Re: where to set CYGWIN=tty

Re: where to set CYGWIN=tty

[Suhaib M. Siddiqi]

Cygwin=tty can be set in Cygnus.bat

For rxvt, check ftp://ftp.franken.de .  I am not sure if it is available
there or not.





----- Original Message -----
From: Murli Ganeshan <murlig@crystal.cirrus.com>
To: <cygwin@sourceware.cygnus.com>
Sent: Monday, February 08, 1999 3:04 PM
Subject: where to set CYGWIN=tty


>I have a couple of questions about cygwin B20.1
>
>1.
>I have recently upgraded to B20.1 and would like to know where to set
the CYGWIN
>env variable. When I ran check_cygwin_setup.sh script, it said that
this env
>variable could not be set inside bash. I have tried  adding "set
CYGWIN=tty" in
>my .bash_profile as well autoexec.bat and even after rebooting,
>echo $CYGWIN
>doesnt show anything. Can anyone tell me which is the best place to set
the
>CYGWIN env variable?
>
>2.
>I used to run rxvt in B20 by changing the cygnus.bat file and the rxvt
>executable I have seems to give errors under B20.1. I would appreciate
if anyone
>would let me know where to pick the latest rxvt executable.
>
>regards
>murli
>
>-------------------------------------------
>Murli Ganeshan Cirrus Logic, Austin, TX
> mailto:murlig@crystal.cirrus.com
>phone:  (512)912-3365 fax: (512)912-3230
>-------------------------------------------
>
>
>--
>Want to unsubscribe from this list?
>Send a message to cygwin-unsubscribe@sourceware.cygnus.com
>
>



--   
Want to unsubscribe from this list?                             
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

Re: where to set CYGWIN=tty

[Suhaib M. Siddiqi]

Cygwin=tty can be set in Cygnus.bat

For rxvt, check ftp://ftp.franken.de .  I am not sure if it is available
there or not.





----- Original Message -----
From: Murli Ganeshan <murlig@crystal.cirrus.com>
To: <cygwin@sourceware.cygnus.com>
Sent: Monday, February 08, 1999 3:04 PM
Subject: where to set CYGWIN=tty


>I have a couple of questions about cygwin B20.1
>
>1.
>I have recently upgraded to B20.1 and would like to know where to set
the CYGWIN
>env variable. When I ran check_cygwin_setup.sh script, it said that
this env
>variable could not be set inside bash. I have tried  adding "set
CYGWIN=tty" in
>my .bash_profile as well autoexec.bat and even after rebooting,
>echo $CYGWIN
>doesnt show anything. Can anyone tell me which is the best place to set
the
>CYGWIN env variable?
>
>2.
>I used to run rxvt in B20 by changing the cygnus.bat file and the rxvt
>executable I have seems to give errors under B20.1. I would appreciate
if anyone
>would let me know where to pick the latest rxvt executable.
>
>regards
>murli
>
>-------------------------------------------
>Murli Ganeshan Cirrus Logic, Austin, TX
> mailto:murlig@crystal.cirrus.com
>phone:  (512)912-3365 fax: (512)912-3230
>-------------------------------------------
>
>
>--
>Want to unsubscribe from this list?
>Send a message to cygwin-unsubscribe@sourceware.cygnus.com
>
>



--   
Want to unsubscribe from this list?                             
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

where to set CYGWIN=tty

[Jennifer Iyer]

In Cygnus.bat file.



Visit my homepage at http://www.prontomail.com/Prontomail/users/jennifer_iyer
______________________________________________________________
Get Your Free E-mail and Homepage at http://www.prontomail.com

--   
Want to unsubscribe from this list?                             
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

where to set CYGWIN=tty

[Jennifer Iyer]

In Cygnus.bat file.



Visit my homepage at http://www.prontomail.com/Prontomail/users/jennifer_iyer
______________________________________________________________
Get Your Free E-mail and Homepage at http://www.prontomail.com

--   
Want to unsubscribe from this list?                             
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

where to set CYGWIN=tty

[Murli Ganeshan]

I have a couple of questions about cygwin B20.1

1.
I have recently upgraded to B20.1 and would like to know where to set the CYGWIN 
env variable. When I ran check_cygwin_setup.sh script, it said that this env 
variable could not be set inside bash. I have tried  adding "set CYGWIN=tty" in 
my .bash_profile as well autoexec.bat and even after rebooting, 
echo $CYGWIN
doesnt show anything. Can anyone tell me which is the best place to set the 
CYGWIN env variable?

2. 
I used to run rxvt in B20 by changing the cygnus.bat file and the rxvt 
executable I have seems to give errors under B20.1. I would appreciate if anyone 
would let me know where to pick the latest rxvt executable.

regards
murli

-------------------------------------------
Murli Ganeshan 	Cirrus Logic, Austin, TX
mailto:murlig@crystal.cirrus.com	
phone:  (512)912-3365	fax: (512)912-3230
-------------------------------------------


--   
Want to unsubscribe from this list?                             
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

Re: where to set CYGWIN=tty

[Heinz-Jürgen Oertel]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1030 bytes --]

Murli Ganeshan schrieb:
> 
> I have a couple of questions about cygwin B20.1
> 
   .....
> 2.
> I used to run rxvt in B20 by changing the cygnus.bat file and the rxvt
> executable I have seems to give errors under B20.1. I would appreciate if anyone
> would let me know where to pick the latest rxvt executable.
> 
> regards
> murli
> 

I use the B19 rxvt, i think it is the last available one.
you must edit the file with a hex-editor. look for the cygwin-dll string
and replace the string with cygwin1.dll.
you must not change the file length, so fill the end with '\0'

-- 
with best regards / mit freundlichen Grüßen

  Heinz-Jürgen Oertel

==========================================
Heinz-Juergen Oertel
port GmbH            phone +49 3493 743-10
Antonienstr. 3       fax   +49 3493 743-15
D-06749 Bitterfeld   mailto:service@port.de
Germany              http://www.port.de
==========================================

--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

Re: where to set CYGWIN=tty

[Heinz-Jürgen Oertel]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1031 bytes --]

Murli Ganeshan schrieb:
> 
> I have a couple of questions about cygwin B20.1
> 
   .....
> 2.
> I used to run rxvt in B20 by changing the cygnus.bat file and the rxvt
> executable I have seems to give errors under B20.1. I would appreciate if anyone
> would let me know where to pick the latest rxvt executable.
> 
> regards
> murli
> 

I use the B19 rxvt, i think it is the last available one.
you must edit the file with a hex-editor. look for the cygwin-dll string
and replace the string with cygwin1.dll.
you must not change the file length, so fill the end with '\0'

-- 
with best regards / mit freundlichen Grüßen

  Heinz-Jürgen Oertel

==========================================
Heinz-Juergen Oertel
port GmbH            phone +49 3493 743-10
Antonienstr. 3       fax   +49 3493 743-15
D-06749 Bitterfeld   mailto:service@port.de
Germany              http://www.port.de
==========================================

--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

where to set CYGWIN=tty

[Murli Ganeshan]

I have a couple of questions about cygwin B20.1

1.
I have recently upgraded to B20.1 and would like to know where to set the CYGWIN 
env variable. When I ran check_cygwin_setup.sh script, it said that this env 
variable could not be set inside bash. I have tried  adding "set CYGWIN=tty" in 
my .bash_profile as well autoexec.bat and even after rebooting, 
echo $CYGWIN
doesnt show anything. Can anyone tell me which is the best place to set the 
CYGWIN env variable?

2. 
I used to run rxvt in B20 by changing the cygnus.bat file and the rxvt 
executable I have seems to give errors under B20.1. I would appreciate if anyone 
would let me know where to pick the latest rxvt executable.

regards
murli

-------------------------------------------
Murli Ganeshan 	Cirrus Logic, Austin, TX
mailto:murlig@crystal.cirrus.com	
phone:  (512)912-3365	fax: (512)912-3230
-------------------------------------------


--   
Want to unsubscribe from this list?                             
Send a message to cygwin-unsubscribe@sourceware.cygnus.com