalink / raw) To: cygwin-apps Achim Gratz writes: >> Otherwise the first official Cygwin release will be 5.22.1, scheduled >> for beginning of July. > > At the moment that is plan A, so everyone has about four weeks to build > for Perl 5.22 using the 5.22.0 "private" release. No rebuilds of > distributions will be necessary with the 5.22.1 version bump. It turns out the actual schedule for 5.22.1 is around September and the original announcement that it would come in about a monthwqas copied from some older announcement. :-) I have rebuilt Perl 5.22.0 and all distributions including some updates in the last month with the updated toolchain. I've uploaded the files to my server if you want to test, please point setup at: setup-{x86,x86_64}.exe -XOs http://cygwin.stromeko.net/ Again, since the release numbers haven't been bumped, it's easiest to cheat on setup to get it to re-install everything Perl: sed -re 's/( perl-.*-)[0-9]+\./\10./' -i.bak /etc/setup/installed.db Keep in mind I have downgraded perl-Unicode-Normalize to 1.17, so you need to click on that switch. As a reminder to the other maintainers, here's the list of packages to be taken care of for the update again. The following Perl distributions are in the hands of Yaakov, mainly because they are related to library or tool packages he owns. perl-Authen-SASL perl-Cairo perl-Cairo-GObject perl-Glib perl-Glib-Object-Introspection perl-Gnome2 perl-Gnome2-Canvas perl-Gnome2-GConf perl-Gnome2-Rsvg perl-Gnome2-VFS perl-Gnome2-Vte perl-Gnome2-Wnck perl-GStreamer perl-GStreamer-Interfaces perl-Gtk2 perl-Gtk2-GladeXML perl-Gtk2-Notify perl-Gtk2-SourceView2 perl-Gtk2-Spell perl-Gtk2-Unique perl-Gtk2-WebKit perl-Gtk3 perl-MailTools perl-Net-SMTP-SSL perl-Pango perl-PAR-Packer perl-SGMLSpm perl-Tk perl-Tk-Canvas-GradientColor perl-Tk-ColoredButton perl-Tk-EntryCheck perl-Tk-Getopt perl-Tk-Pod There are a few Perl distribution packages that are captive in another source package. The hopefully complete list of such packages: perl-Graphics-Magick perl-gv perl-Image-Magick perl-ming perl-Net-Libproxy perl-Xfce4-Xfconf perl-zinnia This means that again Yaakov as well as Marco and Volker need to re-release those. Yaakov has volunteered to update Volker's packages while he's away, I hope the offer still stands. These packages place module files into vendor_perl while the package name has nothing to do with Perl (not all of them are available for both architectures): amanda biber git-svn git irssi net-snmp-perl po4a pristine-tar sendxmpp subversion-perl And lastly, two packages put files in site_perl which should not happen for official packages, so that should be corrected anyway: grepmail stow The last two sets of packages involve Mark O'Keefe, Ken Brown, Adam Dinwoodie, Marco, David Rothenberger, Jari Aalto, Andrew Schulman and Yaakov again. Since the move of all packages into the release should happen at the same time, I think we need to do something slightly different this time around: I propose that instead of posting a !ready cookie a !perl cookie is used instead (I hopa that would not create problems with upset). Then a maintainer with full ssh access can flip those cookies over to !ready between two scans so that all packages get moved at the same time. Would that work for everybody? Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Factory and User Sound Singles for Waldorf Blofeld: http://Synth.Stromeko.net/Downloads.html#WaldorfSounds ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-14 19:51 ` Achim Gratz @ 2015-07-14 20:40 ` Marco Atzeri 2015-07-15 5:29 ` Achim Gratz 2015-07-16 4:00 ` Marco Atzeri 2015-07-14 21:00 ` Ken Brown ` (2 subsequent siblings) 3 siblings, 2 replies; 19+ messages in thread From: Marco Atzeri @ 2015-07-14 20:40 UTC (permalink / raw) To: cygwin-apps On 7/14/2015 9:51 PM, Achim Gratz wrote: > Achim Gratz writes: > > There are a few Perl distribution packages that are captive in another > source package. The hopefully