building a cross-compiler for Linux/OSX

building a cross-compiler for Linux/OSX

[Fabiano Sidler]

Hi folks!

I'm trying to build a cross-compiler under Linux and MacOSX using this
script: http://sourceware.org/ml/cygwin/2010-08/txt00010.txt
I get the same error on Linux and MacOSX after the make of line 340:
=== snip ===
[...]
i686-pc-cygwin-c++ -L/opt/devel/cygwin/build/cygwin/i686-pc-cygwin/winsup -L/opt
/devel/cygwin/build/cygwin/i686-pc-cygwin/winsup/cygwin -L/opt/devel/cygwin/buil
d/cygwin/i686-pc-cygwin/winsup/w32api/lib -isystem /opt/devel/cygwin/src/cygwin-
1.7.6-1/winsup/include -isystem /opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/cygw
in/include -isystem /opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/w32api/include -
B/opt/devel/cygwin/build/cygwin/i686-pc-cygwin/newlib/ -isystem /opt/devel/cygwi
n/build/cygwin/i686-pc-cygwin/newlib/targ-include -isystem /opt/devel/cygwin/src
/cygwin-1.7.6-1/newlib/libc/include    -c -nostdinc++  -DHAVE_CONFIG_H  -g -O2 -
Wno-error -MMD -fomit-frame-pointer -Werror -fmerge-constants -ftracer -mno-use-
libstdc-wrappers  -Wall -Wstrict-aliasing -Wwrite-strings -fno-common -pipe -fbu
iltin -fmessage-length=0  -I.  -I/opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/cyg
win  -I/opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/w32api/include -I/opt/devel/c
ygwin/src/cygwin-1.7.6-1/winsup/cygwin/config/i386 -I/opt/devel/cygwin/lib/gcc/i
686-pc-cygwin/4.5.0/include -fno-rtti -fno-exceptions -o ./fhandler_floppy.o /op
t/devel/cygwin/src/cygwin-1.7.6-1/winsup/cygwin/fhandler_floppy.cc
cc1plus: warnings being treated as errors
/opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/cygwin/fhandler_floppy.cc: In member
 function ?int fhandler_dev_floppy::get_drive_info(hd_geometry*)?:
/opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/cygwin/fhandler_floppy.cc:59:37: err
or: dereferencing type-punned pointer will break strict-aliasing rules
make[3]: *** [fhandler_floppy.o] Error 1
make[3]: Leaving directory `/opt/devel/cygwin/build/cygwin/i686-pc-cygwin/winsup
/cygwin'
make[2]: *** [cygwin] Error 1
make[2]: Leaving directory `/opt/devel/cygwin/build/cygwin/i686-pc-cygwin/winsup
'
make[1]: *** [all-target-winsup] Error 2
make[1]: Leaving directory `/opt/devel/cygwin/build/cygwin'
make: *** [all] Error 2
=== snap ===

Anyone able to run the script to completion or a different (and working) way
to build a cross-compiler for cygwin on Linux and OSX?

Greetings,
F. Sidler

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: building a cross-compiler for Linux/OSX

[Fabiano Sidler]

Hello? Noone building cross-compilers for cygwin?

