CMake 2.4.7-1 ready

CMake 2.4.7-1 ready

[Bill Hoffman]

There has been a new release of the official CMake (2.4.7-1).
This is a minor release from to 2.4.6 to 2.4.7.

Here are the required files:

http://www.cmake.org/files/cygwin/setup.hint
http://www.cmake.org/files/cygwin/cmake-2.4.7-1.tar.bz2
http://www.cmake.org/files/cygwin/cmake-2.4.7-1-src.tar.bz2

The previous version should be cmake-2.2.3-1 and the current
version should be cmake-2.4.7-1.

Thanks.

-Bill

Re: CMake 2.4.7-1 ready

[Corinna Vinschen]

On Jul 23 10:44, Bill Hoffman wrote:
> There has been a new release of the official CMake (2.4.7-1).
> This is a minor release from to 2.4.6 to 2.4.7.
> 
> Here are the required files:
> 
> http://www.cmake.org/files/cygwin/setup.hint
> http://www.cmake.org/files/cygwin/cmake-2.4.7-1.tar.bz2
> http://www.cmake.org/files/cygwin/cmake-2.4.7-1-src.tar.bz2
> 
> The previous version should be cmake-2.2.3-1 and the current
> version should be cmake-2.4.7-1.

Uploaded and 2.4.6-1 removed.


Thanks,
Corinna

-- 
Corinna Vinschen                  Please, send mails regarding Cygwin to
Cygwin Project Co-Leader          cygwin AT cygwin DOT com
Red Hat

Re: CMake 2.4.7-1 ready

[Bill Hoffman]

Corinna Vinschen wrote:
> On Jul 23 10:44, Bill Hoffman wrote:
>   
>> There has been a new release of the official CMake (2.4.7-1).
>> This is a minor release from to 2.4.6 to 2.4.7.
>>
>> Here are the required files:
>>
>> http://www.cmake.org/files/cygwin/setup.hint
>> http://www.cmake.org/files/cygwin/cmake-2.4.7-1.tar.bz2
>> http://www.cmake.org/files/cygwin/cmake-2.4.7-1-src.tar.bz2
>>
>> The previous version should be cmake-2.2.3-1 and the current
>> version should be cmake-2.4.7-1.
>>     
>
> Uploaded and 2.4.6-1 removed.
> \
>   
I got this report from a cmake user:

> Hi, I installed Cygwin on a new machine intending to use ITK and 
> friends, but I reached a roadblock in that ccmake appears not to 
> exist, despite repeatedly installing and uninstalling, reinstalling 
> etc. the 2.4.7-1 installation. IN fact, selecteing 'source' option 
> does not even give me any source. Do you know what's up?
>  
I had some trouble myself when I tested the install.   I had to unpack 
the tar file by hand.   I must have messed something up.  Any ideas 
what?  Once unpacked by hand the cmake install was fine.  

-Bill

Re: CMake 2.4.7-1 ready

[Bill Hoffman]

Bill Hoffman wrote:
> I had some trouble myself when I tested the install.   I had to unpack 
> the tar file by hand.   I must have messed something up.  Any ideas 
> what?  Once unpacked by hand the cmake install was fine. 
> -Bill
>
I have tried again myself, and if I do a reinstall, the download part 
works fine.  But the install stage happens really fast.  I suspect there 
maybe an error flashing by, but I can't see it.   Is there a way to 
debug setup or get more verbose output?  Thanks.

-Bill

Re: CMake 2.4.7-1 ready

[Igor Peshansky]

On Fri, 27 Jul 2007, Bill Hoffman wrote:

> Bill Hoffman wrote:
> > I had some trouble myself when I tested the install.  I had to unpack
> > the tar file by hand.  I must have messed something up.  Any ideas
> > what?  Once unpacked by hand the cmake install was fine. -Bill
> >
> I have tried again myself, and if I do a reinstall, the download part
> works fine.  But the install stage happens really fast.  I suspect there
> maybe an error flashing by, but I can't see it.  Is there a way to debug
> setup or get more verbose output?  Thanks.

Look at /var/log/setup.log.full for a reasonably fine-grained trace of
setup's activity.  If there is an I/O error, it should show that.  Also,
it will contain the output your postinstall script produces.
HTH,
	Igor
-- 
				http://cs.nyu.edu/~pechtcha/
      |\      _,,,---,,_	    pechtcha@cs.nyu.edu | igor@watson.ibm.com
ZZZzz /,`.-'`'    -.  ;-;;,_		Igor Peshansky, Ph.D. (name changed!)
     |,4-  ) )-,_. ,\ (  `'-'		old name: Igor Pechtchanski
    '---''(_/--'  `-'\_) fL	a.k.a JaguaR-R-R-r-r-r-.-.-.  Meow!