complete list of such packages: > > perl-Graphics-Magick > perl-gv > perl-Image-Magick > perl-ming > perl-Net-Libproxy > perl-Xfce4-Xfconf > perl-zinnia > > This means that again Yaakov as well as Marco and Volker need to > re-release those. Yaakov has volunteered to update Volker's packages > while he's away, I hope the offer still stands. perl-Graphics-Magick perl-Image-Magick are already available as test > These packages place module files into vendor_perl while the package > name has nothing to do with Perl (not all of them are available for both > architectures): > > amanda > biber > git-svn > git > irssi > net-snmp-perl > po4a > pristine-tar > sendxmpp > subversion-perl > > And lastly, two packages put files in site_perl which should not happen > for official packages, so that should be corrected anyway: > > grepmail > stow > > The last two sets of packages involve Mark O'Keefe, > Ken Brown, Adam Dinwoodie, Marco, David Rothenberger, Jari Aalto, Andrew > Schulman and Yaakov again. > > > Since the move of all packages into the release should happen at the > same time, I think we need to do something slightly different this time > around: I propose that instead of posting a !ready cookie a !perl cookie > is used instead (I hopa that would not create problems with upset). > Then a maintainer with full ssh access can flip those cookies over to > !ready between two scans so that all packages get moved at the same > time. Would that work for everybody? I will prefer to upload as test any perl 5.22 package. Updating the setup.hint will immediately move all the packages at the same time. > > > Regards, > Achim. > ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-14 20:40 ` Marco Atzeri @ 2015-07-15 5:29 ` Achim Gratz 2015-07-16 4:00 ` Marco Atzeri 1 sibling, 0 replies; 19+ messages in thread From: Achim Gratz @ 2015-07-15 5:29 UTC (permalink / raw) To: cygwin-apps Marco Atzeri writes: > I will prefer to upload as test any perl 5.22 package. You can do that. > Updating the setup.hint will immediately move all the > packages at the same time. Then it's this update that needs to be coordinated with the change of Perl to 5.22. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Factory and User Sound Singles for Waldorf rackAttack: http://Synth.Stromeko.net/Downloads.html#WaldorfSounds ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-14 20:40 ` Marco Atzeri 2015-07-15 5:29 ` Achim Gratz @ 2015-07-16 4:00 ` Marco Atzeri 1 sibling, 0 replies; 19+ messages in thread From: Marco Atzeri @ 2015-07-16 4:00 UTC (permalink / raw) To: cygwin-apps On 7/14/2015 10:40 PM, Marco Atzeri wrote: > On 7/14/2015 9:51 PM, Achim Gratz wrote: >> Achim Gratz writes: > >> >> There are a few Perl distribution packages that are captive in another >> source package. The hopefully complete list of such packages: >> >> perl-Graphics-Magick >> perl-gv >> perl-Image-Magick >> perl-ming >> perl-Net-Libproxy >> perl-Xfce4-Xfconf >> perl-zinnia >> >> This means that again Yaakov as well as Marco and Volker need to >> re-release those. Yaakov has volunteered to update Volker's packages >> while he's away, I hope the offer still stands. > > perl-Graphics-Magick > perl-Image-Magick > > are already available as test > >> These packages place module files into vendor_perl while the package >> name has nothing to do with Perl (not all of them are available for both >> architectures): >> >> amanda >> biber >> git-svn >> git >> irssi >> net-snmp-perl >> po4a >> pristine-tar >> sendxmpp >> subversion-perl irssi postgresql-plperl are also available as test >> >> And lastly, two packages put files in site_perl which should not happen >> for official packages, so that should be corrected anyway: >> >> grepmail >> stow >> Regards MArco ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-14 19:51 ` Achim Gratz 2015-07-14 20:40 ` Marco Atzeri @ 2015-07-14 21:00 ` Ken Brown 2015-07-15 5:35 ` Achim Gratz 2015-07-19 18:55 ` Achim Gratz 2015-07-26 