Thus spake Fabiano Sidler, 11/02/07 10:50:
> Hi folks!
> 
> I'm trying to build a cross-compiler under Linux and MacOSX using this
> script: http://sourceware.org/ml/cygwin/2010-08/txt00010.txt
> I get the same error on Linux and MacOSX after the make of line 340:
> === snip ===
> [...]
> i686-pc-cygwin-c++ -L/opt/devel/cygwin/build/cygwin/i686-pc-cygwin/winsup -L/opt
> /devel/cygwin/build/cygwin/i686-pc-cygwin/winsup/cygwin -L/opt/devel/cygwin/buil
> d/cygwin/i686-pc-cygwin/winsup/w32api/lib -isystem /opt/devel/cygwin/src/cygwin-
> 1.7.6-1/winsup/include -isystem /opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/cygw
> in/include -isystem /opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/w32api/include -
> B/opt/devel/cygwin/build/cygwin/i686-pc-cygwin/newlib/ -isystem /opt/devel/cygwi
> n/build/cygwin/i686-pc-cygwin/newlib/targ-include -isystem /opt/devel/cygwin/src
> /cygwin-1.7.6-1/newlib/libc/include    -c -nostdinc++  -DHAVE_CONFIG_H  -g -O2 -
> Wno-error -MMD -fomit-frame-pointer -Werror -fmerge-constants -ftracer -mno-use-
> libstdc-wrappers  -Wall -Wstrict-aliasing -Wwrite-strings -fno-common -pipe -fbu
> iltin -fmessage-length=0  -I.  -I/opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/cyg
> win  -I/opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/w32api/include -I/opt/devel/c
> ygwin/src/cygwin-1.7.6-1/winsup/cygwin/config/i386 -I/opt/devel/cygwin/lib/gcc/i
> 686-pc-cygwin/4.5.0/include -fno-rtti -fno-exceptions -o ./fhandler_floppy.o /op
> t/devel/cygwin/src/cygwin-1.7.6-1/winsup/cygwin/fhandler_floppy.cc
> cc1plus: warnings being treated as errors
> /opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/cygwin/fhandler_floppy.cc: In member
>  function ?int fhandler_dev_floppy::get_drive_info(hd_geometry*)?:
> /opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/cygwin/fhandler_floppy.cc:59:37: err
> or: dereferencing type-punned pointer will break strict-aliasing rules
> make[3]: *** [fhandler_floppy.o] Error 1
> make[3]: Leaving directory `/opt/devel/cygwin/build/cygwin/i686-pc-cygwin/winsup
> /cygwin'
> make[2]: *** [cygwin] Error 1
> make[2]: Leaving directory `/opt/devel/cygwin/build/cygwin/i686-pc-cygwin/winsup
> '
> make[1]: *** [all-target-winsup] Error 2
> make[1]: Leaving directory `/opt/devel/cygwin/build/cygwin'
> make: *** [all] Error 2
> === snap ===
> 
> Anyone able to run the script to completion or a different (and working) way
> to build a cross-compiler for cygwin on Linux and OSX?
> 
> Greetings,
> F. Sidler

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: building a cross-compiler for Linux/OSX

[Peter John Acklam]

[-- Attachment #1: Type: text/plain, Size: 332 bytes --]

Fabiano Sidler [fabianosidler@swissonline.ch]:

> Hello? Noone building cross-compilers for cygwin?

I tried several times building a cross-compiler for sparc Solaris. I tried using the headers for Solaris 8, 9, and 10, but I never succeeded. I was able to build binutils, though, but not gcc. I have never tried Linux/OSX.

Peter


[-- Attachment #2: Type: text/plain, Size: 218 bytes --]

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: building a cross-compiler for Linux/OSX

[Yaakov (Cygwin/X)]

On Mon, 2011-02-07 at 10:50 +0100, Fabiano Sidler wrote:
> I'm trying to build a cross-compiler under Linux and MacOSX using this
> script: http://sourceware.org/ml/cygwin/2010-08/txt00010.txt
> I get the same error on Linux and MacOSX after the make of line 340:

Cygwin normally builds with -Werror but there are a few warnings
generated by GCC 4.5 which haven't been fixed yet in the code.  Remove
-Werror from $top_builddir/i686-pc-cygwin/winsup/cygwin/Makefile and the
rest of the build should precede without any further difficulties.


Yaakov
Cygwin Ports



--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: building a cross-compiler for Linux/OSX

[Yaakov (Cygwin/X)]

On Thu, 2011-02-10 at 10:26 +0100, Peter John Acklam wrote:
> Fabiano Sidler [fabianosidler@swissonline.ch]:
> 
> > Hello? Noone building cross-compilers for cygwin?
> 
> I tried several times building a cross-compiler for sparc Solaris. I tried 
> using the headers for Solaris 8, 9, and 10, but I never succeeded. I was 
> able to build binutils, though, but not gcc. I have never tried Linux/OSX.

