Re: problem in telnet session

Re: problem in telnet session

[Rui-Tao Dong]

>>>>> "Corinna" == Corinna Vinschen <cygwin@c...> writes:


 Corinna> You don't have to recompile it. Just start setup.exe again
 Corinna> and download inetutils-1.3.2-11 which should have arrived on
 Corinna> the mirrors. Don't forget to stop the inetd service before
 Corinna> starting setup.exe.

I downloaded inetutils-1.3.2-11 from a mirror.  (I can't get any file
from ftp://www.cygwin.com/pub/cygwin .  It is on purpose or a
mis-config?)  However, when I 

# net stop inetd

replaced inetd and then

# net start inetd

a dos window pops up.  If I kill the window, inetd dies.  Anything
wrong with my setup? cygcheck results attached below.

My current work around (for inetutils-1.3.2-10) is to telnet in and
use runemacs to start XEmacs (console-type 'x) and call up sshd from
XEmacs. 

All sessions started by ssh is OK as far as stdout goes.

I tried to use run to start sshd w/o any success.

-- 

Regards,

			Rui-Tao (x31679)

DONG ~ 3> cygcheck -v -s -r

Cygnus Win95/NT Configuration Diagnostics
Current System Time: Wed Mar 14 10:18:32 2001

WinNT Ver 4.0 build 1381 Service Pack 4

Path:	.
	/home/rdong/bin
	/usr/local/bin
	/usr/openwin/bin
	/usr/X11R6/bin
	/usr/bin
	/bin
	.
	/home/rdong/bin
	/usr/local/bin
	/usr/openwin/bin
	/usr/X11R6/bin
	/usr/bin
	/bin
	.
	/home/rdong/bin
	/usr/local/bin
	/usr/openwin/bin
	/usr/X11R6/bin
	/usr/bin
	/usr/bin
	/C/WINNT/system32
	/C/WINNT
	/C/WINNT/System32/WBEM
	/C/PROGRA~1/IBM/CLIENT~1
	/C/PROGRA~1/IBM/CLIENT~1/Shared
	/C/PROGRA~1/IBM/CLIENT~1/Emulator
	.
	/C/PROGRA~1/MICROS~2/Common/MSDev98/Bin
	/C/pub/Halcon/bin/i586-nt4
	/C/pub/Halcon/FLEXlm/i586-nt4

SysDir: C:\WINNT\System32
WinDir: C:\WINNT

PWD = `/home/rdong'
USER = `dong'
LD_LIBRARY_PATH = `/usr/local/lib/'
HOME = `/home/rdong'

TERM = `emacs'
TERMCAP = `emacs:co#80:tc=unknown:'
EMACS = `t'
INETD_DUMMY = `xxx'
XUSERFILESEARCHPATH = `/usr/local/lib/X11/app-defaults/%N:/usr/local/lib/X11/app-defaults/%N%C'
VENDOR = `intel'
USERPROFILE = `C:\WINNT\Profiles\SMSCliSvcAcct&'
USERNAME = `Dong'
USERDOMAIN = `DONG'
TZ = `PST8PDT7,M4.1.0/2,M10.5.0/2'
SYSTEMROOT = `C:\WINNT'
SYSTEMDRIVE = `C:'
SOCKS_SERVER = `localhost'
SOCKS5_FAKEALLHOSTS = `true'
SMS_LOCAL_DIR = `C:\WINNT'
SHLVL = `1'
SHELL = `/bin/tcsh'
PULSARVCF = `j:\Matrox-Full\drivers\pulsar\vcf'
PULSARRES = `j:\Matrox-Full\drivers\pulsar\res'
PULSARDCF = `j:\Matrox-Full\drivers\pulsar\dcf'
PROCESSOR_REVISION = `0803'
PROCESSOR_LEVEL = `6'
PROCESSOR_IDENTIFIER = `x86 Family 6 Model 8 Stepping 3, GenuineIntel'
PROCESSOR_ARCHITECTURE = `x86'
OSTYPE = `posix'
OS = `Windows_NT'
OS2LIBPATH = `C:\WINNT\system32\os2\dll;'
ORIONDCF = `j:\Matrox-Full\drivers\orion\dcf'
OPENWINHOME = `/usr/openwin'
NUMBER_OF_PROCESSORS = `1'
MOZILLA_NO_ASYNC_DNS = `True'
MACHTYPE = `i386'
LSDEFAULTDIR = `C:\WINNT\System32\'
LOGONSERVER = `\\DONG'
LOGNAME = `dong'
LM_LICENSE_FILE = `7166@irvserv3'
LINEMODE = `real'
HOSTTYPE = `i386'
HOST = `DONG'
HOMEPATH = `\'
HOMEDRIVE = `C:'
HALCONROOT = `c:\pub\Halcon'
HALCONIMAGES = `c:\pub\Halcon\images;D:\images'
GROUP = `None'
EMACS_DIR = `C:/cygwin/usr/local'
DISPLAY = `Phantom-Slow.newport.com:0.0'
CORONAVCF = `j:\Matrox-Full\drivers\corona\vcf'
CORONARES = `j:\Matrox-Full\drivers\corona\res'
CORONADCF = `j:\Matrox-Full\drivers\corona\dcf'
COMSPEC = `C:\WINNT\system32\cmd.exe'
COMPUTERNAME = `DONG'
COMPPATH = `C:\PROGRA~1\MICROS~2\VC98'
MAIL = `/var/spool/mail/dong'
SSH_CLIENT = `192.168.183.20 1022 22'
SSH_TTY = `/dev/tty2'

HKEY_CURRENT_USER\Software\Cygnus Solutions
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2
  (default) = `/cygdrive'
  cygdrive flags = 0x00000020
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\Program Options
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/
  (default) = `C:\cygwin'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/C
  (default) = `C:'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/dev/cdrom
  (default) = `\\.\D:'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/dev/floppy
  (default) = `\\.\A:'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/dev/floppy1
  (default) = `\\.\B:'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/home/rdong
  (default) = `I:'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/J
  (default) = `J:'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/mnt/cdrom
  (default) = `D:'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/mnt/floppy
  (default) = `A:'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/mnt/floppy1
  (default) = `B:'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/PCS
  (default) = `J:\PCS'
  flags = 0x00000008
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/bin
  (default) = `C:\cygwin\bin'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/lib
  (default) = `C:\cygwin\lib'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/local/images
  (default) = `J:\images'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/local/msvc
  (default) = `C:\Program Files\Microsoft Visual Studio'
  flags = 0x00000008
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/local/WIP
  (default) = `J:\WIP'
  flags = 0x0000000a
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Program Options

a:  fd           N/A    N/A                    
b:  fd           N/A    N/A                    
c:  hd  NTFS    8675Mb  53% CP CS UN PA FC     
d:  cd  CDFS     384Mb 100%    CS              MIL Lite 6.01
e:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61
f:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61
g:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61
h:  net NTFS   100099Mb  57% CP CS UN PA FC     
i:  net NTFS    2380Mb  59%          PA        rdong
j:  net NTFS    6840Mb  95%          PA        samba
m:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61
n:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61
s:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61
w:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61