13:19 ` Achim Gratz 3 siblings, 1 reply; 19+ messages in thread From: Ken Brown @ 2015-07-14 21:00 UTC (permalink / raw) To: cygwin-apps On 7/14/2015 3:51 PM, Achim Gratz wrote: > These packages place module files into vendor_perl while the package > name has nothing to do with Perl (not all of them are available for both > architectures): > > biber This all set and uploaded to my release area. I'll just have to either change the setup.hint to make it a test release or else upload a !perl cookie, depending on how this ends up being handled. Ken ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-14 21:00 ` Ken Brown @ 2015-07-15 5:35 ` Achim Gratz 2015-07-15 12:27 ` Ken Brown 0 siblings, 1 reply; 19+ messages in thread From: Achim Gratz @ 2015-07-15 5:35 UTC (permalink / raw) To: cygwin-apps Ken Brown writes: > On 7/14/2015 3:51 PM, Achim Gratz wrote: >> biber > > This all set and uploaded to my release area. Thanks. Just to be sure, this build uses the system supplied Unicode modules or did you fatpack them? I've downgraded Unicode-Normalize to 1.17 just for Biber, so I'd be a bit bummed if the latter… :-) Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Waldorf MIDI Implementation & additional documentation: http://Synth.Stromeko.net/Downloads.html#WaldorfDocs ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-15 5:35 ` Achim Gratz @ 2015-07-15 12:27 ` Ken Brown 0 siblings, 0 replies; 19+ messages in thread From: Ken Brown @ 2015-07-15 12:27 UTC (permalink / raw) To: cygwin-apps On 7/15/2015 1:34 AM, Achim Gratz wrote: > Ken Brown writes: >> On 7/14/2015 3:51 PM, Achim Gratz wrote: >>> biber >> >> This all set and uploaded to my release area. > > Thanks. Just to be sure, this build uses the system supplied Unicode > modules or did you fatpack them? I've downgraded Unicode-Normalize to > 1.17 just for Biber, so I'd be a bit bummed if the latter⦠:-) I used Unicode-Normalize-1.17 that I had built myself, using the cygport file attached here: https://cygwin.com/ml/cygwin-apps/2015-07/msg00036.html Ken ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-14 19:51 ` Achim Gratz 2015-07-14 20:40 ` Marco Atzeri 2015-07-14 21:00 ` Ken Brown @ 2015-07-19 18:55 ` Achim Gratz 2015-07-20 7:28 ` Corinna Vinschen 2015-07-20 11:58 ` Adam Dinwoodie 2015-07-26 13:19 ` Achim Gratz 3 siblings, 2 replies; 19+ messages in thread From: Achim Gratz @ 2015-07-19 18:55 UTC (permalink / raw) To: cygwin-apps Achim Gratz writes: > I have rebuilt Perl 5.22.0 and all distributions including some updates > in the last month with the updated toolchain. I've uploaded the files > to my server if you want to test, please point setup at: I've now uploaded everything to the release area as well, so it would be nice to finally decide how to make the switch. Here's the list of distribution that would need to be updated in synchrony and have not been spoken for so far (most of those are from Yaakov and Volker, whose packages Yaakov has promised to re-release): > perl-Authen-SASL > perl-Cairo > perl-Cairo-GObject > perl-Glib > perl-Glib-Object-Introspection > perl-Gnome2 > perl-Gnome2-Canvas > perl-Gnome2-GConf > perl-Gnome2-Rsvg > perl-Gnome2-VFS > perl-Gnome2-Vte > perl-Gnome2-Wnck > perl-GStreamer > perl-GStreamer-Interfaces > perl-Gtk2 > perl-Gtk2-GladeXML > perl-Gtk2-Notify > perl-Gtk2-SourceView2 > perl-Gtk2-Spell > perl-Gtk2-Unique > perl-Gtk2-WebKit > perl-Gtk3 > perl-MailTools > perl-Net-SMTP-SSL > perl-Pango > perl-PAR-Packer > perl-SGMLSpm > perl-Tk > perl-Tk-Canvas-GradientColor > perl-Tk-ColoredButton > perl-Tk-EntryCheck > perl-Tk-Getopt > perl-Tk-Pod > perl-gv > perl-ming > perl-Net-Libproxy > perl-Xfce4-Xfconf > perl-zinnia > amanda > git-svn > git > net-snmp-perl > po4a > pristine-tar > sendxmpp > subversion-perl > grepmail > stow Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ SD adaptation for Waldorf Blofeld V1.15B11: http://Synth.Stromeko.net/Downloads.html#WaldorfSDada ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-19 