* cin and read(*,*) not waiting for kbd input in gdb
@ 2020-01-16 21:03 Rockefeller, Harry
2020-01-17 15:40 ` Jon Turney
0 siblings, 1 reply; 7+ messages in thread
From: Rockefeller, Harry @ 2020-01-16 21:03 UTC (permalink / raw)
To: cygwin
[-- Attachment #1: Type: text/plain, Size: 2914 bytes --]
Both the Fortran and cpp used to work correctly when run in gdb.
FWIW, Both Fortran and cpp work correctly, stopping for keyboard input, when run outside of gdb.
But now, code simply doesn't stop to take keyboard input inside gdb.
I've tried simplifying cpp problem with simple code.
e.g.
#include <iostream> // to enable terminal printout
#include <cmath> // pow function
int main() {
float request_time_to_run(void);
float a=0.0f;
a = request_time_to_run();
printf ("a is %f\n", a);
}
float request_time_to_run() {
float tm = 0.0; // Time duration (sec)
std::string ans = ""; // interactive answer for time duration
std::cout << "Supply the equivalent of runtime in seconds. \n";
std::cout << "Note: time=0 will stop main. \n";
std::cin >> ans;
if ( (int)(ans[0]) < 48 || (int)(ans[0] > 57) ) {
tm = 1.0;
} else {
int i;
int j = 0;
tm = 0.0;
for (i=ans.length() - 1; i>=0; i--) {
tm += ((int)(ans[i]) - 48) * pow( 10, j++);
}
}
return tm;
}
But, simple stuff does run correctly in gdb stopping for terminal input at
std::cin >> ans;
FWIW, for simple cpp above neither the cout nor the cin works directly (not running in gdb).
But with complicated code using gdb step by step into this line eventually shows this:
"/wip/cygport-git/gdb/gdb-8.2.1-1.x86_64/src/gdb-8.2.1/gdb/infrun.c:2723: internal-error: void resume_1(gdb_signal): Assertion `pc_in_thread_step_range (pc, tp)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable."
Where the gdb line-of-code pointer is here:
virtual std::streamsize
xsputn(const char_type* __s, std::streamsize __n);
virtual int
sync()
> { return std::fflush(_M_file); }
virtual std::streampos
seekoff(std::streamoff __off, std::ios_base::seekdir __dir,
std::ios_base::openmode = std::ios_base::in | std::ios_base::out)
{
When I run the fortran software and do gdb step by step into the line having the read(*,*)
There seems to be an infinite loop. So when I just send the gdb continue
it fails with this info:
At line 40 of file jhx.f (unit = 5, file = 'stdin')
Fortran runtime error: End of file
Error termination. Backtrace:
#0 0xffffffffffffffff in ???
#1 0xffffffffffffffff in ???
#2 0xffffffffffffffff in ???
#3 0xffffffffffffffff in ???
#4 0xffffffffffffffff in ???
#5 0xffffffffffffffff in ???
#6 0xffffffffffffffff in ???
#7 0xffffffffffffffff in ???
#8 0xffffffffffffffff in ???
#9 0xffffffffffffffff in ???
#10 0xffffffffffffffff in ???
#11 0xffffffffffffffff in ???
#12 0xffffffffffffffff in ???
[Thread 7872.0x1e20 exited with code 2]
[Thread 7872.0x20f0 exited with code 2]
[Thread 7872.0x1b80 exited with code 2]
[Thread 7872.0x3e8 exited with code 2]
[Inferior 1 (process 7872) exited with code 02]
[-- Attachment #2: cygcheck.out --]
[-- Type: application/octet-stream, Size: 130689 bytes --]
Cygwin Package Information
Package Version Status
_autorebase 001007-1 OK
a2ps 4.14-3 OK
adwaita-icon-theme 3.26.1-1 OK
adwaita-themes 3.22.3-1 OK
alternatives 1.3.30c-10 OK
appstream 0.11.7-1 OK
archivemail 0.9.0-1 OK
aspell 0.60.8-1 OK
aspell-debuginfo 0.60.8-1 OK
aspell-en 2017.08.24.0-1 OK
at-spi2-core 2.26.2-1 OK
autoconf 13-1 OK
autoconf2.1 2.13-12 OK
autoconf2.5 2.69-4 OK
automake 11-1 OK
automake1.10 1.10.3-3 OK
automake1.11 1.11.6-3 OK
automake1.12 1.12.6-3 OK
automake1.13 1.13.4-2 OK
automake1.14 1.14.1-3 OK
automake1.15 1.15.1-2 OK
automake1.16 1.16.1-1 OK
automake1.4 1.4p6-11 OK
automake1.5 1.5-11 OK
automake1.6 1.6.3-12 OK
automake1.7 1.7.9-11 OK
automake1.8 1.8.5-11 OK
automake1.9 1.9.6-11 OK
base-cygwin 3.8-1 OK
base-files 4.3-2 OK
bash 4.4.12-3 OK
bcrypt 1.1-3 OK
biber 2.13-1 OK
binutils 2.29-1 OK
bitstream-vera-fonts 1.10-2 OK
build-docbook-catalog 1.5-2 OK
bzip2 1.0.8-1 OK
bzip2-debuginfo 1.0.8-1 OK
bzr 2.7.0+bzr6622-1 OK
bzr-fastimport 0.13.0-2 OK
ca-certificates 2.32-1 OK
catdoc 0.95-1 OK
catgets 2.10.0-1 OK
cgdb 0.6.7+20190803+gitb6326f1-1 OK
cgdb-debuginfo 0.6.7-1 OK
chm2pdf 0.9.1-3 OK
chmlib 0.40-1 OK
clang 8.0.1-1 OK
cmake 3.14.5-1 OK
cmake-debuginfo 3.14.5-1 OK
cmake-doc 3.14.5-1 OK
cmake-gui 3.14.5-1 OK
colorgcc 1.3.2-2 OK
compiler-rt 8.0.1-1 OK
coreutils 8.26-2 OK
cron 4.1-65 OK
crypt 2.1-1 OK
crypto-policies 20190218-1 OK
csih 0.9.11-1 OK
cvs2svn 2.4.0-1 OK
cygrunsrv 1.62-1 OK
cygutils 1.4.16-2 OK
cygutils-debuginfo 1.4.16-2 OK
cygutils-extra 1.4.16-2 OK
cygutils-x11 1.4.16-2 OK
cygwin 3.1.2-1 OK
cygwin-debuginfo 3.1.2-1 OK
cygwin-devel 3.1.2-1 OK
cygwin32 2.10.0-1 OK
cygwin32-gcc-debuginfo 6.4.0-1 OK
cygwin32-minizip 1.2.8-1 OK
cygwin32-zlib 1.2.8-1 OK
dash 0.5.9.1-1 OK
dblatex 0.3.10-1 OK
dbus 1.10.22-1 OK
dbus-x11 1.10.22-1 OK
dconf-service 0.26.1-1 OK
dejavu-fonts 2.37-1 OK
desktop-file-utils 0.23-1 OK
dia 0.97.3-1 OK
dialog 1.3-3.20170131 OK
diffutils 3.5-2 OK
djgpp-binutils 2.25-2 OK
djgpp-gcc-ada 5.4.0-1 OK
djgpp-gcc-core 5.4.0-1 OK
djgpp-gcc-debuginfo 5.4.0-1 OK
djgpp-gcc-fortran 5.4.0-1 OK
djgpp-gcc-g++ 5.4.0-1 OK
djgpp-gcc-objc 5.4.0-1 OK
djgpp-gcc-objc++ 5.4.0-1 OK
djgpp-runtime 2.05-1 OK
docbook-xml45 4.5-1 OK
docbook-xsl 1.77.1-1 OK
dos2unix 7.4.1-1 OK
dos2unix-debuginfo 7.4.1-1 OK
dri-drivers 19.1.6-1 OK
ed 1.15-1 OK
editrights 1.03-1 OK
emacs 26.3-2 OK
emacs-auctex 12.1-1 OK
emacs-clang-format 8.0.1-1 OK
emacs-cmake 3.14.5-1 OK
emacs-common 26.3-2 OK
emacs-debuginfo 26.3-2 OK
emacs-gettext 0.19.8.1-2 OK
emacs-X11 26.3-2 OK
email 3.2.3-git-2 OK
email-debuginfo 3.2.3-git-2 OK
exim 4.92.3-1 OK
extra-cmake-modules 5.43.0-1 OK
fcrackzip 1.0-1 OK
file 5.32-1 OK
findutils 4.6.0-1 OK
font-bitstream-vera-ttf 1.10-2 OK
font-tektronix-misc 2.6-5 OK
font-util 1.3.2-1 OK
font-util-debuginfo 1.3.2-1 OK
fontconfig 2.13.1-1 OK
gamin 0.1.10-15 OK
gawk 5.0.1-1 OK
gcc-ada 7.4.0-1 OK
gcc-cilkplus 7.4.0-1 OK
gcc-core 7.4.0-1 OK
gcc-debuginfo 7.4.0-1 OK
gcc-fortran 7.4.0-1 OK
gcc-g++ 7.4.0-1 OK
gcc-objc 7.4.0-1 OK
gcc-objc++ 7.4.0-1 OK
gcc-tools-epoch1-autoconf 2.59-2 OK
gcc-tools-epoch1-automake 1.9.6-2 OK
gcc-tools-epoch2-autoconf 2.64-2 OK
gcc-tools-epoch2-automake 1.11.6-1 OK
gccmakedep 1.0.3-1 OK
gconf-desktop-schemas 2.32.1-3 OK
GConf2 3.2.6-2 OK
gcr 3.20.0-1 OK
gdb 8.2.1-1 OK
gdb-debuginfo 8.2.1-1 OK
gdbm-debuginfo 1.18.1-1 OK
gdk-pixbuf2.0-svg 2.40.20-1 OK
getent 2.18.90-4 OK
gettext 0.19.8.1-2 OK
ghostscript 9.27-1 OK
ghostscript-fonts-other 6.0-1 OK
girepository-Atk1.0 2.26.1-1 OK
girepository-Atspi2.0 2.26.2-1 OK
girepository-cairo1.0 1.54.1-1 OK
girepository-GdkPixbuf2.0 2.36.11-1 OK
girepository-GLib2.0 1.54.1-1 OK
girepository-Gst1.0 1.12.5-1 OK
girepository-GstInterfaces1.0 1.12.5-1 OK
girepository-Gtk3.0 3.22.28-1 OK
girepository-HarfBuzz0.0 2.5.3-1 OK
girepository-Json1.0 1.4.2-1 OK
girepository-Pango1.0 1.40.14-1 OK
girepository-Secret1 0.18.5-1 OK
girepository-x11 1.54.1-1 OK
git 2.21.0-1 OK
git-email 2.21.0-1 OK
git-svn 2.21.0-1 OK
glib2.0-networking 2.54.1-1 OK
gnome-font-viewer 3.26.0-1 OK
gnome-font-viewer-debuginfo 3.26.0-1 OK
gnome-keyring 3.20.1-1 OK
gnome-menus 3.13.3-3 OK
gnome-mime-data 2.18.0-10 OK
gnome-sudoku 3.26.0-1 OK
gnupg 1.4.23-1 OK
gnuplot 5.2.8-1 OK
gnuplot-debuginfo 5.2.8-1 OK
grep 3.0-2 OK
groff 1.22.4-1 OK
groff-perl 1.22.4-1 OK
groff-X11 1.22.4-1 OK
gsettings-desktop-schemas 3.24.1-1 OK
gtk-update-icon-cache 3.22.28-1 OK
gtk2.0-engines-pixmap 2.24.32-1 OK
gv 3.7.4-1 OK
gzip 1.8-1 OK
gzip-debuginfo 1.8-1 OK
hexchat 2.14.2-1 OK
hexchat-perl 2.14.2-1 OK
hicolor-icon-theme 0.15-1 OK
hostname 3.13-1 OK
html2ps 1.0b7-2 OK
htmldoc 1.8.28-3 OK
httpd 2.4.39-1 OK
ImageMagick 6.9.10.11-1 OK
imake 1.0.8-1 OK
imake-debuginfo 1.0.8-1 OK
info 6.7-1 OK
ipc-utils 1.0-2 OK
iso-codes 4.3-1 OK
jpeg 1.5.3-1 OK
kcron 17.12.3-1 OK
kcron-debuginfo 17.12.3-1 OK
kf5-kdoctools 5.43.0-1 OK
khrplatform-devel 19.1.6-1 OK
ksudoku 17.12.3-1 OK
less 551-1 OK
libakonadiprotocolinternals1 1.13.0-6 OK
libanthy-common 9100h-2 OK
libanthy0 9100h-2 OK
libappstream4 0.11.7-1 OK
libapr1 1.6.5-1 OK
libapr1-devel 1.6.5-1 OK
libaprutil1 1.6.1-1 OK
libaprutil1-devel 1.6.1-1 OK
libarchive13 3.3.2-1 OK
libargon2_1 20171227-1 OK
libargp 20110921-3 OK
libart_lgpl_2_2 2.3.21-2 OK
libaspell-devel 0.60.8-1 OK
libaspell15 0.60.8-1 OK
libassuan0 2.5.3-1 OK
libasyncns0 0.8-1 OK
libatk-bridge2.0-devel 2.26.1-1 OK
libatk-bridge2.0_0 2.26.1-1 OK
libatk1.0-devel 2.26.1-1 OK
libatk1.0_0 2.26.1-1 OK
libatomic1 7.4.0-1 OK
libatspi-devel 2.26.2-1 OK
libatspi0 2.26.2-1 OK
libattica0.4 0.4.2-1 OK
libattr1 2.4.48-2 OK
libaudio2 1.9.3-1 OK
libautotrace3 0.31.1-19 OK
libavahi-client3 0.7-1 OK
libavahi-common3 0.7-1 OK
libavahi-glib1 0.7-1 OK
libblkid1 2.33.1-1 OK
libbonobo2_0 2.32.1-2 OK
libbonoboui2_0 2.24.5-2 OK
libboost_locale1.66 1.66.0-1 OK
libboost_system1.66 1.66.0-1 OK
libboost_thread1.66 1.66.0-1 OK
libbotan1.10_1 1.10.17-2 OK
libbrotlicommon1 1.0.7-1 OK
libbrotlidec1 1.0.7-1 OK
libbz2-devel 1.0.8-1 OK
libbz2_1 1.0.8-1 OK
libc++-devel 8.0.1-1 OK
libc++1 8.0.1-1 OK
libc++abi-devel 8.0.1-1 OK
libc++abi1 8.0.1-1 OK
libcairo-devel 1.16.0-1 OK
libcairo2 1.16.0-1 OK
libcanberra-gtk3_0 0.30-2 OK
libcanberra0 0.30-2 OK
libcatgets-devel 2.10.0-1 OK
libcatgets1 1.1-2 OK
libcdt5 2.40.1-4 OK
libcerf1 1.13-1 OK
libcfitsio3 3.360-1 OK
libcfitsio7 3.470-1 OK
libcgraph6 2.40.1-4 OK
libcharset1 1.14-3 OK
libchm0 0.40-1 OK
libcilkrts5 7.4.0-1 OK
libclang3.8 3.8.1-1 OK
libclang3.9 3.9.1-1 OK
libclang4.0 4.0.1-1 OK
libclang5.0 5.0.1-2 OK
libclang8 8.0.1-1 OK
libcom_err-devel 1.44.5-1 OK
libcom_err2 1.44.5-1 OK
libcord1 8.0.4-1 OK
libcroco0.6_3 0.6.12-1 OK
libcrypt-devel 4.4.4-1 OK
libcrypt0 2.1-1 OK
libcrypt2 4.4.4-1 OK
libcurl4 7.66.0-1 OK
libdatrie1 0.2.8-1 OK
libdb-devel 5.3.28-2 OK
libdb5.3 5.3.28-2 OK
libdbus-glib_1_2 0.108-1 OK
libdbus1-devel 1.10.22-1 OK
libdbus1_3 1.10.22-1 OK
libdbusmenu-qt2 0.9.3-0.2.20150604bzr OK
libdbusmenu-qt5_2 0.9.3-0.2.20150604bzr OK
libdialog13 1.3-2.20160828 OK
libdialog14 1.3-3.20170131 OK
libdmtx0 0.7.4-1 OK
libdotconf0 1.3-1 OK
libedit0 20130712-1 OK
libEGL-devel 19.1.6-1 OK
libEGL1 19.1.6-1 OK
libEMF1 1.0.9-1 OK
libenchant1 1.6.1-1 OK
libepoxy-devel 1.4.3-1 OK
libepoxy0 1.4.3-1 OK
libespeak1 1.47.11-1 OK
libevent2.0_5 2.0.22-1 OK
libexif-common 0.6.21-3 OK
libexif12 0.6.21-3 OK
libexiv2_14 0.25-2 OK
libexpat-devel 2.2.6-1 OK
libexpat1 2.2.6-1 OK
libfam0 0.1.10-15 OK
libfdisk1 2.33.1-1 OK
libffi6 3.2.1-2 OK
libfftw3_3 3.3.8-1 OK
libFLAC8 1.3.2-1 OK
libflite1 1.4-1 OK
libfltk1.3 1.3.4-1 OK
libfontconfig-common 2.13.1-1 OK
libfontconfig-devel 2.13.1-1 OK
libfontconfig1 2.13.1-1 OK
libfontenc-devel 1.1.4-1 OK
libfontenc1 1.1.4-1 OK
libfpx1 1.3.1.4-1 OK
libfreetype-devel 2.9.1-1 OK
libfreetype6 2.9.1-1 OK
libfribidi0 0.19.7-1 OK
libgailutil18 2.24.32-1 OK
libgc1 8.0.4-1 OK
libgc2 7.6.2-3 OK
libgcc1 7.4.0-1 OK
libgccpp1 8.0.4-1 OK
libgck1_0 3.20.0-1 OK
libgconf2_4 3.2.6-2 OK
libgcr-base3_1 3.20.0-1 OK
libgcr-ui3-common 3.20.0-1 OK
libgcr-ui3_1 3.20.0-1 OK
libgcrypt20 1.8.2-1 OK
libgd3 2.2.5-2 OK
libgdal20 2.4.0-1 OK
libgdal26 3.0.2-1 OK
libgdbm-devel 1.18.1-1 OK
libgdbm4 1.13-1 OK
libgdbm6 1.18.1-1 OK
libgdbm_compat4 1.18.1-1 OK
libgdk_pixbuf2.0-devel 2.36.11-1 OK
libgdk_pixbuf2.0_0 2.36.11-1 OK
libgee0.8_2 0.20.1-1 OK
libgeoclue0 0.12.99-2 OK
libgeos_3_5 3.5.0-1 OK
libgeos_3_5_1 3.5.1-1 OK
libgeos_3_7_0 3.7.0-1 OK
libgeos_3_7_1 3.7.1-1 OK
libgeos_c1 3.7.1-1 OK
libgeotiff2 1.4.3-1 OK
libgfortran3 6.4.0-5 OK
libgfortran4 7.4.0-1 OK
libggi2 2.2.2-4 OK
libggiwmh0 0.3.2-4 OK
libgif4 4.1.6-12 OK
libgif7 5.1.4-1 OK
libgii1 1.0.2-4 OK
libgirepository1.0_1 1.54.1-1 OK
libGL-devel 19.1.6-1 OK
libGL1 19.1.6-1 OK
libglade2.0_0 2.6.4-2 OK
libglapi0 19.1.6-1 OK
libglib2.0-devel 2.54.3-1 OK
libglib2.0_0 2.54.3-1 OK
libGLU1 9.0.0-1 OK
libglut3 3.2.1-1 OK
libgmp10 6.1.2-1 OK
libgnat6 6.4.0-5 OK
libgnat7 7.4.0-1 OK
libgnome-desktop3-common 3.26.2-1 OK
libgnome-desktop3_12 3.26.2-1 OK
libgnome-keyring-devel 3.12.0-2 OK
libgnome-keyring0 3.12.0-2 OK
libgnome-menu3_0 3.13.3-3 OK
libgnome2_0 2.32.1-3 OK
libgnomecanvas2_0 2.30.3-2 OK
libgnomeui2_0 2.24.5-2 OK
libgnomevfs2_0 2.24.4-6 OK
libgnutls28 3.3.27-1 OK
libgnutls30 3.6.9-1 OK
libgomp1 7.4.0-1 OK
libgpg-error0 1.28-1 OK
libgpgme11 1.9.0-1 OK
libgpgmepp6 1.9.0-1 OK
libGraphicsMagick3 1.3.34-1 OK
libgraphite2-devel 1.3.10-1 OK
libgraphite2_3 1.3.10-1 OK
libgs9 9.27-1 OK
libgsf-common 1.14.42-1 OK
libgsf1_114 1.14.42-1 OK
libgsm1 1.0.17-1 OK
libgssapi_krb5_2 1.15.2-2 OK
libgssrpc4 1.15.2-2 OK
libgstbad1.0_0 1.12.5-1 OK
libgstinterfaces0.10_0 0.10.36-3 OK
libgstinterfaces1.0_0 1.12.5-1 OK
libgstreamer0.10_0 0.10.36-2 OK
libgstreamer1.0_0 1.12.5-1 OK
libgtk2.0-devel 2.24.32-1 OK
libgtk2.0_0 2.24.32-1 OK
libgtk3-devel 3.22.28-1 OK
libgtk3_0 3.22.28-1 OK
libgtksourceview2.0_0 2.10.5-2 OK
libgtkspell0 2.0.16-1 OK
libgts0.7_5 20121130-1 OK
libguile17 1.8.8-3 OK
libguile2.0_22 2.0.14-3 OK
libgvc6 2.40.1-4 OK
libharfbuzz-devel 2.5.3-1 OK
libharfbuzz-gobject0 2.5.3-1 OK
libharfbuzz-icu0 2.5.3-1 OK
libharfbuzz0 2.5.3-1 OK
libhdf5_10 1.8.20-1 OK
libhdf5_101 1.10.2-1 OK
libhdf5_103 1.10.5-1 OK
libhdf5hl_10 1.8.20-1 OK
libhdf5hl_100 1.10.5-1 OK
libhogweed2 2.7.1-1 OK
libhogweed4 3.4.1-1 OK
libhunspell1.3_0 1.3.3-1 OK
libhunspell1.4_0 1.4.1-1 OK
libhunspell1.6_0 1.6.1-1 OK
libical1 1.0.1-1 OK
libICE6 1.0.10-1 OK
libiconv 1.14-3 OK
libiconv-devel 1.14-3 OK
libiconv2 1.14-3 OK
libicu56 56.1-1 OK
libicu57 57.1-1 OK
libicu58 58.2-1 OK
libicu59 59.1-1 OK
libicu60 60.2-1 OK
libicu61 61.1-1 OK
libicu62 62.1-1 OK
libicu63 63.1-1 OK
libicu64 64.2-1 OK
libIDL2_0 0.8.14-2 OK
libidn11 1.33-1 OK
libidn2_0 2.2.0-1 OK
libilmbase12 2.2.0-1 OK
libIlmImf22 2.2.0-1 OK
libimagequant0 2.10.0-1 OK
libinchi0 2.3.2-6 OK
libintl-devel 0.19.8.1-2 OK
libintl8 0.19.8.1-2 OK
libiodbc-devel 3.52.8-2 OK
libiodbc2 3.52.8-2 OK
libisl13 0.14.1-1 OK
libisl15 0.16.1-1 OK
libjasper1 1.900.22-1 OK
libjasper4 2.0.14-1 OK
libjavascriptcoregtk1.0_0 2.0.4-5 OK
libjbig2 2.0-14 OK
libjpeg-devel 1.5.3-1 OK
libjpeg8 1.5.3-1 OK
libjson-c-common 0.12-1 OK
libjson-c2 0.12-1 OK
libjson-glib1.0_0 1.4.2-1 OK
libjsoncpp19 1.8.4-1 OK
libk5crypto3 1.15.2-2 OK
libkadm5clnt_mit10 1.14.4-1 OK
libkadm5clnt_mit11 1.15.2-2 OK
libkadm5srv_mit10 1.14.4-1 OK
libkadm5srv_mit11 1.15.2-2 OK
libkdb5_8 1.15.2-2 OK
libkdecore-common 4.14.38-3 OK
libkdecore5 4.14.38-3 OK
libkdegames-common 14.12.3-2 OK
libkdegames6 14.12.3-2 OK
libKF5Archive5 5.43.0-1 OK
libKF5Attica5 5.43.0-1 OK
libKF5Auth5 5.43.0-1 OK
libKF5Bookmarks5 5.43.0-1 OK
libKF5Codecs5 5.43.0-1 OK
libKF5Completion5 5.43.0-1 OK
libKF5Config5 5.43.0-1 OK
libKF5ConfigWidgets5 5.43.0-1 OK
libKF5CoreAddons5 5.43.0-1 OK
libKF5Crash5 5.43.0-1 OK
libKF5DBusAddons5 5.43.0-1 OK
libKF5Declarative5 5.43.0-1 OK
libKF5DNSSD5 5.43.0-1 OK
libKF5GlobalAccel5 5.43.0-1 OK
libKF5Gpgmepp5 16.08.3-2 OK
libKF5GuiAddons5 5.43.0-1 OK
libKF5I18n5 5.43.0-1 OK
libKF5IconThemes5 5.43.0-1 OK
libKF5ItemViews5 5.43.0-1 OK
libKF5JobWidgets5 5.43.0-1 OK
libKF5KDEGames-common 17.12.3-1 OK
libKF5KDEGames7 17.12.3-1 OK
libKF5KIO5 5.43.0-1 OK
libKF5NewStuff5 5.43.0-1 OK
libKF5Notifications5 5.43.0-1 OK
libKF5Package5 5.43.0-1 OK
libKF5Service5 5.43.0-1 OK
libKF5Solid5 5.43.0-1 OK
libKF5Sonnet5 5.43.0-1 OK
libKF5TextWidgets5 5.43.0-1 OK
libKF5Wallet5 5.43.0-1 OK
libKF5WidgetsAddons5 5.43.0-1 OK
libKF5WindowSystem5 5.43.0-1 OK
libKF5XmlGui5 5.43.0-1 OK
libkpathsea6 20190509-1 OK
libkpim-common 4.14.10-3 OK
libkpim4 4.14.10-3 OK
libkrad0 1.15.2-2 OK
libkrb5-devel 1.15.2-2 OK
libkrb5_3 1.15.2-2 OK
libkrb5support0 1.15.2-2 OK
liblapack0 3.8.0-1 OK
libLASi1 1.1.1-2 OK
liblcms2_2 2.9-1 OK
libllvm3.8 3.8.1-1 OK
libllvm3.9 3.9.1-1 OK
libllvm4.0 4.0.1-1 OK
libllvm5.0 5.0.1-1 OK
libllvm8 8.0.1-1 OK
liblrzip-devel 0.631-1 OK
liblrzip0 0.631-1 OK
libltdl7 2.4.6-7 OK
liblz4-devel 1.7.5-1 OK
liblz4_1 1.7.5-1 OK
liblzma5 5.2.4-1 OK
liblzo2-devel 2.10-1 OK
liblzo2_2 2.10-1 OK
libm17n0 1.7.0-1 OK
libMagickC++6_6 6.9.5.7-2 OK
libMagickC++6_8 6.9.10.11-1 OK
libMagickCore6_2 6.9.5.7-2 OK
libMagickCore6_5 6.9.9.11-3 OK
libMagickCore6_6 6.9.10.11-1 OK
libMagickWand6_2 6.9.5.7-2 OK
libMagickWand6_5 6.9.9.11-3 OK
libMagickWand6_6 6.9.10.11-1 OK
libmailutils-devel 3.5-1 OK
libmailutils-sieve-extensions 3.5-1 OK
libmailutils5 3.5-1 OK
libmarisa0 0.2.4-4 OK
libmcpp0 2.7.2-2 OK
libming1 0.4.8-3 OK
libminizip-devel 1.2.11-1 OK
libminizip1 1.2.11-1 OK
libmng2 2.0.3-1 OK
libmpc3 1.1.0-1 OK
libmpfr4 3.1.6-1p1 OK
libmpfr6 4.0.2-1 OK
libmspack0 0.8-1 OK
libmysqlclient18 10.1.30-1 OK
libncursesw10 6.1-1.20190727 OK
libneon27 0.30.1-1 OK
libnetcdf-devel 4.7.3-1 OK
libnetcdf-fortran-devel 4.5.2-1 OK
libnetcdf-fortran_6 4.4.4-3 OK
libnetcdf-fortran_7 4.5.2-1 OK
libnetcdf11 4.4.1.1-1 OK
libnetcdf13 4.6.1-2 OK
libnetcdf15 4.7.3-1 OK
libnettle4 2.7.1-1 OK
libnettle6 3.4.1-1 OK
libnghttp2_14 1.37.0-1 OK
libnotify4 0.7.7-1 OK
libnsl2 1.2.0-1 OK
libnspr4 4.21-1 OK
libnss3 3.45-1 OK
libobjc4 7.4.0-1 OK
libogg0 1.3.1-1 OK
libopenal1 1.18.2-1 OK
libopenbabel4 2.3.2-6 OK
libopenjp2_7 2.3.0-1 OK
libopenjpeg1 1.5.2-3 OK
libopenldap2_4_2 2.4.48-1 OK
libORBit2_0 2.14.19-2 OK
liborc0.4_0 0.4.28-1 OK
libotf0 0.9.13-1 OK
libp11-kit0 0.23.15-1 OK
libpagemaker-tools 0.0.3-2 OK
libpagemaker0.0-debuginfo 0.0.3-2 OK
libpagemaker0.0-devel 0.0.3-2 OK
libpagemaker0.0-doc 0.0.3-2 OK
libpagemaker0.0_0 0.0.3-2 OK
libpango1.0-devel 1.40.14-1 OK
libpango1.0_0 1.40.14-1 OK
libpaper-common 1.1.24-2 OK
libpaper1 1.1.24-2 OK
libpathplan4 2.40.1-4 OK
libpcre-devel 8.43-1 OK
libpcre1 8.43-1 OK
libpcre16_0 8.43-1 OK
libpcre2-posix2 10.33-1 OK
libpcre2_16_0 10.33-1 OK
libpcre2_32_0 10.33-1 OK
libpcre2_8_0 10.33-1 OK
libpcre32_0 8.43-1 OK
libpcrecpp0 8.43-1 OK
libpcreposix0 8.43-1 OK
libphonon4 4.9.1-2 OK
libphonon4qt5_4 4.9.1-2 OK
libpipeline1 1.5.1-1 OK
libpixman1-devel 0.38.4-1 OK
libpixman1_0 0.38.4-1 OK
libpkgconf3 1.6.0-1 OK
libplotter2 2.6-5 OK
libpng-devel 1.6.37-1 OK
libpng16 1.6.37-1 OK
libpng16-devel 1.6.37-1 OK
libpolly8 8.0.1-1 OK
libpoppler-cpp0 0.62.0-1 OK
libpoppler-glib8 0.62.0-1 OK
libpoppler62 0.45.0-2 OK
libpoppler66 0.52.0-2 OK
libpoppler68 0.57.0-1 OK
libpoppler73 0.62.0-1 OK
libpopt-common 1.16-2 OK
libpopt0 1.16-2 OK
libportaudio2 19.20140130-3 OK
libpotrace0 1.15-1 OK
libpq5 12.1-1 OK
libprison0 1.1.0-1 OK
libprocps-devel 3.3.15-1 OK
libprocps-ng4 3.3.10-1 OK
libprocps-ng5 3.3.11-1 OK
libprocps-ng6 3.3.12-2 OK
libprocps7 3.3.15-1 OK
libproj12 4.9.3-2 Incomplete
libproj13 5.2.0-1 OK
libproj15 6.3.0-1 OK
libproj9 4.9.2-1 OK
libproxy1 0.4.14-2 OK
libpsl5 0.21.0-1 OK
libpstoedit0 3.73-1 OK
libptexenc1 20190509-1 OK
libpulse-simple0 11.1-1 OK
libpulse0 11.1-1 OK
libqca2 2.1.3-1 OK
libqhull_7 2019.1-1 OK
libqimageblitz4 0.0.6-1 OK
libqjson0 0.8.1-1 OK
libqpdf21 8.4.1-1 OK
libqpdf26 9.1.0-1 OK
libqqwing2 1.3.4-1 OK
libqrencode3 3.4.4-1 OK
libqscintilla2-common 2.10.2-1 OK
libqscintilla2-qt5-common 2.10.2-1 OK
libqscintilla2_12 2.9.3-2 OK
libqscintilla2_qt4-common 2.10.2-1 OK
libqscintilla2_qt4_13 2.10.2-1 OK
libqscintilla2_qt5-common 2.10.2-1 OK
libqscintilla2_qt5_13 2.10.2-1 OK
libQt3Support4 4.8.7-4 OK
libQt53D5 5.9.4-1 OK
libQt5Charts5 5.9.4-1 OK
libQt5Core-devel 5.9.4-2 OK
libQt5Core5 5.9.4-2 OK
libQt5DataVisualization5 5.9.4-1 OK
libQt5Designer5 5.9.4-1 OK
libQt5Gui-devel 5.9.4-2 OK
libQt5Gui5 5.9.4-2 OK
libQt5Help-devel 5.9.4-1 OK
libQt5Help5 5.9.4-1 OK
libQt5Location5 5.9.4-2 OK
libQt5Multimedia5 5.9.4-1 OK
libQt5Positioning5 5.9.4-2 OK
libQt5Quick5 5.9.4-1 OK
libQt5Script5 5.9.4-1 OK
libQt5SerialPort5 5.9.4-1 OK
libQt5Sql-devel 5.9.4-2 OK
libQt5Sql5 5.9.4-2 OK
libQt5Svg5 5.9.4-1 OK
libQt5TextToSpeech5 5.9.4-1 OK
libQt5UiTools-devel 5.9.4-1 OK
libQt5UiTools5 5.9.4-1 OK
libQt5WebChannel5 5.9.4-1 OK
libQt5WebKit5 5.9.3-0.3.20180115git OK
libQt5WebSockets5 5.9.4-1 OK
libQt5X11Extras-devel 5.9.4-1 OK
libQt5X11Extras5 5.9.4-1 OK
libQt5XmlPatterns5 5.9.4-1 OK
libQtCore4 4.8.7-4 OK
libQtCore4-devel 4.8.7-4 OK
libQtDBus4 4.8.7-4 OK
libQtDeclarative4 4.8.7-4 OK
libQtDesigner4 4.8.7-4 OK
libQtGui4 4.8.7-4 OK
libQtHelp4 4.8.7-4 OK
libQtMultimedia4 4.8.7-4 OK
libQtNetwork4 4.8.7-4 OK
libQtOpenGL4 4.8.7-4 OK
libQtScript4 4.8.7-4 OK
libQtScriptTools4 4.8.7-4 OK
libQtSql4 4.8.7-4 OK
libQtSvg4 4.8.7-4 OK
libQtTest4 4.8.7-4 OK
libQtWebKit4 4.10.4-3 OK
libQtXml4 4.8.7-4 OK
libQtXmlPatterns4 4.8.7-4 OK
libquadmath0 7.4.0-1 OK
libquazip-devel 0.6.2-1 OK
libquazip-doc 0.6.2-1 OK
libquazip1 0.6.2-1 OK
libqwt5 5.2.3-1 OK
libqzeitgeist1 0.8.0-2 OK
libreadline7 7.0.3-3 OK
librest0.7_0 0.8.1-1 OK
librevenge0.0-devel 0.0.4-2 OK
librevenge0.0_0 0.0.4-2 OK
librhash0 1.3.9-1 OK
librsvg2_2 2.40.20-1 OK
libsasl2-devel 2.1.27-1 OK
libsasl2_3 2.1.27-1 OK
libsecret1-devel 0.18.5-1 OK
libsecret1_0 0.18.5-1 OK
libserf1-devel 1.3.9-1 OK
libserf1_0 1.3.9-1 OK
libsigsegv2 2.10-2 OK
libslang2 2.3.2-2 OK
libSM6 1.2.3-1 OK
libsmartcols1 2.33.1-1 OK
libsmokebase3 4.14.3-1 OK
libsmokekde3 4.14.3-1 OK
libsmokeqt3 4.14.3-2 OK
libsndfile1 1.0.28-2 OK
libsoup-gnome2.4_1 2.60.3-1 OK
libsoup2.4_1 2.60.3-1 OK
libspeechd2 0.8.7-1 OK
libsqlite3-devel 3.30.0-1 OK
libsqlite3_0 3.30.0-1 OK
libssh-common 0.8.7-1 OK
libssh2_1 1.7.0-1 OK
libssh4 0.8.7-1 OK
libssl-devel 1.1.1d-1 OK
libssl1.0 1.0.2t-1 OK
libssl1.1 1.1.1d-1 OK
libssp0 6.4.0-4 OK
libstartup-notification1_0 0.12-2 OK
libstdc++6 7.4.0-1 OK
libstreamanalyzer0 0.7.8-5 OK
libstreams0 0.7.8-5 OK
libsybdb5 1.00.37-1 OK
libsynctex1 20180918-1 OK
libsynctex2 20190509-1 OK
libtasn1_6 4.14-1 OK
libtdb1 1.3.18-1 OK
libteckit0 2.5.9-1 OK
libtexlua52_5 20180918-1 OK
libtexlua53_5 20190509-1 OK
libtexluajit2 20190509-1 OK
libthai0 0.1.26-1 OK
libtiff6 4.0.9-1 OK
libtirpc-common 1.1.4-1 OK
libtirpc3 1.1.4-1 OK
libtxc_dxtn 1.0.1-2 OK
libunique1.0_0 1.1.6-1 OK
libunistring2 0.9.10-1 OK
libunwind-devel 8.0.1-1 OK
libunwind1 8.0.1-1 OK
libusb0 1.2.6.0-2 OK
libuuid-devel 2.33.1-1 OK
libuuid1 2.33.1-1 OK
libuv1 1.32.0-1 OK
libverto1 0.2.6-1 OK
libvncserver0 0.9.10-2 OK
libvncserver1 0.9.11-1 OK
libvoikko1 3.8-1 OK
libvorbis 1.3.6-1 OK
libvorbis0 1.3.6-1 OK
libvorbisenc2 1.3.6-1 OK
libvorbisfile3 1.3.6-1 OK
libvte9 0.28.2-6 OK
libvtv0 5.4.0-1 OK
libwebkitgtk1.0_0 2.0.4-5 OK
libwebp5 0.4.4-1 OK
libwebp7 0.6.1-2 OK
libwebpdemux2 0.6.1-2 OK
libwebpmux1 0.4.4-1 OK
libwebpmux3 0.6.1-2 OK
libWINGs3 0.95.8-2 OK
libWMaker-devel 0.95.8-2 OK
libWMaker1 0.95.8-2 OK
libwmf027 0.2.8.4-15 OK
libwnck1_22 2.30.7-2 OK
libwrap0 7.6-26 OK
libwraster5 0.95.6-3 OK
libwraster6 0.95.8-2 OK
libwsman-common 2.6.5-1 OK
libwsman1 2.6.5-1 OK
libwsman_client4 2.6.5-1 OK
libwv1.2_4 1.2.9-2 OK
libwx_baseu2.8_0 2.8.12.1-7 OK
libwx_gtk2u2.8-devel 2.8.12.1-7 OK
libwx_gtk2u2.8_0 2.8.12.1-7 OK
libX11-debuginfo 1.6.8-1 OK
libX11-devel 1.6.8-1 OK
libX11-doc 1.6.8-1 OK
libX11-xcb-devel 1.6.8-1 OK
libX11-xcb1 1.6.8-1 OK
libX11_6 1.6.8-1 OK
libXau-devel 1.0.9-1 OK
libXau6 1.0.9-1 OK
libXaw3d8 1.6.3-1 OK
libXaw7 1.0.13-1 OK
libxcb-composite0 1.13-1 OK
libxcb-devel 1.13-1 OK
libxcb-dri2_0 1.13-1 OK
libxcb-ewmh2 0.4.1-1 OK
libxcb-glx-devel 1.13-1 OK
libxcb-glx0 1.13-1 OK
libxcb-icccm4 0.4.1-1 OK
libxcb-image0 0.3.9-1 OK
libxcb-keysyms1 0.3.9-1 OK
libxcb-randr0 1.13-1 OK
libxcb-render-devel 1.13-1 OK
libxcb-render-util0 0.3.9-1 OK
libxcb-render0 1.13-1 OK
libxcb-res0 1.13-1 OK
libxcb-shape0 1.13-1 OK
libxcb-shm-devel 1.13-1 OK
libxcb-shm0 1.13-1 OK
libxcb-sync1 1.13-1 OK
libxcb-util1 0.3.9-1 OK
libxcb-xfixes0 1.13-1 OK
libxcb-xinerama0 1.13-1 OK
libxcb-xkb1 1.13-1 OK
libxcb1 1.13-1 OK
libXcomposite-devel 0.4.5-1 OK
libXcomposite1 0.4.5-1 OK
libXcursor-devel 1.2.0-1 OK
libXcursor1 1.2.0-1 OK
libXdamage-devel 1.1.5-1 OK
libXdamage1 1.1.5-1 OK
libXdmcp-devel 1.1.3-1 OK
libXdmcp6 1.1.3-1 OK
libXext-devel 1.3.4-1 OK
libXext6 1.3.4-1 OK
libxfce4util-common 4.12.1-1 OK
libxfce4util6 4.10.1-1 OK
libxfce4util7 4.12.1-1 OK
libxfconf0_2 4.12.0-2 OK
libXfixes-devel 5.0.3-1 OK
libXfixes3 5.0.3-1 OK
libXfont-debuginfo 1.5.4-1 OK
libXfont-devel 1.5.4-1 OK
libXfont1 1.5.4-1 OK
libXfont2_2 2.0.4-1 OK
libXft-devel 2.3.3-1 OK
libXft2 2.3.3-1 OK
libXi-devel 1.7.10-1 OK
libXi6 1.7.10-1 OK
libXinerama-devel 1.1.4-1 OK
libXinerama1 1.1.4-1 OK
libxkbcommon0 0.8.0-1 OK
libxkbfile1 1.1.0-1 OK
libxml2 2.9.9-2 OK
libXmu6 1.1.3-1 OK
libXmuu1 1.1.3-1 OK
libXpm4 3.5.12-1 OK
libXrandr-devel 1.5.2-1 OK
libXrandr2 1.5.2-1 OK
libXrender-devel 0.9.9-1 OK
libXrender1 0.9.9-1 OK
libXRes1 1.2.0-1 OK
libxslt 1.1.29-1 OK
libXss1 1.2.3-1 OK
libXt6 1.2.0-1 OK
libXtst6 1.2.3-1 OK
libyaml0_2 0.1.6-2 OK
libzbar0 0.10-9 OK
libzinnia0 0.06-10 OK
libzip-debuginfo 1.5.1-1 OK
libzip-devel 1.5.1-1 OK
libzip-doc 1.5.1-1 OK
libzip-tools 1.5.1-1 OK
libzip2 0.11.2-2 OK
libzip5 1.5.1-1 OK
libzzip-devel 0.13.68-1 OK
libzzip0.13 0.13.68-1 OK
login 1.13-1 OK
lrzip 0.631-1 OK
lrzip-debuginfo 0.631-1 OK
lua 5.3.5-1 OK
luit 20130217-1 OK
lxterminal 0.3.1-1 OK
lxterminal-debuginfo 0.3.1-1 OK
lzip 1.19-1 OK
lziprecover 1.19-1 OK
m17n-db 1.7.0-2 OK
m4 1.4.18-1 OK
mailutils 3.5-1 OK
mailutils-comsatd 3.5-1 OK
mailutils-debuginfo 3.5-1 OK
mailutils-imap4d 3.5-1 OK
mailutils-mh 3.5-1 OK
mailutils-pop3d 3.5-1 OK
make 4.2.1-2 OK
make-debuginfo 4.2.1-2 OK
makedepend 1.0.6-1 OK
makedepend-debuginfo 1.0.6-1 OK
makepasswd 1.10-2 OK
man-db 2.7.6.1-1 OK
man-pages-posix 2013-a-1 OK
mariadb-common 3.0.9-1 OK
mcpp 2.7.2-2 OK
mingw64-i686-binutils 2.29.1.787c9873-1 OK
mingw64-i686-bzip2 1.0.6-4 OK
mingw64-i686-dbus 1.10.22-1 OK
mingw64-i686-expat 2.2.2-1 OK
mingw64-i686-freetds 1.00.37-1 OK
mingw64-i686-freetype2 2.8.1-1 OK
mingw64-i686-gcc-core 7.4.0-1 OK
mingw64-i686-gcc-debuginfo 7.4.0-1 OK
mingw64-i686-gcc-fortran 7.4.0-1 OK
mingw64-i686-gcc-g++ 7.4.0-1 OK
mingw64-i686-gcc-objc 7.4.0-1 OK
mingw64-i686-gdbm 1.12-1 OK
mingw64-i686-gettext 0.19.8.1-2 OK
mingw64-i686-glib2.0 2.54.3-1 OK
mingw64-i686-gmp 6.1.2-1 OK
mingw64-i686-gnutls 3.5.18-1 OK
mingw64-i686-harfbuzz 1.7.6-1 OK
mingw64-i686-headers 7.0.0-1 OK
mingw64-i686-libffi 3.2.1-1 OK
mingw64-i686-libidn2 2.0.4-1 OK
mingw64-i686-libjpeg-turbo 1.5.3-1 OK
mingw64-i686-libpagemaker0.0 0.0.3-1 OK
mingw64-i686-libpng 1.6.34-1 OK
mingw64-i686-librevenge0.0 0.0.4-2 OK
mingw64-i686-libtasn1 4.13-1 OK
mingw64-i686-libunistring 0.9.6-1 OK
mingw64-i686-libzip 1.5.1-1 OK
mingw64-i686-mariadb-connector-c 2.3.3-1 OK
mingw64-i686-minizip 1.2.11-1 OK
mingw64-i686-nettle 3.4-1 OK
mingw64-i686-openssl 1.0.2o-1 OK
mingw64-i686-p11-kit 0.23.10-1 OK
mingw64-i686-pcre 8.40-3 OK
mingw64-i686-pcre2 10.23-2 OK
mingw64-i686-postgresql 9.5.4-1 OK
mingw64-i686-qt4-qmake 4.8.7-1 OK
mingw64-i686-qt4-qmake-debuginfo 4.8.7-1 OK
mingw64-i686-qt5-base 5.9.4-1 OK
mingw64-i686-qt5-tools 5.9.4-1 OK
mingw64-i686-runtime 7.0.0-1 OK
mingw64-i686-sqlite3 3.19.3-1 OK
mingw64-i686-win-iconv 0.0.6-2 OK
mingw64-i686-windows-default-manifest 6.4-1 OK
mingw64-i686-winpthreads 7.0.0-1 OK
mingw64-i686-zlib 1.2.11-1 OK
mingw64-i686-zziplib 0.13.62-1 OK
mingw64-x86_64-binutils 2.29.1.787c9873-1 OK
mingw64-x86_64-bzip2 1.0.6-4 OK
mingw64-x86_64-gcc-core 7.4.0-1 OK
mingw64-x86_64-gcc-debuginfo 7.4.0-1 OK
mingw64-x86_64-gcc-fortran 7.4.0-1 OK
mingw64-x86_64-gcc-g++ 7.4.0-1 OK
mingw64-x86_64-gcc-objc 7.4.0-1 OK
mingw64-x86_64-gdbm 1.12-1 OK
mingw64-x86_64-gettext 0.19.8.1-2 OK
mingw64-x86_64-headers 7.0.0-1 OK
mingw64-x86_64-libpagemaker0.0 0.0.3-1 OK
mingw64-x86_64-librevenge0.0 0.0.4-2 OK
mingw64-x86_64-libzip 1.5.1-1 OK
mingw64-x86_64-minizip 1.2.11-1 OK
mingw64-x86_64-openssl 1.0.2o-1 OK
mingw64-x86_64-qt4-qmake 4.8.7-1 OK
mingw64-x86_64-qt4-qmake-debuginfo 4.8.7-1 OK
mingw64-x86_64-runtime 7.0.0-1 OK
mingw64-x86_64-win-iconv 0.0.6-2 OK
mingw64-x86_64-windows-default-manifest 6.4-1 OK
mingw64-x86_64-winpthreads 7.0.0-1 OK
mingw64-x86_64-zlib 1.2.11-1 OK
mingw64-x86_64-zziplib 0.13.62-1 OK
minizip 1.2.8-1 OK
mintty 3.1.0-1 OK
mutt 1.13.2-1 OK
mutt-debuginfo 1.13.2-1 OK
mutter 3.22.3-1 OK
mutter-debuginfo 3.22.3-1 OK
mutter-devel 3.22.3-1 OK
mutter-doc 3.14.4-1 OK
mysql-common 10.3.14-1 OK
ncurses 6.1-1.20190727 OK
neomutt 20191207-1 OK
neomutt-debuginfo 20191207-1 OK
net-snmp-agent-libs 5.7.3-1 OK
net-snmp-libs 5.7.3-1 OK
netcdf-fortran 4.4.4-1 OK
netcdf-fortran-debuginfo 4.5.2-1 OK
nginx 1.14.2-1 OK
nginx-mod_http_perl 1.14.2-1 OK
nmh 1.7.1-1 OK
openldap-devel 2.4.48-1 OK
openssh 8.1p1-1 OK
openssl 1.1.1d-1 OK
openssl-perl 1.1.1d-1 OK
oxygen-icons 15.04.3-1 OK
p11-kit 0.23.15-1 OK
p11-kit-trust 0.23.15-1 OK
p7zip 15.14.1-1 OK
patch 2.7.4-1 OK
patch-debuginfo 2.7.4-1 OK
patcher 0.0.20040521-1 OK
patchutils 0.3.4-1 OK
patchutils-debuginfo 0.3.4-1 OK
pbzip2 1.1.13-1 OK
pcre 8.43-1 OK
pcre2 10.33-1 OK
pdfgrep 1.4.1-1 OK
perl 5.26.3-2 OK
perl-Algorithm-Diff 1.1903-3 OK
perl-Alien-wxWidgets 0.69-1 OK
perl-Archive-Extract 0.80-2 OK
perl-Archive-Zip 1.67-1 OK
perl-Authen-SASL 2.16-3 OK
perl-Authen-SASL-XS 1.00-2 OK
perl-Authen-SASL-XS-debuginfo 1.00-2 OK
perl-autovivification 0.18-1 OK
perl-autovivification-debuginfo 0.18-1 OK
perl-B-Generate 1.56-1 OK
perl-B-Generate-debuginfo 1.56-1 OK
perl-B-Hooks-EndOfScope 0.24-1 OK
perl-Barcode-ZBar 0.10-9 OK
perl-Business-ISBN 3.004-2 OK
perl-Business-ISBN-Data 20140910.003-2 OK
perl-Business-ISMN 1.201-1 OK
perl-Business-ISSN 1.003-1 OK
perl-Cairo 1.106-2 OK
perl-Cairo-debuginfo 1.106-2 OK
perl-Cairo-GObject 1.004-3 OK
perl-Cairo-GObject-debuginfo 1.004-3 OK
perl-Canary-Stability 2013-1 OK
perl-Capture-Tiny 0.48-1 OK
perl-Carp 1.38-2 OK
perl-CGI 4.44-1 OK
perl-Chemistry-OpenBabel 2.3.2-6 OK
perl-Class-Accessor 0.51-1 OK
perl-Class-Data-Inheritable 0.08-2 OK
perl-Class-Inspector 1.36-1 OK
perl-Class-Singleton 1.5-2 OK
perl-Class-XSAccessor 1.19-4 OK
perl-Class-XSAccessor-debuginfo 1.19-4 OK
perl-Clone 0.41-1 OK
perl-Clone-debuginfo 0.41-1 OK
perl-common-sense 3.74-2 OK
perl-Compress-Bzip2 2.26-2 OK
perl-Compress-Bzip2-debuginfo 2.26-2 OK
perl-Config-AutoConf 0.317-1 OK
perl-Config-Perl-V 0.27-2 OK
perl-Config-Tiny 2.24-1 OK
perl-CPAN-Changes 0.400002-2 OK
perl-CPAN-DistnameInfo 0.12-6 OK
perl-CPAN-Meta 2.150010-2 OK
perl-CPAN-Meta-Check 0.014-2 OK
perl-CPAN-Meta-Requirements 2.140-2 OK
perl-CPAN-Meta-YAML 0.018-2 OK
perl-CPAN-Reporter 1.2018-2 OK
perl-CPAN-Testers-Report 1.999003-3 OK
perl-Cpanel-JSON-XS 4.17-1 OK
perl-Cpanel-JSON-XS-debuginfo 4.17-1 OK
perl-Crypt-OpenSSL-Bignum 0.09-1 OK
perl-Crypt-OpenSSL-Bignum-debuginfo 0.09-1 OK
perl-Crypt-OpenSSL-DSA 0.19-2 OK
perl-Crypt-OpenSSL-DSA-debuginfo 0.19-2 OK
perl-Crypt-OpenSSL-EC 1.31-2 OK
perl-Crypt-OpenSSL-EC-debuginfo 1.31-2 OK
perl-Crypt-OpenSSL-ECDSA 0.08-3 OK
perl-Crypt-OpenSSL-ECDSA-debuginfo 0.08-3 OK
perl-Crypt-OpenSSL-Random 0.15-1 OK
perl-Crypt-OpenSSL-Random-debuginfo 0.15-1 OK
perl-Crypt-OpenSSL-RSA 0.31-1 OK
perl-Crypt-OpenSSL-RSA-debuginfo 0.31-1 OK
perl-Data-Alias 1.20-2 OK
perl-Data-Alias-debuginfo 1.20-2 OK
perl-Data-Compare 1.27-1 OK
perl-Data-Diver 1.0101-4 OK
perl-Data-Dump 1.23-2 OK
perl-Data-GUID 0.049-2 OK
perl-Data-OptList 0.110-2 OK
perl-Data-Uniqid 0.12-2 OK
perl-Data-UUID 1.224-1 OK
perl-Data-UUID-debuginfo 1.224-1 OK
perl-Date-Manip 6.78-1 OK
perl-Date-Simple 3.03-3 OK
perl-Date-Simple-debuginfo 3.03-3 OK
perl-DateTime 1.51-1 OK
perl-DateTime-Calendar-Julian 0.102-1 OK
perl-DateTime-debuginfo 1.51-1 OK
perl-DateTime-Format-Builder 0.82-1 OK
perl-DateTime-Format-Strptime 1.76-1 OK
perl-DateTime-Locale 1.25-1 OK
perl-DateTime-TimeZone 2.37-1 OK
perl-DBD-mysql 4.050-1 OK
perl-DBD-mysql-debuginfo 4.050-1 OK
perl-DBD-SQLite 1.64-1 OK
perl-DBD-SQLite-debuginfo 1.64-1 OK
perl-DBI 1.642-1 OK
perl-DBI-debuginfo 1.642-1 OK
perl-debuginfo 5.26.3-2 OK
perl-Devel-Autoflush 0.06-3 OK
perl-Devel-CheckLib 1.14-1 OK
perl-Devel-GlobalDestruction 0.14-2 OK
perl-Devel-StackTrace 2.04-1 OK
perl-Devel-Symdump 2.18-2 OK
perl-Digest-BubbleBabble 0.02-4 OK
perl-Digest-GOST 0.06-2 OK
perl-Digest-GOST-debuginfo 0.06-2 OK
perl-Digest-HMAC 1.03-6 OK
perl-Digest-SHA 6.02-1 OK
perl-Digest-SHA-debuginfo 6.02-1 OK
perl-Digest-SHA1 2.13-6 OK
perl-Digest-SHA1-debuginfo 2.13-6 OK
perl-Dist-CheckConflicts 0.11-3 OK
perl-Encode-EUCJPASCII 0.03-3 OK
perl-Encode-EUCJPASCII-debuginfo 0.03-3 OK
perl-Encode-HanExtra 0.23-3 OK
perl-Encode-HanExtra-debuginfo 0.23-3 OK
perl-Encode-ISO2022 0.04-4 OK
perl-Encode-ISO2022-debuginfo 0.04-4 OK
perl-Encode-JIS2K 0.03-2 OK
perl-Encode-JIS2K-debuginfo 0.03-2 OK
perl-Encode-JISX0213 0.04-2 OK
perl-Encode-JISX0213-debuginfo 0.04-2 OK
perl-Encode-Locale 1.05-2 OK
perl-Error 0.17028-1 OK
perl-Eval-Closure 0.14-2 OK
perl-Exception-Class 1.44-1 OK
perl-Exporter-Tiny 1.002001-1 OK
perl-ExtUtils-CBuilder 0.280231-1 OK
perl-ExtUtils-Depends 0.8000-1 OK
perl-ExtUtils-F77 1.23-1 OK
perl-ExtUtils-Helpers 0.026-2 OK
perl-ExtUtils-LibBuilder 0.08-2 OK
perl-ExtUtils-MakeMaker 7.38-1 OK
perl-ExtUtils-PkgConfig 1.16-2 OK
perl-File-Copy-Recursive 0.45-1 OK
perl-File-Find-Object 0.3.4-1 OK
perl-File-Find-Object-Rule 0.0311-1 OK
perl-File-Find-Rule 0.34-2 OK
perl-File-HomeDir 1.004-1 OK
perl-File-Listing 6.04-6 OK
perl-File-pushd 1.016-1 OK
perl-File-Remove 1.58-1 OK
perl-File-ShareDir 1.116-1 OK
perl-File-Slurp 9999.28-1 OK
perl-File-Slurp-Tiny 0.004-2 OK
perl-File-Slurper 0.012-1 OK
perl-File-Which 1.23-1 OK
perl-Finance-Quote 1.47-1 OK
perl-Font-AFM 1.20-2 OK
perl-Font-TTF 1.06-2 OK
perl-GD 2.66-1 OK
perl-GD-debuginfo 2.66-1 OK
perl-gdal 3.0.2-1 OK
perl-Getopt-ArgvFile 1.11-3 OK
perl-gettext 1.07-2 OK
perl-gettext-debuginfo 1.07-2 OK
perl-Glib 1.326-1 OK
perl-Glib-debuginfo 1.326-1 OK
perl-Glib-Object-Introspection 0.043-1 OK
perl-Glib-Object-Introspection-debuginfo 0.043-1 OK
perl-Gnome2 1.046-2 OK
perl-Gnome2-Canvas 1.002-13 OK
perl-Gnome2-Canvas-debuginfo 1.002-13 OK
perl-Gnome2-debuginfo 1.046-2 OK
perl-Gnome2-GConf 1.044-13 OK
perl-Gnome2-GConf-debuginfo 1.044-13 OK
perl-Gnome2-Rsvg 0.11-3 OK
perl-Gnome2-Rsvg-debuginfo 0.11-3 OK
perl-Gnome2-VFS 1.083-1 OK
perl-Gnome2-VFS-debuginfo 1.083-1 OK
perl-Gnome2-Vte 0.11-3 OK
perl-Gnome2-Vte-debuginfo 0.11-3 OK
perl-Gnome2-Wnck 0.16-13 OK
perl-Gnome2-Wnck-debuginfo 0.16-13 OK
perl-Graphics-Magick 1.3.34-1 OK
perl-GStreamer 0.20-1 OK
perl-GStreamer-debuginfo 0.20-1 OK
perl-GStreamer-Interfaces 0.06-2 OK
perl-GStreamer-Interfaces-debuginfo 0.06-2 OK
perl-GStreamer1 0.003-2 OK
perl-Gtk2 1.24992-1 OK
perl-Gtk2-debuginfo 1.24992-1 OK
perl-Gtk2-GladeXML 1.007-13 OK
perl-Gtk2-GladeXML-debuginfo 1.007-13 OK
perl-Gtk2-Notify 0.05-13 OK
perl-Gtk2-Notify-debuginfo 0.05-13 OK
perl-Gtk2-SourceView2 0.10-4 OK
perl-Gtk2-SourceView2-debuginfo 0.10-4 OK
perl-Gtk2-Spell 1.04-3 OK
perl-Gtk2-Spell-debuginfo 1.04-3 OK
perl-Gtk2-Unique 0.05-4 OK
perl-Gtk2-Unique-debuginfo 0.05-4 OK
perl-Gtk2-WebKit 0.09-3 OK
perl-Gtk2-WebKit-debuginfo 0.09-3 OK
perl-Gtk3 0.032-1 OK
perl-gv 2.40.1-4 OK
perl-HTML-Element-Extended 1.18-2 OK
perl-HTML-Format 2.16-3 OK
perl-HTML-Formatter 2.16-3 OK
perl-HTML-Parser 3.72-2 OK
perl-HTML-Parser-debuginfo 3.72-2 OK
perl-HTML-TableExtract 2.15-2 OK
perl-HTML-Tagset 3.20-6 OK
perl-HTML-Tree 5.07-1 OK
perl-HTTP-Cookies 6.06-1 OK
perl-HTTP-Daemon 6.06-1 OK
perl-HTTP-Date 6.03-1 OK
perl-HTTP-Message 6.18-1 OK
perl-HTTP-Negotiate 6.01-6 OK
perl-HTTP-Tiny 0.076-1 OK
perl-Image-Magick 6.9.10.11-1 OK
perl-inc-latest 0.500-2 OK
perl-Inline 0.83-1 OK
perl-Inline-Files 0.71-1 OK
perl-IO-CaptureOutput 1.1105-1 OK
perl-IO-HTML 1.001-3 OK
perl-IO-Prompt-Tiny 0.003-3 OK
perl-IO-Socket-INET6 2.72-3 OK
perl-IO-Socket-IP 0.39-2 OK
perl-IO-Socket-SSL 2.066-1 OK
perl-IO-String 1.08-6 OK
perl-IO-stringy 2.111-2 OK
perl-IO-Tty 1.12-3 OK
perl-IO-Tty-debuginfo 1.12-3 OK
perl-IPC-Cmd 1.04-1 OK
perl-IPC-Run 20180523.0-1 OK
perl-IPC-Run3 0.048-3 OK
perl-JSON 4.02-1 OK
perl-JSON-MaybeXS 1.004000-1 OK
perl-JSON-PP 4.04-1 OK
perl-JSON-XS 3.04-2 OK
perl-JSON-XS-debuginfo 3.04-2 OK
perl-KDE4 4.14.3-2 OK
perl-KDE4-debuginfo 4.14.3-2 OK
perl-Lchown 1.01-2 OK
perl-Lchown-debuginfo 1.01-2 OK
perl-libwww-perl 6.41-1 OK
perl-libxml-perl 0.08-6 OK
perl-Lingua-Translit 0.28-1 OK
perl-List-AllUtils 0.15-1 OK
perl-List-MoreUtils 0.428-1 OK
perl-List-MoreUtils-debuginfo 0.426-1 OK
perl-List-MoreUtils-XS 0.428-1 OK
perl-List-SomeUtils 0.58-1 OK
perl-List-SomeUtils-XS 0.58-1 OK
perl-List-UtilsBy 0.11-1 OK
perl-Log-Log4perl 1.49-2 OK
perl-LWP-MediaTypes 6.04-1 OK
perl-LWP-Online 1.08-2 OK
perl-LWP-Protocol-https 6.07-2 OK
perl-Mail-Box 3.008-1 OK
perl-Mail-Box-Parser-C 3.009-1 OK
perl-Mail-Box-Parser-C-debuginfo 3.009-1 OK
perl-Mail-IMAPClient 3.42-1 OK
perl-Mail-Message 3.008-1 OK
perl-Mail-Transport 3.004-1 OK
perl-MailTools 2.21-1 OK
perl-marisa 0.2.4-4 OK
perl-Math-Int64 0.54-2 OK
perl-Math-Int64-debuginfo 0.54-2 OK
perl-Metabase-Client-Simple 0.012-2 OK
perl-Metabase-Fact 0.025-2 OK
perl-MIME-Base32 1.303-2 OK
perl-MIME-Charset 1.012.2-2 OK
perl-MIME-tools 5.508-2 OK
perl-MIME-Types 2.17-1 OK
perl-ming 0.4.8-3 OK
perl-Module-Build 0.4229-1 OK
perl-Module-Implementation 0.09-2 OK
perl-Module-Load-Conditional 0.68-2 OK
perl-Module-Metadata 1.000037-1 OK
perl-Module-Pluggable 5.2-2 OK
perl-Module-Runtime 0.016-1 OK
perl-Module-ScanDeps 1.27-1 OK
perl-Module-Signature 0.83-1 OK
perl-Mojolicious 8.26-1 OK
perl-Mozilla-CA 20180117-1 OK
perl-MRO-Compat 0.13-2 OK
perl-namespace-autoclean 0.29-1 OK
perl-namespace-clean 0.27-2 OK
perl-Net-DNS 1.21-1 OK
perl-Net-DNS-SEC 1.14-1 OK
perl-Net-HTTP 6.19-1 OK
perl-Net-IP 1.26-4 OK
perl-Net-Libproxy 0.4.14-2 OK
perl-Net-SMTP-SSL 1.04-2 OK
perl-net-snmp 5.7.3-1 OK
perl-Net-SSLeay 1.88-1 OK
perl-Net-SSLeay-debuginfo 1.88-1 OK
perl-Net-XMPP 1.05-2 OK
perl-Number-Compare 0.03-6 OK
perl-Object-Realize-Later 0.21-1 OK
perl-OpenGL 0.7000-1 OK
perl-OpenGL-debuginfo 0.7000-1 OK
perl-openwsman 2.6.5-1 OK
perl-Package-Stash 0.38-1 OK
perl-Package-Stash-XS 0.29-1 OK
perl-PadWalker 2.3-1 OK
perl-PadWalker-debuginfo 2.3-1 OK
perl-Pango 1.227-2 OK
perl-Pango-debuginfo 1.227-2 OK
perl-PAR 1.016-1 OK
perl-PAR-Dist 0.49-4 OK
perl-PAR-Packer 1.047-1 OK
perl-Params-Util 1.07-6 OK
perl-Params-Validate 1.29-2 OK
perl-Params-Validate-debuginfo 1.29-2 OK
perl-Params-ValidationCompiler 0.30-1 OK
perl-Parse-RecDescent 1.967015-2 OK
perl-Path-Class 0.37-2 OK
perl-Pod-Coverage 0.23-4 OK
perl-Pod-Escapes 1.07-3 OK
perl-Pod-Simple 3.35-2 OK
perl-POD2-Base 0.043-3 OK
perl-Probe-Perl 0.03-4 OK
perl-Proc-ProcessTable 0.59-1 OK
perl-Proc-ProcessTable-debuginfo 0.59-1 OK
perl-Qt4 4.14.3-2 OK
perl-Qt4-debuginfo 4.14.3-2 OK
perl-Readonly 2.05-2 OK
perl-Readonly-XS 1.05-5 OK
perl-Readonly-XS-debuginfo 1.05-5 OK
perl-Regexp-Common 2017060201-2 OK
perl-Role-Tiny 2.001004-1 OK
perl-Scalar-List-Utils 1.53-1 OK
perl-Scalar-List-Utils-debuginfo 1.53-1 OK
perl-SGMLSpm 1.03ii-5 OK
perl-Socket 2.029-1 OK
perl-Socket-debuginfo 2.029-1 OK
perl-Socket6 0.29-1 OK
perl-Socket6-debuginfo 0.29-1 OK
perl-Sort-Key 1.33-2 OK
perl-Specio 0.44-1 OK
perl-Spiffy 0.46-3 OK
perl-Stow 2.3.1-2 OK
perl-Sub-Exporter 0.987-4 OK
perl-Sub-Exporter-Progressive 0.001013-2 OK
perl-Sub-Identify 0.14-2 OK
perl-Sub-Identify-debuginfo 0.14-2 OK
perl-Sub-Install 0.928-3 OK
perl-Sub-Quote 2.006006-1 OK
perl-Sub-Uplevel 0.2800-2 OK
perl-SUPER 1.20190531-1 OK
perl-Tee 0.14-6 OK
perl-Term-ReadLine-Gnu 1.36-1 OK
perl-Term-ReadLine-Gnu-debuginfo 1.36-1 OK
perl-Term-ReadLine-Perl 1.0303-6 OK
perl-TermReadKey 2.38-1 OK
perl-TermReadKey-debuginfo 2.38-1 OK
perl-Test-Base 0.89-1 OK
perl-Test-CPAN-Meta 0.25-2 OK
perl-Test-Deep 1.128-1 OK
perl-Test-Differences 0.67-1 OK
perl-Test-EOL 2.00-2 OK
perl-Test-Exception 0.43-2 OK
perl-Test-Fatal 0.014-3 OK
perl-Test-Harness 3.42-1 OK
perl-Test-LeakTrace 0.16-2 OK
perl-Test-LeakTrace-debuginfo 0.16-2 OK
perl-Test-MockModule 0.171.0-1 OK
perl-Test-NoTabs 2.02-1 OK
perl-Test-NoWarnings 1.04-5 OK
perl-Test-Pod 1.52-1 OK
perl-Test-Pod-Coverage 1.10-3 OK
perl-Test-Reporter 1.62-3 OK
perl-Test-Reporter-Transport-Metabase 1.999010-2 OK
perl-Test-Requires 0.10-2 OK
perl-Test-Script 1.26-1 OK
perl-Test-Simple 1.302168-1 OK
perl-Test-TrailingSpace 0.0302-1 OK
perl-Test-Warn 0.36-1 OK
perl-Test-Warnings 0.027-1 OK
perl-Test-Without-Module 0.20-2 OK
perl-Test-YAML 1.07-1 OK
perl-Text-BibTeX 0.88-1 OK
perl-Text-BibTeX-debuginfo 0.88-1 OK
perl-Text-CharWidth 0.04-4 OK
perl-Text-CharWidth-debuginfo 0.04-4 OK
perl-Text-CSV 2.00-1 OK
perl-Text-CSV_XS 1.40-1 OK
perl-Text-CSV_XS-debuginfo 1.40-1 OK
perl-Text-Diff 1.45-2 OK
perl-Text-Glob 0.11-2 OK
perl-Text-Roman 3.5-2 OK
perl-Text-Template 1.58-1 OK
perl-Text-WrapI18N 0.06-4 OK
perl-Tie-Cycle 1.225-2 OK
perl-TimeDate 2.30-3 OK
perl-Tk 804.034-1 OK
perl-Tk-Canvas-GradientColor 1.06-2 OK
perl-Tk-ColoredButton 1.05-3 OK
perl-Tk-debuginfo 804.034-1 OK
perl-Tk-EntryCheck 0.04-3 OK
perl-Tk-Getopt 0.51-1 OK
perl-Tk-Pod 0.9943-1 OK
perl-Try-Tiny 0.30-1 OK
perl-Types-Serialiser 1.0-4 OK
perl-Unicode-Collate 1.27-1 OK
perl-Unicode-Collate-debuginfo 1.27-1 OK
perl-Unicode-LineBreak 2019.001-1 OK
perl-Unicode-LineBreak-debuginfo 2019.001-1 OK
perl-Unicode-Normalize 1.26-1 OK
perl-Unicode-Normalize-debuginfo 1.25-2 OK
perl-URI 1.76-1 OK
perl-User-Identity 0.99-1 OK
perl-Variable-Magic 0.62-1 OK
perl-Win32 0.52-2 OK
perl-Win32-API 0.84-2 OK
perl-Win32-API-debuginfo 0.84-2 OK
perl-Win32-debuginfo 0.52-2 OK
perl-Win32-GUI 1.14-1 OK
perl-Win32-GUI-debuginfo 1.14-1 OK
perl-WWW-Curl 4.17-3 OK
perl-WWW-Curl-debuginfo 4.17-3 OK
perl-WWW-RobotRules 6.02-6 OK
perl-Wx 0.9932-1 OK
perl-Wx-build 0.9932-1 OK
perl-Wx-debuginfo 0.9932-1 OK
perl-Xfce4-Xfconf 4.12.0-2 OK
perl-XML-DOM 1.46-2 OK
perl-XML-LibXML 2.0134-2 OK
perl-XML-LibXML-debuginfo 2.0134-2 OK
perl-XML-LibXML-Simple 0.99-1 OK
perl-XML-LibXSLT 1.96-1 OK
perl-XML-LibXSLT-debuginfo 1.96-1 OK
perl-XML-NamespaceSupport 1.12-2 OK
perl-XML-Parser 2.46-1 OK
perl-XML-Parser-debuginfo 2.46-1 OK
perl-XML-RegExp 0.04-3 OK
perl-XML-SAX 1.02-1 OK
perl-XML-SAX-Base 1.09-2 OK
perl-XML-SAX-Expat 0.51-3 OK
perl-XML-Simple 2.25-1 OK
perl-XML-Stream 1.24-2 OK
perl-XML-Writer 0.625-2 OK
perl-XML-XPath 1.44-1 OK
perl-XSLoader 0.24-2 OK
perl-YAML 1.29-1 OK
perl-YAML-LibYAML 0.80-1 OK
perl-YAML-LibYAML-debuginfo 0.80-1 OK
perl-YAML-Tiny 1.73-1 OK
perl-zinnia 0.06-10 OK
perl_autorebase 5.26.3-2 OK
perl_base 5.26.3-2 OK
perl_manpages 5.26.3-2 OK
perl_pods 5.26.3-2 OK
php 7.3.7-1 OK
php-zip 7.3.7-1 OK
pkg-config 1.6.0-1 OK
pkgconf 1.6.0-1 OK
poppler-data 0.4.8-1 OK
postgresql 12.1-1 OK
postgresql-client 12.1-1 OK
postgresql-plperl 12.1-1 OK
preview-latex 12.1-1 OK
procps-debuginfo 3.2.8-5 OK
procps-ng 3.3.15-1 OK
procps-ng-debuginfo 3.3.15-1 OK
pstotext 1.9-1 OK
publicsuffix-list-dafsa 20190717-1 OK
putty 0.69-1 OK
putty-debuginfo 0.69-1 OK
pwget 2015.0927+git36776ae-1 OK
python-chm 0.8.4-12 OK
python-fastimport 0.9.2-2 OK
python-gi-common 3.26.1-2 OK
python-pip-wheel 19.2.3-1 OK
python-pyqt4-common 4.12.1-1 OK
python-pyqt4-debuginfo 4.12.1-1 OK
python-pyqt4-devel 4.12.1-1 OK
python-pyqt5-common 5.9.2-1 OK
python-pyqt5-debuginfo 5.9.2-1 OK
python-pyqt5-devel 5.9.2-1 OK
python-pyqt5-qt3d-common 5.9.2-1 OK
python-pyqt5-qt3d-debuginfo 5.9.2-1 OK
python-pyqt5-qt3d-devel 5.9.2-1 OK
python-pyqt5-qtchart-common 5.9.2-1 OK
python-pyqt5-qtchart-debuginfo 5.9.2-1 OK
python-pyqt5-qtchart-devel 5.9.2-1 OK
python-pyqt5-qtdatavisualization-common 5.9.2-1 OK
python-pyqt5-qtdatavisualization-debuginfo 5.9.2-1 OK
python-pyqt5-qtdatavisualization-devel 5.9.2-1 OK
python-setuptools-wheel 41.2.0-1 OK
python2 2.7.16-1 OK
python2-pyqt4 4.12.1-1 OK
python2-pyqt4-qsci 2.10.2-1 OK
python2-pyqt5 5.9.2-1 OK
python2-pyqt5-qsci 2.10.2-1 OK
python2-pyqt5-qt3d 5.9.2-1 OK
python2-pyqt5-qtchart 5.9.2-1 OK
python2-pyqt5-qtdatavisualization 5.9.2-1 OK
python2-sip 4.19.6-1 OK
python27 2.7.16-1 OK
python27-bsddb3 6.2.6-1 OK
python27-cairo 1.18.1-1 OK
python27-cffi 1.12.2-1 OK
python27-chardet 3.0.4-1 OK
python27-clang 8.0.1-1 OK
python27-dbus 1.2.8-1 OK
python27-gi 3.26.1-2 OK
python27-imaging 5.4.1-1 OK
python27-numpy 1.16.2-1 OK
python27-olefile 0.46-1 OK
python27-ply 3.11-1 OK
python27-pycparser 2.19-1 OK
python27-pygments 2.3.1-1 OK
python27-setuptools 41.2.0-1 OK
python3 3.6.8-1 OK
python3-pyqt4 4.12.1-1 OK
python3-pyqt4-qsci 2.10.2-1 OK
python3-pyqt5 5.9.2-1 OK
python3-pyqt5-qsci 2.10.2-1 OK
python3-pyqt5-qt3d 5.9.2-1 OK
python3-pyqt5-qtchart 5.9.2-1 OK
python3-pyqt5-qtdatavisualization 5.9.2-1 OK
python3-sip 4.19.6-1 OK
python36 3.6.9-1 OK
python36-cairo 1.18.1-1 OK
python36-cffi 1.12.2-1 OK
python36-chardet 3.0.4-1 OK
python36-dbus 1.2.8-1 OK
python36-gi 3.26.1-2 OK
python36-imaging 5.4.1-1 OK
python36-olefile 0.46-1 OK
python36-ply 3.11-1 OK
python36-pycparser 2.19-1 OK
python36-pygments 2.3.1-1 OK
qpdf 9.1.0-1 OK
qt5-linguist-tools 5.9.4-1 OK
qt5-x11extras-debuginfo 5.9.4-1 OK
qt5-x11extras-doc 5.9.4-1 OK
quazip-debuginfo 0.6.2-1 OK
rebase 4.4.4-2 OK
rsh 0.17-2 OK
rsh-debuginfo 0.17-2 OK
rsh-server 0.17-2 OK
rsync 3.1.2-1 OK
ruby 2.6.4-1 OK
ruby-builder 3.2.3-1 OK
ruby-did_you_mean 1.2.2-1 OK
ruby-minitest 5.10.3-1 OK
ruby-minitest4 5.10.3-1 OK
ruby-net-telnet 0.2.0-1 OK
ruby-net-telnet-doc 0.2.0-1 OK
ruby-rake 12.3.2-1 OK
ruby-rdoc 6.1.2-1 OK
rubygems 3.0.3-1 OK
run 1.3.4-2 OK
rzip 2.1-1 OK
scintilla-win32 3.6.6-1 OK
sed 4.4-1 OK
setxkbmap 1.3.2-1 OK
sgml-common 0.6.3-3 OK
shared-mime-info 1.8-1 OK
showfont-debuginfo 1.0.4-1 OK
sound-theme-freedesktop 0.8-1 OK
soundfont-fluid-gm 3.1-1 OK
soundfont-fluid-gs 3.1-1 OK
soundfont-fluid-lite-patches 3.1-1 OK
soundfont-utils 0.4-1 OK
speech-dispatcher 0.8.7-1 OK
splitpatch 0.0+20131223+gitb13d810-1 OK
subversion 1.13.0-1 OK
subversion-debuginfo 1.13.0-1 OK
subversion-devel 1.13.0-1 OK
subversion-gnome 1.13.0-1 OK
subversion-httpd 1.13.0-1 OK
subversion-perl 1.13.0-1 OK
subversion-python 1.13.0-1 OK
subversion-ruby 1.13.0-1 OK
subversion-tools 1.13.0-1 OK
sudoku 1.0.1-2 OK
suomi-malaga 1.19-1 OK
svn-load 1.3-1 OK
svn_load_dirs 1.9.2-2 OK
t1lib-x11 5.1.2-13 OK
t1lib5 5.1.2-13 OK
t1libx5 5.1.2-13 OK
t1utils 1.39-1 OK
tar 1.29-1 OK
tcl 8.6.8-1 OK
tcl-tk 8.6.8-1 OK
terminfo 6.1-1.20190727 OK
terminfo-extra 6.1-1.20190727 OK
texinfo 6.7-1 OK
texinfo-tex 6.7-1 OK
texlive 20190509-1 OK
texlive-collection-basic 20190509-1 OK
texlive-collection-bibtexextra 20190913-1 OK
texlive-collection-binextra 20190509-1 OK
texlive-collection-fontsrecommended 20190509-1 OK
texlive-collection-fontutils 20190509-1 OK
texlive-collection-langenglish 20190509-1 OK
texlive-collection-latex 20190509-1 OK
texlive-collection-latexextra 20190509-1 OK
texlive-collection-latexrecommended 20190509-1 OK
texlive-collection-mathscience 20190509-1 OK
texlive-collection-pictures 20190913-1 OK
tftp 5.2-1 OK
tftp-server 5.2-1 OK
tiff 4.0.9-1 OK
tin 2.4.3-1 OK
transfig 3.2.7a-1 OK
ttf2pt1 3.4.4-1 OK
twm 1.0.10-1 OK
tzcode 2019c-1 OK
tzdata 2019c-1 OK
unifont-debuginfo 8.0.01-1 OK
unifont-fonts 8.0.01-1 OK
unifont-viewer 8.0.01-1 OK
unzip 6.0-17 OK
unzip-debuginfo 6.0-17 OK
urw-base35-fonts 20170801-5 OK
urw-base35-fonts-legacy 20170801-5 OK
util-linux 2.33.1-1 OK
vala-libsecret1 0.18.5-1 OK
vim-minimal 8.1.1772-1 OK
w32api-headers 7.0.0-1 OK
w32api-runtime 7.0.0-1 OK
w3m 0.5.3-3 OK
wcd 6.0.3-1 OK
wcd-debuginfo 6.0.3-1 OK
weechat 2.7-1 OK
weechat-perl 2.7-1 OK
wget 1.19.1-2 OK
wget-debuginfo 1.19.1-2 OK
which 2.20-2 OK
whois 5.4.0-1 OK
WindowMaker 0.95.8-2 OK
windows-default-manifest 6.4-1 OK
wordview 0.95-1 OK
wv 1.2.9-2 OK
x11perf 1.6.1-1 OK
x11perf-debuginfo 1.6.1-1 OK
x11vnc 0.9.14-2 OK
x11vnc-debuginfo 0.9.14-2 OK
xauth 1.1-1 OK
xcursor-themes 1.0.6-1 OK
xdg-user-dirs 0.16-1 OK
xf86-video-dummy 0.3.8-1 OK
xf86-video-nested 0.1.0-8.20160719git OK
xfconfd 4.12.0-2 OK
xfontsel 1.0.6-1 OK
xfs 1.2.0-1 OK
xhost 1.0.8-1 OK
xhost-debuginfo 1.0.8-1 OK
xhtml2ps 1.0b7-2 OK
xinit 1.4.1-1 OK
xinit-debuginfo 1.4.1-1 OK
xkbcomp 1.4.2-1 OK
xkeyboard-config 2.23.1-1 OK
xlsx2csv 0.11+20120814+gitf54ab78-2 OK
xman 1.1.5-1 OK
xmh 1.0.3-1 OK
xmlto 0.0.26-1 OK
xmodmap 1.0.10-1 OK
xorg-cf-files 1.0.6-1 OK
xorg-server 1.20.5-3 OK
xorg-server-common 1.20.5-3 OK
xorg-x11-fonts-cyrillic 7.5-4 OK
xorg-x11-fonts-dpi100 7.5-4 OK
xorg-x11-fonts-dpi75 7.5-4 OK
xorg-x11-fonts-ethiopic 7.5-4 OK
xorg-x11-fonts-misc 7.5-4 OK
xorg-x11-fonts-Type1 7.5-4 OK
xorgproto 2019.1-1 OK
xpdf 4.02-1 OK
xpr 1.0.5-1 OK
xrdb 1.2.0-1 OK
xterm 348-1 OK
xterm-debuginfo 348-1 OK
xwd 1.0.7-1 OK
xwin-xdg-menu 20170321-1 OK
xz 5.2.4-1 OK
zenity 3.26.0-1 OK
zip 3.0-12 OK
zip-debuginfo 3.0-12 OK
zlib-devel 1.2.11-1 OK
zlib0 1.2.11-1 OK
znc 1.7.5-1 OK
znc-perl 1.7.5-1 OK
zziplib 0.13.68-1 OK
zziplib-debuginfo 0.13.68-1 OK
[-- Attachment #3: Type: text/plain, Size: 219 bytes --]
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: cin and read(*,*) not waiting for kbd input in gdb
2020-01-16 21:03 cin and read(*,*) not waiting for kbd input in gdb Rockefeller, Harry
@ 2020-01-17 15:40 ` Jon Turney
2020-01-17 17:34 ` Rockefeller, Harry
0 siblings, 1 reply; 7+ messages in thread
From: Jon Turney @ 2020-01-17 15:40 UTC (permalink / raw)
To: The Cygwin Mailing List; +Cc: Rockefeller, Harry
On 16/01/2020 21:02, Rockefeller, Harry wrote:
> Both the Fortran and cpp used to work correctly when run in gdb.
Thanks for reporting this problem.
I assume this means that this worked with gdb-8.1.1-1, but not with
gdb-8.2.1-1 (Made available for testing 2019-03-21 [1], promoted to
current 2020-01-07 [2])
Firstly, can I suggest that if a working gdb is important to you, you
try test versions when they are available. Wider testing helps me make
good releases of gdb.
Secondly, can you try the recently made test release of gdb-8.3.1-1 [3],
to see if this behaves differently? If that doesn't help, you can
downgrade to 8.1.1-1 for the moment...
[1] https://cygwin.com/ml/cygwin-announce/2019-03/msg00032.html
[2] https://cygwin.com/ml/cygwin/2020-01/msg00064.html
[3] https://cygwin.com/ml/cygwin-announce/2019-12/msg00033.html
> FWIW, Both Fortran and cpp work correctly, stopping for keyboard input, when run outside of gdb.
>
> But now, code simply doesn't stop to take keyboard input inside gdb.
>
> I've tried simplifying cpp problem with simple code.
> e.g.
> #include <iostream> // to enable terminal printout
> #include <cmath> // pow function
> int main() {
> float request_time_to_run(void);
> float a=0.0f;
> a = request_time_to_run();
> printf ("a is %f\n", a);
> }
> float request_time_to_run() {
> float tm = 0.0; // Time duration (sec)
> std::string ans = ""; // interactive answer for time duration
> std::cout << "Supply the equivalent of runtime in seconds. \n";
> std::cout << "Note: time=0 will stop main. \n";
> std::cin >> ans;
> if ( (int)(ans[0]) < 48 || (int)(ans[0] > 57) ) {
> tm = 1.0;
> } else {
> int i;
> int j = 0;
> tm = 0.0;
> for (i=ans.length() - 1; i>=0; i--) {
> tm += ((int)(ans[i]) - 48) * pow( 10, j++);
> }
> }
> return tm;
> }
>
I'm not able to reproduce this problem. Perhaps you can provide a
similar transcript showing the steps to reproduce?
> $ gdb rockefeller.exe
> GNU gdb (GDB) (Cygwin 8.2.1-1) 8.2.1
> Copyright (C) 2018 Free Software Foundation, Inc.
> License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
> This is free software: you are free to change and redistribute it.
> There is NO WARRANTY, to the extent permitted by law.
> Type "show copying" and "show warranty" for details.
> This GDB was configured as "x86_64-pc-cygwin".
> Type "show configuration" for configuration details.
> For bug reporting instructions, please see:
> <http://www.gnu.org/software/gdb/bugs/>.
> Find the GDB manual and other documentation resources online at:
> <http://www.gnu.org/software/gdb/documentation/>.
>
> For help, type "help".
> Type "apropos word" to search for commands related to "word"...
> Reading symbols from rockefeller.exe...done.
> (gdb) b request_time_to_run()
> Breakpoint 1 at 0x1004010e8: file rockefeller.cpp, line 10.
> (gdb) r
> Starting program: /wip/rockefeller.exe
>
> Thread 1 "rockefeller" hit Breakpoint 1, request_time_to_run () at rockefeller.cpp:10
> 10 float tm = 0.0; // Time duration (sec)
> (gdb) n
> 11 std::string ans = ""; // interactive answer for time duration
> (gdb) n
> 12 std::cout << "Supply the equivalent of runtime in seconds. \n";
> (gdb) n
> Supply the equivalent of runtime in seconds.
> 13 std::cout << "Note: time=0 will stop main. \n";
> (gdb) n
> Note: time=0 will stop main.
> 14 std::cin >> ans;
> (gdb) n
> 1
> 15 if ( (int)(ans[0]) < 48 || (int)(ans[0] > 57) ) {
> (gdb) n
> 19 int j = 0;
> (gdb) c
> Continuing.
> a is 1.000000
> [Inferior 1 (process 12660) exited normally]
> But, simple stuff does run correctly in gdb stopping for terminal input at
> std::cin >> ans;
> FWIW, for simple cpp above neither the cout nor the cin works directly (not running in gdb).
Although not related to gdb, that would be a serious cygwin bug.
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: cin and read(*,*) not waiting for kbd input in gdb
2020-01-17 15:40 ` Jon Turney
@ 2020-01-17 17:34 ` Rockefeller, Harry
2020-01-21 21:58 ` Rockefeller, Harry
0 siblings, 1 reply; 7+ messages in thread
From: Rockefeller, Harry @ 2020-01-17 17:34 UTC (permalink / raw)
To: Jon Turney, The Cygwin Mailing List
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="utf-8", Size: 5270 bytes --]
>>-----Original Message-----
>>From: Jon Turney <jon.turney@dronecode.org.uk>
>Sent: Friday, January 17, 2020 9:40 AM
>To: The Cygwin Mailing List <cygwin@cygwin.com>
>Cc: Rockefeller, Harry <Harry.Rockefeller@flightsafety.com>
>Subject: Re: cin and read(*,*) not waiting for kbd input in gdb
>EXTERNAL EMAIL: STOP and verify sender address, links, and attachments before taking action.
>On 16/01/2020 21:02, Rockefeller, Harry wrote:
>> Both the Fortran and cpp used to work correctly when run in gdb.
>
>Thanks for reporting this problem.
>
>I assume this means that this worked with gdb-8.1.1-1, but not with
>gdb-8.2.1-1 (Made available for testing 2019-03-21 [1], promoted to current 2020-01-07 [2])
>
>Firstly, can I suggest that if a working gdb is important to you, you try test versions when they are available. Wider testing helps me make good releases of gdb.
>Secondly, can you try the recently made test release of gdb-8.3.1-1 [3], to see if this behaves differently? If that doesn't help, you can downgrade to 8.1.1-1 for the moment...
I certainly plan to do that as soon as problem(s) are identified.
>[1] https://cygwin.com/ml/cygwin-announce/2019-03/msg00032.html
>[2] https://cygwin.com/ml/cygwin/2020-01/msg00064.html
>[3] https://cygwin.com/ml/cygwin-announce/2019-12/msg00033.html
>
>> FWIW, Both Fortran and cpp work correctly, stopping for keyboard input, when run outside of gdb.
>>
>> But now, code simply doesn't stop to take keyboard input inside gdb.
>>
>> [C++ test code omitted for brevity]
>I'm not able to reproduce this problem. Perhaps you can provide a similar transcript showing the steps to reproduce?
I see that when I ran it I also had a few lines like these:
[New Thread 6188.0x1e54].
Since I develop mostly for "hard" real time, my default boot is a Win7 with RTX.
I rebooted my pc with the Win7 alone (no RTX) and the stdin does work as you show below.
I am working with my software support staff to find out if anything changed recently in my PC boot stuff.
>> $ gdb rockefeller.exe
>> GNU gdb (GDB) (Cygwin 8.2.1-1) 8.2.1
>> Copyright (C) 2018 Free Software Foundation, Inc.
>> License GPLv3+: GNU GPL version 3 or later
>> <http://gnu.org/licenses/gpl.html>
>> This is free software: you are free to change and redistribute it.
>> There is NO WARRANTY, to the extent permitted by law.
>> Type "show copying" and "show warranty" for details.
>> This GDB was configured as "x86_64-pc-cygwin".
>> Type "show configuration" for configuration details.
>> For bug reporting instructions, please see:
>> <http://www.gnu.org/software/gdb/bugs/>.
>> Find the GDB manual and other documentation resources online at:
>> <http://www.gnu.org/software/gdb/documentation/>.
>>
>> For help, type "help".
>> Type "apropos word" to search for commands related to "word"...
>> Reading symbols from rockefeller.exe...done.
>> (gdb) b request_time_to_run()
>> Breakpoint 1 at 0x1004010e8: file rockefeller.cpp, line 10.
>> (gdb) r
>> Starting program: /wip/rockefeller.exe
>>
>> Thread 1 "rockefeller" hit Breakpoint 1, request_time_to_run () at rockefeller.cpp:10
>> 10 float tm = 0.0; // Time duration (sec)
>> (gdb) n
>> 11 std::string ans = ""; // interactive answer for time duration
>> (gdb) n
>> 12 std::cout << "Supply the equivalent of runtime in seconds. \n";
>> (gdb) n
>> Supply the equivalent of runtime in seconds.
>> 13 std::cout << "Note: time=0 will stop main. \n";
>> (gdb) n
>> Note: time=0 will stop main.
>> 14 std::cin >> ans;
>> (gdb) n
>> 1
>> 15 if ( (int)(ans[0]) < 48 || (int)(ans[0] > 57) ) {
>> (gdb) n
>> 19 int j = 0;
>> (gdb) c
>> Continuing.
>> a is 1.000000
>> [Inferior 1 (process 12660) exited normally]
>> But, simple stuff does run correctly in gdb stopping for terminal input at
>> std::cin >> ans;
>> FWIW, for simple cpp above neither the cout nor the cin works directly (not running in gdb).
>Although not related to gdb, that would be a serious cygwin bug.
I am still in the Win7 only boot on my PC ... no RTX
More on this last problem. This time using Fortran.
Test code:
program test
implicit none
real cycle_time_preset /0.0/ ! (seconds)
real cycle_length /0.0/ ! (seconds)
do
if (cycle_time_preset.le.0.0) then
write(*,*)'Supply the equivalent of run time in seconds.'
write(*,"('(Note: a negative run time will stop run): ',$)")
read(*,*) cycle_length
else
cycle_length = cycle_time_preset
end if
if (cycle_length .lt. 0.0) stop 'normal termination'
end do
stop
end
$ /usr/bin/gfortran -g -ffree-form -ffree-line-length-none -Wunused -ffpe-trap=invalid,zero,overflow -o test.exe test.f
harryr@HARRYR-PC ~/
$ test.exe
$
Neither standard output nor input works.
FWIW, running in gdb both standard input and output work.
\x03BKCB\x1cØ\x19[H\x1c\^[Ü\x1cÎ\b\b\b\b\b\b\x1a\x1d\x1d\x1c\x0eËØÞYÝÚ[ÛÛKÜ\x1cØ\x19[\Ë\x1d^[[\x03BTN\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\x1a\x1d\x1d\x1c\x0eËØÞYÝÚ[ÛÛKÙ\KÃB^[ØÝ[Y[\x18]\x1a[Û\b\b\b\b\b\b\b\b\x1a\x1d\x1d\x1c\x0eËØÞYÝÚ[ÛÛKÙ^[ØÜË\x1d^[[\x03B[ÝXØÜXH\x1a[Î\b\b\b\b\b\x1a\x1d\x1d\x1c\x0eËØÞYÝÚ[ÛÛKÛ[\vÈÝ[ÝXØÜXK\Ú[\^[\x19CBB
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: cin and read(*,*) not waiting for kbd input in gdb
2020-01-17 17:34 ` Rockefeller, Harry
@ 2020-01-21 21:58 ` Rockefeller, Harry
2020-01-27 16:46 ` Rockefeller, Harry
0 siblings, 1 reply; 7+ messages in thread
From: Rockefeller, Harry @ 2020-01-21 21:58 UTC (permalink / raw)
To: The Cygwin Mailing List
>-----Original Message-----
> From: cygwin-owner@cygwin.com <cygwin-owner@cygwin.com> On Behalf Of Rockefeller, Harry
>Sent: Friday, January 17, 2020 11:35 AM
>To: Jon Turney <jon.turney@dronecode.org.uk>; The Cygwin Mailing List <cygwin@cygwin.com>
>Subject: RE: cin and read(*,*) not waiting for kbd input in gdb
>>>-----Original Message-----
>>>From: Jon Turney <jon.turney@dronecode.org.uk>
>>Sent: Friday, January 17, 2020 9:40 AM
>>To: The Cygwin Mailing List <cygwin@cygwin.com>
>>Cc: Rockefeller, Harry <Harry.Rockefeller@flightsafety.com>
>>Subject: Re: cin and read(*,*) not waiting for kbd input in gdb
>>EXTERNAL EMAIL: STOP and verify sender address, links, and attachments before taking action.
>>On 16/01/2020 21:02, Rockefeller, Harry wrote:
>>> Both the Fortran and cpp used to work correctly when run in gdb.
>>
>>Thanks for reporting this problem.
>>
>>I assume this means that this worked with gdb-8.1.1-1, but not with
>>gdb-8.2.1-1 (Made available for testing 2019-03-21 [1], promoted to
>>current 2020-01-07 [2])
>>
>>Firstly, can I suggest that if a working gdb is important to you, you try test versions when they are available. Wider testing helps me make good releases of gdb.
>>Secondly, can you try the recently made test release of gdb-8.3.1-1 [3], to see if this behaves differently? If that doesn't help, you can downgrade to 8.1.1-1 for the moment...
>I certainly plan to do that as soon as problem(s) are identified.
>>[1] https://cygwin.com/ml/cygwin-announce/2019-03/msg00032.html
>>[2] https://cygwin.com/ml/cygwin/2020-01/msg00064.html
>>[3] https://cygwin.com/ml/cygwin-announce/2019-12/msg00033.html
>>
>>> FWIW, Both Fortran and cpp work correctly, stopping for keyboard input, when run outside of gdb.
>>>
>>> But now, code simply doesn't stop to take keyboard input inside gdb.
>>>
>>> [C++ test code omitted for brevity]
>>I'm not able to reproduce this problem. Perhaps you can provide a similar transcript showing the steps to reproduce?
>I see that when I ran it I also had a few lines like these:
>[New Thread 6188.0x1e54].
>Since I develop mostly for "hard" real time, my default boot is a Win7 with RTX.
>I rebooted my pc with the Win7 alone (no RTX) and the stdin does work as you show below.
>I am working with my software support staff to find out if anything changed recently in my PC boot stuff.
>>> $ gdb rockefeller.exe
>>> GNU gdb (GDB) (Cygwin 8.2.1-1) 8.2.1
>>> Copyright (C) 2018 Free Software Foundation, Inc.
>>> License GPLv3+: GNU GPL version 3 or later
>>> <http://gnu.org/licenses/gpl.html>
>>> This is free software: you are free to change and redistribute it.
>>> There is NO WARRANTY, to the extent permitted by law.
>>> Type "show copying" and "show warranty" for details.
>>> This GDB was configured as "x86_64-pc-cygwin".
>>> Type "show configuration" for configuration details.
>>> For bug reporting instructions, please see:
>>> <http://www.gnu.org/software/gdb/bugs/>.
>>> Find the GDB manual and other documentation resources online at:
>>> <http://www.gnu.org/software/gdb/documentation/>.
>>>
>>> For help, type "help".
>>> Type "apropos word" to search for commands related to "word"...
>>> Reading symbols from rockefeller.exe...done.
>>> (gdb) b request_time_to_run()
>>> Breakpoint 1 at 0x1004010e8: file rockefeller.cpp, line 10.
>>> (gdb) r
>>> Starting program: /wip/rockefeller.exe
>>>
>>> Thread 1 "rockefeller" hit Breakpoint 1, request_time_to_run () at rockefeller.cpp:10
>>> 10 float tm = 0.0; // Time duration (sec)
>>> (gdb) n
>>> 11 std::string ans = ""; // interactive answer for time duration
>>> (gdb) n
>>> 12 std::cout << "Supply the equivalent of runtime in seconds. \n";
>>> (gdb) n
>>> Supply the equivalent of runtime in seconds.
>>> 13 std::cout << "Note: time=0 will stop main. \n";
>>> (gdb) n
>>> Note: time=0 will stop main.
>>> 14 std::cin >> ans;
>>> (gdb) n
>>> 1
>>> 15 if ( (int)(ans[0]) < 48 || (int)(ans[0] > 57) ) {
>>> (gdb) n
>>> 19 int j = 0;
>>> (gdb) c
>>> Continuing.
>>> a is 1.000000
>>> [Inferior 1 (process 12660) exited normally]
>>> But, simple stuff does run correctly in gdb stopping for terminal input at
>>> std::cin >> ans;
>>> FWIW, for simple cpp above neither the cout nor the cin works directly (not running in gdb).
>>Although not related to gdb, that would be a serious cygwin bug.
>I am still in the Win7 only boot on my PC ... no RTX
>More on this last problem. This time using Fortran.
>Test code:
> program test
> implicit none
> real cycle_time_preset /0.0/ ! (seconds)
> real cycle_length /0.0/ ! (seconds)
> do
> if (cycle_time_preset.le.0.0) then
> write(*,*)'Supply the equivalent of run time in seconds.'
> write(*,"('(Note: a negative run time will stop run): ',$)")
> read(*,*) cycle_length
>else
> cycle_length = cycle_time_preset
>end if
>if (cycle_length .lt. 0.0) stop 'normal termination'
>end do
>stop
>end
>$ /usr/bin/gfortran -g -ffree-form -ffree-line-length-none -Wunused -ffpe-trap=invalid,zero,overflow -o test.exe test.f
>harryr@HARRYR-PC ~/
>$ test.exe
>
>$
>Neither standard output nor input works.
>FWIW, running in gdb both standard input and output work.
Following your test I do not have cin wait for kbd input whenever a breakpoint is set.
In fact, if I run 'disa 1' to disable the breakpoint and then just 'run'
(to restart the program from the beginning) then
the program does pause for my keyboard input.
This happens in both my Win 7 and Win 7 - RTX OS boots.
This happens in both gdb 8.2.1-1 and 8.3.1-1. It does not happen with
Gdb version 8.1.1-1.
Egg on my face now: never mind the stuff about cin and cout
Not working when run directly. This was my error.
'gdb test.exe' ran the local test.exe, but just 'test.exe' ran /usr/bin/test.
I should have been running './test.exe'.
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 7+ messages in thread
* RE: cin and read(*,*) not waiting for kbd input in gdb
2020-01-21 21:58 ` Rockefeller, Harry
@ 2020-01-27 16:46 ` Rockefeller, Harry
2020-01-28 13:28 ` Jon Turney
0 siblings, 1 reply; 7+ messages in thread
From: Rockefeller, Harry @ 2020-01-27 16:46 UTC (permalink / raw)
To: The Cygwin Mailing List
[-- Attachment #1: Type: text/plain, Size: 4716 bytes --]
[snip]
>>>I'm not able to reproduce this problem. Perhaps you can provide a similar transcript showing the steps to reproduce?
[snip]
>>Test code:
> > program test
>> implicit none
>> real cycle_time_preset /0.0/ ! (seconds)
>> real cycle_length /0.0/ ! (seconds)
>> do
>> if (cycle_time_preset.le.0.0) then
>> write(*,*)'Supply the equivalent of run time in seconds.'
>> write(*,"('(Note: a negative run time will stop run): ',$)")
>> read(*,*) cycle_length
>>else
>> cycle_length = cycle_time_preset
>>end if
>>if (cycle_length .lt. 0.0) stop 'normal termination'
>>end do
>>stop
>>end
>>$ /usr/bin/gfortran -g -ffree-form -ffree-line-length-none -Wunused -ffpe-trap=invalid,zero,overflow -o test.exe test.f
[snip]
>Following your test I do not have cin wait for kbd input whenever a breakpoint is set.
>In fact, if I run 'disa 1' to disable the breakpoint and then just 'run'
>(to restart the program from the beginning) then the program does pause for my keyboard input.
>This happens in both my Win 7 and Win 7 - RTX OS boots.
>This happens in both gdb 8.2.1-1 and 8.3.1-1. It does not happen with Gdb version 8.1.1-1.
[snip]
I don't know if this is a gdb or a Cygwin implementation of gdb that is a problem.
Since I can go back to gdb version 8.1.1-1 this is not a problem for me now.
Here is a test case using the Fortran source above:
$ gfortran -g test1.f -o test1.exe
harryr@HARRYR-PC ~/d62sim/Excel
$ gdb test1
GNU gdb (GDB) (Cygwin 8.3.1-1) 8.3.1
Copyright (C) 2019 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Type "show copying" and "show warranty" for details.
This GDB was configured as "x86_64-pc-cygwin".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from test1...
(gdb) b test1.f:9
Breakpoint 1 at 0x100401140: file test1.f, line 9.
(gdb) r
Starting program: /cygdrive/c/Users/harryr/d62sim/Excel/test1
[New Thread 7696.0x2a9c]
[New Thread 7696.0xf0c]
[New Thread 7696.0x22f8]
Supply the equivalent of real time test in seconds.
(Note: a negative test length will stop run):
Thread 1 "test1" hit Breakpoint 1, test1 () at test1.f:9
9 read(*,*) cycle_length
(gdb) b unix.c:271
Breakpoint 2 at 0x3df9bb3c0: file /usr/src/debug/gcc-7.4.0-1/libgfortran/io/unix.c, line 272.
(gdb) c
Continuing.
Thread 1 "test1" hit Breakpoint 2, _gfortrani_flush_if_preconnected (s=0x80004e300) at /usr/src/debug/gcc-7.4.0-1/libgfortran/io/unix.c:272
272 {
(gdb) s
275 fd = ((unix_stream *) s)->fd;
(gdb)
276 if (fd == STDIN_FILENO)
(gdb)
277 fflush (stdin);
(gdb)
__getreent () at /usr/src/debug/cygwin-3.1.2-1/winsup/cygwin/thread.cc:89
89 return &_my_tls.local_clib;
(gdb)
NtCurrentTeb () at /usr/src/debug/cygwin-3.1.2-1/winsup/cygwin/thread.cc:89
89 return &_my_tls.local_clib;
(gdb)
__readgsqword (Offset=48) at /usr/x86_64-pc-cygwin/sys-root/usr/include/w32api/psdk_inc/intrin-impl.h:714
714 /usr/x86_64-pc-cygwin/sys-root/usr/include/w32api/psdk_inc/intrin-impl.h: No such file or directory.
(gdb)
__getreent () at /usr/src/debug/cygwin-3.1.2-1/winsup/cygwin/thread.cc:89
89 return &_my_tls.local_clib;
(gdb)
90 }
(gdb)
_gfortrani_flush_if_preconnected (s=<optimized out>) at /usr/src/debug/gcc-7.4.0-1/libgfortran/io/unix.c:282
282 }
(gdb)
277 fflush (stdin);
(gdb)
/wip/cygport-git/gdb/gdb-8.3.1-1.x86_64/src/gdb-8.3.1/gdb/infrun.c:2602: internal-error: void resume_1(gdb_signal): Assertion `pc_in_thread_step_range (pc, tp)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)y
This is a bug, please report it. For instructions, see:
<http://www.gnu.org/software/gdb/bugs/>.
/wip/cygport-git/gdb/gdb-8.3.1-1.x86_64/src/gdb-8.3.1/gdb/infrun.c:2602: internal-error: void resume_1(gdb_signal): Assertion `pc_in_thread_step_range (pc, tp)' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Create a core file of GDB? (y or n) y
Aborted (core dumped)
[-- Attachment #2: gdb.exe.stackdump --]
[-- Type: application/octet-stream, Size: 1993 bytes --]
Stack trace:
Frame Function Args
000FFFFAF70 00180061979 (00000000000, 00000010A4C, 001801758FA, 000FFFFDE50)
000FFFFDE50 0018006393C (00800B71C90, 00800000000, 00000000280, 00000000000)
000FFFFB690 0018013CF37 (001800D25CC, 00000000000, 0B5E6171FFB, 00000000000)
0018031DC50 00180163324 (0001B23A1BB, 001008ED762, 233B6DE79C954B3E, 00000000059)
0018031DC50 0018013952B (00000000000, 00180116DB5, 000FFFFB910, 0018031DC50)
0018031DC50 0018013985F (001006C8646, FFFFFFFFFFFFFFFF, 001008EDA30, FFFFFFFFFFFFFFFF)
0018031DC50 001006C60BA (00800BA9668, 00000000017, 00000000002, 001008EE170)
0018031DC50 001006C9035 (00000000000, 00800340D70, 00100844280, 000FFFFBB38)
00000000001 001006C91DE (00100890B47, 00000000000, 233B6DE700000000, 000FFFFBB38)
00000000001 0010049262A (0080080A530, 00000000000, 00100895710, 00100891E18)
00000000001 00100572410 (001005710A4, 008013E9C30, 000FFFFC8A0, 00000000120)
00100844280 00100572E37 (00100695D9A, 00000000000, 00180199C87, 500000000000101)
0018031DC50 00100573E14 (00000000000, 00000000000, 00000000000, 00000000000)
00000000000 00100576859 (00000000000, 000FFFFFFFF, 00000000000, 00000000000)
000FFFFC570 0010057A648 (00000000000, 0018012FF3E, 00000000000, 000FFFFC7AC)
0018031DC50 0010057B982 (00100491069, 000FFFFC9C8, 0018031DC50, 00100844280)
000FFFFCA90 0010051A54C (233B6DE79C954B3E, 00800057380, 00000000001, 0010047EC60)
000FFFFCA90 0010051A676 (001006A2520, 00000000000, 00000000000, 00100844280)
000FFFFCA90 00100597E9F (00100000000, 000FFFFC94C, 0018015CDB0, 000FFFFCAD8)
000FFFFCA90 00100598FFD (001803A0318, 00180394828, 000FFFFCC70, 00000000002)
000FFFFCCD0 001007F6739 (00000000020, 30001000000FF00, 0018004A7BA, 00000E30000)
000FFFFCCD0 0018004A826 (00000000000, 00000000000, 00000000000, 00000000000)
00000000000 00180048353 (00000000000, 00000000000, 00000000000, 00000000000)
000FFFFFFF0 00180048404 (00000000000, 00000000000, 00000000000, 00000000000)
End of stack trace
[-- Attachment #3: Type: text/plain, Size: 219 bytes --]
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: cin and read(*,*) not waiting for kbd input in gdb
2020-01-27 16:46 ` Rockefeller, Harry
@ 2020-01-28 13:28 ` Jon Turney
[not found] ` <2c4e575b182d46bba28e9fd688a0c9e7@vsrv060ex01.ssd.fsi.com>
0 siblings, 1 reply; 7+ messages in thread
From: Jon Turney @ 2020-01-28 13:28 UTC (permalink / raw)
To: The Cygwin Mailing List; +Cc: Rockefeller, Harry
On 27/01/2020 16:44, Rockefeller, Harry wrote:
> I don't know if this is a gdb or a Cygwin implementation of gdb that is a problem.
> Since I can go back to gdb version 8.1.1-1 this is not a problem for me now.
> Here is a test case using the Fortran source above:
>
> $ gfortran -g test1.f -o test1.exe
>
> harryr@HARRYR-PC ~/d62sim/Excel
> $ gdb test1
> GNU gdb (GDB) (Cygwin 8.3.1-1) 8.3.1
[...]
> (gdb)
> 277 fflush (stdin);
> (gdb)
> /wip/cygport-git/gdb/gdb-8.3.1-1.x86_64/src/gdb-8.3.1/gdb/infrun.c:2602: internal-error: void resume_1(gdb_signal): Assertion `pc_in_thread_step_range (pc, tp)' failed.
> A problem internal to GDB has been detected,
> further debugging may prove unreliable.
> Quit this debugging session? (y or n)y
Thanks for reporting this problem, and the reproduction steps.
I can reproduce this, but this doesn't seem to be a regression as I can
also reproduce it with 8.1.1-1 (and with 7.9.1-1).
On a brief investigation this seems to be related to trying to step
through an import stub.
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: cin and read(*,*) not waiting for kbd input in gdb
[not found] ` <2c4e575b182d46bba28e9fd688a0c9e7@vsrv060ex01.ssd.fsi.com>
@ 2020-01-29 13:07 ` Jon Turney
0 siblings, 0 replies; 7+ messages in thread
From: Jon Turney @ 2020-01-29 13:07 UTC (permalink / raw)
To: The Cygwin Mailing List; +Cc: Rockefeller, Harry
On 28/01/2020 15:40, Rockefeller, Harry wrote:
> Since you and I appear to be the only ones interested in this particular problem I brought this off the
> Cygwin list, at least for now.
Please don't do this.
https://cygwin.com/problems.html#personal-email
> You are correct, and I am able to reproduce this myself as well using gdb 8.1.1-1.
> In gdb 8.1.1-1 here is the same test case with stdin running correctly using a continue after the breakpoint that caused the gdb internal error before. > Thread 1 "test1" hit Breakpoint 1, test1 () at test1.f:9
> 9 read(*,*) cycle_length
> Breakpoint 2 at 0x3df9bb3e0: file /usr/src/debug/gcc-7.4.0-1/libgfortran/io/unix.c, line 277.
> (gdb) c
> Continuing.
>
> Thread 1 "test1" hit Breakpoint 2, _gfortrani_flush_if_preconnected (s=0x80004e300) at /usr/src/debug/gcc-7.4.0-1/libgfortran/io/unix.c:277
> 277 fflush (stdin);
> (gdb) c
> Continuing.
> -1
> STOP normal termination
> [Thread 8904.0x2f34 exited with code 0]
> [Thread 8904.0x1e78 exited with code 0]
> [Inferior 1 (process 8904) exited normally]
> (gdb)
>
> Now, reloading gdb 8.2.1-1:
Again, I don't seem to be able to reproduce this:
> $ gdb ./test1
> GNU gdb (GDB) (Cygwin 8.2.1-1) 8.2.1
> Copyright (C) 2018 Free Software Foundation, Inc.
> License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
> This is free software: you are free to change and redistribute it.
> There is NO WARRANTY, to the extent permitted by law.
> Type "show copying" and "show warranty" for details.
> This GDB was configured as "x86_64-pc-cygwin".
> Type "show configuration" for configuration details.
> For bug reporting instructions, please see:
> <http://www.gnu.org/software/gdb/bugs/>.
> Find the GDB manual and other documentation resources online at:
> <http://www.gnu.org/software/gdb/documentation/>.
>
> For help, type "help".
> Type "apropos word" to search for commands related to "word"...
> Reading symbols from ./test1...done.
> (gdb) b test1.f:9
> Breakpoint 1 at 0x100401140: file test1.f, line 9.
> (gdb) r
> Starting program: /wip/test1
> Supply the equivalent of run time in seconds.
> (Note: a negative run time will stop run):
> Thread 1 "test1" hit Breakpoint 1, test () at test1.f:9
> 9 read(*,*) cycle_length
> (gdb) b unix.c:271
> Breakpoint 2 at 0x3e11eb3c0: file /usr/src/debug/gcc-7.4.0-1/libgfortran/io/unix.c, line 272.
> (gdb) c
> Continuing.
>
> Thread 1 "test1" hit Breakpoint 2, _gfortrani_flush_if_preconnected (s=0x80003b160) at /usr/src/debug/gcc-7.4.0-1/libgfo
> rtran/io/unix.c:272
> 272 {
> (gdb) c
> Continuing.
> -1
> STOP normal termination
> [Inferior 1 (process 10024) exited normally]
> (gdb)
> The only thing changed was the gdb version. I don't know how to proceed from here.
> Can you tell if this is a gdb or a "Cygwin implementation of" gdb problem?
I'm not sure what the distinction you are making here is? The problem
almost certainly exists in upstream gdb, without the few patches which
are applied in the Cygwin package of gdb.
I'd guess that this is problem is due to upstream changes in gdb,
interacting with bugs or limitations of Cygwin.
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-01-29 13:07 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-16 21:03 cin and read(*,*) not waiting for kbd input in gdb Rockefeller, Harry
2020-01-17 15:40 ` Jon Turney
2020-01-17 17:34 ` Rockefeller, Harry
2020-01-21 21:58 ` Rockefeller, Harry
2020-01-27 16:46 ` Rockefeller, Harry
2020-01-28 13:28 ` Jon Turney
[not found] ` <2c4e575b182d46bba28e9fd688a0c9e7@vsrv060ex01.ssd.fsi.com>
2020-01-29 13:07 ` Jon Turney
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).