C:\Program Files\Microsoft Visual Studio  /usr/local/msvc  system  textmode
C:\cygwin\bin  /usr/bin  system  binmode
C:\cygwin\lib  /usr/lib  system  binmode
C:\cygwin  /        system  binmode
J:\images  /usr/local/images  system  binmode
J:\PCS  /PCS     system  textmode
J:\WIP  /usr/local/WIP  system  binmode
\\.\A:  /dev/floppy  system  binmode
\\.\B:  /dev/floppy1  system  binmode
\\.\D:  /dev/cdrom  system  binmode
A:    /mnt/floppy  system  binmode
B:    /mnt/floppy1  system  binmode
C:    /C       system  binmode
D:    /mnt/cdrom  system  binmode
I:    /home/rdong  system  binmode
J:    /J       system  binmode

Found: C:\cygwin\bin\bash.exe
Found: C:\cygwin\bin\cat.exe
Found: C:\cygwin\bin\cpp.exe
Found: C:\cygwin\bin\find.exe
Found: C:\cygwin\bin\gcc.exe
Found: C:\cygwin\bin\gdb.exe
Found: C:\cygwin\bin\ld.exe
Found: C:\cygwin\bin\ls.exe
Found: C:\cygwin\bin\make.exe
Found: C:\cygwin\bin\sh.exe

  168k 2001/02/12 C:\cygwin\usr\local\bin\cyggdk.dll - os=4.0 img=1.0 sys=4.0
                  "cyggdk.dll" v0.0 ts=2001/2/11 21:39
  116k 2001/02/12 C:\cygwin\usr\local\bin\cyggdk_imlib.dll - os=4.0 img=1.0 sys=4.0
                  "cyggdk_imlib.dll" v0.0 ts=2001/2/12 2:07
  108k 2001/02/12 C:\cygwin\usr\local\bin\cygglib.dll - os=4.0 img=1.0 sys=4.0
                  "cygglib.dll" v0.0 ts=2001/2/11 21:25
    8k 2001/02/12 C:\cygwin\usr\local\bin\cyggmodule.dll - os=4.0 img=1.0 sys=4.0
                  "cyggmodule.dll" v0.0 ts=2001/2/11 21:25
    5k 2001/02/12 C:\cygwin\usr\local\bin\cyggthread.dll - os=4.0 img=1.0 sys=4.0
                  "cyggthread.dll" v0.0 ts=2001/2/11 21:27
 1045k 2001/02/12 C:\cygwin\usr\local\bin\cyggtk.dll - os=4.0 img=1.0 sys=4.0
                  "cyggtk.dll" v0.0 ts=2001/2/11 21:51
  316k 2001/02/12 C:\cygwin\usr\local\bin\cyggtkxmhtml.dll - os=4.0 img=1.0 sys=4.0
                  "cyggtkxmhtml.dll" v0.0 ts=2001/2/12 0:07
    7k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-bmp.dll - os=4.0 img=1.0 sys=4.0
                  "cygimlib-bmp.dll" v0.0 ts=2001/2/12 2:08
    7k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-jpeg.dll - os=4.0 img=1.0 sys=4.0
                  "cygimlib-jpeg.dll" v0.0 ts=2001/2/12 2:08
   10k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-png.dll - os=4.0 img=1.0 sys=4.0
                  "cygimlib-png.dll" v0.0 ts=2001/2/12 2:09
    8k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-ppm.dll - os=4.0 img=1.0 sys=4.0
                  "cygimlib-ppm.dll" v0.0 ts=2001/2/12 2:08
    7k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-ps.dll - os=4.0 img=1.0 sys=4.0
                  "cygimlib-ps.dll" v0.0 ts=2001/2/12 2:08
    6k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-tiff.dll - os=4.0 img=1.0 sys=4.0
                  "cygimlib-tiff.dll" v0.0 ts=2001/2/12 2:08
   10k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-xpm.dll - os=4.0 img=1.0 sys=4.0
                  "cygimlib-xpm.dll" v0.0 ts=2001/2/12 2:08
  145k 2001/02/12 C:\cygwin\usr\local\bin\cygImlib.dll - os=4.0 img=1.0 sys=4.0
                  "cygImlib.dll" v0.0 ts=2001/2/12 2:40
   56k 2000/12/03 C:\cygwin\bin\cygbz21.0.dll - os=4.0 img=1.0 sys=4.0
                  "cygbz21.0.dll" v0.0 ts=2000/11/20 15:53
   82k 2001/01/21 C:\cygwin\bin\cygform5.dll - os=4.0 img=1.0 sys=4.0
                  "cygform5.dll" v0.0 ts=2001/1/21 12:39
   18k 2000/10/23 C:\cygwin\bin\cyggdbm.dll - os=4.0 img=1.0 sys=4.0
                  "cyggdbm.dll" v0.0 ts=2000/10/22 19:26
   17k 2001/01/07 C:\cygwin\bin\cyghistory4.dll - os=4.0 img=1.0 sys=4.0
                  "cyghistory4.dll" v0.0 ts=2001/1/6 20:34
   14k 2000/10/23 C:\cygwin\bin\cygintl.dll - os=4.0 img=1.0 sys=4.0
                  "cygintl.dll" v0.0 ts=2000/10/23 12:02
   81k 2000/12/05 C:\cygwin\bin\cygitcl30.dll - os=4.0 img=1.0 sys=4.0
                  "cygitcl30.dll" v0.0 ts=2000/11/25 17:43
   35k 2000/12/05 C:\cygwin\bin\cygitk30.dll - os=4.0 img=1.0 sys=4.0
                  "cygitk30.dll" v0.0 ts=2000/11/25 17:43
   45k 2000/10/22 C:\cygwin\bin\cygjbig1.dll - os=4.0 img=1.0 sys=4.0
                  "cygjbig1.dll" v0.0 ts=2000/10/22 16:06
  119k 2000/10/23 C:\cygwin\bin\cygjpeg6b.dll - os=4.0 img=1.0 sys=4.0
                  "cygjpeg6b.dll" v0.0 ts=2000/10/22 17:58
   53k 2001/01/21 C:\cygwin\bin\cygmenu5.dll - os=4.0 img=1.0 sys=4.0
                  "cygmenu5.dll" v0.0 ts=2001/1/21 12:39
  414k 2001/01/21 C:\cygwin\bin\cygncurses++5.dll - os=4.0 img=1.0 sys=4.0
                  "cygncurses++5.dll" v0.0 ts=2001/1/21 12:40
  299k 2001/01/21 C:\cygwin\bin\cygncurses5.dll - os=4.0 img=1.0 sys=4.0
                  "cygncurses5.dll" v0.0 ts=2001/1/21 12:38
   34k 2001/01/21 C:\cygwin\bin\cygpanel5.dll - os=4.0 img=1.0 sys=4.0
                  "cygpanel5.dll" v0.0 ts=2001/1/21 12:38
  163k 2001/02/03 C:\cygwin\bin\cygpng2.dll - os=4.0 img=1.0 sys=4.0
                  "cygpng2.dll" v0.0 ts=2001/2/3 13:21
  108k 2001/01/07 C:\cygwin\bin\cygreadline4.dll - os=4.0 img=1.0 sys=4.0
                  "cygreadline4.dll" v0.0 ts=2001/1/6 20:34
  390k 2000/12/05 C:\cygwin\bin\cygtcl80.dll - os=4.0 img=1.0 sys=4.0
                  "cygtcl80.dll" v0.0 ts=2000/11/25 17:39
    5k 2000/12/05 C:\cygwin\bin\cygtclpip80.dll - os=4.0 img=1.0 sys=4.0
   10k 2000/12/05 C:\cygwin\bin\cygtclreg80.dll - os=4.0 img=1.0 sys=4.0
                  "cygtclreg80.dll" v0.0 ts=2000/11/25 17:39
  243k 2000/10/23 C:\cygwin\bin\cygtiff3.dll - os=4.0 img=1.0 sys=4.0
                  "cygtiff3.dll" v0.0 ts=2000/10/22 18:14
  623k 2000/12/05 C:\cygwin\bin\cygtk80.dll - os=4.0 img=1.0 sys=4.0
                  "cygtk80.dll" v0.0 ts=2000/11/25 17:43
   41k 2000/11/20 C:\cygwin\bin\cygXpm-noX4.dll - os=4.0 img=1.0 sys=4.0
                  "cygXpm-noX4.dll" v0.0 ts=2000/11/19 18:41
   45k 2000/11/20 C:\cygwin\bin\cygXpm-X4.dll - os=4.0 img=1.0 sys=4.0
                  "cygXpm-X4.dll" v0.0 ts=2000/11/19 18:45
   49k 2001/02/03 C:\cygwin\bin\cygz.dll - os=4.0 img=1.0 sys=4.0
                  "cygz.dll" v0.0 ts=2001/2/3 12:35
  615k 2001/01/31 C:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0
                  "cygwin1.dll" v0.0 ts=2001/1/31 7:08
    Cygwin DLL version info:
        dll major: 1001
        dll minor: 8
        dll epoch: 19
        dll bad signal mask: 19005
        dll old termios: 5
        dll malloc env: 28
        api major: 0
        api minor: 34
        shared data: 3
        dll identifier: cygwin1
        mount registry: 2
        cygnus registry name: Cygnus Solutions
        cygwin registry name: Cygwin
        program options name: Program Options
        cygwin mount registry name: mounts v2
        cygdrive flags: cygdrive flags
        cygdrive prefix: cygdrive prefix
        cygdrive default prefix: 
        build date: Wed Jan 31 10:08:38 EST 2001
        shared id: cygwin1S3