18:55 ` Achim Gratz @ 2015-07-20 7:28 ` Corinna Vinschen 2015-07-20 9:21 ` Marco Atzeri 2015-07-20 16:05 ` Achim Gratz 2015-07-20 11:58 ` Adam Dinwoodie 1 sibling, 2 replies; 19+ messages in thread From: Corinna Vinschen @ 2015-07-20 7:28 UTC (permalink / raw) To: cygwin-apps [-- Attachment #1: Type: text/plain, Size: 974 bytes --] Hi Achim, On Jul 19 20:55, Achim Gratz wrote: > Achim Gratz writes: > > I have rebuilt Perl 5.22.0 and all distributions including some updates > > in the last month with the updated toolchain. I've uploaded the files > > to my server if you want to test, please point setup at: > > I've now uploaded everything to the release area as well, so it would be > nice to finally decide how to make the switch. > > Here's the list of distribution that would need to be updated in > synchrony and have not been spoken for so far (most of those are from > Yaakov and Volker, whose packages Yaakov has promised to re-release): > [...] I'm far from a perl expert, so I'm wondering what about other packages depending on perl, e.g. openssl-perl? What constitutes a package which needs rebuilding? Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Maintainer cygwin AT cygwin DOT com Red Hat [-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-20 7:28 ` Corinna Vinschen @ 2015-07-20 9:21 ` Marco Atzeri 2015-07-20 9:43 ` Corinna Vinschen 2015-07-20 16:05 ` Achim Gratz 1 sibling, 1 reply; 19+ messages in thread From: Marco Atzeri @ 2015-07-20 9:21 UTC (permalink / raw) To: cygwin-apps On 7/20/2015 9:28 AM, Corinna Vinschen wrote: > Hi Achim, > > On Jul 19 20:55, Achim Gratz wrote: >> Achim Gratz writes: >>> I have rebuilt Perl 5.22.0 and all distributions including some updates >>> in the last month with the updated toolchain. I've uploaded the files >>> to my server if you want to test, please point setup at: >> >> I've now uploaded everything to the release area as well, so it would be >> nice to finally decide how to make the switch. >> >> Here's the list of distribution that would need to be updated in >> synchrony and have not been spoken for so far (most of those are from >> Yaakov and Volker, whose packages Yaakov has promised to re-release): >> [...] > > I'm far from a perl expert, so I'm wondering what about other packages > depending on perl, e.g. openssl-perl? What constitutes a package which > needs rebuilding? > > > Corinna > I would say $ ldd irssi.exe |grep perl cygperl5_14.dll => /usr/bin/cygperl5_14.dll (0x4df20000) Marco ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-20 9:21 ` Marco Atzeri @ 2015-07-20 9:43 ` Corinna Vinschen 0 siblings, 0 replies; 19+ messages in thread From: Corinna Vinschen @ 2015-07-20 9:43 UTC (permalink / raw) To: cygwin-apps [-- Attachment #1: Type: text/plain, Size: 1376 bytes --] On Jul 20 11:21, Marco Atzeri wrote: > On 7/20/2015 9:28 AM, Corinna Vinschen wrote: > >Hi Achim, > > > >On Jul 19 20:55, Achim Gratz wrote: > >>Achim Gratz writes: > >>>I have rebuilt Perl 5.22.0 and all distributions including some updates > >>>in the last month with the updated toolchain. I've uploaded the files > >>>to my server if you want to test, please point setup at: > >> > >>I've now uploaded everything to the release area as well, so it would be > >>nice to finally decide how to make the switch. > >> > >>Here's the list of distribution that would need to be updated in > >>synchrony and have not been spoken for so far (most of those are from > >>Yaakov and Volker, whose packages Yaakov has promised to re-release): > >>[...] > > > >I'm far from a perl expert, so I'm wondering what about other packages > >depending on perl, e.g. openssl-perl? What constitutes a package which > >needs rebuilding? > > > > > >Corinna > > > > I would say > > $ ldd irssi.exe |grep perl > cygperl5_14.dll => /usr/bin/cygperl5_14.dll (0x4df20000) Duh, right. Packages only using perl via scripting are not affected, obviously. I retract the question... :} Thanks, Corinna -- Corinna Vinschen Please, send mails regarding Cygwin to Cygwin Maintainer cygwin AT cygwin DOT com Red Hat [-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --] ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-20 7:28 ` Corinna Vinschen 2015-07-20 9:21 ` Marco Atzeri @ 2015-07-20 16:05 ` Achim Gratz 1 sibling, 0 replies; 19+ messages in thread From: Achim Gratz @ 2015-07-20 16:05 UTC (permalink / raw) To: cygwin-apps Corinna Vinschen writes: > I'm far from a perl expert, so I'm wondering what about other packages > depending on perl, e.g. openssl-perl? What constitutes a package which > needs rebuilding? Anything that links against cygperl-*.dll or that drops files into /usr/lib/perl5/{site,vendor}_perl/5.*/ for a value of "*"!="22". Openssl-perl only provides scripts, so it isn't affected. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ SD adaptation for Waldorf microQ V2.22R2: http://Synth.Stromeko.net/Downloads.html#WaldorfSDada ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-19 18:55 ` Achim Gratz 2015-07-20 7:28 ` Corinna Vinschen @ 2015-07-20 11:58 ` Adam Dinwoodie 2015-07-20 16:06 ` Achim Gratz 1 sibling, 1 reply; 19+ messages in thread From: Adam Dinwoodie @ 2015-07-20 11:58 UTC (permalink / raw) To: cygwin-apps On Sun, Jul 19, 2015 at 08:55:41PM +0200, Achim Gratz wrote: > Here's the list of distribution that would need to be updated in > synchrony and have not been spoken for so far (most of those are from > Yaakov and Volker, whose packages Yaakov has promised to re-release): > > > <snip> > > git-svn > > git > > <snip> Ack these two. I should be able to upload a fresh build within the next few days. Adam ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-20 11:58 ` Adam Dinwoodie @ 2015-07-20 16:06 ` Achim Gratz 0 siblings, 0 replies; 19+ messages in thread From: Achim Gratz @ 2015-07-20 16:06 UTC (permalink / raw) To: cygwin-apps Adam Dinwoodie writes: > Ack these two. I should be able to upload a fresh build within the next > few days. Thank you. I'd really like to get the update done over the upcoming weekend, if possible. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ Factory and User Sound Singles for Waldorf Blofeld: http://Synth.Stromeko.net/Downloads.html#WaldorfSounds ^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: Perl 5.22.0 2015-07-14 19:51 ` Achim Gratz ` (2 preceding siblings ...) 2015-07-19 18:55 ` Achim Gratz @ 2015-07-26 13:19 ` Achim Gratz 3 siblings, 0 replies; 19+ messages in thread From: Achim Gratz @ 2015-07-26 13:19 UTC (permalink / raw) To: cygwin-apps Achim Gratz writes: > As a reminder to the other maintainers, here's the list of packages to > be taken care of for the update again. Here goes another week without the new Perl getting released for lack of response from other maintainers. Since I'll be on a business trip next week, I'll give you another week to prepare. My plan now is that I'm going to release Perl 5.22 at the end of next week if I don't hear from you. Regards, Achim. -- +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+ SD adaptation for Waldorf Blofeld V1.15B11: http://Synth.Stromeko.net/Downloads.html#WaldorfSDada ^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2015-07-26 13:19 UTC | newest] Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-06-01 20:08 Perl 5.22.0 Achim Gratz 2015-06-02 19:49 ` Achim Gratz 2015-06-05 5:26 ` Achim Gratz 2015-06-30 2:48 ` Yaakov Selkowitz 2015-07-14 19:51 ` Achim Gratz 2015-07-14 20:40 ` Marco Atzeri 2015-07-15 5:29 ` Achim Gratz 2015-07-16 4:00 ` Marco Atzeri 2015-07-14 21:00 ` Ken Brown 2015-07-15 5:35 ` Achim Gratz 2015-07-15 12:27 ` Ken Brown 2015-07-19 18:55 ` Achim Gratz 2015-07-20 7:28 ` Corinna Vinschen 2015-07-20 9:21 ` Marco Atzeri 2015-07-20 9:43 ` Corinna Vinschen 2015-07-20 16:05 ` Achim Gratz 2015-07-20 11:58 ` Adam Dinwoodie 2015-07-20 16:06 ` Achim Gratz 2015-07-26 13:19 ` Achim Gratz
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).