Re: bash, tcsh and perl

Re: bash, tcsh and perl

[Corinna Vinschen]

Douglass Turner wrote:
> 
> Hello Corinna,
> Can you please tell where you got your copy of tsch for Win95/NT?
> I've looked all over the web but have had no luck.
> 
> Cheers,
> Douglass Turner

Look at:

ftp://ftp.franken.de/pub/win32/develop/gnuwin32/cygwin32/porters/Vinschen_Corinna/B20

Files:
	tcsh-6.08.00.x.README
	tcsh-6.08.00.x.tar.gz

Regards,
Corinna

-
For help on using this list (especially unsubscribing), send a message to
"gnu-win32-request@cygnus.com" with one line of text: "help".

Re: bash, tcsh and perl

[Igor Schein]

On Wed, Jan 20, 1999 at 09:04:16PM +0100, Corinna Vinschen wrote:
> Douglass Turner wrote:
> > 
> > Hello Corinna,
> > Can you please tell where you got your copy of tsch for Win95/NT?
> > I've looked all over the web but have had no luck.
> > 
> > Cheers,
> > Douglass Turner
> 
> Look at:
> 
> ftp://ftp.franken.de/pub/win32/develop/gnuwin32/cygwin32/porters/Vinschen_Corinna/B20
> 
> Files:
> 	tcsh-6.08.00.x.README
> 	tcsh-6.08.00.x.tar.gz
> 
> Regards,
> Corinna


Hi,

I'm using tcsh in MSDOS console, and the arrows don't work - I have to
use emacs control sequences.  How can I enable arrows?

Thanks
Igor

Re: bash, tcsh and perl

[Corinna Vinschen]

Igor Schein wrote:
> Hi,
> 
> I'm using tcsh in MSDOS console, and the arrows don't work - I have to
> use emacs control sequences.  How can I enable arrows?
> 
> Thanks
> Igor

Do you have a /etc/termcap for termcap version of tcsh or do
you have terminfo files for curses version of tcsh?
Which setting has $TERM? Does it reference an existing
entry from termcap/terminfo? TERM=linux should always work.

Regards,
Corinna

Re: bash, tcsh and perl

[Corinna Vinschen]

Igor Schein wrote:
> Hi,
> 
> I'm using tcsh in MSDOS console, and the arrows don't work - I have to
> use emacs control sequences.  How can I enable arrows?
> 
> Thanks
> Igor

Do you have a /etc/termcap for termcap version of tcsh or do
you have terminfo files for curses version of tcsh?
Which setting has $TERM? Does it reference an existing
entry from termcap/terminfo? TERM=linux should always work.

Regards,
Corinna

Re: bash, tcsh and perl

[Igor Schein]

On Wed, Jan 20, 1999 at 09:04:16PM +0100, Corinna Vinschen wrote:
> Douglass Turner wrote:
> > 
> > Hello Corinna,
> > Can you please tell where you got your copy of tsch for Win95/NT?
> > I've looked all over the web but have had no luck.
> > 
> > Cheers,
> > Douglass Turner
> 
> Look at:
> 
> ftp://ftp.franken.de/pub/win32/develop/gnuwin32/cygwin32/porters/Vinschen_Corinna/B20
> 
> Files:
> 	tcsh-6.08.00.x.README
> 	tcsh-6.08.00.x.tar.gz
> 
> Regards,
> Corinna


Hi,

I'm using tcsh in MSDOS console, and the arrows don't work - I have to
use emacs control sequences.  How can I enable arrows?

Thanks
Igor

Re: bash, tcsh and perl

[Christopher Murray]

At 11:51 AM 2/3/1999 -0500, you wrote:
>On Wed, Jan 20, 1999 at 09:04:16PM +0100, Corinna Vinschen wrote:
>> Douglass Turner wrote:
>> > 
>> > Hello Corinna,
>> > Can you please tell where you got your copy of tsch for Win95/NT?
>> > I've looked all over the web but have had no luck.
>> > 
>> > Cheers,
>> > Douglass Turner
>> 
>> Look at:
>> 
>>
ftp://ftp.franken.de/pub/win32/develop/gnuwin32/cygwin32/porters/Vinschen_Co
rinna/B20
>> 
>> Files:
>> 	tcsh-6.08.00.x.README
>> 	tcsh-6.08.00.x.tar.gz
>> 
>> Regards,
>> Corinna
>
>
>Hi,
>
>I'm using tcsh in MSDOS console, and the arrows don't work - I have to
>use emacs control sequences.  How can I enable arrows?
>
Are you using a .tcshrc file?  In a tcshrc file that I picked up somewhere,
it had these bindings defined - I had to comment them out to get things
to work correctly.  Even if this not your specific problem, at the very
least, at least this is telling you to give a look at the bindkey
definitions - you may need to either change them or actually define some.

# NT specific bindkey extensions
#       bindkey -b N-up up-history
#       bindkey -b N-down down-history

***************************************************************************
Christopher Murray			Applied Research Laboratory
Assistant Research Engineer		The Pennsylvania State University
Work Phone:  (814) 865-2016		P.O. Box 30
Home Phone: (814) 231-2125		State College, PA 16804
Work Fax: (814) 863-1479 		Email: cjm18@psu.edu
v1.2a r+d>s TW 1/0/pw tG 12? 0 Animals 3 2 57.5% <16dec98>
***************************************************************************


--   
Want to unsubscribe from this list?                             
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

Re: bash, tcsh and perl

[Christopher Murray]

At 11:51 AM 2/3/1999 -0500, you wrote:
>On Wed, Jan 20, 1999 at 09:04:16PM +0100, Corinna Vinschen wrote:
>> Douglass Turner wrote:
>> > 
>> > Hello Corinna,
>> > Can you please tell where you got your copy of tsch for Win95/NT?
>> > I've looked all over the web but have had no luck.
>> > 
>> > Cheers,
>> > Douglass Turner
>> 
>> Look at:
>> 
>>
ftp://ftp.franken.de/pub/win32/develop/gnuwin32/cygwin32/porters/Vinschen_Co
rinna/B20
>> 
>> Files:
>> 	tcsh-6.08.00.x.README
>> 	tcsh-6.08.00.x.tar.gz
>> 
>> Regards,
>> Corinna
>
>
>Hi,
>
>I'm using tcsh in MSDOS console, and the arrows don't work - I have to
>use emacs control sequences.  How can I enable arrows?
>
Are you using a .tcshrc file?  In a tcshrc file that I picked up somewhere,
it had these bindings defined - I had to comment them out to get things
to work correctly.  Even if this not your specific problem, at the very
least, at least this is telling you to give a look at the bindkey
definitions - you may need to either change them or actually define some.

# NT specific bindkey extensions
#       bindkey -b N-up up-history
#       bindkey -b N-down down-history

***************************************************************************
Christopher Murray			Applied Research Laboratory
Assistant Research Engineer		The Pennsylvania State University
Work Phone:  (814) 865-2016		P.O. Box 30
Home Phone: (814) 231-2125		State College, PA 16804
Work Fax: (814) 863-1479 		Email: cjm18@psu.edu
v1.2a r+d>s TW 1/0/pw tG 12? 0 Animals 3 2 57.5% <16dec98>
***************************************************************************


--   
Want to unsubscribe from this list?                             
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

bash, tcsh and perl

[Jun Ohya]

I've installed cygwin32 B20.1 and ActiveState perl 509 on Win95.

Using bash, the following script runs as expected, printing results on the bash screen.

Using tcsh from ftp.franken.de, a DOS window pops up, prints the results
there and exits, taking the DOS window with it.
If I run the script from the command prompt as "perl test.pl",
the output is shown on the same tcsh screen.

Is this the normal behavior for tcsh?  Or can a tweak my .tcshrc so it will
act the same as bash?

----<snip>----
~>cat test.pl
#!perl
print "No more windows, please!\n";
----<snip>----

TIA

-- 
Jun Ohya
jay@ro.bekkoame.ne.jp

  
-
For help on using this list (especially unsubscribing), send a message to
"gnu-win32-request@cygnus.com" with one line of text: "help".

Re: bash, tcsh and perl

[Corinna Vinschen]

Jun Ohya wrote:
> 
> I've installed cygwin32 B20.1 and ActiveState perl 509 on Win95.
> 
> Using bash, the following script runs as expected, printing results on the bash screen.
> 
> Using tcsh from ftp.franken.de, a DOS window pops up, prints the results
> there and exits, taking the DOS window with it.
> If I run the script from the command prompt as "perl test.pl",
> the output is shown on the same tcsh screen.
> 
> Is this the normal behavior for tcsh?  Or can a tweak my .tcshrc so it will
> act the same as bash?
> 
> ----<snip>----
> ~>cat test.pl
> #!perl
> print "No more windows, please!\n";
> ----<snip>----

Seems to be a effect only with ActiveState perl. I'm using cygwin ported
perl5.00501 and I got output into the terminal/console window, regardless of
the used shell and the CYGWIN=[no]tty mode.

Regards,
Corinna
-
For help on using this list (especially unsubscribing), send a message to
"gnu-win32-request@cygnus.com" with one line of text: "help".

Re: bash, tcsh and perl

[Corinna Vinschen]

Dr. Volker Zell wrote:
> 
> Hi Corinna
> 
> When doing a make with your latest cron, cron-2.9.2.src.tar.gz
> I get the following error:
> 
> ----
> 
> gcc -DPWBUFSIZ=512 -DPWBUFPOS=256 -DPWKEYWORD="\"\107\056\114\273\146\231\033\266\""   -c cron.cc -o cron.o
> In file included from cron.cc:31:
> CString.h:23: String: No such file or directory
> make: *** [cron.o] Error 1

Make has to compile with g++ instead of gcc. This works in my environment!
If you don't get it to work, try:

	CXXFLAGS=-I/usr/include/g++ $(PWBUFSIZ) $(PWBUFPOS) $(PWKEYWORD)
		   ^ according to your standard include path.

And please, don't publish your -DPW... values! You're risking your system security.

> -------------------------------
> 
> When doing a make with your passwd-1.0.tar.gz
> I get the following error:
> 
> ---
> 
> gcc -s -o passwd.exe passwd.o -lnetapi32
> passwd.o(.text+0x3d6):passwd.c: undefined reference to `NetUserChangePassword'
> collect2: ld returned 1 exit status
> make: *** [passwd.exe] Error 1
> 
> Any hints ?

Sorry, I forgot, that this function is defined first in a later snapshot,
winsup-19981230, I think. You only have to declare

	DWORD STDCALL NetUserChangePassword (LPWSTR, LPWSTR, LPWSTR, LPWSTR);

at the start of passwd.c, but behind 

	#include <winsup.h>

Regards,
Corinna
-
For help on using this list (especially unsubscribing), send a message to
"gnu-win32-request@cygnus.com" with one line of text: "help".

Re: bash, tcsh and perl

[Mumit Khan]

On Mon, 18 Jan 1999, Corinna Vinschen wrote:

> > gcc -DPWBUFSIZ=512 -DPWBUFPOS=256 -DPWKEYWORD="\"\107\056\114\273\146\231\033\266\""   -c cron.cc -o cron.o
> > In file included from cron.cc:31:
> > CString.h:23: String: No such file or directory
> > make: *** [cron.o] Error 1
> 
> Make has to compile with g++ instead of gcc. This works in my environment!
> If you don't get it to work, try:
> 
> 	CXXFLAGS=-I/usr/include/g++ $(PWBUFSIZ) $(PWBUFPOS) $(PWKEYWORD)
> 		   ^ according to your standard include path.
> 

There is no "String" in libg++ (it's String.h); besides, Cygnus egcs
distributions (in b20/20.1) do not have libg++, and I have finally dropped
support for it in egcs-1.1.1.

Which basically means that you'll have to build libg++ yourself (and watch
out for String.h vs string.h -- you'll need to create header.gcc file to
remap the names). My egcs-1.1 distribution does have it, and you can
probably just use the libg++ from there.

Regards,
Mumit


-
For help on using this list (especially unsubscribing), send a message to
"gnu-win32-request@cygnus.com" with one line of text: "help".

Re: bash, tcsh and perl

[Jun Ohya]

Corinna Vinschen wrote

>Seems to be a effect only with ActiveState perl. I'm using cygwin ported
>perl5.00501 and I got output into the terminal/console window, regardless of
>the used shell and the CYGWIN=[no]tty mode.
>
>Regards,
>Corinna

Seems so.  I had cygwin ported perl5.005.02 and it worked fine.  Installing Active
State caused havoc.  Funny thing is that the cygwin port is showing the same 
behavior now.  Guess I'll have to stick to bash for perl.

many thanks, Corinna

-- 
Jun Ohya
jay@ro.bekkoame.ne.jp


-
For help on using this list (especially unsubscribing), send a message to
"gnu-win32-request@cygnus.com" with one line of text: "help".