Belief can be manipulated.  Only knowledge is dangerous.  -- Frank Herbert

Re: CMake 2.4.7-1 ready

[Bill Hoffman]

Igor Peshansky wrote:
> On Fri, 27 Jul 2007, Bill Hoffman wrote:
>
>   
> Look at /var/log/setup.log.full for a reasonably fine-grained trace of
> setup's activity.  If there is an I/O error, it should show that.  Also,
> it will contain the output your postinstall script produces.
> HTH,
> 	Igor
>   
Thanks I got this:

2007/07/27 16:12:01 Downloaded 
C:\cygwin/http%3a%2f%2fcygwin.osuosl.org/release/
cmake/cmake-2.4.7-1.tar.bz2
Checking MD5 for 
file://C:\cygwin/http%3a%2f%2fcygwin.osuosl.org/release/cmake/c
make-2.4.7-1.tar.bz2
MD5 verified OK: 
file://C:\cygwin/http%3a%2f%2fcygwin.osuosl.org/release/cmake/c
make-2.4.7-1.tar.bz2 98520e89e50d2930ec3f559aec8c5e33
2007/07/27 16:12:02 Installing 
file://C:\cygwin/http%3a%2f%2fcygwin.osuosl.org/r
elease/cmake/cmake-2.4.7-1.tar.bz2
2007/07/27 16:12:02 Visited: 174 nodes out of 854.

However, a different cmake user reported this:
> I had the same problem, but managed to install it using the setup.exe
> tool by following the steps described below. However, the simplest
> thing to do is just untar it manually into "/" and it should work OK.
> The comments below are provided to help diagnose the problem.
>
> I think the problem is that the tar package is not correct, or at
> least not setup.exe friendly. If you list the contents of the original
> file (tar -tf ...) and the one I got working, the difference is that
> the original file doesn't list the directories. That is, the contents
> were:
>
> // original tar file
> usr/bin/ccmake.exe
> usr/bin/cmake.exe
> usr/bin/cpack.exe
> usr/bin/ctest.exe
> ...
>
> // repackaged tar file (by me: tar -cvf ...)
> usr/
> usr/bin/
> usr/bin/ccmake.exe
> usr/bin/cmake.exe
> usr/bin/cpack.exe
> usr/bin/ctest.exe
> ...
>
> Apparently, setup.exe doesn't like that.
>
> So to wrap it up, what I did was I untared and re-tared the package.
> But then to get setup.exe to accept it as valid I also had to compute
> the size and md5 sums of the new file and put these values in the
> setup.ini entry for cmake.

So, it looks like my tar file is not correct.   However, I used the same
process to create it that have been doing for several releases now.

Any ideas what is wrong?

Thanks.

-Bill

Re: CMake 2.4.7-1 ready

[Kovarththanan Rajaratnam]

[-- Attachment #1: Type: text/plain, Size: 868 bytes --]

Hello Bill,

Bill Hoffman wrote:
> Bill Hoffman wrote:
>> I had some trouble myself when I tested the install.   I had to unpack 
>> the tar file by hand.   I must have messed something up.  Any ideas 
>> what?  Once unpacked by hand the cmake install was fine. -Bill
>>
> I have tried again myself, and if I do a reinstall, the download part 
> works fine.  But the install stage happens really fast.  I suspect there 
> maybe an error flashing by, but I can't see it.   Is there a way to 
> debug setup or get more verbose output?  Thanks.

I got an error similar to the one the other user reported to you (no 
source or binary in any form). I've attached the setup log. The 
following entry did catch my attention:

2007/07/29 16:47:36 io_stream_cygfile: fopen(/etc/setup/cmake.lst.gz) 
failed 2 No such file or directory

-- 
Best Regards
Kovarththanan Rajaratnam

[-- Attachment #2: setup.log.full --]
[-- Type: text/plain, Size: 10631 bytes --]

