* RE: make 3.79.1-4 'make: /bin/sh.exe: Command not found' when run ning without sh.exe
@ 2001-11-11 8:26 Craig Hackney
2001-11-11 8:26 ` Christopher Faylor
0 siblings, 1 reply; 6+ messages in thread
From: Craig Hackney @ 2001-11-11 8:26 UTC (permalink / raw)
To: 'cygwin@cygwin.com', Craig Hackney
I would, but when I try to configure the make source code I get
the following error.
$ ./configure
creating cache ./config.cache
configure: error: can not find install-sh or install.sh in . ./.. ./../..
I tried building other things from source and it works fine.
Any ideas?
Thanks,
-----Original Message-----
From: Christopher Faylor [mailto:cygwin@cygwin.com]
Sent: Friday, November 16, 2001 12:58 PM
To: Craig Hackney
Cc: cygwin@cygwin.com
Subject: Re: make 3.79.1-4 'make: /bin/sh.exe: Command not found' when
run ning without sh.exe
I was hoping that you could verify that it works for you before I make a
new release.
cgf
On Fri, Nov 16, 2001 at 12:47:52PM -0800, Craig Hackney wrote:
>
> The patch below looks good.
>
> Thanks,
>
>-----Original Message-----
>From: Christopher Faylor [mailto:cgf@redhat.com]
>Sent: Friday, November 16, 2001 12:01 PM
>To: cygwin@cygwin.com
>Cc: craig@triscend.com
>Subject: Re: make 3.79.1-4 'make: /bin/sh.exe: Command not found' when
>running without sh.exe
>
>
>Trying again, cc'ing the original sender.
>
>cgf
>
>On Thu, Nov 15, 2001 at 10:30:54PM -0500, Christopher Faylor wrote:
>>On Thu, Nov 15, 2001 at 07:00:13PM -0800, Craig Hackney wrote:
>>>
>>> There appears to be a problem with this version of make please
>>> see below.
>>
>>Thanks for the analysis.
>>
>>The patch below should fix this, right?
>>
>>cgf
>
>2001-11-15 Christopher Faylor <cgf@redhat.com>
>
> * main.c (main): Invert sense of test to ensure that unixy_shell is
>set
> to zero if MAKE_MODE is not set to UNIX.
>
>Index: main.c
>===================================================================
>RCS file: /cvs/cvsfiles/devo/make/main.c,v
>retrieving revision 1.47
>diff -u -p -r1.47 main.c
>--- main.c 2001/06/26 19:12:04 1.47
>+++ main.c 2001/11/16 03:20:03
>@@ -870,11 +870,10 @@ int main (int argc, char ** argv)
> char *make_mode_env;
>
> /* Read the environment variable MAKE_MODE */
>- /* If it's "UNIX", set unixy_shell to 1. If it's "WIN32" or
>- anything else, stay with the default of 0. */
>+ /* If it's not "UNIX", set unixy_shell to 0. */
> make_mode_env = getenv ("MAKE_MODE");
>- if (make_mode_env && strcaseequ (make_mode_env, "UNIX"))
>- unixy_shell = 1;
>+ if (make_mode_env && !strcaseequ (make_mode_env, "UNIX"))
>+ unixy_shell = 0;
> }
> #endif /* __CYGWIN__ */
>
>--
>Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
>Bug reporting: http://cygwin.com/bugs.html
>Documentation: http://cygwin.com/docs.html
>FAQ: http://cygwin.com/faq/
--
cgf@redhat.com Red Hat, Inc.
http://sources.redhat.com/ http://www.redhat.com/
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: make 3.79.1-4 'make: /bin/sh.exe: Command not found' when run ning without sh.exe
2001-11-11 8:26 ` Christopher Faylor
@ 2001-11-11 8:26 ` Christopher Faylor
0 siblings, 0 replies; 6+ messages in thread
From: Christopher Faylor @ 2001-11-11 8:26 UTC (permalink / raw)
To: cygwin; +Cc: craig
Hmm. Are you not subscribed to cygwin@cygwin.com, possibly?
cgf
On Fri, Nov 16, 2001 at 04:17:15PM -0500, Christopher Faylor wrote:
>On Fri, Nov 16, 2001 at 01:11:13PM -0800, Craig Hackney wrote:
>>
>> I would, but when I try to configure the make source code I get
>> the following error.
