* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
@ 2000-04-25 8:59 Ulrich Jakobus
2000-04-25 9:04 ` DJ Delorie
0 siblings, 1 reply; 22+ messages in thread
From: Ulrich Jakobus @ 2000-04-25 8:59 UTC (permalink / raw)
To: cygwin, earnie_boyd
On Tue, 25 Apr 2000 07:15:03 -0700 (PDT), Earnie Boyd wrote:
>--- Ulrich Jakobus <u.jakobus@web.de> wrote:
>> On Tue, 25 Apr 2000 05:18:52 -0700 (PDT), Earnie Boyd wrote:
>>
>> >Sounds like you've the network paths in your environment PATH. AFAIR, this
>> has
>> >always been a problem. Try removing the networked paths from PATH
>> before/after
>> >starting bash.
>>
>> Unfortunately, this is not the problem. There are only directories on
>> my local hard disk in $PATH. However, the output of "set" also includes
>> variables
>>
>> !0:=0:/home4/jakobus/LAPACK_3.0/BLAS/SRC/
>> !A:='A:\'
>> !D:='D:\cygnus\cygwin-1.1.0\lib\gcc-lib\i686-pc-cygwin\2.95.2'
>> !E:='E:\zip'
>> !\:='\\Ihfbdc\Netzsoftware\FEKO_update'
>>
>> and indeed the "!\:" refers to a network directory. Can this be the
>> reason?
>
>Yes, it could be the reason
>
>> However, this is set only inside bash, not before in my
>> DOS shell, from where I start bash
>
>This is certainly strange. What's contained in the ~/.bashrc file.
I do not have a $HOME/.bashrc or $HOME/.bash_profile at the moment.
It seems to me that with the "!D:" etc. variables mentioned above,
CYGNUS keeps track of the last visited directories on the various
partitions. For instance, now I rebooted and have not accessed
any file on the floppy disk or any file over the network since
rebooting. If I now start a bash session, I only get the following
defined:
!C:='C:\WINNT\Profiles\jakobus.000\Desktop\Programme'
!D:='d:\corel\VERSIONS'
In particular, there is no reference to a network directory, but
still if I remove the network cable and type any CYGNUS command
from a DOS window, I observe a 40 to 80 sec delay.
>
>Ah, we're getting closer to the problem. I expect that Cygwin commands running
>from the DOS prompt to be slightly longer overall. Every instance of the
>command has to load and initialize Cygwin.
Well, I agree, but not that much longer. This should be fractions of
seconds, and it should not make a difference whether my network cable
is attached or not.
>
>You could also try one of the newer snapshots to see if that solves the
>problem.
>
I have tried this now as well (snapshot cygwin-inst-20000421.tar.gz,
version CYGWIN_NT-4.0 1.1.1(0.19/3/2) 2000-04-22 00:15:04 i686 unknown),
same effect.
As a cross test, I went again back to my CYGWIN installation
21.0(0.0/1/1) 1999-1-16 00:09:20, which I still had archived in
a zip file. There I do not observe the delays when the network
cable is not attached.
Cheers,
Ulrich
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
2000-04-25 8:59 CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection Ulrich Jakobus
@ 2000-04-25 9:04 ` DJ Delorie
2000-04-25 9:17 ` Ulrich Jakobus
2000-04-25 9:27 ` Chris Faylor
0 siblings, 2 replies; 22+ messages in thread
From: DJ Delorie @ 2000-04-25 9:04 UTC (permalink / raw)
To: u.jakobus; +Cc: cygwin
> I do not have a $HOME/.bashrc or $HOME/.bash_profile at the moment.
What is HOME set to? Or better, run "cygcheck -r -s -v" and send us
the output.
> It seems to me that with the "!D:" etc. variables mentioned above,
> CYGNUS keeps track of the last visited directories on the various
> partitions.
No, this is something that Windows does in order to preserve the
dos-ism of each drive having a "current directory", when there are
multiple "dos" machines running. It's documented in MSDN.
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
2000-04-25 9:04 ` DJ Delorie
@ 2000-04-25 9:17 ` Ulrich Jakobus
2000-04-25 9:45 ` DJ Delorie
2000-04-25 9:27 ` Chris Faylor
1 sibling, 1 reply; 22+ messages in thread
From: Ulrich Jakobus @ 2000-04-25 9:17 UTC (permalink / raw)
To: cygwin, DJ Delorie
[-- Attachment #1: Type: text/plain, Size: 398 bytes --]
On Tue, 25 Apr 2000 12:04:06 -0400, DJ Delorie wrote:
>
>> I do not have a $HOME/.bashrc or $HOME/.bash_profile at the moment.
>
>What is HOME set to? Or better, run "cygcheck -r -s -v" and send us
>the output.
HOME is set to "e:\jakobus", which is a local directory on my hard-
drive. The output of "cygcheck -r -s -v" is attached (C, D, and E
are all local NTFS partitions).
Thanks,
Ulrich
[-- Attachment #2: cygcheck.out --]
[-- Type: text/x-Algol68, Size: 9524 bytes --]
Cygnus Win95/NT Configuration Diagnostics
Current System Time: Tue Apr 25 16:07:50 2000
WinNT Ver 4.0 build 1381 Service Pack 6
Path: /usr/bin
/usr/local/bin
/cygdrive/c/WINNT/system32
/cygdrive/c/WINNT
/cygdrive/d/Programme/Network Associates/PGPNT
/cygdrive/d/PROGRAMME/INTEL/COMPILER30/PERFORM/bin
/cygdrive/d/Programme/Intel/edb32/
/cygdrive/d/Programme/Intel/compiler45/bin
/cygdrive/d/feko
/cygdrive/e/jakobus/feko_src/cygwin32/bin
/cygdrive/d/tools
/cygdrive/d/tools/sendpost
/cygdrive/d/tools/ssh
/cygdrive/d/tools/nc
/usr/bin
/cygdrive/d/compiler/bp701/bin
/cygdrive/d/miktex/texmf/miktex/bin
/cygdrive/d/programme/matlabr11/bin
/cygdrive/d/PROGRAMME/PERFORM/bin
/cygdrive/d/programme/devstudio/sharedide/bin/ide
/cygdrive/d/programme/devstudio/sharedide/bin
/cygdrive/d/programme/devstudio/vc/bin
/cygdrive/d/rsx/bin
/cygdrive/c/WINNT/system32
/cygdrive/c/WINNT
/cygdrive/d/Programme/Network Associates/PGPNT
SysDir: C:\WINNT\System32
WinDir: C:\WINNT
HOME = `/cygdrive/e/jakobus'
MAKE_MODE = `unix'
PWD = `//e/zip'
USER = `jakobus'
!C: = `C:\WINNT\Profiles\jakobus.000\Desktop\Programme'
!D: = `d:\corel\VERSIONS'
CLASSPATH = `d:\Programme\Exceed.nt\hcljrcsv.jar;d:\Programme\Exceed.nt\;'
COMPUTERNAME = `UJ-NTBK'
COMSPEC = `C:\WINNT\system32\cmd.exe'
FEKO = `d:\feko'
FEKOLANG = `e'
FEKO_WRITE = `d:\feko'
FEMAP = `d:\Programme\FEMAP60'
FONTDIR = `d:\picasso\fonts\'
HOSTNAME = `UJ-NTBK'
HOSTTYPE = `i686'
INCLUDE = `D:\PROGRAMME\INTEL\COMPILER30\PERFORM\include;d:\Programme\Intel\compiler45\include;D:\PROGRAMME\PERFORM\include;d:\programme\devstudio\vc\include;d:\programme\devstudio\vc\atl\include;d:\programme\devstudio\vc\mfc\include;%include%'
LIB = `D:\PROGRAMME\INTEL\COMPILER30\PERFORM\lib;d:\Programme\Intel\compiler45\lib;D:\PROGRAMME\PERFORM\lib;d:\programme\devstudio\vc\lib;d:\programme\devstudio\vc\mfc\lib;%lib%'
LOGONSERVER = `\\IHFBDC'
MACHTYPE = `i686-pc-cygwin'
MSDEVDIR = `d:\Programme\DevStudio\SharedIDE'
NUMBER_OF_PROCESSORS = `1'
OLDPWD = `/'
OS2LIBPATH = `C:\WINNT\system32\os2\dll;'
OS = `Windows_NT'
OSTYPE = `cygwin'
PATHEXT = `.COM;.EXE;.BAT;.CMD'
PROCESSOR_ARCHITECTURE = `x86'
PROCESSOR_IDENTIFIER = `x86 Family 6 Model 8 Stepping 1, GenuineIntel'
PROCESSOR_LEVEL = `6'
PROCESSOR_REVISION = `0801'
PROMPT = `$P$G'
RCSTZ = `CET-1CED-2,M3.5.0,M10.5.0'
SENDPOST_CFG = `d:\tools\sendpost'
SHELL = `/bin/sh'
SHLVL = `1'
SYSTEMDRIVE = `C:'
SYSTEMROOT = `C:\WINNT'
TEMP = `C:\TEMP'
TERM = `cygwin'
TMP = `C:\TEMP'
USERDOMAIN = `DEIHF'
USERNAME = `Jakobus'
USERPROFILE = `C:\WINNT\Profiles\jakobus.000'
WINDIR = `C:\WINNT'
_ = `/usr/bin/cygcheck'
HKEY_CURRENT_USER\Software\Cygnus Solutions
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2
(default) = `/cygdrive'
cygdrive flags = 0x00000020
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/
(default) = `d:\cygnus\cygwin-1.1.0'
flags = 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/ispell
(default) = `d:\Programme\emacs\site-lisp\ispell'
flags = 0x00000000
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/usr/bin
(default) = `d:\cygnus\cygwin-1.1.0\bin'
flags = 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/usr/lib
(default) = `d:\cygnus\cygwin-1.1.0\lib'
flags = 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\Program Options
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\00
(default) = `d:\Programme\emacs\site-lisp\ispell'
unix = `/ispell'
fbinary = 0x00000000
fsilent = 0x00000000
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\01
(default) = `d:\cygnus\cygwin-b20'
unix = `/'
fbinary = 0x00000000
fsilent = 0x00000000
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin B20
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin B20\B20.1
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\00
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\01
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\02
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\03
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\04
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\05
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\06
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\07
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\08
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\09
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0A
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0B
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0C
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0D
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0E
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0F
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\10
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\11
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\12
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\13
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\14
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\15
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\16
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\17
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\18
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\19
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1A
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1B
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1C
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1D
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\GNUPro
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\GNUPro\i586-cygwin32
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\GNUPro\i586-cygwin32\i586-cygwin32
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\GNUPro\i586-cygwin32\i586-cygwin32\cygwin-B20.1
(default) = `d:\cygnus\cygwin-b20'
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Cygnus Cygwin B20
(default) = `C:\WINNT\IsUninst.exe -fd:\cygnus\cygwin-b20\Uninst.isu'
DisplayName = `Cygwin B20'
a: fd N/A N/A
c: hd NTFS 2047Mb 34% CP CS UN PA FC WINDOWS
d: hd NTFS 2800Mb 82% CP CS UN PA FC Programme
e: hd NTFS 4000Mb 74% CP CS UN PA FC DATEN
h: cd N/A N/A
d:\Programme\emacs\site-lisp\ispell /ispell user textmode
d:\cygnus\cygwin-1.1.0\bin /usr/bin user binmode
d:\cygnus\cygwin-1.1.0\lib /usr/lib user binmode
d:\cygnus\cygwin-1.1.0 / user binmode
Found: d:\cygnus\cygwin-1.1.0\bin\bash.exe
Found: d:\cygnus\cygwin-1.1.0\bin\cat.exe
Found: d:\cygnus\cygwin-1.1.0\bin\cpp.exe
Found: d:\cygnus\cygwin-1.1.0\bin\find.exe
Found: d:\cygnus\cygwin-1.1.0\bin\gcc.exe
Found: d:\cygnus\cygwin-1.1.0\bin\gdb.exe
Found: d:\cygnus\cygwin-1.1.0\bin\ld.exe
Found: d:\cygnus\cygwin-1.1.0\bin\ls.exe
Found: d:\cygnus\cygwin-1.1.0\bin\make.exe
Found: d:\compiler\bp701\bin\make.exe
Warning: d:\cygnus\cygwin-1.1.0\bin\make.exe hides d:\compiler\bp701\bin\make.exe
Found: d:\cygnus\cygwin-1.1.0\bin\sh.exe
115k 1999/09/14 d:\cygnus\cygwin-1.1.0\bin\cygitcl30.dll - os=4.0 img=1.0 sys=4.0
"cygitcl30.dll" v0.0 ts=1999/9/14 2:46
63k 1999/09/14 d:\cygnus\cygwin-1.1.0\bin\cygitk30.dll - os=4.0 img=1.0 sys=4.0
"cygitk30.dll" v0.0 ts=1999/9/14 2:47
474k 1999/09/14 d:\cygnus\cygwin-1.1.0\bin\cygtcl80.dll - os=4.0 img=1.0 sys=4.0
"cygtcl80.dll" v0.0 ts=1999/9/14 2:31
19k 1999/09/14 d:\cygnus\cygwin-1.1.0\bin\cygtclpip80.dll - os=4.0 img=1.0 sys=4.0
24k 1999/09/14 d:\cygnus\cygwin-1.1.0\bin\cygtclreg80.dll - os=4.0 img=1.0 sys=4.0
"cygtclreg80.dll" v0.0 ts=1999/9/14 2:31
768k 1999/09/14 d:\cygnus\cygwin-1.1.0\bin\cygtk80.dll - os=4.0 img=1.0 sys=4.0
"cygtk80.dll" v0.0 ts=1999/9/14 2:36
596k 2000/04/22 d:\cygnus\cygwin-1.1.0\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0
"cygwin1.dll" v0.0 ts=2000/4/22 4:15
Use -h to see help about each section
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
2000-04-25 9:04 ` DJ Delorie
2000-04-25 9:17 ` Ulrich Jakobus
@ 2000-04-25 9:27 ` Chris Faylor
1 sibling, 0 replies; 22+ messages in thread
From: Chris Faylor @ 2000-04-25 9:27 UTC (permalink / raw)
To: cygwin
On Tue, Apr 25, 2000 at 12:04:06PM -0400, DJ Delorie wrote:
>
>> I do not have a $HOME/.bashrc or $HOME/.bash_profile at the moment.
>
>What is HOME set to? Or better, run "cygcheck -r -s -v" and send us
>the output.
The TMPDIR variable is also translated by cygwin1.dll v1.1.0. Is it
possible that this is a network path?
Also, if you run "strace -osomefile /bin/pwd" it will probably be
obvious what is causing the delay. There will be a really large
number in the first field of somefile.
