* B20.1: access violoation occurs under dos prompt, not cygwin terminal
@ 1999-06-07 14:13 Willem Atsma
1999-06-07 14:17 ` Suhaib M. Siddiqi
1999-06-30 22:10 ` Willem Atsma
0 siblings, 2 replies; 6+ messages in thread
From: Willem Atsma @ 1999-06-07 14:13 UTC (permalink / raw)
To: cygwin
Hi,
I do get the same access violation under cygwin too, sorry.
Willem
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: B20.1: access violoation occurs under dos prompt, not cygwin terminal
1999-06-07 14:13 B20.1: access violoation occurs under dos prompt, not cygwin terminal Willem Atsma
@ 1999-06-07 14:17 ` Suhaib M. Siddiqi
1999-06-30 22:10 ` Suhaib M. Siddiqi
1999-06-30 22:10 ` Willem Atsma
1 sibling, 1 reply; 6+ messages in thread
From: Suhaib M. Siddiqi @ 1999-06-07 14:17 UTC (permalink / raw)
To: Willem Atsma, cygwin
----
From: Willem Atsma <watsma@mech.ubc.ca>
To: <cygwin@sourceware.cygnus.com>
Sent: Monday, June 07, 1999 5:22 PM
Subject: B20.1: access violoation occurs under dos prompt, not cygwin terminal
> Hi,
>
> I do get the same access violation under cygwin too, sorry.
>
> Willem
>
You may consider debugging first using GDB.
-sms
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* B20.1: access violoation occurs under dos prompt, not cygwin terminal
1999-06-07 14:13 B20.1: access violoation occurs under dos prompt, not cygwin terminal Willem Atsma
1999-06-07 14:17 ` Suhaib M. Siddiqi
@ 1999-06-30 22:10 ` Willem Atsma
1 sibling, 0 replies; 6+ messages in thread
From: Willem Atsma @ 1999-06-30 22:10 UTC (permalink / raw)
To: cygwin
Hi,
I do get the same access violation under cygwin too, sorry.
Willem
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: B20.1: access violoation occurs under dos prompt, not cygwin terminal
1999-06-07 14:17 ` Suhaib M. Siddiqi
@ 1999-06-30 22:10 ` Suhaib M. Siddiqi
0 siblings, 0 replies; 6+ messages in thread
From: Suhaib M. Siddiqi @ 1999-06-30 22:10 UTC (permalink / raw)
To: Willem Atsma, cygwin
----
From: Willem Atsma <watsma@mech.ubc.ca>
To: <cygwin@sourceware.cygnus.com>
Sent: Monday, June 07, 1999 5:22 PM
Subject: B20.1: access violoation occurs under dos prompt, not cygwin terminal
> Hi,
>
> I do get the same access violation under cygwin too, sorry.
>
> Willem
>
You may consider debugging first using GDB.
-sms
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* B20.1: access violoation occurs under dos prompt, not cygwin terminal
1999-06-07 14:08 Willem Atsma
@ 1999-06-30 22:10 ` Willem Atsma
0 siblings, 0 replies; 6+ messages in thread
From: Willem Atsma @ 1999-06-30 22:10 UTC (permalink / raw)
To: cygwin
Hi,
I get an access violation when running a program I compiled in a dos
window. No problems are reported in the cygwin terminal or when
compiling on linux. How can I fix this?
Below are the core file and the cygcheck result (run from the dos
window).
---------------------- core ----------------------
[main] inet2lr 1000 (0) exception: trapped!