Use -h to see help about each section


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Michael Erdely]

It looks like your service is set to Interact with the Desktop.  You
probably want to turn that off.

I did the upgrade to the new inetutils much like you describe on three
machines and did not run into this problem, FWIW.

-ME

----- Original Message -----
From: "Rui-Tao Dong" <rdong@newport.com>
To: "Corinna Vinschen" <cygwin@cygwin.com>
Sent: Wednesday, March 14, 2001 1:20 PM
Subject: Re: problem in telnet session


>
> >>>>> "Corinna" == Corinna Vinschen <cygwin@c...> writes:
>
>
>  Corinna> You don't have to recompile it. Just start setup.exe again
>  Corinna> and download inetutils-1.3.2-11 which should have arrived on
>  Corinna> the mirrors. Don't forget to stop the inetd service before
>  Corinna> starting setup.exe.
>
> I downloaded inetutils-1.3.2-11 from a mirror.  (I can't get any file
> from ftp://www.cygwin.com/pub/cygwin .  It is on purpose or a
> mis-config?)  However, when I
>
> # net stop inetd
>
> replaced inetd and then
>
> # net start inetd
>
> a dos window pops up.  If I kill the window, inetd dies.  Anything
> wrong with my setup? cygcheck results attached below.
>
> My current work around (for inetutils-1.3.2-10) is to telnet in and
> use runemacs to start XEmacs (console-type 'x) and call up sshd from
> XEmacs.
>
> All sessions started by ssh is OK as far as stdout goes.
>
> I tried to use run to start sshd w/o any success.
>
> --
>
> Regards,
>
> Rui-Tao (x31679)
>
> DONG ~ 3> cygcheck -v -s -r
>
> Cygnus Win95/NT Configuration Diagnostics
> Current System Time: Wed Mar 14 10:18:32 2001
>
> WinNT Ver 4.0 build 1381 Service Pack 4
>
> Path: .
> /home/rdong/bin
> /usr/local/bin
> /usr/openwin/bin
> /usr/X11R6/bin
> /usr/bin
> /bin
> .
> /home/rdong/bin
> /usr/local/bin
> /usr/openwin/bin
> /usr/X11R6/bin
> /usr/bin
> /bin
> .
> /home/rdong/bin
> /usr/local/bin
> /usr/openwin/bin
> /usr/X11R6/bin
> /usr/bin
> /usr/bin
> /C/WINNT/system32
> /C/WINNT
> /C/WINNT/System32/WBEM
> /C/PROGRA~1/IBM/CLIENT~1
> /C/PROGRA~1/IBM/CLIENT~1/Shared
> /C/PROGRA~1/IBM/CLIENT~1/Emulator
> .
> /C/PROGRA~1/MICROS~2/Common/MSDev98/Bin
> /C/pub/Halcon/bin/i586-nt4
> /C/pub/Halcon/FLEXlm/i586-nt4
>
> SysDir: C:\WINNT\System32
> WinDir: C:\WINNT
>
> PWD = `/home/rdong'
> USER = `dong'
> LD_LIBRARY_PATH = `/usr/local/lib/'
> HOME = `/home/rdong'
>
> TERM = `emacs'
> TERMCAP = `emacs:co#80:tc=unknown:'
> EMACS = `t'
> INETD_DUMMY = `xxx'
> XUSERFILESEARCHPATH =
`/usr/local/lib/X11/app-defaults/%N:/usr/local/lib/X11/app-defaults/%N%C'
> VENDOR = `intel'
> USERPROFILE = `C:\WINNT\Profiles\SMSCliSvcAcct&'
> USERNAME = `Dong'
> USERDOMAIN = `DONG'
> TZ = `PST8PDT7,M4.1.0/2,M10.5.0/2'
> SYSTEMROOT = `C:\WINNT'
> SYSTEMDRIVE = `C:'
> SOCKS_SERVER = `localhost'
> SOCKS5_FAKEALLHOSTS = `true'
> SMS_LOCAL_DIR = `C:\WINNT'
> SHLVL = `1'
> SHELL = `/bin/tcsh'
> PULSARVCF = `j:\Matrox-Full\drivers\pulsar\vcf'
> PULSARRES = `j:\Matrox-Full\drivers\pulsar\res'
> PULSARDCF = `j:\Matrox-Full\drivers\pulsar\dcf'
> PROCESSOR_REVISION = `0803'
> PROCESSOR_LEVEL = `6'
> PROCESSOR_IDENTIFIER = `x86 Family 6 Model 8 Stepping 3, GenuineIntel'
> PROCESSOR_ARCHITECTURE = `x86'
> OSTYPE = `posix'
> OS = `Windows_NT'
> OS2LIBPATH = `C:\WINNT\system32\os2\dll;'
> ORIONDCF = `j:\Matrox-Full\drivers\orion\dcf'
> OPENWINHOME = `/usr/openwin'
> NUMBER_OF_PROCESSORS = `1'
> MOZILLA_NO_ASYNC_DNS = `True'
> MACHTYPE = `i386'
> LSDEFAULTDIR = `C:\WINNT\System32\'
> LOGONSERVER = `\\DONG'
> LOGNAME = `dong'
> LM_LICENSE_FILE = `7166@irvserv3'
> LINEMODE = `real'
> HOSTTYPE = `i386'
> HOST = `DONG'
> HOMEPATH = `\'
> HOMEDRIVE = `C:'
> HALCONROOT = `c:\pub\Halcon'
> HALCONIMAGES = `c:\pub\Halcon\images;D:\images'
> GROUP = `None'
> EMACS_DIR = `C:/cygwin/usr/local'
> DISPLAY = `Phantom-Slow.newport.com:0.0'
> CORONAVCF = `j:\Matrox-Full\drivers\corona\vcf'
> CORONARES = `j:\Matrox-Full\drivers\corona\res'
> CORONADCF = `j:\Matrox-Full\drivers\corona\dcf'
> COMSPEC = `C:\WINNT\system32\cmd.exe'
> COMPUTERNAME = `DONG'
> COMPPATH = `C:\PROGRA~1\MICROS~2\VC98'
> MAIL = `/var/spool/mail/dong'
> SSH_CLIENT = `192.168.183.20 1022 22'
> SSH_TTY = `/dev/tty2'
>
> HKEY_CURRENT_USER\Software\Cygnus Solutions
> HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin
> HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2
>   (default) = `/cygdrive'
>   cygdrive flags = 0x00000020
> HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\Program Options
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/
>   (default) = `C:\cygwin'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/C
>   (default) = `C:'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/dev/cdrom
>   (default) = `\\.\D:'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/dev/floppy
>   (default) = `\\.\A:'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/dev/floppy1
>   (default) = `\\.\B:'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/home/rdong
>   (default) = `I:'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/J
>   (default) = `J:'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/mnt/cdrom
>   (default) = `D:'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/mnt/floppy
>   (default) = `A:'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/mnt/floppy1
>   (default) = `B:'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/PCS
>   (default) = `J:\PCS'
>   flags = 0x00000008
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/bin
>   (default) = `C:\cygwin\bin'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2\/usr/lib
>   (default) = `C:\cygwin\lib'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts
v2\/usr/local/images
>   (default) = `J:\images'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts
v2\/usr/local/msvc
>   (default) = `C:\Program Files\Microsoft Visual Studio'
>   flags = 0x00000008
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts
v2\/usr/local/WIP
>   (default) = `J:\WIP'
>   flags = 0x0000000a
> HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Program Options
>
> a:  fd           N/A    N/A
> b:  fd           N/A    N/A
> c:  hd  NTFS    8675Mb  53% CP CS UN PA FC
> d:  cd  CDFS     384Mb 100%    CS              MIL Lite 6.01
> e:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61
> f:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61
> g:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61
> h:  net NTFS   100099Mb  57% CP CS UN PA FC
> i:  net NTFS    2380Mb  59%          PA        rdong
> j:  net NTFS    6840Mb  95%          PA        samba
> m:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61
> n:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61
> s:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61
> w:  net NTFS   173568Mb  66% CP CS UN PA FC     SAND61
>
> C:\Program Files\Microsoft Visual Studio  /usr/local/msvc  system
textmode
> C:\cygwin\bin  /usr/bin  system  binmode
> C:\cygwin\lib  /usr/lib  system  binmode
> C:\cygwin  /        system  binmode
> J:\images  /usr/local/images  system  binmode
> J:\PCS  /PCS     system  textmode
> J:\WIP  /usr/local/WIP  system  binmode
> \\.\A:  /dev/floppy  system  binmode
> \\.\B:  /dev/floppy1  system  binmode
> \\.\D:  /dev/cdrom  system  binmode
> A:    /mnt/floppy  system  binmode
> B:    /mnt/floppy1  system  binmode
> C:    /C       system  binmode
> D:    /mnt/cdrom  system  binmode
> I:    /home/rdong  system  binmode
> J:    /J       system  binmode
>
> Found: C:\cygwin\bin\bash.exe
> Found: C:\cygwin\bin\cat.exe
> Found: C:\cygwin\bin\cpp.exe
> Found: C:\cygwin\bin\find.exe
> Found: C:\cygwin\bin\gcc.exe
> Found: C:\cygwin\bin\gdb.exe
> Found: C:\cygwin\bin\ld.exe
> Found: C:\cygwin\bin\ls.exe
> Found: C:\cygwin\bin\make.exe
> Found: C:\cygwin\bin\sh.exe
>
>   168k 2001/02/12 C:\cygwin\usr\local\bin\cyggdk.dll - os=4.0 img=1.0
sys=4.0
>                   "cyggdk.dll" v0.0 ts=2001/2/11 21:39
>   116k 2001/02/12 C:\cygwin\usr\local\bin\cyggdk_imlib.dll - os=4.0
img=1.0 sys=4.0
>                   "cyggdk_imlib.dll" v0.0 ts=2001/2/12 2:07
>   108k 2001/02/12 C:\cygwin\usr\local\bin\cygglib.dll - os=4.0 img=1.0
sys=4.0
>                   "cygglib.dll" v0.0 ts=2001/2/11 21:25
>     8k 2001/02/12 C:\cygwin\usr\local\bin\cyggmodule.dll - os=4.0 img=1.0
sys=4.0
>                   "cyggmodule.dll" v0.0 ts=2001/2/11 21:25
>     5k 2001/02/12 C:\cygwin\usr\local\bin\cyggthread.dll - os=4.0 img=1.0
sys=4.0
>                   "cyggthread.dll" v0.0 ts=2001/2/11 21:27
>  1045k 2001/02/12 C:\cygwin\usr\local\bin\cyggtk.dll - os=4.0 img=1.0
sys=4.0
>                   "cyggtk.dll" v0.0 ts=2001/2/11 21:51
>   316k 2001/02/12 C:\cygwin\usr\local\bin\cyggtkxmhtml.dll - os=4.0
img=1.0 sys=4.0
>                   "cyggtkxmhtml.dll" v0.0 ts=2001/2/12 0:07
>     7k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-bmp.dll - os=4.0
img=1.0 sys=4.0
>                   "cygimlib-bmp.dll" v0.0 ts=2001/2/12 2:08
>     7k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-jpeg.dll - os=4.0
img=1.0 sys=4.0
>                   "cygimlib-jpeg.dll" v0.0 ts=2001/2/12 2:08
>    10k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-png.dll - os=4.0
img=1.0 sys=4.0
>                   "cygimlib-png.dll" v0.0 ts=2001/2/12 2:09
>     8k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-ppm.dll - os=4.0
img=1.0 sys=4.0