>> It seems to me that with the "!D:" etc. variables mentioned above,
>> CYGNUS keeps track of the last visited directories on the various
>> partitions.
>
>No, this is something that Windows does in order to preserve the
>dos-ism of each drive having a "current directory", when there are
>multiple "dos" machines running. It's documented in MSDN.
Actually, we add the "!" in front of the environment variables. Microsoft
uses a "=" for these variables and we translate that to "!" since "="
is an invalid character for environment variable names in UNIX land.
cgf
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
2000-04-25 9:17 ` Ulrich Jakobus
@ 2000-04-25 9:45 ` DJ Delorie
0 siblings, 0 replies; 22+ messages in thread
From: DJ Delorie @ 2000-04-25 9:45 UTC (permalink / raw)
To: u.jakobus; +Cc: cygwin
The only thing I see that's odd is this line:
PWD = `//e/zip'
Especially since everything else uses /cygdrive/e/
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
2000-04-25 10:31 ` Ulrich Jakobus
2000-04-25 13:18 ` Chris Faylor
@ 2000-04-27 3:48 ` Terry Lincoln
1 sibling, 0 replies; 22+ messages in thread
From: Terry Lincoln @ 2000-04-27 3:48 UTC (permalink / raw)
To: Ulrich Jakobus, cygwin
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On Tue, Apr 25 2000 1:30 PM Ulrich Jakobus wrote:
> On Tue, 25 Apr 2000 13:07:52 -0400, Cygwin wrote:
>
> >On Tue, Apr 25, 2000 at 06:57:53PM +0200, Ulrich Jakobus wrote:
> >>> Also, if you run "strace -osomefile /bin/pwd" it will
> >>> probably be obvious what is causing the delay. There will be
> >>> a really large number in the first field of somefile.
> >>
> >>Unfortunately, this does not work. In can execute "/bin/pwd",
> >>but trying to run "strace /bin/pwd" results in the message
> >>
> >> strace: error creating process /bin/pwd, (error 3)
> >
> >Sorry. I should have said "strace -osomefile c:\cygwin\bin\pwd"
> >where c:\cygwin\bin == whereever is appropriate for your setup.
> >
>
> OK, I have never used this command before, and was therefore not
> aware of the correct syntax.
>
> I did now in a DOS window (network cable attached).
> cd \cygnus\cygwin-1.1.0\bin
> .\strace .\pwd
>
> No problem, the command runs without any visible delay and
> terminates correctly. Now I remove the network cable, and run
> ".\strace .\pwd" again. The execution seems to hang completely
> (not only 40 to 80 sec delay, I have been waiting for more than
> 10 minutes now), the last lines on the screen are
>
> 3119 1019256 [main] pwd 1000 sig_send: returning 0 from sending
> signal -2 12037 1031293 [main] pwd 1000 internal_getlogin:
> Domain: DEIHF
^^^^^
> 3200 1034493 [main] pwd 1000 internal_getlogin: Login Server:
> IHFBDC
^^^^^^
> 3058 1037551 [main] pwd 1000 internal_getlogin: Windows
> Username: Jakobus
^^^^^^^
I'm going to guess that the indicated items are your NT Domain
Name, Logon Server Name, and Logon UserName
These lines appear to try to contact your PDC or BDC to try and
detemine your logon account profile information. Such as your SID.
Without this
you may not get proper file permissions set AFAIK. Corinna knows
more about
this than I.
I believe that since Windows caches account information and uses it
when the
domain controller can't be contacted, it might well behoove Cygwin
to cache
the same information on a successful connect, and give up on the
connection after the first failed try, using instead the cached
info.
Unfortunately, AFAICS there is nothing to be done about the first
long delay
because even WinNT takes a longer time booting without a domain
controller to
contact. Unless something is present in the registry to indicate
caches
account status, Cygwin has to try and see for itself if the host is
there.
> 3083 1040634 [main] pwd 1000 lookup_name: name : Jakobus
>
> Does this information help? Even if after 10 minutes I attach the
> network cable again, the process remains hanging.
>
> I should perhaps mention that I work on a notebook computer which
> has a nice suspend function to save the main memory to disk and
> resume operation without rebooting. For this reason, I almost
> never boot, and when I work at home (without network connection),
> I simply switch on the notebook computer again and continue from
> where I stopped. I have absolutely no problems with other
> programs (of course when my e-mail program wants to make a POP
> connection it complains about being unable to connect, or if I
> want to print to a network printer), everything else runs fine,
> also the old CYGWIN-B20.1 did run without any trouble this way.
>
> Ulrich
>
>
>
>
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com
>
>
W. Terry Lincoln
Senior Solution Developer [Linux Registered User #99583]
Ciber corporation ICQ# 39362285
<mailto: WTerryLincoln@engineer.com>
<mailto: llincol1@rochester.rr.com>
< http://www.geocities.com/terry_lincoln >
< http://www.angelfire.com/ny/TerryLincoln >
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 6.5.2 for non-commercial use < http://www.pgp.com >
Comment: This message is signed with Pretty Good Privacy Key
iQA/AwUBOQZkPmdPbBTG5+8FEQKz7QCfS7HFy+EyKT2XtTpq6ttOgAs+uJ0AoIf7
1zPhqYjvgiBVb3gXk0MX0SjA
=vIvC
-----END PGP SIGNATURE-----
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
2000-04-25 13:18 ` Chris Faylor
@ 2000-04-26 13:53 ` Corinna Vinschen
0 siblings, 0 replies; 22+ messages in thread
From: Corinna Vinschen @ 2000-04-26 13:53 UTC (permalink / raw)
To: cygwin
Chris Faylor wrote:
> On Tue, Apr 25, 2000 at 07:30:57PM +0200, Ulrich Jakobus wrote:
> >12037 1031293 [main] pwd 1000 internal_getlogin: Domain: DEIHF
> > 3200 1034493 [main] pwd 1000 internal_getlogin: Login Server: IHFBDC
> > 3058 1037551 [main] pwd 1000 internal_getlogin: Windows Username: Jakobus
> > 3083 1040634 [main] pwd 1000 lookup_name: name : Jakobus
> >
> >Does this information help? Even if after 10 minutes I attach the network
> >cable again, the process remains hanging.
>
> It may help Corinna figure out what's happening. I was hoping that you
> would actually use the command that I indicated and might provide the
> output of the "somefile" which would provide a lot more context than the
> above.
lookup_name does nothing magically. It calls LookupAccountName().
If a login server is given, it tries to call it with that login
server first. If that call failes, LookupAccountName() is called
again with login server set to NULL which is equivalent to the
local system.
So, if the system hangs that way, it is related to the OS.
I wonder what there can be changed. On one hand there will
be probably no hanging if LookupAccountName() is called only
with NULL server but on the other hand that will disallow
correct security handling of domain users.
Maybe we should use the not NULL login server parameter
only if ntsec is ON...
> >[...]
> >to a network printer), everything else runs fine, also the old CYGWIN-B20.1
> >did run without any trouble this way.
That code wasn't part of b20.1
Corinna
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
@ 2000-04-26 10:30 Fritz Mueller
0 siblings, 0 replies; 22+ messages in thread
From: Fritz Mueller @ 2000-04-26 10:30 UTC (permalink / raw)
To: 'cygwin@sourceware.cygnus.com'
FWIW, I just installed 1.1.0 on my laptop (NT4,SP5) last night, and am
experiencing the same problem.
The delays that I experience don't seem to be as long what Ulrich reports,
though (more on the order of 10 to 15 seconds in my case.)
strace seems to indicate that the time is being spent in lookup_name
(invoked on my NT logon name.)
Another clue: if I've previously established contact with a domain
controller via dial-up networking, but am not currently connected, within
the call to lookup_name (according to strace) dial-up networking will pop up
a dialog asking me if I want to establish a dial-up connection. The top of
this dialog states that the reason for wanting to establish a dial-up
connection is that the system could not contact the domain controller that I
was connected to earlier.
--FritzM.
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
@ 2000-04-25 23:06 Ulrich Jakobus
0 siblings, 0 replies; 22+ messages in thread
From: Ulrich Jakobus @ 2000-04-25 23:06 UTC (permalink / raw)
To: cygwin; +Cc: Corinna Vinschen, Chris Faylor
As a follow-up to the previous e-mail from me, I did some more
experiments now and found something that might be quite important
to know:
Two situations must be distinguished:
a) The network cable is attached when I log-in into Windows
NT, I register for the domain DEIHF, and the environment
variable LOGONSERVER gets assigned a value IHFSRV or IHFBDC
(we have two Windows NT servers, and depending on the load
an automatic algorithm decides which one to use)
b) When I already remove the network cable while logging in
(but I still register for the domain DEIHF), I get a windows
NT message that "no domain server is available, a local copy
of the environment will be used instead", and the environment
variable LOGONSERVER is set to UJ-NTBK (this is my local
machine).
For the situation a), when executing a CYGNUS command without
network cable attached, the delay seems to be 75 to 80 sec now,
for the situation b) it is only about 15 sec.
When running the command "strace d:\cygnus\cygwin-1.1.0\bin\pwd"
for situation a) it hangs completely (last night I waited 10 min,
this morning now more than 6 min), for the situation b) the delay
is also only 15 sec, and pwd completes.
For the situation b) the last lines of the output file from strace
before it hangs are (for a full file for situation a) see previous
e-mail, file out.2):
485 33914 [sig] pwd 1000 wait_sig: sigcatch_nonmain 0xA4
202 34116 [main] pwd 1000 sig_send: pid 1000, signal -2, its_me 1
139 34255 [main] pwd 1000 sig_send: ReleaseSemaphore succeeded
129 34384 [main] pwd 1000 sig_send: Waiting for thiscomplete 0xB0
143 34527 [sig] pwd 1000 wait_sig: Ready. dwProcessid 220
996 35523 [sig] pwd 1000 wait_sig: awake
188 35711 [sig] pwd 1000 wait_sig: processing signal -2
150 35861 [main] pwd 1000 sig_send: returning 0 from sending signal -2
7853 43714 [main] pwd 1000 internal_getlogin: Domain: DEIHF
438 44152 [main] pwd 1000 internal_getlogin: Logon Server: IHFSRV
147 44299 [main] pwd 1000 internal_getlogin: Windows Username: Jakobus
231 44530 [main] pwd 1000 lookup_name: name : Jakobus
1711 46241 [sig] pwd 1000 wait_sig: signalled sigcomplete_main 0xB0
222 46463 [sig] pwd 1000 wait_sig: looping
Cheers,
Ulrich
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
@ 2000-04-25 22:30 Ulrich Jakobus
0 siblings, 0 replies; 22+ messages in thread
From: Ulrich Jakobus @ 2000-04-25 22:30 UTC (permalink / raw)
To: cygwin; +Cc: Chris Faylor, Corinna Vinschen
[-- Attachment #1: Type: text/plain, Size: 2212 bytes --]
Morning,
>>No problem, the command runs without any visible delay and terminates
>>correctly. Now I remove the network cable, and run ".\strace .\pwd" again.
>>The execution seems to hang completely (not only 40 to 80 sec delay, I
>>have been waiting for more than 10 minutes now), the last lines on the
>>screen are
>>
>> 3119 1019256 [main] pwd 1000 sig_send: returning 0 from sending signal -2
>>12037 1031293 [main] pwd 1000 internal_getlogin: Domain: DEIHF
>> 3200 1034493 [main] pwd 1000 internal_getlogin: Login Server: IHFBDC
>> 3058 1037551 [main] pwd 1000 internal_getlogin: Windows Username: Jakobus
>> 3083 1040634 [main] pwd 1000 lookup_name: name : Jakobus
>>
>>Does this information help? Even if after 10 minutes I attach the network
>>cable again, the process remains hanging.
>
>It may help Corinna figure out what's happening. I was hoping that you
>would actually use the command that I indicated and might provide the
>output of the "somefile" which would provide a lot more context than the
>above.
Sorry about providing only this last part of the file, attached
are two files that result from the execution of:
strace -oout.{1|2} d:\cygnus\cygwin-1.1.0\bin\pwd.exe
in a DOS window:
out.1: network cable was attached (file is complete, pwd runs without
any significant delay)
out.2: network cable removed (what is a bit strange now is that
as opposed to the test yesterday, where I waited for 10 min,
this command does indeed complete, and after about 15 sec,
I do get the output of "pwd")
Also if I now start e.g. a "bash" shell, the delay I observe this
morning when the network cable is not attached, is only about 15 sec
as well, and no longer 40 to 80 sec as it used to be since installing
CYGWIN-1.1.0. The only change I have done is that I installed yester-
day the latest CYGWIN snapshot, but did not reboot immediately, I
rebooted Windows NT only this morning (I also don't think that I
have to reboot if I exchange e.g. cygwin1.dll, the output of "uname -a"
always indicated that I was using the correct version). I might be
able to live with a 15 sec delay, this is not as bad as 40 to 80 sec.