2007/07/29 16:47:15 Starting cygwin install, version 2.573.2.2
2007/07/29 16:47:15 Current Directory: C:\DOCUME~1\kr05\LOCALS~1\Temp
2007/07/29 16:47:15 Changing gid to Users
2007/07/29 16:47:15 Could not open service McShield for query, start and stop. McAfee may not be installed, or we don't have access.
2007/07/29 16:47:16 source: network install
2007/07/29 16:47:16 root: c:\cygwin text user
2007/07/29 16:47:17 Selected local directory: C:\DOCUME~1\kr05\LOCALS~1\Temp
2007/07/29 16:47:17 net: Direct
Loaded cached mirror list
get_url_to_membuf http://cygwin.com/mirrors.lst
getUrlToStream http://cygwin.com/mirrors.lst
2007/07/29 16:47:19 site: http://mirrors.kernel.org/sourceware/cygwin
get_url_to_membuf http://mirrors.kernel.org/sourceware/cygwin/setup.bz2
getUrlToStream http://mirrors.kernel.org/sourceware/cygwin/setup.bz2
Checking MD5 for file://C:\DOCUME~1\kr05\LOCALS~1\Temp/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin/release/cmake/cmake-2.4.7-1.tar.bz2
MD5 verified OK: file://C:\DOCUME~1\kr05\LOCALS~1\Temp/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin/release/cmake/cmake-2.4.7-1.tar.bz2 98520e89e50d2930ec3f559aec8c5e33
2007/07/29 16:47:36 Running preremove script for  cmake
2007/07/29 16:47:36 Uninstalling cmake
2007/07/29 16:47:36 io_stream_cygfile: fopen(/etc/setup/cmake.lst.gz) failed 2 No such file or directory
2007/07/29 16:47:36 Installing file://C:\DOCUME~1\kr05\LOCALS~1\Temp/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin/release/cmake/cmake-2.4.7-1.tar.bz2
2007/07/29 16:47:37 Visited: 303 nodes out of 851.
2007/07/29 16:47:37 Dependency ordered install:
2007/07/29 16:47:37 terminfo
2007/07/29 16:47:37 texinfo
2007/07/29 16:47:37 _update-info-dir
2007/07/29 16:47:37 libncurses8
2007/07/29 16:47:37 libreadline6
2007/07/29 16:47:37 libintl8
2007/07/29 16:47:37 bash
2007/07/29 16:47:37 base-passwd
2007/07/29 16:47:37 libiconv2
2007/07/29 16:47:37 libintl2
2007/07/29 16:47:37 cygwin
2007/07/29 16:47:37 libintl3
2007/07/29 16:47:37 alternatives
2007/07/29 16:47:37 libapr1
2007/07/29 16:47:37 libexpat0
2007/07/29 16:47:37 expat
2007/07/29 16:47:37 libdb4.2
2007/07/29 16:47:37 libgdbm4
2007/07/29 16:47:37 crypt
2007/07/29 16:47:37 libaprutil1
2007/07/29 16:47:37 zlib
2007/07/29 16:47:37 openssl
2007/07/29 16:47:37 apache2
2007/07/29 16:47:37 ash
2007/07/29 16:47:37 glib2
2007/07/29 16:47:37 glib2-runtime
2007/07/29 16:47:37 atk
2007/07/29 16:47:37 libcharset1
2007/07/29 16:47:37 libiconv
2007/07/29 16:47:37 gettext
2007/07/29 16:47:37 glib2-devel
2007/07/29 16:47:37 atk-devel
2007/07/29 16:47:37 atk-runtime
2007/07/29 16:47:37 gawk
2007/07/29 16:47:37 m4
2007/07/29 16:47:37 libdb4.3
2007/07/29 16:47:37 libbz2_1
2007/07/29 16:47:37 perl
2007/07/29 16:47:37 mktemp
2007/07/29 16:47:37 autoconf2.1
2007/07/29 16:47:37 autoconf2.5
2007/07/29 16:47:37 autoconf
2007/07/29 16:47:37 automake1.4
2007/07/29 16:47:37 automake1.5
2007/07/29 16:47:37 automake1.6
2007/07/29 16:47:37 automake1.7
2007/07/29 16:47:37 automake1.8
2007/07/29 16:47:37 automake1.9
2007/07/29 16:47:37 automake1.10
2007/07/29 16:47:37 automake
2007/07/29 16:47:37 coreutils
2007/07/29 16:47:37 findutils
2007/07/29 16:47:37 sed
2007/07/29 16:47:37 base-files
2007/07/29 16:47:37 bash-completion
2007/07/29 16:47:37 e2fsprogs
2007/07/29 16:47:37 libpopt0
2007/07/29 16:47:37 ioperm
2007/07/29 16:47:37 libpcre0
2007/07/29 16:47:37 util-linux
2007/07/29 16:47:37 bashdb
2007/07/29 16:47:37 bc
2007/07/29 16:47:37 binutils
2007/07/29 16:47:37 bison
2007/07/29 16:47:37 libbz2-devel
2007/07/29 16:47:37 tcltk
