* RE: Cygwin commands crashes after ssh login
@ 2001-01-17 13:43 frank.palazzolo
2001-01-17 13:54 ` Larry Hall (RFK Partners, Inc)
0 siblings, 1 reply; 32+ messages in thread
From: frank.palazzolo @ 2001-01-17 13:43 UTC (permalink / raw)
To: cygwin
>/bin/sh is bash in the standard gnu dist.. :-) So copy your compiled
>bash to /bin/sh..
>
> /Andy
Thanks Andy,
That's what I thought too, but when the file sizes were so different I looked around and realized my sh.exe came from ash-20001002.tar.gz, which is a different shell and codebase, I guess.
-Frank
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* RE: Cygwin commands crashes after ssh login
2001-01-17 13:43 Cygwin commands crashes after ssh login frank.palazzolo
@ 2001-01-17 13:54 ` Larry Hall (RFK Partners, Inc)
0 siblings, 0 replies; 32+ messages in thread
From: Larry Hall (RFK Partners, Inc) @ 2001-01-17 13:54 UTC (permalink / raw)
To: frank.palazzolo, cygwin
At 04:42 PM 1/17/2001, frank.palazzolo@autodesk.com wrote:
> >/bin/sh is bash in the standard gnu dist.. :-) So copy your compiled
> >bash to /bin/sh..
> >
> > /Andy
>
>Thanks Andy,
>
>That's what I thought too, but when the file sizes were so different I looked around and realized my sh.exe came from ash-20001002.tar.gz, which is a different shell and codebase, I guess.
Absolutely. In Cygwin /bin/sh is NOT equivalent to /bin/bash. /bin/sh is
ash, which is an optimized version of the bourne shell. Its used instead of
bash for performance reasons (mostly noticeable in configures). However
ash does seem to have more bugs than bash (if the issues that arise on this
list are any indication). While the bugs that have been found have been
rapidly fixed, how many are left is uncertain (as always). If shell
performance is not you're major concern, you can use bash as /bin/sh.
However, recompiled or not, any version of bash is different enough from
ash to have a strong potential for reacting differently in any particular
case. Usually this means its more forgiving/works better. YMMV.
Larry Hall lhall@rfk.com
RFK Partners, Inc. http://www.rfk.com
118 Washington Street (508) 893-9779 - RFK Office
Holliston, MA 01746 (508) 893-9889 - FAX
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
@ 2001-01-18 7:23 Yadin Goldschmidt
2001-01-18 8:18 ` Corinna Vinschen
0 siblings, 1 reply; 32+ messages in thread
From: Yadin Goldschmidt @ 2001-01-18 7:23 UTC (permalink / raw)
To: cygwin
Corinna,
I tried both -1 and -2. I think the problem is with the cygwin dll
since if I use 1.1.5 the problem disappears. What is also strange is
that if I run sshd -d from a shell the problem does not occur. It only
occurs with sshd run from srvany. Please read carefully my setup
1., 2., 3. 4. in my previous mail, maybe you can reproduce it.
The CYGWIN variable ntsec, tty is defined in NT Control Panel ->system
->environment. The files ssh_host_key and ssh_host_dsa_key have permissions
-rw------- and belong to user.Adminstrators.
What is also interesting is that after the exception occurs I can
still run cygwin commands and the connection is not lost.
Yadin.
>On Wed, Jan 17, 2001 at 10:08:08AM -0500, Yadin Goldschmidt wrote:
>SSH Version OpenSSH_2.3.0p1, protocol versions 1.5/2.0.
>Which one? -1 or -2? Did you try both? Did you try the
>experimental version 20001221?
>Corinna
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
2001-01-18 7:23 Yadin Goldschmidt
@ 2001-01-18 8:18 ` Corinna Vinschen
0 siblings, 0 replies; 32+ messages in thread
From: Corinna Vinschen @ 2001-01-18 8:18 UTC (permalink / raw)
To: cygwin
On Thu, Jan 18, 2001 at 10:22:55AM -0500, Yadin Goldschmidt wrote:
>
> Corinna,
> I tried both -1 and -2. I think the problem is with the cygwin dll
> since if I use 1.1.5 the problem disappears. What is also strange is
> that if I run sshd -d from a shell the problem does not occur. It only
> occurs with sshd run from srvany. Please read carefully my setup
> 1., 2., 3. 4. in my previous mail, maybe you can reproduce it.
Same here. I _did_ read your mail!
> The CYGWIN variable ntsec, tty is defined in NT Control Panel ->system
> ->environment.
Ditto. (CYGWIN = binmode tty ntsec)
> ->environment. The files ssh_host_key and ssh_host_dsa_key have permissions
> -rw------- and belong to user.Adminstrators.
Ditto.
No problem here using different accounts, using tcsh or bash as
login shell.
Note that I reinstalled Cygwin from scratch here! On my developer box!
I'm using the old ssh key files of course but everything else is fresh
and new including all mount points (now according to the installation
default). I'm using the 20001221 version of OpenSSH, though, which you
can install using setup.
Corinna
--
Corinna Vinschen Please, send mails regarding Cygwin to
Cygwin Developer mailto:cygwin@cygwin.com
Red Hat, Inc.
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
@ 2001-01-17 13:12 frank.palazzolo
2001-01-18 6:07 ` Corinna Vinschen
2001-01-25 10:37 ` Erdely, Michael
0 siblings, 2 replies; 32+ messages in thread
From: frank.palazzolo @ 2001-01-17 13:12 UTC (permalink / raw)
To: cygwin
Hello,
I'm a newbie to cygwin, but I have this exact problem with sshd, and a little more info on it.
I'm running Win2K SP1 and using inetd to launch sshd.
I rebuilt bash.exe from the sources and the problem disappeared!
However, I also tried replacing the shell of the logon user with /bin/sh and the problem still occurs. I haven't rebuilt sh.exe.
Could there be something wrong with the bash.exe in the binary distribution..?
By the way, it seems that a few lines failed in the configure.in for bash:
dnl Use GNU m4 macros to get the distribution and patchlevel information
dnl into configure without requiring the files to be distributed
[BASHVERS=]dnl
esyscmd(cat _distribution)dnl
[BASHPATCH]dnl
esyscmd(cat _patchlevel)dnl
I had to to hack those two lines to get bash to build, is that normal?
Thanks,
Frank Palazzolo
frank.palazzolo@autodesk.com
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
2001-01-17 13:12 frank.palazzolo
@ 2001-01-18 6:07 ` Corinna Vinschen
2001-01-25 10:37 ` Erdely, Michael
1 sibling, 0 replies; 32+ messages in thread
From: Corinna Vinschen @ 2001-01-18 6:07 UTC (permalink / raw)
To: cygwin
On Wed, Jan 17, 2001 at 01:11:53PM -0800, frank.palazzolo@autodesk.com wrote:
> Hello,
>
> I'm a newbie to cygwin, but I have this exact problem with sshd, and a little more info on it.
>
> I'm running Win2K SP1 and using inetd to launch sshd.
> I rebuilt bash.exe from the sources and the problem disappeared!
> However, I also tried replacing the shell of the logon user with /bin/sh and the problem still occurs. I haven't rebuilt sh.exe.
>
> Could there be something wrong with the bash.exe in the binary distribution..?
I tried it and I *sigh* still can't reproduce that. When I'm using
bash or ash from the net distro as login shell, everything works.
Corinna
--
Corinna Vinschen Please, send mails regarding Cygwin to
Cygwin Developer mailto:cygwin@cygwin.com
Red Hat, Inc.
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
2001-01-17 13:12 frank.palazzolo
2001-01-18 6:07 ` Corinna Vinschen
@ 2001-01-25 10:37 ` Erdely, Michael
2001-01-25 12:25 ` Ross Smith
1 sibling, 1 reply; 32+ messages in thread
From: Erdely, Michael @ 2001-01-25 10:37 UTC (permalink / raw)
To: cygwin
Frank's recompilation success has been repeated. And, I recompiled ASH as
well. Problem is gone on three machines.
