* Re: info - again
1999-04-26 8:48 ` R. Hickling
@ 1999-04-26 10:00 ` Mumit Khan
1999-04-30 18:32 ` Mumit Khan
1999-04-26 15:11 ` Kevin Wright
` (2 subsequent siblings)
3 siblings, 1 reply; 16+ messages in thread
From: Mumit Khan @ 1999-04-26 10:00 UTC (permalink / raw)
To: R. Hickling; +Cc: cygwin
"R. Hickling" <hicklinr@mcd.alcatel.be> writes:
>
> './configure' worked fine.
> 'make' got past 'util' but failed in 'doc':
> ------------------------------------------------------------
> Making all in doc
> ../makeinfo/makeinfo -I. `echo info-stnd.texi | sed 's,.*/,,'`
> info-stnd.texi: No such file or directory
> make[2]: *** [info-stnd.info] Error 2
> make[1]: *** [all-recursive] Error 1
> make: *** [all-recursive-am] Error 2
> ------------------------------------------------------------
You'll need to do some digging to see what is going wrong. This is what
I did with texinfo-3.12 when I did the initial build (I'm using the
original B20.1 Cygwin1 DLL on an NT 4.0SP3 machine):
$ tar zxvf texinfo-3.12.tar.gz
$ mkdir texinfo-3.12/BUILD
$ cd texinfo-3.12/BUILD
$ ../configure --prefix=/Cygnus/cygwin-b20 \
--exec-prefix=/Cygnus/cygwin-b20/H-i586-cygwin32 -v i586-cygwin32
$ make CC="gcc -I/usr/local/include"
my /usr/local/include contains all sorts of stuff like termcap, ncurses,
zlib, etc. I believe I have most of what Andy Piper distributes.
This is all from memory, but it's simple enough that it's a safe bet that
I haven't forgotten too much.
In your case, why don't you just tell make to ignore errors and go
forward? ie.,
$ make -i
and see what happens?
Regards,
Mumit
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: info - again
1999-04-26 10:00 ` Mumit Khan
@ 1999-04-30 18:32 ` Mumit Khan
0 siblings, 0 replies; 16+ messages in thread
From: Mumit Khan @ 1999-04-30 18:32 UTC (permalink / raw)
To: R. Hickling; +Cc: cygwin
"R. Hickling" <hicklinr@mcd.alcatel.be> writes:
>
> './configure' worked fine.
> 'make' got past 'util' but failed in 'doc':
> ------------------------------------------------------------
> Making all in doc
> ../makeinfo/makeinfo -I. `echo info-stnd.texi | sed 's,.*/,,'`
> info-stnd.texi: No such file or directory
> make[2]: *** [info-stnd.info] Error 2
> make[1]: *** [all-recursive] Error 1
> make: *** [all-recursive-am] Error 2
> ------------------------------------------------------------
You'll need to do some digging to see what is going wrong. This is what
I did with texinfo-3.12 when I did the initial build (I'm using the
original B20.1 Cygwin1 DLL on an NT 4.0SP3 machine):
$ tar zxvf texinfo-3.12.tar.gz
$ mkdir texinfo-3.12/BUILD
$ cd texinfo-3.12/BUILD
$ ../configure --prefix=/Cygnus/cygwin-b20 \
--exec-prefix=/Cygnus/cygwin-b20/H-i586-cygwin32 -v i586-cygwin32
$ make CC="gcc -I/usr/local/include"
my /usr/local/include contains all sorts of stuff like termcap, ncurses,
zlib, etc. I believe I have most of what Andy Piper distributes.
This is all from memory, but it's simple enough that it's a safe bet that
I haven't forgotten too much.
In your case, why don't you just tell make to ignore errors and go
forward? ie.,
$ make -i
and see what happens?
Regards,
Mumit
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* RE: info - again
1999-04-26 8:48 ` R. Hickling
1999-04-26 10:00 ` Mumit Khan
@ 1999-04-26 15:11 ` Kevin Wright
1999-04-30 6:14 ` Glenn Spell
1999-04-30 18:32 ` Kevin Wright
1999-04-27 3:06 ` David Starks-Browning
1999-04-30 18:32 ` R. Hickling
3 siblings, 2 replies; 16+ messages in thread
From: Kevin Wright @ 1999-04-26 15:11 UTC (permalink / raw)
To: 'R. Hickling', 'Mumit Khan'; +Cc: cygwin
"R. Hickling" <hicklinr@mcd.alcatel.be> writes:
> './configure' worked fine.
> 'make' got past 'util' but failed in 'doc':
> ------------------------------------------------------------
> Making all in doc
> ../makeinfo/makeinfo -I. `echo info-stnd.texi | sed 's,.*/,,'`
> info-stnd.texi: No such file or directory
> make[2]: *** [info-stnd.info] Error 2
> make[1]: *** [all-recursive] Error 1
> make: *** [all-recursive-am] Error 2
> ------------------------------------------------------------
I remember getting errors like that and I managed to
get to work by converting the .texi files from dos to unix
using trans. I can't remember where I got trans.exe but when
I run it, it returns this info:
trans.exe 7.8 - (c) Kai Uwe Rommel - Feb 01 1994
Hope this helps,
Kevin
> -----Original Message-----
> From: cygwin-owner@sourceware.cygnus.com
> [ mailto:cygwin-owner@sourceware.cygnus.com]On Behalf Of R. Hickling
> Sent: Monday, April 26, 1999 8:49 AM
> To: Mumit Khan
> Cc: cygwin@sourceware.cygnus.com
> Subject: Re: info - again
>
>
> > > I have a 'dir' in '/usr/local/info', and 'info' runs,
> displaying its
> > > 'Top' node.
> > > However, when I do 'm<whatever>' or even just 'h' it says
> > > Info: No such file or directory
> > > in the minibuffer. It does the same irrespective of my
> 'INFOPATH' or
> > > '--directory' (which I set to '/usr/local/info' which is
> where all my
> > > '.info...' files are).
> > > What else do I need to do?
> > You may just want to pull down texinfo and build it
> yourself. It does work
> > for me, and I'm surprised that it's not working with your
> setup even with
> > INFOPATH or --directory option!
> > The only gotcha in building it, if I remember correctly, is
> that you may
> > need to get termcap.h, which was left out of Cygwin b20.1.
> The termcap
> > library itself is part of the distribution, so that part is ok.
>
> './configure' worked fine.
> 'make' got past 'util' but failed in 'doc':
> ------------------------------------------------------------
> Making all in doc
> ../makeinfo/makeinfo -I. `echo info-stnd.texi | sed 's,.*/,,'`
> info-stnd.texi: No such file or directory
> make[2]: *** [info-stnd.info] Error 2
> make[1]: *** [all-recursive] Error 1
> make: *** [all-recursive-am] Error 2
> ------------------------------------------------------------
>
>
>
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com
>
>
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: info - again
1999-04-26 15:11 ` Kevin Wright
@ 1999-04-30 6:14 ` Glenn Spell
1999-04-30 18:32 ` Glenn Spell
1999-04-30 18:32 ` Kevin Wright
1 sibling, 1 reply; 16+ messages in thread
From: Glenn Spell @ 1999-04-30 6:14 UTC (permalink / raw)
To: cygwin
Kevin Wright wrote:
>
> I remember getting errors like that and I managed to
> get to work by converting the .texi files from dos to unix
> using trans. I can't remember where I got trans.exe but when
> I run it, it returns this info:
> trans.exe 7.8 - (c) Kai Uwe Rommel - Feb 01 1994
I found that when converting multiple files, trans would crash.
A precompiled "flip" with docs can be found at
< http://www.fay.nc.us/~glenn/cygwin/ >.
-glenn
--
) Glenn Spell <glenn@gs.fay.nc.us> ) _ _____
) Fayetteville, North Carolina, C. S. A. )_ (__\____o /_/_ |
) _ _ _ _ _ _ _ _ _ _ _ _ _ _ ) >-----._/_/__]>
)- blue skies - happy trails - sweet dreams -) `0 |
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: info - again
1999-04-30 6:14 ` Glenn Spell
@ 1999-04-30 18:32 ` Glenn Spell
0 siblings, 0 replies; 16+ messages in thread
From: Glenn Spell @ 1999-04-30 18:32 UTC (permalink / raw)
To: cygwin
Kevin Wright wrote:
>
> I remember getting errors like that and I managed to
> get to work by converting the .texi files from dos to unix
> using trans. I can't remember where I got trans.exe but when
> I run it, it returns this info:
> trans.exe 7.8 - (c) Kai Uwe Rommel - Feb 01 1994
I found that when converting multiple files, trans would crash.
A precompiled "flip" with docs can be found at
< http://www.fay.nc.us/~glenn/cygwin/ >.
-glenn
--
) Glenn Spell <glenn@gs.fay.nc.us> ) _ _____
) Fayetteville, North Carolina, C. S. A. )_ (__\____o /_/_ |
) _ _ _ _ _ _ _ _ _ _ _ _ _ _ ) >-----._/_/__]>
)- blue skies - happy trails - sweet dreams -) `0 |
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* RE: info - again
1999-04-26 15:11 ` Kevin Wright
1999-04-30 6:14 ` Glenn Spell
@ 1999-04-30 18:32 ` Kevin Wright
1 sibling, 0 replies; 16+ messages in thread
From: Kevin Wright @ 1999-04-30 18:32 UTC (permalink / raw)
To: 'R. Hickling', 'Mumit Khan'; +Cc: cygwin
"R. Hickling" <hicklinr@mcd.alcatel.be> writes:
> './configure' worked fine.
> 'make' got past 'util' but failed in 'doc':
> ------------------------------------------------------------
> Making all in doc
> ../makeinfo/makeinfo -I. `echo info-stnd.texi | sed 's,.*/,,'`
> info-stnd.texi: No such file or directory
> make[2]: *** [info-stnd.info] Error 2
> make[1]: *** [all-recursive] Error 1
> make: *** [all-recursive-am] Error 2
> ------------------------------------------------------------
I remember getting errors like that and I managed to
get to work by converting the .texi files from dos to unix
using trans. I can't remember where I got trans.exe but when
I run it, it returns this info:
trans.exe 7.8 - (c) Kai Uwe Rommel - Feb 01 1994
Hope this helps,
Kevin
> -----Original Message-----
> From: cygwin-owner@sourceware.cygnus.com
> [ mailto:cygwin-owner@sourceware.cygnus.com]On Behalf Of R. Hickling
> Sent: Monday, April 26, 1999 8:49 AM
> To: Mumit Khan
> Cc: cygwin@sourceware.cygnus.com
> Subject: Re: info - again
>
>
> > > I have a 'dir' in '/usr/local/info', and 'info' runs,
> displaying its
> > > 'Top' node.
> > > However, when I do 'm<whatever>' or even just 'h' it says
> > > Info: No such file or directory
> > > in the minibuffer. It does the same irrespective of my
> 'INFOPATH' or
> > > '--directory' (which I set to '/usr/local/info' which is
> where all my
> > > '.info...' files are).
> > > What else do I need to do?
> > You may just want to pull down texinfo and build it
> yourself. It does work
> > for me, and I'm surprised that it's not working with your
> setup even with
> > INFOPATH or --directory option!
> > The only gotcha in building it, if I remember correctly, is
> that you may
> > need to get termcap.h, which was left out of Cygwin b20.1.
> The termcap
> > library itself is part of the distribution, so that part is ok.
>
> './configure' worked fine.
> 'make' got past 'util' but failed in 'doc':
> ------------------------------------------------------------
> Making all in doc
> ../makeinfo/makeinfo -I. `echo info-stnd.texi | sed 's,.*/,,'`
> info-stnd.texi: No such file or directory
> make[2]: *** [info-stnd.info] Error 2
> make[1]: *** [all-recursive] Error 1
> make: *** [all-recursive-am] Error 2
> ------------------------------------------------------------
>
>
>
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com
>
>
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: info - again
1999-04-26 8:48 ` R. Hickling
1999-04-26 10:00 ` Mumit Khan
1999-04-26 15:11 ` Kevin Wright
@ 1999-04-27 3:06 ` David Starks-Browning
1999-04-30 18:32 ` David Starks-Browning
1999-04-30 18:32 ` R. Hickling
3 siblings, 1 reply; 16+ messages in thread
From: David Starks-Browning @ 1999-04-27 3:06 UTC (permalink / raw)
To: R. Hickling; +Cc: cygwin
On Monday 26 Apr 99, R. Hickling writes:
>
> './configure' worked fine.
> 'make' got past 'util' but failed in 'doc':
> ------------------------------------------------------------
> Making all in doc
> ../makeinfo/makeinfo -I. `echo info-stnd.texi | sed 's,.*/,,'`
> info-stnd.texi: No such file or directory
> make[2]: *** [info-stnd.info] Error 2
> make[1]: *** [all-recursive] Error 1
> make: *** [all-recursive-am] Error 2
> ------------------------------------------------------------
I don't know if this is the cause of your specific problem, but I
found it necessary to do two extra things before I could build texinfo
successfully:
1. Delete or rename the "makinfo.exe" supplied with cygwin. This
is written as a no-op.
2. Replace cygwin's "install.exe" with one that works on *.exe
files. I found one at
< ftp://ftp.franken.de/pub/win32/develop/gnuwin32/cygwin/porters/Humblet_Pierre_A/install-cygwin-b20-sh >
Regards,
David
-------------------------------------------------------------------
David Starks-Browning | starksb@ebi.ac.uk
EMBL Outstation -- |
The European Bioinformatics Institute |
Wellcome Trust Genome Campus | tel: +44 (1223) 494 616
Hinxton, Cambridge, CB10 1SD, UK | fax: +44 (1223) 494 468
-------------------------------------------------------------------
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: info - again
1999-04-27 3:06 ` David Starks-Browning
@ 1999-04-30 18:32 ` David Starks-Browning
0 siblings, 0 replies; 16+ messages in thread
From: David Starks-Browning @ 1999-04-30 18:32 UTC (permalink / raw)
To: R. Hickling; +Cc: cygwin
On Monday 26 Apr 99, R. Hickling writes:
>
> './configure' worked fine.
> 'make' got past 'util' but failed in 'doc':
> ------------------------------------------------------------
> Making all in doc
> ../makeinfo/makeinfo -I. `echo info-stnd.texi | sed 's,.*/,,'`
> info-stnd.texi: No such file or directory
> make[2]: *** [info-stnd.info] Error 2
> make[1]: *** [all-recursive] Error 1
> make: *** [all-recursive-am] Error 2
> ------------------------------------------------------------
I don't know if this is the cause of your specific problem, but I
found it necessary to do two extra things before I could build texinfo
successfully:
1. Delete or rename the "makinfo.exe" supplied with cygwin. This
is written as a no-op.
2. Replace cygwin's "install.exe" with one that works on *.exe
files. I found one at
< ftp://ftp.franken.de/pub/win32/develop/gnuwin32/cygwin/porters/Humblet_Pierre_A/install-cygwin-b20-sh >
Regards,
David
-------------------------------------------------------------------
David Starks-Browning | starksb@ebi.ac.uk
EMBL Outstation -- |
The European Bioinformatics Institute |
Wellcome Trust Genome Campus | tel: +44 (1223) 494 616
Hinxton, Cambridge, CB10 1SD, UK | fax: +44 (1223) 494 468
-------------------------------------------------------------------
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: info - again
1999-04-26 8:48 ` R. Hickling
` (2 preceding siblings ...)
1999-04-27 3:06 ` David Starks-Browning
@ 1999-04-30 18:32 ` R. Hickling
3 siblings, 0 replies; 16+ messages in thread
From: R. Hickling @ 1999-04-30 18:32 UTC (permalink / raw)
To: Mumit Khan; +Cc: cygwin
> > I have a 'dir' in '/usr/local/info', and 'info' runs, displaying its
> > 'Top' node.
> > However, when I do 'm<whatever>' or even just 'h' it says
> > Info: No such file or directory
> > in the minibuffer. It does the same irrespective of my 'INFOPATH' or
> > '--directory' (which I set to '/usr/local/info' which is where all my
> > '.info...' files are).
> > What else do I need to do?
> You may just want to pull down texinfo and build it yourself. It does work
> for me, and I'm surprised that it's not working with your setup even with
> INFOPATH or --directory option!
> The only gotcha in building it, if I remember correctly, is that you may
> need to get termcap.h, which was left out of Cygwin b20.1. The termcap
> library itself is part of the distribution, so that part is ok.
'./configure' worked fine.
'make' got past 'util' but failed in 'doc':
------------------------------------------------------------
Making all in doc
../makeinfo/makeinfo -I. `echo info-stnd.texi | sed 's,.*/,,'`
info-stnd.texi: No such file or directory
make[2]: *** [info-stnd.info] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all-recursive-am] Error 2
------------------------------------------------------------
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 16+ messages in thread