sshd setup question

sshd setup question

[Dan Adams]

Does anyone know if there is either a script that will automate the process
of setting up an ssh server? Or is there a tutorial setup page?

Dan Adams - dan@infochi.com
http://www.infochi.com




--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Krzysztof Duleba]

Dan Adams" wrote

> Does anyone know if there is either a script that will automate the
process
> of setting up an ssh server? Or is there a tutorial setup page?

http://tech.erdelynet.com/cygwin-sshd.html

Regards
Krzysztof Duleba



--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Larry Hall]

At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
>Dan Adams" wrote
>
>> Does anyone know if there is either a script that will automate the
>process
>> of setting up an ssh server? Or is there a tutorial setup page?
>
>http://tech.erdelynet.com/cygwin-sshd.html


And please follow-up with any questions generated from following the 
directions at this site with tech.erdelynet.com.  The supported information
for setting up Cygwin's OpenSSH distribution is 
/usr/doc/Cygwin/openssh-*.README.  It's the only source of information this
list will entertain questions about.

Thanks,


Larry Hall                              http://www.rfk.com
RFK Partners, Inc.                      (508) 893-9779 - RFK Office
838 Washington Street                   (508) 893-9889 - FAX
Holliston, MA 01746                     


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Dan Adams]

I tried the directions at the site, and when it did the chown system.system
/var/empty command. It errors out, saying that the user is unknown. It seems
to not want to start the service after that point. Any more suggestions.
Also does anyone know how to remove a service from the listong in Win2k once
it is no longer desired. I am hoping to change from telnet/ftp to ssh access
which means I would be able to get rid of the service of inetd that is in my
win2k control panel thing.

Dan Adams - dan@infochi.com
http://www.infochi.com


"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
> >Dan Adams" wrote
> >
> >> Does anyone know if there is either a script that will automate the
> >process
> >> of setting up an ssh server? Or is there a tutorial setup page?
> >
> >http://tech.erdelynet.com/cygwin-sshd.html
>
>
> And please follow-up with any questions generated from following the
> directions at this site with tech.erdelynet.com.  The supported
information
> for setting up Cygwin's OpenSSH distribution is
> /usr/doc/Cygwin/openssh-*.README.  It's the only source of information
this
> list will entertain questions about.
>
> Thanks,
>
>
> Larry Hall                              http://www.rfk.com
> RFK Partners, Inc.                      (508) 893-9779 - RFK Office
> 838 Washington Street                   (508) 893-9889 - FAX
> Holliston, MA 01746
>
>




--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Larry Hall]

OK, visit <http://cygwin.com/problems.html> and provide the requested info.
Also, send along (attached too) your /etc/passwd and /etc/group files.  The
actual transcript of your attempt to run chown would be helpful too.

cygrunsrv -E <service name> followed by cygrunsrv -R <service name> will
stop and remove a service.

Larry


At 06:04 PM 9/1/2003, Dan Adams you wrote:
>I tried the directions at the site, and when it did the chown system.system
>/var/empty command. It errors out, saying that the user is unknown. It seems
>to not want to start the service after that point. Any more suggestions.
>Also does anyone know how to remove a service from the listong in Win2k once
>it is no longer desired. I am hoping to change from telnet/ftp to ssh access
>which means I would be able to get rid of the service of inetd that is in my
>win2k control panel thing.
>
>Dan Adams - dan@infochi.com
>http://www.infochi.com
>
>
>"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
>> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
>> >Dan Adams" wrote
>> >
>> >> Does anyone know if there is either a script that will automate the
>> >process
>> >> of setting up an ssh server? Or is there a tutorial setup page?
>> >
>> >http://tech.erdelynet.com/cygwin-sshd.html
>>
>>
>> And please follow-up with any questions generated from following the
>> directions at this site with tech.erdelynet.com.  The supported
>information
>> for setting up Cygwin's OpenSSH distribution is
>> /usr/doc/Cygwin/openssh-*.README.  It's the only source of information
>this
>> list will entertain questions about.
>>
>> Thanks,
>>
>>
>> Larry Hall                              http://www.rfk.com
>> RFK Partners, Inc.                      (508) 893-9779 - RFK Office
>> 838 Washington Street                   (508) 893-9889 - FAX
>> Holliston, MA 01746
>>
>>
>
>
>
>
>--
>Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>Problem reports:       http://cygwin.com/problems.html
>Documentation:         http://cygwin.com/docs.html
>FAQ:                   http://cygwin.com/faq/


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Dan Adams]

Thanks for the comment about cygrunsrv and the method of removing service
from win2k That worked well

Since I have inetd working well. I have a telnet server and also a FTP
server, but neither is available outside of my firewall. I thought that I
would try and see if I could use the sshd server that I just setup via the
inetd thing. When I did this, I got an error message of:

ssh_exchange_identification: read: Connection reset by peer

What would this mean? This is the only error message that I have been
getting from the ssh deamon when I try and connect, and even before I ran
that setup script.

Dan Adams - dan@infochi.com
http://www.infochi.com


"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
news:5.1.0.14.0.20030901180444.01f69c90@127.0.0.1...
> OK, visit <http://cygwin.com/problems.html> and provide the requested
info.
> Also, send along (attached too) your /etc/passwd and /etc/group files.
The
> actual transcript of your attempt to run chown would be helpful too.
>
> cygrunsrv -E <service name> followed by cygrunsrv -R <service name> will
> stop and remove a service.
>
> Larry
>
>
> At 06:04 PM 9/1/2003, Dan Adams you wrote:
> >I tried the directions at the site, and when it did the chown
system.system
> >/var/empty command. It errors out, saying that the user is unknown. It
seems
> >to not want to start the service after that point. Any more suggestions.
> >Also does anyone know how to remove a service from the listong in Win2k
once
> >it is no longer desired. I am hoping to change from telnet/ftp to ssh
access
> >which means I would be able to get rid of the service of inetd that is in
my
> >win2k control panel thing.
> >
> >Dan Adams - dan@infochi.com
> >http://www.infochi.com
> >
> >
> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> >news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
> >> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
> >> >Dan Adams" wrote
> >> >
> >> >> Does anyone know if there is either a script that will automate the
> >> >process
> >> >> of setting up an ssh server? Or is there a tutorial setup page?
> >> >
> >> >http://tech.erdelynet.com/cygwin-sshd.html
> >>
> >>
> >> And please follow-up with any questions generated from following the
> >> directions at this site with tech.erdelynet.com.  The supported
> >information
> >> for setting up Cygwin's OpenSSH distribution is
> >> /usr/doc/Cygwin/openssh-*.README.  It's the only source of information
> >this
> >> list will entertain questions about.
> >>
> >> Thanks,
> >>
> >>
> >> Larry Hall                              http://www.rfk.com
> >> RFK Partners, Inc.                      (508) 893-9779 - RFK Office
> >> 838 Washington Street                   (508) 893-9889 - FAX
> >> Holliston, MA 01746
> >>
> >>
> >
> >
> >
> >
> >--
> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> >Problem reports:       http://cygwin.com/problems.html
> >Documentation:         http://cygwin.com/docs.html
> >FAQ:                   http://cygwin.com/faq/
>
>




--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Larry Hall]

You're not reaching the server.  The read of the basic version identification
is failing.  If the client and the server can't understand what version of
ssh is running on either end, they don't talk.  So you're not reaching the 
server through ssh.

Sorry I don't know much about setting up ssh under inetd.  Is there a reason
not to set it up as the documentation suggests?  I can vouch for things 
working that way.

Larry


At 06:38 PM 9/1/2003, Dan Adams you wrote:
>Thanks for the comment about cygrunsrv and the method of removing service
>from win2k That worked well
>
>Since I have inetd working well. I have a telnet server and also a FTP
>server, but neither is available outside of my firewall. I thought that I
>would try and see if I could use the sshd server that I just setup via the
>inetd thing. When I did this, I got an error message of:
>
>ssh_exchange_identification: read: Connection reset by peer
>
>What would this mean? This is the only error message that I have been
>getting from the ssh deamon when I try and connect, and even before I ran
>that setup script.
>
>Dan Adams - dan@infochi.com
>http://www.infochi.com
>
>
>"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>news:5.1.0.14.0.20030901180444.01f69c90@127.0.0.1...
>> OK, visit <http://cygwin.com/problems.html> and provide the requested
>info.
>> Also, send along (attached too) your /etc/passwd and /etc/group files.
>The
>> actual transcript of your attempt to run chown would be helpful too.
>>
>> cygrunsrv -E <service name> followed by cygrunsrv -R <service name> will
>> stop and remove a service.
>>
>> Larry
>>
>>
>> At 06:04 PM 9/1/2003, Dan Adams you wrote:
>> >I tried the directions at the site, and when it did the chown
>system.system
>> >/var/empty command. It errors out, saying that the user is unknown. It
>seems
>> >to not want to start the service after that point. Any more suggestions.
>> >Also does anyone know how to remove a service from the listong in Win2k
>once
>> >it is no longer desired. I am hoping to change from telnet/ftp to ssh
>access
>> >which means I would be able to get rid of the service of inetd that is in
>my
>> >win2k control panel thing.
>> >
>> >Dan Adams - dan@infochi.com
>> >http://www.infochi.com
>> >
>> >
>> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>> >news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
>> >> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
>> >> >Dan Adams" wrote
>> >> >
>> >> >> Does anyone know if there is either a script that will automate the
>> >> >process
>> >> >> of setting up an ssh server? Or is there a tutorial setup page?
>> >> >
>> >> >http://tech.erdelynet.com/cygwin-sshd.html
>> >>
>> >>
>> >> And please follow-up with any questions generated from following the
>> >> directions at this site with tech.erdelynet.com.  The supported
>> >information
>> >> for setting up Cygwin's OpenSSH distribution is
>> >> /usr/doc/Cygwin/openssh-*.README.  It's the only source of information
>> >this
>> >> list will entertain questions about.
>> >>
>> >> Thanks,
>> >>
>> >>
>> >> Larry Hall                              http://www.rfk.com
>> >> RFK Partners, Inc.                      (508) 893-9779 - RFK Office
>> >> 838 Washington Street                   (508) 893-9889 - FAX
>> >> Holliston, MA 01746
>> >>
>> >>
>> >
>> >
>> >
>> >
>> >--
>> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> >Problem reports:       http://cygwin.com/problems.html
>> >Documentation:         http://cygwin.com/docs.html
>> >FAQ:                   http://cygwin.com/faq/
>>
>>
>
>
>
>
>--
>Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>Problem reports:       http://cygwin.com/problems.html
>Documentation:         http://cygwin.com/docs.html
>FAQ:                   http://cygwin.com/faq/

--
Larry Hall                              http://www.rfk.com
RFK Partners, Inc.                      (508) 893-9779 - RFK Office
838 Washington Street                   (508) 893-9889 - FAX
Holliston, MA 01746                     


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Dan Adams]

You mentioned that it is not reaching the server through ssh, is there any
way I can find out where the problem occurs at? I am using a command line of
:
    ssh -p 422 localhost
to do this, I am not sure where in the networking the problem might lie at,
is there any way that I can find out, or assist you in finding out?

The reason I was trying it with inetd, partly because it mentioned it on the
website of yours, is because I have it working correctly for a couple of
other services that are part of cygwin.

One discrepancy I found between the website and the ssh-host-config file
that was installed on my machine is
file:
    chown system.system /var/empty
website
    chown system:system /var/empty

How should this be? If you notice the website has a colon on that line, the
file has a period on that line.

The website I am referring to is: http://tech.erdelynet.com/cygwin-sshd.html

-- 
Dan Adams - dan@infochi.com
http://www.infochi.com


"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
news:5.1.0.14.0.20030901200938.01f7e0c0@127.0.0.1...
> You're not reaching the server.  The read of the basic version
identification
> is failing.  If the client and the server can't understand what version of
> ssh is running on either end, they don't talk.  So you're not reaching the
> server through ssh.
>
> Sorry I don't know much about setting up ssh under inetd.  Is there a
reason
> not to set it up as the documentation suggests?  I can vouch for things
> working that way.
>
> Larry
>
>
> At 06:38 PM 9/1/2003, Dan Adams you wrote:
> >Thanks for the comment about cygrunsrv and the method of removing service
> >from win2k That worked well
> >
> >Since I have inetd working well. I have a telnet server and also a FTP
> >server, but neither is available outside of my firewall. I thought that I
> >would try and see if I could use the sshd server that I just setup via
the
> >inetd thing. When I did this, I got an error message of:
> >
> >ssh_exchange_identification: read: Connection reset by peer
> >
> >What would this mean? This is the only error message that I have been
> >getting from the ssh deamon when I try and connect, and even before I ran
> >that setup script.
> >
> >Dan Adams - dan@infochi.com
> >http://www.infochi.com
> >
> >
> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> >news:5.1.0.14.0.20030901180444.01f69c90@127.0.0.1...
> >> OK, visit <http://cygwin.com/problems.html> and provide the requested
> >info.
> >> Also, send along (attached too) your /etc/passwd and /etc/group files.
> >The
> >> actual transcript of your attempt to run chown would be helpful too.
> >>
> >> cygrunsrv -E <service name> followed by cygrunsrv -R <service name>
will
> >> stop and remove a service.
> >>
> >> Larry
> >>
> >>
> >> At 06:04 PM 9/1/2003, Dan Adams you wrote:
> >> >I tried the directions at the site, and when it did the chown
> >system.system
> >> >/var/empty command. It errors out, saying that the user is unknown. It
> >seems
> >> >to not want to start the service after that point. Any more
suggestions.
> >> >Also does anyone know how to remove a service from the listong in
Win2k
> >once
> >> >it is no longer desired. I am hoping to change from telnet/ftp to ssh
> >access
> >> >which means I would be able to get rid of the service of inetd that is
in
> >my
> >> >win2k control panel thing.
> >> >
> >> >Dan Adams - dan@infochi.com
> >> >http://www.infochi.com
> >> >
> >> >
> >> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> >> >news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
> >> >> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
> >> >> >Dan Adams" wrote
> >> >> >
> >> >> >> Does anyone know if there is either a script that will automate
the
> >> >> >process
> >> >> >> of setting up an ssh server? Or is there a tutorial setup page?
> >> >> >
> >> >> >http://tech.erdelynet.com/cygwin-sshd.html
> >> >>
> >> >>
> >> >> And please follow-up with any questions generated from following the
> >> >> directions at this site with tech.erdelynet.com.  The supported
> >> >information
> >> >> for setting up Cygwin's OpenSSH distribution is
> >> >> /usr/doc/Cygwin/openssh-*.README.  It's the only source of
information
> >> >this
> >> >> list will entertain questions about.
> >> >>
> >> >> Thanks,
> >> >>
> >> >>
> >> >> Larry Hall                              http://www.rfk.com
> >> >> RFK Partners, Inc.                      (508) 893-9779 - RFK Office
> >> >> 838 Washington Street                   (508) 893-9889 - FAX
> >> >> Holliston, MA 01746
> >> >>
> >> >>
> >> >
> >> >
> >> >
> >> >
> >> >--
> >> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> >> >Problem reports:       http://cygwin.com/problems.html
> >> >Documentation:         http://cygwin.com/docs.html
> >> >FAQ:                   http://cygwin.com/faq/
> >>
> >>
> >
> >
> >
> >
> >--
> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> >Problem reports:       http://cygwin.com/problems.html
> >Documentation:         http://cygwin.com/docs.html
> >FAQ:                   http://cygwin.com/faq/
>
> --
> Larry Hall                              http://www.rfk.com
> RFK Partners, Inc.                      (508) 893-9779 - RFK Office
> 838 Washington Street                   (508) 893-9889 - FAX
> Holliston, MA 01746
>
>




--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Dan Adams]

The error it gives me when I try to start the service, after using the
ssh-host-config command to make the service, and using the cygrunsrv -S sshd
command is:
cygrunsrv: Error starting a service: QueryServiceStatus:  Win32 error 1062:
The service has not been started.
I am not sure if this will help at all, but I figured it might.


