* bash wrapping problem
@ 2000-09-16 11:12 Ed Hourigan
2000-09-16 15:48 ` Andreas Eibach
0 siblings, 1 reply; 7+ messages in thread
From: Ed Hourigan @ 2000-09-16 11:12 UTC (permalink / raw)
To: cygwin
[-- Attachment #1: Type: text/plain, Size: 612 bytes --]
Hi - just upgraded to cygwin latest and greatest. I have a minor
(and annoying) issue. In bash, if I do an ls, the output all goes
on one line -- i.e no CR/LF. I have to enter the clear
command to fix the error. This only seems to happen if the directory
has "a lot" of files in it. My monitor is only 15 inches. Do I need to
configure bash for smaller screens?
Thanks.
-----------------------------------------------------
"Life's too short for cheap beer. Buy the good stuff!!!"
Ed Hourigan.vcf
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
[-- Attachment #2: Ed_Hourigan.vcf --]
[-- Type: text/vcard, Size: 122 bytes --]
BEGIN:VCARD
VERSION:2.1
N:Hourigan;Ed
FN:Ed Hourigan
EMAIL;PREF;INTERNET:edh@twcny.rr.com
REV:20000818T014034Z
END:VCARD
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bash wrapping problem
2000-09-16 11:12 bash wrapping problem Ed Hourigan
@ 2000-09-16 15:48 ` Andreas Eibach
2000-09-16 16:12 ` Chris Faylor
0 siblings, 1 reply; 7+ messages in thread
From: Andreas Eibach @ 2000-09-16 15:48 UTC (permalink / raw)
To: cygwin
----- Original Message -----
From: "Ed Hourigan" <edh@twcny.rr.com>
To: <cygwin@sourceware.cygnus.com>
Sent: Saturday, September 16, 2000 8:08 PM
Subject: bash wrapping problem
> Hi - just upgraded to cygwin latest and greatest. I have a minor
> (and annoying) issue. In bash, if I do an ls, the output all goes
> on one line -- i.e no CR/LF. I have to enter the clear
> command to fix the error. This only seems to happen if the directory
> has "a lot" of files in it. My monitor is only 15 inches. Do I need to
> configure bash for smaller screens?
>
> Thanks.
Hello Ed,
the same bug occurs if you TEMPORARILY quit cygwin bash to Win9X and
relaunch it with the icon in the taskbar.
If you're in full screen mode, a few void presses of [RETURN] will stop the
vertical
scrolling of the text and go into the horizontal instead.
I know this bug and i reported it here - BUT NO ONE ANSWERED YET to confirm
my
report! *Sigh*...
So long
Andreas
sourceware.cygnus.com
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bash wrapping problem
2000-09-16 15:48 ` Andreas Eibach
@ 2000-09-16 16:12 ` Chris Faylor
2000-09-17 5:36 ` Ed Hourigan
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Chris Faylor @ 2000-09-16 16:12 UTC (permalink / raw)
To: cygwin; +Cc: edh, a.eibach
On Sat, Sep 16, 2000 at 05:21:59PM +0200, Andreas Eibach wrote:
>----- Original Message -----
>From: "Ed Hourigan" <edh@twcny.rr.com>
>To: <cygwin@sourceware.cygnus.com>
>Sent: Saturday, September 16, 2000 8:08 PM
>Subject: bash wrapping problem
>
>
>> Hi - just upgraded to cygwin latest and greatest. I have a minor
>> (and annoying) issue. In bash, if I do an ls, the output all goes
>> on one line -- i.e no CR/LF. I have to enter the clear
>> command to fix the error. This only seems to happen if the directory
>> has "a lot" of files in it. My monitor is only 15 inches. Do I need to
>> configure bash for smaller screens?
>
>the same bug occurs if you TEMPORARILY quit cygwin bash to Win9X and
>relaunch it with the icon in the taskbar.
What does it mean to "TEMPORARILY quit" cygwin bash? Are you saying that
you minimize the window and then restore it by clicking on the icon?