>                   "cygimlib-ppm.dll" v0.0 ts=2001/2/12 2:08
>     7k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-ps.dll - os=4.0 img=1.0
sys=4.0
>                   "cygimlib-ps.dll" v0.0 ts=2001/2/12 2:08
>     6k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-tiff.dll - os=4.0
img=1.0 sys=4.0
>                   "cygimlib-tiff.dll" v0.0 ts=2001/2/12 2:08
>    10k 2001/02/12 C:\cygwin\usr\local\bin\cygimlib-xpm.dll - os=4.0
img=1.0 sys=4.0
>                   "cygimlib-xpm.dll" v0.0 ts=2001/2/12 2:08
>   145k 2001/02/12 C:\cygwin\usr\local\bin\cygImlib.dll - os=4.0 img=1.0
sys=4.0
>                   "cygImlib.dll" v0.0 ts=2001/2/12 2:40
>    56k 2000/12/03 C:\cygwin\bin\cygbz21.0.dll - os=4.0 img=1.0 sys=4.0
>                   "cygbz21.0.dll" v0.0 ts=2000/11/20 15:53
>    82k 2001/01/21 C:\cygwin\bin\cygform5.dll - os=4.0 img=1.0 sys=4.0
>                   "cygform5.dll" v0.0 ts=2001/1/21 12:39
>    18k 2000/10/23 C:\cygwin\bin\cyggdbm.dll - os=4.0 img=1.0 sys=4.0
>                   "cyggdbm.dll" v0.0 ts=2000/10/22 19:26
>    17k 2001/01/07 C:\cygwin\bin\cyghistory4.dll - os=4.0 img=1.0 sys=4.0
>                   "cyghistory4.dll" v0.0 ts=2001/1/6 20:34
>    14k 2000/10/23 C:\cygwin\bin\cygintl.dll - os=4.0 img=1.0 sys=4.0
>                   "cygintl.dll" v0.0 ts=2000/10/23 12:02
>    81k 2000/12/05 C:\cygwin\bin\cygitcl30.dll - os=4.0 img=1.0 sys=4.0
>                   "cygitcl30.dll" v0.0 ts=2000/11/25 17:43
>    35k 2000/12/05 C:\cygwin\bin\cygitk30.dll - os=4.0 img=1.0 sys=4.0
>                   "cygitk30.dll" v0.0 ts=2000/11/25 17:43
>    45k 2000/10/22 C:\cygwin\bin\cygjbig1.dll - os=4.0 img=1.0 sys=4.0
>                   "cygjbig1.dll" v0.0 ts=2000/10/22 16:06
>   119k 2000/10/23 C:\cygwin\bin\cygjpeg6b.dll - os=4.0 img=1.0 sys=4.0
>                   "cygjpeg6b.dll" v0.0 ts=2000/10/22 17:58
>    53k 2001/01/21 C:\cygwin\bin\cygmenu5.dll - os=4.0 img=1.0 sys=4.0
>                   "cygmenu5.dll" v0.0 ts=2001/1/21 12:39
>   414k 2001/01/21 C:\cygwin\bin\cygncurses++5.dll - os=4.0 img=1.0 sys=4.0
>                   "cygncurses++5.dll" v0.0 ts=2001/1/21 12:40
>   299k 2001/01/21 C:\cygwin\bin\cygncurses5.dll - os=4.0 img=1.0 sys=4.0
>                   "cygncurses5.dll" v0.0 ts=2001/1/21 12:38
>    34k 2001/01/21 C:\cygwin\bin\cygpanel5.dll - os=4.0 img=1.0 sys=4.0
>                   "cygpanel5.dll" v0.0 ts=2001/1/21 12:38
>   163k 2001/02/03 C:\cygwin\bin\cygpng2.dll - os=4.0 img=1.0 sys=4.0
>                   "cygpng2.dll" v0.0 ts=2001/2/3 13:21
>   108k 2001/01/07 C:\cygwin\bin\cygreadline4.dll - os=4.0 img=1.0 sys=4.0
>                   "cygreadline4.dll" v0.0 ts=2001/1/6 20:34
>   390k 2000/12/05 C:\cygwin\bin\cygtcl80.dll - os=4.0 img=1.0 sys=4.0
>                   "cygtcl80.dll" v0.0 ts=2000/11/25 17:39
>     5k 2000/12/05 C:\cygwin\bin\cygtclpip80.dll - os=4.0 img=1.0 sys=4.0
>    10k 2000/12/05 C:\cygwin\bin\cygtclreg80.dll - os=4.0 img=1.0 sys=4.0
>                   "cygtclreg80.dll" v0.0 ts=2000/11/25 17:39
>   243k 2000/10/23 C:\cygwin\bin\cygtiff3.dll - os=4.0 img=1.0 sys=4.0
>                   "cygtiff3.dll" v0.0 ts=2000/10/22 18:14
>   623k 2000/12/05 C:\cygwin\bin\cygtk80.dll - os=4.0 img=1.0 sys=4.0
>                   "cygtk80.dll" v0.0 ts=2000/11/25 17:43
>    41k 2000/11/20 C:\cygwin\bin\cygXpm-noX4.dll - os=4.0 img=1.0 sys=4.0
>                   "cygXpm-noX4.dll" v0.0 ts=2000/11/19 18:41
>    45k 2000/11/20 C:\cygwin\bin\cygXpm-X4.dll - os=4.0 img=1.0 sys=4.0
>                   "cygXpm-X4.dll" v0.0 ts=2000/11/19 18:45
>    49k 2001/02/03 C:\cygwin\bin\cygz.dll - os=4.0 img=1.0 sys=4.0
>                   "cygz.dll" v0.0 ts=2001/2/3 12:35
>   615k 2001/01/31 C:\cygwin\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0
>                   "cygwin1.dll" v0.0 ts=2001/1/31 7:08
>     Cygwin DLL version info:
>         dll major: 1001
>         dll minor: 8
>         dll epoch: 19
>         dll bad signal mask: 19005
>         dll old termios: 5
>         dll malloc env: 28
>         api major: 0
>         api minor: 34
>         shared data: 3
>         dll identifier: cygwin1
>         mount registry: 2
>         cygnus registry name: Cygnus Solutions
>         cygwin registry name: Cygwin
>         program options name: Program Options
>         cygwin mount registry name: mounts v2
>         cygdrive flags: cygdrive flags
>         cygdrive prefix: cygdrive prefix
>         cygdrive default prefix:
>         build date: Wed Jan 31 10:08:38 EST 2001
>         shared id: cygwin1S3
>
> Use -h to see help about each section
>
>
> --
> Want to unsubscribe from this list?
> Check out: http://cygwin.com/ml/#unsubscribe-simple
>
>