Cheers,
Ulrich
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: out.1 --]
[-- Type: text/plain; charset=unknown-8bit; name="out.1", Size: 28836 bytes --]
**********************************************
Program name: d:\cygnus\cygwin-1.1.0\bin\pwd.exe
App version: 21.0, api: 0.14
DLL version: 1001.1, api: 0.19
DLL build: 2000-04-22 00:15:04
OS version: Windows NT-4.0
Date/Time: 2000-04-26 07:23:33
**********************************************
975 2096 [main] pwd 1000 environ_init: !C:=C:\WINNT\Profiles\All Users\Startmen\Programme
326 2422 [main] pwd 1000 environ_init: !D:=D:\cygnus
275 2697 [main] pwd 1000 environ_init: !E:=E:\zip
525 3222 [main] pwd 1000 environ_init: !EXITCODE=00000000
355 3577 [main] pwd 1000 environ_init: CLASSPATH=d:\Programme\Exceed.nt\hcljrcsv.jar;d:\Programme\Exceed.nt\;
442 4019 [main] pwd 1000 environ_init: COMPUTERNAME=UJ-NTBK
251 4270 [main] pwd 1000 environ_init: COMSPEC=C:\WINNT\system32\cmd.exe
253 4523 [main] pwd 1000 environ_init: FEKO=d:\feko
244 4767 [main] pwd 1000 environ_init: FEKOLANG=e
244 5011 [main] pwd 1000 environ_init: FEKO_WRITE=d:\feko
398 5409 [main] pwd 1000 environ_init: FEMAP=d:\Programme\FEMAP60
248 5657 [main] pwd 1000 environ_init: FONTDIR=d:\picasso\fonts\
247 5904 [main] pwd 1000 getwinenv: can't set native for HOME= since no environ yet
268 6172 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (e:\jakobus, no-keep-rel)
157 6329 [main] pwd 1000 normalize_win32_path: e:\jakobus = normalize_win32_path (e:\jakobus)
134 6463 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/e/jakobus = conv_to_posix_path (e:\jakobus)
367 6830 [main] pwd 1000 win_env::add_cache: posix /cygdrive/e/jakobus
128 6958 [main] pwd 1000 win_env::add_cache: native HOME=e:\jakobus
128 7086 [main] pwd 1000 posify: env var converted to HOME=/cygdrive/e/jakobus
243 7329 [main] pwd 1000 environ_init: HOME=/cygdrive/e/jakobus
244 7573 [main] pwd 1000 environ_init: HOMEDRIVE=Z:
245 7818 [main] pwd 1000 environ_init: HOMEPATH=\
245 8063 [main] pwd 1000 environ_init: HOMESHARE=\\ihfsrv\jakobus$
249 8312 [main] pwd 1000 environ_init: INCLUDE=D:\PROGRAMME\INTEL\COMPILER30\PERFORM\include;d:\Programme\Intel\compiler45\include;D:\PROGRAMME\PERFORM\include;d:\programme\devstudio\vc\include;d:\programme\devstudio\vc\atl\include;d:\programme\devstudio\vc\mfc\include;%include%
270 8582 [main] pwd 1000 environ_init: LIB=D:\PROGRAMME\INTEL\COMPILER30\PERFORM\lib;d:\Programme\Intel\compiler45\lib;D:\PROGRAMME\PERFORM\lib;d:\programme\devstudio\vc\lib;d:\programme\devstudio\vc\mfc\lib;%lib%
259 8841 [main] pwd 1000 environ_init: LOGONSERVER=\\UJ-NTBK
245 9086 [main] pwd 1000 environ_init: MSDEVDIR=d:\Programme\DevStudio\SharedIDE
247 9333 [main] pwd 1000 environ_init: NUMBER_OF_PROCESSORS=1
245 9578 [main] pwd 1000 environ_init: OS=Windows_NT
244 9822 [main] pwd 1000 environ_init: OS2LIBPATH=C:\WINNT\system32\os2\dll;
255 10077 [main] pwd 1000 getwinenv: can't set native for PATH= since no environ yet
260 10337 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (C:\WINNT\system32, keep-rel)
134 10471 [main] pwd 1000 normalize_win32_path: C:\WINNT\system32 = normalize_win32_path (C:\WINNT\system32)
134 10605 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/c/WINNT/system32 = conv_to_posix_path (C:\WINNT\system32)
136 10741 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (C:\WINNT, keep-rel)
131 10872 [main] pwd 1000 normalize_win32_path: C:\WINNT = normalize_win32_path (C:\WINNT)
132 11004 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/c/WINNT = conv_to_posix_path (C:\WINNT)
135 11139 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\Programme\Network Associates\PGPNT, keep-rel)
135 11274 [main] pwd 1000 normalize_win32_path: d:\Programme\Network Associates\PGPNT = normalize_win32_path (d:\Programme\Network Associates\PGPNT)
139 11413 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/Programme/Network Associates/PGPNT = conv_to_posix_path (d:\Programme\Network Associates\PGPNT)
155 11568 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (D:\PROGRAMME\INTEL\COMPILER30\PERFORM\bin, keep-rel)
138 11706 [main] pwd 1000 normalize_win32_path: D:\PROGRAMME\INTEL\COMPILER30\PERFORM\bin = normalize_win32_path (D:\PROGRAMME\INTEL\COMPILER30\PERFORM\bin)
140 11846 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/PROGRAMME/INTEL/COMPILER30/PERFORM/bin = conv_to_posix_path (D:\PROGRAMME\INTEL\COMPILER30\PERFORM\bin)
141 11987 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\Programme\Intel\edb32\, keep-rel)
135 12122 [main] pwd 1000 normalize_win32_path: d:\Programme\Intel\edb32\ = normalize_win32_path (d:\Programme\Intel\edb32\)
136 12258 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/Programme/Intel/edb32/ = conv_to_posix_path (d:\Programme\Intel\edb32\)
137 12395 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\Programme\Intel\compiler45\bin, keep-rel)
136 12531 [main] pwd 1000 normalize_win32_path: d:\Programme\Intel\compiler45\bin = normalize_win32_path (d:\Programme\Intel\compiler45\bin)
139 12670 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/Programme/Intel/compiler45/bin = conv_to_posix_path (d:\Programme\Intel\compiler45\bin)
139 12809 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\feko, keep-rel)
132 12941 [main] pwd 1000 normalize_win32_path: d:\feko = normalize_win32_path (d:\feko)
150 13091 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/feko = conv_to_posix_path (d:\feko)
135 13226 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (e:\jakobus\feko_src\cygwin32\bin, keep-rel)
136 13362 [main] pwd 1000 normalize_win32_path: e:\jakobus\feko_src\cygwin32\bin = normalize_win32_path (e:\jakobus\feko_src\cygwin32\bin)
138 13500 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/e/jakobus/feko_src/cygwin32/bin = conv_to_posix_path (e:\jakobus\feko_src\cygwin32\bin)
138 13638 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\tools, keep-rel)
132 13770 [main] pwd 1000 normalize_win32_path: d:\tools = normalize_win32_path (d:\tools)
133 13903 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/tools = conv_to_posix_path (d:\tools)
135 14038 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\tools\sendpost, keep-rel)
135 14173 [main] pwd 1000 normalize_win32_path: d:\tools\sendpost = normalize_win32_path (d:\tools\sendpost)
134 14307 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/tools/sendpost = conv_to_posix_path (d:\tools\sendpost)
136 14443 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\tools\ssh, keep-rel)
133 14576 [main] pwd 1000 normalize_win32_path: d:\tools\ssh = normalize_win32_path (d:\tools\ssh)
135 14711 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/tools/ssh = conv_to_posix_path (d:\tools\ssh)
134 14845 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\tools\nc, keep-rel)
132 14977 [main] pwd 1000 normalize_win32_path: d:\tools\nc = normalize_win32_path (d:\tools\nc)
133 15110 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/tools/nc = conv_to_posix_path (d:\tools\nc)
135 15245 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\cygnus\cygwin-1.1.0\bin, keep-rel)
135 15380 [main] pwd 1000 normalize_win32_path: d:\cygnus\cygwin-1.1.0\bin = normalize_win32_path (d:\cygnus\cygwin-1.1.0\bin)
136 15516 [main] pwd 1000 mount_info::conv_to_posix_path: /usr/bin = conv_to_posix_path (d:\cygnus\cygwin-1.1.0\bin)
134 15650 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\compiler\bp701\bin, keep-rel)
133 15783 [main] pwd 1000 normalize_win32_path: d:\compiler\bp701\bin = normalize_win32_path (d:\compiler\bp701\bin)
136 15919 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/compiler/bp701/bin = conv_to_posix_path (d:\compiler\bp701\bin)
147 16066 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\miktex\texmf\miktex\bin, keep-rel)
134 16200 [main] pwd 1000 normalize_win32_path: d:\miktex\texmf\miktex\bin = normalize_win32_path (d:\miktex\texmf\miktex\bin)
136 16336 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/miktex/texmf/miktex/bin = conv_to_posix_path (d:\miktex\texmf\miktex\bin)
139 16475 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\programme\matlabr11\bin, keep-rel)
135 16610 [main] pwd 1000 normalize_win32_path: d:\programme\matlabr11\bin = normalize_win32_path (d:\programme\matlabr11\bin)
136 16746 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/programme/matlabr11/bin = conv_to_posix_path (d:\programme\matlabr11\bin)
138 16884 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (D:\PROGRAMME\PERFORM\bin, keep-rel)
134 17018 [main] pwd 1000 normalize_win32_path: D:\PROGRAMME\PERFORM\bin = normalize_win32_path (D:\PROGRAMME\PERFORM\bin)
136 17154 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/PROGRAMME/PERFORM/bin = conv_to_posix_path (D:\PROGRAMME\PERFORM\bin)
140 17294 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\programme\devstudio\sharedide\bin\ide, keep-rel)
136 17430 [main] pwd 1000 normalize_win32_path: d:\programme\devstudio\sharedide\bin\ide = normalize_win32_path (d:\programme\devstudio\sharedide\bin\ide)
141 17571 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/programme/devstudio/sharedide/bin/ide = conv_to_posix_path (d:\programme\devstudio\sharedide\bin\ide)
141 17712 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\programme\devstudio\sharedide\bin, keep-rel)
136 17848 [main] pwd 1000 normalize_win32_path: d:\programme\devstudio\sharedide\bin = normalize_win32_path (d:\programme\devstudio\sharedide\bin)
139 17987 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/programme/devstudio/sharedide/bin = conv_to_posix_path (d:\programme\devstudio\sharedide\bin)
140 18127 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\programme\devstudio\vc\bin, keep-rel)
135 18262 [main] pwd 1000 normalize_win32_path: d:\programme\devstudio\vc\bin = normalize_win32_path (d:\programme\devstudio\vc\bin)
137 18399 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/programme/devstudio/vc/bin = conv_to_posix_path (d:\programme\devstudio\vc\bin)
138 18537 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\rsx\bin, keep-rel)
133 18670 [main] pwd 1000 normalize_win32_path: d:\rsx\bin = normalize_win32_path (d:\rsx\bin)
132 18802 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/rsx/bin = conv_to_posix_path (d:\rsx\bin)
135 18937 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (C:\WINNT\system32, keep-rel)
134 19071 [main] pwd 1000 normalize_win32_path: C:\WINNT\system32 = normalize_win32_path (C:\WINNT\system32)
134 19205 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/c/WINNT/system32 = conv_to_posix_path (C:\WINNT\system32)
136 19341 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (C:\WINNT, keep-rel)
132 19473 [main] pwd 1000 normalize_win32_path: C:\WINNT = normalize_win32_path (C:\WINNT)
132 19605 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/c/WINNT = conv_to_posix_path (C:\WINNT)
135 19740 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\Programme\Network Associates\PGPNT, keep-rel)
136 19876 [main] pwd 1000 normalize_win32_path: d:\Programme\Network Associates\PGPNT = normalize_win32_path (d:\Programme\Network Associates\PGPNT)
139 20015 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/Programme/Network Associates/PGPNT = conv_to_posix_path (d:\Programme\Network Associates\PGPNT)
421 20436 [main] pwd 1000 win_env::add_cache: posix /cygdrive/c/WINNT/system32:/cygdrive/c/WINNT:/cygdrive/d/Programme/Network Associates/PGPNT:/cygdrive/d/PROGRAMME/INTEL/COMPILER30/PERFORM/bin:/cygdrive/d/Programme/Intel/edb32/:/cygdrive/d/Programme/Intel/compiler45/bin:/cygdrive/d/feko:/cygdrive/e/jakobus/feko_src/cygwin32/bin:/cygdrive/d/tools:/cygdrive/d/tools/sendpost:/cygdrive/d/tools/ssh:/cygdrive/d/tools/nc:/usr/bin:/cygdrive/d/compiler/bp701/bin:/cygdrive/d/miktex/texmf/miktex/bin:/cygdrive/d/programme/matlabr11/bin:/cygdrive/d/PROGRAMME/PERFORM/bin:/cygdrive/d/programme/devstudio/sharedide/bin/ide:/cygdrive/d/programme/devstudio/sharedide/bin:/cygdrive/d/programme/devstudio/vc/bin:/cygdrive/d/rsx/bin:/cygdrive/c/WINNT/system32:/cygdrive/c/WINNT:/cygdrive/d/Programme/Network Associates/PGPNT
214 20650 [main] pwd 1000 win_env::add_cache: native PATH=C:\WINNT\system32;C:\WINNT;d:\Programme\Network Associates\PGPNT;D:\PROGRAMME\INTEL\COMPILER30\PERFORM\bin;d:\Programme\Intel\edb32\;d:\Programme\Intel\compiler45\bin;d:\feko;e:\jakobus\feko_src\cygwin32\bin;d:\tools;d:\tools\sendpost;d:\tools\ssh;d:\tools\nc;d:\cygnus\cygwin-1.1.0\bin;d:\compiler\bp701\bin;d:\miktex\texmf\miktex\bin;d:\programme\matlabr11\bin;D:\PROGRAMME\PERFORM\bin;d:\programme\devstudio\sharedide\bin\ide;d:\programme\devstudio\sharedide\bin;d:\programme\devstudio\vc\bin;d:\rsx\bin;C:\WINNT\system32;C:\WINNT;d:\Programme\Network Associates\PGPNT
181 20831 [main] pwd 1000 posify: env var converted to PATH=/cygdrive/c/WINNT/system32:/cygdrive/c/WINNT:/cygdrive/d/Programme/Network Associates/PGPNT:/cygdrive/d/PROGRAMME/INTEL/COMPILER30/PERFORM/bin:/cygdrive/d/Programme/Intel/edb32/:/cygdrive/d/Programme/Intel/compiler45/bin:/cygdrive/d/feko:/cygdrive/e/jakobus/feko_src/cygwin32/bin:/cygdrive/d/tools:/cygdrive/d/tools/sendpost:/cygdrive/d/tools/ssh:/cygdrive/d/tools/nc:/usr/bin:/cygdrive/d/compiler/bp701/bin:/cygdrive/d/miktex/texmf/miktex/bin:/cygdrive/d/programme/matlabr11/bin:/cygdrive/d/PROGRAMME/PERFORM/bin:/cygdrive/d/programme/devstudio/sharedide/bin/ide:/cygdrive/d/programme/devstudio/sharedide/bin:/cygdrive/d/programme/devstudio/vc/bin:/cygdrive/d/rsx/bin:/cygdrive/c/WINNT/system32:/cygdrive/c/WINNT:/cygdrive/d/Programme/Network Associates/PGPNT
311 21142 [main] pwd 1000 environ_init: PATH=/cygdrive/c/WINNT/system32:/cygdrive/c/WINNT:/cygdrive/d/Programme/Network Associates/PGPNT:/cygdrive/d/PROGRAMME/INTEL/COMPILER30/PERFORM/bin:/cygdrive/d/Programme/Intel/edb32/:/cygdrive/d/Programme/Intel/compiler45/bin:/cygdrive/d/feko:/cygdrive/e/jakobus/feko_src/cygwin32/bin:/cygdrive/d/tools:/cygdrive/d/tools/sendpost:/cygdrive/d/tools/ssh:/cygdrive/d/tools/nc:/usr/bin:/cygdrive/d/compiler/bp701/bin:/cygdrive/d/miktex/texmf/miktex/bin:/cygdrive/d/programme/matlabr11/bin:/cygdrive/d/PROGRAMME/PERFORM/bin:/cygdrive/d/programme/devstudio/sharedide/bin/ide:/cygdrive/d/programme/devstudio/sharedide/bin:/cygdrive/d/programme/devstudio/vc/bin:/cygdrive/d/rsx/bin:/cygdrive/c/WINNT/system32:/cygdrive/c/WINNT:/cygdrive/d/Programme/Network Associates/PGPNT
318 21460 [main] pwd 1000 environ_init: PATHEXT=.COM;.EXE;.BAT;.CMD
248 21708 [main] pwd 1000 environ_init: PROCESSOR_ARCHITECTURE=x86
246 21954 [main] pwd 1000 environ_init: PROCESSOR_IDENTIFIER=x86 Family 6 Model 8 Stepping 1, GenuineIntel
251 22205 [main] pwd 1000 environ_init: PROCESSOR_LEVEL=6
245 22450 [main] pwd 1000 environ_init: PROCESSOR_REVISION=0801
247 22697 [main] pwd 1000 environ_init: PROMPT=$P$G
244 22941 [main] pwd 1000 environ_init: RCSTZ=CET-1CED-2,M3.5.0,M10.5.0
258 23199 [main] pwd 1000 environ_init: SENDPOST_CFG=d:\tools\sendpost
246 23445 [main] pwd 1000 environ_init: SYSTEMDRIVE=C:
245 23690 [main] pwd 1000 environ_init: SYSTEMROOT=C:\WINNT
246 23936 [main] pwd 1000 environ_init: TEMP=C:\TEMP
244 24180 [main] pwd 1000 environ_init: TMP=C:\TEMP
244 24424 [main] pwd 1000 environ_init: USER=jakobus
245 24669 [main] pwd 1000 environ_init: USERDOMAIN=DEIHF
245 24914 [main] pwd 1000 environ_init: USERNAME=Jakobus
579 25493 [main] pwd 1000 environ_init: USERPROFILE=C:\WINNT\Profiles\jakobus.000
253 25746 [main] pwd 1000 environ_init: WINDIR=C:\WINNT
290 26036 [main] pwd 1000 pinfo_init: pid 1000, pgid 1000
475 26511 [main] pwd 1000 hinfo::extend: size 32, fds 0xA041230
359 26870 [main] pwd 1000 sigproc_init: process/signal handling enabled(1)
580 27450 [main] pwd 1000 hinfo::build_fhandler: /dev/conin - cb 128, fd 0, fh 0xA0412B8
143 27593 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0x3
132 27725 [main] pwd 1000 fhandler_base::init: created new fhandler_base for handle 0x3
181 27906 [main] pwd 1000 open_shared: name (null), shared 0x14040000, h 0x94
150 28056 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xFFFFFFFF
419 28475 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xF
228 28703 [main] pwd 1000 fhandler_termios::set_ctty: attached tty1073741824 sid 1000, pid 1000, tty->pgid 1000, tty->sid 1000
143 28846 [main] pwd 1000 fhandler_termios::set_ctty: resetting tty1073741824 sid. Was 1000, now 1000. pgid was 1000, now 1000.