IIUC the OP is trying to build a linux-to-cygwin cross-compiler.  It
sounds like you're trying to build a cygwin-to-solaris cross-compiler,
and there is such a toolchain available in Ports:

http://cygwin-ports.git.sourceforge.net/git/gitweb.cgi?p=cygwin-ports/solaris10-sparc-binutils
http://cygwin-ports.git.sourceforge.net/git/gitweb.cgi?p=cygwin-ports/solaris10-sparc-gcc
http://cygwin-ports.git.sourceforge.net/git/gitweb.cgi?p=cygwin-ports/solaris10-x86-binutils
http://cygwin-ports.git.sourceforge.net/git/gitweb.cgi?p=cygwin-ports/solaris10-x86-gcc

The GCC .cygport files explain how to get the necessary libc/libm
headers and libraries off of a Solaris system and where to place them on
the Cygwin system.


Yaakov
Cygwin Ports



--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: building a cross-compiler for Linux/OSX

[Fabiano Sidler]

[-- Attachment #1: Type: text/plain, Size: 1741 bytes --]

Sorry for replying so late.

Thus spoke Yaakov (Cygwin/X):
> On Mon, 2011-02-07 at 10:50 +0100, Fabiano Sidler wrote:
> > I'm trying to build a cross-compiler under Linux and MacOSX using this
> > script: http://sourceware.org/ml/cygwin/2010-08/txt00010.txt
> > I get the same error on Linux and MacOSX after the make of line 340:
> 
> Cygwin normally builds with -Werror but there are a few warnings
> generated by GCC 4.5 which haven't been fixed yet in the code.  Remove
> -Werror from $top_builddir/i686-pc-cygwin/winsup/cygwin/Makefile and the
> rest of the build should precede without any further difficulties.

Not without any further difficulties, but at least with a different error:

=== snip ===
[...]
/opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/utils/mingw i686-pc-cygwin-gcc -c -D
__CRTDLL__ -U__MSVCRT__ -g -O2 -Wno-error -I/opt/devel/cygwin/src/cygwin-1.7.6-1
/winsup/mingw/include -I/opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/mingw/../inc
lude -nostdinc -iwithprefixbefore include -I /opt/devel/cygwin/src/cygwin-1.7.6-
1/winsup/mingw/../w32api/include /opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/min
gw/crt1.c -o crt1.o
/opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/utils/mingw: couldn't find i686-pc-m
ingw32 directory
make[3]: *** [crt1.o] Error 1
make[3]: Leaving directory `/opt/devel/cygwin/build/cygwin/i686-pc-cygwin/winsup
/mingw'
make[2]: *** [mingw] Error 1
make[2]: Leaving directory `/opt/devel/cygwin/build/cygwin/i686-pc-cygwin/winsup
'
make[1]: *** [all-target-winsup] Error 2
make[1]: Leaving directory `/opt/devel/cygwin/build/cygwin'
make: *** [all] Error 2
=== snap ===

Again, the same error on Linux and OSX.

Thank you for helping, btw! ;)

Greetings,
Fabiano

[-- Attachment #2: Type: application/pgp-signature, Size: 195 bytes --]

Re: building a cross-compiler for Linux/OSX

[Yaakov (Cygwin/X)]

On Mon, 2011-02-14 at 22:01 +0100, Fabiano Sidler wrote:
> Not without any further difficulties, but at least with a different error:
> 
> /opt/devel/cygwin/src/cygwin-1.7.6-1/winsup/utils/mingw: couldn't find i686-pc-m
> ingw32 directory
> make[3]: *** [crt1.o] Error 1

You need to have mingw.org runtime and w32api files installed, such as
Fedora Linux's mingw32-runtime and mingw32-w32api packages.  Otherwise,
unpack the binary packages found here into your system root:

http://cygutils.fruitbat.org/ITP/mingw-gcc/release/mingw/mingw-runtime/
http://cygutils.fruitbat.org/ITP/mingw-gcc/release/mingw/mingw-w32api/

HTH,


Yaakov



--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: building a cross-compiler for Linux/OSX

[Yaakov (Cygwin/X)]

On Mon, 2011-02-14 at 22:01 +0100, Fabiano Sidler wrote:
> Not without any further difficulties, but at least with a different error:
> === snip ===
> Again, the same error on Linux and OSX.

Depending on your distro, this might make things a bit easier:

http://cygwinports.blogspot.com/2011/02/across-and-back-again.html

As for OSX, you'll need the patches from git, but the directions from
the .spec files will likely need some adjustments.

HTH,


Yaakov
Cygwin Ports



--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple