* [ANNOUNCEMENT] Updated: cygport-0.10.3
@ 2011-01-27 3:20 Yaakov (Cygwin/X)
2011-01-27 17:08 ` Charles Wilson
0 siblings, 1 reply; 6+ messages in thread
From: Yaakov (Cygwin/X) @ 2011-01-27 3:20 UTC (permalink / raw)
To: cygwin
I have updated the cygport to version 0.10.3 with the following changes:
* Scripts with erroneous .exe extension are automatically renamed.
* Fixed default excludes where libtool is used without automake.
* apache2.cygclass: fixes for module name detection
* autotools.cygclass: handle configure.ac with subdir configure.in; make
sure ACLOCAL_AMFLAGS directories exist
* berkdb.cygclass: support BDB 5.x
* nant.cygclass: NEW cygclass for NAnt-based builds
* php.cygclass: update for PHP 5.3; canonicalize all known PHP_CHANNELs
* waf.cygclass: fix libexecdir, sysconfdir, and localstatedir
* xfce4.cygclass: update for Xfce 4.8
Yaakov
--
CYGWIN-ANNOUNCE UNSUBSCRIBE INFO
================================
If you want to unsubscribe from the cygwin-announce mailing list, please
use the automated form at:
http://cygwin.com/lists.html#subscribe-unsubscribe
If this does not work, then look at the "List-Unsubscribe: " tag in the
email header of this message. Send email to the address specified
there. It will be in the format:
cygwin-announce-unsubscribe-you=yourdomain.com@cygwin.com
If you need more information on unsubscribing, start reading here:
http://sourceware.org/lists.html#unsubscribe-simple
Please read *all* of the information on unsubscribing that is available
starting at this URL.
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ANNOUNCEMENT] Updated: cygport-0.10.3
2011-01-27 3:20 [ANNOUNCEMENT] Updated: cygport-0.10.3 Yaakov (Cygwin/X)
@ 2011-01-27 17:08 ` Charles Wilson
2011-01-27 17:50 ` Yaakov (Cygwin/X)
0 siblings, 1 reply; 6+ messages in thread
From: Charles Wilson @ 2011-01-27 17:08 UTC (permalink / raw)
To: cygwin
On 1/26/2011 8:10 PM, Yaakov (Cygwin/X) wrote:
> I have updated the cygport to version 0.10.3 with the following changes:
> * Fixed default excludes where libtool is used without automake.
Are you sure about this? I ran into this problem with libiconv +
cygport-0.10.2, so I updated to 0.10.3, but I still got erroneous diffs.
I had to manually modify the .cygport with
DIFF_EXCLUDES="configure ltmain.sh libtool.m4 ltoptions.m4 ltversion.m4
lt~obsolete.m4 aclocal.m4 config.h.in"
I haven't investigated why, 'cause I'm busy working on the libiconv
problem and didn't need the distraction. One odd thing about libiconv:
it uses aclocal, but NOT automake -- maybe that's an issue?
FYI, the last time I built libiconv I did not see this issue, and the
version of cygport I used at the time was 0.9.9.
--
Chuck
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ANNOUNCEMENT] Updated: cygport-0.10.3
2011-01-27 17:08 ` Charles Wilson
@ 2011-01-27 17:50 ` Yaakov (Cygwin/X)
2011-01-28 10:01 ` Charles Wilson
0 siblings, 1 reply; 6+ messages in thread
From: Yaakov (Cygwin/X) @ 2011-01-27 17:50 UTC (permalink / raw)
To: cygwin
On Thu, 2011-01-27 at 11:04 -0500, Charles Wilson wrote:
> On 1/26/2011 8:10 PM, Yaakov (Cygwin/X) wrote:
> > I have updated the cygport to version 0.10.3 with the following changes:
>
> > * Fixed default excludes where libtool is used without automake.
>
> Are you sure about this? I ran into this problem with libiconv +
> cygport-0.10.2, so I updated to 0.10.3, but I still got erroneous diffs.
I'll need to see your .cygport file.
