* Re: Problem with NT Server (newbie) [not found] <3.0.5.32.19990826163336.00d667a0@pop.ma.ultranet.com> @ 1999-08-26 13:44 ` Philippe NICOLAS 1999-08-26 14:37 ` Larry Hall (RFK Partners, Inc) 1999-08-31 23:49 ` Philippe NICOLAS 0 siblings, 2 replies; 6+ messages in thread From: Philippe NICOLAS @ 1999-08-26 13:44 UTC (permalink / raw) To: Larry Hall (RFK Partners, Inc), cygwin [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #1: Type: text/plain, Size: 1514 bytes --] thanks.. it runs but I do not change the path on the workstation and on the nt server... Workstation : PATH=//d/cygnus/CYGWIN~1/H-I586~1/bin://D/WINNT/system32://D/WINNT://F/NTRES KIT NT Server PATH=/cygnus/CYGWIN~1/H-I586~1/bin:/WINNT/system32:/WINNT:/NTRESKIT There is no letter in front of the directory path on the NT server .... I made the same install... Do you know why ??? ----- Message d'origine ----- De : Larry Hall (RFK Partners, Inc) <lhall@rfk.com> À : Philippe NICOLAS <philippenicolas@wanadoo.fr> Envoyé : jeudi 26 août 1999 22:33 Objet : Re: Problem with NT Server (newbie) > At 10:31 PM 8/26/99 +0200, you wrote: > >I try to use gcc on a NT server (on two nt server precisely) > >I copy cygwin1.dll under winnt\system32 > > > >in the bash i put gcc hello.c > >then a.exe > > > >command not found tell it to me !!! > >and only on ntserver, it works great on nt workstations.... > > > >Could you help me ? > > > >thanks > > > > > > > Is a.exe in your path? If not, you have to make sure the directory its in > is in you path or invoke it via ./a.exe... > > > Larry Hall lhall@rfk.com > RFK Partners, Inc. http://www.rfk.com > 118 Washington Street (508) 893-9779 - RFK Office > Holliston, MA 01746 (508) 893-9889 - FAX > (508) 560-1285 - cell phone > -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problem with NT Server (newbie) 1999-08-26 13:44 ` Problem with NT Server (newbie) Philippe NICOLAS @ 1999-08-26 14:37 ` Larry Hall (RFK Partners, Inc) 1999-08-31 23:49 ` Larry Hall (RFK Partners, Inc) 1999-08-31 23:49 ` Philippe NICOLAS 1 sibling, 1 reply; 6+ messages in thread From: Larry Hall (RFK Partners, Inc) @ 1999-08-26 14:37 UTC (permalink / raw) To: Philippe NICOLAS, cygwin@sourceware.cygnus.com [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #1: Type: text/plain, Size: 2208 bytes --] The reason the workstation installation has a //d in front of the path names is because you have NT installed on your D: partition. On the server machine, you have it installed on C:. Cygwin, by default, mounts C: as /. All other partitions are referenced, by default, using (the now deprecated) //<drive letter> notation. You'll need the "mount" utility to clearly see the default partition mounts/mappings. Larry Hall lhall@rfk.com RFK Partners, Inc. http://www.rfk.com 118 Washington Street (508) 893-9779 - RFK Office Holliston, MA 01746 (508) 893-9889 - FAX At 10:47 PM 8/26/99 +0200, Philippe NICOLAS wrote: >thanks.. it runs but I do not change the path on the workstation and on the >nt server... > >Workstation : >PATH=//d/cygnus/CYGWIN~1/H-I586~1/bin://D/WINNT/system32://D/WINNT://F/NTRES >KIT > >NT Server >PATH=/cygnus/CYGWIN~1/H-I586~1/bin:/WINNT/system32:/WINNT:/NTRESKIT > >There is no letter in front of the directory path on the NT server .... >I made the same install... > >Do you know why ??? > > >----- Message d'origine ----- >De : Larry Hall (RFK Partners, Inc) <lhall@rfk.com> >À : Philippe NICOLAS <philippenicolas@wanadoo.fr> >Envoyé : jeudi 26 août 1999 22:33 >Objet : Re: Problem with NT Server (newbie) > > >> At 10:31 PM 8/26/99 +0200, you wrote: >> >I try to use gcc on a NT server (on two nt server precisely) >> >I copy cygwin1.dll under winnt\system32 >> > >> >in the bash i put gcc hello.c >> >then a.exe >> > >> >command not found tell it to me !!! >> >and only on ntserver, it works great on nt workstations.... >> > >> >Could you help me ? >> > >> >thanks >> > >> > >> >> >> Is a.exe in your path? If not, you have to make sure the directory its in >> is in you path or invoke it via ./a.exe... >> >> >> Larry Hall lhall@rfk.com >> RFK Partners, Inc. http://www.rfk.com >> 118 Washington Street (508) 893-9779 - RFK Office >> Holliston, MA 01746 (508) 893-9889 - FAX >> > > -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problem with NT Server (newbie) 1999-08-26 14:37 ` Larry Hall (RFK Partners, Inc) @ 1999-08-31 23:49 ` Larry Hall (RFK Partners, Inc) 0 siblings, 0 replies; 6+ messages in thread From: Larry Hall (RFK Partners, Inc) @ 1999-08-31 23:49 UTC (permalink / raw) To: Philippe NICOLAS, cygwin@sourceware.cygnus.com [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #1: Type: text/plain, Size: 2208 bytes --] The reason the workstation installation has a //d in front of the path names is because you have NT installed on your D: partition. On the server machine, you have it installed on C:. Cygwin, by default, mounts C: as /. All other partitions are referenced, by default, using (the now deprecated) //<drive letter> notation. You'll need the "mount" utility to clearly see the default partition mounts/mappings. Larry Hall lhall@rfk.com RFK Partners, Inc. http://www.rfk.com 118 Washington Street (508) 893-9779 - RFK Office Holliston, MA 01746 (508) 893-9889 - FAX At 10:47 PM 8/26/99 +0200, Philippe NICOLAS wrote: >thanks.. it runs but I do not change the path on the workstation and on the >nt server... > >Workstation : >PATH=//d/cygnus/CYGWIN~1/H-I586~1/bin://D/WINNT/system32://D/WINNT://F/NTRES >KIT > >NT Server >PATH=/cygnus/CYGWIN~1/H-I586~1/bin:/WINNT/system32:/WINNT:/NTRESKIT > >There is no letter in front of the directory path on the NT server .... >I made the same install... > >Do you know why ??? > > >----- Message d'origine ----- >De : Larry Hall (RFK Partners, Inc) <lhall@rfk.com> >À : Philippe NICOLAS <philippenicolas@wanadoo.fr> >Envoyé : jeudi 26 août 1999 22:33 >Objet : Re: Problem with NT Server (newbie) > > >> At 10:31 PM 8/26/99 +0200, you wrote: >> >I try to use gcc on a NT server (on two nt server precisely) >> >I copy cygwin1.dll under winnt\system32 >> > >> >in the bash i put gcc hello.c >> >then a.exe >> > >> >command not found tell it to me !!! >> >and only on ntserver, it works great on nt workstations.... >> > >> >Could you help me ? >> > >> >thanks >> > >> > >> >> >> Is a.exe in your path? If not, you have to make sure the directory its in >> is in you path or invoke it via ./a.exe... >> >> >> Larry Hall lhall@rfk.com >> RFK Partners, Inc. http://www.rfk.com >> 118 Washington Street (508) 893-9779 - RFK Office >> Holliston, MA 01746 (508) 893-9889 - FAX >> > > -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problem with NT Server (newbie) 1999-08-26 13:44 ` Problem with NT Server (newbie) Philippe NICOLAS 1999-08-26 14:37 ` Larry Hall (RFK Partners, Inc) @ 1999-08-31 23:49 ` Philippe NICOLAS 1 sibling, 0 replies; 6+ messages in thread From: Philippe NICOLAS @ 1999-08-31 23:49 UTC (permalink / raw) To: Larry Hall (RFK Partners, Inc), cygwin [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #1: Type: text/plain, Size: 1514 bytes --] thanks.. it runs but I do not change the path on the workstation and on the nt server... Workstation : PATH=//d/cygnus/CYGWIN~1/H-I586~1/bin://D/WINNT/system32://D/WINNT://F/NTRES KIT NT Server PATH=/cygnus/CYGWIN~1/H-I586~1/bin:/WINNT/system32:/WINNT:/NTRESKIT There is no letter in front of the directory path on the NT server .... I made the same install... Do you know why ??? ----- Message d'origine ----- De : Larry Hall (RFK Partners, Inc) <lhall@rfk.com> À : Philippe NICOLAS <philippenicolas@wanadoo.fr> Envoyé : jeudi 26 août 1999 22:33 Objet : Re: Problem with NT Server (newbie) > At 10:31 PM 8/26/99 +0200, you wrote: > >I try to use gcc on a NT server (on two nt server precisely) > >I copy cygwin1.dll under winnt\system32 > > > >in the bash i put gcc hello.c > >then a.exe > > > >command not found tell it to me !!! > >and only on ntserver, it works great on nt workstations.... > > > >Could you help me ? > > > >thanks > > > > > > > Is a.exe in your path? If not, you have to make sure the directory its in > is in you path or invoke it via ./a.exe... > > > Larry Hall lhall@rfk.com > RFK Partners, Inc. http://www.rfk.com > 118 Washington Street (508) 893-9779 - RFK Office > Holliston, MA 01746 (508) 893-9889 - FAX > (508) 560-1285 - cell phone > -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 6+ messages in thread
* Problem with NT Server (newbie) @ 1999-08-26 13:28 Philippe NICOLAS 1999-08-31 23:49 ` Philippe NICOLAS 0 siblings, 1 reply; 6+ messages in thread From: Philippe NICOLAS @ 1999-08-26 13:28 UTC (permalink / raw) To: cygwin I try to use gcc on a NT server (on two nt server precisely) I copy cygwin1.dll under winnt\system32 in the bash i put gcc hello.c then a.exe command not found tell it to me !!! and only on ntserver, it works great on nt workstations.... Could you help me ? thanks -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 6+ messages in thread
* Problem with NT Server (newbie) 1999-08-26 13:28 Philippe NICOLAS @ 1999-08-31 23:49 ` Philippe NICOLAS 0 siblings, 0 replies; 6+ messages in thread From: Philippe NICOLAS @ 1999-08-31 23:49 UTC (permalink / raw) To: cygwin I try to use gcc on a NT server (on two nt server precisely) I copy cygwin1.dll under winnt\system32 in the bash i put gcc hello.c then a.exe command not found tell it to me !!! and only on ntserver, it works great on nt workstations.... Could you help me ? thanks -- Want to unsubscribe from this list? Send a message to cygwin-unsubscribe@sourceware.cygnus.com ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~1999-08-31 23:49 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <3.0.5.32.19990826163336.00d667a0@pop.ma.ultranet.com>
1999-08-26 13:44 ` Problem with NT Server (newbie) Philippe NICOLAS
1999-08-26 14:37 ` Larry Hall (RFK Partners, Inc)
1999-08-31 23:49 ` Larry Hall (RFK Partners, Inc)
1999-08-31 23:49 ` Philippe NICOLAS
1999-08-26 13:28 Philippe NICOLAS
1999-08-31 23:49 ` Philippe NICOLAS
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).