2007/07/29 16:47:37 python
2007/07/29 16:47:37 boost-devel
2007/07/29 16:47:37 libboost
2007/07/29 16:47:37 boost
2007/07/29 16:47:37 bsdiff
2007/07/29 16:47:37 bzip2
2007/07/29 16:47:37 libfreetype26
2007/07/29 16:47:37 fontconfig
2007/07/29 16:47:37 libfontconfig1
2007/07/29 16:47:37 libglitz1
2007/07/29 16:47:37 libpng12
2007/07/29 16:47:37 pcre
2007/07/29 16:47:37 xorg-x11-bin-lndir
2007/07/29 16:47:37 freetype2
2007/07/29 16:47:37 libncurses7
2007/07/29 16:47:37 termcap
2007/07/29 16:47:37 libintl1
2007/07/29 16:47:37 gzip
2007/07/29 16:47:37 tar
2007/07/29 16:47:37 run
2007/07/29 16:47:37 xterm
2007/07/29 16:47:37 X-startup-scripts
2007/07/29 16:47:37 xorg-x11-xwin
2007/07/29 16:47:37 xorg-x11-fnts
2007/07/29 16:47:37 xorg-x11-fenc
2007/07/29 16:47:37 xorg-x11-libs-data
2007/07/29 16:47:37 xorg-x11-etc
2007/07/29 16:47:37 libXft1
2007/07/29 16:47:37 libXft2
2007/07/29 16:47:37 libXft
2007/07/29 16:47:37 xorg-x11-bin
2007/07/29 16:47:37 xorg-x11-base
2007/07/29 16:47:37 xorg-x11-bin-dlls
2007/07/29 16:47:37 libcairo2
2007/07/29 16:47:37 cairo
2007/07/29 16:47:37 cairo-doc
2007/07/29 16:47:37 w32api
2007/07/29 16:47:37 mingw-runtime
2007/07/29 16:47:37 gcc-mingw-core
2007/07/29 16:47:37 gcc-core
2007/07/29 16:47:37 gcc-mingw-g++
2007/07/29 16:47:37 gcc-g++
2007/07/29 16:47:37 gcc
2007/07/29 16:47:37 ccache
2007/07/29 16:47:37 ccdoc
2007/07/29 16:47:37 check
2007/07/29 16:47:37 chere
2007/07/29 16:47:37 ncurses
2007/07/29 16:47:37 clear
2007/07/29 16:47:37 libpq4
2007/07/29 16:47:37 clisp
2007/07/29 16:47:37 cmake
2007/07/29 16:47:37 cpio
2007/07/29 16:47:37 cron
2007/07/29 16:47:37 ctags
2007/07/29 16:47:37 libssh2_1
2007/07/29 16:47:37 libcurl4
2007/07/29 16:47:37 curl
2007/07/29 16:47:37 openssl-devel
2007/07/29 16:47:37 libssh2-devel
2007/07/29 16:47:37 curl-devel
2007/07/29 16:47:37 cvs
2007/07/29 16:47:37 cvsps
2007/07/29 16:47:37 diffutils
2007/07/29 16:47:37 file
2007/07/29 16:47:37 grep
2007/07/29 16:47:37 libltdl3
2007/07/29 16:47:37 libtool1.5
2007/07/29 16:47:37 make
2007/07/29 16:47:37 patch
2007/07/29 16:47:37 unzip
2007/07/29 16:47:37 wget
2007/07/29 16:47:37 cygport
2007/07/29 16:47:37 cygrunsrv
2007/07/29 16:47:37 cygutils
2007/07/29 16:47:37 groff
2007/07/29 16:47:37 less
2007/07/29 16:47:37 man
2007/07/29 16:47:37 cygwin-doc
2007/07/29 16:47:37 d
2007/07/29 16:47:37 lesstif
2007/07/29 16:47:37 ddd
2007/07/29 16:47:37 desktop-file-utils
2007/07/29 16:47:37 diffstat
2007/07/29 16:47:37 popt
2007/07/29 16:47:37 distcc
2007/07/29 16:47:37 dmalloc
2007/07/29 16:47:37 libxml2
2007/07/29 16:47:37 docbook-xml412
2007/07/29 16:47:37 docbook-xsl
2007/07/29 16:47:37 doxygen
2007/07/29 16:47:37 ed
2007/07/29 16:47:37 editrights
2007/07/29 16:47:37 ELFIO
2007/07/29 16:47:37 xemacs-emacs-common
2007/07/29 16:47:37 emacs
2007/07/29 16:47:37 expect
2007/07/29 16:47:37 flex
2007/07/29 16:47:37 libjpeg62
2007/07/29 16:47:37 fltk
2007/07/29 16:47:37 fltk-demos
2007/07/29 16:47:37 fltk-devel
2007/07/29 16:47:37 fltk-doc
2007/07/29 16:47:37 libgd2
2007/07/29 16:47:37 gd
2007/07/29 16:47:37 gdb
2007/07/29 16:47:37 gdbm
2007/07/29 16:47:37 libgettextpo0
2007/07/29 16:47:37 gettext-devel
2007/07/29 16:47:37 ghostscript-base
2007/07/29 16:47:37 ghostscript
2007/07/29 16:47:37 libcurl3
2007/07/29 16:47:37 git
2007/07/29 16:47:37 glib
2007/07/29 16:47:37 glib-devel
2007/07/29 16:47:37 glib2-doc
2007/07/29 16:47:37 glitz
2007/07/29 16:47:37 libgmp3
2007/07/29 16:47:37 gmp
2007/07/29 16:47:37 gnuplot
2007/07/29 16:47:37 gperf
2007/07/29 16:47:37 gtk+
2007/07/29 16:47:37 gtk+-devel