-- 
Dan Adams - dan@infochi.com
http://www.infochi.com


"Dan Adams" <dan@infochi.com> wrote in message
news:bj0ruq$thn$1@sea.gmane.org...
> You mentioned that it is not reaching the server through ssh, is there any
> way I can find out where the problem occurs at? I am using a command line
of
> :
>     ssh -p 422 localhost
> to do this, I am not sure where in the networking the problem might lie
at,
> is there any way that I can find out, or assist you in finding out?
>
> The reason I was trying it with inetd, partly because it mentioned it on
the
> website of yours, is because I have it working correctly for a couple of
> other services that are part of cygwin.
>
> One discrepancy I found between the website and the ssh-host-config file
> that was installed on my machine is
> file:
>     chown system.system /var/empty
> website
>     chown system:system /var/empty
>
> How should this be? If you notice the website has a colon on that line,
the
> file has a period on that line.
>
> The website I am referring to is:
http://tech.erdelynet.com/cygwin-sshd.html
>
> -- 
> Dan Adams - dan@infochi.com
> http://www.infochi.com
>
>
> "Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> news:5.1.0.14.0.20030901200938.01f7e0c0@127.0.0.1...
> > You're not reaching the server.  The read of the basic version
> identification
> > is failing.  If the client and the server can't understand what version
of
> > ssh is running on either end, they don't talk.  So you're not reaching
the
> > server through ssh.
> >
> > Sorry I don't know much about setting up ssh under inetd.  Is there a
> reason
> > not to set it up as the documentation suggests?  I can vouch for things
> > working that way.
> >
> > Larry
> >
> >
> > At 06:38 PM 9/1/2003, Dan Adams you wrote:
> > >Thanks for the comment about cygrunsrv and the method of removing
service
> > >from win2k That worked well
> > >
> > >Since I have inetd working well. I have a telnet server and also a FTP
> > >server, but neither is available outside of my firewall. I thought that
I
> > >would try and see if I could use the sshd server that I just setup via
> the
> > >inetd thing. When I did this, I got an error message of:
> > >
> > >ssh_exchange_identification: read: Connection reset by peer
> > >
> > >What would this mean? This is the only error message that I have been
> > >getting from the ssh deamon when I try and connect, and even before I
ran
> > >that setup script.
> > >
> > >Dan Adams - dan@infochi.com
> > >http://www.infochi.com
> > >
> > >
> > >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> > >news:5.1.0.14.0.20030901180444.01f69c90@127.0.0.1...
> > >> OK, visit <http://cygwin.com/problems.html> and provide the requested
> > >info.
> > >> Also, send along (attached too) your /etc/passwd and /etc/group
files.
> > >The
> > >> actual transcript of your attempt to run chown would be helpful too.
> > >>
> > >> cygrunsrv -E <service name> followed by cygrunsrv -R <service name>
> will
> > >> stop and remove a service.
> > >>
> > >> Larry
> > >>
> > >>
> > >> At 06:04 PM 9/1/2003, Dan Adams you wrote:
> > >> >I tried the directions at the site, and when it did the chown
> > >system.system
> > >> >/var/empty command. It errors out, saying that the user is unknown.
It
> > >seems
> > >> >to not want to start the service after that point. Any more
> suggestions.
> > >> >Also does anyone know how to remove a service from the listong in
> Win2k
> > >once
> > >> >it is no longer desired. I am hoping to change from telnet/ftp to
ssh
> > >access
> > >> >which means I would be able to get rid of the service of inetd that
is
> in
> > >my
> > >> >win2k control panel thing.
> > >> >
> > >> >Dan Adams - dan@infochi.com
> > >> >http://www.infochi.com
> > >> >
> > >> >
> > >> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> > >> >news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
> > >> >> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
> > >> >> >Dan Adams" wrote
> > >> >> >
> > >> >> >> Does anyone know if there is either a script that will automate
> the
> > >> >> >process
> > >> >> >> of setting up an ssh server? Or is there a tutorial setup page?
> > >> >> >
> > >> >> >http://tech.erdelynet.com/cygwin-sshd.html
> > >> >>
> > >> >>
> > >> >> And please follow-up with any questions generated from following
the
> > >> >> directions at this site with tech.erdelynet.com.  The supported
> > >> >information
> > >> >> for setting up Cygwin's OpenSSH distribution is
> > >> >> /usr/doc/Cygwin/openssh-*.README.  It's the only source of
> information
> > >> >this
> > >> >> list will entertain questions about.
> > >> >>
> > >> >> Thanks,
> > >> >>
> > >> >>
> > >> >> Larry Hall                              http://www.rfk.com
> > >> >> RFK Partners, Inc.                      (508) 893-9779 - RFK
Office
> > >> >> 838 Washington Street                   (508) 893-9889 - FAX
> > >> >> Holliston, MA 01746
> > >> >>
> > >> >>
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >--
> > >> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> > >> >Problem reports:       http://cygwin.com/problems.html
> > >> >Documentation:         http://cygwin.com/docs.html
> > >> >FAQ:                   http://cygwin.com/faq/
> > >>
> > >>
> > >
> > >
> > >
> > >
> > >--
> > >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> > >Problem reports:       http://cygwin.com/problems.html
> > >Documentation:         http://cygwin.com/docs.html
> > >FAQ:                   http://cygwin.com/faq/
> >
> > --
> > Larry Hall                              http://www.rfk.com
> > RFK Partners, Inc.                      (508) 893-9779 - RFK Office
> > 838 Washington Street                   (508) 893-9889 - FAX
> > Holliston, MA 01746
> >
> >
>
>
>
>




--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Larry Hall]

OK, I'm not sure my efforts are paying off here.  I'd recommend again that
you visit <http://cygwin.com/problems.html>.  It's hard to figure things
without a basis of information.  However, you'll probably find looking
in the email archives helpful.  For instance, I found this with a simple
search:

<http://www.cygwin.com/ml/cygwin/2003-02/msg00522.html>

Seems to describe your situation to a tee, complete with solution.  Just 
one more reason not to use tech.erdelynet.com.  Seems your problem is a
common one when following the directions at this site.

If this doesn't solve your problem, I suggest uninstalling ssh and 
reinstalling.  Then, stay away from tech.erdelynet.com and just set 
things up as the Cygwin doc suggests.  Otherwise, bug tech.erdelynet.com
about it if you insist on using their advice.

Larry


At 09:40 PM 9/1/2003, Dan Adams you wrote:
>The error it gives me when I try to start the service, after using the
>ssh-host-config command to make the service, and using the cygrunsrv -S sshd
>command is:
>cygrunsrv: Error starting a service: QueryServiceStatus:  Win32 error 1062:
>The service has not been started.
>I am not sure if this will help at all, but I figured it might.
>
>
>-- 
>Dan Adams - dan@infochi.com
>http://www.infochi.com
>
>
>"Dan Adams" <dan@infochi.com> wrote in message
>news:bj0ruq$thn$1@sea.gmane.org...
>> You mentioned that it is not reaching the server through ssh, is there any
>> way I can find out where the problem occurs at? I am using a command line
>of
>> :
>>     ssh -p 422 localhost
>> to do this, I am not sure where in the networking the problem might lie
>at,
>> is there any way that I can find out, or assist you in finding out?
>>
>> The reason I was trying it with inetd, partly because it mentioned it on
>the
>> website of yours, is because I have it working correctly for a couple of
>> other services that are part of cygwin.
>>
>> One discrepancy I found between the website and the ssh-host-config file
>> that was installed on my machine is
>> file:
>>     chown system.system /var/empty
>> website
>>     chown system:system /var/empty
>>
>> How should this be? If you notice the website has a colon on that line,
>the
>> file has a period on that line.
>>
>> The website I am referring to is:
>http://tech.erdelynet.com/cygwin-sshd.html
>>
>> -- 
>> Dan Adams - dan@infochi.com
>> http://www.infochi.com
>>
>>
>> "Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>> news:5.1.0.14.0.20030901200938.01f7e0c0@127.0.0.1...
>> > You're not reaching the server.  The read of the basic version
>> identification
>> > is failing.  If the client and the server can't understand what version
>of
>> > ssh is running on either end, they don't talk.  So you're not reaching
>the
>> > server through ssh.
>> >
>> > Sorry I don't know much about setting up ssh under inetd.  Is there a
>> reason
>> > not to set it up as the documentation suggests?  I can vouch for things
>> > working that way.
>> >
>> > Larry
>> >
>> >
>> > At 06:38 PM 9/1/2003, Dan Adams you wrote:
>> > >Thanks for the comment about cygrunsrv and the method of removing
>service
>> > >from win2k That worked well
>> > >
>> > >Since I have inetd working well. I have a telnet server and also a FTP
>> > >server, but neither is available outside of my firewall. I thought that
>I
>> > >would try and see if I could use the sshd server that I just setup via
>> the
>> > >inetd thing. When I did this, I got an error message of:
>> > >
>> > >ssh_exchange_identification: read: Connection reset by peer
>> > >
>> > >What would this mean? This is the only error message that I have been
>> > >getting from the ssh deamon when I try and connect, and even before I
>ran
>> > >that setup script.
>> > >
>> > >Dan Adams - dan@infochi.com
>> > >http://www.infochi.com
>> > >
>> > >
>> > >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>> > >news:5.1.0.14.0.20030901180444.01f69c90@127.0.0.1...
>> > >> OK, visit <http://cygwin.com/problems.html> and provide the requested
>> > >info.
>> > >> Also, send along (attached too) your /etc/passwd and /etc/group
>files.
>> > >The
>> > >> actual transcript of your attempt to run chown would be helpful too.
>> > >>
>> > >> cygrunsrv -E <service name> followed by cygrunsrv -R <service name>
>> will
>> > >> stop and remove a service.
>> > >>
>> > >> Larry
>> > >>
>> > >>
>> > >> At 06:04 PM 9/1/2003, Dan Adams you wrote:
>> > >> >I tried the directions at the site, and when it did the chown
>> > >system.system
>> > >> >/var/empty command. It errors out, saying that the user is unknown.
>It
>> > >seems
>> > >> >to not want to start the service after that point. Any more
>> suggestions.
>> > >> >Also does anyone know how to remove a service from the listong in
>> Win2k
>> > >once
>> > >> >it is no longer desired. I am hoping to change from telnet/ftp to
>ssh
>> > >access
>> > >> >which means I would be able to get rid of the service of inetd that
>is
>> in
>> > >my
>> > >> >win2k control panel thing.
>> > >> >
>> > >> >Dan Adams - dan@infochi.com
>> > >> >http://www.infochi.com
>> > >> >
>> > >> >
>> > >> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>> > >> >news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
>> > >> >> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
>> > >> >> >Dan Adams" wrote
>> > >> >> >
>> > >> >> >> Does anyone know if there is either a script that will automate
>> the
>> > >> >> >process
>> > >> >> >> of setting up an ssh server? Or is there a tutorial setup page?
>> > >> >> >
>> > >> >> >http://tech.erdelynet.com/cygwin-sshd.html
>> > >> >>
>> > >> >>
>> > >> >> And please follow-up with any questions generated from following
>the
>> > >> >> directions at this site with tech.erdelynet.com.  The supported
>> > >> >information
>> > >> >> for setting up Cygwin's OpenSSH distribution is
>> > >> >> /usr/doc/Cygwin/openssh-*.README.  It's the only source of
>> information
>> > >> >this
>> > >> >> list will entertain questions about.
>> > >> >>
>> > >> >> Thanks,
>> > >> >>
>> > >> >>
>> > >> >> Larry Hall                              http://www.rfk.com
>> > >> >> RFK Partners, Inc.                      (508) 893-9779 - RFK
>Office
>> > >> >> 838 Washington Street                   (508) 893-9889 - FAX
>> > >> >> Holliston, MA 01746
>> > >> >>
>> > >> >>
>> > >> >
>> > >> >
>> > >> >
>> > >> >
>> > >> >--
>> > >> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> > >> >Problem reports:       http://cygwin.com/problems.html
>> > >> >Documentation:         http://cygwin.com/docs.html
>> > >> >FAQ:                   http://cygwin.com/faq/
>> > >>
>> > >>
>> > >
>> > >
>> > >
>> > >
>> > >--
>> > >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> > >Problem reports:       http://cygwin.com/problems.html
>> > >Documentation:         http://cygwin.com/docs.html
>> > >FAQ:                   http://cygwin.com/faq/
>> >
>> > --
>> > Larry Hall                              http://www.rfk.com
>> > RFK Partners, Inc.                      (508) 893-9779 - RFK Office
>> > 838 Washington Street                   (508) 893-9889 - FAX
>> > Holliston, MA 01746
>> >
>> >
>>
>>
>>
>>
>
>
>
>
>--
>Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>Problem reports:       http://cygwin.com/problems.html
>Documentation:         http://cygwin.com/docs.html
>FAQ:                   http://cygwin.com/faq/


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Dan Adams]

I am guessing this questioning might shift a little with my latest finding.
Also, I have attached the cygcheck file thing that was requested at that
website.

My latest finding is:
Could not load host key: /etc/ssh_host_key
Could not load host key: /etc/ssh_host_rsa_key
Could not load host key: /etc/ssh_host_dsa_key
Disabling protocol version 1. Could not load host key
Disabling protocol version 2. Could not load host key

I found this when looking in the sshd.log file that is in that directory.
Relating to the permissions that that gentleman mentioned in his post on
this list, those directories (this may not be good though) have the
permissions for the system account. Is there anything that speaks about how
to create these keys?

Dan

"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
news:5.1.0.14.0.20030901214533.01f6a988@127.0.0.1...
> OK, I'm not sure my efforts are paying off here.  I'd recommend again that
> you visit <http://cygwin.com/problems.html>.  It's hard to figure things
> without a basis of information.  However, you'll probably find looking
> in the email archives helpful.  For instance, I found this with a simple
> search:
>
> <http://www.cygwin.com/ml/cygwin/2003-02/msg00522.html>
>
> Seems to describe your situation to a tee, complete with solution.  Just
> one more reason not to use tech.erdelynet.com.  Seems your problem is a
> common one when following the directions at this site.
>
> If this doesn't solve your problem, I suggest uninstalling ssh and
> reinstalling.  Then, stay away from tech.erdelynet.com and just set
> things up as the Cygwin doc suggests.  Otherwise, bug tech.erdelynet.com
> about it if you insist on using their advice.
>
> Larry
>
>
> At 09:40 PM 9/1/2003, Dan Adams you wrote:
> >The error it gives me when I try to start the service, after using the
> >ssh-host-config command to make the service, and using the cygrunsrv -S
sshd
> >command is:
> >cygrunsrv: Error starting a service: QueryServiceStatus:  Win32 error
1062:
> >The service has not been started.
> >I am not sure if this will help at all, but I figured it might.
> >
> >
> >-- 
> >Dan Adams - dan@infochi.com
> >http://www.infochi.com
> >
> >
> >"Dan Adams" <dan@infochi.com> wrote in message
> >news:bj0ruq$thn$1@sea.gmane.org...
> >> You mentioned that it is not reaching the server through ssh, is there
any
> >> way I can find out where the problem occurs at? I am using a command
line
> >of
> >> :
> >>     ssh -p 422 localhost
> >> to do this, I am not sure where in the networking the problem might lie
> >at,
> >> is there any way that I can find out, or assist you in finding out?
> >>
> >> The reason I was trying it with inetd, partly because it mentioned it
on
> >the
> >> website of yours, is because I have it working correctly for a couple
of
> >> other services that are part of cygwin.
> >>
> >> One discrepancy I found between the website and the ssh-host-config
file
> >> that was installed on my machine is
> >> file:
> >>     chown system.system /var/empty
> >> website
> >>     chown system:system /var/empty
> >>
> >> How should this be? If you notice the website has a colon on that line,
> >the
> >> file has a period on that line.
> >>
> >> The website I am referring to is:
> >http://tech.erdelynet.com/cygwin-sshd.html
> >>
> >> -- 
> >> Dan Adams - dan@infochi.com
> >> http://www.infochi.com
> >>
> >>
> >> "Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> >> news:5.1.0.14.0.20030901200938.01f7e0c0@127.0.0.1...
> >> > You're not reaching the server.  The read of the basic version
> >> identification
> >> > is failing.  If the client and the server can't understand what
version
> >of
> >> > ssh is running on either end, they don't talk.  So you're not
reaching
> >the
> >> > server through ssh.
> >> >
> >> > Sorry I don't know much about setting up ssh under inetd.  Is there a
> >> reason
> >> > not to set it up as the documentation suggests?  I can vouch for
things
> >> > working that way.
> >> >
> >> > Larry
> >> >
> >> >
> >> > At 06:38 PM 9/1/2003, Dan Adams you wrote:
> >> > >Thanks for the comment about cygrunsrv and the method of removing
> >service
> >> > >from win2k That worked well
> >> > >
> >> > >Since I have inetd working well. I have a telnet server and also a
FTP
> >> > >server, but neither is available outside of my firewall. I thought
that
> >I
> >> > >would try and see if I could use the sshd server that I just setup
via
> >> the
> >> > >inetd thing. When I did this, I got an error message of:
> >> > >
> >> > >ssh_exchange_identification: read: Connection reset by peer
> >> > >
> >> > >What would this mean? This is the only error message that I have
been
> >> > >getting from the ssh deamon when I try and connect, and even before
I
> >ran
> >> > >that setup script.
> >> > >
> >> > >Dan Adams - dan@infochi.com
> >> > >http://www.infochi.com
> >> > >
> >> > >
> >> > >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> >> > >news:5.1.0.14.0.20030901180444.01f69c90@127.0.0.1...
> >> > >> OK, visit <http://cygwin.com/problems.html> and provide the
requested
> >> > >info.
> >> > >> Also, send along (attached too) your /etc/passwd and /etc/group
> >files.
> >> > >The
> >> > >> actual transcript of your attempt to run chown would be helpful
too.
> >> > >>
> >> > >> cygrunsrv -E <service name> followed by cygrunsrv -R <service
name>
> >> will
> >> > >> stop and remove a service.
> >> > >>
> >> > >> Larry
> >> > >>
> >> > >>
> >> > >> At 06:04 PM 9/1/2003, Dan Adams you wrote:
> >> > >> >I tried the directions at the site, and when it did the chown
> >> > >system.system
> >> > >> >/var/empty command. It errors out, saying that the user is
unknown.
> >It
> >> > >seems
> >> > >> >to not want to start the service after that point. Any more
> >> suggestions.
> >> > >> >Also does anyone know how to remove a service from the listong in
> >> Win2k
> >> > >once
> >> > >> >it is no longer desired. I am hoping to change from telnet/ftp to
> >ssh
> >> > >access
> >> > >> >which means I would be able to get rid of the service of inetd
that
> >is
> >> in
> >> > >my
> >> > >> >win2k control panel thing.
> >> > >> >
> >> > >> >Dan Adams - dan@infochi.com
> >> > >> >http://www.infochi.com
> >> > >> >
> >> > >> >
> >> > >> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> >> > >> >news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
> >> > >> >> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
> >> > >> >> >Dan Adams" wrote
> >> > >> >> >
> >> > >> >> >> Does anyone know if there is either a script that will
automate
> >> the
> >> > >> >> >process
> >> > >> >> >> of setting up an ssh server? Or is there a tutorial setup
page?
> >> > >> >> >
> >> > >> >> >http://tech.erdelynet.com/cygwin-sshd.html
> >> > >> >>
> >> > >> >>
> >> > >> >> And please follow-up with any questions generated from
following
> >the
> >> > >> >> directions at this site with tech.erdelynet.com.  The supported
> >> > >> >information
> >> > >> >> for setting up Cygwin's OpenSSH distribution is
> >> > >> >> /usr/doc/Cygwin/openssh-*.README.  It's the only source of
> >> information
> >> > >> >this
> >> > >> >> list will entertain questions about.
> >> > >> >>
> >> > >> >> Thanks,
> >> > >> >>
> >> > >> >>
> >> > >> >> Larry Hall                              http://www.rfk.com
> >> > >> >> RFK Partners, Inc.                      (508) 893-9779 - RFK
> >Office
> >> > >> >> 838 Washington Street                   (508) 893-9889 - FAX
> >> > >> >> Holliston, MA 01746
> >> > >> >>
> >> > >> >>
> >> > >> >
> >> > >> >
> >> > >> >
> >> > >> >
> >> > >> >--
> >> > >> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> >> > >> >Problem reports:       http://cygwin.com/problems.html
> >> > >> >Documentation:         http://cygwin.com/docs.html
> >> > >> >FAQ:                   http://cygwin.com/faq/
> >> > >>
> >> > >>
> >> > >
> >> > >
> >> > >
> >> > >
> >> > >--
> >> > >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> >> > >Problem reports:       http://cygwin.com/problems.html
> >> > >Documentation:         http://cygwin.com/docs.html
> >> > >FAQ:                   http://cygwin.com/faq/
> >> >
> >> > --
> >> > Larry Hall                              http://www.rfk.com
> >> > RFK Partners, Inc.                      (508) 893-9779 - RFK Office
> >> > 838 Washington Street                   (508) 893-9889 - FAX
> >> > Holliston, MA 01746
> >> >
> >> >
> >>
> >>
> >>
> >>
> >
> >
> >
> >
> >--
> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> >Problem reports:       http://cygwin.com/problems.html
> >Documentation:         http://cygwin.com/docs.html
> >FAQ:                   http://cygwin.com/faq/
>
>


begin 666 cygcheck.out
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B:"!T;R!S964@:&5L<"!A8F]U="!E86-H('-E8W1I;VX-"@``
`
end



--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Larry Hall]

ssh-host-config creates /etc/ssh_host_key*.

 From your cygcheck output:

  653k 2003/07/22 C:\Program Files\mysql\bin\cygwinb19.dll - os=4.0 img=1.0 sys=4.0
                  "cygwinb19.dll" v0.0 ts=1998/7/15 18:50

This will is trouble waiting to happen.  Get rid of this DLL and update
mysql as required.

Larry


At 10:25 PM 9/1/2003, Dan Adams you wrote:



>I am guessing this questioning might shift a little with my latest finding.
>Also, I have attached the cygcheck file thing that was requested at that
>website.
>
>My latest finding is:
>Could not load host key: /etc/ssh_host_key
>Could not load host key: /etc/ssh_host_rsa_key
>Could not load host key: /etc/ssh_host_dsa_key
>Disabling protocol version 1. Could not load host key
>Disabling protocol version 2. Could not load host key
>
>I found this when looking in the sshd.log file that is in that directory.
>Relating to the permissions that that gentleman mentioned in his post on
>this list, those directories (this may not be good though) have the
>permissions for the system account. Is there anything that speaks about how
>to create these keys?
>
>Dan
>
>"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>news:5.1.0.14.0.20030901214533.01f6a988@127.0.0.1...
>> OK, I'm not sure my efforts are paying off here.  I'd recommend again that
>> you visit <http://cygwin.com/problems.html>.  It's hard to figure things
>> without a basis of information.  However, you'll probably find looking
>> in the email archives helpful.  For instance, I found this with a simple
>> search:
>>
>> <http://www.cygwin.com/ml/cygwin/2003-02/msg00522.html>
>>
>> Seems to describe your situation to a tee, complete with solution.  Just
>> one more reason not to use tech.erdelynet.com.  Seems your problem is a
>> common one when following the directions at this site.
>>
>> If this doesn't solve your problem, I suggest uninstalling ssh and
>> reinstalling.  Then, stay away from tech.erdelynet.com and just set
>> things up as the Cygwin doc suggests.  Otherwise, bug tech.erdelynet.com
>> about it if you insist on using their advice.
>>
>> Larry
>>
>>
>> At 09:40 PM 9/1/2003, Dan Adams you wrote:
>> >The error it gives me when I try to start the service, after using the
>> >ssh-host-config command to make the service, and using the cygrunsrv -S
>sshd
>> >command is:
>> >cygrunsrv: Error starting a service: QueryServiceStatus:  Win32 error
>1062:
>> >The service has not been started.
>> >I am not sure if this will help at all, but I figured it might.
>> >
>> >
>> >-- 
>> >Dan Adams - dan@infochi.com
>> >http://www.infochi.com
>> >
>> >
>> >"Dan Adams" <dan@infochi.com> wrote in message
>> >news:bj0ruq$thn$1@sea.gmane.org...
>> >> You mentioned that it is not reaching the server through ssh, is there
>any
>> >> way I can find out where the problem occurs at? I am using a command
>line
>> >of
>> >> :
>> >>     ssh -p 422 localhost
>> >> to do this, I am not sure where in the networking the problem might lie
>> >at,
>> >> is there any way that I can find out, or assist you in finding out?
>> >>
>> >> The reason I was trying it with inetd, partly because it mentioned it
>on
>> >the
>> >> website of yours, is because I have it working correctly for a couple
>of
>> >> other services that are part of cygwin.
>> >>
>> >> One discrepancy I found between the website and the ssh-host-config
>file
>> >> that was installed on my machine is
>> >> file:
>> >>     chown system.system /var/empty
>> >> website
>> >>     chown system:system /var/empty
>> >>
>> >> How should this be? If you notice the website has a colon on that line,
>> >the
>> >> file has a period on that line.
>> >>
>> >> The website I am referring to is:
>> >http://tech.erdelynet.com/cygwin-sshd.html
>> >>
>> >> -- 
>> >> Dan Adams - dan@infochi.com
>> >> http://www.infochi.com
>> >>
>> >>
>> >> "Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>> >> news:5.1.0.14.0.20030901200938.01f7e0c0@127.0.0.1...
>> >> > You're not reaching the server.  The read of the basic version
>> >> identification
>> >> > is failing.  If the client and the server can't understand what
>version
>> >of
>> >> > ssh is running on either end, they don't talk.  So you're not
>reaching
>> >the
>> >> > server through ssh.
>> >> >
>> >> > Sorry I don't know much about setting up ssh under inetd.  Is there a
>> >> reason
>> >> > not to set it up as the documentation suggests?  I can vouch for
>things
>> >> > working that way.
>> >> >
>> >> > Larry
>> >> >
>> >> >
>> >> > At 06:38 PM 9/1/2003, Dan Adams you wrote:
>> >> > >Thanks for the comment about cygrunsrv and the method of removing
>> >service
>> >> > >from win2k That worked well
>> >> > >
>> >> > >Since I have inetd working well. I have a telnet server and also a
>FTP
>> >> > >server, but neither is available outside of my firewall. I thought
>that
>> >I
>> >> > >would try and see if I could use the sshd server that I just setup
>via
>> >> the
>> >> > >inetd thing. When I did this, I got an error message of:
>> >> > >
>> >> > >ssh_exchange_identification: read: Connection reset by peer
>> >> > >
>> >> > >What would this mean? This is the only error message that I have
>been
>> >> > >getting from the ssh deamon when I try and connect, and even before
>I
>> >ran
>> >> > >that setup script.
>> >> > >
>> >> > >Dan Adams - dan@infochi.com
>> >> > >http://www.infochi.com
>> >> > >
>> >> > >
>> >> > >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>> >> > >news:5.1.0.14.0.20030901180444.01f69c90@127.0.0.1...
>> >> > >> OK, visit <http://cygwin.com/problems.html> and provide the
>requested
>> >> > >info.
>> >> > >> Also, send along (attached too) your /etc/passwd and /etc/group
>> >files.
>> >> > >The
>> >> > >> actual transcript of your attempt to run chown would be helpful
>too.
>> >> > >>
>> >> > >> cygrunsrv -E <service name> followed by cygrunsrv -R <service
>name>
>> >> will
>> >> > >> stop and remove a service.
>> >> > >>
>> >> > >> Larry
>> >> > >>
>> >> > >>
>> >> > >> At 06:04 PM 9/1/2003, Dan Adams you wrote:
>> >> > >> >I tried the directions at the site, and when it did the chown
>> >> > >system.system
>> >> > >> >/var/empty command. It errors out, saying that the user is
>unknown.
>> >It
>> >> > >seems
>> >> > >> >to not want to start the service after that point. Any more
>> >> suggestions.
>> >> > >> >Also does anyone know how to remove a service from the listong in
>> >> Win2k
>> >> > >once
>> >> > >> >it is no longer desired. I am hoping to change from telnet/ftp to
>> >ssh
>> >> > >access
>> >> > >> >which means I would be able to get rid of the service of inetd
>that
>> >is
>> >> in
>> >> > >my
>> >> > >> >win2k control panel thing.
>> >> > >> >
>> >> > >> >Dan Adams - dan@infochi.com
>> >> > >> >http://www.infochi.com
>> >> > >> >
>> >> > >> >
>> >> > >> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>> >> > >> >news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
>> >> > >> >> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
>> >> > >> >> >Dan Adams" wrote
>> >> > >> >> >
>> >> > >> >> >> Does anyone know if there is either a script that will
>automate
>> >> the
>> >> > >> >> >process
>> >> > >> >> >> of setting up an ssh server? Or is there a tutorial setup
>page?
>> >> > >> >> >
>> >> > >> >> >http://tech.erdelynet.com/cygwin-sshd.html
>> >> > >> >>
>> >> > >> >>
>> >> > >> >> And please follow-up with any questions generated from
>following
>> >the
>> >> > >> >> directions at this site with tech.erdelynet.com.  The supported
>> >> > >> >information
>> >> > >> >> for setting up Cygwin's OpenSSH distribution is
>> >> > >> >> /usr/doc/Cygwin/openssh-*.README.  It's the only source of
>> >> information
>> >> > >> >this
>> >> > >> >> list will entertain questions about.
>> >> > >> >>
>> >> > >> >> Thanks,
>> >> > >> >>
>> >> > >> >>
>> >> > >> >> Larry Hall                              http://www.rfk.com
>> >> > >> >> RFK Partners, Inc.                      (508) 893-9779 - RFK
>> >Office
>> >> > >> >> 838 Washington Street                   (508) 893-9889 - FAX
>> >> > >> >> Holliston, MA 01746
>> >> > >> >>
>> >> > >> >>
>> >> > >> >
>> >> > >> >
>> >> > >> >
>> >> > >> >
>> >> > >> >--
>> >> > >> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> >> > >> >Problem reports:       http://cygwin.com/problems.html
>> >> > >> >Documentation:         http://cygwin.com/docs.html
>> >> > >> >FAQ:                   http://cygwin.com/faq/
>> >> > >>
>> >> > >>
>> >> > >
>> >> > >
>> >> > >
>> >> > >
>> >> > >--
>> >> > >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> >> > >Problem reports:       http://cygwin.com/problems.html
>> >> > >Documentation:         http://cygwin.com/docs.html
>> >> > >FAQ:                   http://cygwin.com/faq/
>> >> >
>> >> > --
>> >> > Larry Hall                              http://www.rfk.com
>> >> > RFK Partners, Inc.                      (508) 893-9779 - RFK Office
>> >> > 838 Washington Street                   (508) 893-9889 - FAX
>> >> > Holliston, MA 01746
>> >> >
>> >> >
>> >>
>> >>
>> >>
>> >>
>> >
>> >
>> >
>> >
>> >--
>> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> >Problem reports:       http://cygwin.com/problems.html
>> >Documentation:         http://cygwin.com/docs.html
>> >FAQ:                   http://cygwin.com/faq/
>>
>>
>
>
>
>
>
>
>--
>Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>Problem reports:       http://cygwin.com/problems.html
>Documentation:         http://cygwin.com/docs.html
>FAQ:                   http://cygwin.com/faq/

--
Larry Hall                              http://www.rfk.com
RFK Partners, Inc.                      (508) 893-9779 - RFK Office
838 Washington Street                   (508) 893-9889 - FAX
Holliston, MA 01746                     


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Dan Adams]

I followed both of those suggestions. I retried that script and it seems to
generate the key files each time it is run now. As far as that mySQL thing,
I renamed that dll file and will use another program temporarily, until I
can figure this thing out.

Once I did those two things, I still see an error that looks the same,
although the contents of the sshd.log file is now:
    /var/empty must be owned by root and not group or world-writable.

My main trouble with this is that I seem to be having trouble getting the
permissions for that directory like it says, I can get it chmod'ed to 744
easily, but I can't seem to get its ownership to root or system either one.
I am using a windows 2000 machine, although that may have been in my
cygcheck file that I sent. Does anyone have a suggestion on how to get this
permission thing set.

Dan


"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
news:5.1.0.14.0.20030901223001.01f810c8@127.0.0.1...
> ssh-host-config creates /etc/ssh_host_key*.
>
>  From your cygcheck output:
>
>   653k 2003/07/22 C:\Program Files\mysql\bin\cygwinb19.dll - os=4.0
img=1.0 sys=4.0
>                   "cygwinb19.dll" v0.0 ts=1998/7/15 18:50
>
> This will is trouble waiting to happen.  Get rid of this DLL and update
> mysql as required.
>
> Larry
>
>
> At 10:25 PM 9/1/2003, Dan Adams you wrote:
>
>
>
> >I am guessing this questioning might shift a little with my latest
finding.
> >Also, I have attached the cygcheck file thing that was requested at that
> >website.
> >
> >My latest finding is:
> >Could not load host key: /etc/ssh_host_key
> >Could not load host key: /etc/ssh_host_rsa_key
> >Could not load host key: /etc/ssh_host_dsa_key
> >Disabling protocol version 1. Could not load host key
> >Disabling protocol version 2. Could not load host key
> >
> >I found this when looking in the sshd.log file that is in that directory.
> >Relating to the permissions that that gentleman mentioned in his post on
> >this list, those directories (this may not be good though) have the
> >permissions for the system account. Is there anything that speaks about
how
> >to create these keys?
> >
> >Dan
> >
> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> >news:5.1.0.14.0.20030901214533.01f6a988@127.0.0.1...
> >> OK, I'm not sure my efforts are paying off here.  I'd recommend again
that
> >> you visit <http://cygwin.com/problems.html>.  It's hard to figure
things
> >> without a basis of information.  However, you'll probably find looking
> >> in the email archives helpful.  For instance, I found this with a
simple
> >> search:
> >>
> >> <http://www.cygwin.com/ml/cygwin/2003-02/msg00522.html>
> >>
> >> Seems to describe your situation to a tee, complete with solution.
Just
> >> one more reason not to use tech.erdelynet.com.  Seems your problem is a
> >> common one when following the directions at this site.
> >>
> >> If this doesn't solve your problem, I suggest uninstalling ssh and
> >> reinstalling.  Then, stay away from tech.erdelynet.com and just set
> >> things up as the Cygwin doc suggests.  Otherwise, bug
tech.erdelynet.com
> >> about it if you insist on using their advice.
> >>
> >> Larry
> >>
> >>
> >> At 09:40 PM 9/1/2003, Dan Adams you wrote:
> >> >The error it gives me when I try to start the service, after using the
> >> >ssh-host-config command to make the service, and using the
cygrunsrv -S
> >sshd
> >> >command is:
> >> >cygrunsrv: Error starting a service: QueryServiceStatus:  Win32 error
> >1062:
> >> >The service has not been started.
> >> >I am not sure if this will help at all, but I figured it might.
> >> >
> >> >
> >> >-- 
> >> >Dan Adams - dan@infochi.com
> >> >http://www.infochi.com
> >> >
> >> >
> >> >"Dan Adams" <dan@infochi.com> wrote in message
> >> >news:bj0ruq$thn$1@sea.gmane.org...
> >> >> You mentioned that it is not reaching the server through ssh, is
there
> >any
> >> >> way I can find out where the problem occurs at? I am using a command
> >line
> >> >of
> >> >> :
> >> >>     ssh -p 422 localhost
> >> >> to do this, I am not sure where in the networking the problem might
lie
> >> >at,
> >> >> is there any way that I can find out, or assist you in finding out?
> >> >>
> >> >> The reason I was trying it with inetd, partly because it mentioned
it
> >on
> >> >the
> >> >> website of yours, is because I have it working correctly for a
couple
> >of
> >> >> other services that are part of cygwin.
> >> >>
> >> >> One discrepancy I found between the website and the ssh-host-config
> >file
> >> >> that was installed on my machine is
> >> >> file:
> >> >>     chown system.system /var/empty
> >> >> website
> >> >>     chown system:system /var/empty
> >> >>
> >> >> How should this be? If you notice the website has a colon on that
line,
> >> >the
> >> >> file has a period on that line.
> >> >>
> >> >> The website I am referring to is:
> >> >http://tech.erdelynet.com/cygwin-sshd.html
> >> >>
> >> >> -- 
> >> >> Dan Adams - dan@infochi.com
> >> >> http://www.infochi.com
> >> >>
> >> >>
> >> >> "Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> >> >> news:5.1.0.14.0.20030901200938.01f7e0c0@127.0.0.1...
> >> >> > You're not reaching the server.  The read of the basic version
> >> >> identification
> >> >> > is failing.  If the client and the server can't understand what
> >version
> >> >of
> >> >> > ssh is running on either end, they don't talk.  So you're not
> >reaching
> >> >the
> >> >> > server through ssh.
> >> >> >
> >> >> > Sorry I don't know much about setting up ssh under inetd.  Is
there a
> >> >> reason
> >> >> > not to set it up as the documentation suggests?  I can vouch for
> >things
> >> >> > working that way.
> >> >> >
> >> >> > Larry
> >> >> >
> >> >> >
> >> >> > At 06:38 PM 9/1/2003, Dan Adams you wrote:
> >> >> > >Thanks for the comment about cygrunsrv and the method of removing
> >> >service
> >> >> > >from win2k That worked well
> >> >> > >
> >> >> > >Since I have inetd working well. I have a telnet server and also
a
> >FTP
> >> >> > >server, but neither is available outside of my firewall. I
thought
> >that
> >> >I
> >> >> > >would try and see if I could use the sshd server that I just
setup
> >via
> >> >> the
> >> >> > >inetd thing. When I did this, I got an error message of:
> >> >> > >
> >> >> > >ssh_exchange_identification: read: Connection reset by peer
> >> >> > >
> >> >> > >What would this mean? This is the only error message that I have
> >been
> >> >> > >getting from the ssh deamon when I try and connect, and even
before
> >I
> >> >ran
> >> >> > >that setup script.
> >> >> > >
> >> >> > >Dan Adams - dan@infochi.com
> >> >> > >http://www.infochi.com
> >> >> > >
> >> >> > >
> >> >> > >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> >> >> > >news:5.1.0.14.0.20030901180444.01f69c90@127.0.0.1...
> >> >> > >> OK, visit <http://cygwin.com/problems.html> and provide the
> >requested
> >> >> > >info.
> >> >> > >> Also, send along (attached too) your /etc/passwd and /etc/group
> >> >files.
> >> >> > >The
> >> >> > >> actual transcript of your attempt to run chown would be helpful
> >too.
> >> >> > >>
> >> >> > >> cygrunsrv -E <service name> followed by cygrunsrv -R <service
> >name>
> >> >> will
> >> >> > >> stop and remove a service.
> >> >> > >>
> >> >> > >> Larry
> >> >> > >>
> >> >> > >>
> >> >> > >> At 06:04 PM 9/1/2003, Dan Adams you wrote:
> >> >> > >> >I tried the directions at the site, and when it did the chown
> >> >> > >system.system
> >> >> > >> >/var/empty command. It errors out, saying that the user is
> >unknown.
> >> >It
> >> >> > >seems
> >> >> > >> >to not want to start the service after that point. Any more
> >> >> suggestions.
> >> >> > >> >Also does anyone know how to remove a service from the listong
in
> >> >> Win2k
> >> >> > >once
> >> >> > >> >it is no longer desired. I am hoping to change from telnet/ftp
to
> >> >ssh
> >> >> > >access
> >> >> > >> >which means I would be able to get rid of the service of inetd
> >that
> >> >is
> >> >> in
> >> >> > >my
> >> >> > >> >win2k control panel thing.
> >> >> > >> >
> >> >> > >> >Dan Adams - dan@infochi.com
> >> >> > >> >http://www.infochi.com
> >> >> > >> >
> >> >> > >> >
> >> >> > >> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
> >> >> > >> >news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
> >> >> > >> >> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
> >> >> > >> >> >Dan Adams" wrote
> >> >> > >> >> >
> >> >> > >> >> >> Does anyone know if there is either a script that will
> >automate
> >> >> the
> >> >> > >> >> >process
> >> >> > >> >> >> of setting up an ssh server? Or is there a tutorial setup
> >page?
> >> >> > >> >> >
> >> >> > >> >> >http://tech.erdelynet.com/cygwin-sshd.html
> >> >> > >> >>
> >> >> > >> >>
> >> >> > >> >> And please follow-up with any questions generated from
> >following
> >> >the
> >> >> > >> >> directions at this site with tech.erdelynet.com.  The
supported
> >> >> > >> >information
> >> >> > >> >> for setting up Cygwin's OpenSSH distribution is
> >> >> > >> >> /usr/doc/Cygwin/openssh-*.README.  It's the only source of
> >> >> information
> >> >> > >> >this
> >> >> > >> >> list will entertain questions about.
> >> >> > >> >>
> >> >> > >> >> Thanks,
> >> >> > >> >>
> >> >> > >> >>
> >> >> > >> >> Larry Hall                              http://www.rfk.com
> >> >> > >> >> RFK Partners, Inc.                      (508) 893-9779 - RFK
> >> >Office
> >> >> > >> >> 838 Washington Street                   (508) 893-9889 - FAX
> >> >> > >> >> Holliston, MA 01746
> >> >> > >> >>
> >> >> > >> >>
> >> >> > >> >
> >> >> > >> >
> >> >> > >> >
> >> >> > >> >
> >> >> > >> >--
> >> >> > >> >Unsubscribe info:
http://cygwin.com/ml/#unsubscribe-simple
> >> >> > >> >Problem reports:       http://cygwin.com/problems.html
> >> >> > >> >Documentation:         http://cygwin.com/docs.html
> >> >> > >> >FAQ:                   http://cygwin.com/faq/
> >> >> > >>
> >> >> > >>
> >> >> > >
> >> >> > >
> >> >> > >
> >> >> > >
> >> >> > >--
> >> >> > >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> >> >> > >Problem reports:       http://cygwin.com/problems.html
> >> >> > >Documentation:         http://cygwin.com/docs.html
> >> >> > >FAQ:                   http://cygwin.com/faq/
> >> >> >
> >> >> > --
> >> >> > Larry Hall                              http://www.rfk.com
> >> >> > RFK Partners, Inc.                      (508) 893-9779 - RFK
Office
> >> >> > 838 Washington Street                   (508) 893-9889 - FAX
> >> >> > Holliston, MA 01746
> >> >> >
> >> >> >
> >> >>
> >> >>
> >> >>
> >> >>
> >> >
> >> >
> >> >
> >> >
> >> >--
> >> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> >> >Problem reports:       http://cygwin.com/problems.html
> >> >Documentation:         http://cygwin.com/docs.html
> >> >FAQ:                   http://cygwin.com/faq/
> >>
> >>
> >
> >
> >
> >
> >
> >
> >--
> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> >Problem reports:       http://cygwin.com/problems.html
> >Documentation:         http://cygwin.com/docs.html
> >FAQ:                   http://cygwin.com/faq/
>
> --
> Larry Hall                              http://www.rfk.com
> RFK Partners, Inc.                      (508) 893-9779 - RFK Office
> 838 Washington Street                   (508) 893-9889 - FAX
> Holliston, MA 01746
>
>




--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Larry Hall]

Again, please attach your '/etc/passwd' and '/etc/group' files and show
a transcript of your attempt to set /var/empty persmissions along with
the output from 'ls -l /var'.

Larry


At 11:43 PM 9/1/2003, Dan Adams you wrote:
>I followed both of those suggestions. I retried that script and it seems to
>generate the key files each time it is run now. As far as that mySQL thing,
>I renamed that dll file and will use another program temporarily, until I
>can figure this thing out.
>
>Once I did those two things, I still see an error that looks the same,
>although the contents of the sshd.log file is now:
>    /var/empty must be owned by root and not group or world-writable.
>
>My main trouble with this is that I seem to be having trouble getting the
>permissions for that directory like it says, I can get it chmod'ed to 744
>easily, but I can't seem to get its ownership to root or system either one.
>I am using a windows 2000 machine, although that may have been in my
>cygcheck file that I sent. Does anyone have a suggestion on how to get this
>permission thing set.
>
>Dan
>
>
>"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>news:5.1.0.14.0.20030901223001.01f810c8@127.0.0.1...
>> ssh-host-config creates /etc/ssh_host_key*.
>>
>>  From your cygcheck output:
>>
>>   653k 2003/07/22 C:\Program Files\mysql\bin\cygwinb19.dll - os=4.0
>img=1.0 sys=4.0
>>                   "cygwinb19.dll" v0.0 ts=1998/7/15 18:50
>>
>> This will is trouble waiting to happen.  Get rid of this DLL and update
>> mysql as required.
>>
>> Larry
>>
>>
>> At 10:25 PM 9/1/2003, Dan Adams you wrote:
>>
>>
>>
>> >I am guessing this questioning might shift a little with my latest
>finding.
>> >Also, I have attached the cygcheck file thing that was requested at that
>> >website.
>> >
>> >My latest finding is:
>> >Could not load host key: /etc/ssh_host_key
>> >Could not load host key: /etc/ssh_host_rsa_key
>> >Could not load host key: /etc/ssh_host_dsa_key
>> >Disabling protocol version 1. Could not load host key
>> >Disabling protocol version 2. Could not load host key
>> >
>> >I found this when looking in the sshd.log file that is in that directory.
>> >Relating to the permissions that that gentleman mentioned in his post on
>> >this list, those directories (this may not be good though) have the
>> >permissions for the system account. Is there anything that speaks about
>how
>> >to create these keys?
>> >
>> >Dan
>> >
>> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>> >news:5.1.0.14.0.20030901214533.01f6a988@127.0.0.1...
>> >> OK, I'm not sure my efforts are paying off here.  I'd recommend again
>that
>> >> you visit <http://cygwin.com/problems.html>.  It's hard to figure
>things
>> >> without a basis of information.  However, you'll probably find looking
>> >> in the email archives helpful.  For instance, I found this with a
>simple
>> >> search:
>> >>
>> >> <http://www.cygwin.com/ml/cygwin/2003-02/msg00522.html>
>> >>
>> >> Seems to describe your situation to a tee, complete with solution.
>Just
>> >> one more reason not to use tech.erdelynet.com.  Seems your problem is a
>> >> common one when following the directions at this site.
>> >>
>> >> If this doesn't solve your problem, I suggest uninstalling ssh and
>> >> reinstalling.  Then, stay away from tech.erdelynet.com and just set
>> >> things up as the Cygwin doc suggests.  Otherwise, bug
>tech.erdelynet.com
>> >> about it if you insist on using their advice.
>> >>
>> >> Larry
>> >>
>> >>
>> >> At 09:40 PM 9/1/2003, Dan Adams you wrote:
>> >> >The error it gives me when I try to start the service, after using the
>> >> >ssh-host-config command to make the service, and using the
>cygrunsrv -S
>> >sshd
>> >> >command is:
>> >> >cygrunsrv: Error starting a service: QueryServiceStatus:  Win32 error
>> >1062:
>> >> >The service has not been started.
>> >> >I am not sure if this will help at all, but I figured it might.
>> >> >
>> >> >
>> >> >-- 
>> >> >Dan Adams - dan@infochi.com
>> >> >http://www.infochi.com
>> >> >
>> >> >
>> >> >"Dan Adams" <dan@infochi.com> wrote in message
>> >> >news:bj0ruq$thn$1@sea.gmane.org...
>> >> >> You mentioned that it is not reaching the server through ssh, is
>there
>> >any
>> >> >> way I can find out where the problem occurs at? I am using a command
>> >line
>> >> >of
>> >> >> :
>> >> >>     ssh -p 422 localhost
>> >> >> to do this, I am not sure where in the networking the problem might
>lie
>> >> >at,
>> >> >> is there any way that I can find out, or assist you in finding out?
>> >> >>
>> >> >> The reason I was trying it with inetd, partly because it mentioned
>it
>> >on
>> >> >the
>> >> >> website of yours, is because I have it working correctly for a
>couple
>> >of
>> >> >> other services that are part of cygwin.
>> >> >>
>> >> >> One discrepancy I found between the website and the ssh-host-config
>> >file
>> >> >> that was installed on my machine is
>> >> >> file:
>> >> >>     chown system.system /var/empty
>> >> >> website
>> >> >>     chown system:system /var/empty
>> >> >>
>> >> >> How should this be? If you notice the website has a colon on that
>line,
>> >> >the
>> >> >> file has a period on that line.
>> >> >>
>> >> >> The website I am referring to is:
>> >> >http://tech.erdelynet.com/cygwin-sshd.html
>> >> >>
>> >> >> -- 
>> >> >> Dan Adams - dan@infochi.com
>> >> >> http://www.infochi.com
>> >> >>
>> >> >>
>> >> >> "Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>> >> >> news:5.1.0.14.0.20030901200938.01f7e0c0@127.0.0.1...
>> >> >> > You're not reaching the server.  The read of the basic version
>> >> >> identification
>> >> >> > is failing.  If the client and the server can't understand what
>> >version
>> >> >of
>> >> >> > ssh is running on either end, they don't talk.  So you're not
>> >reaching
>> >> >the
>> >> >> > server through ssh.
>> >> >> >
>> >> >> > Sorry I don't know much about setting up ssh under inetd.  Is
>there a
>> >> >> reason
>> >> >> > not to set it up as the documentation suggests?  I can vouch for
>> >things
>> >> >> > working that way.
>> >> >> >
>> >> >> > Larry
>> >> >> >
>> >> >> >
>> >> >> > At 06:38 PM 9/1/2003, Dan Adams you wrote:
>> >> >> > >Thanks for the comment about cygrunsrv and the method of removing
>> >> >service
>> >> >> > >from win2k That worked well
>> >> >> > >
>> >> >> > >Since I have inetd working well. I have a telnet server and also
>a
>> >FTP
>> >> >> > >server, but neither is available outside of my firewall. I
>thought
>> >that
>> >> >I
>> >> >> > >would try and see if I could use the sshd server that I just
>setup
>> >via
>> >> >> the
>> >> >> > >inetd thing. When I did this, I got an error message of:
>> >> >> > >
>> >> >> > >ssh_exchange_identification: read: Connection reset by peer
>> >> >> > >
>> >> >> > >What would this mean? This is the only error message that I have
>> >been
>> >> >> > >getting from the ssh deamon when I try and connect, and even
>before
>> >I
>> >> >ran
>> >> >> > >that setup script.
>> >> >> > >
>> >> >> > >Dan Adams - dan@infochi.com
>> >> >> > >http://www.infochi.com
>> >> >> > >
>> >> >> > >
>> >> >> > >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>> >> >> > >news:5.1.0.14.0.20030901180444.01f69c90@127.0.0.1...
>> >> >> > >> OK, visit <http://cygwin.com/problems.html> and provide the
>> >requested
>> >> >> > >info.
>> >> >> > >> Also, send along (attached too) your /etc/passwd and /etc/group
>> >> >files.
>> >> >> > >The
>> >> >> > >> actual transcript of your attempt to run chown would be helpful
>> >too.
>> >> >> > >>
>> >> >> > >> cygrunsrv -E <service name> followed by cygrunsrv -R <service
>> >name>
>> >> >> will
>> >> >> > >> stop and remove a service.
>> >> >> > >>
>> >> >> > >> Larry
>> >> >> > >>
>> >> >> > >>
>> >> >> > >> At 06:04 PM 9/1/2003, Dan Adams you wrote:
>> >> >> > >> >I tried the directions at the site, and when it did the chown
>> >> >> > >system.system
>> >> >> > >> >/var/empty command. It errors out, saying that the user is
>> >unknown.
>> >> >It
>> >> >> > >seems
>> >> >> > >> >to not want to start the service after that point. Any more
>> >> >> suggestions.
>> >> >> > >> >Also does anyone know how to remove a service from the listong
>in
>> >> >> Win2k
>> >> >> > >once
>> >> >> > >> >it is no longer desired. I am hoping to change from telnet/ftp
>to
>> >> >ssh
>> >> >> > >access
>> >> >> > >> >which means I would be able to get rid of the service of inetd
>> >that
>> >> >is
>> >> >> in
>> >> >> > >my
>> >> >> > >> >win2k control panel thing.
>> >> >> > >> >
>> >> >> > >> >Dan Adams - dan@infochi.com
>> >> >> > >> >http://www.infochi.com
>> >> >> > >> >
>> >> >> > >> >
>> >> >> > >> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>> >> >> > >> >news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
>> >> >> > >> >> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
>> >> >> > >> >> >Dan Adams" wrote
>> >> >> > >> >> >
>> >> >> > >> >> >> Does anyone know if there is either a script that will
>> >automate
>> >> >> the
>> >> >> > >> >> >process
>> >> >> > >> >> >> of setting up an ssh server? Or is there a tutorial setup
>> >page?
>> >> >> > >> >> >
>> >> >> > >> >> >http://tech.erdelynet.com/cygwin-sshd.html
>> >> >> > >> >>
>> >> >> > >> >>
>> >> >> > >> >> And please follow-up with any questions generated from
>> >following
>> >> >the
>> >> >> > >> >> directions at this site with tech.erdelynet.com.  The
>supported
>> >> >> > >> >information
>> >> >> > >> >> for setting up Cygwin's OpenSSH distribution is
>> >> >> > >> >> /usr/doc/Cygwin/openssh-*.README.  It's the only source of
>> >> >> information
>> >> >> > >> >this
>> >> >> > >> >> list will entertain questions about.
>> >> >> > >> >>
>> >> >> > >> >> Thanks,
>> >> >> > >> >>
>> >> >> > >> >>
>> >> >> > >> >> Larry Hall                              http://www.rfk.com
>> >> >> > >> >> RFK Partners, Inc.                      (508) 893-9779 - RFK
>> >> >Office
>> >> >> > >> >> 838 Washington Street                   (508) 893-9889 - FAX
>> >> >> > >> >> Holliston, MA 01746
>> >> >> > >> >>
>> >> >> > >> >>
>> >> >> > >> >
>> >> >> > >> >
>> >> >> > >> >
>> >> >> > >> >
>> >> >> > >> >--
>> >> >> > >> >Unsubscribe info:
>http://cygwin.com/ml/#unsubscribe-simple
>> >> >> > >> >Problem reports:       http://cygwin.com/problems.html
>> >> >> > >> >Documentation:         http://cygwin.com/docs.html
>> >> >> > >> >FAQ:                   http://cygwin.com/faq/
>> >> >> > >>
>> >> >> > >>
>> >> >> > >
>> >> >> > >
>> >> >> > >
>> >> >> > >
>> >> >> > >--
>> >> >> > >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> >> >> > >Problem reports:       http://cygwin.com/problems.html
>> >> >> > >Documentation:         http://cygwin.com/docs.html
>> >> >> > >FAQ:                   http://cygwin.com/faq/
>> >> >> >
>> >> >> > --
>> >> >> > Larry Hall                              http://www.rfk.com
>> >> >> > RFK Partners, Inc.                      (508) 893-9779 - RFK
>Office
>> >> >> > 838 Washington Street                   (508) 893-9889 - FAX
>> >> >> > Holliston, MA 01746
>> >> >> >
>> >> >> >
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >--
>> >> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> >> >Problem reports:       http://cygwin.com/problems.html
>> >> >Documentation:         http://cygwin.com/docs.html
>> >> >FAQ:                   http://cygwin.com/faq/
>> >>
>> >>
>> >
>> >
>> >
>> >
>> >
>> >
>> >--
>> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> >Problem reports:       http://cygwin.com/problems.html
>> >Documentation:         http://cygwin.com/docs.html
>> >FAQ:                   http://cygwin.com/faq/
>>
>> --
>> Larry Hall                              http://www.rfk.com
>> RFK Partners, Inc.                      (508) 893-9779 - RFK Office
>> 838 Washington Street                   (508) 893-9889 - FAX
>> Holliston, MA 01746
>>
>>
>
>
>
>
>--
>Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>Problem reports:       http://cygwin.com/problems.html
>Documentation:         http://cygwin.com/docs.html
>FAQ:                   http://cygwin.com/faq/


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

RE: sshd setup question

[Dan Adams]

[-- Attachment #1: Type: text/plain, Size: 14270 bytes --]

Larry,
	I have attached those two files. Here is a transcript of my attempt
to set the permissions along with a 'ls -l' command done in the /var
directory.

---
dan@dan-infochi ~>cd /var
dan@dan-infochi /var>ls -l
total 0
drwxrwxrwx+   3 ???????? Users           0 May 17 15:07 cache
drwxr-xr-x+   2 dan      None            0 Sep  1 14:32 empty
drwxrwxrwx+   2 ???????? Users           0 Sep  2 16:29 log
drwxrwxrwx+   2 ???????? Users           0 Sep  1 14:35 run
drwxrwxrwx+   2 ???????? Users           0 May 17 15:07 tmp
dan@dan-infochi /var>chmod 744 empty
dan@dan-infochi /var>ls -l
total 0
drwxrwxrwx+   3 ???????? Users           0 May 17 15:07 cache
drwxr--r--+   2 dan      None            0 Sep  1 14:32 empty
drwxrwxrwx+   2 ???????? Users           0 Sep  2 16:29 log
drwxrwxrwx+   2 ???????? Users           0 Sep  1 14:35 run
drwxrwxrwx+   2 ???????? Users           0 May 17 15:07 tmp
dan@dan-infochi /var>chown root empty
chown: `root': invalid user
dan@dan-infochi /var>ls -l
total 0
drwxrwxrwx+   3 ???????? Users           0 May 17 15:07 cache
drwxr--r--+   2 dan      None            0 Sep  1 14:32 empty
drwxrwxrwx+   2 ???????? Users           0 Sep  2 16:29 log
drwxrwxrwx+   2 ???????? Users           0 Sep  1 14:35 run
drwxrwxrwx+   2 ???????? Users           0 May 17 15:07 tmp
-----
Then as before I get
-----
dan@dan-infochi /bin>cygrunsrv -S sshd
cygrunsrv: Error starting a service: QueryServiceStatus:  Win32 error 1062:
The service has not been started.
-----

Dan Adams - dan@infochi.com
http://www.infochi.com

 

-----Original Message-----
From: Larry Hall [mailto:cygwin-lh@cygwin.com] 
Sent: Tuesday, September 02, 2003 5:35 PM
To: Dan Adams; cygwin@cygwin.com
Subject: Re: sshd setup question


Again, please attach your '/etc/passwd' and '/etc/group' files and show a
transcript of your attempt to set /var/empty persmissions along with the
output from 'ls -l /var'.

Larry


At 11:43 PM 9/1/2003, Dan Adams you wrote:
>I followed both of those suggestions. I retried that script and it 
>seems to generate the key files each time it is run now. As far as that 
>mySQL thing, I renamed that dll file and will use another program 
>temporarily, until I can figure this thing out.
>
>Once I did those two things, I still see an error that looks the same, 
>although the contents of the sshd.log file is now:
>    /var/empty must be owned by root and not group or world-writable.
>
>My main trouble with this is that I seem to be having trouble getting 
>the permissions for that directory like it says, I can get it chmod'ed 
>to 744 easily, but I can't seem to get its ownership to root or system 
>either one. I am using a windows 2000 machine, although that may have 
>been in my cygcheck file that I sent. Does anyone have a suggestion on 
>how to get this permission thing set.
>
>Dan
>
>
>"Larry Hall" <cygwin-lh@cygwin.com> wrote in message 
>news:5.1.0.14.0.20030901223001.01f810c8@127.0.0.1...
>> ssh-host-config creates /etc/ssh_host_key*.
>>
>>  From your cygcheck output:
>>
>>   653k 2003/07/22 C:\Program Files\mysql\bin\cygwinb19.dll - os=4.0
>img=1.0 sys=4.0
>>                   "cygwinb19.dll" v0.0 ts=1998/7/15 18:50
>>
>> This will is trouble waiting to happen.  Get rid of this DLL and 
>> update mysql as required.
>>
>> Larry
>>
>>
>> At 10:25 PM 9/1/2003, Dan Adams you wrote:
>>
>>
>>
>> >I am guessing this questioning might shift a little with my latest
>finding.
>> >Also, I have attached the cygcheck file thing that was requested at 
>> >that website.
>> >
>> >My latest finding is:
>> >Could not load host key: /etc/ssh_host_key
>> >Could not load host key: /etc/ssh_host_rsa_key
>> >Could not load host key: /etc/ssh_host_dsa_key
>> >Disabling protocol version 1. Could not load host key Disabling 
>> >protocol version 2. Could not load host key
>> >
>> >I found this when looking in the sshd.log file that is in that 
>> >directory. Relating to the permissions that that gentleman mentioned 
>> >in his post on this list, those directories (this may not be good 
>> >though) have the permissions for the system account. Is there 
>> >anything that speaks about
>how
>> >to create these keys?
>> >
>> >Dan
>> >
>> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message 
>> >news:5.1.0.14.0.20030901214533.01f6a988@127.0.0.1...
>> >> OK, I'm not sure my efforts are paying off here.  I'd recommend 
>> >> again
>that
>> >> you visit <http://cygwin.com/problems.html>.  It's hard to figure
>things
>> >> without a basis of information.  However, you'll probably find 
>> >> looking in the email archives helpful.  For instance, I found this 
>> >> with a
>simple
>> >> search:
>> >>
>> >> <http://www.cygwin.com/ml/cygwin/2003-02/msg00522.html>
>> >>
>> >> Seems to describe your situation to a tee, complete with solution.
>Just
>> >> one more reason not to use tech.erdelynet.com.  Seems your problem 
>> >> is a common one when following the directions at this site.
>> >>
>> >> If this doesn't solve your problem, I suggest uninstalling ssh and 
>> >> reinstalling.  Then, stay away from tech.erdelynet.com and just 
>> >> set things up as the Cygwin doc suggests.  Otherwise, bug
>tech.erdelynet.com
>> >> about it if you insist on using their advice.
>> >>
>> >> Larry
>> >>
>> >>
>> >> At 09:40 PM 9/1/2003, Dan Adams you wrote:
>> >> >The error it gives me when I try to start the service, after 
>> >> >using the ssh-host-config command to make the service, and using 
>> >> >the
>cygrunsrv -S
>> >sshd
>> >> >command is:
>> >> >cygrunsrv: Error starting a service: QueryServiceStatus:  Win32 
>> >> >error
>> >1062:
>> >> >The service has not been started.
>> >> >I am not sure if this will help at all, but I figured it might.
>> >> >
>> >> >
>> >> >--
>> >> >Dan Adams - dan@infochi.com
>> >> >http://www.infochi.com
>> >> >
>> >> >
>> >> >"Dan Adams" <dan@infochi.com> wrote in message 
>> >> >news:bj0ruq$thn$1@sea.gmane.org...
>> >> >> You mentioned that it is not reaching the server through ssh, 
>> >> >> is
>there
>> >any
>> >> >> way I can find out where the problem occurs at? I am using a 
>> >> >> command
>> >line
>> >> >of
>> >> >> :
>> >> >>     ssh -p 422 localhost
>> >> >> to do this, I am not sure where in the networking the problem 
>> >> >> might
>lie
>> >> >at,
>> >> >> is there any way that I can find out, or assist you in finding 
>> >> >> out?
>> >> >>
>> >> >> The reason I was trying it with inetd, partly because it 
>> >> >> mentioned
>it
>> >on
>> >> >the
>> >> >> website of yours, is because I have it working correctly for a
>couple
>> >of
>> >> >> other services that are part of cygwin.
>> >> >>
>> >> >> One discrepancy I found between the website and the 
>> >> >> ssh-host-config
>> >file
>> >> >> that was installed on my machine is
>> >> >> file:
>> >> >>     chown system.system /var/empty
>> >> >> website
>> >> >>     chown system:system /var/empty
>> >> >>
>> >> >> How should this be? If you notice the website has a colon on 
>> >> >> that
>line,
>> >> >the
>> >> >> file has a period on that line.
>> >> >>
>> >> >> The website I am referring to is:
>> >> >http://tech.erdelynet.com/cygwin-sshd.html
>> >> >>
>> >> >> --
>> >> >> Dan Adams - dan@infochi.com
>> >> >> http://www.infochi.com
>> >> >>
>> >> >>
>> >> >> "Larry Hall" <cygwin-lh@cygwin.com> wrote in message 
>> >> >> news:5.1.0.14.0.20030901200938.01f7e0c0@127.0.0.1...
>> >> >> > You're not reaching the server.  The read of the basic 
>> >> >> > version
>> >> >> identification
>> >> >> > is failing.  If the client and the server can't understand 
>> >> >> > what
>> >version
>> >> >of
>> >> >> > ssh is running on either end, they don't talk.  So you're not
>> >reaching
>> >> >the
>> >> >> > server through ssh.
>> >> >> >
>> >> >> > Sorry I don't know much about setting up ssh under inetd.  Is
>there a
>> >> >> reason
>> >> >> > not to set it up as the documentation suggests?  I can vouch 
>> >> >> > for
>> >things
>> >> >> > working that way.
>> >> >> >
>> >> >> > Larry
>> >> >> >
>> >> >> >
>> >> >> > At 06:38 PM 9/1/2003, Dan Adams you wrote:
>> >> >> > >Thanks for the comment about cygrunsrv and the method of 
>> >> >> > >removing
>> >> >service
>> >> >> > >from win2k That worked well
>> >> >> > >
>> >> >> > >Since I have inetd working well. I have a telnet server and 
>> >> >> > >also
>a
>> >FTP
>> >> >> > >server, but neither is available outside of my firewall. I
>thought
>> >that
>> >> >I
>> >> >> > >would try and see if I could use the sshd server that I just
>setup
>> >via
>> >> >> the
>> >> >> > >inetd thing. When I did this, I got an error message of:
>> >> >> > >
>> >> >> > >ssh_exchange_identification: read: Connection reset by peer
>> >> >> > >
>> >> >> > >What would this mean? This is the only error message that I 
>> >> >> > >have
>> >been
>> >> >> > >getting from the ssh deamon when I try and connect, and even
>before
>> >I
>> >> >ran
>> >> >> > >that setup script.
>> >> >> > >
>> >> >> > >Dan Adams - dan@infochi.com
>> >> >> > >http://www.infochi.com
>> >> >> > >
>> >> >> > >
>> >> >> > >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message 
>> >> >> > >news:5.1.0.14.0.20030901180444.01f69c90@127.0.0.1...
>> >> >> > >> OK, visit <http://cygwin.com/problems.html> and provide 
>> >> >> > >> the
>> >requested
>> >> >> > >info.
>> >> >> > >> Also, send along (attached too) your /etc/passwd and 
>> >> >> > >> /etc/group
>> >> >files.
>> >> >> > >The
>> >> >> > >> actual transcript of your attempt to run chown would be 
>> >> >> > >> helpful
>> >too.
>> >> >> > >>
>> >> >> > >> cygrunsrv -E <service name> followed by cygrunsrv -R 
>> >> >> > >> <service
>> >name>
>> >> >> will
>> >> >> > >> stop and remove a service.
>> >> >> > >>
>> >> >> > >> Larry
>> >> >> > >>
>> >> >> > >>
>> >> >> > >> At 06:04 PM 9/1/2003, Dan Adams you wrote:
>> >> >> > >> >I tried the directions at the site, and when it did the 
>> >> >> > >> >chown
>> >> >> > >system.system
>> >> >> > >> >/var/empty command. It errors out, saying that the user 
>> >> >> > >> >is
>> >unknown.
>> >> >It
>> >> >> > >seems
>> >> >> > >> >to not want to start the service after that point. Any 
>> >> >> > >> >more
>> >> >> suggestions.
>> >> >> > >> >Also does anyone know how to remove a service from the 
>> >> >> > >> >listong
>in
>> >> >> Win2k
>> >> >> > >once
>> >> >> > >> >it is no longer desired. I am hoping to change from 
>> >> >> > >> >telnet/ftp
>to
>> >> >ssh
>> >> >> > >access
>> >> >> > >> >which means I would be able to get rid of the service of 
>> >> >> > >> >inetd
>> >that
>> >> >is
>> >> >> in
>> >> >> > >my
>> >> >> > >> >win2k control panel thing.
>> >> >> > >> >
>> >> >> > >> >Dan Adams - dan@infochi.com http://www.infochi.com
>> >> >> > >> >
>> >> >> > >> >
>> >> >> > >> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message 
>> >> >> > >> >news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
>> >> >> > >> >> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
>> >> >> > >> >> >Dan Adams" wrote
>> >> >> > >> >> >
>> >> >> > >> >> >> Does anyone know if there is either a script that 
>> >> >> > >> >> >> will
>> >automate
>> >> >> the
>> >> >> > >> >> >process
>> >> >> > >> >> >> of setting up an ssh server? Or is there a tutorial 
>> >> >> > >> >> >> setup
>> >page?
>> >> >> > >> >> >
>> >> >> > >> >> >http://tech.erdelynet.com/cygwin-sshd.html
>> >> >> > >> >>
>> >> >> > >> >>
>> >> >> > >> >> And please follow-up with any questions generated from
>> >following
>> >> >the
>> >> >> > >> >> directions at this site with tech.erdelynet.com.  The
>supported
>> >> >> > >> >information
>> >> >> > >> >> for setting up Cygwin's OpenSSH distribution is 
>> >> >> > >> >> /usr/doc/Cygwin/openssh-*.README.  It's the only source 
>> >> >> > >> >> of
>> >> >> information
>> >> >> > >> >this
>> >> >> > >> >> list will entertain questions about.
>> >> >> > >> >>
>> >> >> > >> >> Thanks,
>> >> >> > >> >>
>> >> >> > >> >>
>> >> >> > >> >> Larry Hall                              http://www.rfk.com
>> >> >> > >> >> RFK Partners, Inc.                      (508) 893-9779 -
RFK
>> >> >Office
>> >> >> > >> >> 838 Washington Street                   (508) 893-9889 -
FAX
>> >> >> > >> >> Holliston, MA 01746
>> >> >> > >> >>
>> >> >> > >> >>
>> >> >> > >> >
>> >> >> > >> >
>> >> >> > >> >
>> >> >> > >> >
>> >> >> > >> >--
>> >> >> > >> >Unsubscribe info:
>http://cygwin.com/ml/#unsubscribe-simple
>> >> >> > >> >Problem reports:       http://cygwin.com/problems.html
>> >> >> > >> >Documentation:         http://cygwin.com/docs.html
>> >> >> > >> >FAQ:                   http://cygwin.com/faq/
>> >> >> > >>
>> >> >> > >>
>> >> >> > >
>> >> >> > >
>> >> >> > >
>> >> >> > >
>> >> >> > >--
>> >> >> > >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> >> >> > >Problem reports:       http://cygwin.com/problems.html
>> >> >> > >Documentation:         http://cygwin.com/docs.html
>> >> >> > >FAQ:                   http://cygwin.com/faq/
>> >> >> >
>> >> >> > --
>> >> >> > Larry Hall                              http://www.rfk.com
>> >> >> > RFK Partners, Inc.                      (508) 893-9779 - RFK
>Office
>> >> >> > 838 Washington Street                   (508) 893-9889 - FAX
>> >> >> > Holliston, MA 01746
>> >> >> >
>> >> >> >
>> >> >>
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >--
>> >> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> >> >Problem reports:       http://cygwin.com/problems.html
>> >> >Documentation:         http://cygwin.com/docs.html
>> >> >FAQ:                   http://cygwin.com/faq/
>> >>
>> >>
>> >
>> >
>> >
>> >
>> >
>> >
>> >--
>> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> >Problem reports:       http://cygwin.com/problems.html
>> >Documentation:         http://cygwin.com/docs.html
>> >FAQ:                   http://cygwin.com/faq/
>>
>> --
>> Larry Hall                              http://www.rfk.com
>> RFK Partners, Inc.                      (508) 893-9779 - RFK Office
>> 838 Washington Street                   (508) 893-9889 - FAX
>> Holliston, MA 01746
>>
>>
>
>
>
>
>--
>Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>Problem reports:       http://cygwin.com/problems.html
>Documentation:         http://cygwin.com/docs.html
>FAQ:                   http://cygwin.com/faq/


[-- Attachment #2: passwd --]
[-- Type: application/octet-stream, Size: 682 bytes --]

dan:unused_by_nt/2000/xp:1002:513:Dan Adams,U-DAN-INFOCHI\dan,S-1-5-21-1844237615-789336058-839522115-1002:/home/dan:/bin/tcsh
ftpupload:unused_by_nt/2000/xp:1011:513:U-DAN-INFOCHI\ftpupload,S-1-5-21-1844237615-789336058-839522115-1011:/data/files/incoming:
laurel:unused_by_nt/2000/xp:1012:513:Laurel Crothers,U-DAN-INFOCHI\laurel,S-1-5-21-1844237615-789336058-839522115-1012:/data/multimedia/graphics/BSM:
cindy:unused_by_nt/2000/xp:1017:513:Cindy Adams,U-DAN-INFOCHI\cindy,S-1-5-21-1844237615-789336058-839522115-1017:/data/files/incoming:
sshd:unused_by_nt/2000/xp:1018:513:sshd privsep,U-DAN-INFOCHI\sshd,S-1-5-21-1844237615-789336058-839522115-1018:/var/empty:/bin/false

[-- Attachment #3: group --]
[-- Type: application/octet-stream, Size: 543 bytes --]

SYSTEM:S-1-5-18:18:
None:S-1-5-21-1844237615-789336058-839522115-513:513:
Administrators:S-1-5-32-544:544:
Backup Operators:S-1-5-32-551:551:
Guests:S-1-5-32-546:546:
Power Users:S-1-5-32-547:547:
Replicator:S-1-5-32-552:552:
Users:S-1-5-32-545:545:
DAN-INFOCHI Admins:S-1-5-21-1844237615-789336058-839522115-1008:1008:
DAN-INFOCHI Authors:S-1-5-21-1844237615-789336058-839522115-1009:1009:
DAN-INFOCHI Browsers:S-1-5-21-1844237615-789336058-839522115-1010:1010:
Debugger Users:S-1-5-21-1844237615-789336058-839522115-1004:1004:


[-- Attachment #4: Type: text/plain, Size: 218 bytes --]

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

RE: sshd setup question

[Larry Hall]

Don't use "root" (I know it mentioned it).  Use "SYSTEM".  If that doesn't
work, send the output of 'getfacl /var/empty'.

BTW, you don't need to reply to my address (it's faked anyway).  I've 
redirected all response to me to the list so I'll get it regardless.

Larry


At 08:56 PM 9/2/2003, Dan Adams you wrote:
>Larry,
>    I have attached those two files. Here is a transcript of my attempt
>to set the permissions along with a 'ls -l' command done in the /var
>directory.
>
>---
>dan@dan-infochi ~>cd /var
>dan@dan-infochi /var>ls -l
>total 0
>drwxrwxrwx+   3 ???????? Users           0 May 17 15:07 cache
>drwxr-xr-x+   2 dan      None            0 Sep  1 14:32 empty
>drwxrwxrwx+   2 ???????? Users           0 Sep  2 16:29 log
>drwxrwxrwx+   2 ???????? Users           0 Sep  1 14:35 run
>drwxrwxrwx+   2 ???????? Users           0 May 17 15:07 tmp
>dan@dan-infochi /var>chmod 744 empty
>dan@dan-infochi /var>ls -l
>total 0
>drwxrwxrwx+   3 ???????? Users           0 May 17 15:07 cache
>drwxr--r--+   2 dan      None            0 Sep  1 14:32 empty
>drwxrwxrwx+   2 ???????? Users           0 Sep  2 16:29 log
>drwxrwxrwx+   2 ???????? Users           0 Sep  1 14:35 run
>drwxrwxrwx+   2 ???????? Users           0 May 17 15:07 tmp
>dan@dan-infochi /var>chown root empty
>chown: `root': invalid user
>dan@dan-infochi /var>ls -l
>total 0
>drwxrwxrwx+   3 ???????? Users           0 May 17 15:07 cache
>drwxr--r--+   2 dan      None            0 Sep  1 14:32 empty
>drwxrwxrwx+   2 ???????? Users           0 Sep  2 16:29 log
>drwxrwxrwx+   2 ???????? Users           0 Sep  1 14:35 run
>drwxrwxrwx+   2 ???????? Users           0 May 17 15:07 tmp
>-----
>Then as before I get
>-----
>dan@dan-infochi /bin>cygrunsrv -S sshd
>cygrunsrv: Error starting a service: QueryServiceStatus:  Win32 error 1062:
>The service has not been started.
>-----
>
>Dan Adams - dan@infochi.com
>http://www.infochi.com
>
> 
>
>-----Original Message-----
>From: Larry Hall [mailto:cygwin-lh@cygwin.com] 
>Sent: Tuesday, September 02, 2003 5:35 PM
>To: Dan Adams; cygwin@cygwin.com
>Subject: Re: sshd setup question
>
>
>Again, please attach your '/etc/passwd' and '/etc/group' files and show a
>transcript of your attempt to set /var/empty persmissions along with the
>output from 'ls -l /var'.
>
>Larry
>
>
>At 11:43 PM 9/1/2003, Dan Adams you wrote:
>>I followed both of those suggestions. I retried that script and it 
>>seems to generate the key files each time it is run now. As far as that 
>>mySQL thing, I renamed that dll file and will use another program 
>>temporarily, until I can figure this thing out.
>>
>>Once I did those two things, I still see an error that looks the same, 
>>although the contents of the sshd.log file is now:
>>    /var/empty must be owned by root and not group or world-writable.
>>
>>My main trouble with this is that I seem to be having trouble getting 
>>the permissions for that directory like it says, I can get it chmod'ed 
>>to 744 easily, but I can't seem to get its ownership to root or system 
>>either one. I am using a windows 2000 machine, although that may have 
>>been in my cygcheck file that I sent. Does anyone have a suggestion on 
>>how to get this permission thing set.
>>
>>Dan
>>
>>
>>"Larry Hall" <cygwin-lh@cygwin.com> wrote in message 
>>news:5.1.0.14.0.20030901223001.01f810c8@127.0.0.1...
>>> ssh-host-config creates /etc/ssh_host_key*.
>>>
>>>  From your cygcheck output:
>>>
>>>   653k 2003/07/22 C:\Program Files\mysql\bin\cygwinb19.dll - os=4.0
>>img=1.0 sys=4.0
>>>                   "cygwinb19.dll" v0.0 ts=1998/7/15 18:50
>>>
>>> This will is trouble waiting to happen.  Get rid of this DLL and 
>>> update mysql as required.
>>>
>>> Larry
>>>
>>>
>>> At 10:25 PM 9/1/2003, Dan Adams you wrote:
>>>
>>>
>>>
>>> >I am guessing this questioning might shift a little with my latest
>>finding.
>>> >Also, I have attached the cygcheck file thing that was requested at 
>>> >that website.
>>> >
>>> >My latest finding is:
>>> >Could not load host key: /etc/ssh_host_key
>>> >Could not load host key: /etc/ssh_host_rsa_key
>>> >Could not load host key: /etc/ssh_host_dsa_key
>>> >Disabling protocol version 1. Could not load host key Disabling 
>>> >protocol version 2. Could not load host key
>>> >
>>> >I found this when looking in the sshd.log file that is in that 
>>> >directory. Relating to the permissions that that gentleman mentioned 
>>> >in his post on this list, those directories (this may not be good 
>>> >though) have the permissions for the system account. Is there 
>>> >anything that speaks about
>>how
>>> >to create these keys?
>>> >
>>> >Dan
>>> >
>>> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message 
>>> >news:5.1.0.14.0.20030901214533.01f6a988@127.0.0.1...
>>> >> OK, I'm not sure my efforts are paying off here.  I'd recommend 
>>> >> again
>>that
>>> >> you visit <http://cygwin.com/problems.html>.  It's hard to figure
>>things
>>> >> without a basis of information.  However, you'll probably find 
>>> >> looking in the email archives helpful.  For instance, I found this 
>>> >> with a
>>simple
>>> >> search:
>>> >>
>>> >> <http://www.cygwin.com/ml/cygwin/2003-02/msg00522.html>
>>> >>
>>> >> Seems to describe your situation to a tee, complete with solution.
>>Just
>>> >> one more reason not to use tech.erdelynet.com.  Seems your problem 
>>> >> is a common one when following the directions at this site.
>>> >>
>>> >> If this doesn't solve your problem, I suggest uninstalling ssh and 
>>> >> reinstalling.  Then, stay away from tech.erdelynet.com and just 
>>> >> set things up as the Cygwin doc suggests.  Otherwise, bug
>>tech.erdelynet.com
>>> >> about it if you insist on using their advice.
>>> >>
>>> >> Larry
>>> >>
>>> >>
>>> >> At 09:40 PM 9/1/2003, Dan Adams you wrote:
>>> >> >The error it gives me when I try to start the service, after 
>>> >> >using the ssh-host-config command to make the service, and using 
>>> >> >the
>>cygrunsrv -S
>>> >sshd
>>> >> >command is:
>>> >> >cygrunsrv: Error starting a service: QueryServiceStatus:  Win32 
>>> >> >error
>>> >1062:
>>> >> >The service has not been started.
>>> >> >I am not sure if this will help at all, but I figured it might.
>>> >> >
>>> >> >
>>> >> >--
>>> >> >Dan Adams - dan@infochi.com
>>> >> >http://www.infochi.com
>>> >> >
>>> >> >
>>> >> >"Dan Adams" <dan@infochi.com> wrote in message 
>>> >> >news:bj0ruq$thn$1@sea.gmane.org...
>>> >> >> You mentioned that it is not reaching the server through ssh, 
>>> >> >> is
>>there
>>> >any
>>> >> >> way I can find out where the problem occurs at? I am using a 
>>> >> >> command
>>> >line
>>> >> >of
>>> >> >> :
>>> >> >>     ssh -p 422 localhost
>>> >> >> to do this, I am not sure where in the networking the problem 
>>> >> >> might
>>lie
>>> >> >at,
>>> >> >> is there any way that I can find out, or assist you in finding 
>>> >> >> out?
>>> >> >>
>>> >> >> The reason I was trying it with inetd, partly because it 
>>> >> >> mentioned
>>it
>>> >on
>>> >> >the
>>> >> >> website of yours, is because I have it working correctly for a
>>couple
>>> >of
>>> >> >> other services that are part of cygwin.
>>> >> >>
>>> >> >> One discrepancy I found between the website and the 
>>> >> >> ssh-host-config
>>> >file
>>> >> >> that was installed on my machine is
>>> >> >> file:
>>> >> >>     chown system.system /var/empty
>>> >> >> website
>>> >> >>     chown system:system /var/empty
>>> >> >>
>>> >> >> How should this be? If you notice the website has a colon on 
>>> >> >> that
>>line,
>>> >> >the
>>> >> >> file has a period on that line.
>>> >> >>
>>> >> >> The website I am referring to is:
>>> >> >http://tech.erdelynet.com/cygwin-sshd.html
>>> >> >>
>>> >> >> --
>>> >> >> Dan Adams - dan@infochi.com
>>> >> >> http://www.infochi.com
>>> >> >>
>>> >> >>
>>> >> >> "Larry Hall" <cygwin-lh@cygwin.com> wrote in message 
>>> >> >> news:5.1.0.14.0.20030901200938.01f7e0c0@127.0.0.1...
>>> >> >> > You're not reaching the server.  The read of the basic 
>>> >> >> > version
>>> >> >> identification
>>> >> >> > is failing.  If the client and the server can't understand 
>>> >> >> > what
>>> >version
>>> >> >of
>>> >> >> > ssh is running on either end, they don't talk.  So you're not
>>> >reaching
>>> >> >the
>>> >> >> > server through ssh.
>>> >> >> >
>>> >> >> > Sorry I don't know much about setting up ssh under inetd.  Is
>>there a
>>> >> >> reason
>>> >> >> > not to set it up as the documentation suggests?  I can vouch 
>>> >> >> > for
>>> >things
>>> >> >> > working that way.
>>> >> >> >
>>> >> >> > Larry
>>> >> >> >
>>> >> >> >
>>> >> >> > At 06:38 PM 9/1/2003, Dan Adams you wrote:
>>> >> >> > >Thanks for the comment about cygrunsrv and the method of 
>>> >> >> > >removing
>>> >> >service
>>> >> >> > >from win2k That worked well
>>> >> >> > >
>>> >> >> > >Since I have inetd working well. I have a telnet server and 
>>> >> >> > >also
>>a
>>> >FTP
>>> >> >> > >server, but neither is available outside of my firewall. I
>>thought
>>> >that
>>> >> >I
>>> >> >> > >would try and see if I could use the sshd server that I just
>>setup
>>> >via
>>> >> >> the
>>> >> >> > >inetd thing. When I did this, I got an error message of:
>>> >> >> > >
>>> >> >> > >ssh_exchange_identification: read: Connection reset by peer
>>> >> >> > >
>>> >> >> > >What would this mean? This is the only error message that I 
>>> >> >> > >have
>>> >been
>>> >> >> > >getting from the ssh deamon when I try and connect, and even
>>before
>>> >I
>>> >> >ran
>>> >> >> > >that setup script.
>>> >> >> > >
>>> >> >> > >Dan Adams - dan@infochi.com
>>> >> >> > >http://www.infochi.com
>>> >> >> > >
>>> >> >> > >
>>> >> >> > >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message 
>>> >> >> > >news:5.1.0.14.0.20030901180444.01f69c90@127.0.0.1...
>>> >> >> > >> OK, visit <http://cygwin.com/problems.html> and provide 
>>> >> >> > >> the
>>> >requested
>>> >> >> > >info.
>>> >> >> > >> Also, send along (attached too) your /etc/passwd and 
>>> >> >> > >> /etc/group
>>> >> >files.
>>> >> >> > >The
>>> >> >> > >> actual transcript of your attempt to run chown would be 
>>> >> >> > >> helpful
>>> >too.
>>> >> >> > >>
>>> >> >> > >> cygrunsrv -E <service name> followed by cygrunsrv -R 
>>> >> >> > >> <service
>>> >name>
>>> >> >> will
>>> >> >> > >> stop and remove a service.
>>> >> >> > >>
>>> >> >> > >> Larry
>>> >> >> > >>
>>> >> >> > >>
>>> >> >> > >> At 06:04 PM 9/1/2003, Dan Adams you wrote:
>>> >> >> > >> >I tried the directions at the site, and when it did the 
>>> >> >> > >> >chown
>>> >> >> > >system.system
>>> >> >> > >> >/var/empty command. It errors out, saying that the user 
>>> >> >> > >> >is
>>> >unknown.
>>> >> >It
>>> >> >> > >seems
>>> >> >> > >> >to not want to start the service after that point. Any 
>>> >> >> > >> >more
>>> >> >> suggestions.
>>> >> >> > >> >Also does anyone know how to remove a service from the 
>>> >> >> > >> >listong
>>in
>>> >> >> Win2k
>>> >> >> > >once
>>> >> >> > >> >it is no longer desired. I am hoping to change from 
>>> >> >> > >> >telnet/ftp
>>to
>>> >> >ssh
>>> >> >> > >access
>>> >> >> > >> >which means I would be able to get rid of the service of 
>>> >> >> > >> >inetd
>>> >that
>>> >> >is
>>> >> >> in
>>> >> >> > >my
>>> >> >> > >> >win2k control panel thing.
>>> >> >> > >> >
>>> >> >> > >> >Dan Adams - dan@infochi.com http://www.infochi.com
>>> >> >> > >> >
>>> >> >> > >> >
>>> >> >> > >> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message 
>>> >> >> > >> >news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
>>> >> >> > >> >> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
>>> >> >> > >> >> >Dan Adams" wrote
>>> >> >> > >> >> >
>>> >> >> > >> >> >> Does anyone know if there is either a script that 
>>> >> >> > >> >> >> will
>>> >automate
>>> >> >> the
>>> >> >> > >> >> >process
>>> >> >> > >> >> >> of setting up an ssh server? Or is there a tutorial 
>>> >> >> > >> >> >> setup
>>> >page?
>>> >> >> > >> >> >
>>> >> >> > >> >> >http://tech.erdelynet.com/cygwin-sshd.html
>>> >> >> > >> >>
>>> >> >> > >> >>
>>> >> >> > >> >> And please follow-up with any questions generated from
>>> >following
>>> >> >the
>>> >> >> > >> >> directions at this site with tech.erdelynet.com.  The
>>supported
>>> >> >> > >> >information
>>> >> >> > >> >> for setting up Cygwin's OpenSSH distribution is 
>>> >> >> > >> >> /usr/doc/Cygwin/openssh-*.README.  It's the only source 
>>> >> >> > >> >> of
>>> >> >> information
>>> >> >> > >> >this
>>> >> >> > >> >> list will entertain questions about.
>>> >> >> > >> >>
>>> >> >> > >> >> Thanks,
>>> >> >> > >> >>
>>> >> >> > >> >>
>>> >> >> > >> >> Larry Hall                              http://www.rfk.com
>>> >> >> > >> >> RFK Partners, Inc.                      (508) 893-9779 -
>RFK
>>> >> >Office
>>> >> >> > >> >> 838 Washington Street                   (508) 893-9889 -
>FAX
>>> >> >> > >> >> Holliston, MA 01746
>>> >> >> > >> >>
>>> >> >> > >> >>
>>> >> >> > >> >
>>> >> >> > >> >
>>> >> >> > >> >
>>> >> >> > >> >
>>> >> >> > >> >--
>>> >> >> > >> >Unsubscribe info:
>>http://cygwin.com/ml/#unsubscribe-simple
>>> >> >> > >> >Problem reports:       http://cygwin.com/problems.html
>>> >> >> > >> >Documentation:         http://cygwin.com/docs.html
>>> >> >> > >> >FAQ:                   http://cygwin.com/faq/
>>> >> >> > >>
>>> >> >> > >>
>>> >> >> > >
>>> >> >> > >
>>> >> >> > >
>>> >> >> > >
>>> >> >> > >--
>>> >> >> > >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>>> >> >> > >Problem reports:       http://cygwin.com/problems.html
>>> >> >> > >Documentation:         http://cygwin.com/docs.html
>>> >> >> > >FAQ:                   http://cygwin.com/faq/
>>> >> >> >
>>> >> >> > --
>>> >> >> > Larry Hall                              http://www.rfk.com
>>> >> >> > RFK Partners, Inc.                      (508) 893-9779 - RFK
>>Office
>>> >> >> > 838 Washington Street                   (508) 893-9889 - FAX
>>> >> >> > Holliston, MA 01746
>>> >> >> >
>>> >> >> >
>>> >> >>
>>> >> >>
>>> >> >>
>>> >> >>
>>> >> >
>>> >> >
>>> >> >
>>> >> >
>>> >> >--
>>> >> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>>> >> >Problem reports:       http://cygwin.com/problems.html
>>> >> >Documentation:         http://cygwin.com/docs.html
>>> >> >FAQ:                   http://cygwin.com/faq/
>>> >>
>>> >>
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >
>>> >--
>>> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>>> >Problem reports:       http://cygwin.com/problems.html
>>> >Documentation:         http://cygwin.com/docs.html
>>> >FAQ:                   http://cygwin.com/faq/
>>>
>>> --
>>> Larry Hall                              http://www.rfk.com
>>> RFK Partners, Inc.                      (508) 893-9779 - RFK Office
>>> 838 Washington Street                   (508) 893-9889 - FAX
>>> Holliston, MA 01746
>>>
>>>
>>
>>
>>
>>
>>--
>>Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>>Problem reports:       http://cygwin.com/problems.html
>>Documentation:         http://cygwin.com/docs.html
>>FAQ:                   http://cygwin.com/faq/
>
>
>
>--
>Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>Problem reports:       http://cygwin.com/problems.html
>Documentation:         http://cygwin.com/docs.html
>FAQ:                   http://cygwin.com/faq/ 


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

RE: sshd setup question

[Dan Adams]

Larry,
	here is the new transcript you asked for.
-----
dan@dan-infochi ~>cd /var
dan@dan-infochi /var>ls -l
total 0
drwxrwxrwx+   3 ???????? Users           0 May 17 15:07 cache
drwxr-xr-x+   2 dan      None            0 Sep  1 14:32 empty
drwxrwxrwx+   2 ???????? Users           0 Sep  2 16:29 log
drwxrwxrwx+   2 ???????? Users           0 Sep  1 14:35 run
drwxrwxrwx+   2 ???????? Users           0 May 17 15:07 tmp
dan@dan-infochi /var>chmod 744 empty
dan@dan-infochi /var>ls -l
total 0
drwxrwxrwx+   3 ???????? Users           0 May 17 15:07 cache
drwxr--r--+   2 dan      None            0 Sep  1 14:32 empty
drwxrwxrwx+   2 ???????? Users           0 Sep  2 16:29 log
drwxrwxrwx+   2 ???????? Users           0 Sep  1 14:35 run
drwxrwxrwx+   2 ???????? Users           0 May 17 15:07 tmp
dan@dan-infochi /var>chown SYSTEM empty
chown: `SYSTEM': invalid user
dan@dan-infochi /var>getfacl /var/empty
# file: /var/empty
# owner: dan
# group: None
user::rwx
group::r--
group:Administrators:rwx
mask:rwx
other:r--
default:group:Administrators:rwx
default:mask:rwx
dan@dan-infochi /var>
------
I did the same 'ls -l' items as before just so you knew the stuff is the
same as it was a few minutes ago. I appreciate all the help.


Dan Adams - dan@infochi.com
http://www.infochi.com

 

-----Original Message-----
From: Larry Hall [mailto:cygwin-lh@cygwin.com] 
Sent: Tuesday, September 02, 2003 6:03 PM
To: Dan Adams; 'Cygwin List'
Subject: RE: sshd setup question


Don't use "root" (I know it mentioned it).  Use "SYSTEM".  If that doesn't
work, send the output of 'getfacl /var/empty'.

BTW, you don't need to reply to my address (it's faked anyway).  I've 
redirected all response to me to the list so I'll get it regardless.

Larry


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

RE: sshd setup question

[Larry Hall]

SYSTEM isn't in your password file.  Also, given your listing below,
the primary owner of most of your directories is unknown to Cygwin.  
This means your password (and likely group) file is out of date.
Run 'mkpasswd -l >/etc/passwd' and 'mkgroup -l >/etc/group' and 
try this all again.

Larry


At 09:21 PM 9/2/2003, Dan Adams you wrote:
>Larry,
>    here is the new transcript you asked for.
>-----
>dan@dan-infochi ~>cd /var
>dan@dan-infochi /var>ls -l
>total 0
>drwxrwxrwx+   3 ???????? Users           0 May 17 15:07 cache
>drwxr-xr-x+   2 dan      None            0 Sep  1 14:32 empty
>drwxrwxrwx+   2 ???????? Users           0 Sep  2 16:29 log
>drwxrwxrwx+   2 ???????? Users           0 Sep  1 14:35 run
>drwxrwxrwx+   2 ???????? Users           0 May 17 15:07 tmp
>dan@dan-infochi /var>chmod 744 empty
>dan@dan-infochi /var>ls -l
>total 0
>drwxrwxrwx+   3 ???????? Users           0 May 17 15:07 cache
>drwxr--r--+   2 dan      None            0 Sep  1 14:32 empty
>drwxrwxrwx+   2 ???????? Users           0 Sep  2 16:29 log
>drwxrwxrwx+   2 ???????? Users           0 Sep  1 14:35 run
>drwxrwxrwx+   2 ???????? Users           0 May 17 15:07 tmp
>dan@dan-infochi /var>chown SYSTEM empty
>chown: `SYSTEM': invalid user
>dan@dan-infochi /var>getfacl /var/empty
># file: /var/empty
># owner: dan
># group: None
>user::rwx
>group::r--
>group:Administrators:rwx
>mask:rwx
>other:r--
>default:group:Administrators:rwx
>default:mask:rwx
>dan@dan-infochi /var>
>------
>I did the same 'ls -l' items as before just so you knew the stuff is the
>same as it was a few minutes ago. I appreciate all the help.
>
>
>Dan Adams - dan@infochi.com
>http://www.infochi.com
>
> 
>
>-----Original Message-----
>From: Larry Hall [mailto:cygwin-lh@cygwin.com] 
>Sent: Tuesday, September 02, 2003 6:03 PM
>To: Dan Adams; 'Cygwin List'
>Subject: RE: sshd setup question
>
>
>Don't use "root" (I know it mentioned it).  Use "SYSTEM".  If that doesn't
>work, send the output of 'getfacl /var/empty'.
>
>BTW, you don't need to reply to my address (it's faked anyway).  I've 
>redirected all response to me to the list so I'll get it regardless.
>
>Larry
>
>
>--
>Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>Problem reports:       http://cygwin.com/problems.html
>Documentation:         http://cygwin.com/docs.html
>FAQ:                   http://cygwin.com/faq/


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Larry Hall]

At 09:32 PM 9/1/2003, Dan Adams you wrote:
>You mentioned that it is not reaching the server through ssh, is there any
>way I can find out where the problem occurs at? I am using a command line of
>:
>    ssh -p 422 localhost
>to do this, I am not sure where in the networking the problem might lie at,
>is there any way that I can find out, or assist you in finding out?


Why are you using port 422?  Did you set up your sshd to use this port?


>The reason I was trying it with inetd, partly because it mentioned it on the
>website of yours, is because I have it working correctly for a couple of
>other services that are part of cygwin.
>
>One discrepancy I found between the website and the ssh-host-config file
>that was installed on my machine is
>file:
>    chown system.system /var/empty
>website
>    chown system:system /var/empty
>
>How should this be? If you notice the website has a colon on that line, the
>file has a period on that line.


Either works.


>The website I am referring to is: http://tech.erdelynet.com/cygwin-sshd.html


Hm.  I thought I was clear about this.  tech.erdelynet.com has no 
affiliation with cygwin.com.  This list can't answer questions about
information your find at tech.erdelynet.com.  Sorry.  If you have 
questions about tech.erdelynet.com, address them there.


>-- 
>Dan Adams - dan@infochi.com
>http://www.infochi.com
>
>
>"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>news:5.1.0.14.0.20030901200938.01f7e0c0@127.0.0.1...
>> You're not reaching the server.  The read of the basic version
>identification
>> is failing.  If the client and the server can't understand what version of
>> ssh is running on either end, they don't talk.  So you're not reaching the
>> server through ssh.
>>
>> Sorry I don't know much about setting up ssh under inetd.  Is there a
>reason
>> not to set it up as the documentation suggests?  I can vouch for things
>> working that way.
>>
>> Larry
>>
>>
>> At 06:38 PM 9/1/2003, Dan Adams you wrote:
>> >Thanks for the comment about cygrunsrv and the method of removing service
>> >from win2k That worked well
>> >
>> >Since I have inetd working well. I have a telnet server and also a FTP
>> >server, but neither is available outside of my firewall. I thought that I
>> >would try and see if I could use the sshd server that I just setup via
>the
>> >inetd thing. When I did this, I got an error message of:
>> >
>> >ssh_exchange_identification: read: Connection reset by peer
>> >
>> >What would this mean? This is the only error message that I have been
>> >getting from the ssh deamon when I try and connect, and even before I ran
>> >that setup script.
>> >
>> >Dan Adams - dan@infochi.com
>> >http://www.infochi.com
>> >
>> >
>> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>> >news:5.1.0.14.0.20030901180444.01f69c90@127.0.0.1...
>> >> OK, visit <http://cygwin.com/problems.html> and provide the requested
>> >info.
>> >> Also, send along (attached too) your /etc/passwd and /etc/group files.
>> >The
>> >> actual transcript of your attempt to run chown would be helpful too.
>> >>
>> >> cygrunsrv -E <service name> followed by cygrunsrv -R <service name>
>will
>> >> stop and remove a service.
>> >>
>> >> Larry
>> >>
>> >>
>> >> At 06:04 PM 9/1/2003, Dan Adams you wrote:
>> >> >I tried the directions at the site, and when it did the chown
>> >system.system
>> >> >/var/empty command. It errors out, saying that the user is unknown. It
>> >seems
>> >> >to not want to start the service after that point. Any more
>suggestions.
>> >> >Also does anyone know how to remove a service from the listong in
>Win2k
>> >once
>> >> >it is no longer desired. I am hoping to change from telnet/ftp to ssh
>> >access
>> >> >which means I would be able to get rid of the service of inetd that is
>in
>> >my
>> >> >win2k control panel thing.
>> >> >
>> >> >Dan Adams - dan@infochi.com
>> >> >http://www.infochi.com
>> >> >
>> >> >
>> >> >"Larry Hall" <cygwin-lh@cygwin.com> wrote in message
>> >> >news:5.1.0.14.0.20030901172200.01f49928@127.0.0.1...
>> >> >> At 05:28 PM 9/1/2003, Krzysztof Duleba you wrote:
>> >> >> >Dan Adams" wrote
>> >> >> >
>> >> >> >> Does anyone know if there is either a script that will automate
>the
>> >> >> >process
>> >> >> >> of setting up an ssh server? Or is there a tutorial setup page?
>> >> >> >
>> >> >> >http://tech.erdelynet.com/cygwin-sshd.html
>> >> >>
>> >> >>
>> >> >> And please follow-up with any questions generated from following the
>> >> >> directions at this site with tech.erdelynet.com.  The supported
>> >> >information
>> >> >> for setting up Cygwin's OpenSSH distribution is
>> >> >> /usr/doc/Cygwin/openssh-*.README.  It's the only source of
>information
>> >> >this
>> >> >> list will entertain questions about.
>> >> >>
>> >> >> Thanks,
>> >> >>
>> >> >>
>> >> >> Larry Hall                              http://www.rfk.com
>> >> >> RFK Partners, Inc.                      (508) 893-9779 - RFK Office
>> >> >> 838 Washington Street                   (508) 893-9889 - FAX
>> >> >> Holliston, MA 01746
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >--
>> >> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> >> >Problem reports:       http://cygwin.com/problems.html
>> >> >Documentation:         http://cygwin.com/docs.html
>> >> >FAQ:                   http://cygwin.com/faq/
>> >>
>> >>
>> >
>> >
>> >
>> >
>> >--
>> >Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> >Problem reports:       http://cygwin.com/problems.html
>> >Documentation:         http://cygwin.com/docs.html
>> >FAQ:                   http://cygwin.com/faq/
>>
>> --
>> Larry Hall                              http://www.rfk.com
>> RFK Partners, Inc.                      (508) 893-9779 - RFK Office
>> 838 Washington Street                   (508) 893-9889 - FAX
>> Holliston, MA 01746
>>
>>
>
>
>
>
>--
>Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>Problem reports:       http://cygwin.com/problems.html
>Documentation:         http://cygwin.com/docs.html
>FAQ:                   http://cygwin.com/faq/

--
Larry Hall                              http://www.rfk.com
RFK Partners, Inc.                      (508) 893-9779 - RFK Office
838 Washington Street                   (508) 893-9889 - FAX
Holliston, MA 01746                     


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: sshd setup question

[Larry Hall]

At 05:07 PM 9/1/2003, Dan Adams you wrote:
>Does anyone know if there is either a script that will automate the process
>of setting up an ssh server? Or is there a tutorial setup page?
>
>Dan Adams - dan@infochi.com
>http://www.infochi.com
>


You mean other than /usr/doc/Cygwin/openssh-*.README?



Larry Hall                              http://www.rfk.com
RFK Partners, Inc.                      (508) 893-9779 - RFK Office
838 Washington Street                   (508) 893-9889 - FAX
Holliston, MA 01746                     


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/