Yaakov
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ANNOUNCEMENT] Updated: cygport-0.10.3
2011-01-27 17:50 ` Yaakov (Cygwin/X)
@ 2011-01-28 10:01 ` Charles Wilson
2011-01-28 11:45 ` Yaakov (Cygwin/X)
0 siblings, 1 reply; 6+ messages in thread
From: Charles Wilson @ 2011-01-28 10:01 UTC (permalink / raw)
To: cygwin
[-- Attachment #1: Type: text/plain, Size: 605 bytes --]
On 1/27/2011 12:06 PM, Yaakov (Cygwin/X) wrote:
> On Thu, 2011-01-27 at 11:04 -0500, Charles Wilson wrote:
>> On 1/26/2011 8:10 PM, Yaakov (Cygwin/X) wrote:
>>> I have updated the cygport to version 0.10.3 with the following changes:
>>
>>> * Fixed default excludes where libtool is used without automake.
>>
>> Are you sure about this? I ran into this problem with libiconv +
>> cygport-0.10.2, so I updated to 0.10.3, but I still got erroneous diffs.
>
> I'll need to see your .cygport file.
Attached...sadly, bootstrapping libiconv and gettext is, well, odd.
Bruno doesn't use autoreconf.
--
Chuck
[-- Attachment #2: libiconv-1.13.1-2.stuff.tar.xz --]
[-- Type: application/octet-stream, Size: 3436 bytes --]
[-- Attachment #3: Type: text/plain, Size: 218 bytes --]
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ANNOUNCEMENT] Updated: cygport-0.10.3
2011-01-28 10:01 ` Charles Wilson
@ 2011-01-28 11:45 ` Yaakov (Cygwin/X)
2011-01-28 20:59 ` Charles Wilson
0 siblings, 1 reply; 6+ messages in thread
From: Yaakov (Cygwin/X) @ 2011-01-28 11:45 UTC (permalink / raw)
To: cygwin
On Thu, 2011-01-27 at 19:37 -0500, Charles Wilson wrote:
> Attached...sadly, bootstrapping libiconv and gettext is, well, odd.
> Bruno doesn't use autoreconf.
Well, that's the problem. cygport knows which files to ignore only when
it controls the process via the *autoreconf() functions. If you run
libtoolize/autoconf/automake manually, you're on your own, so
understandably you need to add the relevant files to DIFF_EXCLUDES.
As for why you didn't need to do this with cygport 0.9.9, that's because
the fine-tuned exclusion code wasn't added until 0.10.0 (commit e153ad5
to be precise) Prior to that, all these files were indiscriminately
excluded from the patch, regardless of whether or how autotools were
actually used.
Yaakov
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [ANNOUNCEMENT] Updated: cygport-0.10.3
2011-01-28 11:45 ` Yaakov (Cygwin/X)
@ 2011-01-28 20:59 ` Charles Wilson
0 siblings, 0 replies; 6+ messages in thread
From: Charles Wilson @ 2011-01-28 20:59 UTC (permalink / raw)
To: cygwin
On 1/28/2011 6:12 AM, Yaakov (Cygwin/X) wrote:
> On Thu, 2011-01-27 at 19:37 -0500, Charles Wilson wrote:
>> Attached...sadly, bootstrapping libiconv and gettext is, well, odd.
>> Bruno doesn't use autoreconf.
>
> Well, that's the problem. cygport knows which files to ignore only when
> it controls the process via the *autoreconf() functions. If you run
> libtoolize/autoconf/automake manually, you're on your own, so
> understandably you need to add the relevant files to DIFF_EXCLUDES.
Fair enough. Thanks for the explanation.
--
Chuck
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-01-28 17:10 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-01-27 3:20 [ANNOUNCEMENT] Updated: cygport-0.10.3 Yaakov (Cygwin/X)
2011-01-27 17:08 ` Charles Wilson
2011-01-27 17:50 ` Yaakov (Cygwin/X)
2011-01-28 10:01 ` Charles Wilson
2011-01-28 11:45 ` Yaakov (Cygwin/X)
2011-01-28 20:59 ` Charles Wilson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).