Thanks, Frank (and Yadin).
If you're interested in pre-re-compiled binaries, check out
ftp://ftp.erdelynet.com/ftp/downloads/bash.exe.gz and
ftp://ftp.erdelynet.com/ftp/downloads/sh.exe.gz . If you want some
information about installing these files, look at
http://mike.erdelynet.com/sshd-error.asp#solution .
One note, when I re-compiled bash, I had to create _distribution and
_patchlevel files to work. After doing so, though, I was successful.
Please let me know if you have any questions/comments,
Mike Erdely
mailto:mike@erdelynet.com
http://mike.erdelynet.com/
----- Original Message -----
From: <frank.palazzolo@autodesk.com>
To: <cygwin@cygwin.com>
Sent: Wednesday, January 17, 2001 4:11 PM
Subject: Re: Cygwin commands crashes after ssh login
>
> Hello,
>
> I'm a newbie to cygwin, but I have this exact problem with sshd, and a
little more info on it.
>
> I'm running Win2K SP1 and using inetd to launch sshd.
> I rebuilt bash.exe from the sources and the problem disappeared!
> However, I also tried replacing the shell of the logon user with /bin/sh
and the problem still occurs. I haven't rebuilt sh.exe.
>
> Could there be something wrong with the bash.exe in the binary
distribution..?
>
> By the way, it seems that a few lines failed in the configure.in for bash:
>
> dnl Use GNU m4 macros to get the distribution and patchlevel information
> dnl into configure without requiring the files to be distributed
> [BASHVERS=]dnl
> esyscmd(cat _distribution)dnl
> [BASHPATCH]dnl
> esyscmd(cat _patchlevel)dnl
>
> I had to to hack those two lines to get bash to build, is that normal?
>
> Thanks,
> Frank Palazzolo
>
> frank.palazzolo@autodesk.com
>
>
> --
> Want to unsubscribe from this list?
> Check out: http://cygwin.com/ml/#unsubscribe-simple
>
>
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
2001-01-25 10:37 ` Erdely, Michael
@ 2001-01-25 12:25 ` Ross Smith
2001-01-25 12:34 ` Larry Hall (RFK Partners, Inc)
2001-01-25 13:36 ` Erdely, Michael
0 siblings, 2 replies; 32+ messages in thread
From: Ross Smith @ 2001-01-25 12:25 UTC (permalink / raw)
To: cygwin
"Erdely, Michael" wrote:
>
> Frank's recompilation success has been repeated. And, I recompiled ASH as
> well. Problem is gone on three machines.
>
> Thanks, Frank (and Yadin).
>
> If you're interested in pre-re-compiled binaries, check out
> ftp://ftp.erdelynet.com/ftp/downloads/bash.exe.gz and
> ftp://ftp.erdelynet.com/ftp/downloads/sh.exe.gz . If you want some
> information about installing these files, look at
> http://mike.erdelynet.com/sshd-error.asp#solution .
>
> One note, when I re-compiled bash, I had to create _distribution and
> _patchlevel files to work. After doing so, though, I was successful.
>
> Please let me know if you have any questions/comments,
> Mike Erdely
> mailto:mike@erdelynet.com
> http://mike.erdelynet.com/
I downloaded your binaries and was about to install Cygwin 1.1.7 and try
them, until I cycled through the versions available in the Setup list
and found that the mirrors are no longer carrying 1.1.5, only 1.1.6 and
1.1.7. That means that, if I try it and it doesn't work, I have no way
to revert to the last working version. I can't risk that.
To the Cygwin/Red Hat people: Please, could you make 1.1.5 available
until the sshd problem is resolved?
--
Ross Smith <ross.s@ihug.co.nz> The Internet Group, Auckland, New Zealand
========================================================================
"Normally he was insane, but he had lucid moments
when he was merely stupid." -- Heinrich Heine
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
2001-01-25 12:25 ` Ross Smith
@ 2001-01-25 12:34 ` Larry Hall (RFK Partners, Inc)
2001-01-25 13:57 ` Ross Smith
2001-01-25 13:36 ` Erdely, Michael
1 sibling, 1 reply; 32+ messages in thread
From: Larry Hall (RFK Partners, Inc) @ 2001-01-25 12:34 UTC (permalink / raw)
To: Ross Smith, cygwin
At 03:25 PM 1/25/2001, Ross Smith wrote:
>"Erdely, Michael" wrote:
> >
> > Frank's recompilation success has been repeated. And, I recompiled ASH as
> > well. Problem is gone on three machines.
> >
> > Thanks, Frank (and Yadin).
> >
> > If you're interested in pre-re-compiled binaries, check out
> > ftp://ftp.erdelynet.com/ftp/downloads/bash.exe.gz and
> > ftp://ftp.erdelynet.com/ftp/downloads/sh.exe.gz . If you want some
> > information about installing these files, look at
> > http://mike.erdelynet.com/sshd-error.asp#solution .
> >
> > One note, when I re-compiled bash, I had to create _distribution and
> > _patchlevel files to work. After doing so, though, I was successful.
> >
> > Please let me know if you have any questions/comments,
> > Mike Erdely
> > mailto:mike@erdelynet.com
> > http://mike.erdelynet.com/
>
>I downloaded your binaries and was about to install Cygwin 1.1.7 and try
>them, until I cycled through the versions available in the Setup list
>and found that the mirrors are no longer carrying 1.1.5, only 1.1.6 and
>1.1.7. That means that, if I try it and it doesn't work, I have no way
>to revert to the last working version. I can't risk that.
>
>To the Cygwin/Red Hat people: Please, could you make 1.1.5 available
>until the sshd problem is resolved?
You can always save your current cygwin1.dll as a backup...
Larry Hall lhall@rfk.com
RFK Partners, Inc. http://www.rfk.com
118 Washington Street (508) 893-9779 - RFK Office
Holliston, MA 01746 (508) 893-9889 - FAX
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
2001-01-25 12:34 ` Larry Hall (RFK Partners, Inc)
@ 2001-01-25 13:57 ` Ross Smith
2001-01-25 15:00 ` Larry Hall (RFK Partners, Inc)
0 siblings, 1 reply; 32+ messages in thread
From: Ross Smith @ 2001-01-25 13:57 UTC (permalink / raw)
To: cygwin
"Larry Hall (RFK Partners, Inc)" wrote:
>
> At 03:25 PM 1/25/2001, Ross Smith wrote:
> >
> >I downloaded your binaries and was about to install Cygwin 1.1.7 and try
> >them, until I cycled through the versions available in the Setup list
> >and found that the mirrors are no longer carrying 1.1.5, only 1.1.6 and
> >1.1.7. That means that, if I try it and it doesn't work, I have no way
> >to revert to the last working version. I can't risk that.
> >
> >To the Cygwin/Red Hat people: Please, could you make 1.1.5 available
> >until the sshd problem is resolved?
>
> You can always save your current cygwin1.dll as a backup...
Oh, thanks. I didn't realise that was all that was involved; I'd been
assuming that the package called "Cygwin" would be a big chunk of the
system with a whole bunch of files.
--
Ross Smith <ross.s@ihug.co.nz> The Internet Group, Auckland, New Zealand
========================================================================
"Normally he was insane, but he had lucid moments
when he was merely stupid." -- Heinrich Heine
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
2001-01-25 13:57 ` Ross Smith
@ 2001-01-25 15:00 ` Larry Hall (RFK Partners, Inc)
0 siblings, 0 replies; 32+ messages in thread
From: Larry Hall (RFK Partners, Inc) @ 2001-01-25 15:00 UTC (permalink / raw)
To: Ross Smith, cygwin
At 04:57 PM 1/25/2001, Ross Smith wrote:
>"Larry Hall (RFK Partners, Inc)" wrote:
> >
> > At 03:25 PM 1/25/2001, Ross Smith wrote:
> > >
> > >I downloaded your binaries and was about to install Cygwin 1.1.7 and try
> > >them, until I cycled through the versions available in the Setup list
> > >and found that the mirrors are no longer carrying 1.1.5, only 1.1.6 and
> > >1.1.7. That means that, if I try it and it doesn't work, I have no way
> > >to revert to the last working version. I can't risk that.
> > >
> > >To the Cygwin/Red Hat people: Please, could you make 1.1.5 available
> > >until the sshd problem is resolved?
> >
> > You can always save your current cygwin1.dll as a backup...
>
>Oh, thanks. I didn't realise that was all that was involved; I'd been
>assuming that the package called "Cygwin" would be a big chunk of the
>system with a whole bunch of files.
There's more in the package but for your purposes, this is the most important
change. You probably won't notice any difference in anything else. However,
if you're concerned (paraniod?;-)), you can always backup everything that
comes in the 1.1.7 cygwin tar ball and then you'll have exactly what was in
1.1.5.
Larry Hall lhall@rfk.com
RFK Partners, Inc. http://www.rfk.com
118 Washington Street (508) 893-9779 - RFK Office
Holliston, MA 01746 (508) 893-9889 - FAX
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
2001-01-25 12:25 ` Ross Smith
2001-01-25 12:34 ` Larry Hall (RFK Partners, Inc)
@ 2001-01-25 13:36 ` Erdely, Michael
2001-01-25 14:30 ` Earnie Boyd
1 sibling, 1 reply; 32+ messages in thread
From: Erdely, Michael @ 2001-01-25 13:36 UTC (permalink / raw)
To: cygwin
Look at http://mike.erdelynet.com/sshd-error.asp#solution . This will
explain how to install cygwin-1.1.5-7.
-ME
----- Original Message -----
From: "Ross Smith" <ross.s@ihug.co.nz>
To: <cygwin@cygwin.com>
Sent: Thursday, January 25, 2001 3:25 PM
Subject: Re: Cygwin commands crashes after ssh login
> "Erdely, Michael" wrote:
> >
> > Frank's recompilation success has been repeated. And, I recompiled ASH
as
> > well. Problem is gone on three machines.
> >
> > Thanks, Frank (and Yadin).
> >
> > If you're interested in pre-re-compiled binaries, check out
> > ftp://ftp.erdelynet.com/ftp/downloads/bash.exe.gz and
> > ftp://ftp.erdelynet.com/ftp/downloads/sh.exe.gz . If you want some
> > information about installing these files, look at
> > http://mike.erdelynet.com/sshd-error.asp#solution .
> >
> > One note, when I re-compiled bash, I had to create _distribution and
> > _patchlevel files to work. After doing so, though, I was successful.
> >
> > Please let me know if you have any questions/comments,
> > Mike Erdely
> > mailto:mike@erdelynet.com
> > http://mike.erdelynet.com/
>
> I downloaded your binaries and was about to install Cygwin 1.1.7 and try
> them, until I cycled through the versions available in the Setup list
> and found that the mirrors are no longer carrying 1.1.5, only 1.1.6 and
> 1.1.7. That means that, if I try it and it doesn't work, I have no way
> to revert to the last working version. I can't risk that.
>
> To the Cygwin/Red Hat people: Please, could you make 1.1.5 available
> until the sshd problem is resolved?
>
> --
> Ross Smith <ross.s@ihug.co.nz> The Internet Group, Auckland, New Zealand
> ========================================================================
> "Normally he was insane, but he had lucid moments
> when he was merely stupid." -- Heinrich Heine
>
> --
> Want to unsubscribe from this list?
> Check out: http://cygwin.com/ml/#unsubscribe-simple
>
>
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
2001-01-25 13:36 ` Erdely, Michael
@ 2001-01-25 14:30 ` Earnie Boyd
2001-01-25 14:52 ` Erdely, Michael
0 siblings, 1 reply; 32+ messages in thread
From: Earnie Boyd @ 2001-01-25 14:30 UTC (permalink / raw)
To: Erdely, Michael; +Cc: cygwin
"Erdely, Michael" wrote:
>
> Look at http://mike.erdelynet.com/sshd-error.asp#solution . This will
> explain how to install cygwin-1.1.5-7.
>
And if you have problems, please email Mike privately.
Earnie.
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
2001-01-25 14:30 ` Earnie Boyd
@ 2001-01-25 14:52 ` Erdely, Michael
2001-01-25 16:30 ` Earnie Boyd
0 siblings, 1 reply; 32+ messages in thread
From: Erdely, Michael @ 2001-01-25 14:52 UTC (permalink / raw)
To: Earnie Boyd
Is there a reason 1. that you sent this to me directly? and 2. why you felt
the need to say anything at all?
-ME
----- Original Message -----
From: "Earnie Boyd" <earnie_boyd@yahoo.com>
To: "Erdely, Michael" <mike@erdelynet.com>
Cc: <cygwin@cygwin.com>
Sent: Thursday, January 25, 2001 5:31 PM
Subject: Re: Cygwin commands crashes after ssh login
> "Erdely, Michael" wrote:
> >
> > Look at http://mike.erdelynet.com/sshd-error.asp#solution . This will
> > explain how to install cygwin-1.1.5-7.
> >
>
> And if you have problems, please email Mike privately.
>
> Earnie.
>
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
>
>
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
2001-01-25 14:52 ` Erdely, Michael
@ 2001-01-25 16:30 ` Earnie Boyd
0 siblings, 0 replies; 32+ messages in thread
From: Earnie Boyd @ 2001-01-25 16:30 UTC (permalink / raw)
To: Erdely, Michael; +Cc: Earnie Boyd
"Erdely, Michael" wrote:
>
> Is there a reason 1. that you sent this to me directly?
I `Replied All' you just happened to be the To and the list the Cc.
> and 2. why you felt the need to say anything at all?
>
This list supports the Cygwin distributions available via the "Install
Cygwin Now" icon at http://cygwin.com . If you're providing independent
distributions of the cygwin1.dll then you must resolve the problems. If
someone has a problem with older versions of Cygwin then the immediate
response will be to update via the "Install Cygwin Now" icon. If
someone acknowledges that they received the package from a private site
they will be immediately redirected to the site owner. I was being
proactive.
Earnie.
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
* Re: Cygwin commands crashes after ssh login
@ 2001-01-17 7:08 Yadin Goldschmidt
2001-01-18 6:10 ` Corinna Vinschen
0 siblings, 1 reply; 32+ messages in thread
From: Yadin Goldschmidt @ 2001-01-17 7:08 UTC (permalink / raw)
To: cygwin
Corina,
Here is the problem: I am running NT4.o sp6. cygwin 1.1.7
1. Im running sshd using srvany from a user who is part of administrator
group
2. This user has all the additional previleges.
3. There is a line in NT environment:
CYGWIN = ntsec tty
4. The files in /etc belong to user.Administrators where 'user' is
the user account from which sshd is run.
5. Everything is fine when I login as that user and use password
authentication. But when I login usind a different account an exception
occurs. Here is the debug from ssh -v. I only replaced the machine name by
XXX.XXX
$ssh -v XXX.XXX -l Administrator
SSH Version OpenSSH_2.3.0p1, protocol versions 1.5/2.0.
Compiled with SSL (0x0090581f).
debug: Reading configuration data /etc/ssh_config
debug: Applying options for *
debug: Seeding random number generator
debug: ssh_connect: getuid 1000 geteuid 1000 anon 0
debug: Connecting to XXX.XXX [XXX.XXX.XXX.XX] port 22.
debug: Seeding random number generator
debug: Allocated local port 955.
debug: Connection established.
debug: Remote protocol version 1.99, remote software version OpenSSH_2.3.0p1
debug: no match: OpenSSH_2.3.0p1
debug: Local version string SSH-1.5-OpenSSH_2.3.0p1
debug: Waiting for server public key.
debug: Received server public key (768 bits) and host key (1024 bits).
debug: Host 'XXX.XXX' is known and matches the RSA host key.
debug: Seeding random number generator
debug: Encryption type: 3des
debug: Sent encrypted session key.
debug: Installing crc compensation attack detector.
debug: Received encrypted confirmation.
debug: Doing password authentication.
Administrator@XXX.XXX's password:
debug: Requesting pty.
debug: Requesting shell.
debug: Entering interactive session.
0 [main] ?a 0 handle_exceptions: Exception: STATUS_ACCESS_VIOLATION
Exception: STATUS_ACCESS_VIOLATION at eip=61001B87
eax=00000069 ebx=352E3673 ecx=00000000 edx=352E367B esi=00000000
edi=0240FF74
ebp=0240FC2C esp=0240FECC program=?a
cs=001B ds=0023 es=0023 fs=0038 gs=0000 ss=0023
Stack trace:
Frame Function Args
0240FC2C 61001B87 (00000000, 00000000, 00000000, 00000000)
0240FEF4 61001B87 (00000038, 61000001, 0240FF44, 610032C9)
0240FF44 610033D8 (004072CC, 6107C13C, 00000000, 00000000)
0240FF74 61003AAD (00000000, 00000000, 00000000, 00000000)
0240FF94 61003AEC (00407230, 004011D0, 0240FFC0, 00401038)
0240FFA4 00405206 (004011D0, 8011C6C8, 77F1B9E7, FFFFFFFE)
0240FFC0 00401038 (00000000, 00000000, 7FFDF000, 7FFDF000)
0240FFF0 77F1B9EA (00401000, 00000000, 000000B0, 00000100)
In addition a Dr. Watson box appears with the following information:
id.exe
Exception: access violation (0xc0000005), Address 0x610045f4
Yadin.
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
--
Want to unsubscribe from this list?
Check out: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 32+ messages in thread
[parent not found: <Corinna>]
end of thread, other threads:[~2001-01-25 16:30 UTC | newest]
Thread overview: 32+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2001-01-17 13:43 Cygwin commands crashes after ssh login frank.palazzolo
2001-01-17 13:54 ` Larry Hall (RFK Partners, Inc)
-- strict thread matches above, loose matches on Subject: below --
2001-01-18 7:23 Yadin Goldschmidt
2001-01-18 8:18 ` Corinna Vinschen
2001-01-17 13:12 frank.palazzolo
2001-01-18 6:07 ` Corinna Vinschen
2001-01-25 10:37 ` Erdely, Michael
2001-01-25 12:25 ` Ross Smith
2001-01-25 12:34 ` Larry Hall (RFK Partners, Inc)
2001-01-25 13:57 ` Ross Smith
2001-01-25 15:00 ` Larry Hall (RFK Partners, Inc)
2001-01-25 13:36 ` Erdely, Michael
2001-01-25 14:30 ` Earnie Boyd
2001-01-25 14:52 ` Erdely, Michael
2001-01-25 16:30 ` Earnie Boyd
2001-01-17 7:08 Yadin Goldschmidt
2001-01-18 6:10 ` Corinna Vinschen
[not found] <Corinna>
[not found] ` <Vinschen's>
[not found] ` <message>
[not found] ` <of>
[not found] ` <"Tue,>
[not found] ` <16>
[not found] ` <Jan>
[not found] ` <2001>
[not found] ` <14:32:32>
[not found] ` <+0100>
2001-01-16 0:08 ` Christer.H.Jansson
2001-01-16 4:41 ` Erdely, Michael
2001-01-16 5:32 ` Corinna Vinschen
2001-01-16 5:49 ` Erdely, Michael
2001-01-16 6:08 ` Henry S. Thompson
2001-01-16 7:38 ` Larry Hall (RFK Partners, Inc)
2001-01-16 7:56 ` Wei Ku
2001-01-16 8:02 ` Christopher Faylor
2001-01-17 4:04 ` Corinna Vinschen
2001-01-16 9:11 ` Egor Duda
2001-01-16 9:28 ` Christopher Faylor
2001-01-17 5:20 ` Egor Duda
2001-01-17 5:29 ` Christopher Faylor
2001-01-17 3:57 ` Corinna Vinschen
2001-01-17 5:20 ` Egor Duda
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).