2007/07/29 16:47:37 libtiff4
2007/07/29 16:47:37 pango-runtime
2007/07/29 16:47:37 pango
2007/07/29 16:47:37 gtk2-x11-runtime
2007/07/29 16:47:37 gtk2-x11
2007/07/29 16:47:37 gtk2-x11-devel
2007/07/29 16:47:37 gtk2-x11-doc
2007/07/29 16:47:37 gtk2-x11-engines
2007/07/29 16:47:37 libguile12
2007/07/29 16:47:37 libguile17
2007/07/29 16:47:37 guile
2007/07/29 16:47:37 vim
2007/07/29 16:47:37 gvim
2007/07/29 16:47:37 indent
2007/07/29 16:47:37 libjbig2
2007/07/29 16:47:37 libjbig1
2007/07/29 16:47:37 jbigkit
2007/07/29 16:47:37 libpng12-devel
2007/07/29 16:47:37 libjpeg-devel
2007/07/29 16:47:37 jpeg
2007/07/29 16:47:37 libaudiofile0
2007/07/29 16:47:37 libesound0
2007/07/29 16:47:37 libao2
2007/07/29 16:47:37 libdb4.1
2007/07/29 16:47:37 libdb4.2-devel
2007/07/29 16:47:37 libfcgi0
2007/07/29 16:47:37 libFLAC7
2007/07/29 16:47:37 libFLAC++5
2007/07/29 16:47:37 libfreetype2-devel
2007/07/29 16:47:37 libfontconfig-devel
2007/07/29 16:47:37 libgpg-error
2007/07/29 16:47:37 libgcrypt
2007/07/29 16:47:37 libXft-devel
2007/07/29 16:47:37 xorg-x11-devel
2007/07/29 16:47:37 libgd-devel
2007/07/29 16:47:37 libgdbm
2007/07/29 16:47:37 libgdbm-devel
2007/07/29 16:47:37 libgdbm3
2007/07/29 16:47:37 libglade2
2007/07/29 16:47:37 libtasn1
2007/07/29 16:47:37 libopencdk8
2007/07/29 16:47:37 libgnutls11
2007/07/29 16:47:37 libGraphicsMagick0
2007/07/29 16:47:37 libIDL
2007/07/29 16:47:37 libintl
2007/07/29 16:47:37 libkpathsea3
2007/07/29 16:47:37 libkpathsea4
2007/07/29 16:47:37 libncurses-devel
2007/07/29 16:47:37 libncurses5
2007/07/29 16:47:37 libncurses6
2007/07/29 16:47:37 libneon25
2007/07/29 16:47:37 libneon26
2007/07/29 16:47:37 libogg0
2007/07/29 16:47:37 libOggFLAC3
2007/07/29 16:47:37 libOggFLAC++2
2007/07/29 16:47:37 libplot2
2007/07/29 16:47:37 libplotter2
2007/07/29 16:47:37 libpng
2007/07/29 16:47:37 libreadline4
2007/07/29 16:47:37 libreadline5
2007/07/29 16:47:37 libspeex1
2007/07/29 16:47:37 libtiff5
2007/07/29 16:47:37 libtiff-devel
2007/07/29 16:47:37 libvorbis0
2007/07/29 16:47:37 libvorbisenc2
2007/07/29 16:47:37 libvorbisfile3
2007/07/29 16:47:37 libxdelta2
2007/07/29 16:47:37 libxmi0
2007/07/29 16:47:37 libxml2-devel
2007/07/29 16:47:37 pylibxml2
2007/07/29 16:47:37 libxml2-python
2007/07/29 16:47:37 libxslt
2007/07/29 16:47:37 login
2007/07/29 16:47:37 mc
2007/07/29 16:47:37 mhash
2007/07/29 16:47:37 minires
2007/07/29 16:47:37 Numeric
2007/07/29 16:47:37 ocaml
2007/07/29 16:47:37 OpenSP
2007/07/29 16:47:37 openjade
2007/07/29 16:47:37 openssh
2007/07/29 16:47:37 openssl097
2007/07/29 16:47:37 ORBit
2007/07/29 16:47:37 pango-devel
2007/07/29 16:47:37 pango-doc
2007/07/29 16:47:37 patchutils
2007/07/29 16:47:37 pcre-devel
2007/07/29 16:47:37 pcre-doc
2007/07/29 16:47:37 ping
2007/07/29 16:47:37 pkg-config
2007/07/29 16:47:37 pkgconfig
2007/07/29 16:47:37 pygtk2
2007/07/29 16:47:37 pylibxslt
2007/07/29 16:47:37 python-pyrex
2007/07/29 16:47:37 qt3
2007/07/29 16:47:37 qt3-bin
2007/07/29 16:47:37 qt3-devel
2007/07/29 16:47:37 qt3-doc
2007/07/29 16:47:37 readline
2007/07/29 16:47:37 rebase
2007/07/29 16:47:37 ruby
2007/07/29 16:47:37 splint
2007/07/29 16:47:37 startup-notification
2007/07/29 16:47:37 subversion
2007/07/29 16:47:37 subversion-python
2007/07/29 16:47:37 SWI-Prolog
2007/07/29 16:47:37 swig
2007/07/29 16:47:37 tcp_wrappers
2007/07/29 16:47:37 tetex-bin
2007/07/29 16:47:37 time
2007/07/29 16:47:37 uw-imap
2007/07/29 16:47:37 which
2007/07/29 16:47:37 wtf
2007/07/29 16:47:37 zip
2007/07/29 16:47:40 note: Uninstalls complete.
2007/07/29 16:47:40 Ending cygwin install

Re: CMake 2.4.7-1 ready

[Bill Hoffman]

Kovarththanan Rajaratnam wrote:
> Hello Bill,
>
> Bill Hoffman wrote:
>> Bill Hoffman wrote:
>>> I had some trouble myself when I tested the install.   I had to 
>>> unpack the tar file by hand.   I must have messed something up.  Any 
>>> ideas what?  Once unpacked by hand the cmake install was fine. -Bill
>>>
>> I have tried again myself, and if I do a reinstall, the download part 
>> works fine.  But the install stage happens really fast.  I suspect 
>> there maybe an error flashing by, but I can't see it.   Is there a 
>> way to debug setup or get more verbose output?  Thanks.
>
> I got an error similar to the one the other user reported to you (no 
> source or binary in any form). I've attached the setup log. The 
> following entry did catch my attention:
>
> 2007/07/29 16:47:36 io_stream_cygfile: fopen(/etc/setup/cmake.lst.gz) 
> failed 2 No such file or directory
>
> ------------------------------------------------------------------------
>
> 2007/07/29 16:47:15 Starting cygwin install, version 2.573.2.2
> 2007/07/29 16:47:15 Current Directory: C:\DOCUME~1\kr05\LOCALS~1\Temp
> 2007/07/29 16:47:15 Changing gid to Users
> 2007/07/29 16:47:15 Could not open service McShield for query, start and stop. McAfee may not be installed, or we don't have access.
> 2007/07/29 16:47:16 source: network install
> 2007/07/29 16:47:16 root: c:\cygwin text user
> 2007/07/29 16:47:17 Selected local directory: C:\DOCUME~1\kr05\LOCALS~1\Temp
> 2007/07/29 16:47:17 net: Direct
> Loaded cached mirror list
> get_url_to_membuf http://cygwin.com/mirrors.lst
> getUrlToStream http://cygwin.com/mirrors.lst
> 2007/07/29 16:47:19 site: http://mirrors.kernel.org/sourceware/cygwin
> get_url_to_membuf http://mirrors.kernel.org/sourceware/cygwin/setup.bz2
> getUrlToStream http://mirrors.kernel.org/sourceware/cygwin/setup.bz2
> Checking MD5 for file://C:\DOCUME~1\kr05\LOCALS~1\Temp/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin/release/cmake/cmake-2.4.7-1.tar.bz2
> MD5 verified OK: file://C:\DOCUME~1\kr05\LOCALS~1\Temp/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin/release/cmake/cmake-2.4.7-1.tar.bz2 98520e89e50d2930ec3f559aec8c5e33
> 2007/07/29 16:47:36 Running preremove script for  cmake
> 2007/07/29 16:47:36 Uninstalling cmake
> 2007/07/29 16:47:36 io_stream_cygfile: fopen(/etc/setup/cmake.lst.gz) failed 2 No such file or directory
> 2007/07/29 16:47:36 Installing file://C:\DOCUME~1\kr05\LOCALS~1\Temp/http%3a%2f%2fmirrors.kernel.org%2fsourceware%2fcygwin/release/cmake/cmake-2.4.7-1.tar.bz2
> 2007/07/29 16:47:37 Visited: 303 nodes out of 851.
> 2007/07/29 16:47:37 Dependency ordered install:
>   
OK, I am lost here.   Apparently my recent CMake 2.4.7 files are broken 
for cygwin setup for some reason.  Has anything changed in cygwin setup 
recently in the untar section?   Is there a more verbose mode that setup 
can be run in?  

Any help or ideas would be appreciated.

Thanks.

-Bill

Re: CMake 2.4.7-1 ready

[Brian Dessent]

Bill Hoffman wrote:

> OK, I am lost here.   Apparently my recent CMake 2.4.7 files are broken
> for cygwin setup for some reason.  Has anything changed in cygwin setup
> recently in the untar section?   Is there a more verbose mode that setup
> can be run in?

No, nothing's changed in the untar code in forever.  I debugged it and
the problem is that setup does not recognise the file as a valid tar
archive.  What version of tar did you use to create it?

The problem is the 'magic' field of the tar header (offset 257).  Setup
expects this to contain "ustar" followed by two spaces and a trailing
NUL:

    62    if (original->peek (magic, longest_magic) > 0)
    63      {
    64        if (memcmp (&magic[257], "ustar\040\040\0", 8) == 0)
    65          {
    66            /* tar */
    67            archive_tar *rv = new archive_tar (original);
    68            if (!rv->error ())
    69              return rv;
    70            return NULL;
    71          }

However, the cmake-2.4.7-1.tar does not contain this magic field (it
contains "ustar\0" followed by "00") so setup does not think it's a
valid tar file.  I tried simply repacking the file with command line tar
and it has the proper magic, so I can only conclude that whatever tar or
tar options you used were not compatible.

Setup should give a better log file diagnostic in this case though, and
I'll work on that now.

Brian

Re: CMake 2.4.7-1 ready

[Bill Hoffman]

Brian Dessent wrote:
> Bill Hoffman wrote:
>
>   
>> OK, I am lost here.   Apparently my recent CMake 2.4.7 files are broken
>> for cygwin setup for some reason.  Has anything changed in cygwin setup
>> recently in the untar section?   Is there a more verbose mode that setup
>> can be run in?
>>     
>
> No, nothing's changed in the untar code in forever.  I debugged it and
> the problem is that setup does not recognise the file as a valid tar
> archive.  What version of tar did you use to create it?
>
>   
We are using lib tar to create it.  It is part of CMake called CPack 
which is used to create various
packages automatically.   It worked fine for the last release of cmake, 
and it works fine from tar
on the command line.  The command line tar must be more forgiving.    I 
will try to figure out where
the magic has gone... 

Thanks much, for looking into this for me.

-Bill

Re: CMake 2.4.7-1 ready

[Bill Hoffman]

Brian Dessent wrote:
>
> No, nothing's changed in the untar code in forever.  I debugged it and
> the problem is that setup does not recognise the file as a valid tar
> archive.  What version of tar did you use to create it?
>
> The problem is the 'magic' field of the tar header (offset 257).  Setup
> expects this to contain "ustar" followed by two spaces and a trailing
> NUL:
>
>     62    if (original->peek (magic, longest_magic) > 0)
>     63      {
>     64        if (memcmp (&magic[257], "ustar\040\040\0", 8) == 0)
>     65          {
>     66            /* tar */
>     67            archive_tar *rv = new archive_tar (original);
>     68            if (!rv->error ())
>     69              return rv;
>     70            return NULL;
>     71          }
>   
OK, I looked at the libtar code and found this:
  if (t->options & TAR_GNU)
    strncpy(t->th_buf.magic, "ustar  ", 8);
  else
  {
    strncpy(t->th_buf.version, TVERSION, TVERSLEN);
    strncpy(t->th_buf.magic, TMAGIC, TMAGLEN);
  }

#define  TMAGIC    "ustar"  /* ustar and a null */
#define  TMAGLEN    6
#define  TVERSION  "00"  /* 00 and no null */
#define  TVERSLEN  2

So, that explains why the tar file works, it is just not a gnu tar file.  
Something must have changed in my code because the 2.4.6 version
has the gnu style header and the 2.4.7 version has the other header.
I will try and figure out what changed and create a new release.

-Bill

Re: CMake 2.4.7-1 ready

[Bill Hoffman]

OK, I have figured out what happened.  CMake 2.4.7-1 was the first release
of cmake done with cpack for cygwin.  It was not generating gnu style 
tar files.
I have changed that, so it should work with setup now. 

Corinna, can you please upload:

http://www.cmake.org/files/cygwin/cmake-2.4.7-2.tar.bz2
http://www.cmake.org/files/cygwin/cmake-2.4.7-2-src.tar.bz2

cmake-2.4.7-1 should be removed as it does not work with setup.

Thanks for all the help.

-Bill

Re: CMake 2.4.7-1 ready

[Brian Dessent]

Bill Hoffman wrote:

> So, that explains why the tar file works, it is just not a gnu tar file.
> Something must have changed in my code because the 2.4.6 version
> has the gnu style header and the 2.4.7 version has the other header.
> I will try and figure out what changed and create a new release.

Bill Hoffman wrote:

> OK, I have figured out what happened.  CMake 2.4.7-1 was the first release
> of cmake done with cpack for cygwin.  It was not generating gnu style
> tar files.
> I have changed that, so it should work with setup now.

I've also updated setup to accept the tar magic of just "ustar\0", so
those cpack tar files should now work (I tested with the cmake package
and it extracted OK.)  And if it happens again the user should get a
dialog about invalid tar format instead of it silently just doing
nothing.

Of course this won't take effect until the next setup release (unless
you use a snapshot) so bumping the cmake packages is still a good idea.

( http://cygwin.com/setup/snapshots/setup-2.577.exe )

Brian

Re: CMake 2.4.7-1 ready

[Bill Hoffman]

Brian Dessent wrote:
> Bill Hoffman wrote:
>
>   
>> So, that explains why the tar file works, it is just not a gnu tar file.
>> Something must have changed in my code because the 2.4.6 version
>> has the gnu style header and the 2.4.7 version has the other header.
>> I will try and figure out what changed and create a new release.
>>     
>
> Bill Hoffman wrote:
>
>   
>> OK, I have figured out what happened.  CMake 2.4.7-1 was the first release
>> of cmake done with cpack for cygwin.  It was not generating gnu style
>> tar files.
>> I have changed that, so it should work with setup now.
>>     
>
> I've also updated setup to accept the tar magic of just "ustar\0", so
> those cpack tar files should now work (I tested with the cmake package
> and it extracted OK.)  And if it happens again the user should get a
> dialog about invalid tar format instead of it silently just doing
> nothing.
>
> Of course this won't take effect until the next setup release (unless
> you use a snapshot) so bumping the cmake packages is still a good idea.
>
> ( http://cygwin.com/setup/snapshots/setup-2.577.exe )
>   
Sounds good, thanks again for the help.  I never would have figured this 
out, and it sounds like
we both learned something about tar magic...

-Bill

Re: CMake 2.4.7-1 ready

[Bill Hoffman]

Bill Hoffman wrote:
>
>>
>> Of course this won't take effect until the next setup release (unless
>> you use a snapshot) so bumping the cmake packages is still a good idea.
>>
>> ( http://cygwin.com/setup/snapshots/setup-2.577.exe )
>>   
> Sounds good, thanks again for the help.  I never would have figured 
> this out, and it sounds like
> we both learned something about tar magic...
I just found a small problem with the 2.4.7-2, and have removed it from 
our web site.
I will assume it has not yet been downloaded, and will but up a new 
2.4.7-2 in the morning.

-Bill

Re: CMake 2.4.7-1 ready

[Bill Hoffman]

Bill Hoffman wrote:
> I just found a small problem with the 2.4.7-2, and have removed it 
> from our web site.
> I will assume it has not yet been downloaded, and will but up a new 
> 2.4.7-2 in the morning.
OK, 2.4.7-2 is ready for download here:

http://www.cmake.org/files/cygwin/cmake-2.4.7-2.tar.bz2
http://www.cmake.org/files/cygwin/cmake-2.4.7-2-src.tar.bz2

These files have the gnu tar magic in them.

Thanks.

-Bill

Re: CMake 2.4.7-1 ready

[Corinna Vinschen]

On Jul 31 10:20, Bill Hoffman wrote:
> http://www.cmake.org/files/cygwin/cmake-2.4.7-2.tar.bz2
> http://www.cmake.org/files/cygwin/cmake-2.4.7-2-src.tar.bz2

Uploaded and 2.4.7-1 removed.


Thanks,
Corinna

-- 
Corinna Vinschen                  Please, send mails regarding Cygwin to
Cygwin Project Co-Leader          cygwin AT cygwin DOT com
Red Hat