From: Shaun Gosse <sgosse@sgi.com>
To: "cygwin@cygwin.com" <cygwin@cygwin.com>
Subject: RE: postinstall script errors (-1073741819 / STATUS_ACCESS_VIOLATION) on default install with Cygwin 2.831 (64bit) on Windows 7 (64bit)
Date: Tue, 25 Feb 2014 21:52:00 -0000 [thread overview]
Message-ID: <8D3FA7645C1CFC4E9E783D22B4C7086473051F5E@P-EXMB2-DC21.corp.sgi.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 3463 bytes --]
Apologies for the spam...forgot to reattach the results of the cygcheck when resending.
-----Original Message-----
From: Shaun Gosse
Sent: Tuesday, February 25, 2014 3:07 PM
To: 'cygwin AT Cygwin DOT com'
Subject: RE: postinstall script errors (-1073741819 / STATUS_ACCESS_VIOLATION) on default install with Cygwin 2.831 (64bit) on Windows 7 (64bit)
My previous send didn't go through apparently; needs address obfuscation, now done.
-----Original Message-----
From: Shaun Gosse
Sent: Tuesday, February 25, 2014 2:00 PM
To: 'cygwin AT cygwin DOT com'
Subject: RE: postinstall script errors (-1073741819 / STATUS_ACCESS_VIOLATION) on default install with Cygwin 2.831 (64bit) on Windows 7 (64bit)
Correct, it was there and I needed to specify full path. Now attached; thanks.
As mentioned, this is a fresh install. The only application from that list is Windows Defender, and it was disabled, machine rebooted, and exact same failure occurred.
I'm new to the list and subscribed with digest, so it will aid me in responding faster if replies are cc'd to me directly.
Thanks,
-Shaun
On Tue, Feb 25, 2014 at 06:25:18PM +0000, Shaun Gosse wrote:
>Oh, and http://cygwin.com/problems.html suggested running cygcheck, but it's not found:
>-sh-4.1$ cygcheck
>-sh: cygcheck: command not found
It's there if you have a shell prompt. You likely just have to specify the complete path.
You definitely have some sort of BLODA that is interfering with Cygwin:
http://cygwin.com/acronyms/#BLODA
-----Original Message-----
From: Shaun Gosse
Sent: Tuesday, February 25, 2014 12:25 PM
To: 'cygwin AT Cygwin DOT com'
Subject: postinstall script errors (-1073741819 / STATUS_ACCESS_VIOLATION) on default install with Cygwin 2.831 (64bit) on Windows 7 (64bit)
Hello,
I'm trying to install Cygwin on a freshly installed and updated Windows 7 Ultimate 64bit. I am using the latest installer from Cygwin.com, 2.831. I have been primarily trying to use the 64bit version, but have also tried the 32bit version with the same results. Per similar issues in archives, I disabled UAC to no avail. There are none of the programs from http://cygwin.com/faq/faq.html#faq.using.bloda installed or enabled, with the exception of Windows Defender, which I have now disabled, and it still fails the same way. Rebooting the machine with it disabled, then I'll delete Cygwin and trying it again to confirm.
Attached the logs. The failure is a postinstall script exit status of "-1073741819", which from https://sourceware.org/ml/cygwin/2012-03/msg00721.html is stated to be the status code "STATUS_ACCESS_VIOLATION". I saw this a few different times on the list, but nothing particularly recent and exactly matching seemed to show up. Apologies if I've missed something relevant on the list or am making some other basic mistake.
But I haven't hit this issue before, and I've installed Cygwin a few times, including on Windows 7. I don't know what exact versions those would have been in comparison, but within a month or two back.
Oh, and http://cygwin.com/problems.html suggested running cygcheck, but it's not found:
-sh-4.1$ cygcheck
-sh: cygcheck: command not found
And I did confirm: after disabling Windows Defender, and rebooting, and removing the Cygwin folder, the default install attempt again failed identically.
Let me know if there's any other information that I should provide.
Thanks,
-Shaun Gosse
[-- Attachment #2: cygcheck.out --]
[-- Type: application/octet-stream, Size: 7315 bytes --]
Cygwin Configuration Diagnostics
Current System Time: Tue Feb 25 13:56:02 2014
Windows 7 Ultimate Ver 6.1 Build 7601 Service Pack 1
Running in Terminal Service session
Path: C:\Windows\system32
C:\Windows
C:\Windows\System32\Wbem
C:\Windows\System32\WindowsPowerShell\v1.0
Output from C:\cygwin64\bin\id.exe
UID: 400(cxfsqa) GID: 401(mkpasswd)
401(mkpasswd)
SysDir: C:\Windows\system32
WinDir: C:\Windows
PWD = '/cygdrive/c/Users/cxfsqa/Desktop'
HOME = '/home/cxfsqa'
HOMEPATH = '\Users\cxfsqa'
APPDATA = 'C:\Users\cxfsqa\AppData\Roaming'
ProgramW6432 = 'C:\Program Files'
TERM = 'xterm'
PROCESSOR_IDENTIFIER = 'Intel64 Family 15 Model 4 Stepping 3, GenuineIntel'
WINDIR = 'C:\Windows'
PUBLIC = 'C:\Users\Public'
USERDOMAIN = 'cxfswin1'
CommonProgramFiles(x86) = 'C:\Program Files (x86)\Common Files'
OS = 'Windows_NT'
ALLUSERSPROFILE = 'C:\ProgramData'
windows_tracing_flags = '3'
windows_tracing_logfile = 'C:\BVTBin\Tests\installpackage\csilogfile.log'
!:: = '::\'
TEMP = '/cygdrive/c/Users/cxfsqa/AppData/Local/Temp'
COMMONPROGRAMFILES = 'C:\Program Files\Common Files'
USERNAME = 'cxfsqa'
PROCESSOR_LEVEL = '15'
ProgramFiles(x86) = 'C:\Program Files (x86)'
PSModulePath = 'C:\Windows\system32\WindowsPowerShell\v1.0\Modules\'
FP_NO_HOST_CHECK = 'NO'
SYSTEMDRIVE = 'C:'
USERPROFILE = 'C:\Users\cxfsqa'
CLIENTNAME = 'LT-SGOSSE'
LOGONSERVER = '\\CXFSWIN1'
CommonProgramW6432 = 'C:\Program Files\Common Files'
PROCESSOR_ARCHITECTURE = 'AMD64'
LOCALAPPDATA = 'C:\Users\cxfsqa\AppData\Local'
ProgramData = 'C:\ProgramData'
SHLVL = '1'
PATHEXT = '.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC'
HOMEDRIVE = 'C:'
COMSPEC = 'C:\Windows\system32\cmd.exe'
TMP = '/cygdrive/c/Users/cxfsqa/AppData/Local/Temp'
SYSTEMROOT = 'C:\Windows'
PROCESSOR_REVISION = '0403'
PROGRAMFILES = 'C:\Program Files'
NUMBER_OF_PROCESSORS = '4'
SESSIONNAME = 'RDP-Tcp#0'
COMPUTERNAME = 'CXFSWIN1'
_ = '/cygdrive/c/cygwin64/bin/cygcheck.exe'
HKEY_CURRENT_USER\Software\Cygwin
HKEY_CURRENT_USER\Software\Cygwin\Installations
(default) = '\??\C:\cygwin'
e022582115c10879 = '\??\C:\cygwin64'
HKEY_CURRENT_USER\Software\Cygwin\Program Options
HKEY_CURRENT_USER\Software\Cygwin\setup
HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin
HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\Installations
(default) = '\??\C:\cygwin64'
HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\Program Options
HKEY_LOCAL_MACHINE\SOFTWARE\Cygwin\setup
(default) = 'C:\cygwin64'
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Cygwin
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Cygwin\Installations
(default) = '\??\C:\cygwin'
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Cygwin\Program Options
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Cygwin\setup
(default) = 'C:\cygwin'
obcaseinsensitive set to 1
Cygwin installations found in the registry:
System: Key: e022582115c10879 Path: C:\cygwin64
User: Key: c5e39b7a9d22bafb Path: C:\cygwin (ORPHANED)
User: Key: e022582115c10879 Path: C:\cygwin64
a: fd N/A N/A
c: hd NTFS 194890Mb 21% CP CS UN PA FC
d: hd NTFS 20002Mb 68% CP CS UN PA FC WindowsXPsp1i386
e: hd NTFS 40005Mb 28% CP CS UN PA FC WIndows2003r2sp2x64
f: hd NTFS 31259Mb 60% CP CS UN PA FC Windows2003R2x64
g: cd N/A N/A
h: hd N/A N/A
i: hd N/A N/A
j: hd N/A N/A
k: hd N/A N/A
l: hd N/A N/A
m: hd NTFS 13268Mb 1% CP CS UN PA FC external
n: hd N/A N/A
o: hd N/A N/A
p: hd N/A N/A
q: hd N/A N/A
r: hd N/A N/A
s: hd N/A N/A
t: hd N/A N/A
u: hd N/A N/A
v: hd N/A N/A
w: hd N/A N/A
x: hd N/A N/A
y: hd N/A N/A
z: hd N/A N/A
C:\cygwin64 / system binary,auto
C:\cygwin64\bin /usr/bin system binary,auto
C:\cygwin64\lib /usr/lib system binary,auto
cygdrive prefix /cygdrive user binary,auto
Not Found: awk
Not Found: bash
Not Found: cat
Not Found: cp
Not Found: cpp (good!)
Not Found: crontab
Found: C:\Windows\system32\find.exe
Not Found: gcc
Not Found: gdb
Not Found: grep
Not Found: kill
Not Found: ld
Not Found: ls
Not Found: make
Not Found: mv
Not Found: patch
Not Found: perl
Not Found: rm
Not Found: sed
Not Found: ssh
Not Found: sh
Not Found: tar
Not Found: test
Not Found: vi
Not Found: vim
Warning: cygwin1.dll not found on your path
Can't find the cygrunsrv utility, skipping services check.
Cygwin Package Information
Last downloaded files to: C:\Users\cxfsqa\Downloads
Last downloaded files from: http://mirrors.163.com/cygwin/
Package Version Status
alternatives 1.3.30c-10 OK
base-cygwin 3.3-1 OK
base-files 4.1-1 OK
bash 4.1.11-2 OK
bzip2 1.0.6-2 OK
coreutils 8.15-3 OK
cygutils 1.4.14-1 OK
cygwin 1.7.28-2 OK
dash 0.5.7-4 OK
editrights 1.02-1 OK
file 5.13-1 OK
findutils 4.5.11-1 OK
gawk 4.1.0-1 OK
getent 2.18.90-1 OK
grep 2.16-1 OK
groff 1.22.2-2 OK
gzip 1.4-1 OK
hostname 3.13-1 OK
ipc-utils 1.0-2 OK
less 458-1 OK
libargp 20110921-2 OK
libattr1 2.4.46-1 OK
libbz2_1 1.0.6-2 OK
libgcc1 4.8.2-3 OK
libgmp10 5.1.3-1 OK
libiconv2 1.14-1 OK
libintl8 0.18.1.1-3 OK
liblzma5 5.0.4-1 OK
libmpfr4 3.1.2-1 OK
libncursesw10 5.9-4 OK
libpcre1 8.33-1 OK
Empty package libpopt0
libpopt0 1.16-1 OK
libreadline7 6.2-1 OK
libstdc++6 4.8.2-3 OK
login 1.10-10 OK
man 1.6g-2 OK
mintty 1.2-beta1-1 OK
popt 1.16-1 OK
rebase 4.4.1-1 OK
run 1.3.0-1 OK
sed 4.2.2-3 OK
tar 1.26-1 OK
terminfo 5.9-4 OK
tzcode 2013c-1 OK
vim-minimal 7.4.182-1 OK
which 2.20-2 OK
xz 5.0.4-1 OK
zlib0 1.2.8-1 OK
Use -h to see help about each section
[-- Attachment #3: Type: text/plain, Size: 218 bytes --]
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
next reply other threads:[~2014-02-25 21:08 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-25 21:52 Shaun Gosse [this message]
-- strict thread matches above, loose matches on Subject: below --
2014-02-25 21:08 Shaun Gosse
2014-02-25 18:43 Shaun Gosse
2014-02-25 18:50 ` Christopher Faylor
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8D3FA7645C1CFC4E9E783D22B4C7086473051F5E@P-EXMB2-DC21.corp.sgi.com \
--to=sgosse@sgi.com \
--cc=cygwin@cygwin.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).