139 28985 [main] pwd 1000 fhandler_console::open: opened conin$ 0xF, conout$ 0x13
170 29155 [main] pwd 1000 fhandler_console::output_tcsetattr: 0 = tcsetattr (,14040018) (ENABLE FLAGS 3) (lflag 107 oflag 9)
141 29296 [main] pwd 1000 hinfo::init_std_file_from_handle: fd 0, handle 0x3
507 29803 [main] pwd 1000 hinfo::build_fhandler: /dev/conout - cb 128, fd 1, fh 0xA0413A0
133 29936 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0x7
130 30066 [main] pwd 1000 fhandler_base::init: created new fhandler_base for handle 0x7
131 30197 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xFFFFFFFF
155 30352 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0x3
196 30548 [main] pwd 1000 fhandler_termios::set_ctty: attached tty1073741824 sid 1000, pid 1000, tty->pgid 1000, tty->sid 1000
139 30687 [main] pwd 1000 fhandler_termios::set_ctty: resetting tty1073741824 sid. Was 1000, now 1000. pgid was 1000, now 1000.
138 30825 [main] pwd 1000 fhandler_console::open: opened conin$ 0x3, conout$ 0x17
161 30986 [main] pwd 1000 fhandler_console::output_tcsetattr: 0 = tcsetattr (,14040018) (ENABLE FLAGS 3) (lflag 107 oflag 9)
139 31125 [main] pwd 1000 hinfo::init_std_file_from_handle: fd 1, handle 0x7
503 31628 [main] pwd 1000 hinfo::build_fhandler: /dev/conout - cb 128, fd 2, fh 0xA0414B8
133 31761 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xB
129 31890 [main] pwd 1000 fhandler_base::init: created new fhandler_base for handle 0xB
130 32020 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xFFFFFFFF
156 32176 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0x7
201 32377 [main] pwd 1000 fhandler_termios::set_ctty: attached tty1073741824 sid 1000, pid 1000, tty->pgid 1000, tty->sid 1000
141 32518 [main] pwd 1000 fhandler_termios::set_ctty: resetting tty1073741824 sid. Was 1000, now 1000. pgid was 1000, now 1000.
137 32655 [main] pwd 1000 fhandler_console::open: opened conin$ 0x7, conout$ 0x1B
162 32817 [main] pwd 1000 fhandler_console::output_tcsetattr: 0 = tcsetattr (,14040018) (ENABLE FLAGS 3) (lflag 107 oflag 9)
138 32955 [main] pwd 1000 hinfo::init_std_file_from_handle: fd 2, handle 0xB
381 33336 [main] pwd 1000 build_argv: argv[0] = 'd:\cygnus\cygwin-1.1.0\bin\pwd'
131 33467 [main] pwd 1000 build_argv: argv[1] = '(null)'
130 33597 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\cygnus\cygwin-1.1.0\bin\pwd, keep-rel)
139 33736 [main] pwd 1000 normalize_win32_path: d:\cygnus\cygwin-1.1.0\bin\pwd = normalize_win32_path (d:\cygnus\cygwin-1.1.0\bin\pwd)
142 33878 [main] pwd 1000 mount_info::conv_to_posix_path: /usr/bin/pwd = conv_to_posix_path (d:\cygnus\cygwin-1.1.0\bin\pwd)
136 34014 [main] pwd 1000 DllList::initAll: call to DllList::initAll
129 34143 [main] pwd 1000 dll_crt0_1: user_data->main 0x401300
547 34690 [sig] pwd 1000 wait_sig: sigcatch_nonmain 0xA4
188 34878 [main] pwd 1000 sig_send: pid 1000, signal -2, its_me 1
141 35019 [main] pwd 1000 sig_send: ReleaseSemaphore succeeded
129 35148 [main] pwd 1000 sig_send: Waiting for thiscomplete 0xB0
143 35291 [sig] pwd 1000 wait_sig: Ready. dwProcessid 268
146 35437 [sig] pwd 1000 wait_sig: awake
132 35569 [sig] pwd 1000 wait_sig: processing signal -2
144 35713 [main] pwd 1000 sig_send: returning 0 from sending signal -2
7581 43294 [main] pwd 1000 internal_getlogin: Domain: DEIHF
228 43522 [main] pwd 1000 internal_getlogin: Logon Server: UJ-NTBK
136 43658 [main] pwd 1000 internal_getlogin: Windows Username: Jakobus
222 43880 [main] pwd 1000 lookup_name: name : Jakobus
2897 46777 [main] pwd 1000 lookup_name: sid : [1001]
223 47000 [main] pwd 1000 internal_getlogin: Cygwins Username: Jakobus
162 47162 [main] pwd 1000 _open: open (/etc/passwd, 0x0)
2355 49517 [main] pwd 1000 hinfo::build_fhandler: some disk file - cb 64, fd 3, fh 0xA041770
145 49662 [main] pwd 1000 fhandler_disk_file::open: (/etc/passwd, 0x0)
133 49795 [main] pwd 1000 mount_info::conv_to_win32_path: conv_to_win32_path (/etc/passwd)
134 49929 [main] pwd 1000 normalize_posix_path: /etc/passwd = normalize_posix_path (/etc/passwd)
140 50069 [main] pwd 1000 mount_info::conv_to_win32_path: d:\cygnus\cygwin-1.1.0\etc\passwd(rel), d:\cygnus\cygwin-1.1.0\etc\passwd(abs) 0x2(flags) = conv_to_win32_path (/etc/passwd)
391 50460 [main] pwd 1000 symlink_info::check: GetFileAttributesA (d:\cygnus\cygwin-1.1.0\etc\passwd) failed
152 50612 [main] pwd 1000 ../../../../csrc/winsup/cygwin/path.cc:2169 seterrno: 3 (PATH_NOT_FOUND) -> 2
146 50758 [main] pwd 1000 symlink_info::check: 0 = symlink.check (d:\cygnus\cygwin-1.1.0\etc\passwd, 0x240F2B9) (0x2)
318 51076 [main] pwd 1000 symlink_info::check: GetFileAttributesA (d:\cygnus\cygwin-1.1.0\etc) failed
145 51221 [main] pwd 1000 ../../../../csrc/winsup/cygwin/path.cc:2169 seterrno: 2 (FILE_NOT_FOUND) -> 2
134 51355 [main] pwd 1000 symlink_info::check: 0 = symlink.check (d:\cygnus\cygwin-1.1.0\etc, 0x240F2B9) (0x0)
304 51659 [main] pwd 1000 symlink_info::check: not a symlink
139 51798 [main] pwd 1000 symlink_info::check: 0 = symlink.check (d:\cygnus\cygwin-1.1.0, 0x240F2B9) (0x0)
601 52399 [main] pwd 1000 path_conv::path_conv: GetVolumeInformation(d:\) = OK, full_path(d:\cygnus\cygwin-1.1.0\etc\passwd), set_has_acls(8)
406 52805 [main] pwd 1000 fhandler_base::open: (d:\cygnus\cygwin-1.1.0\etc\passwd, 0x0)
642 53447 [main] pwd 1000 fhandler_base::open: -1 = CreateFileA (d:\cygnus\cygwin-1.1.0\etc\passwd, 0x80000000, 0x3, 0x61087AC0, 0x3, 0x80, 0)
182 53629 [main] pwd 1000 ../../../../csrc/winsup/cygwin/fhandler.cc:339 seterrno: 3 (PATH_NOT_FOUND) -> 2
138 53767 [main] pwd 1000 fhandler_base::open: 0 = fhandler_base::open (d:\cygnus\cygwin-1.1.0\etc\passwd, 0x0)
135 53902 [main] pwd 1000 fhandler_disk_file::open: 0 = fhandler_disk_file::open (d:\cygnus\cygwin-1.1.0\etc\passwd, 0x0)
1200 55102 [main] pwd 1000 _open: -1 = open (/etc/passwd, 0x0)
132 55234 [main] pwd 1000 read_etc_passwd: Emulating /etc/passwd
2249 57483 [main] pwd 1000 _open: open (/etc/group, 0x0)
2352 59835 [main] pwd 1000 hinfo::build_fhandler: some disk file - cb 64, fd 3, fh 0xA0418F0
135 59970 [main] pwd 1000 fhandler_disk_file::open: (/etc/group, 0x0)
134 60104 [main] pwd 1000 mount_info::conv_to_win32_path: conv_to_win32_path (/etc/group)
136 60240 [main] pwd 1000 normalize_posix_path: /etc/group = normalize_posix_path (/etc/group)
140 60380 [main] pwd 1000 mount_info::conv_to_win32_path: d:\cygnus\cygwin-1.1.0\etc\group(rel), d:\cygnus\cygwin-1.1.0\etc\group(abs) 0x2(flags) = conv_to_win32_path (/etc/group)
377 60757 [main] pwd 1000 symlink_info::check: GetFileAttributesA (d:\cygnus\cygwin-1.1.0\etc\group) failed
149 60906 [main] pwd 1000 ../../../../csrc/winsup/cygwin/path.cc:2169 seterrno: 3 (PATH_NOT_FOUND) -> 2
157 61063 [main] pwd 1000 symlink_info::check: 0 = symlink.check (d:\cygnus\cygwin-1.1.0\etc\group, 0x240F589) (0x2)
324 61387 [main] pwd 1000 symlink_info::check: GetFileAttributesA (d:\cygnus\cygwin-1.1.0\etc) failed
145 61532 [main] pwd 1000 ../../../../csrc/winsup/cygwin/path.cc:2169 seterrno: 2 (FILE_NOT_FOUND) -> 2
135 61667 [main] pwd 1000 symlink_info::check: 0 = symlink.check (d:\cygnus\cygwin-1.1.0\etc, 0x240F589) (0x0)
304 61971 [main] pwd 1000 symlink_info::check: not a symlink
140 62111 [main] pwd 1000 symlink_info::check: 0 = symlink.check (d:\cygnus\cygwin-1.1.0, 0x240F589) (0x0)
588 62699 [main] pwd 1000 path_conv::path_conv: GetVolumeInformation(d:\) = OK, full_path(d:\cygnus\cygwin-1.1.0\etc\group), set_has_acls(8)
447 63146 [main] pwd 1000 fhandler_base::open: (d:\cygnus\cygwin-1.1.0\etc\group, 0x0)
632 63778 [main] pwd 1000 fhandler_base::open: -1 = CreateFileA (d:\cygnus\cygwin-1.1.0\etc\group, 0x80000000, 0x3, 0x61087AC0, 0x3, 0x80, 0)
177 63955 [main] pwd 1000 ../../../../csrc/winsup/cygwin/fhandler.cc:339 seterrno: 3 (PATH_NOT_FOUND) -> 2
136 64091 [main] pwd 1000 fhandler_base::open: 0 = fhandler_base::open (d:\cygnus\cygwin-1.1.0\etc\group, 0x0)
136 64227 [main] pwd 1000 fhandler_disk_file::open: 0 = fhandler_disk_file::open (d:\cygnus\cygwin-1.1.0\etc\group, 0x0)
1185 65412 [main] pwd 1000 _open: -1 = open (/etc/group, 0x0)
132 65544 [main] pwd 1000 read_etc_group: Emulating /etc/group
3765 69309 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (E:\zip, no-keep-rel)
159 69468 [main] pwd 1000 normalize_win32_path: E:\zip = normalize_win32_path (E:\zip)
137 69605 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/e/zip = conv_to_posix_path (E:\zip)
255 69860 [main] pwd 1000 getcwd_inner: 0xA0419F8 (/cygdrive/e/zip) = getcwd_inner (0xA0419F8, 261, posix)
636 70496 [main] pwd 1000 time: 956726613 = time (0)
132 70628 [main] pwd 1000 _fstat: 0 = fstat (1, 240FA80)
629 71257 [main] pwd 1000 isatty: 1 = isatty (1)
608 71865 [main] pwd 1000 _write: write (1, 0xA041C28, 16)
141 72006 [main] pwd 1000 fhandler_console::write: A041C28, 16
132 72138 [main] pwd 1000 fhandler_console::write: at 47(/) state is 1
277 72415 [main] pwd 1000 fhandler_console::write: 16 = write_console (,..16)
137 72552 [main] pwd 1000 _write: 16 = write (1, 0xA041C28, 16)
148 72700 [main] pwd 1000 do_exit: do_exit (0)
132 72832 [main] pwd 1000 void: 0x0 = signal (20, 0x1)
130 72962 [main] pwd 1000 void: 0x0 = signal (1, 0x1)
136 73098 [main] pwd 1000 void: 0x0 = signal (2, 0x1)
128 73226 [main] pwd 1000 void: 0x0 = signal (3, 0x1)
589 73815 [main] pwd 1000 _close: close (0)
861 74676 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xFFFFFFFF
1174 75850 [main] pwd 1000 _close: 0 = close (0)
585 76435 [main] pwd 1000 _close: close (1)
857 77292 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xFFFFFFFF
1167 78459 [main] pwd 1000 _close: 0 = close (1)
587 79046 [main] pwd 1000 _close: close (2)
852 79898 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xFFFFFFFF
1222 81120 [main] pwd 1000 _close: 0 = close (2)
13464 94584 [main] pwd 1000 proc_terminate: nchildren 0, nzombies 0
131 94715 [main] pwd 1000 proc_terminate: leaving
127 94842 [main] pwd 1000 sigproc_terminate: entering
128 94970 [main] pwd 1000 sigproc_terminate: done
126 95096 [main] pwd 1000 do_exit: 1000 == pgrp 1000, send SIG{HUP,CONT} to stopped children
132 95228 [main] pwd 1000 kill_pgrp: pid 1000, sig -1
351 95579 [main] pwd 1000 kill_pgrp: -1 = kill (1000, -1)
160 95739 [main] pwd 1000 __to_clock_t: dwHighDateTime 0, dwLowDateTime 300432
134 95873 [main] pwd 1000 __to_clock_t: total 00000000 0000001E
134 96007 [main] pwd 1000 __to_clock_t: dwHighDateTime 0, dwLowDateTime 400576
130 96137 [main] pwd 1000 __to_clock_t: total 00000000 00000028
175 96312 [main] pwd 1000 my_parent_is_alive: No parent_alive mutex
149 96461 [main] pwd 1000 do_exit: calling ExitProcess 0
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #3: out.2 --]
[-- Type: text/plain; charset=unknown-8bit; name="out.2", Size: 29044 bytes --]
**********************************************
Program name: d:\cygnus\cygwin-1.1.0\bin\pwd.exe
App version: 21.0, api: 0.14
DLL version: 1001.1, api: 0.19
DLL build: 2000-04-22 00:15:04
OS version: Windows NT-4.0
Date/Time: 2000-04-26 07:23:07
**********************************************
989 1988 [main] pwd 1000 environ_init: !C:=C:\WINNT\Profiles\All Users\Startmen\Programme
255 2243 [main] pwd 1000 environ_init: !D:=D:\cygnus
238 2481 [main] pwd 1000 environ_init: !E:=E:\zip
244 2725 [main] pwd 1000 environ_init: !EXITCODE=00000000
253 2978 [main] pwd 1000 environ_init: CLASSPATH=d:\Programme\Exceed.nt\hcljrcsv.jar;d:\Programme\Exceed.nt\;