[main] inet2lr 1000 (0) exception: code 0xC0000005 at 0x61053590
[main] inet2lr 1000 (0) exception: ax 0xA0317C4 bx 0x28 cx 0x0 dx
0xA0317C4
[main] inet2lr 1000 (0) exception: si 0xA0317C4 di 0x28 bp 0x247FB04 sp
0x247FAFC
[main] inet2lr 1000 (0) exception: exception is: STATUS_ACCESS_VIOLATION
[main] inet2lr 1000 (0) stack: Stack trace:
[main] inet2lr 1000 (0) stack: frame 0: sp = 0x247F910, pc = 0x6100A2C3
[main] inet2lr 1000 (0) stack: frame 1: sp = 0x247F94C, pc = 0x77F96666
[main] inet2lr 1000 (0) stack: frame 2: sp = 0x247F970, pc = 0x77F8912B
[main] inet2lr 1000 (0) stack: frame 3: sp = 0x247F9FC, pc = 0x77F763BA
[main] inet2lr 1000 (0) stack: frame 4: sp = 0x247FB04, pc = 0x41136D
[main] inet2lr 1000 (0) stack: frame 5: sp = 0x247FB54, pc = 0x40FCCC
[main] inet2lr 1000 (0) stack: frame 6: sp = 0x247FB68, pc = 0x40DC8B
[main] inet2lr 1000 (0) stack: frame 7: sp = 0x247FB84, pc = 0x40EF80
[main] inet2lr 1000 (0) stack: frame 8: sp = 0x247FB98, pc = 0x4017DC
[main] inet2lr 1000 (0) stack: frame 9: sp = 0x247FBF8, pc = 0x405664
[main] inet2lr 1000 (0) stack: frame 10: sp = 0x247FF44, pc = 0x61004402
[main] inet2lr 1000 (0) stack: frame 11: sp = 0x247FF88, pc = 0x61004420
[main] inet2lr 1000 (0) stack: frame 12: sp = 0x247FF94, pc = 0x41E5C2
[main] inet2lr 1000 (0) stack: frame 13: sp = 0x247FFA4, pc = 0x40103A
[main] inet2lr 1000 (0) stack: frame 14: sp = 0x247FFC0, pc = 0x77F1BA06
[main] inet2lr 1000 (0) stack: frame 15: sp = 0x247FFF0, pc = 0x0
[main] inet2lr 1000 (0) stack: End of stack trace
-------------------------------- cygcheck ------------------------------
Cygnus Win95/NT Configuration Diagnostics
Current System Time: Mon Jun 07 14:11:27 1999
WinNT Ver 4.0 build 1381 Service Pack 5
Path: //C/WINNT/system32
//C/WINNT
//C/Program Files/AVTOOLKIT
/cygwin-b20/H-i586-cygwin32/bin
SysDir: C:\WINNT\System32
WinDir: C:\WINNT
!EXITCODE = `00000000'
!Z: = `Z:\proposal\c\inet_cg_2lr'
COMPUTERNAME = `TSUNAMI'
COMSPEC = `C:\WINNT\system32\cmd.exe'
HOMEDRIVE = `z:'
HOMEPATH = `\'
LOGONSERVER = `\\TSUNAMI'
NUMBER_OF_PROCESSORS = `1'
OS = `Windows_NT'
OS2LIBPATH = `C:\WINNT\system32\os2\dll;'
PATHEXT = `.COM;.EXE;.BAT;.CMD'
PROCESSOR_ARCHITECTURE = `x86'
PROCESSOR_IDENTIFIER = `x86 Family 6 Model 3 Stepping 4, GenuineIntel'
PROCESSOR_LEVEL = `6'
PROCESSOR_REVISION = `0304'
PROMPT = `$P$G'
SYSTEMDRIVE = `C:'
SYSTEMROOT = `C:\WINNT'
TEMP = `C:\TEMP'
TMP = `C:\TEMP'
USERDOMAIN = `TSUNAMI'
USERNAME = `watsma'
USERPROFILE = `C:\WINNT\Profiles\watsma'
WINDIR = `C:\WINNT'
TERM = `cygwin'
HKEY_CURRENT_USER\Software\Cygnus Solutions
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\00
(default) = `\\ncl\watsma'
unix = `/home/watsma'
fbinary = 0x00000001
fsilent = 0x00000000
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\01
(default) = `f:\cygnus'
unix = `/'
fbinary = 0x00000000
fsilent = 0x00000000
a:\ fd N/A N/A
c:\ hd NTFS 2000Mb 85% CP CS UN PA FC
d:\ cd N/A N/A
f:\ hd FAT 995Mb 15% CP UN
g:\ hd FAT 1121Mb 21% CP UN
y:\ net Samba 4063Mb 32% CP UN ncl_general
z:\ net Samba 4063Mb 32% CP UN watsma
f:\cygnus / native text!=binary
\\ncl\watsma /home/watsma native text=binary
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\bash.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\cat.exe
Not Found: cpp (good!)
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\find.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\gcc.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\gdb.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\ld.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\ls.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\make.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\sh.exe
371k 1998/12/01 f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\cygtcl80.dll
- os=4.0 img=1.0 sys=4.0
"cygtcl80.dll" v0.0 ts=1998/12/1 0:25
5k 1998/12/01
f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\cygtclpip80.dll - os=4.0
img=1.0 sys=4.0
10k 1998/12/01
f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\cygtclreg80.dll - os=4.0
img=1.0 sys=4.0
"cygtclreg80.dll" v0.0 ts=1998/12/1 0:25
600k 1998/12/01 f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\cygtk80.dll -
os=4.0 img=1.0 sys=4.0
"cygtk80.dll" v0.0 ts=1998/12/1 0:28
446k 1998/12/04 f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\cygwin1.dll -
os=4.0 img=1.0 sys=4.0
"cygwin1.dll" v0.0 ts=1998/12/3 20:39
Use -h to see help about each section
^ permalink raw reply [flat|nested] 6+ messages in thread
* B20.1: access violoation occurs under dos prompt, not cygwin terminal
@ 1999-06-07 14:08 Willem Atsma
1999-06-30 22:10 ` Willem Atsma
0 siblings, 1 reply; 6+ messages in thread
From: Willem Atsma @ 1999-06-07 14:08 UTC (permalink / raw)
To: cygwin
Hi,
I get an access violation when running a program I compiled in a dos
window. No problems are reported in the cygwin terminal or when
compiling on linux. How can I fix this?
Below are the core file and the cygcheck result (run from the dos
window).
---------------------- core ----------------------
[main] inet2lr 1000 (0) exception: trapped!
[main] inet2lr 1000 (0) exception: code 0xC0000005 at 0x61053590
[main] inet2lr 1000 (0) exception: ax 0xA0317C4 bx 0x28 cx 0x0 dx
0xA0317C4
[main] inet2lr 1000 (0) exception: si 0xA0317C4 di 0x28 bp 0x247FB04 sp
0x247FAFC
[main] inet2lr 1000 (0) exception: exception is: STATUS_ACCESS_VIOLATION
[main] inet2lr 1000 (0) stack: Stack trace:
[main] inet2lr 1000 (0) stack: frame 0: sp = 0x247F910, pc = 0x6100A2C3
[main] inet2lr 1000 (0) stack: frame 1: sp = 0x247F94C, pc = 0x77F96666
[main] inet2lr 1000 (0) stack: frame 2: sp = 0x247F970, pc = 0x77F8912B
[main] inet2lr 1000 (0) stack: frame 3: sp = 0x247F9FC, pc = 0x77F763BA
[main] inet2lr 1000 (0) stack: frame 4: sp = 0x247FB04, pc = 0x41136D
[main] inet2lr 1000 (0) stack: frame 5: sp = 0x247FB54, pc = 0x40FCCC
[main] inet2lr 1000 (0) stack: frame 6: sp = 0x247FB68, pc = 0x40DC8B
[main] inet2lr 1000 (0) stack: frame 7: sp = 0x247FB84, pc = 0x40EF80
[main] inet2lr 1000 (0) stack: frame 8: sp = 0x247FB98, pc = 0x4017DC
[main] inet2lr 1000 (0) stack: frame 9: sp = 0x247FBF8, pc = 0x405664
[main] inet2lr 1000 (0) stack: frame 10: sp = 0x247FF44, pc = 0x61004402
[main] inet2lr 1000 (0) stack: frame 11: sp = 0x247FF88, pc = 0x61004420
[main] inet2lr 1000 (0) stack: frame 12: sp = 0x247FF94, pc = 0x41E5C2
[main] inet2lr 1000 (0) stack: frame 13: sp = 0x247FFA4, pc = 0x40103A
[main] inet2lr 1000 (0) stack: frame 14: sp = 0x247FFC0, pc = 0x77F1BA06
[main] inet2lr 1000 (0) stack: frame 15: sp = 0x247FFF0, pc = 0x0
[main] inet2lr 1000 (0) stack: End of stack trace
-------------------------------- cygcheck ------------------------------