>>
>>$ ./configure
>>creating cache ./config.cache
>>configure: error: can not find install-sh or install.sh in . ./.. ./../..
>>
>> I tried building other things from source and it works fine.
>>
>> Any ideas?
>
>Just create an empty install-sh. As long as you're not installing you
>shouldn't need this.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: make 3.79.1-4 'make: /bin/sh.exe: Command not found' when run ning without sh.exe
2001-11-11 8:26 make 3.79.1-4 'make: /bin/sh.exe: Command not found' when run ning without sh.exe Craig Hackney
@ 2001-11-11 8:26 ` Christopher Faylor
2001-11-11 8:26 ` Christopher Faylor
0 siblings, 1 reply; 6+ messages in thread
From: Christopher Faylor @ 2001-11-11 8:26 UTC (permalink / raw)
To: cygwin
On Fri, Nov 16, 2001 at 01:11:13PM -0800, Craig Hackney wrote:
>
> I would, but when I try to configure the make source code I get
> the following error.
>
>$ ./configure
>creating cache ./config.cache
>configure: error: can not find install-sh or install.sh in . ./.. ./../..
>
> I tried building other things from source and it works fine.
>
> Any ideas?
Just create an empty install-sh. As long as you're not installing you
shouldn't need this.
cgf
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: make 3.79.1-4 'make: /bin/sh.exe: Command not found' when run ning without sh.exe
@ 2001-11-11 17:22 Craig Hackney
0 siblings, 0 replies; 6+ messages in thread
From: Craig Hackney @ 2001-11-11 17:22 UTC (permalink / raw)
To: 'cygwin@cygwin.com'; +Cc: Craig Hackney
That gets me further but I still con not finish the configure
for make. I have included the error that I am seeing below...
$ ./configure
loading cache ./config.cache
checking for a BSD compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking whether make sets ${MAKE}... yes
checking for working aclocal... found
checking for working autoconf... found
checking for working automake... found
checking for working autoheader... found
checking for working makeinfo... found
configure: error: can not run ./config.sub
-----Original Message-----
From: Christopher Faylor [mailto:cgf@redhat.com]
Sent: Saturday, November 17, 2001 1:45 PM
To: cygwin@cygwin.com
Cc: craig@triscend.com
Subject: Re: make 3.79.1-4 'make: /bin/sh.exe: Command not found' when
run ning without sh.exe
Hmm. Are you not subscribed to cygwin@cygwin.com, possibly?
cgf
On Fri, Nov 16, 2001 at 04:17:15PM -0500, Christopher Faylor wrote:
>On Fri, Nov 16, 2001 at 01:11:13PM -0800, Craig Hackney wrote:
>>
>> I would, but when I try to configure the make source code I get
>> the following error.
>>
>>$ ./configure
>>creating cache ./config.cache
>>configure: error: can not find install-sh or install.sh in . ./.. ./../..
>>
>> I tried building other things from source and it works fine.
>>
>> Any ideas?
>
>Just create an empty install-sh. As long as you're not installing you
>shouldn't need this.
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: make 3.79.1-4 'make: /bin/sh.exe: Command not found' when run ning without sh.exe
2001-11-11 8:26 Craig Hackney
@ 2001-11-11 8:26 ` Christopher Faylor
0 siblings, 0 replies; 6+ messages in thread
From: Christopher Faylor @ 2001-11-11 8:26 UTC (permalink / raw)
To: Craig Hackney; +Cc: cygwin
I was hoping that you could verify that it works for you before I make a
new release.
cgf
On Fri, Nov 16, 2001 at 12:47:52PM -0800, Craig Hackney wrote:
>
> The patch below looks good.
>
> Thanks,
>
>-----Original Message-----
>From: Christopher Faylor [mailto:cgf@redhat.com]
>Sent: Friday, November 16, 2001 12:01 PM
>To: cygwin@cygwin.com
>Cc: craig@triscend.com
>Subject: Re: make 3.79.1-4 'make: /bin/sh.exe: Command not found' when
>running without sh.exe
>
>
>Trying again, cc'ing the original sender.
>
>cgf
>
>On Thu, Nov 15, 2001 at 10:30:54PM -0500, Christopher Faylor wrote:
>>On Thu, Nov 15, 2001 at 07:00:13PM -0800, Craig Hackney wrote:
>>>
>>> There appears to be a problem with this version of make please
>>> see below.
>>
>>Thanks for the analysis.
>>
>>The patch below should fix this, right?
>>
>>cgf
>
>2001-11-15 Christopher Faylor <cgf@redhat.com>
>
> * main.c (main): Invert sense of test to ensure that unixy_shell is
>set
> to zero if MAKE_MODE is not set to UNIX.
>
>Index: main.c
>===================================================================
>RCS file: /cvs/cvsfiles/devo/make/main.c,v
>retrieving revision 1.47
>diff -u -p -r1.47 main.c
>--- main.c 2001/06/26 19:12:04 1.47
>+++ main.c 2001/11/16 03:20:03
>@@ -870,11 +870,10 @@ int main (int argc, char ** argv)
> char *make_mode_env;
>
> /* Read the environment variable MAKE_MODE */
>- /* If it's "UNIX", set unixy_shell to 1. If it's "WIN32" or
>- anything else, stay with the default of 0. */
>+ /* If it's not "UNIX", set unixy_shell to 0. */
> make_mode_env = getenv ("MAKE_MODE");
>- if (make_mode_env && strcaseequ (make_mode_env, "UNIX"))
>- unixy_shell = 1;
>+ if (make_mode_env && !strcaseequ (make_mode_env, "UNIX"))
>+ unixy_shell = 0;
> }
> #endif /* __CYGWIN__ */
>
>--
>Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
>Bug reporting: http://cygwin.com/bugs.html
>Documentation: http://cygwin.com/docs.html
>FAQ: http://cygwin.com/faq/
--
cgf@redhat.com Red Hat, Inc.
http://sources.redhat.com/ http://www.redhat.com/
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: make 3.79.1-4 'make: /bin/sh.exe: Command not found' when run ning without sh.exe
@ 2001-11-11 8:26 Craig Hackney
2001-11-11 8:26 ` Christopher Faylor
0 siblings, 1 reply; 6+ messages in thread
From: Craig Hackney @ 2001-11-11 8:26 UTC (permalink / raw)
To: 'cygwin@cygwin.com'; +Cc: Craig Hackney
The patch below looks good.
Thanks,
-----Original Message-----
From: Christopher Faylor [mailto:cgf@redhat.com]
Sent: Friday, November 16, 2001 12:01 PM
To: cygwin@cygwin.com
Cc: craig@triscend.com
Subject: Re: make 3.79.1-4 'make: /bin/sh.exe: Command not found' when
running without sh.exe
Trying again, cc'ing the original sender.
cgf
On Thu, Nov 15, 2001 at 10:30:54PM -0500, Christopher Faylor wrote:
>On Thu, Nov 15, 2001 at 07:00:13PM -0800, Craig Hackney wrote:
>>
>> There appears to be a problem with this version of make please
>> see below.
>
>Thanks for the analysis.
>
>The patch below should fix this, right?
>
>cgf
2001-11-15 Christopher Faylor <cgf@redhat.com>
* main.c (main): Invert sense of test to ensure that unixy_shell is
set
to zero if MAKE_MODE is not set to UNIX.
Index: main.c
===================================================================
RCS file: /cvs/cvsfiles/devo/make/main.c,v
retrieving revision 1.47
diff -u -p -r1.47 main.c
--- main.c 2001/06/26 19:12:04 1.47
+++ main.c 2001/11/16 03:20:03
@@ -870,11 +870,10 @@ int main (int argc, char ** argv)
char *make_mode_env;
/* Read the environment variable MAKE_MODE */
- /* If it's "UNIX", set unixy_shell to 1. If it's "WIN32" or
- anything else, stay with the default of 0. */
+ /* If it's not "UNIX", set unixy_shell to 0. */
make_mode_env = getenv ("MAKE_MODE");
- if (make_mode_env && strcaseequ (make_mode_env, "UNIX"))
- unixy_shell = 1;
+ if (make_mode_env && !strcaseequ (make_mode_env, "UNIX"))
+ unixy_shell = 0;
}
#endif /* __CYGWIN__ */
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2001-11-19 19:04 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-11-11 8:26 make 3.79.1-4 'make: /bin/sh.exe: Command not found' when run ning without sh.exe Craig Hackney
2001-11-11 8:26 ` Christopher Faylor
2001-11-11 8:26 ` Christopher Faylor
-- strict thread matches above, loose matches on Subject: below --
2001-11-11 17:22 Craig Hackney
2001-11-11 8:26 Craig Hackney
2001-11-11 8:26 ` Christopher Faylor
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).