Is there someone who have a same problem ?

Is there someone who have a same problem ?

[kou1okada]

If you are using the cygwin64 under the Windows 8, please check a
following command sequence and please tell me a result.

#------------------
uname -srvmp
cygcheck -c | grep ca-certificates
ls -lnG /etc/setup/ca-certificates.lst.gz
find /etc/pki/ca-trust/extracted/ -mindepth 1 -type f -not -iname
README -exec ls -lnG {} +
wget -O /dev/null https://google.com
#------------------

Thanks.

---------
kou1okada
https://github.com/kou1okada

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[Yaakov (Cygwin/X)]

On 2014-01-21 22:18, kou1okada wrote:
> If you are using the cygwin64 under the Windows 8, please check a
> following command sequence and please tell me a result.
>
> #------------------
> uname -srvmp
> cygcheck -c | grep ca-certificates
> ls -lnG /etc/setup/ca-certificates.lst.gz
> find /etc/pki/ca-trust/extracted/ -mindepth 1 -type f -not -iname
> README -exec ls -lnG {} +
> wget -O /dev/null https://google.com
> #------------------

WFM on my main Win7 system and a fresh Win8.1 installation.  If there 
are no non-empty files (besides README) in /etc/pki/ca-trust, it means 
the postinstall script didn't finish successfully.  The most likely 
cause would be choosing not to install all dependencies when prompted, 
but to be sure:

http://cygwin.com/problems.html


Yaakov


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[kou1okada]

Sorry, I made a mistake.
The parent article of this thread is
http://cygwin.com/ml/cygwin/2014-01/msg00262.html.

I tried to install cygwin64 to Windows 7 Ultimate and Windows8 as below:
$ setup-x86_64 -s http://ftp.jaist.ac.jp/pub/cygwin -P wget,ca-certificates

Windows 7 doesn't have no problems.
But Windows 8 causes a problem at verify SSL certification.
Maybe the cause of this problem is not dependencies.
I believe that there is a problem when p11-kit command runs on the
cygwin64 under Windows 8.

For details, please see below:
http://cygwin.com/ml/cygwin/2014-01/msg00262.html

2014/1/22 Yaakov (Cygwin/X) <yselkowitz@users.sourceforge.net>:
> On 2014-01-21 22:18, kou1okada wrote:
>>
>> If you are using the cygwin64 under the Windows 8, please check a
>> following command sequence and please tell me a result.
>>
>> #------------------
>> uname -srvmp
>> cygcheck -c | grep ca-certificates
>> ls -lnG /etc/setup/ca-certificates.lst.gz
>> find /etc/pki/ca-trust/extracted/ -mindepth 1 -type f -not -iname
>> README -exec ls -lnG {} +
>> wget -O /dev/null https://google.com
>> #------------------
>
>
> WFM on my main Win7 system and a fresh Win8.1 installation.  If there are no
> non-empty files (besides README) in /etc/pki/ca-trust, it means the
> postinstall script didn't finish successfully.  The most likely cause would
> be choosing not to install all dependencies when prompted, but to be sure:
>
> http://cygwin.com/problems.html
>
>
> Yaakov
>
>
> --
> Problem reports:       http://cygwin.com/problems.html
> FAQ:                   http://cygwin.com/faq/
> Documentation:         http://cygwin.com/docs.html
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[Tim Prince]

On 1/22/2014 3:35 AM, kou1okada wrote:
> 2014/1/22 Yaakov (Cygwin/X) <yselkowitz@users.sourceforge.net>:
>> On 2014-01-21 22:18, kou1okada wrote:
>>> If you are using the cygwin64 under the Windows 8, please check a
>>> following command sequence and please tell me a result.
>>>
>>> #------------------
>>> uname -srvmp
>>> cygcheck -c | grep ca-certificates
>>> ls -lnG /etc/setup/ca-certificates.lst.gz
>>> find /etc/pki/ca-trust/extracted/ -mindepth 1 -type f -not -iname
>>> README -exec ls -lnG {} +
>>> wget -O /dev/null https://google.com
>>> #------------------
>>
>>
$ uname -srvmp
CYGWIN_NT-6.3 1.7.27(0.271/5/3) 2013-12-09 11:54 x86_64 unknown
...
$ wget -O /dev/null https://google.com
--2014-01-22 07:10:00--  https://google.com/
Resolving google.com... 2607:f8b0:4009:804::1006, 74.125.225.7, 
74.125.225.8, ..
.
Connecting to google.com|2607:f8b0:4009:804::1006|:443... failed: 
Connection tim
ed out.
Connecting to google.com|74.125.225.7|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://www.google.com/ [following]
--2014-01-22 07:10:21--  https://www.google.com/
Resolving www.google.com... 2607:f8b0:4009:802::1014, 74.125.225.112, 
74.125.225
.113, ...
Connecting to www.google.com|2607:f8b0:4009:802::1014|:443... failed: 
Connection
  timed out.
Connecting to www.google.com|74.125.225.112|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [text/html]
Saving to: `/dev/null'

     [ <=>                                   ] 10,876 --.-K/s   in 0.001s

2014-01-22 07:10:42 (9.74 MB/s) - `/dev/null' saved [10876]

-- 
Tim Prince


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[kou1okada]

Thanks !
It seems a result under the Windows 8.1, and verifying for SSL
certificate is succeeded.
Hmm, can someone provide results under the Windows 8 ?

I checked it on 2 environments which are Windows 8 version of SONY
VAIO Duo 11 and acer Aspire V5-171.
These 2 environments can not be installed correctly ca-certificates on
cygwin 64 at least.

---------
kou1okada
https://github.com/kou1okada

2014/1/22 Tim Prince <n8tm@aol.com>:
>
> On 1/22/2014 3:35 AM, kou1okada wrote:
>>
>> 2014/1/22 Yaakov (Cygwin/X) <yselkowitz@users.sourceforge.net>:
>>>
>>> On 2014-01-21 22:18, kou1okada wrote:
>>>>
>>>> If you are using the cygwin64 under the Windows 8, please check a
>>>> following command sequence and please tell me a result.
>>>>
>>>> #------------------
>>>> uname -srvmp
>>>> cygcheck -c | grep ca-certificates
>>>> ls -lnG /etc/setup/ca-certificates.lst.gz
>>>> find /etc/pki/ca-trust/extracted/ -mindepth 1 -type f -not -iname
>>>> README -exec ls -lnG {} +
>>>> wget -O /dev/null https://google.com
>>>> #------------------
>>>
>>>
>>>
> $ uname -srvmp
> CYGWIN_NT-6.3 1.7.27(0.271/5/3) 2013-12-09 11:54 x86_64 unknown
> ...
> $ wget -O /dev/null https://google.com
> --2014-01-22 07:10:00--  https://google.com/
> Resolving google.com... 2607:f8b0:4009:804::1006, 74.125.225.7,
> 74.125.225.8, ..
> .
> Connecting to google.com|2607:f8b0:4009:804::1006|:443... failed: Connection
> tim
> ed out.
> Connecting to google.com|74.125.225.7|:443... connected.
> HTTP request sent, awaiting response... 301 Moved Permanently
> Location: https://www.google.com/ [following]
> --2014-01-22 07:10:21--  https://www.google.com/
> Resolving www.google.com... 2607:f8b0:4009:802::1014, 74.125.225.112,
> 74.125.225
> .113, ...
> Connecting to www.google.com|2607:f8b0:4009:802::1014|:443... failed:
> Connection
>  timed out.
> Connecting to www.google.com|74.125.225.112|:443... connected.
> HTTP request sent, awaiting response... 200 OK
> Length: unspecified [text/html]
> Saving to: `/dev/null'
>
>     [ <=>                                   ] 10,876 --.-K/s   in 0.001s
>
> 2014-01-22 07:10:42 (9.74 MB/s) - `/dev/null' saved [10876]
>
> --
> Tim Prince
>
>
>
> --
> Problem reports:       http://cygwin.com/problems.html
> FAQ:                   http://cygwin.com/faq/
> Documentation:         http://cygwin.com/docs.html
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[Adam Dinwoodie]

On 22 January 2014 16:29, kou1okada wrote:
> Thanks !
> It seems a result under the Windows 8.1, and verifying for SSL
> certificate is succeeded.
> Hmm, can someone provide results under the Windows 8 ?
>
> I checked it on 2 environments which are Windows 8 version of SONY
> VAIO Duo 11 and acer Aspire V5-171.
> These 2 environments can not be installed correctly ca-certificates on
> cygwin 64 at least.
>
> ---------
> kou1okada
> https://github.com/kou1okada
>
> 2014/1/22 Tim Prince <<snip>>:

Please don't top post, and please don't include email addresses in your
replies.