Cygnus Win95/NT Configuration Diagnostics
Current System Time: Mon Jun 07 14:11:27 1999
WinNT Ver 4.0 build 1381 Service Pack 5
Path: //C/WINNT/system32
//C/WINNT
//C/Program Files/AVTOOLKIT
/cygwin-b20/H-i586-cygwin32/bin
SysDir: C:\WINNT\System32
WinDir: C:\WINNT
!EXITCODE = `00000000'
!Z: = `Z:\proposal\c\inet_cg_2lr'
COMPUTERNAME = `TSUNAMI'
COMSPEC = `C:\WINNT\system32\cmd.exe'
HOMEDRIVE = `z:'
HOMEPATH = `\'
LOGONSERVER = `\\TSUNAMI'
NUMBER_OF_PROCESSORS = `1'
OS = `Windows_NT'
OS2LIBPATH = `C:\WINNT\system32\os2\dll;'
PATHEXT = `.COM;.EXE;.BAT;.CMD'
PROCESSOR_ARCHITECTURE = `x86'
PROCESSOR_IDENTIFIER = `x86 Family 6 Model 3 Stepping 4, GenuineIntel'
PROCESSOR_LEVEL = `6'
PROCESSOR_REVISION = `0304'
PROMPT = `$P$G'
SYSTEMDRIVE = `C:'
SYSTEMROOT = `C:\WINNT'
TEMP = `C:\TEMP'
TMP = `C:\TEMP'
USERDOMAIN = `TSUNAMI'
USERNAME = `watsma'
USERPROFILE = `C:\WINNT\Profiles\watsma'
WINDIR = `C:\WINNT'
TERM = `cygwin'
HKEY_CURRENT_USER\Software\Cygnus Solutions
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\00
(default) = `\\ncl\watsma'
unix = `/home/watsma'
fbinary = 0x00000001
fsilent = 0x00000000
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL
setup\b15.0\mounts\01
(default) = `f:\cygnus'
unix = `/'
fbinary = 0x00000000
fsilent = 0x00000000
a:\ fd N/A N/A
c:\ hd NTFS 2000Mb 85% CP CS UN PA FC
d:\ cd N/A N/A
f:\ hd FAT 995Mb 15% CP UN
g:\ hd FAT 1121Mb 21% CP UN
y:\ net Samba 4063Mb 32% CP UN ncl_general
z:\ net Samba 4063Mb 32% CP UN watsma
f:\cygnus / native text!=binary
\\ncl\watsma /home/watsma native text=binary
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\bash.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\cat.exe
Not Found: cpp (good!)
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\find.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\gcc.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\gdb.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\ld.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\ls.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\make.exe
Found: f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\sh.exe
371k 1998/12/01 f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\cygtcl80.dll
- os=4.0 img=1.0 sys=4.0
"cygtcl80.dll" v0.0 ts=1998/12/1 0:25
5k 1998/12/01
f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\cygtclpip80.dll - os=4.0
img=1.0 sys=4.0
10k 1998/12/01
f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\cygtclreg80.dll - os=4.0
img=1.0 sys=4.0
"cygtclreg80.dll" v0.0 ts=1998/12/1 0:25
600k 1998/12/01 f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\cygtk80.dll -
os=4.0 img=1.0 sys=4.0
"cygtk80.dll" v0.0 ts=1998/12/1 0:28
446k 1998/12/04 f:\cygnus\cygwin-b20\H-i586-cygwin32\bin\cygwin1.dll -
os=4.0 img=1.0 sys=4.0
"cygwin1.dll" v0.0 ts=1998/12/3 20:39
Use -h to see help about each section
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~1999-06-30 22:10 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1999-06-07 14:13 B20.1: access violoation occurs under dos prompt, not cygwin terminal Willem Atsma
1999-06-07 14:17 ` Suhaib M. Siddiqi
1999-06-30 22:10 ` Suhaib M. Siddiqi
1999-06-30 22:10 ` Willem Atsma
-- strict thread matches above, loose matches on Subject: below --
1999-06-07 14:08 Willem Atsma
1999-06-30 22:10 ` Willem Atsma
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).