251 3229 [main] pwd 1000 environ_init: COMPUTERNAME=UJ-NTBK
246 3475 [main] pwd 1000 environ_init: COMSPEC=C:\WINNT\system32\cmd.exe
253 3728 [main] pwd 1000 environ_init: FEKO=d:\feko
244 3972 [main] pwd 1000 environ_init: FEKOLANG=e
244 4216 [main] pwd 1000 environ_init: FEKO_WRITE=d:\feko
251 4467 [main] pwd 1000 environ_init: FEMAP=d:\Programme\FEMAP60
245 4712 [main] pwd 1000 environ_init: FONTDIR=d:\picasso\fonts\
244 4956 [main] pwd 1000 getwinenv: can't set native for HOME= since no environ yet
269 5225 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (e:\jakobus, no-keep-rel)
166 5391 [main] pwd 1000 normalize_win32_path: e:\jakobus = normalize_win32_path (e:\jakobus)
136 5527 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/e/jakobus = conv_to_posix_path (e:\jakobus)
376 5903 [main] pwd 1000 win_env::add_cache: posix /cygdrive/e/jakobus
129 6032 [main] pwd 1000 win_env::add_cache: native HOME=e:\jakobus
126 6158 [main] pwd 1000 posify: env var converted to HOME=/cygdrive/e/jakobus
244 6402 [main] pwd 1000 environ_init: HOME=/cygdrive/e/jakobus
244 6646 [main] pwd 1000 environ_init: HOMEDRIVE=Z:
243 6889 [main] pwd 1000 environ_init: HOMEPATH=\
243 7132 [main] pwd 1000 environ_init: HOMESHARE=\\ihfsrv\jakobus$
248 7380 [main] pwd 1000 environ_init: INCLUDE=D:\PROGRAMME\INTEL\COMPILER30\PERFORM\include;d:\Programme\Intel\compiler45\include;D:\PROGRAMME\PERFORM\include;d:\programme\devstudio\vc\include;d:\programme\devstudio\vc\atl\include;d:\programme\devstudio\vc\mfc\include;%include%
268 7648 [main] pwd 1000 environ_init: LIB=D:\PROGRAMME\INTEL\COMPILER30\PERFORM\lib;d:\Programme\Intel\compiler45\lib;D:\PROGRAMME\PERFORM\lib;d:\programme\devstudio\vc\lib;d:\programme\devstudio\vc\mfc\lib;%lib%
260 7908 [main] pwd 1000 environ_init: LOGONSERVER=\\UJ-NTBK
245 8153 [main] pwd 1000 environ_init: MSDEVDIR=d:\Programme\DevStudio\SharedIDE
245 8398 [main] pwd 1000 environ_init: NUMBER_OF_PROCESSORS=1
245 8643 [main] pwd 1000 environ_init: OS=Windows_NT
243 8886 [main] pwd 1000 environ_init: OS2LIBPATH=C:\WINNT\system32\os2\dll;
252 9138 [main] pwd 1000 getwinenv: can't set native for PATH= since no environ yet
260 9398 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (C:\WINNT\system32, keep-rel)
134 9532 [main] pwd 1000 normalize_win32_path: C:\WINNT\system32 = normalize_win32_path (C:\WINNT\system32)
134 9666 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/c/WINNT/system32 = conv_to_posix_path (C:\WINNT\system32)
135 9801 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (C:\WINNT, keep-rel)
131 9932 [main] pwd 1000 normalize_win32_path: C:\WINNT = normalize_win32_path (C:\WINNT)
133 10065 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/c/WINNT = conv_to_posix_path (C:\WINNT)
133 10198 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\Programme\Network Associates\PGPNT, keep-rel)
135 10333 [main] pwd 1000 normalize_win32_path: d:\Programme\Network Associates\PGPNT = normalize_win32_path (d:\Programme\Network Associates\PGPNT)
140 10473 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/Programme/Network Associates/PGPNT = conv_to_posix_path (d:\Programme\Network Associates\PGPNT)
156 10629 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (D:\PROGRAMME\INTEL\COMPILER30\PERFORM\bin, keep-rel)
135 10764 [main] pwd 1000 normalize_win32_path: D:\PROGRAMME\INTEL\COMPILER30\PERFORM\bin = normalize_win32_path (D:\PROGRAMME\INTEL\COMPILER30\PERFORM\bin)
142 10906 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/PROGRAMME/INTEL/COMPILER30/PERFORM/bin = conv_to_posix_path (D:\PROGRAMME\INTEL\COMPILER30\PERFORM\bin)
140 11046 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\Programme\Intel\edb32\, keep-rel)
134 11180 [main] pwd 1000 normalize_win32_path: d:\Programme\Intel\edb32\ = normalize_win32_path (d:\Programme\Intel\edb32\)
138 11318 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/Programme/Intel/edb32/ = conv_to_posix_path (d:\Programme\Intel\edb32\)
137 11455 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\Programme\Intel\compiler45\bin, keep-rel)
135 11590 [main] pwd 1000 normalize_win32_path: d:\Programme\Intel\compiler45\bin = normalize_win32_path (d:\Programme\Intel\compiler45\bin)
140 11730 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/Programme/Intel/compiler45/bin = conv_to_posix_path (d:\Programme\Intel\compiler45\bin)
139 11869 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\feko, keep-rel)
132 12001 [main] pwd 1000 normalize_win32_path: d:\feko = normalize_win32_path (d:\feko)
134 12135 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/feko = conv_to_posix_path (d:\feko)
134 12269 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (e:\jakobus\feko_src\cygwin32\bin, keep-rel)
135 12404 [main] pwd 1000 normalize_win32_path: e:\jakobus\feko_src\cygwin32\bin = normalize_win32_path (e:\jakobus\feko_src\cygwin32\bin)
138 12542 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/e/jakobus/feko_src/cygwin32/bin = conv_to_posix_path (e:\jakobus\feko_src\cygwin32\bin)
139 12681 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\tools, keep-rel)
131 12812 [main] pwd 1000 normalize_win32_path: d:\tools = normalize_win32_path (d:\tools)
135 12947 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/tools = conv_to_posix_path (d:\tools)
135 13082 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\tools\sendpost, keep-rel)
132 13214 [main] pwd 1000 normalize_win32_path: d:\tools\sendpost = normalize_win32_path (d:\tools\sendpost)
136 13350 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/tools/sendpost = conv_to_posix_path (d:\tools\sendpost)
135 13485 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\tools\ssh, keep-rel)
131 13616 [main] pwd 1000 normalize_win32_path: d:\tools\ssh = normalize_win32_path (d:\tools\ssh)
135 13751 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/tools/ssh = conv_to_posix_path (d:\tools\ssh)
134 13885 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\tools\nc, keep-rel)
131 14016 [main] pwd 1000 normalize_win32_path: d:\tools\nc = normalize_win32_path (d:\tools\nc)
133 14149 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/tools/nc = conv_to_posix_path (d:\tools\nc)
135 14284 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\cygnus\cygwin-1.1.0\bin, keep-rel)
133 14417 [main] pwd 1000 normalize_win32_path: d:\cygnus\cygwin-1.1.0\bin = normalize_win32_path (d:\cygnus\cygwin-1.1.0\bin)
136 14553 [main] pwd 1000 mount_info::conv_to_posix_path: /usr/bin = conv_to_posix_path (d:\cygnus\cygwin-1.1.0\bin)
134 14687 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\compiler\bp701\bin, keep-rel)
132 14819 [main] pwd 1000 normalize_win32_path: d:\compiler\bp701\bin = normalize_win32_path (d:\compiler\bp701\bin)
137 14956 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/compiler/bp701/bin = conv_to_posix_path (d:\compiler\bp701\bin)
146 15102 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\miktex\texmf\miktex\bin, keep-rel)
150 15252 [main] pwd 1000 normalize_win32_path: d:\miktex\texmf\miktex\bin = normalize_win32_path (d:\miktex\texmf\miktex\bin)
145 15397 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/miktex/texmf/miktex/bin = conv_to_posix_path (d:\miktex\texmf\miktex\bin)
137 15534 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\programme\matlabr11\bin, keep-rel)
134 15668 [main] pwd 1000 normalize_win32_path: d:\programme\matlabr11\bin = normalize_win32_path (d:\programme\matlabr11\bin)
138 15806 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/programme/matlabr11/bin = conv_to_posix_path (d:\programme\matlabr11\bin)
136 15942 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (D:\PROGRAMME\PERFORM\bin, keep-rel)
134 16076 [main] pwd 1000 normalize_win32_path: D:\PROGRAMME\PERFORM\bin = normalize_win32_path (D:\PROGRAMME\PERFORM\bin)
144 16220 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/PROGRAMME/PERFORM/bin = conv_to_posix_path (D:\PROGRAMME\PERFORM\bin)
139 16359 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\programme\devstudio\sharedide\bin\ide, keep-rel)
135 16494 [main] pwd 1000 normalize_win32_path: d:\programme\devstudio\sharedide\bin\ide = normalize_win32_path (d:\programme\devstudio\sharedide\bin\ide)
142 16636 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/programme/devstudio/sharedide/bin/ide = conv_to_posix_path (d:\programme\devstudio\sharedide\bin\ide)
141 16777 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\programme\devstudio\sharedide\bin, keep-rel)
135 16912 [main] pwd 1000 normalize_win32_path: d:\programme\devstudio\sharedide\bin = normalize_win32_path (d:\programme\devstudio\sharedide\bin)
144 17056 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/programme/devstudio/sharedide/bin = conv_to_posix_path (d:\programme\devstudio\sharedide\bin)
141 17197 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\programme\devstudio\vc\bin, keep-rel)
133 17330 [main] pwd 1000 normalize_win32_path: d:\programme\devstudio\vc\bin = normalize_win32_path (d:\programme\devstudio\vc\bin)
139 17469 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/programme/devstudio/vc/bin = conv_to_posix_path (d:\programme\devstudio\vc\bin)
137 17606 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\rsx\bin, keep-rel)
132 17738 [main] pwd 1000 normalize_win32_path: d:\rsx\bin = normalize_win32_path (d:\rsx\bin)
139 17877 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/rsx/bin = conv_to_posix_path (d:\rsx\bin)
135 18012 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (C:\WINNT\system32, keep-rel)
133 18145 [main] pwd 1000 normalize_win32_path: C:\WINNT\system32 = normalize_win32_path (C:\WINNT\system32)
135 18280 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/c/WINNT/system32 = conv_to_posix_path (C:\WINNT\system32)
134 18414 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (C:\WINNT, keep-rel)
131 18545 [main] pwd 1000 normalize_win32_path: C:\WINNT = normalize_win32_path (C:\WINNT)
139 18684 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/c/WINNT = conv_to_posix_path (C:\WINNT)
135 18819 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\Programme\Network Associates\PGPNT, keep-rel)
135 18954 [main] pwd 1000 normalize_win32_path: d:\Programme\Network Associates\PGPNT = normalize_win32_path (d:\Programme\Network Associates\PGPNT)
139 19093 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/d/Programme/Network Associates/PGPNT = conv_to_posix_path (d:\Programme\Network Associates\PGPNT)
443 19536 [main] pwd 1000 win_env::add_cache: posix /cygdrive/c/WINNT/system32:/cygdrive/c/WINNT:/cygdrive/d/Programme/Network Associates/PGPNT:/cygdrive/d/PROGRAMME/INTEL/COMPILER30/PERFORM/bin:/cygdrive/d/Programme/Intel/edb32/:/cygdrive/d/Programme/Intel/compiler45/bin:/cygdrive/d/feko:/cygdrive/e/jakobus/feko_src/cygwin32/bin:/cygdrive/d/tools:/cygdrive/d/tools/sendpost:/cygdrive/d/tools/ssh:/cygdrive/d/tools/nc:/usr/bin:/cygdrive/d/compiler/bp701/bin:/cygdrive/d/miktex/texmf/miktex/bin:/cygdrive/d/programme/matlabr11/bin:/cygdrive/d/PROGRAMME/PERFORM/bin:/cygdrive/d/programme/devstudio/sharedide/bin/ide:/cygdrive/d/programme/devstudio/sharedide/bin:/cygdrive/d/programme/devstudio/vc/bin:/cygdrive/d/rsx/bin:/cygdrive/c/WINNT/system32:/cygdrive/c/WINNT:/cygdrive/d/Programme/Network Associates/PGPNT
217 19753 [main] pwd 1000 win_env::add_cache: native PATH=C:\WINNT\system32;C:\WINNT;d:\Programme\Network Associates\PGPNT;D:\PROGRAMME\INTEL\COMPILER30\PERFORM\bin;d:\Programme\Intel\edb32\;d:\Programme\Intel\compiler45\bin;d:\feko;e:\jakobus\feko_src\cygwin32\bin;d:\tools;d:\tools\sendpost;d:\tools\ssh;d:\tools\nc;d:\cygnus\cygwin-1.1.0\bin;d:\compiler\bp701\bin;d:\miktex\texmf\miktex\bin;d:\programme\matlabr11\bin;D:\PROGRAMME\PERFORM\bin;d:\programme\devstudio\sharedide\bin\ide;d:\programme\devstudio\sharedide\bin;d:\programme\devstudio\vc\bin;d:\rsx\bin;C:\WINNT\system32;C:\WINNT;d:\Programme\Network Associates\PGPNT
181 19934 [main] pwd 1000 posify: env var converted to PATH=/cygdrive/c/WINNT/system32:/cygdrive/c/WINNT:/cygdrive/d/Programme/Network Associates/PGPNT:/cygdrive/d/PROGRAMME/INTEL/COMPILER30/PERFORM/bin:/cygdrive/d/Programme/Intel/edb32/:/cygdrive/d/Programme/Intel/compiler45/bin:/cygdrive/d/feko:/cygdrive/e/jakobus/feko_src/cygwin32/bin:/cygdrive/d/tools:/cygdrive/d/tools/sendpost:/cygdrive/d/tools/ssh:/cygdrive/d/tools/nc:/usr/bin:/cygdrive/d/compiler/bp701/bin:/cygdrive/d/miktex/texmf/miktex/bin:/cygdrive/d/programme/matlabr11/bin:/cygdrive/d/PROGRAMME/PERFORM/bin:/cygdrive/d/programme/devstudio/sharedide/bin/ide:/cygdrive/d/programme/devstudio/sharedide/bin:/cygdrive/d/programme/devstudio/vc/bin:/cygdrive/d/rsx/bin:/cygdrive/c/WINNT/system32:/cygdrive/c/WINNT:/cygdrive/d/Programme/Network Associates/PGPNT
312 20246 [main] pwd 1000 environ_init: PATH=/cygdrive/c/WINNT/system32:/cygdrive/c/WINNT:/cygdrive/d/Programme/Network Associates/PGPNT:/cygdrive/d/PROGRAMME/INTEL/COMPILER30/PERFORM/bin:/cygdrive/d/Programme/Intel/edb32/:/cygdrive/d/Programme/Intel/compiler45/bin:/cygdrive/d/feko:/cygdrive/e/jakobus/feko_src/cygwin32/bin:/cygdrive/d/tools:/cygdrive/d/tools/sendpost:/cygdrive/d/tools/ssh:/cygdrive/d/tools/nc:/usr/bin:/cygdrive/d/compiler/bp701/bin:/cygdrive/d/miktex/texmf/miktex/bin:/cygdrive/d/programme/matlabr11/bin:/cygdrive/d/PROGRAMME/PERFORM/bin:/cygdrive/d/programme/devstudio/sharedide/bin/ide:/cygdrive/d/programme/devstudio/sharedide/bin:/cygdrive/d/programme/devstudio/vc/bin:/cygdrive/d/rsx/bin:/cygdrive/c/WINNT/system32:/cygdrive/c/WINNT:/cygdrive/d/Programme/Network Associates/PGPNT
325 20571 [main] pwd 1000 environ_init: PATHEXT=.COM;.EXE;.BAT;.CMD
247 20818 [main] pwd 1000 environ_init: PROCESSOR_ARCHITECTURE=x86
246 21064 [main] pwd 1000 environ_init: PROCESSOR_IDENTIFIER=x86 Family 6 Model 8 Stepping 1, GenuineIntel
256 21320 [main] pwd 1000 environ_init: PROCESSOR_LEVEL=6
246 21566 [main] pwd 1000 environ_init: PROCESSOR_REVISION=0801
244 21810 [main] pwd 1000 environ_init: PROMPT=$P$G
249 22059 [main] pwd 1000 environ_init: RCSTZ=CET-1CED-2,M3.5.0,M10.5.0
247 22306 [main] pwd 1000 environ_init: SENDPOST_CFG=d:\tools\sendpost
245 22551 [main] pwd 1000 environ_init: SYSTEMDRIVE=C:
251 22802 [main] pwd 1000 environ_init: SYSTEMROOT=C:\WINNT
245 23047 [main] pwd 1000 environ_init: TEMP=C:\TEMP
243 23290 [main] pwd 1000 environ_init: TMP=C:\TEMP
250 23540 [main] pwd 1000 environ_init: USER=jakobus
244 23784 [main] pwd 1000 environ_init: USERDOMAIN=DEIHF
243 24027 [main] pwd 1000 environ_init: USERNAME=Jakobus
455 24482 [main] pwd 1000 environ_init: USERPROFILE=C:\WINNT\Profiles\jakobus.000
251 24733 [main] pwd 1000 environ_init: WINDIR=C:\WINNT
279 25012 [main] pwd 1000 pinfo_init: pid 1000, pgid 1000
490 25502 [main] pwd 1000 hinfo::extend: size 32, fds 0xA041230
384 25886 [main] pwd 1000 sigproc_init: process/signal handling enabled(1)
589 26475 [main] pwd 1000 hinfo::build_fhandler: /dev/conin - cb 128, fd 0, fh 0xA0412B8
152 26627 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0x3
132 26759 [main] pwd 1000 fhandler_base::init: created new fhandler_base for handle 0x3
181 26940 [main] pwd 1000 open_shared: name (null), shared 0x14040000, h 0x94
640 27580 [sig] pwd 1000 wait_sig: sigcatch_nonmain 0xA0
175 27755 [sig] pwd 1000 wait_sig: Ready. dwProcessid 269
8041 35796 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xFFFFFFFF
463 36259 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xF
235 36494 [main] pwd 1000 fhandler_termios::set_ctty: attached tty1073741824 sid 1000, pid 1000, tty->pgid 1000, tty->sid 1000
144 36638 [main] pwd 1000 fhandler_termios::set_ctty: resetting tty1073741824 sid. Was 1000, now 1000. pgid was 1000, now 1000.
139 36777 [main] pwd 1000 fhandler_console::open: opened conin$ 0xF, conout$ 0x13
171 36948 [main] pwd 1000 fhandler_console::output_tcsetattr: 0 = tcsetattr (,14040018) (ENABLE FLAGS 3) (lflag 107 oflag 9)
150 37098 [main] pwd 1000 hinfo::init_std_file_from_handle: fd 0, handle 0x3
515 37613 [main] pwd 1000 hinfo::build_fhandler: /dev/conout - cb 128, fd 1, fh 0xA0413A0
135 37748 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0x7
136 37884 [main] pwd 1000 fhandler_base::init: created new fhandler_base for handle 0x7
134 38018 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xFFFFFFFF
156 38174 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0x3
197 38371 [main] pwd 1000 fhandler_termios::set_ctty: attached tty1073741824 sid 1000, pid 1000, tty->pgid 1000, tty->sid 1000
139 38510 [main] pwd 1000 fhandler_termios::set_ctty: resetting tty1073741824 sid. Was 1000, now 1000. pgid was 1000, now 1000.
139 38649 [main] pwd 1000 fhandler_console::open: opened conin$ 0x3, conout$ 0x17
167 38816 [main] pwd 1000 fhandler_console::output_tcsetattr: 0 = tcsetattr (,14040018) (ENABLE FLAGS 3) (lflag 107 oflag 9)
139 38955 [main] pwd 1000 hinfo::init_std_file_from_handle: fd 1, handle 0x7
503 39458 [main] pwd 1000 hinfo::build_fhandler: /dev/conout - cb 128, fd 2, fh 0xA0414B8
139 39597 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xB
130 39727 [main] pwd 1000 fhandler_base::init: created new fhandler_base for handle 0xB
131 39858 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xFFFFFFFF
156 40014 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0x7
201 40215 [main] pwd 1000 fhandler_termios::set_ctty: attached tty1073741824 sid 1000, pid 1000, tty->pgid 1000, tty->sid 1000
140 40355 [main] pwd 1000 fhandler_termios::set_ctty: resetting tty1073741824 sid. Was 1000, now 1000. pgid was 1000, now 1000.
144 40499 [main] pwd 1000 fhandler_console::open: opened conin$ 0x7, conout$ 0x1B
163 40662 [main] pwd 1000 fhandler_console::output_tcsetattr: 0 = tcsetattr (,14040018) (ENABLE FLAGS 3) (lflag 107 oflag 9)
138 40800 [main] pwd 1000 hinfo::init_std_file_from_handle: fd 2, handle 0xB
253 41053 [main] pwd 1000 build_argv: argv[0] = 'd:\cygnus\cygwin-1.1.0\bin\pwd'
129 41182 [main] pwd 1000 build_argv: argv[1] = '(null)'
135 41317 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (d:\cygnus\cygwin-1.1.0\bin\pwd, keep-rel)
140 41457 [main] pwd 1000 normalize_win32_path: d:\cygnus\cygwin-1.1.0\bin\pwd = normalize_win32_path (d:\cygnus\cygwin-1.1.0\bin\pwd)
140 41597 [main] pwd 1000 mount_info::conv_to_posix_path: /usr/bin/pwd = conv_to_posix_path (d:\cygnus\cygwin-1.1.0\bin\pwd)
158 41755 [main] pwd 1000 DllList::initAll: call to DllList::initAll
131 41886 [main] pwd 1000 dll_crt0_1: user_data->main 0x401300
155 42041 [main] pwd 1000 sig_send: pid 1000, signal -2, its_me 1
143 42184 [main] pwd 1000 sig_send: ReleaseSemaphore succeeded
129 42313 [main] pwd 1000 sig_send: Waiting for thiscomplete 0xA4
141 42454 [sig] pwd 1000 wait_sig: awake
131 42585 [sig] pwd 1000 wait_sig: processing signal -2
137 42722 [sig] pwd 1000 wait_sig: signalled sigcomplete_main 0xA4
128 42850 [sig] pwd 1000 wait_sig: looping
143 42993 [main] pwd 1000 sig_send: returning 0 from sending signal -2
56136 99129 [main] pwd 1000 internal_getlogin: Domain: DEIHF
243 99372 [main] pwd 1000 internal_getlogin: Logon Server: UJ-NTBK
136 99508 [main] pwd 1000 internal_getlogin: Windows Username: Jakobus
250 99758 [main] pwd 1000 lookup_name: name : Jakobus
15019202 15118960 [main] pwd 1000 lookup_name: sid : [1001]
270 15119230 [main] pwd 1000 internal_getlogin: Cygwins Username: Jakobus
169 15119399 [main] pwd 1000 _open: open (/etc/passwd, 0x0)
2351 15121750 [main] pwd 1000 hinfo::build_fhandler: some disk file - cb 64, fd 3, fh 0xA041770
143 15121893 [main] pwd 1000 fhandler_disk_file::open: (/etc/passwd, 0x0)
134 15122027 [main] pwd 1000 mount_info::conv_to_win32_path: conv_to_win32_path (/etc/passwd)
134 15122161 [main] pwd 1000 normalize_posix_path: /etc/passwd = normalize_posix_path (/etc/passwd)
140 15122301 [main] pwd 1000 mount_info::conv_to_win32_path: d:\cygnus\cygwin-1.1.0\etc\passwd(rel), d:\cygnus\cygwin-1.1.0\etc\passwd(abs) 0x2(flags) = conv_to_win32_path (/etc/passwd)
399 15122700 [main] pwd 1000 symlink_info::check: GetFileAttributesA (d:\cygnus\cygwin-1.1.0\etc\passwd) failed
155 15122855 [main] pwd 1000 ../../../../csrc/winsup/cygwin/path.cc:2169 seterrno: 3 (PATH_NOT_FOUND) -> 2
148 15123003 [main] pwd 1000 symlink_info::check: 0 = symlink.check (d:\cygnus\cygwin-1.1.0\etc\passwd, 0x240F2B9) (0x2)
321 15123324 [main] pwd 1000 symlink_info::check: GetFileAttributesA (d:\cygnus\cygwin-1.1.0\etc) failed
147 15123471 [main] pwd 1000 ../../../../csrc/winsup/cygwin/path.cc:2169 seterrno: 2 (FILE_NOT_FOUND) -> 2
135 15123606 [main] pwd 1000 symlink_info::check: 0 = symlink.check (d:\cygnus\cygwin-1.1.0\etc, 0x240F2B9) (0x0)
309 15123915 [main] pwd 1000 symlink_info::check: not a symlink
139 15124054 [main] pwd 1000 symlink_info::check: 0 = symlink.check (d:\cygnus\cygwin-1.1.0, 0x240F2B9) (0x0)
608 15124662 [main] pwd 1000 path_conv::path_conv: GetVolumeInformation(d:\) = OK, full_path(d:\cygnus\cygwin-1.1.0\etc\passwd), set_has_acls(8)
407 15125069 [main] pwd 1000 fhandler_base::open: (d:\cygnus\cygwin-1.1.0\etc\passwd, 0x0)
649 15125718 [main] pwd 1000 fhandler_base::open: -1 = CreateFileA (d:\cygnus\cygwin-1.1.0\etc\passwd, 0x80000000, 0x3, 0x61087AC0, 0x3, 0x80, 0)
181 15125899 [main] pwd 1000 ../../../../csrc/winsup/cygwin/fhandler.cc:339 seterrno: 3 (PATH_NOT_FOUND) -> 2
135 15126034 [main] pwd 1000 fhandler_base::open: 0 = fhandler_base::open (d:\cygnus\cygwin-1.1.0\etc\passwd, 0x0)
135 15126169 [main] pwd 1000 fhandler_disk_file::open: 0 = fhandler_disk_file::open (d:\cygnus\cygwin-1.1.0\etc\passwd, 0x0)
1212 15127381 [main] pwd 1000 _open: -1 = open (/etc/passwd, 0x0)
133 15127514 [main] pwd 1000 read_etc_passwd: Emulating /etc/passwd
2329 15129843 [main] pwd 1000 _open: open (/etc/group, 0x0)
2350 15132193 [main] pwd 1000 hinfo::build_fhandler: some disk file - cb 64, fd 3, fh 0xA0418F0
135 15132328 [main] pwd 1000 fhandler_disk_file::open: (/etc/group, 0x0)
132 15132460 [main] pwd 1000 mount_info::conv_to_win32_path: conv_to_win32_path (/etc/group)
135 15132595 [main] pwd 1000 normalize_posix_path: /etc/group = normalize_posix_path (/etc/group)
139 15132734 [main] pwd 1000 mount_info::conv_to_win32_path: d:\cygnus\cygwin-1.1.0\etc\group(rel), d:\cygnus\cygwin-1.1.0\etc\group(abs) 0x2(flags) = conv_to_win32_path (/etc/group)
388 15133122 [main] pwd 1000 symlink_info::check: GetFileAttributesA (d:\cygnus\cygwin-1.1.0\etc\group) failed
456 15133578 [main] pwd 1000 ../../../../csrc/winsup/cygwin/path.cc:2169 seterrno: 3 (PATH_NOT_FOUND) -> 2
146 15133724 [main] pwd 1000 symlink_info::check: 0 = symlink.check (d:\cygnus\cygwin-1.1.0\etc\group, 0x240F589) (0x2)
371 15134095 [main] pwd 1000 symlink_info::check: GetFileAttributesA (d:\cygnus\cygwin-1.1.0\etc) failed
149 15134244 [main] pwd 1000 ../../../../csrc/winsup/cygwin/path.cc:2169 seterrno: 2 (FILE_NOT_FOUND) -> 2
134 15134378 [main] pwd 1000 symlink_info::check: 0 = symlink.check (d:\cygnus\cygwin-1.1.0\etc, 0x240F589) (0x0)
312 15134690 [main] pwd 1000 symlink_info::check: not a symlink
140 15134830 [main] pwd 1000 symlink_info::check: 0 = symlink.check (d:\cygnus\cygwin-1.1.0, 0x240F589) (0x0)
596 15135426 [main] pwd 1000 path_conv::path_conv: GetVolumeInformation(d:\) = OK, full_path(d:\cygnus\cygwin-1.1.0\etc\group), set_has_acls(8)
404 15135830 [main] pwd 1000 fhandler_base::open: (d:\cygnus\cygwin-1.1.0\etc\group, 0x0)
647 15136477 [main] pwd 1000 fhandler_base::open: -1 = CreateFileA (d:\cygnus\cygwin-1.1.0\etc\group, 0x80000000, 0x3, 0x61087AC0, 0x3, 0x80, 0)
181 15136658 [main] pwd 1000 ../../../../csrc/winsup/cygwin/fhandler.cc:339 seterrno: 3 (PATH_NOT_FOUND) -> 2
137 15136795 [main] pwd 1000 fhandler_base::open: 0 = fhandler_base::open (d:\cygnus\cygwin-1.1.0\etc\group, 0x0)
227 15137022 [main] pwd 1000 fhandler_disk_file::open: 0 = fhandler_disk_file::open (d:\cygnus\cygwin-1.1.0\etc\group, 0x0)
1211 15138233 [main] pwd 1000 _open: -1 = open (/etc/group, 0x0)
132 15138365 [main] pwd 1000 read_etc_group: Emulating /etc/group
3781 15142146 [main] pwd 1000 mount_info::conv_to_posix_path: conv_to_posix_path (E:\zip, no-keep-rel)
162 15142308 [main] pwd 1000 normalize_win32_path: E:\zip = normalize_win32_path (E:\zip)
137 15142445 [main] pwd 1000 mount_info::conv_to_posix_path: /cygdrive/e/zip = conv_to_posix_path (E:\zip)
253 15142698 [main] pwd 1000 getcwd_inner: 0xA0419F8 (/cygdrive/e/zip) = getcwd_inner (0xA0419F8, 261, posix)
635 15143333 [main] pwd 1000 time: 956726603 = time (0)
131 15143464 [main] pwd 1000 _fstat: 0 = fstat (1, 240FA80)
635 15144099 [main] pwd 1000 isatty: 1 = isatty (1)
610 15144709 [main] pwd 1000 _write: write (1, 0xA041C28, 16)
139 15144848 [main] pwd 1000 fhandler_console::write: A041C28, 16
131 15144979 [main] pwd 1000 fhandler_console::write: at 47(/) state is 1
276 15145255 [main] pwd 1000 fhandler_console::write: 16 = write_console (,..16)
138 15145393 [main] pwd 1000 _write: 16 = write (1, 0xA041C28, 16)
148 15145541 [main] pwd 1000 do_exit: do_exit (0)
132 15145673 [main] pwd 1000 void: 0x0 = signal (20, 0x1)
129 15145802 [main] pwd 1000 void: 0x0 = signal (1, 0x1)
128 15145930 [main] pwd 1000 void: 0x0 = signal (2, 0x1)
127 15146057 [main] pwd 1000 void: 0x0 = signal (3, 0x1)
589 15146646 [main] pwd 1000 _close: close (0)
873 15147519 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xFFFFFFFF
1169 15148688 [main] pwd 1000 _close: 0 = close (0)
587 15149275 [main] pwd 1000 _close: close (1)
852 15150127 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xFFFFFFFF
1166 15151293 [main] pwd 1000 _close: 0 = close (1)
586 15151879 [main] pwd 1000 _close: close (2)
853 15152732 [main] pwd 1000 fhandler_base::set_io_handle: set handle to 0xFFFFFFFF
1216 15153948 [main] pwd 1000 _close: 0 = close (2)
13513 15167461 [main] pwd 1000 proc_terminate: nchildren 0, nzombies 0
133 15167594 [main] pwd 1000 proc_terminate: leaving
127 15167721 [main] pwd 1000 sigproc_terminate: entering
129 15167850 [main] pwd 1000 sigproc_terminate: done
128 15167978 [main] pwd 1000 do_exit: 1000 == pgrp 1000, send SIG{HUP,CONT} to stopped children
139 15168117 [main] pwd 1000 kill_pgrp: pid 1000, sig -1
659 15168776 [main] pwd 1000 kill_pgrp: -1 = kill (1000, -1)
238 15169014 [main] pwd 1000 __to_clock_t: dwHighDateTime 0, dwLowDateTime 200288
167 15169181 [main] pwd 1000 __to_clock_t: total 00000000 00000014
137 15169318 [main] pwd 1000 __to_clock_t: dwHighDateTime 0, dwLowDateTime 300432
131 15169449 [main] pwd 1000 __to_clock_t: total 00000000 0000001E
160 15169609 [main] pwd 1000 my_parent_is_alive: No parent_alive mutex
152 15169761 [main] pwd 1000 do_exit: calling ExitProcess 0
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
2000-04-25 10:31 ` Ulrich Jakobus
@ 2000-04-25 13:18 ` Chris Faylor
2000-04-26 13:53 ` Corinna Vinschen
2000-04-27 3:48 ` Terry Lincoln
1 sibling, 1 reply; 22+ messages in thread
From: Chris Faylor @ 2000-04-25 13:18 UTC (permalink / raw)
To: cygwin; +Cc: Corinna Vinschen
On Tue, Apr 25, 2000 at 07:30:57PM +0200, Ulrich Jakobus wrote:
>No problem, the command runs without any visible delay and terminates
>correctly. Now I remove the network cable, and run ".\strace .\pwd" again.
>The execution seems to hang completely (not only 40 to 80 sec delay, I
>have been waiting for more than 10 minutes now), the last lines on the
>screen are
>
> 3119 1019256 [main] pwd 1000 sig_send: returning 0 from sending signal -2
>12037 1031293 [main] pwd 1000 internal_getlogin: Domain: DEIHF
> 3200 1034493 [main] pwd 1000 internal_getlogin: Login Server: IHFBDC
> 3058 1037551 [main] pwd 1000 internal_getlogin: Windows Username: Jakobus
> 3083 1040634 [main] pwd 1000 lookup_name: name : Jakobus
>
>Does this information help? Even if after 10 minutes I attach the network
>cable again, the process remains hanging.
It may help Corinna figure out what's happening. I was hoping that you
would actually use the command that I indicated and might provide the
output of the "somefile" which would provide a lot more context than the
above.
>I should perhaps mention that I work on a notebook computer which has a
>nice suspend function to save the main memory to disk and resume operation
>without rebooting. For this reason, I almost never boot, and when I work
>at home (without network connection), I simply switch on the notebook computer
>again and continue from where I stopped. I have absolutely no problems
>with other programs (of course when my e-mail program wants to make a POP
>connection it complains about being unable to connect, or if I want to print
>to a network printer), everything else runs fine, also the old CYGWIN-B20.1
>did run without any trouble this way.
I think I'm going to have to invent an email filter that weeds out the phrases
like this:
"(works|operates|runs).*(fine|swell|great|with no problem|perfectly).*\
(on|under|using) *(Linux|UNIX|HPUX|(Cygwin|gnu-win32) B[12][0-9](.[0-9])?)"
I think it will probably cut down on email traffic to this mailing list by
10 - 20%.
cgf
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
2000-04-25 10:08 ` Cygwin
@ 2000-04-25 10:31 ` Ulrich Jakobus
2000-04-25 13:18 ` Chris Faylor
2000-04-27 3:48 ` Terry Lincoln
0 siblings, 2 replies; 22+ messages in thread
From: Ulrich Jakobus @ 2000-04-25 10:31 UTC (permalink / raw)
To: cygwin
On Tue, 25 Apr 2000 13:07:52 -0400, Cygwin wrote:
>On Tue, Apr 25, 2000 at 06:57:53PM +0200, Ulrich Jakobus wrote:
>>> Also, if you run "strace -osomefile /bin/pwd" it will probably be
>>> obvious what is causing the delay. There will be a really large
>>> number in the first field of somefile.
>>
>>Unfortunately, this does not work. In can execute "/bin/pwd", but
>>trying to run "strace /bin/pwd" results in the message
>>
>> strace: error creating process /bin/pwd, (error 3)
>
>Sorry. I should have said "strace -osomefile c:\cygwin\bin\pwd" where
>c:\cygwin\bin == whereever is appropriate for your setup.
>
OK, I have never used this command before, and was therefore not aware
of the correct syntax.
I did now in a DOS window (network cable attached).
cd \cygnus\cygwin-1.1.0\bin
.\strace .\pwd
No problem, the command runs without any visible delay and terminates
correctly. Now I remove the network cable, and run ".\strace .\pwd" again.
The execution seems to hang completely (not only 40 to 80 sec delay, I
have been waiting for more than 10 minutes now), the last lines on the
screen are
3119 1019256 [main] pwd 1000 sig_send: returning 0 from sending signal -2
12037 1031293 [main] pwd 1000 internal_getlogin: Domain: DEIHF
3200 1034493 [main] pwd 1000 internal_getlogin: Login Server: IHFBDC
3058 1037551 [main] pwd 1000 internal_getlogin: Windows Username: Jakobus
3083 1040634 [main] pwd 1000 lookup_name: name : Jakobus
Does this information help? Even if after 10 minutes I attach the network
cable again, the process remains hanging.
I should perhaps mention that I work on a notebook computer which has a
nice suspend function to save the main memory to disk and resume operation
without rebooting. For this reason, I almost never boot, and when I work
at home (without network connection), I simply switch on the notebook computer
again and continue from where I stopped. I have absolutely no problems
with other programs (of course when my e-mail program wants to make a POP
connection it complains about being unable to connect, or if I want to print
to a network printer), everything else runs fine, also the old CYGWIN-B20.1
did run without any trouble this way.
Ulrich
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
2000-04-25 9:58 Ulrich Jakobus
@ 2000-04-25 10:08 ` Cygwin
2000-04-25 10:31 ` Ulrich Jakobus
0 siblings, 1 reply; 22+ messages in thread
From: Cygwin @ 2000-04-25 10:08 UTC (permalink / raw)
To: Ulrich Jakobus; +Cc: cygwin
On Tue, Apr 25, 2000 at 06:57:53PM +0200, Ulrich Jakobus wrote:
>> Also, if you run "strace -osomefile /bin/pwd" it will probably be
>> obvious what is causing the delay. There will be a really large
>> number in the first field of somefile.
>
>Unfortunately, this does not work. In can execute "/bin/pwd", but
>trying to run "strace /bin/pwd" results in the message
>
> strace: error creating process /bin/pwd, (error 3)
Sorry. I should have said "strace -osomefile c:\cygwin\bin\pwd" where
c:\cygwin\bin == whereever is appropriate for your setup.
cgf
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
@ 2000-04-25 9:58 Ulrich Jakobus
2000-04-25 10:08 ` Cygwin
0 siblings, 1 reply; 22+ messages in thread
From: Ulrich Jakobus @ 2000-04-25 9:58 UTC (permalink / raw)
To: Chris Faylor, cygwin
> The TMPDIR variable is also translated by cygwin1.dll v1.1.0. Is it
> possible that this is a network path?
TMPDIR is not set, but setting it to a local directory does not
make any difference concerning the delays.
> Also, if you run "strace -osomefile /bin/pwd" it will probably be
> obvious what is causing the delay. There will be a really large
> number in the first field of somefile.
Unfortunately, this does not work. In can execute "/bin/pwd", but
trying to run "strace /bin/pwd" results in the message
strace: error creating process /bin/pwd, (error 3)
(I have installed just 1 hour ago the latest available snapshot,
and "strace" has been replaced from there: 37376 Apr 22 04:26 /bin/strace)
However, I also went back to the clean CYGWIN-1.1.0 installation,
strace report the same error message.
Let me also reply to the message from DJ Delorie here:
> The only thing I see that's odd is this line:
>
> PWD = `//e/zip'
>
> Especially since everything else uses /cygdrive/e/
This happened accidentially and is not the default. If I open a bash
shell (with or without network cable attached), the contents of PWD
is e.g. "PWD=/cygdrive/d/cygnus/CYGWIN~1.0/bin". In this particular
case when I executed the command "cygcheck -r -s -v > cygcheck.out"
I changed before the directory by typing "cd //e/zip". Perhaps I
should have written "cd /cygdrive/e/zip", but this is not related
to the delay problems I have.
Ulrich
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
@ 2000-04-25 9:58 Earnie Boyd
0 siblings, 0 replies; 22+ messages in thread
From: Earnie Boyd @ 2000-04-25 9:58 UTC (permalink / raw)
To: DJ Delorie, u.jakobus; +Cc: cygwin
--- DJ Delorie <dj@delorie.com> wrote:
>
> The only thing I see that's odd is this line:
>
> PWD = `//e/zip'
>
> Especially since everything else uses /cygdrive/e/
>
This would happen if `cd //e/zip' were executed. This would cause the problem
of the delay.
=====
---
Earnie Boyd: < mailto:earnie_boyd@yahoo.com >
__Cygwin: POSIX on Windows__
Cygwin Newbies: < http://www.freeyellow.com/members5/gw32/index.html >
__Minimalist GNU for Windows__
Mingw32 List: < http://www.egroups.com/group/mingw32/ >
Mingw Home: < http://www.mingw.org/ >
__________________________________________________
Do You Yahoo!?
Send online invitations with Yahoo! Invites.
http://invites.yahoo.com
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
@ 2000-04-25 9:51 Bernard Dautrevaux
0 siblings, 0 replies; 22+ messages in thread
From: Bernard Dautrevaux @ 2000-04-25 9:51 UTC (permalink / raw)
To: 'Ulrich Jakobus', cygwin, DJ Delorie
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1365 bytes --]
Just one bizarre thing I've seen in your cygcheck output:
PWD=//e/zip
Could it be that for some reason, cygwin1.dll when initializing try to
access this path as current directory, then timeout on accessing machine
'E', interpreting //e/zip as share zip on machine E?...
--------------------------------------------
Bernard Dautrevaux
Microprocess Ingéniérie
97 bis, rue de Colombes
92400 COURBEVOIE
FRANCE
Tel: +33 (0) 1 47 68 80 80
Fax: +33 (0) 1 47 88 97 85
e-mail: dautrevaux@microprocess.com
b.dautrevaux@usa.net
--------------------------------------------
> -----Original Message-----
> From: Ulrich Jakobus [ mailto:u.jakobus@web.de ]
> Sent: Tuesday, April 25, 2000 6:17 PM
> To: cygwin@sourceware.cygnus.com; DJ Delorie
> Subject: Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network
> connection
>
>
> On Tue, 25 Apr 2000 12:04:06 -0400, DJ Delorie wrote:
>
> >
> >> I do not have a $HOME/.bashrc or $HOME/.bash_profile at the moment.
> >
> >What is HOME set to? Or better, run "cygcheck -r -s -v" and send us
> >the output.
>
> HOME is set to "e:\jakobus", which is a local directory on my hard-
> drive. The output of "cygcheck -r -s -v" is attached (C, D, and E
> are all local NTFS partitions).
>
> Thanks,
> Ulrich
>
>
>
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
2000-04-25 9:34 Earnie Boyd
@ 2000-04-25 9:47 ` Chris Faylor
0 siblings, 0 replies; 22+ messages in thread
From: Chris Faylor @ 2000-04-25 9:47 UTC (permalink / raw)
To: cygwin users
On Tue, Apr 25, 2000 at 09:33:55AM -0700, Earnie Boyd wrote:
>--- "Larry Hall (RFK Partners, Inc)" <lhall@rfk.com> wrote:
>-8<-
>>
>> Do you have HOME defined? If not, you're invoking a network path that way...
>>
>
>Interesting. Would that be because HOME gets set to / and then the value of
>HOME gets prepended to /.bashrc so that you end up with //.bashrc?
I thought that we'd fixed that problem long ago. I wonder if it crept back
into the "newest" version of bash.
cgf
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
@ 2000-04-25 9:34 Earnie Boyd
2000-04-25 9:47 ` Chris Faylor
0 siblings, 1 reply; 22+ messages in thread
From: Earnie Boyd @ 2000-04-25 9:34 UTC (permalink / raw)
To: Larry Hall (RFK Partners, Inc); +Cc: cygwin users
--- "Larry Hall (RFK Partners, Inc)" <lhall@rfk.com> wrote:
-8<-
>
> Do you have HOME defined? If not, you're invoking a network path that way...
>
Interesting. Would that be because HOME gets set to / and then the value of
HOME gets prepended to /.bashrc so that you end up with //.bashrc?
=====
---
Earnie Boyd: < mailto:earnie_boyd@yahoo.com >
__Cygwin: POSIX on Windows__
Cygwin Newbies: < http://www.freeyellow.com/members5/gw32/index.html >
__Minimalist GNU for Windows__
Mingw32 List: < http://www.egroups.com/group/mingw32/ >
Mingw Home: < http://www.mingw.org/ >
__________________________________________________
Do You Yahoo!?
Send online invitations with Yahoo! Invites.
http://invites.yahoo.com
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
@ 2000-04-25 7:15 Earnie Boyd
0 siblings, 0 replies; 22+ messages in thread
From: Earnie Boyd @ 2000-04-25 7:15 UTC (permalink / raw)
To: Ulrich Jakobus, cygwin
--- Ulrich Jakobus <u.jakobus@web.de> wrote:
> On Tue, 25 Apr 2000 05:18:52 -0700 (PDT), Earnie Boyd wrote:
>
> >Sounds like you've the network paths in your environment PATH. AFAIR, this
> has
> >always been a problem. Try removing the networked paths from PATH
> before/after
> >starting bash.
>
> Unfortunately, this is not the problem. There are only directories on
> my local hard disk in $PATH. However, the output of "set" also includes
> variables
>
> !0:=0:/home4/jakobus/LAPACK_3.0/BLAS/SRC/
> !A:='A:\'
> !D:='D:\cygnus\cygwin-1.1.0\lib\gcc-lib\i686-pc-cygwin\2.95.2'
> !E:='E:\zip'
> !\:='\\Ihfbdc\Netzsoftware\FEKO_update'
>
> and indeed the "!\:" refers to a network directory. Can this be the
> reason?
Yes, it could be the reason
> However, this is set only inside bash, not before in my
> DOS shell, from where I start bash
This is certainly strange. What's contained in the ~/.bashrc file.
> (I do observe the long delays
> only when executing CYGNUS commands from within a DOS window, not
> when running them from within BASH).
>
Ah, we're getting closer to the problem. I expect that Cygwin commands running
from the DOS prompt to be slightly longer overall. Every instance of the
command has to load and initialize Cygwin. There is a means to add the
Cygwin1.dll to the list of "Known DLL's" that get loaded on startup of the
environment and that might speed up the commands for you. I don't remember the
particulars of how to do this but it is in one of the cygwin archives I don't
remember if it was discussed in cygwin or cygwin-developers.
You could also try one of the newer snapshots to see if that solves the
problem.
> I also tried to remove other environment variables that might
> indicate a network connection, such as LOGONSERVER and USERDOMAIN,
> but also no effect with this.
>
These should have no affect.
Cheers,
=====
---
Earnie Boyd: < mailto:earnie_boyd@yahoo.com >
__Cygwin: POSIX on Windows__
Cygwin Newbies: < http://www.freeyellow.com/members5/gw32/index.html >
__Minimalist GNU for Windows__
Mingw32 List: < http://www.egroups.com/group/mingw32/ >
Mingw Home: < http://www.mingw.org/ >
__________________________________________________
Do You Yahoo!?
Send online invitations with Yahoo! Invites.
http://invites.yahoo.com
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
2000-04-25 5:19 Earnie Boyd
@ 2000-04-25 6:54 ` Ulrich Jakobus
0 siblings, 0 replies; 22+ messages in thread
From: Ulrich Jakobus @ 2000-04-25 6:54 UTC (permalink / raw)
To: cygwin, earnie_boyd
On Tue, 25 Apr 2000 05:18:52 -0700 (PDT), Earnie Boyd wrote:
>Sounds like you've the network paths in your environment PATH. AFAIR, this has
>always been a problem. Try removing the networked paths from PATH before/after
>starting bash.
Unfortunately, this is not the problem. There are only directories on
my local hard disk in $PATH. However, the output of "set" also includes
variables
!0:=0:/home4/jakobus/LAPACK_3.0/BLAS/SRC/
!A:='A:\'
!D:='D:\cygnus\cygwin-1.1.0\lib\gcc-lib\i686-pc-cygwin\2.95.2'
!E:='E:\zip'
!\:='\\Ihfbdc\Netzsoftware\FEKO_update'
and indeed the "!\:" refers to a network directory. Can this be the
reason? However, this is set only inside bash, not before in my
DOS shell, from where I start bash (I do observe the long delays
only when executing CYGNUS commands from within a DOS window, not
when running them from within BASH).
I also tried to remove other environment variables that might
indicate a network connection, such as LOGONSERVER and USERDOMAIN,
but also no effect with this.
Ulrich
>--- Ulrich Jakobus <u.jakobus@web.de> wrote:
>> Hello,
>>
>> last week I upgraded from CYGWIN B21 to the new net release
>> CYGWIN 1.1.0. I have absolutely no trouble when my computer
>> is connected to the network (Ethernet). However, this is a
>> notebook computer running under Windows NT 4.0 service pack 6,
>> and whenever I work at home I do not have a permanent network
>> connection.
>>
>> The following effect is fully reproducable:
>>
>> If I disconnect my network cable and want to execute any
>> CYGWIN command (e.g. open a bash shell, type "ls" in a DOS
>> window, execute "make" from within emacs etc.), I have to
>> wait for about 40 to 80 seconds, then I get the correct result
>> (e.g. if I type "ls" only after 40 to 80 sec I get the list
>> of files, no error or so is printed). As soon as I attach the
>> network cable again, I get an immediate response. I also
>> can open a bash shell (also delay 40 to 80 sec), but then
>> inside this bash shell I can execute CYGWIN commands and
>> get an immediate response. The same problem applies to
>> applications that I compile with gcc.
>>
>> Does anybody else observe this problem? Any idea how to fix it?
>> I did not have this or similar problems with CYGWIN B21.
>>
>> Thanks,
>>
>> Ulrich
>>
>>
>>
>>
>> --
>> Want to unsubscribe from this list?
>> Send a message to cygwin-unsubscribe@sourceware.cygnus.com
>>
>>
>
>__________________________________________________
>Do You Yahoo!?
>Send online invitations with Yahoo! Invites.
> http://invites.yahoo.com
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
@ 2000-04-25 5:19 Earnie Boyd
2000-04-25 6:54 ` Ulrich Jakobus
0 siblings, 1 reply; 22+ messages in thread
From: Earnie Boyd @ 2000-04-25 5:19 UTC (permalink / raw)
To: Ulrich Jakobus, cygwin
Sounds like you've the network paths in your environment PATH. AFAIR, this has
always been a problem. Try removing the networked paths from PATH before/after
starting bash.
Earnie.
--- Ulrich Jakobus <u.jakobus@web.de> wrote:
> Hello,
>
> last week I upgraded from CYGWIN B21 to the new net release
> CYGWIN 1.1.0. I have absolutely no trouble when my computer
> is connected to the network (Ethernet). However, this is a
> notebook computer running under Windows NT 4.0 service pack 6,
> and whenever I work at home I do not have a permanent network
> connection.
>
> The following effect is fully reproducable:
>
> If I disconnect my network cable and want to execute any
> CYGWIN command (e.g. open a bash shell, type "ls" in a DOS
> window, execute "make" from within emacs etc.), I have to
> wait for about 40 to 80 seconds, then I get the correct result
> (e.g. if I type "ls" only after 40 to 80 sec I get the list
> of files, no error or so is printed). As soon as I attach the
> network cable again, I get an immediate response. I also
> can open a bash shell (also delay 40 to 80 sec), but then
> inside this bash shell I can execute CYGWIN commands and
> get an immediate response. The same problem applies to
> applications that I compile with gcc.
>
> Does anybody else observe this problem? Any idea how to fix it?
> I did not have this or similar problems with CYGWIN B21.
>
> Thanks,
>
> Ulrich
>
>
>
>
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com
>
>
__________________________________________________
Do You Yahoo!?
Send online invitations with Yahoo! Invites.
http://invites.yahoo.com
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
* CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection
@ 2000-04-25 1:31 Ulrich Jakobus
0 siblings, 0 replies; 22+ messages in thread
From: Ulrich Jakobus @ 2000-04-25 1:31 UTC (permalink / raw)
To: cygwin
Hello,
last week I upgraded from CYGWIN B21 to the new net release
CYGWIN 1.1.0. I have absolutely no trouble when my computer
is connected to the network (Ethernet). However, this is a
notebook computer running under Windows NT 4.0 service pack 6,
and whenever I work at home I do not have a permanent network
connection.
The following effect is fully reproducable:
If I disconnect my network cable and want to execute any
CYGWIN command (e.g. open a bash shell, type "ls" in a DOS
window, execute "make" from within emacs etc.), I have to
wait for about 40 to 80 seconds, then I get the correct result
(e.g. if I type "ls" only after 40 to 80 sec I get the list
of files, no error or so is printed). As soon as I attach the
network cable again, I get an immediate response. I also
can open a bash shell (also delay 40 to 80 sec), but then
inside this bash shell I can execute CYGWIN commands and
get an immediate response. The same problem applies to
applications that I compile with gcc.
Does anybody else observe this problem? Any idea how to fix it?
I did not have this or similar problems with CYGWIN B21.
Thanks,
Ulrich
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2000-04-27 3:48 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-04-25 8:59 CYGWIN-1.1.0 trouble: 40 to 80 sec delay if no network connection Ulrich Jakobus
2000-04-25 9:04 ` DJ Delorie
2000-04-25 9:17 ` Ulrich Jakobus
2000-04-25 9:45 ` DJ Delorie
2000-04-25 9:27 ` Chris Faylor
-- strict thread matches above, loose matches on Subject: below --
2000-04-26 10:30 Fritz Mueller
2000-04-25 23:06 Ulrich Jakobus
2000-04-25 22:30 Ulrich Jakobus
2000-04-25 9:58 Ulrich Jakobus
2000-04-25 10:08 ` Cygwin
2000-04-25 10:31 ` Ulrich Jakobus
2000-04-25 13:18 ` Chris Faylor
2000-04-26 13:53 ` Corinna Vinschen
2000-04-27 3:48 ` Terry Lincoln
2000-04-25 9:58 Earnie Boyd
2000-04-25 9:51 Bernard Dautrevaux
2000-04-25 9:34 Earnie Boyd
2000-04-25 9:47 ` Chris Faylor
2000-04-25 7:15 Earnie Boyd
2000-04-25 5:19 Earnie Boyd
2000-04-25 6:54 ` Ulrich Jakobus
2000-04-25 1:31 Ulrich Jakobus
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).