public inbox for cygwin@cygwin.com
 help / color / mirror / Atom feed
* Re: RCS 5.7 (?)
       [not found] ` <005801c1b438$abcc8480$2801a8c0@dcuthbert2k>
@ 2002-02-12 18:53   ` Christopher Faylor
  2002-02-12 21:59     ` RCS 5.7 (?) + setup.exe advice Dylan Cuthbert
  0 siblings, 1 reply; 3+ messages in thread
From: Christopher Faylor @ 2002-02-12 18:53 UTC (permalink / raw)
  To: cygwin-patches; +Cc: cygwin

On Wed, Feb 13, 2002 at 11:46:43AM +0900, Dylan Cuthbert wrote:
>Weird - I notice that RCS 5.7 is in the setup package listing.  Is this
>really the case?

Of course.

>I have the full installation of cygwin 1.39 but the standard rcs
>command set (rcs/rdiff etc) doesn't seem to exist?

Cygwin 1.3.9 is the DLL version number.  It has no bearing on RCS.  If
you don't have RCS on your system, you need to run setup.exe again and
select it for installation.  It doesn't happen automatically.

I've redirected this query to cygwin@cygwin.com.  Please confine
responses to that mailing list.  This doesn't belong on cygwin-patches.

cgf

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: RCS 5.7 (?) + setup.exe advice
  2002-02-12 18:53   ` RCS 5.7 (?) Christopher Faylor
@ 2002-02-12 21:59     ` Dylan Cuthbert
  2002-02-13 14:16       ` Robert Collins
  0 siblings, 1 reply; 3+ messages in thread
From: Dylan Cuthbert @ 2002-02-12 21:59 UTC (permalink / raw)
  To: cygwin

Ah, I get it now, I had a full installation of an older version of cygwin
and of course when I ran the setup program to update it doesn't
automatically tell you about new packages, one of which was rcs.  It isn't
obvious to the average user (ie. me) to have to step through the rather
large package list looking for "skip"s to click through to install - I had
already done that once and that was one time too many.  Hence the
confusion...

A "show new packages" and a "show un-installed packages" addition to
setup.exe might be a good (and simple/ie. easy to program) addition to the
user-interface and probably solve the flurry of this kind of e-mail that
gets sent every day. If I had enough time I'd do it however I just don't
unfortunately so all I can do is lay my hope in some kind soul out there...

Regards
---------------------------------
Q-Games, Dylan Cuthbert.
http://www.q-games.com/personal/utils

----- Original Message -----
From: "Christopher Faylor" <cgf@redhat.com>
To: <cygwin-patches@cygwin.com>
Cc: <cygwin@cygwin.com>
Sent: Wednesday, February 13, 2002 11:52 AM
Subject: Re: RCS 5.7 (?)


> On Wed, Feb 13, 2002 at 11:46:43AM +0900, Dylan Cuthbert wrote:
> >Weird - I notice that RCS 5.7 is in the setup package listing.  Is this
> >really the case?
>
> Of course.
>
> >I have the full installation of cygwin 1.39 but the standard rcs
> >command set (rcs/rdiff etc) doesn't seem to exist?
>
> Cygwin 1.3.9 is the DLL version number.  It has no bearing on RCS.  If
> you don't have RCS on your system, you need to run setup.exe again and
> select it for installation.  It doesn't happen automatically.
>
> I've redirected this query to cygwin@cygwin.com.  Please confine
> responses to that mailing list.  This doesn't belong on cygwin-patches.
>
> cgf
>
> --
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> Bug reporting:         http://cygwin.com/bugs.html
> Documentation:         http://cygwin.com/docs.html
> FAQ:                   http://cygwin.com/faq/
>


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: RCS 5.7 (?) + setup.exe advice
  2002-02-12 21:59     ` RCS 5.7 (?) + setup.exe advice Dylan Cuthbert
@ 2002-02-13 14:16       ` Robert Collins
  0 siblings, 0 replies; 3+ messages in thread
From: Robert Collins @ 2002-02-13 14:16 UTC (permalink / raw)
  To: Dylan Cuthbert, cygwin


===
----- Original Message -----
From: "Dylan Cuthbert" <dylan@q-games.com>
To: <cygwin@cygwin.com>
Sent: Wednesday, February 13, 2002 5:00 PM
Subject: Re: RCS 5.7 (?) + setup.exe advice


> Ah, I get it now, I had a full installation of an older version of
cygwin
> and of course when I ran the setup program to update it doesn't
> automatically tell you about new packages, one of which was rcs.  It
isn't
> obvious to the average user (ie. me) to have to step through the
rather
> large package list looking for "skip"s to click through to install - I
had
> already done that once and that was one time too many.  Hence the
> confusion...
>
> A "show new packages" and a "show un-installed packages" addition to
> setup.exe might be a good (and simple/ie. easy to program) addition to
the
> user-interface and probably solve the flurry of this kind of e-mail
that
> gets sent every day. If I had enough time I'd do it however I just
don't
> unfortunately so all I can do is lay my hope in some kind soul out
there...

Sure. Feel free to code them, both (IIRC) are already in the wishlist.

Rob


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2002-02-13 22:16 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <004601c1b437$4c883380$2801a8c0@dcuthbert2k>
     [not found] ` <005801c1b438$abcc8480$2801a8c0@dcuthbert2k>
2002-02-12 18:53   ` RCS 5.7 (?) Christopher Faylor
2002-02-12 21:59     ` RCS 5.7 (?) + setup.exe advice Dylan Cuthbert
2002-02-13 14:16       ` Robert Collins

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).