* Network question.
@ 1999-09-16 3:33 Jens Yllman
1999-09-30 23:42 ` Jens Yllman
0 siblings, 1 reply; 6+ messages in thread
From: Jens Yllman @ 1999-09-16 3:33 UTC (permalink / raw)
To: GNUWin32
Hi,
I know this is not a question for this mailinglist. But I've tried the
'right' channels without success. So I just give it a shot here.
What I would like to do is to set up IP address/default gateway/DNS/...
from my own program. As do the 'control panel->network'. I know where in
the regestry all the information is stored. But I don't know the last
step to make it active. This is probably something that everybody
writing device drivers know. Especially Network device drivers. I've
tried to read the Windows DDK part of MSDN library. But I can not find
anything. And when I look at NCPA.CPL, the module representing 'control
panel->network', it uses DLL files not included in the MSDN library.
So I hope someone here knows. There must be a way.
Jens Yllman
------------------------------------------------------------
Uniweb AB Phone: +46 8 626 42 00
P O Box 745 FAX: +46 8 626 42 01
S-191 27 SOLLENTUNA
SWEDEN http://www.uniweb.se/
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Network question.
1999-09-16 3:33 Network question Jens Yllman
@ 1999-09-30 23:42 ` Jens Yllman
0 siblings, 0 replies; 6+ messages in thread
From: Jens Yllman @ 1999-09-30 23:42 UTC (permalink / raw)
To: GNUWin32
Hi,
I know this is not a question for this mailinglist. But I've tried the
'right' channels without success. So I just give it a shot here.
What I would like to do is to set up IP address/default gateway/DNS/...
from my own program. As do the 'control panel->network'. I know where in
the regestry all the information is stored. But I don't know the last
step to make it active. This is probably something that everybody
writing device drivers know. Especially Network device drivers. I've
tried to read the Windows DDK part of MSDN library. But I can not find
anything. And when I look at NCPA.CPL, the module representing 'control
panel->network', it uses DLL files not included in the MSDN library.
So I hope someone here knows. There must be a way.
Jens Yllman
------------------------------------------------------------
Uniweb AB Phone: +46 8 626 42 00
P O Box 745 FAX: +46 8 626 42 01
S-191 27 SOLLENTUNA
SWEDEN http://www.uniweb.se/
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: Network question.
1999-09-16 4:01 Erik Hensema
1999-09-16 6:25 ` Jens Yllman
@ 1999-09-30 23:42 ` Erik Hensema
1 sibling, 0 replies; 6+ messages in thread
From: Erik Hensema @ 1999-09-30 23:42 UTC (permalink / raw)
To: GNUWin32
> -----Original Message-----
> From: Jens Yllman [ mailto:jens.yllman@uniweb.se ]
> Sent: Thursday, September 16, 1999 12:29 PM
> To: GNUWin32
> Subject: Network question.
> What I would like to do is to set up IP address/default
> gateway/DNS/...
> from my own program. As do the 'control panel->network'. I
> know where in
> the regestry all the information is stored. But I don't know the last
> step to make it active. This is probably something that everybody
> writing device drivers know. Especially Network device drivers. I've
> tried to read the Windows DDK part of MSDN library. But I can not find
> anything. And when I look at NCPA.CPL, the module
> representing 'control
> panel->network', it uses DLL files not included in the MSDN library.
Usually, NT needs to be rebooted to activate a changed IP. Maybe this is all
you need to do?
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Network question.
1999-09-16 6:25 ` Jens Yllman
@ 1999-09-30 23:42 ` Jens Yllman
0 siblings, 0 replies; 6+ messages in thread
From: Jens Yllman @ 1999-09-30 23:42 UTC (permalink / raw)
To: Erik Hensema; +Cc: GNUWin32
Nooop, Win NT is not needed to reboot if you just change
ipaddress/Subnetmask/defaultgatway/nameserver/hostname/domain. And if
you just change the ipadress in the regestry and reboot the control
panel->network will not show any ipadress at all. So after changing the
values some binding data or something need to be updated. But I can not
find how to do that. *sigh*
Jens Yllman
Erik Hensema wrote:
>
> > -----Original Message-----
> > From: Jens Yllman [ mailto:jens.yllman@uniweb.se ]
> > Sent: Thursday, September 16, 1999 12:29 PM
> > To: GNUWin32
> > Subject: Network question.
>
> > What I would like to do is to set up IP address/default
> > gateway/DNS/...
> > from my own program. As do the 'control panel->network'. I
> > know where in
> > the regestry all the information is stored. But I don't know the last
> > step to make it active. This is probably something that everybody
> > writing device drivers know. Especially Network device drivers. I've
> > tried to read the Windows DDK part of MSDN library. But I can not find
> > anything. And when I look at NCPA.CPL, the module
> > representing 'control
> > panel->network', it uses DLL files not included in the MSDN library.
>
> Usually, NT needs to be rebooted to activate a changed IP. Maybe this is all
> you need to do?
>
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com
------------------------------------------------------------
Uniweb AB Phone: +46 8 626 42 00
P O Box 745 FAX: +46 8 626 42 01
S-191 27 SOLLENTUNA
SWEDEN http://www.uniweb.se/
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Network question.
1999-09-16 4:01 Erik Hensema
@ 1999-09-16 6:25 ` Jens Yllman
1999-09-30 23:42 ` Jens Yllman
1999-09-30 23:42 ` Erik Hensema
1 sibling, 1 reply; 6+ messages in thread
From: Jens Yllman @ 1999-09-16 6:25 UTC (permalink / raw)
To: Erik Hensema; +Cc: GNUWin32
Nooop, Win NT is not needed to reboot if you just change
ipaddress/Subnetmask/defaultgatway/nameserver/hostname/domain. And if
you just change the ipadress in the regestry and reboot the control
panel->network will not show any ipadress at all. So after changing the
values some binding data or something need to be updated. But I can not
find how to do that. *sigh*
Jens Yllman
Erik Hensema wrote:
>
> > -----Original Message-----
> > From: Jens Yllman [ mailto:jens.yllman@uniweb.se ]
> > Sent: Thursday, September 16, 1999 12:29 PM
> > To: GNUWin32
> > Subject: Network question.
>
> > What I would like to do is to set up IP address/default
> > gateway/DNS/...
> > from my own program. As do the 'control panel->network'. I
> > know where in
> > the regestry all the information is stored. But I don't know the last
> > step to make it active. This is probably something that everybody
> > writing device drivers know. Especially Network device drivers. I've
> > tried to read the Windows DDK part of MSDN library. But I can not find
> > anything. And when I look at NCPA.CPL, the module
> > representing 'control
> > panel->network', it uses DLL files not included in the MSDN library.
>
> Usually, NT needs to be rebooted to activate a changed IP. Maybe this is all
> you need to do?
>
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com
------------------------------------------------------------
Uniweb AB Phone: +46 8 626 42 00
P O Box 745 FAX: +46 8 626 42 01
S-191 27 SOLLENTUNA
SWEDEN http://www.uniweb.se/
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 6+ messages in thread
* RE: Network question.
@ 1999-09-16 4:01 Erik Hensema
1999-09-16 6:25 ` Jens Yllman
1999-09-30 23:42 ` Erik Hensema
0 siblings, 2 replies; 6+ messages in thread
From: Erik Hensema @ 1999-09-16 4:01 UTC (permalink / raw)
To: GNUWin32
> -----Original Message-----
> From: Jens Yllman [ mailto:jens.yllman@uniweb.se ]
> Sent: Thursday, September 16, 1999 12:29 PM
> To: GNUWin32
> Subject: Network question.
> What I would like to do is to set up IP address/default
> gateway/DNS/...
> from my own program. As do the 'control panel->network'. I
> know where in
> the regestry all the information is stored. But I don't know the last
> step to make it active. This is probably something that everybody
> writing device drivers know. Especially Network device drivers. I've
> tried to read the Windows DDK part of MSDN library. But I can not find
> anything. And when I look at NCPA.CPL, the module
> representing 'control
> panel->network', it uses DLL files not included in the MSDN library.
Usually, NT needs to be rebooted to activate a changed IP. Maybe this is all
you need to do?
--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~1999-09-30 23:42 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1999-09-16 3:33 Network question Jens Yllman
1999-09-30 23:42 ` Jens Yllman
1999-09-16 4:01 Erik Hensema
1999-09-16 6:25 ` Jens Yllman
1999-09-30 23:42 ` Jens Yllman
1999-09-30 23:42 ` Erik Hensema
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).