exim and ntsec

exim and ntsec

[Corwin]

Hi all ..

Does anybody succeed in getting exim to work with ntsec on ??
It works perfectly without ntsec but nothing to do when ntsec is on, I =
got
permission problems on the /etc/local/exim/configure file.
The error message is "2002-07-02 15:04:55 Exim configuration file
/usr/local/exim/configure has the wrong owner, group, or mode"

I tried to change the owner to SYSTEM or an exim user as told in the =
README
file but no way .. I got always the same error ..

I am also unable to run it as a service even when ntsec is not set ..

Would be nice if somebody knows the answer ...

Thanx

Thomas

 
______________________________________________________________________________
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
http://www.ifrance.com/_reloc/email.emailif



--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: exim and ntsec

[Corwin]

I made a complete reinstallation of Cygwin on my machine and it works well
now ...
I really have no idea why it did not before !!!
Anyway, I think this was not an exim related problem, rather a problem in my
cygwin installation (it was an old installation I updated reguliarly through
the cygwin setup but I am not sure this way is the best to keep an up to
date consistent cygwin system ;o)

Thanks a lot for your help and for your work on exim and qpopper ;o)

Best regards

Thomas

----- Original Message -----
From: <phumblet@attbi.com>
To: "Corwin" <Cygwin@ifrance.com>
Cc: <pierre.humblet@ieee.org>
Sent: Tuesday, July 09, 2002 11:22 PM
Subject: Re: exim and ntsec


> Hi Thomas,
>
> tomorrow I should have access to a PC to investigate
> what´s going on. Could you send me the debug output
> when you run as a service without having "exim" in
> passwd?
> Do you use the latest official cygwin1.dll?
>
> What you sent me before is consistent with having an
> "exim" user but the setuid to that user failing (perhaps
> problem with passwd or group).
> If an "exim" user exists, then "configure" must be owned
> by it. I have no idea why you cannot change
> the "configure" group. I assume you are in the admins
> group on your own machine.
>
> Pierre
>
> > As everything I tried did not work I also tried effectivly to define the
> > exim user with no luck.
> > I deleted it but no change.
> > I enclosed my passwd file (but it's a very common one).
> >
> > Here at work, I am logged as a domain user (tlefeuvre in passwd file).
> >
> > Tell me if you see something strange but I don't think the problem comes
> > from here.
> >
> > Thanks
> >
> > Thomas
> >
> > PS: Now my configure file is owned by SYSTEM but I cannot change the
group
> > anymore (permission denied), do you know why ?? It used to work before
..
> >
> > ----- Original Message -----
> > From: <phumblet@attbi.com>
> > To: "Corwin" <Cygwin@ifrance.com>
> > Sent: Monday, July 08, 2002 4:44 PM
> > Subject: Re: exim and ntsec
> >
> >
> > > A more general question:
> > >
> > > could you send me your /etc/passwd and /etc/group files?
> > >
> > > Pierre
> > > > Thanks for your answer Pierre ..
> > > > Here is my exim.log when I try to run it from service.
> > >
> >
> --------------------------------------------------------------------------
> > --
> > > > -----------------------------------------------------------
> > > > CYGWIN = "ntsec". Root / mapped to F:\cygwin.
> > > > Starting uid 18 gid 18
> > > > root_uid 1001 exim_uid 1001 exim_gid 513
> > > > Exim version 4.04 uid=18 gid=18 pid=2508 L=834cd8 D=fff7577f
> > > > probably GDBM (native mode)
> > > > Exim has no root privilege: uid=18 gid=18 euid=18 egid=18
> > > > changed uid/gid: forcing real = effective
> > > >   uid=18 gid=18
> > > >   auxiliary group list: 0
> > > > LOG: MAIN PANIC DIE
> > > >   Exim configuration file /usr/local/exim/configure has the wrong
owner,
> > > > group, or mode
> > > > search_tidyup called
> > > > >>>>>>>>>>>>>>>>>> Exim pid=2508 terminating with rc=1
> > >>>>>>>>>>>>>>>>>>
> > >
> >
> --------------------------------------------------------------------------
> > --
> > > > -----------------------------------------------------------
> > > > I really don't understand, as you can see owner and group id are
SYSTEM.
> > > > Permissions on configure are as follow:
> > >
> >
> --------------------------------------------------------------------------
> > --
> > > > -----------------------------------------------------------
> > > > -rw-r--r--    1 18       18          21262 Jul  2 11:58 configure
> > >
> >
> --------------------------------------------------------------------------
> > --
> > > > -----------------------------------------------------------
> > > > Owned by SYSTEM, readable/writable by SYSTEM and readable only for
> > others.
> > > >
> > > > Here it is .. I'm looking further to check out what's wrong ... This
may
> > be
> > > > also a CYGWIN permission problem... (This is not the first  problem
I
> > have
> > > > when using ntsec with a domain user)
> > > >
> > > > Thanks again ..
> > > >
> > > > Thomas
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Pierre A. Humblet" <Pierre.Humblet@ieee.org>
> > > > To: <cygwin@cygwin.com>
> > > > Sent: Saturday, July 06, 2002 4:16 AM
> > > > Subject: Re: exim and ntsec
> > > >
> > > >
> > > > > "Corwin" <Cygwin at ifrance dot com> wrote
> > > > >
> > > > > >Forgive my lack of knowledge. I saw the Exim has no root
privilege
> > > > message
> > > > > >but what I can't explain (And I am sure you can) is why I got the
> > same
> > > > > >message when launching exim with ntsec disabled and why It is
working
> > > > well
> > > > > >then ...
> > > > >
> > > > > Thomas
> > > > >
> > > > > I don't see this message without ntsec! Running without ntsec is
all
> > > > > you need if you don't need to setuid to access directories and to
set
> > > > > permissions.
> > > > > To run under ntsec, start exim from cygrunsrv. It is coded to
> > recognize
> > > > > uid 18.
> > > > > If you have problems, add the arguments -c -d (in
ygrunsrv -I..  -a
> > > > "...")
> > > > > and look at the debug output in /var/log/exim.log, in addition to
the
> > > > > logfiles.
> > > > >
> > > > > I assume you fixed the permissions problems of configure (previous
> > > > messages).
> > > > > With ntsec it must be owned by SYSTEM and other users cannot have
> > write
> > > > > access.
> > > > >
> > > > > Pierre
> > > > >
> > > > > P.S.: Please cc me on this, I don't subscribe to the list.
> > > > >
> > > > > --
> > > > > Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> > > > > Bug reporting:         http://cygwin.com/bugs.html
> > > > > Documentation:         http://cygwin.com/docs.html
> > > > > FAQ:                   http://cygwin.com/faq/
> > > > >
> > > >
> > > >
> > > >
> >
____________________________________________________________________________
> > __
> > > > ifrance.com, l'email gratuit le plus complet de l'Internet !
> > > > vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
> > > > http://www.ifrance.com/_reloc/email.emailif
> > > >
> > > >

 
______________________________________________________________________________
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
http://www.ifrance.com/_reloc/email.emailif



--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: exim and ntsec

[Corwin]

[-- Attachment #1: Type: text/plain, Size: 4365 bytes --]

As everything I tried did not work I also tried effectivly to define the
exim user with no luck.
I deleted it but no change.
I enclosed my passwd file (but it's a very common one).

Here at work, I am logged as a domain user (tlefeuvre in passwd file).

Tell me if you see something strange but I don't think the problem comes
from here.

Thanks

Thomas

PS: Now my configure file is owned by SYSTEM but I cannot change the group
anymore (permission denied), do you know why ?? It used to work before ..

----- Original Message -----
From: <phumblet@attbi.com>
To: "Corwin" <Cygwin@ifrance.com>
Sent: Monday, July 08, 2002 4:44 PM
Subject: Re: exim and ntsec


> A more general question:
>
> could you send me your /etc/passwd and /etc/group files?
>
> Pierre
> > Thanks for your answer Pierre ..
> > Here is my exim.log when I try to run it from service.
>
> --------------------------------------------------------------------------
--
> > -----------------------------------------------------------
> > CYGWIN = "ntsec". Root / mapped to F:\cygwin.
> > Starting uid 18 gid 18
> > root_uid 1001 exim_uid 1001 exim_gid 513
> > Exim version 4.04 uid=18 gid=18 pid=2508 L=834cd8 D=fff7577f
> > probably GDBM (native mode)
> > Exim has no root privilege: uid=18 gid=18 euid=18 egid=18
> > changed uid/gid: forcing real = effective
> >   uid=18 gid=18
> >   auxiliary group list: 0
> > LOG: MAIN PANIC DIE
> >   Exim configuration file /usr/local/exim/configure has the wrong owner,
> > group, or mode
> > search_tidyup called
> > >>>>>>>>>>>>>>>>>> Exim pid=2508 terminating with rc=1
>>>>>>>>>>>>>>>>>>
>
> --------------------------------------------------------------------------
--
> > -----------------------------------------------------------
> > I really don't understand, as you can see owner and group id are SYSTEM.
> > Permissions on configure are as follow:
>
> --------------------------------------------------------------------------
--
> > -----------------------------------------------------------
> > -rw-r--r--    1 18       18          21262 Jul  2 11:58 configure
>
> --------------------------------------------------------------------------
--
> > -----------------------------------------------------------
> > Owned by SYSTEM, readable/writable by SYSTEM and readable only for
others.
> >
> > Here it is .. I'm looking further to check out what's wrong ... This may
be
> > also a CYGWIN permission problem... (This is not the first  problem I
have
> > when using ntsec with a domain user)
> >
> > Thanks again ..
> >
> > Thomas
> >
> >
> > ----- Original Message -----
> > From: "Pierre A. Humblet" <Pierre.Humblet@ieee.org>
> > To: <cygwin@cygwin.com>
> > Sent: Saturday, July 06, 2002 4:16 AM
> > Subject: Re: exim and ntsec
> >
> >
> > > "Corwin" <Cygwin at ifrance dot com> wrote
> > >
> > > >Forgive my lack of knowledge. I saw the Exim has no root privilege
> > message
> > > >but what I can't explain (And I am sure you can) is why I got the
same
> > > >message when launching exim with ntsec disabled and why It is working
> > well
> > > >then ...
> > >
> > > Thomas
> > >
> > > I don't see this message without ntsec! Running without ntsec is all
> > > you need if you don't need to setuid to access directories and to set
> > > permissions.
> > > To run under ntsec, start exim from cygrunsrv. It is coded to
recognize
> > > uid 18.
> > > If you have problems, add the arguments -c -d (in cygrunsrv -I..  -a
> > "...")
> > > and look at the debug output in /var/log/exim.log, in addition to the
> > > logfiles.
> > >
> > > I assume you fixed the permissions problems of configure (previous
> > messages).
> > > With ntsec it must be owned by SYSTEM and other users cannot have
write
> > > access.
> > >
> > > Pierre
> > >
> > > P.S.: Please cc me on this, I don't subscribe to the list.
> > >
> > > --
> > > Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> > > Bug reporting:         http://cygwin.com/bugs.html
> > > Documentation:         http://cygwin.com/docs.html
> > > FAQ:                   http://cygwin.com/faq/
> > >
> >
> >
> >
____________________________________________________________________________
__
> > ifrance.com, l'email gratuit le plus complet de l'Internet !
> > vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
> > http://www.ifrance.com/_reloc/email.emailif
> >
> >

[-- Attachment #2: passwd --]
[-- Type: application/octet-stream, Size: 519 bytes --]

Everyone:*:0:0:,S-1-1-0::
SYSTEM:*:18:18:,S-1-5-18::
Administrators:*:544:544:,S-1-5-32-544::
Administrator:unused_by_nt/2000/xp:500:513:U-LEFEUVREWK2\Administrator,S-1-5-21-1002003342-404370699-376655119-500:/home/Administrator:/bin/bash
Guest:unused_by_nt/2000/xp:501:513:U-LEFEUVREWK2\Guest,S-1-5-21-1002003342-404370699-376655119-501:/home/Guest:/bin/bash
TLEFEUVRE:unused_by_nt/2000/xp:11467:10513:Thomas Lefeuvre,U-GILSONFR\TLEFEUVRE,S-1-5-21-137782453-1448163031-619646970-1467:/home/tlefeuvre:/bin/bash


[-- Attachment #3: Type: text/plain, Size: 214 bytes --]

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: exim and ntsec

[Corwin]

Thanks for your answer Pierre ..
Here is my exim.log when I try to run it from service.
----------------------------------------------------------------------------
-----------------------------------------------------------
CYGWIN = "ntsec". Root / mapped to F:\cygwin.
Starting uid 18 gid 18
root_uid 1001 exim_uid 1001 exim_gid 513
Exim version 4.04 uid=18 gid=18 pid=2508 L=834cd8 D=fff7577f
probably GDBM (native mode)
Exim has no root privilege: uid=18 gid=18 euid=18 egid=18
changed uid/gid: forcing real = effective
  uid=18 gid=18
  auxiliary group list: 0
LOG: MAIN PANIC DIE
  Exim configuration file /usr/local/exim/configure has the wrong owner,
group, or mode
search_tidyup called
>>>>>>>>>>>>>>>>>> Exim pid=2508 terminating with rc=1 >>>>>>>>>>>>>>>>>>
----------------------------------------------------------------------------
-----------------------------------------------------------
I really don't understand, as you can see owner and group id are SYSTEM.
Permissions on configure are as follow:
----------------------------------------------------------------------------
-----------------------------------------------------------
-rw-r--r--    1 18       18          21262 Jul  2 11:58 configure
----------------------------------------------------------------------------
-----------------------------------------------------------
Owned by SYSTEM, readable/writable by SYSTEM and readable only for others.

Here it is .. I'm looking further to check out what's wrong ... This may be
also a CYGWIN permission problem... (This is not the first  problem I have
when using ntsec with a domain user)

Thanks again ..

Thomas


----- Original Message -----
From: "Pierre A. Humblet" <Pierre.Humblet@ieee.org>
To: <cygwin@cygwin.com>
Sent: Saturday, July 06, 2002 4:16 AM
Subject: Re: exim and ntsec


> "Corwin" <Cygwin at ifrance dot com> wrote
>
> >Forgive my lack of knowledge. I saw the Exim has no root privilege
message
> >but what I can't explain (And I am sure you can) is why I got the same
> >message when launching exim with ntsec disabled and why It is working
well
> >then ...
>
> Thomas
>
> I don't see this message without ntsec! Running without ntsec is all
> you need if you don't need to setuid to access directories and to set
> permissions.
> To run under ntsec, start exim from cygrunsrv. It is coded to recognize
> uid 18.
> If you have problems, add the arguments -c -d (in cygrunsrv -I..  -a
"...")
> and look at the debug output in /var/log/exim.log, in addition to the
> logfiles.
>
> I assume you fixed the permissions problems of configure (previous
messages).
> With ntsec it must be owned by SYSTEM and other users cannot have write
> access.
>
> Pierre
>
> P.S.: Please cc me on this, I don't subscribe to the list.
>
> --
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> Bug reporting:         http://cygwin.com/bugs.html
> Documentation:         http://cygwin.com/docs.html
> FAQ:                   http://cygwin.com/faq/
>

 
______________________________________________________________________________
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
http://www.ifrance.com/_reloc/email.emailif



--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: exim and ntsec

[Pierre A. Humblet]

"Corwin" <Cygwin at ifrance dot com> wrote

>Forgive my lack of knowledge. I saw the Exim has no root privilege message
>but what I can't explain (And I am sure you can) is why I got the same
>message when launching exim with ntsec disabled and why It is working well
>then ...

Thomas

I don't see this message without ntsec! Running without ntsec is all
you need if you don't need to setuid to access directories and to set
permissions.
To run under ntsec, start exim from cygrunsrv. It is coded to recognize 
uid 18.
If you have problems, add the arguments -c -d (in cygrunsrv -I..  -a "...")
and look at the debug output in /var/log/exim.log, in addition to the
logfiles.

I assume you fixed the permissions problems of configure (previous messages).
With ntsec it must be owned by SYSTEM and other users cannot have write
access.

Pierre

P.S.: Please cc me on this, I don't subscribe to the list.

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: exim and ntsec

[Corinna Vinschen]

On Fri, Jul 05, 2002 at 03:35:01PM +0200, Corwin wrote:
> Thanks Corinna,
> Forgive my lack of knowledge. I saw the Exim has no root privilege message
> but what I can't explain (And I am sure you can) is why I got the same
> message when launching exim with ntsec disabled and why It is working well
> then ...

No, I can't explain that w/o having seen the sources.

> Anyway, I will look into the source code ...

That's actually the best you can do.

Corinna

-- 
Corinna Vinschen                  Please, send mails regarding Cygwin to
Cygwin Developer                                mailto:cygwin@cygwin.com
Red Hat, Inc.

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: exim and ntsec

[Corwin]

Thanks Corinna,
Forgive my lack of knowledge. I saw the Exim has no root privilege message
but what I can't explain (And I am sure you can) is why I got the same
message when launching exim with ntsec disabled and why It is working well
then ...
Anyway, I will look into the source code ...

Thanks

Thomas


----- Original Message -----
From: "Corinna Vinschen" <corinna-cygwin@cygwin.com>
To: <cygwin@cygwin.com>
Sent: Friday, July 05, 2002 12:09 PM
Subject: Re: exim and ntsec


> On Fri, Jul 05, 2002 at 10:11:09AM +0200, Corwin wrote:
> > Still no luck ....
> > I tried several permission settings and owner but no way ...
> > With configure owned by SYSTEM with full rights exim -d gives me the
> > following:
> >
> > $exim -d
> > Exim version 4.04 uid=11467 gid=10513 pid=1668 L=834cd8 D=fff7577f
> > probably GDBM (native mode)
> > Exim has no root privilege: uid=11467 gid=10513 euid=11467 egid=10513
> > changed uid/gid: forcing real = effective
> >   uid=11467 gid=10513
> >   auxiliary group list: 0 11363 11428 10513 544 545
>
> It's easy to see from the above that exim has no root privileges
> (it tells you!).  Change the code in exim which checks for uid 0
> and let it check for uid 18.  Then start exim from cygrunsrv as
> described for sshd/cron/etc.  See /usr/doc/Cygwin.  Lots of docs.
>
> Corinna
>
> --
> Corinna Vinschen                  Please, send mails regarding Cygwin to
> Cygwin Developer                                mailto:cygwin@cygwin.com
> Red Hat, Inc.
>
> --
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> Bug reporting:         http://cygwin.com/bugs.html
> Documentation:         http://cygwin.com/docs.html
> FAQ:                   http://cygwin.com/faq/
>

 
______________________________________________________________________________
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
http://www.ifrance.com/_reloc/email.emailif



--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: exim and ntsec

[Corinna Vinschen]

On Fri, Jul 05, 2002 at 10:11:09AM +0200, Corwin wrote:
> Still no luck ....
> I tried several permission settings and owner but no way ...
> With configure owned by SYSTEM with full rights exim -d gives me the
> following:
> 
> $exim -d
> Exim version 4.04 uid=11467 gid=10513 pid=1668 L=834cd8 D=fff7577f
> probably GDBM (native mode)
> Exim has no root privilege: uid=11467 gid=10513 euid=11467 egid=10513
> changed uid/gid: forcing real = effective
>   uid=11467 gid=10513
>   auxiliary group list: 0 11363 11428 10513 544 545

It's easy to see from the above that exim has no root privileges
(it tells you!).  Change the code in exim which checks for uid 0
and let it check for uid 18.  Then start exim from cygrunsrv as
described for sshd/cron/etc.  See /usr/doc/Cygwin.  Lots of docs.

Corinna

-- 
Corinna Vinschen                  Please, send mails regarding Cygwin to
Cygwin Developer                                mailto:cygwin@cygwin.com
Red Hat, Inc.

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: exim and ntsec

[Corwin]

Still no luck ....
I tried several permission settings and owner but no way ...
With configure owned by SYSTEM with full rights exim -d gives me the
following:

$exim -d
Exim version 4.04 uid=11467 gid=10513 pid=1668 L=834cd8 D=fff7577f
probably GDBM (native mode)
Exim has no root privilege: uid=11467 gid=10513 euid=11467 egid=10513
changed uid/gid: forcing real = effective
  uid=11467 gid=10513
  auxiliary group list: 0 11363 11428 10513 544 545
LOG: MAIN PANIC DIE
  failed to open configuration file /usr/local/exim/configure
search_tidyup called
>>>>>>>>>>>>>>>>>> Exim pid=1668 terminating with rc=1 >>>>>>>>>>>>>>>>>>

and

$exim -bd -q15m
2002-07-05 10:04:56 failed to open configuration file
/usr/local/exim/configure

With configure still owned by SYSTEM but permission settings set to 744, I
got

$exim -d
Exim version 4.04 uid=11467 gid=10513 pid=2500 L=834cd8 D=fff7577f
probably GDBM (native mode)
Exim has no root privilege: uid=11467 gid=10513 euid=11467 egid=10513
changed uid/gid: forcing real = effective
  uid=11467 gid=10513
  auxiliary group list: 0 11363 11428 10513 544 545
Reset TZ to EST5EDT4,M4.1.0/2,M10.5.0/2: time is 2002-07-05 04:04:13
exim: debugging permission denied

and

$exim -bd -q15m
exim: permission denied

Does this help ? Any other suggestion ?

Thomas


----- Original Message -----
From: "Raphael" <raphael@oninet.pt>
To: "Corwin" <Cygwin@ifrance.com>
Sent: Wednesday, July 03, 2002 10:27 PM
Subject: Re: exim and ntsec


> On Wed, 3 Jul 2002, Corwin wrote:
>
> > I already tried to change the owner to SYSTEM but it does not work ..
> > Another idea ?
> >
> > > with CYGWIN=ntsec, chown SYSTEM /etc/local/exim/configure
> > >
>
> chmod 600?
>

 
______________________________________________________________________________
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
http://www.ifrance.com/_reloc/email.emailif



--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: exim and ntsec

[Corwin]

I already tried to change the owner to SYSTEM but it does not work ..
Another idea ?

----- Original Message -----
From: "Zubin Huang" <Zubin_Huang@cse.cuhk.edu.hk>
To: "Corwin" <Cygwin@ifrance.com>
Sent: Wednesday, July 03, 2002 2:13 PM
Subject: Re: exim and ntsec


> with CYGWIN=ntsec, chown SYSTEM /etc/local/exim/configure
>
>
>
> -Zubin Huang
>
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-
>  Computer Science & Engineering Dept.
>  The Chinese University of Hong Kong
>  Shatin, HONG KONG
>  Tel: +(852) 2609 8344
>  Email: zbhuang@cse.cuhk.edu.hk
> -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=--=-=-=-=-=-=-=-=-=-=-=-
>
>
> On Wed, 3 Jul 2002, Corwin wrote:
>
> > Date: Wed, 3 Jul 2002 09:24:37 +0200
> > From: Corwin <Cygwin@ifrance.com>
> > Newsgroups: gmane.os.cygwin
> > Subject: exim and ntsec
> >
> > Hi all ..
> >
> > Does anybody succeed in getting exim to work with ntsec on ??
> > It works perfectly without ntsec but nothing to do when ntsec is on, I =
> > got
> > permission problems on the /etc/local/exim/configure file.
> > The error message is "2002-07-02 15:04:55 Exim configuration file
> > /usr/local/exim/configure has the wrong owner, group, or mode"
> >
> > I tried to change the owner to SYSTEM or an exim user as told in the =
> > README
> > file but no way .. I got always the same error ..
> >
> > I am also unable to run it as a service even when ntsec is not set ..
> >
> > Would be nice if somebody knows the answer ...
> >
> > Thanx
> >
> > Thomas
> >
> >
> >
____________________________________________________________________________
__
> > ifrance.com, l'email gratuit le plus complet de l'Internet !
> > vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
> > http://www.ifrance.com/_reloc/email.emailif
> >
> >
> >
> > --
> > Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> > Bug reporting:         http://cygwin.com/bugs.html
> > Documentation:         http://cygwin.com/docs.html
> > FAQ:                   http://cygwin.com/faq/
> >
> >
> >
>

 
______________________________________________________________________________
ifrance.com, l'email gratuit le plus complet de l'Internet !
vos emails depuis un navigateur, en POP3, sur Minitel, sur le WAP...
http://www.ifrance.com/_reloc/email.emailif



--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/