* Re: g++ is not complete @ 1999-03-09 13:00 Suhaib M. Siddiqi 1999-03-31 19:45 ` Suhaib M. Siddiqi 0 siblings, 1 reply; 10+ messages in thread From: Suhaib M. Siddiqi @ 1999-03-09 13:00 UTC (permalink / raw) To: Chandra Kala Chavva, cygwin What do you expect? A full blown UNIX system runing on NT and available in a single download? Read the FAQ, check the software links at Cygnus site, all what you need is available from Cygwin contributors and links are clearly mentioned on their web pages. go to http://sourceware.cygnus.com/cygwin Regards Suhaib ----- Original Message ----- From: Chandra Kala Chavva <chandra@zsp.com> To: <cygwin@sourceware.cygnus.com> Sent: Tuesday, March 09, 1999 4:53 PM Subject: g++ is not complete >Hi, > >i installed lates cygnus tools and when i tried to compile C++ programs, i >am getting some header files not available error messages. The headers are > > pix.h > obstack.h > builtin.h > std.h > >I am used to vi editor and seems like vi is not available too. > >Please get back to me as soon as possible. > >Thanks >Chandra > > > >-- >Want to unsubscribe from this list? >Send a message to cygwin-unsubscribe@sourceware.cygnus.com > > -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: g++ is not complete 1999-03-09 13:00 g++ is not complete Suhaib M. Siddiqi @ 1999-03-31 19:45 ` Suhaib M. Siddiqi 0 siblings, 0 replies; 10+ messages in thread From: Suhaib M. Siddiqi @ 1999-03-31 19:45 UTC (permalink / raw) To: Chandra Kala Chavva, cygwin What do you expect? A full blown UNIX system runing on NT and available in a single download? Read the FAQ, check the software links at Cygnus site, all what you need is available from Cygwin contributors and links are clearly mentioned on their web pages. go to http://sourceware.cygnus.com/cygwin Regards Suhaib ----- Original Message ----- From: Chandra Kala Chavva <chandra@zsp.com> To: <cygwin@sourceware.cygnus.com> Sent: Tuesday, March 09, 1999 4:53 PM Subject: g++ is not complete >Hi, > >i installed lates cygnus tools and when i tried to compile C++ programs, i >am getting some header files not available error messages. The headers are > > pix.h > obstack.h > builtin.h > std.h > >I am used to vi editor and seems like vi is not available too. > >Please get back to me as soon as possible. > >Thanks >Chandra > > > >-- >Want to unsubscribe from this list? >Send a message to cygwin-unsubscribe@sourceware.cygnus.com > > -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: g++ is not complete @ 1999-03-09 13:26 Suhaib M. Siddiqi 1999-03-31 19:45 ` Suhaib M. Siddiqi 0 siblings, 1 reply; 10+ messages in thread From: Suhaib M. Siddiqi @ 1999-03-09 13:26 UTC (permalink / raw) To: Chandra Kala Chavva, cygwin > >i installed lates cygnus tools and when i tried to compile C++ programs, i >am getting some header files not available error messages. The headers are > > pix.h > obstack.h > builtin.h These 3 headers are not standard UNIX headers for C++, anyway. I assume your code must provide them. I could not find them on LINUX and SGI. May be I am mising something here? > std.h > >I am used to vi editor and seems like vi is not available too. > >Please get back to me as soon as possible. > >Thanks >Chandra > > > >-- >Want to unsubscribe from this list? >Send a message to cygwin-unsubscribe@sourceware.cygnus.com > > -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: g++ is not complete 1999-03-09 13:26 Suhaib M. Siddiqi @ 1999-03-31 19:45 ` Suhaib M. Siddiqi 0 siblings, 0 replies; 10+ messages in thread From: Suhaib M. Siddiqi @ 1999-03-31 19:45 UTC (permalink / raw) To: Chandra Kala Chavva, cygwin > >i installed lates cygnus tools and when i tried to compile C++ programs, i >am getting some header files not available error messages. The headers are > > pix.h > obstack.h > builtin.h These 3 headers are not standard UNIX headers for C++, anyway. I assume your code must provide them. I could not find them on LINUX and SGI. May be I am mising something here? > std.h > >I am used to vi editor and seems like vi is not available too. > >Please get back to me as soon as possible. > >Thanks >Chandra > > > >-- >Want to unsubscribe from this list? >Send a message to cygwin-unsubscribe@sourceware.cygnus.com > > -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* make problem in NT @ 1999-03-08 16:13 Chandra Kala Chavva [not found] ` < Pine.LNX.3.95.990308170914.4131A-100000@cheetah.zsp.com > 0 siblings, 1 reply; 10+ messages in thread From: Chandra Kala Chavva @ 1999-03-08 16:13 UTC (permalink / raw) To: cygwin Hi, I installed latest cygnus tools in Windows NT platform. I want to port my Linux tools to Windows NT platform and when i invoked the same Makefile (which works in Linux), i am getting the following error /c: Can't open /c make: *** [sub_dirs] Error 2 Can someone help me? Thankyou Chandra Hint: Is this releated to mount? -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: < Pine.LNX.3.95.990308170914.4131A-100000@cheetah.zsp.com >]
* g++ is not complete [not found] ` < Pine.LNX.3.95.990308170914.4131A-100000@cheetah.zsp.com > @ 1999-03-09 12:52 ` Chandra Kala Chavva [not found] ` < Pine.LNX.3.95.990309134603.6885A-100000@cheetah.zsp.com > 1999-03-31 19:45 ` Chandra Kala Chavva 0 siblings, 2 replies; 10+ messages in thread From: Chandra Kala Chavva @ 1999-03-09 12:52 UTC (permalink / raw) To: cygwin Hi, i installed lates cygnus tools and when i tried to compile C++ programs, i am getting some header files not available error messages. The headers are pix.h obstack.h builtin.h std.h I am used to vi editor and seems like vi is not available too. Please get back to me as soon as possible. Thanks Chandra -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: < Pine.LNX.3.95.990309134603.6885A-100000@cheetah.zsp.com >]
* Re: g++ is not complete [not found] ` < Pine.LNX.3.95.990309134603.6885A-100000@cheetah.zsp.com > @ 1999-03-09 14:11 ` Mumit Khan 1999-03-31 19:45 ` Mumit Khan 1999-03-09 14:47 ` Michael Hirmke 1 sibling, 1 reply; 10+ messages in thread From: Mumit Khan @ 1999-03-09 14:11 UTC (permalink / raw) To: Chandra Kala Chavva; +Cc: cygwin Chandra Kala Chavva <chandra@zsp.com> writes: > i installed lates cygnus tools and when i tried to compile C++ programs, i > am getting some header files not available error messages. The headers are > > pix.h > obstack.h > builtin.h > std.h > These have never been part of C++, but rather part of a 3rd party library (libg++). Libg++ is obsolete and users of this once quite useful library have been migrating their code for the past few years. Please get a recent book on C++ (Stroustrup 3rd Ed is quite well written), and, if you're serious about programming in C++, a copy of the standard as well from ANSI ($18 gets you a PDF version). Please send followup to gnu.g++.help. Regards, Mumit -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: g++ is not complete 1999-03-09 14:11 ` Mumit Khan @ 1999-03-31 19:45 ` Mumit Khan 0 siblings, 0 replies; 10+ messages in thread From: Mumit Khan @ 1999-03-31 19:45 UTC (permalink / raw) To: Chandra Kala Chavva; +Cc: cygwin Chandra Kala Chavva <chandra@zsp.com> writes: > i installed lates cygnus tools and when i tried to compile C++ programs, i > am getting some header files not available error messages. The headers are > > pix.h > obstack.h > builtin.h > std.h > These have never been part of C++, but rather part of a 3rd party library (libg++). Libg++ is obsolete and users of this once quite useful library have been migrating their code for the past few years. Please get a recent book on C++ (Stroustrup 3rd Ed is quite well written), and, if you're serious about programming in C++, a copy of the standard as well from ANSI ($18 gets you a PDF version). Please send followup to gnu.g++.help. Regards, Mumit -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: g++ is not complete [not found] ` < Pine.LNX.3.95.990309134603.6885A-100000@cheetah.zsp.com > 1999-03-09 14:11 ` Mumit Khan @ 1999-03-09 14:47 ` Michael Hirmke 1999-03-31 19:45 ` Michael Hirmke 1 sibling, 1 reply; 10+ messages in thread From: Michael Hirmke @ 1999-03-09 14:47 UTC (permalink / raw) To: cygwin Hi Chandra, [...] > >I am used to vi editor and seems like vi is not available too. Perhaps this helps a bit: ------------------------< snip snip snip >----------------------------- *vim-5.3* ------- - what is it? - Vim (Vi Improved) is an almost compatible version of the UNIX editor vi whereby almost every possible command can be performed using only ASCII characters. Only the 'Q' command is missing (you don't need it). Many new features have been added: multi level undo, command line history, filename completion, block operations, editing of binary data, etc. Vi is available for the AMIGA, MS-DOS, Windows NT, and various versions of UNIX. - system - Windows NT4 German / SP3 - Cygwin - for B20 - binary mounts only - CYGWIN=title strip_title binmode glob tty - preliminaries - you first have to install *ncurses-4.x*, if you want vim to run in another terminal mode than the builtin ones - you first have to install *X11R6.3*, if you want vim with X11 GUI support - get the source packages - vim-5.3-src.tar.gz (the source code) - vim-5.3-rt.tar.gz (the so called runtime system) somewhere from the net or your favourite Linux distribution - configure - works without changes with these parameters: ./configure \ --prefix=/usr/local \ --disable-perlinterp \ --disable-pythoninterp or for a vim without any GUI support ./configure \ --prefix=/usr/local \ --disable-perlinterp \ --disable-pythoninterp \ --disable-gui \ --without-x - make - works without changes - make install - you have to create a few directories first - no idea, why they are not created automatically !?!? - mkdir -p <prefix>/share/vim/doc - mkdir -p <prefix>/share/vim/syntax - mkdir -p <prefix>/share/vim/macros - export SUFFIX=.exe - now "make install" runs without further problems - you can use the following script for all the steps above: --------------------< snip snip snip >-------------------------- #!/bin/sh set -x pref=/usr/local mode=nogui case "$mode" in nogui) cfgopts=" \ --prefix=$pref \ --disable-cscope \ --disable-perlinterp \ --disable-pythoninterp \ --disable-tclinterp \ --disable-gui \ --without-x \ " ;; gui) cfgopts=" \ --prefix=$pref \ --disable-cscope \ --disable-perlinterp \ --disable-pythoninterp \ --disable-tclinterp \ " ;; esac ./configure $cfgopts && \ make && \ mkdir -p $pref/share/vim/doc && \ mkdir -p $pref/share/vim/syntax && \ mkdir -p $pref/share/vim/macros && \ export SUFFIX=.exe && \ make install --------------------< snip snip snip >-------------------------- - notes - if the X11R6.3 package is installed, you get GUI support, too; the process for building the package is the same, though - package availability - on ftp.franken.de - in /pub/win32/develop/gnuwin32/cygwin/porters/Hirmke_Michael/B20 - or vim-5.3-cygwin-b20-builtin-term-bin.tar.gz - or vim-5.3-cygwin-b20-builtin-term-bin.zip - or vim-5.3-cygwin-b20-without-gui-bin.tar.gz - or vim-5.3-cygwin-b20-without-gui-bin.zip (- or vim-5.3-cygwin-b20-with-gui-bin.tar.gz) (- or vim-5.3-cygwin-b20-with-gui-bin.zip) - contributed by - mh@mike.franken.de (Michael Hirmke) ------------------------< snip snip snip >----------------------------- > >Please get back to me as soon as possible. > >Thanks >Chandra Bye. Michael. -- Michael Hirmke | Telefon +49 (911) 557999 Georg-Strobel-Strasse 81 | FAX +49 (911) 557664 90489 Nuernberg | E-Mail mailto:mh@mike.franken.de | WWW http://aquarius.franken.de/ -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: g++ is not complete 1999-03-09 14:47 ` Michael Hirmke @ 1999-03-31 19:45 ` Michael Hirmke 0 siblings, 0 replies; 10+ messages in thread From: Michael Hirmke @ 1999-03-31 19:45 UTC (permalink / raw) To: cygwin Hi Chandra, [...] > >I am used to vi editor and seems like vi is not available too. Perhaps this helps a bit: ------------------------< snip snip snip >----------------------------- *vim-5.3* ------- - what is it? - Vim (Vi Improved) is an almost compatible version of the UNIX editor vi whereby almost every possible command can be performed using only ASCII characters. Only the 'Q' command is missing (you don't need it). Many new features have been added: multi level undo, command line history, filename completion, block operations, editing of binary data, etc. Vi is available for the AMIGA, MS-DOS, Windows NT, and various versions of UNIX. - system - Windows NT4 German / SP3 - Cygwin - for B20 - binary mounts only - CYGWIN=title strip_title binmode glob tty - preliminaries - you first have to install *ncurses-4.x*, if you want vim to run in another terminal mode than the builtin ones - you first have to install *X11R6.3*, if you want vim with X11 GUI support - get the source packages - vim-5.3-src.tar.gz (the source code) - vim-5.3-rt.tar.gz (the so called runtime system) somewhere from the net or your favourite Linux distribution - configure - works without changes with these parameters: ./configure \ --prefix=/usr/local \ --disable-perlinterp \ --disable-pythoninterp or for a vim without any GUI support ./configure \ --prefix=/usr/local \ --disable-perlinterp \ --disable-pythoninterp \ --disable-gui \ --without-x - make - works without changes - make install - you have to create a few directories first - no idea, why they are not created automatically !?!? - mkdir -p <prefix>/share/vim/doc - mkdir -p <prefix>/share/vim/syntax - mkdir -p <prefix>/share/vim/macros - export SUFFIX=.exe - now "make install" runs without further problems - you can use the following script for all the steps above: --------------------< snip snip snip >-------------------------- #!/bin/sh set -x pref=/usr/local mode=nogui case "$mode" in nogui) cfgopts=" \ --prefix=$pref \ --disable-cscope \ --disable-perlinterp \ --disable-pythoninterp \ --disable-tclinterp \ --disable-gui \ --without-x \ " ;; gui) cfgopts=" \ --prefix=$pref \ --disable-cscope \ --disable-perlinterp \ --disable-pythoninterp \ --disable-tclinterp \ " ;; esac ./configure $cfgopts && \ make && \ mkdir -p $pref/share/vim/doc && \ mkdir -p $pref/share/vim/syntax && \ mkdir -p $pref/share/vim/macros && \ export SUFFIX=.exe && \ make install --------------------< snip snip snip >-------------------------- - notes - if the X11R6.3 package is installed, you get GUI support, too; the process for building the package is the same, though - package availability - on ftp.franken.de - in /pub/win32/develop/gnuwin32/cygwin/porters/Hirmke_Michael/B20 - or vim-5.3-cygwin-b20-builtin-term-bin.tar.gz - or vim-5.3-cygwin-b20-builtin-term-bin.zip - or vim-5.3-cygwin-b20-without-gui-bin.tar.gz - or vim-5.3-cygwin-b20-without-gui-bin.zip (- or vim-5.3-cygwin-b20-with-gui-bin.tar.gz) (- or vim-5.3-cygwin-b20-with-gui-bin.zip) - contributed by - mh@mike.franken.de (Michael Hirmke) ------------------------< snip snip snip >----------------------------- > >Please get back to me as soon as possible. > >Thanks >Chandra Bye. Michael. -- Michael Hirmke | Telefon +49 (911) 557999 Georg-Strobel-Strasse 81 | FAX +49 (911) 557664 90489 Nuernberg | E-Mail mailto:mh@mike.franken.de | WWW http://aquarius.franken.de/ -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* g++ is not complete 1999-03-09 12:52 ` g++ is not complete Chandra Kala Chavva [not found] ` < Pine.LNX.3.95.990309134603.6885A-100000@cheetah.zsp.com > @ 1999-03-31 19:45 ` Chandra Kala Chavva 1 sibling, 0 replies; 10+ messages in thread From: Chandra Kala Chavva @ 1999-03-31 19:45 UTC (permalink / raw) To: cygwin Hi, i installed lates cygnus tools and when i tried to compile C++ programs, i am getting some header files not available error messages. The headers are pix.h obstack.h builtin.h std.h I am used to vi editor and seems like vi is not available too. Please get back to me as soon as possible. Thanks Chandra -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~1999-03-31 19:45 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 1999-03-09 13:00 g++ is not complete Suhaib M. Siddiqi 1999-03-31 19:45 ` Suhaib M. Siddiqi -- strict thread matches above, loose matches on Subject: below -- 1999-03-09 13:26 Suhaib M. Siddiqi 1999-03-31 19:45 ` Suhaib M. Siddiqi 1999-03-08 16:13 make problem in NT Chandra Kala Chavva [not found] ` < Pine.LNX.3.95.990308170914.4131A-100000@cheetah.zsp.com > 1999-03-09 12:52 ` g++ is not complete Chandra Kala Chavva [not found] ` < Pine.LNX.3.95.990309134603.6885A-100000@cheetah.zsp.com > 1999-03-09 14:11 ` Mumit Khan 1999-03-31 19:45 ` Mumit Khan 1999-03-09 14:47 ` Michael Hirmke 1999-03-31 19:45 ` Michael Hirmke 1999-03-31 19:45 ` Chandra Kala Chavva
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).