info files

info files

[Jeff Jensen]

I am trying to use the CVS info files in /usr/info, and I haven't figured
out how to process them to use them as intended (reading the source is sort
of OK, but...).  A quick pointer to someone who has only read Emacs info
files would be greatly appreciated...thank you.


--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

Re: info files

[Heinz-Juergen Oertel]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 766 bytes --]

Jeff Jensen wrote:
> 
> I am trying to use the CVS info files in /usr/info, and I haven't figured
> out how to process them to use them as intended (reading the source is sort
> of OK, but...).  A quick pointer to someone who has only read Emacs info
> files would be greatly appreciated...thank you.
> 
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com

try to find tkinfo, a tcl/tk based info viewer
you must have installed the tk package from to cygwin packages.


Dont' forget to run install-info after downloading info files.

-- 
with best regards / mit freundlichen Grüßen

   Heinz-Jürgen Oertel

--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

Re: info files

[Doug Wyatt]

You'll want to get texinfo-4_0_tar.gz from the gnu site,
and build and install it.

Regards,
Doug Wyatt

> 
> This is probably a dumb question, but is there a tool
> to read .info files, or just a text editor.From
> looking at them I am assuming there is a tool of some
> type.
> 
> 
> Thanks,
> Carson
> crwfl@yahoo.com
> __________________________________________________
> Do You Yahoo!?
> Bid and sell for free at http://auctions.yahoo.com
> 
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com
> 



--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

RE: info files

[Brian Jones]

Emacs reads info files just fine as well, so if you already have that, use
it.  I think it is easier to use than 'info' anyway.  You can go through the
tutorial on using emacs info via 'C-h i' and selecting "Info" with the mouse
or cursor and the rest is explained in the tutorial.

Emacs command: C-u C-h i
Specify the info file, such as: gmake.info.gz

Brian

> -----Original Message-----
> From: Andre Oliveira da Costa [ mailto:costa@cade.com.br ]
> Sent: Friday, November 19, 1999 12:38 PM
> To: Carson Wilcox; cygwin@sourceware.cygnus.com
> Subject: RE: info files
>
>
> You must use the "info" program to read .info files. You
> might download it
> from
> ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/cygwin/ports/in
> fo-2.18-cygb20
> .exe.gz
>


--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

info files

[Carson Wilcox]

This is probably a dumb question, but is there a tool
to read .info files, or just a text editor.From
looking at them I am assuming there is a tool of some
type.


Thanks,
Carson
crwfl@yahoo.com
__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com

--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

RE: info files

[Andre Oliveira da Costa]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1469 bytes --]

You must use the "info" program to read .info files. You might download it
from
ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/cygwin/ports/info-2.18-cygb20
.exe.gz

Please note that you'll have to create "dir" files on each info directory in
order for "info" to know which page to display. AFAIK you have to create
them manually... I really hope I'm wrong, somebody _please_ correct me ;)
The syntax is very simple, I'm attaching one I use here. For each set of
info files, you must create a line similar to the one below, and put inside
the parenthesis the name of the "master" info file, without the ".info". For
example, for gcc, the info files are named gcc.info-*, and your entry should
look like

* GCC: (gcc).   Information about the gcc Compiler

The text outisde the parenthesis is arbitrary.

You might also have to create an environment variable INFOPATH containing
all your info directories separated by colons.

TIP: once running "info", type "?" to get get help.

HTH,

Regards,

Andre
--
André Oliveira da Costa
(costa@cade.com.br)


> -----Original Message-----
> From: cygwin-owner@sourceware.cygnus.com
> [ mailto:cygwin-owner@sourceware.cygnus.com]On Behalf Of Carson Wilcox
> Sent: Friday, November 19, 1999 1:44 PM
> To: cygwin@sourceware.cygnus.com
> Subject: info files
>
> This is probably a dumb question, but is there a tool
> to read .info files, or just a text editor.From
> looking at them I am assuming there is a tool of some
> type.

[-- Attachment #2: dir --]
[-- Type: application/octet-stream, Size: 1493 bytes --]

RE: info files

[Doug Wyatt]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1859 bytes --]

Hmm,  I built from the gnu source w/o much trouble - it includes
the info.info files and builds a utility called install-info.exe which
you can use to create and update the 'dir' files.

Regards,
Doug Wyatt


> You must use the "info" program to read .info files. You might download it
> from
> ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/cygwin/ports/info-2.18-cygb20
> .exe.gz
>
> Please note that you'll have to create "dir" files on each info directory in
> order for "info" to know which page to display. AFAIK you have to create
> them manually... I really hope I'm wrong, somebody _please_ correct me ;)
> The syntax is very simple, I'm attaching one I use here. For each set of
> info files, you must create a line similar to the one below, and put inside
> the parenthesis the name of the "master" info file, without the ".info". For
> example, for gcc, the info files are named gcc.info-*, and your entry should
> look like
>
> * GCC: (gcc).   Information about the gcc Compiler
>
> The text outisde the parenthesis is arbitrary.
>
> You might also have to create an environment variable INFOPATH containing
> all your info directories separated by colons.
>
> TIP: once running "info", type "?" to get get help.
>
> HTH,
>
> Regards,
>
> Andre
> --
> André Oliveira da Costa
> (costa@cade.com.br)
>
>
> > -----Original Message-----
> > From: cygwin-owner@sourceware.cygnus.com
> > [ mailto:cygwin-owner@sourceware.cygnus.com]On Behalf Of Carson Wilcox
> > Sent: Friday, November 19, 1999 1:44 PM
> > To: cygwin@sourceware.cygnus.com
> > Subject: info files
> >
> > This is probably a dumb question, but is there a tool
> > to read .info files, or just a text editor.From
> > looking at them I am assuming there is a tool of some
> > type.
>



--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

RE: info files

[Brian Jones]

Emacs reads info files just fine as well, so if you already have that, use
it.  I think it is easier to use than 'info' anyway.  You can go through the
tutorial on using emacs info via 'C-h i' and selecting "Info" with the mouse
or cursor and the rest is explained in the tutorial.

Emacs command: C-u C-h i
Specify the info file, such as: gmake.info.gz

Brian

> -----Original Message-----
> From: Andre Oliveira da Costa [ mailto:costa@cade.com.br ]
> Sent: Friday, November 19, 1999 12:38 PM
> To: Carson Wilcox; cygwin@sourceware.cygnus.com
> Subject: RE: info files
>
>
> You must use the "info" program to read .info files. You
> might download it
> from
> ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/cygwin/ports/in
> fo-2.18-cygb20
> .exe.gz
>


--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

RE: info files

[Doug Wyatt]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1859 bytes --]

Hmm,  I built from the gnu source w/o much trouble - it includes
the info.info files and builds a utility called install-info.exe which
you can use to create and update the 'dir' files.

Regards,
Doug Wyatt


> You must use the "info" program to read .info files. You might download it
> from
> ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/cygwin/ports/info-2.18-cygb20
> .exe.gz
>
> Please note that you'll have to create "dir" files on each info directory in
> order for "info" to know which page to display. AFAIK you have to create
> them manually... I really hope I'm wrong, somebody _please_ correct me ;)
> The syntax is very simple, I'm attaching one I use here. For each set of
> info files, you must create a line similar to the one below, and put inside
> the parenthesis the name of the "master" info file, without the ".info". For
> example, for gcc, the info files are named gcc.info-*, and your entry should
> look like
>
> * GCC: (gcc).   Information about the gcc Compiler
>
> The text outisde the parenthesis is arbitrary.
>
> You might also have to create an environment variable INFOPATH containing
> all your info directories separated by colons.
>
> TIP: once running "info", type "?" to get get help.
>
> HTH,
>
> Regards,
>
> Andre
> --
> André Oliveira da Costa
> (costa@cade.com.br)
>
>
> > -----Original Message-----
> > From: cygwin-owner@sourceware.cygnus.com
> > [ mailto:cygwin-owner@sourceware.cygnus.com]On Behalf Of Carson Wilcox
> > Sent: Friday, November 19, 1999 1:44 PM
> > To: cygwin@sourceware.cygnus.com
> > Subject: info files
> >
> > This is probably a dumb question, but is there a tool
> > to read .info files, or just a text editor.From
> > looking at them I am assuming there is a tool of some
> > type.
>



--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

Re: info files

[Doug Wyatt]

You'll want to get texinfo-4_0_tar.gz from the gnu site,
and build and install it.

Regards,
Doug Wyatt

> 
> This is probably a dumb question, but is there a tool
> to read .info files, or just a text editor.From
> looking at them I am assuming there is a tool of some
> type.
> 
> 
> Thanks,
> Carson
> crwfl@yahoo.com
> __________________________________________________
> Do You Yahoo!?
> Bid and sell for free at http://auctions.yahoo.com
> 
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com
> 



--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com

RE: info files

[Andre Oliveira da Costa]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 1469 bytes --]

You must use the "info" program to read .info files. You might download it
from
ftp://ftp.xraylith.wisc.edu/pub/khan/gnu-win32/cygwin/ports/info-2.18-cygb20
.exe.gz

Please note that you'll have to create "dir" files on each info directory in
order for "info" to know which page to display. AFAIK you have to create
them manually... I really hope I'm wrong, somebody _please_ correct me ;)
The syntax is very simple, I'm attaching one I use here. For each set of
info files, you must create a line similar to the one below, and put inside
the parenthesis the name of the "master" info file, without the ".info". For
example, for gcc, the info files are named gcc.info-*, and your entry should
look like

* GCC: (gcc).   Information about the gcc Compiler

The text outisde the parenthesis is arbitrary.

You might also have to create an environment variable INFOPATH containing
all your info directories separated by colons.

TIP: once running "info", type "?" to get get help.

HTH,

Regards,

Andre
--
André Oliveira da Costa
(costa@cade.com.br)


> -----Original Message-----
> From: cygwin-owner@sourceware.cygnus.com
> [ mailto:cygwin-owner@sourceware.cygnus.com]On Behalf Of Carson Wilcox
> Sent: Friday, November 19, 1999 1:44 PM
> To: cygwin@sourceware.cygnus.com
> Subject: info files
>
> This is probably a dumb question, but is there a tool
> to read .info files, or just a text editor.From
> looking at them I am assuming there is a tool of some
> type.

[-- Attachment #2: dir --]
[-- Type: application/octet-stream, Size: 1493 bytes --]

info files

[Carson Wilcox]

This is probably a dumb question, but is there a tool
to read .info files, or just a text editor.From
looking at them I am assuming there is a tool of some
type.


Thanks,
Carson
crwfl@yahoo.com
__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com

--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com