Are you clicking on another window and then clicking on the icon to
gain focus in the cygwin bash window?
It would be instructive to see the output of "cygcheck -r -s -v" and
of "cygcheck ls". Apologies if you've already sent this but I suspect
that you haven't sent "cygcheck ls", at least.
cgf
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 7+ messages in thread* RE: bash wrapping problem
2000-09-16 16:12 ` Chris Faylor
@ 2000-09-17 5:36 ` Ed Hourigan
2000-09-17 6:05 ` Ed Hourigan
2000-09-18 6:47 ` Andreas Eibach
2 siblings, 0 replies; 7+ messages in thread
From: Ed Hourigan @ 2000-09-17 5:36 UTC (permalink / raw)
To: cygwin, cygwin; +Cc: a.eibach
Ok, here is cygcheck -r -s -v: ( cygcheck ls follows after )
Cygnus Win95/NT Configuration Diagnostics
Current System Time: Sun Sep 17 08:10:14 2000
Win9X Ver 4.10 build 67766446 A
Path: /usr/local/bin
/usr/bin
/usr/bin
/cygdrive/c/WINDOWS
/cygdrive/c/WINDOWS/COMMAND
/cygdrive/c/WINDOWS/TWAIN_32/SCANWIZ
/cygdrive/c/WINDOWS/TWAIN/SCANWIZ
SysDir: C:\WINDOWS\SYSTEM
WinDir: C:\WINDOWS
HOME = `/home/beerman'
MAKE_MODE = `unix'
PWD = `/'
USER = `beerman'
!C: = `C:\WINDOWS'
!D: = `D:\PROGRAM FILES\MICROSOFT OFFICE\OFFICE'
!E: = `E:\cygwin\bin'
BLASTER = `A220 I2 D1'
CMDLINE = `bash --login -i'
COMSPEC = `C:\WINDOWS\COMMAND.COM'
HOSTNAME = `EDHOURIG'
HOSTTYPE = `i586'
MACHTYPE = `i586-pc-cygwin'
OLDPWD = `/home/beerman/gcc_2.95.2/blddir'
OSTYPE = `cygwin'
PROMPT = `$p$g'
PS1 = `>'
SHELL = `/bin/sh'
SHLVL = `1'
TEMP = `/cygdrive/c/WINDOWS/TEMP'
TERM = `cygwin'
WINBOOTDIR = `C:\WINDOWS'
WINDIR = `C:\WINDOWS'
_ = `/usr/bin/cygcheck'
TZ = `EST5EDT4,M4.1.0/2,M10.5.0/2'
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\MenuOrd
er\Start Menu\&Programs\Cygnus Solutions
(default) = (unsupported type)
HKEY_CURRENT_USER\Software\Cygnus Solutions
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\00
(default) = `C:'
unix = `/'
fbinary = 0x00000000
fsilent = 0x00000000
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2
(default) = `/cygdrive'
cygdrive flags = 0x00000020
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/
(default) = `E:/cygwin'
flags = 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/usr/bin
(default) = `E:/cygwin/bin'
flags = 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/usr/lib
(default) = `E:/cygwin/lib'
flags = 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\./projects
(default) = `\cygdrive\Projects'
flags = 0x00000000
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/drive_e
(default) = `E:'
flags = 0x00000000
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\Program Options
HKEY_LOCAL_MACHINE\Software\Symantec\IAM\FirewallObjects\Applications\SETUP
- CYGNUS SETUP (GCC FOR WIN9X).EXE
(default) = `C:\WINDOWS\PROFILES\KAREN\DESKTOP\DOWNLOADS\SETUP - CYGNUS
SETUP (GCC FOR WIN9X).EXE'
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\Cygwin B20
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\Cygwin B20\B20.1
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\GNUPro
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\GNUPro\i586-cygwin32
HKEY_LOCAL_MACHINE\Software\Cygnus
Solutions\GNUPro\i586-cygwin32\i586-cygwin32
HKEY_LOCAL_MACHINE\Software\Cygnus
Solutions\GNUPro\i586-cygwin32\i586-cygwin32\cygwin-B20.1
(default) = `e:\cygnus\cygwin-b20'
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL setup
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\00
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\01
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\02
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\03
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\04
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\05
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\06
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\07
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\08
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\09
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\0A
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\0B
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\0C
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\0D
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\0E
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\0F
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\10
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\11
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\12
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\13
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\14
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\15
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\16
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\17
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\18
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\19
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\1A
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\1B
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\1C
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\1D
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\Cygwin
HKEY_LOCAL_MACHINE\Software\Cygnus Solutions\Cygwin\mounts v2
a: fd N/A N/A
c: hd FAT32 2583Mb 57% CP UN SYS_DISK
d: hd FAT32 2428Mb 28% CP UN DATA
e: hd FAT32 3930Mb 62% CP UN PROGRAMS
f: fd N/A N/A
g: cd N/A N/A
\cygdrive\Projects ./projects user textmode
E:\cygwin\bin /usr/bin user binmode
E:\cygwin\lib /usr/lib user binmode
E:\cygwin / user binmode
E: /drive_e user textmode
Found: E:\cygwin\bin\bash.exe
Found: E:\cygwin\bin\cat.exe
Found: E:\cygwin\bin\cpp.exe
Found: E:\cygwin\bin\find.exe
Found: c:\WINDOWS\COMMAND\find.exe
Warning: E:\cygwin\bin\find.exe hides c:\WINDOWS\COMMAND\find.exe
Found: E:\cygwin\bin\gcc.exe
Found: E:\cygwin\bin\gdb.exe
Found: E:\cygwin\bin\ld.exe
Found: E:\cygwin\bin\ls.exe
Found: E:\cygwin\bin\make.exe
Found: E:\cygwin\bin\sh.exe
83k 2000/06/11 E:\cygwin\bin\cygitcl30.dll - os=4.0 img=1.0 sys=4.0
"cygitcl30.dll" v0.0 ts=2000/6/10 23:34
35k 2000/06/11 E:\cygwin\bin\cygitk30.dll - os=4.0 img=1.0 sys=4.0
"cygitk30.dll" v0.0 ts=2000/6/10 23:34
402k 2000/06/11 E:\cygwin\bin\cygtcl80.dll - os=4.0 img=1.0 sys=4.0
"cygtcl80.dll" v0.0 ts=2000/6/10 23:30
5k 2000/06/11 E:\cygwin\bin\cygtclpip80.dll - os=4.0 img=1.0 sys=4.0
10k 2000/06/11 E:\cygwin\bin\cygtclreg80.dll - os=4.0 img=1.0 sys=4.0
"cygtclreg80.dll" v0.0 ts=2000/6/10 23:30
639k 2000/06/11 E:\cygwin\bin\cygtk80.dll - os=4.0 img=1.0 sys=4.0
"cygtk80.dll" v0.0 ts=2000/6/10 23:34
586k 2000/08/04 E:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0
"cygwin1.dll" v0.0 ts=2000/8/3 20:53
Cygwin DLL version info:
dll major: 1001
dll minor: 4
dll epoch: 19
dll bad signal mask: 19005
dll old termios: 5
api major: 0
api minor: 26
shared data: 3
dll identifier: cygwin1
mount registry: 2
cygnus registry name: Cygnus Solutions
cygwin registry name: Cygwin
program options name: Program Options
cygwin mount registry name: mounts v2
build date: Thu Aug 3 20:53:46 EDT 2000
CVS tag: cygwin-1-1-4
shared id: cygwin1S3
Use -h to see help about each section
-------
And here is cygcheck ls:
Found: E:\cygwin\bin\ls.exe
E:\cygwin\bin\ls.exe
E:\cygwin\bin\cygwin1.dll
C:\WINDOWS\SYSTEM\KERNEL32.dll
Use -h to see help about each section
-----Original Message-----
From: cygwin-owner@sources.redhat.com
[ mailto:cygwin-owner@sources.redhat.com]On Behalf Of Chris Faylor
Sent: Saturday, September 16, 2000 7:12 PM
To: cygwin@sourceware.cygnus.com
Cc: edh@twcny.rr.com; a.eibach@gmx.net
Subject: Re: bash wrapping problem
On Sat, Sep 16, 2000 at 05:21:59PM +0200, Andreas Eibach wrote:
>----- Original Message -----
>From: "Ed Hourigan" <edh@twcny.rr.com>
>To: <cygwin@sourceware.cygnus.com>
>Sent: Saturday, September 16, 2000 8:08 PM
>Subject: bash wrapping problem
>
>
>> Hi - just upgraded to cygwin latest and greatest. I have a minor
>> (and annoying) issue. In bash, if I do an ls, the output all goes
>> on one line -- i.e no CR/LF. I have to enter the clear
>> command to fix the error. This only seems to happen if the directory
>> has "a lot" of files in it. My monitor is only 15 inches. Do I need to
>> configure bash for smaller screens?
>
>the same bug occurs if you TEMPORARILY quit cygwin bash to Win9X and
>relaunch it with the icon in the taskbar.
What does it mean to "TEMPORARILY quit" cygwin bash? Are you saying that
you minimize the window and then restore it by clicking on the icon?
Are you clicking on another window and then clicking on the icon to
gain focus in the cygwin bash window?
It would be instructive to see the output of "cygcheck -r -s -v" and
of "cygcheck ls". Apologies if you've already sent this but I suspect
that you haven't sent "cygcheck ls", at least.
cgf
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 7+ messages in thread* RE: bash wrapping problem
2000-09-16 16:12 ` Chris Faylor
2000-09-17 5:36 ` Ed Hourigan
@ 2000-09-17 6:05 ` Ed Hourigan
2000-09-18 6:47 ` Andreas Eibach
2 siblings, 0 replies; 7+ messages in thread
From: Ed Hourigan @ 2000-09-17 6:05 UTC (permalink / raw)
To: cygwin
>What does it mean to "TEMPORARILY quit" cygwin bash? Are you saying that
>you minimize the window and then restore it by clicking on the icon?
>Are you clicking on another window and then clicking on the icon to
>gain focus in the cygwin bash window?
Yes. You are not really quitting bash session, just minimizing it
to the task bar. Once you return to bash, the problem occurs.
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bash wrapping problem
2000-09-16 16:12 ` Chris Faylor
2000-09-17 5:36 ` Ed Hourigan
2000-09-17 6:05 ` Ed Hourigan
@ 2000-09-18 6:47 ` Andreas Eibach
2000-09-30 10:15 ` Chris Faylor
2 siblings, 1 reply; 7+ messages in thread
From: Andreas Eibach @ 2000-09-18 6:47 UTC (permalink / raw)
To: cygwin
> > What does it mean to "TEMPORARILY quit" cygwin bash? Are you saying
that
> you minimize the window and then restore it by clicking on the icon?
Yes!
Andreas
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bash wrapping problem
2000-09-18 6:47 ` Andreas Eibach
@ 2000-09-30 10:15 ` Chris Faylor
0 siblings, 0 replies; 7+ messages in thread
From: Chris Faylor @ 2000-09-30 10:15 UTC (permalink / raw)
To: cygwin
On Sun, Sep 17, 2000 at 08:27:44PM +0200, Andreas Eibach wrote:
>> > What does it mean to "TEMPORARILY quit" cygwin bash? Are you saying
>that
>> you minimize the window and then restore it by clicking on the icon?
>
>Yes!
I am unable to duplicate this problem. I've tried on several different
systems with no success. Sorry.
cgf
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2000-09-30 10:15 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-09-16 11:12 bash wrapping problem Ed Hourigan
2000-09-16 15:48 ` Andreas Eibach
2000-09-16 16:12 ` Chris Faylor
2000-09-17 5:36 ` Ed Hourigan
2000-09-17 6:05 ` Ed Hourigan
2000-09-18 6:47 ` Andreas Eibach
2000-09-30 10:15 ` Chris Faylor
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).