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Corinna Vinschen]

On Wed, Mar 14, 2001 at 10:20:08AM -0800, Rui-Tao Dong wrote:
> 
> >>>>> "Corinna" == Corinna Vinschen <cygwin@c...> writes:
> 
> 
>  Corinna> You don't have to recompile it. Just start setup.exe again
>  Corinna> and download inetutils-1.3.2-11 which should have arrived on
>  Corinna> the mirrors. Don't forget to stop the inetd service before
>  Corinna> starting setup.exe.
> 
> I downloaded inetutils-1.3.2-11 from a mirror.  (I can't get any file
> from ftp://www.cygwin.com/pub/cygwin .  It is on purpose or a
> mis-config?)  However, when I 

It's purpose. Use mirrors to download the Cygwin stuff.

> # net stop inetd
> 
> replaced inetd and then
> 
> # net start inetd
> 
> a dos window pops up.  If I kill the window, inetd dies.  Anything
> wrong with my setup? cygcheck results attached below.

Did you check the "Allow service to interact with desktop" setting
in the service control panel as Egor suggested yesterday just for
testing purposes? Uncheck it.

Corinna

-- 
Corinna Vinschen                  Please, send mails regarding Cygwin to
Cygwin Developer                                mailto:cygwin@cygwin.com
Red Hat, Inc.

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Christopher Faylor]

On Wed, Mar 14, 2001 at 10:20:08AM -0800, Rui-Tao Dong wrote:
>I downloaded inetutils-1.3.2-11 from a mirror.  (I can't get any file
>from ftp://www.cygwin.com/pub/cygwin .  It is on purpose or a
>mis-config?)

Please double-click on the .message file at
ftp://www.cygwin.com/pub/cygwin/.message .  This will answer your
question.

cgf

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Rui-Tao Dong]

>>>>> "Corinna" == Corinna Vinschen <cygwin@c...> writes:

 Corinna> On Wed, Mar 14, 2001 at 10:20:08AM -0800, Rui-Tao Dong
 Corinna> wrote:


 >> # net stop inetd
 >> 
 >> replaced inetd and then
 >> 
 >> # net start inetd
 >> 
 >> a dos window pops up.  If I kill the window, inetd dies.  Anything
 >> wrong with my setup? cygcheck results attached below.

 Corinna> Did you check the "Allow service to interact with desktop"
 Corinna> setting in the service control panel as Egor suggested
 Corinna> yesterday just for testing purposes? Uncheck it.

Well, I have a strange setting.  I want to interact with the desktop.
I am sitting in front of an NT box and using vncviewer to connect to
Xvnc running on a Linux machine.  The nice thing about this setting is
that if the NT box crashes (which happens every a couple of hours when
I am playing with vision hardwares), it doesn't kill my XEmacs along
with other stuff.

I use M-x remote-compile to compile programs.  (Basically 
ssh NTBOX "cd $PWD; exec nmake -k" ) 

I want to get stdout (stderr if it applies) into my XEmacs buffer and
still see standard window's popup (some error messages insist to pop
up.)

I was thinking that if I could get 

  start.dwFlags = STARTF_USESHOWWINDOW;
  start.wShowWindow = SW_HIDE;

into LPSTARTUPINFO before inetd forks the first client, everything
should be OK.  However, I can't find an obvious place to insert the
code.

-- 

Regards,

			Rui-Tao (x31679)


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Corinna Vinschen]

On Wed, Mar 14, 2001 at 03:12:53PM -0800, Rui-Tao Dong wrote:
> I was thinking that if I could get 
> 
>   start.dwFlags = STARTF_USESHOWWINDOW;
>   start.wShowWindow = SW_HIDE;
> 
> into LPSTARTUPINFO before inetd forks the first client, everything
> should be OK.  However, I can't find an obvious place to insert the
> code.

You will not find that anywher in the inetd code. inetd uses fork/exec
which is in Cygwin handled by calling some dubious Windows functions
including CreateProcess. If you want to add that change to inetd you're
on your own since you would have to rewrite the call of the child
process completely by yourself. Be aware that that will heavily influence
interaction with Cygwin processes up to a full disfunctionality.

Corinna

-- 
Corinna Vinschen                  Please, send mails regarding Cygwin to
Cygwin Developer                                mailto:cygwin@cygwin.com
Red Hat, Inc.

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Rui-Tao Dong]

>>>>> "Christopher" == Christopher Faylor <cgf@r...> writes:

 Christopher> On Wed, Mar 14, 2001 at 10:20:08AM -0800, Rui-Tao Dong
 Christopher> wrote:

 Christopher> Please double-click on the .message file at
 Christopher> ftp://www.cygwin.com/pub/cygwin/.message .  This will
 Christopher> answer your question.

Wonders of efs (formerly known as ange-ftp, an XEmacs package), I
never saw the message before.

Thanks anyway.


-- 

Regards,

			Rui-Tao (x31679)


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Keith Starsmeare]

On Tue, 13 Mar 2001, Corinna Vinschen wrote:

> I'm somewhat surprised. I just checked your above program and
> it worked fine over inetd/telnet with Egor's patch. I checked both,
> with and without -mno-cygwin.

Sorry, my mistake! Egor's patch fixes the problem. Many thanks Egor!

Keith


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

RE: problem in telnet session

[Kalkoul Morad]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2050 bytes --]

Congratulations Egor.


Best regards.

Morad KALKOUL


-----Message d'origine-----
De : Egor Duda [ mailto:deo@logos-m.ru ]
Envoyé : mardi 13 mars 2001 15:32
À : Kalkoul Morad
Cc : cygwin@cygwin.com
Objet : Re: problem in telnet session


Hi!

Tuesday, 13 March, 2001 Kalkoul Morad M-Kalkoul@arte-tv.com wrote:

KM> I did it:
>>i  believe  this is due to some net.exe "feature". it seems that if it
>>runs  out  of  console  window, it creates new console and outputs 
>>everything  there.  it's  can easily seen by setting "Allow Service to
>>interact   with   desktop"   for  inetd  service. when you run in your
>>telnet  or ssh session 'net start some_big_service' you'll see console
>>window with net.exe output popping up on your desktop.

KM> but it doesn't work, have you another idea?

what  exactly  doesn't  work?  before-mentioned  procedure?
probably  i  didn't  make myself clear enough, but if you suppose that
setting  "Allow  Service to interact with desktop" will make net start
displaying  output in your telnet session then you're wrong. it won't.
the  sole  purpose  of  this  procedure  is  to _illustrate_ where the
problem   is.   To  _solve_  the  problem, you should either apply the
patch yourself or wait for updated inetutils package.

KM> the  following simple patch to inetd solved this problem for me.
Corinna,
KM> can you please consider it?