See http://cygwin.com/acronyms/#PCYMTNQREAIYR,
http://cygwin.com/lists.html, and http://cygwin.com/acronyms/#TOFU.

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[Balaji Venkataraman]

On Wed, Jan 22, 2014 at 8:36 AM, Adam Dinwoodie wrote:

> See http://cygwin.com/acronyms/#PCYMTNQREAIYR,
> http://cygwin.com/lists.html, and http://cygwin.com/acronyms/#TOFU.

Sorry - if this is off topic.

How did those emails make it through? Whenever I have accidentally
included the sender's email address my email was rejected. And I would
appreciate any tips on configuring browser based Gmail from not
quoting real email addresses.

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[Csaba Raduly]

On Wed, Jan 22, 2014 at 6:15 PM, Balaji Venkataraman  wrote:
(snip)
> And I would
> appreciate any tips on configuring browser based Gmail from not
> quoting real email addresses.

AFAIK it's not possible. I always had to delet those manually (like
yours in this reply).
Plus, the blasted thing seems to default to top-posting nowadays :(

Csaba
-- 
GCS a+ e++ d- C++ ULS$ L+$ !E- W++ P+++$ w++$ tv+ b++ DI D++ 5++
The Tao of math: The numbers you can count are not the real numbers.
Life is complex, with real and imaginary parts.
"Ok, it boots. Which means it must be bug-free and perfect. " -- Linus Torvalds
"People disagree with me. I just ignore them." -- Linus Torvalds

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[Thomas Wolff]

Am 22.01.2014 17:36, schrieb Adam Dinwoodie:
> On 22 January 2014 16:29, kou1okada wrote:
>> Thanks !
>> It seems a result under the Windows 8.1, and verifying for SSL
>> certificate is succeeded.
>> Hmm, can someone provide results under the Windows 8 ?
>>
>> I checked it on 2 environments which are Windows 8 version of SONY
>> VAIO Duo 11 and acer Aspire V5-171.
>> These 2 environments can not be installed correctly ca-certificates on
>> cygwin 64 at least.
>>
>> ---------
>> kou1okada
>> https://github.com/kou1okada
>>
>> 2014/1/22 Tim Prince <<snip>>:
> Please don't top post, and please don't include email addresses in your
> replies.
And please use meaningful subjects.
Thomas

---
Diese E-Mail ist frei von Viren und Malware, denn der avast! Antivirus Schutz ist aktiv.
http://www.avast.com


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[kou1okada]

> And please use meaningful subjects.
> Thomas

Sorry.
I replied to my previous post (
http://cygwin.com/ml/cygwin/2014-01/msg00262.html ) with the Sent
folder of GMail.
So I thought the mail subject is meaningful enough on the thread.
But in fact "References" field of mail header was not appended.
Because that was just an accident, sorry.

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[kou1okada]

> Please don't top post, and please don't include email addresses in your
> replies.

Oops, I'm sorry.
I didn't care so that was inserted automatically.
I'll care it.

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[Yaakov (Cygwin/X)]

On 2014-01-22 02:35, kou1okada wrote:
> Windows 7 doesn't have no problems.
> But Windows 8 causes a problem at verify SSL certification.
> Maybe the cause of this problem is not dependencies.

No, it seems not.

> I believe that there is a problem when p11-kit command runs on the
> cygwin64 under Windows 8.

Confirmed with a fresh Windows 8 x64 installation, but not with 8.1. 
I'll have to look into this further.


Yaakov


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Win8 issue with pthread_once in ctor? (Re: Is there someone who have a same problem ?)

[Yaakov (Cygwin/X)]

On 2014-01-22 15:56, Yaakov (Cygwin/X) wrote:
>> I believe that there is a problem when p11-kit command runs on the
>> cygwin64 under Windows 8.
>
> Confirmed with a fresh Windows 8 x64 installation, but not with 8.1.
> I'll have to look into this further.

Here's what I've found so far:

So far only with Cygwin64 on Windows 8.0 x64 (but not with Cygwin32 even 
on 8.0 x64, nor with Cygwin64 on Windows 7 or 8.1), running any of the 
p11-kit commands in ca-certificates' postinstall under strace shows an 
exception c0000005 at 0x180134b75 immediately after loading 
/usr/lib/pkcs11/p11-kit-trust.so, which translates to:

$ addr2line -fp -e /usr/bin/cygwin1.dll 0x180134b75
verifyable_object_isvalid at 
/usr/src/debug/cygwin-1.7.27-2/winsup/cygwin/thread.cc:144

And eventually on a call to that function:

verifyable_object_isvalid (objectptr=objectptr@entry=0x239c68, 
magic=magic@entry=3742232649, static_ptr1=static_ptr1@entry=0x0, 
static_ptr2=static_ptr2@entry=0x0, static_ptr3=static_ptr3@entry=0x0)
at /usr/src/debug/cygwin-1.7.27-2/winsup/cygwin/thread.cc:140
140   if((static_ptr1 && *object == static_ptr1) ||
144   if((*object)->magic != magic)
[Inferior 1 exited with code 030000000005]

Now the strange thing about this module is that it has a constructor 
which calls pthread_once() on a function which creates a recursive 
mutex, so just dlopen()ing is enough.  Unfortunately, my attempts to 
reproduce this with an STC have not been successful.

Corinna, cgf, any insights?


Yaakov


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Win8 issue with pthread_once in ctor? (Re: Is there someone who have a same problem ?)

[Corinna Vinschen]

[-- Attachment #1: Type: text/plain, Size: 2018 bytes --]

On Jan 22 23:20, Yaakov (Cygwin/X) wrote:
> On 2014-01-22 15:56, Yaakov (Cygwin/X) wrote:
> >>I believe that there is a problem when p11-kit command runs on the
> >>cygwin64 under Windows 8.
> >
> >Confirmed with a fresh Windows 8 x64 installation, but not with 8.1.
> >I'll have to look into this further.
> 
> Here's what I've found so far:
> 
> So far only with Cygwin64 on Windows 8.0 x64 (but not with Cygwin32
> even on 8.0 x64, nor with Cygwin64 on Windows 7 or 8.1), running any
> of the p11-kit commands in ca-certificates' postinstall under strace
> shows an exception c0000005 at 0x180134b75 immediately after loading
> /usr/lib/pkcs11/p11-kit-trust.so, which translates to:
> 
> $ addr2line -fp -e /usr/bin/cygwin1.dll 0x180134b75
> verifyable_object_isvalid at
> /usr/src/debug/cygwin-1.7.27-2/winsup/cygwin/thread.cc:144
> 
> And eventually on a call to that function:
> 
> verifyable_object_isvalid (objectptr=objectptr@entry=0x239c68,
> magic=magic@entry=3742232649, static_ptr1=static_ptr1@entry=0x0,
> static_ptr2=static_ptr2@entry=0x0,
> static_ptr3=static_ptr3@entry=0x0)
> at /usr/src/debug/cygwin-1.7.27-2/winsup/cygwin/thread.cc:140
> 140   if((static_ptr1 && *object == static_ptr1) ||
> 144   if((*object)->magic != magic)
> [Inferior 1 exited with code 030000000005]
> 
> Now the strange thing about this module is that it has a constructor
> which calls pthread_once() on a function which creates a recursive
> mutex, so just dlopen()ing is enough.  Unfortunately, my attempts to
> reproduce this with an STC have not been successful.
> 
> Corinna, cgf, any insights?

Except for the content of object apparently being off, no.  It would
be helpful to build p11-kit with debugging and without optimization
and then step right into it, otherwise it's pretty hard to say
anything useful.


Corinna

-- 
Corinna Vinschen                  Please, send mails regarding Cygwin to
Cygwin Maintainer                 cygwin AT cygwin DOT com
Red Hat

[-- Attachment #2: Type: application/pgp-signature, Size: 819 bytes --]

Re: Win8 issue with pthread_once in ctor? (Re: Is there someone who have a same problem ?)

[Christopher Faylor]

On Thu, Jan 23, 2014 at 11:32:09AM +0100, Corinna Vinschen wrote:
>On Jan 22 23:20, Yaakov (Cygwin/X) wrote:
>> On 2014-01-22 15:56, Yaakov (Cygwin/X) wrote:
>> >>I believe that there is a problem when p11-kit command runs on the
>> >>cygwin64 under Windows 8.
>> >
>> >Confirmed with a fresh Windows 8 x64 installation, but not with 8.1.
>> >I'll have to look into this further.
>> 
>> Here's what I've found so far:
>> 
>> So far only with Cygwin64 on Windows 8.0 x64 (but not with Cygwin32
>> even on 8.0 x64, nor with Cygwin64 on Windows 7 or 8.1), running any
>> of the p11-kit commands in ca-certificates' postinstall under strace
>> shows an exception c0000005 at 0x180134b75 immediately after loading
>> /usr/lib/pkcs11/p11-kit-trust.so, which translates to:
>> 
>> $ addr2line -fp -e /usr/bin/cygwin1.dll 0x180134b75
>> verifyable_object_isvalid at
>> /usr/src/debug/cygwin-1.7.27-2/winsup/cygwin/thread.cc:144
>> 
>> And eventually on a call to that function:
>> 
>> verifyable_object_isvalid (objectptr=objectptr@entry=0x239c68,
>> magic=magic@entry=3742232649, static_ptr1=static_ptr1@entry=0x0,
>> static_ptr2=static_ptr2@entry=0x0,
>> static_ptr3=static_ptr3@entry=0x0)
>> at /usr/src/debug/cygwin-1.7.27-2/winsup/cygwin/thread.cc:140
>> 140   if((static_ptr1 && *object == static_ptr1) ||
>> 144   if((*object)->magic != magic)
>> [Inferior 1 exited with code 030000000005]
>> 
>> Now the strange thing about this module is that it has a constructor
>> which calls pthread_once() on a function which creates a recursive
>> mutex, so just dlopen()ing is enough.  Unfortunately, my attempts to
>> reproduce this with an STC have not been successful.
>> 
>> Corinna, cgf, any insights?
>
>Except for the content of object apparently being off, no.  It would
>be helpful to build p11-kit with debugging and without optimization
>and then step right into it, otherwise it's pretty hard to say
>anything useful.

What she said.

cgf

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[Yaakov (Cygwin/X)]

On 2014-01-23 04:32, Corinna Vinschen wrote:
> On Jan 22 23:20, Yaakov (Cygwin/X) wrote:
>> Now the strange thing about this module is that it has a constructor
>> which calls pthread_once() on a function which creates a recursive
>> mutex, so just dlopen()ing is enough.  Unfortunately, my attempts to
>> reproduce this with an STC have not been successful.
>>
>> Corinna, cgf, any insights?
>
> Except for the content of object apparently being off, no.  It would
> be helpful to build p11-kit with debugging and without optimization
> and then step right into it, otherwise it's pretty hard to say
> anything useful.

And, of course, without optimization it works.  So, I managed to narrow 
this down to the ctor itself: compiling it with -O0 or -O1 works, but 
not with -O2 or -O3; other functions seem to be fine at -O2.  The 
diffstat between the resulting assemblies of that file is huge, so I 
haven't diagnosed the actual cause yet.  Feel free to let me know if 
you're interested. :-)

In the meantime, the workaround is easy, so I just uploaded 
p11-kit-0.18.7-2 and ca-certificates-1.96-2 for x64 only.  If you are 
running 64-bit Cygwin on Windows 8.0 x64, those releases should fix this 
for you.


Yaakov


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[kou1okada]

> And, of course, without optimization it works.  So, I managed to narrow this
> down to the ctor itself: compiling it with -O0 or -O1 works, but not with
> -O2 or -O3; other functions seem to be fine at -O2.  The diffstat between
> the resulting assemblies of that file is huge, so I haven't diagnosed the
> actual cause yet.  Feel free to let me know if you're interested. :-)
>
> In the meantime, the workaround is easy, so I just uploaded p11-kit-0.18.7-2
> and ca-certificates-1.96-2 for x64 only.  If you are running 64-bit Cygwin
> on Windows 8.0 x64, those releases should fix this for you.

Oh! It's brilliant!

I checked it.
I reinstalled p11-kit, p11-kit-trust and libp11-kit0.
And it works fine at the cygwin64 under the Windows 8.

Thanks so much!

---------
kou1okada

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple

Re: Is there someone who have a same problem ?

[Yaakov (Cygwin/X)]

On 2014-01-22 15:56, Yaakov (Cygwin/X) wrote:
>> I believe that there is a problem when p11-kit command runs on the
>> cygwin64 under Windows 8.
>
> Confirmed with a fresh Windows 8 x64 installation, but not with 8.1.
> I'll have to look into this further.

As a temporary workaround, Win8 x64 users may download the following:

ftp://ftp.cygwinports.org/pub/cygwinports/temp/ca-certs-extracted-1.96-1.tar.xz

Then run (from an elevated prompt if necessary):

tar xf ca-certs-extracted-1.96-1.tar.xz -C /

HTH,


Yaakov


--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple