From: Matthew Lowther <m.lowther@standard-platforms.co.uk>
To: "'cygwin@sourceware.cygnus.com'" <cygwin@sourceware.cygnus.com>
Subject: text / binary mounts (sorry)
Date: Fri, 02 Jun 2000 01:01:00 -0000 [thread overview]
Message-ID: <6134A5899971D2118E6A00E029197F8F9DB68C@diamond.bssl.co.uk> (raw)
[-- Attachment #1: Type: text/plain, Size: 1591 bytes --]
Hullo,
I use cygwin (snapshot 05252000) , mainly to access cvs and make, so
I can build the same source on NT and unix.
When I check things out in CVS I don't want lots of Dos Line Feeds being
added.
This is OK, so long as I mount the relevant drive as a binary mount.
BUT is there anything I can setup to make all drives act as binary mounts
automatically.
The problem is that if a drive isn't mounted at all, then I get dos line
feeds at the end of each line. So people not accustomed to using bash use
cvs and unknowingly add dos line feeds to all the source files, this gets
repeated .... and we end up with lots and lots of horrible dos line feed
characters in all the source.
Thanks in advance for any help I may get, I'm scared to send this message
because I know there's been alot of mail about CR/LF issues, but I'm
desperatley hoping I can stop these ^M's infiltrating our source code.
Maff.
P.S. Problem description.
If I run bash and say change to the t drive
cd t:/
echo "bob" >fred
vi fred
->produces
bob^M
ie. with a dos line feed thing.
If I do mount -b t: /t
and do the above, it produces
bob
ie. no dos line feed.
But can I make echo "bob" > fred produce a file fred with no dos line feed
without having to make sure I've done the mount?
Attached is the cygcheck thing
. <<cygcheck.out>>
--
Matthew Lowther Direct Dial: +44 (0)1252 401033
Software Consultant Switchboard: +44 (0)1252 401000
Standard Platforms Limited Fax : +44 (0)1252 336934
http://www.standard-platforms.co.uk mailto:maff@bssl.co.uk
[-- Attachment #2: cygcheck.out --]
[-- Type: text/x-Algol68, Size: 13577 bytes --]
Cygnus Win95/NT Configuration Diagnostics
Current System Time: Thu Jun 1 17:29:41 2000
WinNT Ver 4.0 build 1381 Service Pack 4
Path: /WINNT/system32
/WINNT
/PROGRAM FILES/INFORMIX/BIN
/bin
/usr/local/bin
/tilcon-test
/mssdk/BIN/WINNT
/mssdk/BIN
%PATH%
/Program Files/DevStudio/sharedide/bin/ide
/Program Files/devstudio/sharedide/bin
/Program Files/DevStudio/vc/bin
SysDir: D:\WINNT\System32
WinDir: D:\WINNT
CYGWIN32 = `binmode ntea tty notitle'
PWD = `/usr/local/home/maff'
!EXITCODE = `00000080'
!I: = `I:\'
BACKUPPATH = `D:\WINNT\system32;D:\WINNT;D:\PROGRAM FILES\INFORMIX\BIN;d:\cygnus\cygwin-b20\H-i586-cygwin32\bin;d:\bin;d:\usr\local\bin;d:\usr\X11R6.4\bin;d:\tilcon-test'
BASEMAKE = `d:\mssdk\INCLUDE\BKOFFICE.MAK'
BATCHDIR = `p:\\batch\winnt'
BKOFFICE = `d:\mssdk\'
BLASTER = `A220 I5 D1 T4'
BSS_BIN_DIR = `d:\tilcon-test'
BSS_RUN_DIR = `d:\tilcon-test'
COMPUTERNAME = `KYLE'
COMSPEC = `D:\WINNT\system32\cmd.exe'
CPU = `i386'
DXSDKROOT = `d:\mssdk'
GETPAGEDIR = `p:\\getpage\winnt'
HOMEDRIVE = `I:'
HOMEPATH = `\'
HOMESHARE = `\\rara\homes'
HOSTNAME = `KYLE'
HOSTTYPE = `i586'
INCLUDE = `d:\mssdk\INCLUDE;d:\program files\devstudio\vc\include;d:\program files\devstudio\vc\atl\include;d:\program files\devstudio\vc\mfc\include'
INCLUDEDIR = `t:\build\heywood-project\src\winnt\include'
INETSDK = `d:\mssdk'
INFORMIXDIR = `D:\Informix'
KOFAXDIR = `u:\progra~1\kofax'
LIB = `d:\mssdk\LIB;d:\program files\devstudio\vc\lib;d:\program files\devstudio\vc\mfc\lib'
LIBDIR = `t:\build\heywood-project\src\winnt\lib'
LIBTOOLDIR = `p:\\libtool\winnt'
LOGNAME = `maff'
LOGONSERVER = `\\CARBON'
MACHTYPE = `i586-pc-cygwin32'
MSDEVDIR = `d:\Program Files\DevStudio\SharedIDE'
MSSDK = `d:\mssdk'
MSTOOLS = `d:\mssdk'
NAVINCDIR = `%NAVDIR%\include'
NAVLIBDIR = `%NAVDIR%\lib'
NUMBER_OF_PROCESSORS = `1'
OLDPWD = `/'
OS2LIBPATH = `D:\WINNT\system32\os2\dll;'
OS = `Windows_NT'
OSTYPE = `cygwin32'
PAGEDIR = `p:\\page\winnt'
PATHEXT = `.COM;.EXE;.BAT;.CMD'
PLDBSDIR = `p:\\pldbs\winnt'
PROCESSOR_ARCHITECTURE = `x86'
PROCESSOR_IDENTIFIER = `x86 Family 6 Model 7 Stepping 3, GenuineIntel'
PROCESSOR_LEVEL = `6'
PROCESSOR_REVISION = `0703'
PROMPT = `$P$G'
SHELL = `/bin/sh'
SHLVL = `1'
STSDIR = `p:\\storeserv\winnt'
SYSTEMDRIVE = `D:'
SYSTEMROOT = `D:\WINNT'
TCPKITDIR = `p:\\tcp\win32client\toolkit'
TEMP = `D:\TEMP'
TERM = `cygwin'
TMP = `D:\TEMP'
USERDOMAIN = `BSSL'
USERNAME = `maff'
USERPROFILE = `D:\WINNT\Profiles\maff'
WINDIR = `D:\WINNT'
_ = `/bin/cygcheck'
_SRCDIR_ = `p:\'
TZ = `GMTST0GMTDT-1,M3.5.0/2,M10.5.0/3'
HKEY_CURRENT_USER\Software\Cygnus Solutions
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2
(default) = `/cygdrive'
cygdrive flags = 0x00000020
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/
(default) = `d:'
flags = 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\mounts v2\/t
(default) = `t:'
flags = 0x00000002
HKEY_CURRENT_USER\Software\Cygnus Solutions\Cygwin\Program Options
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\00
(default) = `D:'
unix = `/'
fbinary = 0x00000000
fsilent = 0x00000000
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\01
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\02
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\03
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\04
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\05
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\06
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\07
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\08
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\09
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0A
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0B
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0C
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0D
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0E
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0F
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\10
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\11
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\12
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\13
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\14
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\15
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\16
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\17
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\18
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\19
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1A
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1B
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1C
HKEY_CURRENT_USER\Software\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1D
HKEY_CURRENT_USER\Software\Microsoft\Ftp\Accounts\sourceware.cygnus.com
(default) = `anonymous'
Login Attributes = 0x00000002
HKEY_CURRENT_USER\Software\Microsoft\Ftp\Accounts\sourceware.cygnus.com\anonymous
(default) = `'
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Installed Components
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\Installed Components\D:/
(default) = `20000517'
bash = `0002.0004'
binutils = `19990818.0001'
bison = `0000'
byacc = `0000'
bzip = `0000'
clear = `0001.0000'
cygwin = `0001.0001.0001'
dejagnu = `0000'
diff = `0000'
expect = `0000'
fileutils = `0000'
findutils = `0000'
flex = `0000'
gawk = `0000'
gcc = `0002.0095.0002.0001'
gdb = `20000415'
gperf = `0000'
grep = `0000'
groff = `0001.011a.0001'
gzip = `0000'
inetutils = `0001.0003.0002.0002'
less = `0000'
libpng = `0001.0000.0006.0001'
login = `0001.0002'
m = `0000'
make = `0000'
man = `0001.005g.0002'
patch = `0000'
sed = `0003.0002.0001'
shellutils = `0000'
tar = `0000'
tcltk = `0000'
termcap = `0002'
texinfo = `0000'
textutils = `0000'
time = `0000'
zlib = `0001.0001.0003.0001'
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\Cygwin\mounts v2
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\00
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\01
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\02
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\03
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\04
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\05
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\06
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\07
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\08
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\09
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0A
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0B
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0C
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0D
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0E
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\0F
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\10
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\11
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\12
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\13
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\14
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\15
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\16
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\17
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\18
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\19
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1A
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1B
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1C
HKEY_LOCAL_MACHINE\SOFTWARE\Cygnus Solutions\CYGWIN.DLL setup\b15.0\mounts\1D
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Cygnus Cygwin B20
(default) = `D:\WINNT\IsUninst.exe -fd:\cygnus\cygwin-b20\Uninst.isu'
DisplayName = `Cygwin B20'
a: fd N/A N/A
c: hd FAT 1027Mb 26% CP UN
d: hd NTFS 5122Mb 79% CP CS UN PA FC
e: cd N/A N/A
f: net FAT 2047Mb 82% CP UN MS-DOS_6
g: net NTFS 5294Mb 92% PA shared
h: net NTFS 14428Mb 100% PA home
i: net NTFS 14428Mb 100% PA maff
j: net Samba 962Mb 92% CP UN home
k: net NTFS 5122Mb 76% CP CS UN PA FC
l: net NTFS 960Mb 81% PA work
m: net NTFS 1780Mb 88% CP CS UN PA FC NTFS Disk
o: net NTFS 5294Mb 86% PA tpsoft
p: net NTFS 13878Mb 88% PA products
q: net Samba 1979Mb 97% CP UN PRODUCTS
r: net NTFS 5294Mb 92% PA ntdev
s: net NTFS 3796Mb 91% CP CS UN PA FC
t: net NTFS 4094Mb 74% CP CS UN PA FC
u: net FAT 2047Mb 36% CP UN WIN 95
v: net NTFS 7993Mb 2% CP CS UN PA FC cache
w: net NTFS 960Mb 81% PA work
x: net NTFS 5122Mb 79% CP CS UN PA FC
d: / user binmode
t: /t user binmode
Found: d:\bin\bash.exe
Found: \bin\bash.exe
Warning: d:\bin\bash.exe hides \bin\bash.exe
Found: d:\bin\cat.exe
Found: \bin\cat.exe
Warning: d:\bin\cat.exe hides \bin\cat.exe
Found: d:\bin\cpp.exe
Found: \bin\cpp.exe
Warning: d:\bin\cpp.exe hides \bin\cpp.exe
Found: d:\bin\find.exe
Found: \bin\find.exe
Warning: d:\bin\find.exe hides \bin\find.exe
Found: d:\bin\gcc.exe
Found: \bin\gcc.exe
Warning: d:\bin\gcc.exe hides \bin\gcc.exe
Found: d:\bin\gdb.exe
Found: \bin\gdb.exe
Warning: d:\bin\gdb.exe hides \bin\gdb.exe
Found: d:\bin\ld.exe
Found: \bin\ld.exe
Warning: d:\bin\ld.exe hides \bin\ld.exe
Found: d:\bin\ls.exe
Found: \bin\ls.exe
Warning: d:\bin\ls.exe hides \bin\ls.exe
Found: d:\bin\make.exe
Found: \bin\make.exe
Warning: d:\bin\make.exe hides \bin\make.exe
Found: d:\bin\sh.exe
Found: \bin\sh.exe
Warning: d:\bin\sh.exe hides \bin\sh.exe
115k 1999/09/14 d:\bin\cygitcl30.dll - os=4.0 img=1.0 sys=4.0
"cygitcl30.dll" v0.0 ts=1999/9/14 3:46
63k 1999/09/14 d:\bin\cygitk30.dll - os=4.0 img=1.0 sys=4.0
"cygitk30.dll" v0.0 ts=1999/9/14 3:47
474k 1999/09/14 d:\bin\cygtcl80.dll - os=4.0 img=1.0 sys=4.0
"cygtcl80.dll" v0.0 ts=1999/9/14 3:31
19k 1999/09/14 d:\bin\cygtclpip80.dll - os=4.0 img=1.0 sys=4.0
24k 1999/09/14 d:\bin\cygtclreg80.dll - os=4.0 img=1.0 sys=4.0
"cygtclreg80.dll" v0.0 ts=1999/9/14 3:31
768k 1999/09/14 d:\bin\cygtk80.dll - os=4.0 img=1.0 sys=4.0
"cygtk80.dll" v0.0 ts=1999/9/14 3:36
569k 2000/05/15 d:\bin\cygwin.presnapshot.dll - os=4.0 img=1.0 sys=4.0
"cygwin1.dll" v0.0 ts=2000/5/15 4:48
604k 2000/06/01 d:\bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0
"cygwin1.dll" v0.0 ts=2000/5/26 8:29
115k 1999/09/14 \bin\cygitcl30.dll - os=4.0 img=1.0 sys=4.0
"cygitcl30.dll" v0.0 ts=1999/9/14 3:46
63k 1999/09/14 \bin\cygitk30.dll - os=4.0 img=1.0 sys=4.0
"cygitk30.dll" v0.0 ts=1999/9/14 3:47
474k 1999/09/14 \bin\cygtcl80.dll - os=4.0 img=1.0 sys=4.0
"cygtcl80.dll" v0.0 ts=1999/9/14 3:31
19k 1999/09/14 \bin\cygtclpip80.dll - os=4.0 img=1.0 sys=4.0
24k 1999/09/14 \bin\cygtclreg80.dll - os=4.0 img=1.0 sys=4.0
"cygtclreg80.dll" v0.0 ts=1999/9/14 3:31
768k 1999/09/14 \bin\cygtk80.dll - os=4.0 img=1.0 sys=4.0
"cygtk80.dll" v0.0 ts=1999/9/14 3:36
569k 2000/05/15 \bin\cygwin.presnapshot.dll - os=4.0 img=1.0 sys=4.0
"cygwin1.dll" v0.0 ts=2000/5/15 4:48
604k 2000/06/01 \bin\cygwin1.dll - os=4.0 img=1.0 sys=4.0
"cygwin1.dll" v0.0 ts=2000/5/26 8:29
Use -h to see help about each section
next reply other threads:[~2000-06-02 1:01 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-06-02 1:01 Matthew Lowther [this message]
2000-06-02 6:35 Earnie Boyd
2000-06-02 9:02 ` Re[2]: " Egor Duda
2000-06-02 11:26 ` Chris Faylor
2000-06-02 11:50 ` Bob McGowan
2000-06-02 13:16 ` Chris Faylor
2000-06-02 14:03 ` Jeremy Sheeley
2000-06-02 14:05 ` Chris Faylor
2000-06-05 6:41 ` Jason Tishler
2000-06-05 8:48 ` Chris Faylor
2000-06-02 10:01 Parker, Ron
2000-06-02 10:13 Earnie Boyd
2000-06-02 10:26 Parker, Ron
2000-06-02 10:33 Parker, Ron
[not found] <200006021734.KAA06876@cygnus.com>
2000-06-02 11:28 ` Chris Faylor
2000-06-02 14:16 Parker, Ron
2000-06-02 14:26 Parker, Ron
[not found] <200006022116.OAA23714@cygnus.com>
2000-06-02 14:29 ` Chris Faylor
2000-06-02 14:53 ` Norman Vine
2000-06-02 14:36 David Bolen
2000-06-02 19:33 ` Chris Faylor
2000-06-02 14:42 Parker, Ron
[not found] <200006022142.OAA26463@cygnus.com>
2000-06-02 19:33 ` Chris Faylor
2000-06-02 19:45 David Bolen
2000-06-02 19:50 ` Chris Faylor
2000-06-05 9:41 David Bolen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=6134A5899971D2118E6A00E029197F8F9DB68C@diamond.bssl.co.uk \
--to=m.lowther@standard-platforms.co.uk \
--cc=cygwin@sourceware.cygnus.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).