* Another bash problem?
@ 2000-05-31 21:22 Guansong Zhang
2000-05-31 21:40 ` Chris Faylor
2000-06-02 3:05 ` Kazuhiro Fujieda
0 siblings, 2 replies; 8+ messages in thread
From: Guansong Zhang @ 2000-05-31 21:22 UTC (permalink / raw)
To: cygwin
I used to export CYGWIN=tty in B20.1, I forgot the exact reason.
But with the latest net release, this setting has a problem.
With the above setting under bash prompt type
$ bash
$ exit
then type any command, bash won't echo it back. This also will happen if you
do a "man" and quit.
So is this setting still recommanded? Or this is a problem?
Thanks,
Best regards,
Guansong
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Another bash problem?
2000-05-31 21:22 Another bash problem? Guansong Zhang
@ 2000-05-31 21:40 ` Chris Faylor
2000-05-31 22:01 ` Guansong Zhang
2000-06-02 3:05 ` Kazuhiro Fujieda
1 sibling, 1 reply; 8+ messages in thread
From: Chris Faylor @ 2000-05-31 21:40 UTC (permalink / raw)
To: cygwin
On Thu, Jun 01, 2000 at 12:24:01AM -0700, Guansong Zhang wrote:
>I used to export CYGWIN=tty in B20.1, I forgot the exact reason.
>
>But with the latest net release, this setting has a problem.
>
>With the above setting under bash prompt type
>
>$ bash
>$ exit
>
>then type any command, bash won't echo it back. This also will happen if you
>do a "man" and quit.
>
>So is this setting still recommanded? Or this is a problem?
There are no "recommended" settings for the CYGWIN environment variable.
You can set it to do whatever you think is important.
Unfortunately, I can't duplicate your behavior here. cygcheck output
might help.
cgf
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Another bash problem?
2000-05-31 21:40 ` Chris Faylor
@ 2000-05-31 22:01 ` Guansong Zhang
2000-05-31 22:05 ` Chris Faylor
0 siblings, 1 reply; 8+ messages in thread
From: Guansong Zhang @ 2000-05-31 22:01 UTC (permalink / raw)
To: cygwin
So this IS a problem. I forget to mention, my system is windows 2000.
Guansong
----- Original Message -----
From: "Chris Faylor" <cgf@cygnus.com>
To: <cygwin@sourceware.cygnus.com>
Sent: Wednesday, May 31, 2000 9:40 PM
Subject: Re: Another bash problem?
> On Thu, Jun 01, 2000 at 12:24:01AM -0700, Guansong Zhang wrote:
> >I used to export CYGWIN=tty in B20.1, I forgot the exact reason.
> >
> >But with the latest net release, this setting has a problem.
> >
> >With the above setting under bash prompt type
> >
> >$ bash
> >$ exit
> >
> >then type any command, bash won't echo it back. This also will happen if
you
> >do a "man" and quit.
> >
> >So is this setting still recommanded? Or this is a problem?
>
> There are no "recommended" settings for the CYGWIN environment variable.
> You can set it to do whatever you think is important.
>
> Unfortunately, I can't duplicate your behavior here. cygcheck output
> might help.
>
> cgf
>
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com
>
>
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Another bash problem?
2000-05-31 22:01 ` Guansong Zhang
@ 2000-05-31 22:05 ` Chris Faylor
2000-05-31 22:19 ` Guansong Zhang
0 siblings, 1 reply; 8+ messages in thread
From: Chris Faylor @ 2000-05-31 22:05 UTC (permalink / raw)
To: cygwin
On Thu, Jun 01, 2000 at 01:02:59AM -0700, Guansong Zhang wrote:
>So this IS a problem. I forget to mention, my system is windows 2000.
So is mine. I cannot duplicate this. cygcheck -r -s -v output might help
debug the problem.
cgf
>----- Original Message -----
>From: "Chris Faylor" <cgf@cygnus.com>
>To: <cygwin@sourceware.cygnus.com>
>Sent: Wednesday, May 31, 2000 9:40 PM
>Subject: Re: Another bash problem?
>
>
>> On Thu, Jun 01, 2000 at 12:24:01AM -0700, Guansong Zhang wrote:
>> >I used to export CYGWIN=tty in B20.1, I forgot the exact reason.
>> >
>> >But with the latest net release, this setting has a problem.
>> >
>> >With the above setting under bash prompt type
>> >
>> >$ bash
>> >$ exit
>> >
>> >then type any command, bash won't echo it back. This also will happen if
>you
>> >do a "man" and quit.
>> >
>> >So is this setting still recommanded? Or this is a problem?
>>
>> There are no "recommended" settings for the CYGWIN environment variable.
>> You can set it to do whatever you think is important.
>>
>> Unfortunately, I can't duplicate your behavior here. cygcheck output
>> might help.
>>
>> cgf
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Another bash problem?
2000-05-31 22:05 ` Chris Faylor
@ 2000-05-31 22:19 ` Guansong Zhang
0 siblings, 0 replies; 8+ messages in thread
From: Guansong Zhang @ 2000-05-31 22:19 UTC (permalink / raw)
To: cygwin
Thanks a lot. attached is the check out put. By the way, does stty work in
your bash?
Thanks again.
Guansong
----- Original Message -----
From: "Chris Faylor" <cgf@cygnus.com>
To: <cygwin@sourceware.cygnus.com>
Sent: Wednesday, May 31, 2000 10:05 PM
Subject: Re: Another bash problem?
> On Thu, Jun 01, 2000 at 01:02:59AM -0700, Guansong Zhang wrote:
> >So this IS a problem. I forget to mention, my system is windows 2000.
>
> So is mine. I cannot duplicate this. cygcheck -r -s -v output might help
> debug the problem.
>
> cgf
>
> >----- Original Message -----
> >From: "Chris Faylor" <cgf@cygnus.com>
> >To: <cygwin@sourceware.cygnus.com>
> >Sent: Wednesday, May 31, 2000 9:40 PM
> >Subject: Re: Another bash problem?
> >
> >
> >> On Thu, Jun 01, 2000 at 12:24:01AM -0700, Guansong Zhang wrote:
> >> >I used to export CYGWIN=tty in B20.1, I forgot the exact reason.
> >> >
> >> >But with the latest net release, this setting has a problem.
> >> >
> >> >With the above setting under bash prompt type
> >> >
> >> >$ bash
> >> >$ exit
> >> >
> >> >then type any command, bash won't echo it back. This also will happen
if
> >you
> >> >do a "man" and quit.
> >> >
> >> >So is this setting still recommanded? Or this is a problem?
> >>
> >> There are no "recommended" settings for the CYGWIN environment
variable.
> >> You can set it to do whatever you think is important.
> >>
> >> Unfortunately, I can't duplicate your behavior here. cygcheck output
> >> might help.
> >>
> >> cgf
>
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com
>
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Another bash problem?
2000-05-31 21:22 Another bash problem? Guansong Zhang
2000-05-31 21:40 ` Chris Faylor
@ 2000-06-02 3:05 ` Kazuhiro Fujieda
1 sibling, 0 replies; 8+ messages in thread
From: Kazuhiro Fujieda @ 2000-06-02 3:05 UTC (permalink / raw)
To: cygwin
>>> On Thu, 1 Jun 2000 00:24:01 -0700
>>> "Guansong Zhang" <guansong@hotmail.com> said:
> I used to export CYGWIN=tty in B20.1, I forgot the exact reason.
> But with the latest net release, this setting has a problem.
> With the above setting under bash prompt type
>
> $ bash
> $ exit
>
> then type any command, bash won't echo it back. This also will happen if you
> do a "man" and quit.
You probably set the CYGWIN variable in .bashrc. This setting
certainly causes such problem. You should set this variable in
the system environment.
There is a more detailed explanation about setting this variable
in the message
< 1DB8BA4BAC88D3118B2300508B5A552CD92546@mail.fitlinxx.com >
from David Bolen.
____
| AIST Kazuhiro Fujieda <fujieda@jaist.ac.jp>
| HOKURIKU School of Information Science
o_/ 1990 Japan Advanced Institute of Science and Technology
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Another bash problem?
@ 2000-06-01 6:14 Earnie Boyd
0 siblings, 0 replies; 8+ messages in thread
From: Earnie Boyd @ 2000-06-01 6:14 UTC (permalink / raw)
To: Guansong Zhang, cygwin
--- Guansong Zhang <guansong@hotmail.com> wrote:
-8<-
>
> HKEY_CURRENT_USER\Software\Cygnus Solutions
> HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin
> HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2
> (default) = `/cygdrive'
> cygdrive flags = 0x00000020
> HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/
> (default) = `e:\cygwin'
> flags = 0x00000002
> HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/packages
> (default) = `e:\packages'
> flags = 0x00000002
> HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/usr/bin
> (default) = `e:\cygwin\bin'
> flags = 0x00000002
> HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/usr/lib
> (default) = `e:\cygwin\lib'
> flags = 0x00000002
*****************************
* > HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\bin
* > (default) = `/usr/bin'
* > flags = 0x00000002
*****************************
Use regedit and delete this entry from the registry entries.
-8<-
>
> e:\cygwin\bin /usr/bin user binmode
> e:\cygwin\lib /usr/lib user binmode
> e:\packages /packages user binmode
> e:\cygwin / user binmode
*****************************
* > \usr\bin bin user binmode
*****************************
It's causing this strange mount point.
You could also try `umount bin' to see if that works but if it doesn't get rid
of this entry the regedit is the only way.
Cheers,
=====
---
Earnie Boyd: < mailto:earnie_boyd@yahoo.com >
__Cygwin: POSIX on Windows__
Cygwin Newbies: < http://www.freeyellow.com/members5/gw32/index.html >
__Minimalist GNU for Windows__
Mingw32 List: < http://www.egroups.com/group/mingw32/ >
Mingw Home: < http://www.mingw.org/ >
__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: Another bash problem?
@ 2000-06-01 10:21 Earnie Boyd
0 siblings, 0 replies; 8+ messages in thread
From: Earnie Boyd @ 2000-06-01 10:21 UTC (permalink / raw)
To: Guansong Zhang; +Cc: cygwin users
--- Guansong Zhang <guansong@hotmail.com> wrote:
> I happen to use this mount to have a /bin/sh. So I should to create a
> symbolic link instead.
>
No. /bin/sh already exists with the new format.
Regards,
=====
---
Earnie Boyd: < mailto:earnie_boyd@yahoo.com >
__Cygwin: POSIX on Windows__
Cygwin Newbies: < http://www.freeyellow.com/members5/gw32/index.html >
__Minimalist GNU for Windows__
Mingw32 List: < http://www.egroups.com/group/mingw32/ >
Mingw Home: < http://www.mingw.org/ >
__________________________________________________
Do You Yahoo!?
Send instant messages & get email alerts with Yahoo! Messenger.
http://im.yahoo.com/
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2000-06-02 3:05 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2000-05-31 21:22 Another bash problem? Guansong Zhang
2000-05-31 21:40 ` Chris Faylor
2000-05-31 22:01 ` Guansong Zhang
2000-05-31 22:05 ` Chris Faylor
2000-05-31 22:19 ` Guansong Zhang
2000-06-02 3:05 ` Kazuhiro Fujieda
2000-06-01 6:14 Earnie Boyd
2000-06-01 10:21 Earnie Boyd
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).