KM> --- inetd.c.orig        Tue Mar 13 16:13:31 2001
KM> +++ inetd.c     Tue Mar 13 16:10:44 2001
KM> @@ -612,8 +612,11 @@ service_main(argc, argv)
KM>         pid_t pid;
KM>         char buf[50];
KM> +
KM> +#ifdef __CYGWIN__
KM>          exception_list except_list;
KM>          cygwin_internal (CW_INIT_EXCEPTIONS, &except_list);
 
KM> -#ifdef __CYGWIN__
KM> +        AllocConsole ();
KM> +
KM>          if (is_winnt && !debug) {
KM>              openlog("inetd", LOG_PID | LOG_NOWAIT, LOG_DAEMON);

Egor.            mailto:deo@logos-m.ru ICQ 5165414 FidoNet 2:5020/496.19


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Corinna Vinschen]

On Wed, Mar 14, 2001 at 10:41:50AM +0100, Kalkoul Morad wrote:
> Hi,
> 
> like Corinna said that your patch runs, and because I'm not a big
> programmer, 
> if you can tell me everything that it hat to do update my inetd wit the
> command line to compile inetd?

You don't have to recompile it. Just start setup.exe again and
download inetutils-1.3.2-11 which should have arrived on the
mirrors. Don't forget to stop the inetd service before starting
setup.exe.

Corinna

-- 
Corinna Vinschen                  Please, send mails regarding Cygwin to
Cygwin Developer                                mailto:cygwin@cygwin.com
Red Hat, Inc.

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

RE: problem in telnet session

[Kalkoul Morad]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2204 bytes --]

Hi,

like Corinna said that your patch runs, and because I'm not a big
programmer, 
if you can tell me everything that it hat to do update my inetd wit the
command line to compile inetd?

Thans in advance
 


-----Message d'origine-----
De : Egor Duda [ mailto:deo@logos-m.ru ]
Envoyé : mardi 13 mars 2001 15:32
À : Kalkoul Morad
Cc : cygwin@cygwin.com
Objet : Re: problem in telnet session


Hi!

Tuesday, 13 March, 2001 Kalkoul Morad M-Kalkoul@arte-tv.com wrote:

KM> I did it:
>>i  believe  this is due to some net.exe "feature". it seems that if it
>>runs  out  of  console  window, it creates new console and outputs 
>>everything  there.  it's  can easily seen by setting "Allow Service to
>>interact   with   desktop"   for  inetd  service. when you run in your
>>telnet  or ssh session 'net start some_big_service' you'll see console
>>window with net.exe output popping up on your desktop.

KM> but it doesn't work, have you another idea?

what  exactly  doesn't  work?  before-mentioned  procedure?
probably  i  didn't  make myself clear enough, but if you suppose that
setting  "Allow  Service to interact with desktop" will make net start
displaying  output in your telnet session then you're wrong. it won't.
the  sole  purpose  of  this  procedure  is  to _illustrate_ where the
problem   is.   To  _solve_  the  problem, you should either apply the
patch yourself or wait for updated inetutils package.

KM> the  following simple patch to inetd solved this problem for me.
Corinna,
KM> can you please consider it?

KM> --- inetd.c.orig        Tue Mar 13 16:13:31 2001
KM> +++ inetd.c     Tue Mar 13 16:10:44 2001
KM> @@ -612,8 +612,11 @@ service_main(argc, argv)
KM>         pid_t pid;
KM>         char buf[50];
KM> +
KM> +#ifdef __CYGWIN__
KM>          exception_list except_list;
KM>          cygwin_internal (CW_INIT_EXCEPTIONS, &except_list);
 
KM> -#ifdef __CYGWIN__
KM> +        AllocConsole ();
KM> +
KM>          if (is_winnt && !debug) {
KM>              openlog("inetd", LOG_PID | LOG_NOWAIT, LOG_DAEMON);

Egor.            mailto:deo@logos-m.ru ICQ 5165414 FidoNet 2:5020/496.19


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Corinna Vinschen]

On Tue, Mar 13, 2001 at 02:49:27PM +0000, Keith Starsmeare wrote:
> On Tue, 13 Mar 2001, Corinna Vinschen wrote:
> > ??? It did work when I've just tested it. Did you in fact recompile
> > inetutils?
> 
> It works for me too, but is there another solution? One problem is that
> I'm not sitting at the desktop. Another more serious problem is that
> programs which process the output stream don't work when run through the
> inetd.
> 
> E.g. The following code when compiled with gcc --mno-cygwin (or cl)
> doesn't have any output to process when run through the inetd:
> 
>   #include <stdio.h>
> 
>   int main()
>   {
>     char psBuffer[128];
>     FILE *output;
> 
>     if ((output = _popen("nm a.exe", "r")) == NULL ) exit(1);
>     while(!feof(output))
>       if(fgets(psBuffer, 128, output) != NULL) printf(psBuffer);
>     printf("\nProcess returned %d\n", _pclose(output));
>   }
> 
> This problem is affecting a non-cygwin program that we use, so we have
> to log on locally to use this program. :(

I'm somewhat surprised. I just checked your above program and
it worked fine over inetd/telnet with Egor's patch. I checked both,
with and without -mno-cygwin.

Corinna

-- 
Corinna Vinschen                  Please, send mails regarding Cygwin to
Cygwin Developer                                mailto:cygwin@cygwin.com
Red Hat, Inc.

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Keith Starsmeare]

On Tue, 13 Mar 2001, Corinna Vinschen wrote:

> On Tue, Mar 13, 2001 at 03:03:23PM +0100, Kalkoul Morad wrote:
> > I did it:
> > >i  believe  this is due to some net.exe "feature". it seems that if it
> > >runs  out  of  console  window, it creates new console and outputs
> > >everything  there.  it's  can easily seen by setting "Allow Service to
> > >interact   with   desktop"   for  inetd  service. when you run in your
> > >telnet  or ssh session 'net start some_big_service' you'll see console
> > >window with net.exe output popping up on your desktop.
> >
> > but it doesn't work, have you another idea?
>
> ??? It did work when I've just tested it. Did you in fact recompile
> inetutils?

It works for me too, but is there another solution? One problem is that
I'm not sitting at the desktop. Another more serious problem is that
programs which process the output stream don't work when run through the
inetd.

E.g. The following code when compiled with gcc --mno-cygwin (or cl)
doesn't have any output to process when run through the inetd:

  #include <stdio.h>

  int main()
  {
    char psBuffer[128];
    FILE *output;

    if ((output = _popen("nm a.exe", "r")) == NULL ) exit(1);
    while(!feof(output))
      if(fgets(psBuffer, 128, output) != NULL) printf(psBuffer);
    printf("\nProcess returned %d\n", _pclose(output));
  }

This problem is affecting a non-cygwin program that we use, so we have
to log on locally to use this program. :(

Keith


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Egor Duda]

Hi!

Tuesday, 13 March, 2001 Kalkoul Morad M-Kalkoul@arte-tv.com wrote:

KM> I did it:
>>i  believe  this is due to some net.exe "feature". it seems that if it
>>runs  out  of  console  window, it creates new console and outputs 
>>everything  there.  it's  can easily seen by setting "Allow Service to
>>interact   with   desktop"   for  inetd  service. when you run in your
>>telnet  or ssh session 'net start some_big_service' you'll see console
>>window with net.exe output popping up on your desktop.

KM> but it doesn't work, have you another idea?

what  exactly  doesn't  work?  before-mentioned  procedure?
probably  i  didn't  make myself clear enough, but if you suppose that
setting  "Allow  Service to interact with desktop" will make net start
displaying  output in your telnet session then you're wrong. it won't.
the  sole  purpose  of  this  procedure  is  to _illustrate_ where the
problem   is.   To  _solve_  the  problem, you should either apply the
patch yourself or wait for updated inetutils package.

KM> the  following simple patch to inetd solved this problem for me. Corinna,
KM> can you please consider it?

KM> --- inetd.c.orig        Tue Mar 13 16:13:31 2001
KM> +++ inetd.c     Tue Mar 13 16:10:44 2001
KM> @@ -612,8 +612,11 @@ service_main(argc, argv)
KM>         pid_t pid;
KM>         char buf[50];
KM> +
KM> +#ifdef __CYGWIN__
KM>          exception_list except_list;
KM>          cygwin_internal (CW_INIT_EXCEPTIONS, &except_list);
 
KM> -#ifdef __CYGWIN__
KM> +        AllocConsole ();
KM> +
KM>          if (is_winnt && !debug) {
KM>              openlog("inetd", LOG_PID | LOG_NOWAIT, LOG_DAEMON);

Egor.            mailto:deo@logos-m.ru ICQ 5165414 FidoNet 2:5020/496.19



--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Corinna Vinschen]

On Tue, Mar 13, 2001 at 03:03:23PM +0100, Kalkoul Morad wrote:
> I did it:
> >i  believe  this is due to some net.exe "feature". it seems that if it
> >runs  out  of  console  window, it creates new console and outputs 
> >everything  there.  it's  can easily seen by setting "Allow Service to
> >interact   with   desktop"   for  inetd  service. when you run in your
> >telnet  or ssh session 'net start some_big_service' you'll see console
> >window with net.exe output popping up on your desktop.
> 
> but it doesn't work, have you another idea?

??? It did work when I've just tested it. Did you in fact recompile
inetutils?

Corinna

-- 
Corinna Vinschen                  Please, send mails regarding Cygwin to
Cygwin Developer                                mailto:cygwin@cygwin.com
Red Hat, Inc.

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Corinna Vinschen]

On Tue, Mar 13, 2001 at 04:16:34PM +0300, Egor Duda wrote:
> Hi!
> 
> Tuesday, 13 March, 2001 Kalkoul Morad M-Kalkoul@arte-tv.com wrote:
> 
> KM> Why when I'm in telnet session command like ipconfig displays a result, and
> KM> the command like net start displays nothing only the next prompt.
> 
> i  believe  this is due to some net.exe "feature". it seems that if it
> runs  out  of  console  window, it creates new console and outputs 
> everything  there.  it's  can easily seen by setting "Allow Service to
> interact   with   desktop"   for  inetd  service. when you run in your
> telnet  or ssh session 'net start some_big_service' you'll see console
> window with net.exe output popping up on your desktop.
> 
> the  following simple patch to inetd solved this problem for me. Corinna,
> can you please consider it?

Thanks for that patch!

I have applied it to inetutils. It works pretty good. I've just uploaded
inetutils-1.3.2-11 to sourceware.

Corinna

-- 
Corinna Vinschen                  Please, send mails regarding Cygwin to
Cygwin Developer                                mailto:cygwin@cygwin.com
Red Hat, Inc.

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

RE: problem in telnet session

[Kalkoul Morad]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 2058 bytes --]

I did it:
>i  believe  this is due to some net.exe "feature". it seems that if it
>runs  out  of  console  window, it creates new console and outputs 
>everything  there.  it's  can easily seen by setting "Allow Service to
>interact   with   desktop"   for  inetd  service. when you run in your
>telnet  or ssh session 'net start some_big_service' you'll see console
>window with net.exe output popping up on your desktop.

but it doesn't work, have you another idea?

Thanks in advance .

Best regards, Morad KALKOUL



-----Message d'origine-----
De : Egor Duda [ mailto:deo@logos-m.ru ]
Envoyé : mardi 13 mars 2001 14:17
À : Kalkoul Morad
Cc : cygwin@cygwin.com
Objet : Re: problem in telnet session


Hi!

Tuesday, 13 March, 2001 Kalkoul Morad M-Kalkoul@arte-tv.com wrote:

KM> Why when I'm in telnet session command like ipconfig displays a result,
and
KM> the command like net start displays nothing only the next prompt.

i  believe  this is due to some net.exe "feature". it seems that if it
runs  out  of  console  window, it creates new console and outputs 
everything  there.  it's  can easily seen by setting "Allow Service to
interact   with   desktop"   for  inetd  service. when you run in your
telnet  or ssh session 'net start some_big_service' you'll see console
window with net.exe output popping up on your desktop.

the  following simple patch to inetd solved this problem for me. Corinna,
can you please consider it?

--- inetd.c.orig        Tue Mar 13 16:13:31 2001
+++ inetd.c     Tue Mar 13 16:10:44 2001
@@ -612,8 +612,11 @@ service_main(argc, argv)
        pid_t pid;
        char buf[50];
+
+#ifdef __CYGWIN__
         exception_list except_list;
         cygwin_internal (CW_INIT_EXCEPTIONS, &except_list);
 
-#ifdef __CYGWIN__
+        AllocConsole ();
+
         if (is_winnt && !debug) {
             openlog("inetd", LOG_PID | LOG_NOWAIT, LOG_DAEMON);

Egor.            mailto:deo@logos-m.ru ICQ 5165414 FidoNet 2:5020/496.19


--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

Re: problem in telnet session

[Egor Duda]

Hi!

Tuesday, 13 March, 2001 Kalkoul Morad M-Kalkoul@arte-tv.com wrote:

KM> Why when I'm in telnet session command like ipconfig displays a result, and
KM> the command like net start displays nothing only the next prompt.

i  believe  this is due to some net.exe "feature". it seems that if it
runs  out  of  console  window, it creates new console and outputs 
everything  there.  it's  can easily seen by setting "Allow Service to
interact   with   desktop"   for  inetd  service. when you run in your
telnet  or ssh session 'net start some_big_service' you'll see console
window with net.exe output popping up on your desktop.

the  following simple patch to inetd solved this problem for me. Corinna,
can you please consider it?

--- inetd.c.orig        Tue Mar 13 16:13:31 2001
+++ inetd.c     Tue Mar 13 16:10:44 2001
@@ -612,8 +612,11 @@ service_main(argc, argv)
        pid_t pid;
        char buf[50];
+
+#ifdef __CYGWIN__
         exception_list except_list;
         cygwin_internal (CW_INIT_EXCEPTIONS, &except_list);
 
-#ifdef __CYGWIN__
+        AllocConsole ();
+
         if (is_winnt && !debug) {
             openlog("inetd", LOG_PID | LOG_NOWAIT, LOG_DAEMON);

Egor.            mailto:deo@logos-m.ru ICQ 5165414 FidoNet 2:5020/496.19



--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple

problem in telnet session

[Kalkoul Morad]

Hi,

Why when I'm in telnet session command like ipconfig displays a result, and
the command like net start displays nothing only the next prompt.

thanks in advance.

best regards, Morad KALKOUL.

--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple