* Emacs doesn't start from icon after update to 1.7.25
@ 2013-09-20 23:36 KARR, DAVID
2013-09-21 8:18 ` Ken Brown
0 siblings, 1 reply; 12+ messages in thread
From: KARR, DAVID @ 2013-09-20 23:36 UTC (permalink / raw)
To: cygwin
Today I updated 1.7.25. I was a handful of minor releases behind at the time.
After the update, I can't start Emacs from the icon anymore. The shortcut command I have for it is the following:
C:\Cygwin\bin\run.exe -p /usr/bin bash -l -i -c "emacs -display 127.0.0.1:0.0 --debug-init"
When I run this, I see a window flash and disappear very quickly, and that's all I see. I can't find any meaningful log information.
If I instead open up rxvt and execute "emacs", it starts up fine.
I did check the FAQ before writing this, but I didn't see anything obvious.
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Emacs doesn't start from icon after update to 1.7.25
2013-09-20 23:36 Emacs doesn't start from icon after update to 1.7.25 KARR, DAVID
@ 2013-09-21 8:18 ` Ken Brown
2013-09-22 1:00 ` KARR, DAVID
[not found] ` <B8D164BED956C5439875951895CB4B2211449D8D@WABOTH9MSGUSR8C.ITServices.sbc.com>
0 siblings, 2 replies; 12+ messages in thread
From: Ken Brown @ 2013-09-21 8:18 UTC (permalink / raw)
To: cygwin
On 9/20/2013 7:26 PM, KARR, DAVID wrote:
> Today I updated 1.7.25. I was a handful of minor releases behind at the time.
>
> After the update, I can't start Emacs from the icon anymore. The shortcut command I have for it is the following:
>
> C:\Cygwin\bin\run.exe -p /usr/bin bash -l -i -c "emacs -display 127.0.0.1:0.0 --debug-init"
I don't think this has anything to do with emacs. There have been
several reports of problems with run-1.3.0-1. Try downgrading to the
previous version of run, or switch to run2.
Ken
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: Emacs doesn't start from icon after update to 1.7.25
2013-09-21 8:18 ` Ken Brown
@ 2013-09-22 1:00 ` KARR, DAVID
[not found] ` <B8D164BED956C5439875951895CB4B2211449D8D@WABOTH9MSGUSR8C.ITServices.sbc.com>
1 sibling, 0 replies; 12+ messages in thread
From: KARR, DAVID @ 2013-09-22 1:00 UTC (permalink / raw)
To: Ken Brown, cygwin
> -----Original Message-----
> Sent: Friday, September 20, 2013 7:00 PM
> Subject: Re: Emacs doesn't start from icon after update to 1.7.25
>
> On 9/20/2013 7:26 PM, KARR, DAVID wrote:
> > Today I updated 1.7.25. I was a handful of minor releases behind at the
> time.
> >
> > After the update, I can't start Emacs from the icon anymore. The shortcut
> command I have for it is the following:
> >
> > C:\Cygwin\bin\run.exe -p /usr/bin bash -l -i -c "emacs -display
> 127.0.0.1:0.0 --debug-init"
>
> I don't think this has anything to do with emacs. There have been
> several reports of problems with run-1.3.0-1. Try downgrading to the
> previous version of run, or switch to run2.
I first tried just changing the command line to "run2". No change. I then downgraded "run" to the previous version and changed it back to "run". It now works as before. Are there any diagnostics that would be useful to anyone?
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Emacs doesn't start from icon after update to 1.7.25
[not found] ` <B8D164BED956C5439875951895CB4B2211449D8D@WABOTH9MSGUSR8C.ITServices.sbc.com>
@ 2013-09-22 15:56 ` Ken Brown
[not found] ` <B8D164BED956C5439875951895CB4B221145859C@WABOTH9MSGUSR8C.ITServices.sbc.com>
0 siblings, 1 reply; 12+ messages in thread
From: Ken Brown @ 2013-09-22 15:56 UTC (permalink / raw)
To: cygwin
On 9/21/2013 8:42 PM, KARR, DAVID wrote:
>> -----Original Message-----
>> From: On Behalf Of
>> Ken Brown
>> On 9/20/2013 7:26 PM, KARR, DAVID wrote:
>>> Today I updated 1.7.25. I was a handful of minor releases behind at the
>> time.
>>>
>>> After the update, I can't start Emacs from the icon anymore. The shortcut
>> command I have for it is the following:
>>>
>>> C:\Cygwin\bin\run.exe -p /usr/bin bash -l -i -c "emacs -display
>> 127.0.0.1:0.0 --debug-init"
>>
>> I don't think this has anything to do with emacs. There have been
>> several reports of problems with run-1.3.0-1. Try downgrading to the
>> previous version of run, or switch to run2.
>
> I first tried just changing the command line to "run2". No change.
run2 is not a drop-in replacement for run. If you want to use it, you
have to install the run2 package and read the documentation. Or you
could run the script /usr/bin/make-emacs-shortcut, which creates a
shortcut that uses run2.
Ken
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Emacs doesn't start from icon after update to 1.7.25
[not found] ` <B8D164BED956C5439875951895CB4B221145859C@WABOTH9MSGUSR8C.ITServices.sbc.com>
@ 2013-09-22 21:31 ` Ken Brown
[not found] ` <B8D164BED956C5439875951895CB4B221145A879@WABOTH9MSGUSR8C.ITServices.sbc.com>
0 siblings, 1 reply; 12+ messages in thread
From: Ken Brown @ 2013-09-22 21:31 UTC (permalink / raw)
To: cygwin
On 9/22/2013 2:06 PM, KARR, DAVID wrote:
>> -----Original Message-----
>> From: On Behalf Of
>> Ken Brown
>> Sent: Sunday, September 22, 2013 6:10 AM
>> To: cygwin
>> Subject: Re: Emacs doesn't start from icon after update to 1.7.25
>>
>> On 9/21/2013 8:42 PM, KARR, DAVID wrote:
>>>> -----Original Message-----
>>>> From: On Behalf Of
>>>> Ken Brown
>>>> On 9/20/2013 7:26 PM, KARR, DAVID wrote:
>>>>> Today I updated 1.7.25. I was a handful of minor releases behind at the
>>>> time.
>>>>>
>>>>> After the update, I can't start Emacs from the icon anymore. The
>> shortcut
>>>> command I have for it is the following:
>>>>>
>>>>> C:\Cygwin\bin\run.exe -p /usr/bin bash -l -i -c "emacs -display
>>>> 127.0.0.1:0.0 --debug-init"
>>>>
>>>> I don't think this has anything to do with emacs. There have been
>>>> several reports of problems with run-1.3.0-1. Try downgrading to the
>>>> previous version of run, or switch to run2.
>>>
>>> I first tried just changing the command line to "run2". No change.
>>
>> run2 is not a drop-in replacement for run. If you want to use it, you
>> have to install the run2 package and read the documentation. Or you
>> could run the script /usr/bin/make-emacs-shortcut, which creates a
>> shortcut that uses run2.
>
> I already had run2 installed. I ran "make-emacs-shortcut". I moved the resulting shortcut to the desktop, giving it a new name. I double-clicked it. Nothing happened. I than created a cmd window and pasted in the command line from the shortcut and ran it. Nothing. I then pasted in the command line from the old shortcut, and Emacs came up.
I'd like to find out what went wrong with the shortcut created by
make-emacs-shortcut. What's the target? And what are the contents of
the emacs.xml file that it uses?
Ken
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Emacs doesn't start from icon after update to 1.7.25
[not found] ` <B8D164BED956C5439875951895CB4B221145A879@WABOTH9MSGUSR8C.ITServices.sbc.com>
@ 2013-09-23 13:16 ` Ken Brown
[not found] ` <B8D164BED956C5439875951895CB4B2211466D4F@WABOTH9MSGUSR8C.ITServices.sbc.com>
0 siblings, 1 reply; 12+ messages in thread
From: Ken Brown @ 2013-09-23 13:16 UTC (permalink / raw)
To: cygwin
On 9/22/2013 5:38 PM, KARR, DAVID wrote:
>> -----Original Message-----
>> From:
>> Ken Brown
>> Sent: Sunday, September 22, 2013 1:13 PM
>> On 9/22/2013 2:06 PM, KARR, DAVID wrote:
>>>> -----Original Message-----
>>>> From: On Behalf Of
>>>> Ken Brown
>>>> On 9/21/2013 8:42 PM, KARR, DAVID wrote:
>>>>>> -----Original Message-----
>>>>>> From: On Behalf Of
>>>>>> Ken Brown
>>>>>> On 9/20/2013 7:26 PM, KARR, DAVID wrote:
>>>>>>> Today I updated 1.7.25. I was a handful of minor releases behind at
>> the
>>>>>> time.
>>>>>>>
>>>>>>> After the update, I can't start Emacs from the icon anymore. The
>>>> shortcut
>>>>>> command I have for it is the following:
>>>>>>>
>>>>>>> C:\Cygwin\bin\run.exe -p /usr/bin bash -l -i -c "emacs -display
>>>>>> 127.0.0.1:0.0 --debug-init"
>>>>>>
>>>>>> I don't think this has anything to do with emacs. There have been
>>>>>> several reports of problems with run-1.3.0-1. Try downgrading to the
>>>>>> previous version of run, or switch to run2.
>>>>>
>>>>> I first tried just changing the command line to "run2". No change.
>>>>
>>>> run2 is not a drop-in replacement for run. If you want to use it, you
>>>> have to install the run2 package and read the documentation. Or you
>>>> could run the script /usr/bin/make-emacs-shortcut, which creates a
>>>> shortcut that uses run2.
>>>
>>> I already had run2 installed. I ran "make-emacs-shortcut". I moved the
>> resulting shortcut to the desktop, giving it a new name. I double-clicked
>> it. Nothing happened. I than created a cmd window and pasted in the command
>> line from the shortcut and ran it. Nothing. I then pasted in the command
>> line from the old shortcut, and Emacs came up.
>>
>> I'd like to find out what went wrong with the shortcut created by
>> make-emacs-shortcut. What's the target? And what are the contents of
>> the emacs.xml file that it uses?
>
> Target: C:\Cygwin\bin\run2.exe --display 127.0.0.1:0.0 /usr/local/bin/emacs.xml
>
> /usr/local/bin/emacs.xml:
> ------------------
> <?xml version="1.0" encoding="us-ascii"?>
> <Run2Config
> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
> xsi:noNamespaceSchemaLocation="run2.xsd">
> <SelfOptions />
> <Global>
> <Environment />
> </Global>
> <GDI>
> <Environment />
> <Target filename="/usr/bin/bash.exe" startin="~">
> <Arg>-l</Arg>
> <Arg>-c /usr/bin/emacs-w32.exe</Arg>
> </Target>
> </GDI>
> <X11>
> <Environment>
> <Set var="DISPLAY" value="127.0.0.1:0.0"/>
> </Environment>
> <Target filename="/usr/bin/bash.exe" startin="~">
> <Arg>-l</Arg>
> <Arg>-c emacs</Arg>
> </Target>
> </X11>
> </Run2Config>
> -----------------
This looks right, and it works fine for me on both 32-bit and 64-bit
Cygwin. I don't know why it doesn't work for you. Does 'cygcheck
/usr/bin/run2.exe' show anything unexpected? What about 'run2 --help'
(in a Cygwin bash shell)?
Ken
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Emacs doesn't start from icon after update to 1.7.25 [attn: Chuck]
[not found] ` <B8D164BED956C5439875951895CB4B2211466D4F@WABOTH9MSGUSR8C.ITServices.sbc.com>
@ 2013-09-23 15:05 ` Ken Brown
2013-09-25 19:25 ` KARR, DAVID
0 siblings, 1 reply; 12+ messages in thread
From: Ken Brown @ 2013-09-23 15:05 UTC (permalink / raw)
To: cygwin
On 9/23/2013 9:56 AM, KARR, DAVID wrote:
>> -----Original Message-----
>> From:
>> Ken Brown
>> Sent: Monday, September 23, 2013 4:50 AM
>> On 9/22/2013 5:38 PM, KARR, DAVID wrote:
>>>> -----Original Message-----
>>>> From:
>>>> Ken Brown
>>>> Sent: Sunday, September 22, 2013 1:13 PM
>>>> On 9/22/2013 2:06 PM, KARR, DAVID wrote:
>>>>>> -----Original Message-----
>>>>>> From: On Behalf Of
>>>>>> Ken Brown
>>>>>> On 9/21/2013 8:42 PM, KARR, DAVID wrote:
>>>>>>>> -----Original Message-----
>>>>>>>> From: On Behalf Of
>>>>>>>> Ken Brown
>>>>>>>> On 9/20/2013 7:26 PM, KARR, DAVID wrote:
>>>>>>>>> Today I updated 1.7.25. I was a handful of minor releases behind at
>>>> the
>>>>>>>> time.
>>>>>>>>>
>>>>>>>>> After the update, I can't start Emacs from the icon anymore. The
>>>>>> shortcut
>>>>>>>> command I have for it is the following:
>>>>>>>>>
>>>>>>>>> C:\Cygwin\bin\run.exe -p /usr/bin bash -l -i -c "emacs -
>> display
>>>>>>>> 127.0.0.1:0.0 --debug-init"
>>>>>>>>
>>>>>>>> I don't think this has anything to do with emacs. There have been
>>>>>>>> several reports of problems with run-1.3.0-1. Try downgrading to the
>>>>>>>> previous version of run, or switch to run2.
>>>>>>>
>>>>>>> I first tried just changing the command line to "run2". No change.
>>>>>>
>>>>>> run2 is not a drop-in replacement for run. If you want to use it, you
>>>>>> have to install the run2 package and read the documentation. Or you
>>>>>> could run the script /usr/bin/make-emacs-shortcut, which creates a
>>>>>> shortcut that uses run2.
>>>>>
>>>>> I already had run2 installed. I ran "make-emacs-shortcut". I moved the
>>>> resulting shortcut to the desktop, giving it a new name. I double-clicked
>>>> it. Nothing happened. I than created a cmd window and pasted in the
>> command
>>>> line from the shortcut and ran it. Nothing. I then pasted in the command
>>>> line from the old shortcut, and Emacs came up.
>>>>
>>>> I'd like to find out what went wrong with the shortcut created by
>>>> make-emacs-shortcut. What's the target? And what are the contents of
>>>> the emacs.xml file that it uses?
>>>
>>> Target: C:\Cygwin\bin\run2.exe --display 127.0.0.1:0.0
>> /usr/local/bin/emacs.xml
>>>
>>> /usr/local/bin/emacs.xml:
>>> ------------------
>>> <?xml version="1.0" encoding="us-ascii"?>
>>> <Run2Config
>>> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
>>> xsi:noNamespaceSchemaLocation="run2.xsd">
>>> <SelfOptions />
>>> <Global>
>>> <Environment />
>>> </Global>
>>> <GDI>
>>> <Environment />
>>> <Target filename="/usr/bin/bash.exe" startin="~">
>>> <Arg>-l</Arg>
>>> <Arg>-c /usr/bin/emacs-w32.exe</Arg>
>>> </Target>
>>> </GDI>
>>> <X11>
>>> <Environment>
>>> <Set var="DISPLAY" value="127.0.0.1:0.0"/>
>>> </Environment>
>>> <Target filename="/usr/bin/bash.exe" startin="~">
>>> <Arg>-l</Arg>
>>> <Arg>-c emacs</Arg>
>>> </Target>
>>> </X11>
>>> </Run2Config>
>>> -----------------
>>
>> This looks right, and it works fine for me on both 32-bit and 64-bit
>> Cygwin. I don't know why it doesn't work for you. Does 'cygcheck
>> /usr/bin/run2.exe' show anything unexpected? What about 'run2 --help'
>> (in a Cygwin bash shell)?
>
> % cygcheck /usr/bin/run2.exe
> C:\Cygwin\bin\run2.exe
> C:\Cygwin\bin\cygwin1.dll
[...]
> % run2 --help
> Usage: run2 [OPTIONS] xmlfile
[...]
Looks fine. I'm out of ideas. Maybe Chuck (the run and run2
maintainer) can help you if you want to pursue this.
Ken
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: Emacs doesn't start from icon after update to 1.7.25 [attn: Chuck]
2013-09-23 15:05 ` Emacs doesn't start from icon after update to 1.7.25 [attn: Chuck] Ken Brown
@ 2013-09-25 19:25 ` KARR, DAVID
2013-09-25 19:45 ` Charles Wilson
0 siblings, 1 reply; 12+ messages in thread
From: KARR, DAVID @ 2013-09-25 19:25 UTC (permalink / raw)
To: Ken Brown, cygwin
[-- Attachment #1: Type: text/plain, Size: 4666 bytes --]
> -----Original Message-----
> Sent: Monday, September 23, 2013 7:51 AM
> To: cygwin
> Subject: Re: Emacs doesn't start from icon after update to 1.7.25 [attn:
> Chuck]
>
> On 9/23/2013 9:56 AM, KARR, DAVID wrote:
> >> -----Original Message-----
> >> From:
> >> Ken Brown
> >> Sent: Monday, September 23, 2013 4:50 AM
> >> On 9/22/2013 5:38 PM, KARR, DAVID wrote:
> >>>> -----Original Message-----
> >>>> From:
> >>>> Ken Brown
> >>>> Sent: Sunday, September 22, 2013 1:13 PM
> >>>> On 9/22/2013 2:06 PM, KARR, DAVID wrote:
> >>>>>> -----Original Message-----
> >>>>>> From: On Behalf Of
> >>>>>> Ken Brown
> >>>>>> On 9/21/2013 8:42 PM, KARR, DAVID wrote:
> >>>>>>>> -----Original Message-----
> >>>>>>>> From: On Behalf Of
> >>>>>>>> Ken Brown
> >>>>>>>> On 9/20/2013 7:26 PM, KARR, DAVID wrote:
> >>>>>>>>> Today I updated 1.7.25. I was a handful of minor releases behind
> at
> >>>> the
> >>>>>>>> time.
> >>>>>>>>>
> >>>>>>>>> After the update, I can't start Emacs from the icon anymore. The
> >>>>>> shortcut
> >>>>>>>> command I have for it is the following:
> >>>>>>>>>
> >>>>>>>>> C:\Cygwin\bin\run.exe -p /usr/bin bash -l -i -c "emacs -
> >> display
> >>>>>>>> 127.0.0.1:0.0 --debug-init"
> >>>>>>>>
> >>>>>>>> I don't think this has anything to do with emacs. There have been
> >>>>>>>> several reports of problems with run-1.3.0-1. Try downgrading to
> the
> >>>>>>>> previous version of run, or switch to run2.
> >>>>>>>
> >>>>>>> I first tried just changing the command line to "run2". No change.
> >>>>>>
> >>>>>> run2 is not a drop-in replacement for run. If you want to use it, you
> >>>>>> have to install the run2 package and read the documentation. Or you
> >>>>>> could run the script /usr/bin/make-emacs-shortcut, which creates a
> >>>>>> shortcut that uses run2.
> >>>>>
> >>>>> I already had run2 installed. I ran "make-emacs-shortcut". I moved
> the
> >>>> resulting shortcut to the desktop, giving it a new name. I double-
> clicked
> >>>> it. Nothing happened. I than created a cmd window and pasted in the
> >> command
> >>>> line from the shortcut and ran it. Nothing. I then pasted in the
> command
> >>>> line from the old shortcut, and Emacs came up.
> >>>>
> >>>> I'd like to find out what went wrong with the shortcut created by
> >>>> make-emacs-shortcut. What's the target? And what are the contents of
> >>>> the emacs.xml file that it uses?
> >>>
> >>> Target: C:\Cygwin\bin\run2.exe --display 127.0.0.1:0.0
> >> /usr/local/bin/emacs.xml
> >>>
> >>> /usr/local/bin/emacs.xml:
> >>> ------------------
> >>> <?xml version="1.0" encoding="us-ascii"?>
> >>> <Run2Config
> >>> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
> >>> xsi:noNamespaceSchemaLocation="run2.xsd">
> >>> <SelfOptions />
> >>> <Global>
> >>> <Environment />
> >>> </Global>
> >>> <GDI>
> >>> <Environment />
> >>> <Target filename="/usr/bin/bash.exe" startin="~">
> >>> <Arg>-l</Arg>
> >>> <Arg>-c /usr/bin/emacs-w32.exe</Arg>
> >>> </Target>
> >>> </GDI>
> >>> <X11>
> >>> <Environment>
> >>> <Set var="DISPLAY" value="127.0.0.1:0.0"/>
> >>> </Environment>
> >>> <Target filename="/usr/bin/bash.exe" startin="~">
> >>> <Arg>-l</Arg>
> >>> <Arg>-c emacs</Arg>
> >>> </Target>
> >>> </X11>
> >>> </Run2Config>
> >>> -----------------
> >>
> >> This looks right, and it works fine for me on both 32-bit and 64-bit
> >> Cygwin. I don't know why it doesn't work for you. Does 'cygcheck
> >> /usr/bin/run2.exe' show anything unexpected? What about 'run2 --help'
> >> (in a Cygwin bash shell)?
> >
> > % cygcheck /usr/bin/run2.exe
> > C:\Cygwin\bin\run2.exe
> > C:\Cygwin\bin\cygwin1.dll
>
> [...]
>
> > % run2 --help
> > Usage: run2 [OPTIONS] xmlfile
>
> [...]
>
> Looks fine. I'm out of ideas. Maybe Chuck (the run and run2
> maintainer) can help you if you want to pursue this.
Anyone else (Chuck?) have any ideas on this? As I can't open Emacs from the shortcut anymore, my current workaround is opening an rxvt window and running emacs from there.
If it matters, I tried taking my shortcut's command line and altering it like this:
c:\cygwin\bin\strace.exe -f C:\Cygwin\bin\run.exe -p /usr/bin bash -l -i -c "emacs -display 127.0.0.1:0.0 --debug-init" > strace.log
I'm attaching that strace.log file. I looked at it, and I didn't see anything obvious. I still chuckle over the reference to "/home/corinna", but I'm pretty sure that has nothing to do with this.
[-- Attachment #2: strace.log --]
[-- Type: application/octet-stream, Size: 88588 bytes --]
3 3 [main] run (14276) **********************************************
276 279 [main] run (14276) Program name: C:\Cygwin\bin\run.exe (windows pid 14276)
123 402 [main] run (14276) OS version: Windows NT-6.1
162 564 [main] run (14276) **********************************************
269 833 [main] run (14276) sigprocmask: 0 = sigprocmask (0, 0x6126D7A8, 0x0)
762 1595 [main] run 14276 open_shared: name shared.5, n 5, shared 0x60FF0000 (wanted 0x60FF0000), h 0x64, *m 6
154 1749 [main] run 14276 user_heap_info::init: heap base 0x20000000, heap top 0x20000000, heap size 0x18000000 (402653184)
174 1923 [main] run 14276 open_shared: name S-1-5-21-2057499049-1289676208-1959431660-1944941.1, n 1, shared 0x60FE0000 (wanted 0x60FE0000), h 0x60, *m 6
212 2135 [main] run 14276 user_info::create: opening user shared for 'S-1-5-21-2057499049-1289676208-1959431660-1944941' at 0x60FE0000
99 2234 [main] run 14276 user_info::create: user shared version AB1FCCE8
155 2389 [main] run 14276 fhandler_pipe::create: name \\.\pipe\cygwin-c5e39b7a9d22bafb-14276-sigwait, size 164, mode PIPE_TYPE_MESSAGE
163 2552 [main] run 14276 fhandler_pipe::create: pipe read handle 0x78
86 2638 [main] run 14276 fhandler_pipe::create: CreateFile: name \\.\pipe\cygwin-c5e39b7a9d22bafb-14276-sigwait
136 2774 [main] run 14276 fhandler_pipe::create: pipe write handle 0x80
118 2892 [main] run 14276 dll_crt0_0: finished dll_crt0_0 initialization
8193 11085 [sig] run 14276 wait_sig: entering ReadFile loop, my_readsig 0x78, my_sendsig 0x80
540 11625 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Users\dk068x, no-keep-rel, no-add-slash)
172 11797 [main] run 14276 normalize_win32_path: C:\Users\dk068x = normalize_win32_path (C:\Users\dk068x)
106 11903 [main] run 14276 mount_info::conv_to_posix_path: /c/Users/dk068x = conv_to_posix_path (C:\Users\dk068x)
188 12091 [main] run 14276 sigprocmask: 0 = sigprocmask (0, 0x200180A8, 0x0)
349 12440 [main] run 14276 _cygwin_istext_for_stdio: fd 0: not open
6086 18526 [main] run 14276 _cygwin_istext_for_stdio: fd 1: not open
109 18635 [main] run 14276 _cygwin_istext_for_stdio: fd 2: not open
302 18937 [main] run (14276) open_shared: name cygpid.14276, n 14276, shared 0x60FD0000 (wanted 0x60FD0000), h 0xDC, *m 2
133 19070 [main] run 14276 pinfo::thisproc: myself dwProcessId 14276
112 19182 [main] run 14276 time: 1380133771 = time(0x0)
1643 20825 [main] run 14276 environ_init: GetEnvironmentStrings returned 0x507B60
179 21004 [main] run 14276 environ_init: 0x20028290: %FavoritesDir%=C:\Users\dk068x\Favorites
152 21156 [main] run 14276 environ_init: 0x200282C0: !::=::\
148 21304 [main] run 14276 environ_init: 0x200282D0: !C:=C:\Users\dk068x
164 21468 [main] run 14276 environ_init: 0x200282F0: ALLUSERSPROFILE=C:\ProgramData
140 21608 [main] run 14276 environ_init: 0x20028318: APPDATA=C:\Users\dk068x\AppData\Roaming
121 21729 [main] run 14276 environ_init: 0x20028348: COMMONPROGRAMFILES=C:\Program Files\Common Files
117 21846 [main] run 14276 environ_init: 0x20028380: COMPUTERNAME=WACDTL04DK068X
142 21988 [main] run 14276 environ_init: 0x200283A8: COMSPEC=C:\Windows\system32\cmd.exe
139 22127 [main] run 14276 parse_options: glob (called func)
105 22232 [main] run 14276 parse_options: returning
64 22296 [main] run 14276 environ_init: 0x200283D8: CYGWIN=noglob
78 22374 [main] run 14276 environ_init: 0x20028400: DEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
75 22449 [main] run 14276 environ_init: 0x20028438: DRU_APP_DIR=%programfiles%\DRU
75 22524 [main] run 14276 environ_init: 0x20028460: DRU_BIN_DIR=%programfiles%\DRU\BIN
73 22597 [main] run 14276 environ_init: 0x20028488: FP_NO_HOST_CHECK=NO
75 22672 [main] run 14276 environ_init: 0x200284A8: GROOVY_HOME=C:\eclipse\Groovy\Groovy-2.1.7
76 22748 [main] run 14276 environ_init: 0x200284D8: HOMEDRIVE=H:
75 22823 [main] run 14276 environ_init: 0x200284F0: HOMEPATH=\
273 23096 [main] run 14276 environ_init: 0x20028500: HOMESHARE=\\bfpm10n2.edc.cingular.net\users1\dk068x
118 23214 [main] run 14276 environ_init: 0x20028540: JAVA_HOME=c:\eclipse\Java\jdk1.6.0_30
77 23291 [main] run 14276 environ_init: 0x20028570: LOCALAPPDATA=C:\Users\dk068x\AppData\Local
72 23363 [main] run 14276 environ_init: 0x200285A0: LOGONSERVER=\\WABOTH9ADSSRV36
73 23436 [main] run 14276 environ_init: 0x200285C8: M2_HOME=c:\Users\dk068x\frameworks\apache-maven-3.0.5
73 23509 [main] run 14276 environ_init: 0x20028608: NUMBER_OF_PROCESSORS=8
73 23582 [main] run 14276 environ_init: 0x20028628: OS=Windows_NT
104 23686 [main] run 14276 getwinenv: can't set native for PATH= since no environ yet
93 23779 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Program Files\Voltage Security\Voltage SecureFile, keep-rel, no-add-slash)
50 23829 [main] run 14276 normalize_win32_path: C:\Program Files\Voltage Security\Voltage SecureFile = normalize_win32_path (C:\Program Files\Voltage Security\Voltage SecureFile)
57 23886 [main] run 14276 mount_info::conv_to_posix_path: /c/Program Files/Voltage Security/Voltage SecureFile = conv_to_posix_path (C:\Program Files\Voltage Security\Voltage SecureFile)
104 23990 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Program Files\CollabNet\Subversion Client, keep-rel, no-add-slash)
59 24049 [main] run 14276 normalize_win32_path: C:\Program Files\CollabNet\Subversion Client = normalize_win32_path (C:\Program Files\CollabNet\Subversion Client)
52 24101 [main] run 14276 mount_info::conv_to_posix_path: /c/Program Files/CollabNet/Subversion Client = conv_to_posix_path (C:\Program Files\CollabNet\Subversion Client)
51 24152 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Program Files\RSA SecurID Token Common, keep-rel, no-add-slash)
49 24201 [main] run 14276 normalize_win32_path: C:\Program Files\RSA SecurID Token Common = normalize_win32_path (C:\Program Files\RSA SecurID Token Common)
49 24250 [main] run 14276 mount_info::conv_to_posix_path: /c/Program Files/RSA SecurID Token Common = conv_to_posix_path (C:\Program Files\RSA SecurID Token Common)
49 24299 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Windows\system32, keep-rel, no-add-slash)
47 24346 [main] run 14276 normalize_win32_path: C:\Windows\system32 = normalize_win32_path (C:\Windows\system32)
48 24394 [main] run 14276 mount_info::conv_to_posix_path: /c/Windows/system32 = conv_to_posix_path (C:\Windows\system32)
48 24442 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Windows, keep-rel, no-add-slash)
48 24490 [main] run 14276 normalize_win32_path: C:\Windows = normalize_win32_path (C:\Windows)
54 24544 [main] run 14276 mount_info::conv_to_posix_path: /c/Windows = conv_to_posix_path (C:\Windows)
48 24592 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Windows\System32\Wbem, keep-rel, no-add-slash)
48 24640 [main] run 14276 normalize_win32_path: C:\Windows\System32\Wbem = normalize_win32_path (C:\Windows\System32\Wbem)
48 24688 [main] run 14276 mount_info::conv_to_posix_path: /c/Windows/System32/Wbem = conv_to_posix_path (C:\Windows\System32\Wbem)
47 24735 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Windows\System32\WindowsPowerShell\v1.0, keep-rel, no-add-slash)
48 24783 [main] run 14276 normalize_win32_path: C:\Windows\System32\WindowsPowerShell\v1.0 = normalize_win32_path (C:\Windows\System32\WindowsPowerShell\v1.0)
48 24831 [main] run 14276 mount_info::conv_to_posix_path: /c/Windows/System32/WindowsPowerShell/v1.0 = conv_to_posix_path (C:\Windows\System32\WindowsPowerShell\v1.0)
74 24905 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Program Files\Enterprise Vault\EVClient, keep-rel, no-add-slash)
82 24987 [main] run 14276 normalize_win32_path: C:\Program Files\Enterprise Vault\EVClient = normalize_win32_path (C:\Program Files\Enterprise Vault\EVClient)
126 25113 [main] run 14276 mount_info::conv_to_posix_path: /c/Program Files/Enterprise Vault/EVClient = conv_to_posix_path (C:\Program Files\Enterprise Vault\EVClient)
46 25159 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Program Files\Code Collaborator Client, keep-rel, no-add-slash)
47 25206 [main] run 14276 normalize_win32_path: C:\Program Files\Code Collaborator Client = normalize_win32_path (C:\Program Files\Code Collaborator Client)
40 25246 [main] run 14276 mount_info::conv_to_posix_path: /c/Program Files/Code Collaborator Client = conv_to_posix_path (C:\Program Files\Code Collaborator Client)
34 25280 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Program Files\nodejs, keep-rel, no-add-slash)
33 25313 [main] run 14276 normalize_win32_path: C:\Program Files\nodejs = normalize_win32_path (C:\Program Files\nodejs)
32 25345 [main] run 14276 mount_info::conv_to_posix_path: /c/Program Files/nodejs = conv_to_posix_path (C:\Program Files\nodejs)
32 25377 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Program Files\Voltage Security\Voltage SecureMail, keep-rel, no-add-slash)
32 25409 [main] run 14276 normalize_win32_path: C:\Program Files\Voltage Security\Voltage SecureMail = normalize_win32_path (C:\Program Files\Voltage Security\Voltage SecureMail)
33 25442 [main] run 14276 mount_info::conv_to_posix_path: /c/Program Files/Voltage Security/Voltage SecureMail = conv_to_posix_path (C:\Program Files\Voltage Security\Voltage SecureMail)
33 25475 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Program Files\Common Files\Voltage Security, keep-rel, no-add-slash)
31 25506 [main] run 14276 normalize_win32_path: C:\Program Files\Common Files\Voltage Security = normalize_win32_path (C:\Program Files\Common Files\Voltage Security)
33 25539 [main] run 14276 mount_info::conv_to_posix_path: /c/Program Files/Common Files/Voltage Security = conv_to_posix_path (C:\Program Files\Common Files\Voltage Security)
32 25571 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (c:\users\dk068x\frameworks\phantomjs-1.9.0-windows, keep-rel, no-add-slash)
32 25603 [main] run 14276 normalize_win32_path: C:\users\dk068x\frameworks\phantomjs-1.9.0-windows = normalize_win32_path (c:\users\dk068x\frameworks\phantomjs-1.9.0-windows)
32 25635 [main] run 14276 mount_info::conv_to_posix_path: /c/users/dk068x/frameworks/phantomjs-1.9.0-windows = conv_to_posix_path (c:\users\dk068x\frameworks\phantomjs-1.9.0-windows)
33 25668 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\eclipse\Groovy\Groovy-2.1.7\bin, keep-rel, no-add-slash)
32 25700 [main] run 14276 normalize_win32_path: C:\eclipse\Groovy\Groovy-2.1.7\bin = normalize_win32_path (C:\eclipse\Groovy\Groovy-2.1.7\bin)
32 25732 [main] run 14276 mount_info::conv_to_posix_path: /c/eclipse/Groovy/Groovy-2.1.7/bin = conv_to_posix_path (C:\eclipse\Groovy\Groovy-2.1.7\bin)
32 25764 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Program Files\ATT Connect\OutlookAddin\Outlook, keep-rel, no-add-slash)
32 25796 [main] run 14276 normalize_win32_path: C:\Program Files\ATT Connect\OutlookAddin\Outlook = normalize_win32_path (C:\Program Files\ATT Connect\OutlookAddin\Outlook)
33 25829 [main] run 14276 mount_info::conv_to_posix_path: /c/Program Files/ATT Connect/OutlookAddin/Outlook = conv_to_posix_path (C:\Program Files\ATT Connect\OutlookAddin\Outlook)
32 25861 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (c:\Users\dk068x\frameworks\sonar-runner-2.3\bin, keep-rel, no-add-slash)
35 25896 [main] run 14276 normalize_win32_path: C:\Users\dk068x\frameworks\sonar-runner-2.3\bin = normalize_win32_path (c:\Users\dk068x\frameworks\sonar-runner-2.3\bin)
33 25929 [main] run 14276 mount_info::conv_to_posix_path: /c/Users/dk068x/frameworks/sonar-runner-2.3/bin = conv_to_posix_path (c:\Users\dk068x\frameworks\sonar-runner-2.3\bin)
36 25965 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Users\dk068x\AppData\Roaming\npm, keep-rel, no-add-slash)
35 26000 [main] run 14276 normalize_win32_path: C:\Users\dk068x\AppData\Roaming\npm = normalize_win32_path (C:\Users\dk068x\AppData\Roaming\npm)
33 26033 [main] run 14276 mount_info::conv_to_posix_path: /c/Users/dk068x/AppData/Roaming/npm = conv_to_posix_path (C:\Users\dk068x\AppData\Roaming\npm)
70 26103 [main] run 14276 win_env::add_cache: posix /c/Program Files/Voltage Security/Voltage SecureFile:/c/Program Files/CollabNet/Subversion Client:/c/Program Files/RSA SecurID Token Common:/c/Windows/system32:/c/Windows:/c/Windows/System32/Wbem:/c/Windows/System32/WindowsPowerShell/v1.0:/c/Program Files/Enterprise Vault/EVClient:/c/Program Files/Code Collaborator Client:/c/Program Files/nodejs:/c/Program Files/Voltage Security/Voltage SecureMail:/c/Program Files/Common Files/Voltage Security:/c/users/dk068x/frameworks/phantomjs-1.9.0-windows:/c/eclipse/Groovy/Groovy-2.1.7/bin:/c/Program Files/ATT Connect/OutlookAddin/Outlook:/c/Users/dk068x/frameworks/sonar-runner-2.3/bin:/c/Users/dk068x/AppData/Roaming/npm
42 26145 [main] run 14276 win_env::add_cache: native PATH=C:\Program Files\Voltage Security\Voltage SecureFile\;C:\Program Files\CollabNet\Subversion Client;C:\Program Files\RSA SecurID Token Common;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Enterprise Vault\EVClient\;C:\Program Files\Code Collaborator Client;C:\Program Files\nodejs\;C:\Program Files\Voltage Security\Voltage SecureMail\;C:\Program Files\Common Files\Voltage Security\;c:\users\dk068x\frameworks\phantomjs-1.9.0-windows;C:\eclipse\Groovy\Groovy-2.1.7\bin;C:\Program Files\ATT Connect\OutlookAddin\Outlook;c:\Users\dk068x\frameworks\sonar-runner-2.3\bin;C:\Users\dk068x\AppData\Roaming\npm\
40 26185 [main] run 14276 posify_maybe: env var converted to PATH=/c/Program Files/Voltage Security/Voltage SecureFile:/c/Program Files/CollabNet/Subversion Client:/c/Program Files/RSA SecurID Token Common:/c/Windows/system32:/c/Windows:/c/Windows/System32/Wbem:/c/Windows/System32/WindowsPowerShell/v1.0:/c/Program Files/Enterprise Vault/EVClient:/c/Program Files/Code Collaborator Client:/c/Program Files/nodejs:/c/Program Files/Voltage Security/Voltage SecureMail:/c/Program Files/Common Files/Voltage Security:/c/users/dk068x/frameworks/phantomjs-1.9.0-windows:/c/eclipse/Groovy/Groovy-2.1.7/bin:/c/Program Files/ATT Connect/OutlookAddin/Outlook:/c/Users/dk068x/frameworks/sonar-runner-2.3/bin:/c/Users/dk068x/AppData/Roaming/npm
78 26263 [main] run 14276 environ_init: 0x20038E48: PATH=/c/Program Files/Voltage Security/Voltage SecureFile:/c/Program Files/CollabNet/Subversion Client:/c/Program Files/RSA SecurID Token Common:/c/Windows/system32:/c/Windows:/c/Windows/System32/Wbem:/c/Windows/System32/WindowsPowerShell/v1.0:/c/Program Files/Enterprise Vault/EVClient:/c/Program Files/Code Collaborator Client:/c/Program Files/nodejs:/c/Program Files/Voltage Security/Voltage SecureMail:/c/Program Files/Common Files/Voltage Security:/c/users/dk068x/frameworks/phantomjs-1.9.0-windows:/c/eclipse/Groovy/Groovy-2.1.7/bin:/c/Program Files/ATT Connect/OutlookAddin/Outlook:/c/Users/dk068x/frameworks/sonar-runner-2.3/bin:/c/Users/dk068x/AppData/Roaming/npm
64 26327 [main] run 14276 environ_init: 0x20028640: PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC;.groovy;.gy;.groovy;.gy
56 26383 [main] run 14276 environ_init: 0x200286A0: PHANTOMJS_HOME=c:\users\dk068x\frameworks\phantomjs-1.9.0-windows
52 26435 [main] run 14276 environ_init: 0x200286E8: PROCESSOR_ARCHITECTURE=x86
53 26488 [main] run 14276 environ_init: 0x20028708: PROCESSOR_IDENTIFIER=x86 Family 6 Model 42 Stepping 7, GenuineIntel
53 26541 [main] run 14276 environ_init: 0x20028758: PROCESSOR_LEVEL=6
111 26652 [main] run 14276 environ_init: 0x20028770: PROCESSOR_REVISION=2a07
61 26713 [main] run 14276 environ_init: 0x20028790: ProgramData=C:\ProgramData
56 26769 [main] run 14276 environ_init: 0x200287B0: PROGRAMFILES=C:\Program Files
53 26822 [main] run 14276 environ_init: 0x200287D8: PROMPT=$P$G
56 26878 [main] run 14276 environ_init: 0x200287F0: PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
57 26935 [main] run 14276 environ_init: 0x20028838: PUBLIC=C:\Users\Public
51 26986 [main] run 14276 environ_init: 0x20028858: SESSIONNAME=Console
51 27037 [main] run 14276 environ_init: 0x20028878: SQUIRREL_JAVA_HOME=c:\eclipse\Java\jdk1.7.0_15
50 27087 [main] run 14276 environ_init: 0x200288B0: SYSTEMDRIVE=C:
49 27136 [main] run 14276 environ_init: 0x200288C8: SYSTEMROOT=C:\Windows
51 27187 [main] run 14276 getwinenv: can't set native for TEMP= since no environ yet
31 27218 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Users\dk068x\AppData\Local\Temp, no-keep-rel, no-add-slash)
32 27250 [main] run 14276 normalize_win32_path: C:\Users\dk068x\AppData\Local\Temp = normalize_win32_path (C:\Users\dk068x\AppData\Local\Temp)
33 27283 [main] run 14276 mount_info::conv_to_posix_path: /c/Users/dk068x/AppData/Local/Temp = conv_to_posix_path (C:\Users\dk068x\AppData\Local\Temp)
66 27349 [main] run 14276 win_env::add_cache: posix /c/Users/dk068x/AppData/Local/Temp
31 27380 [main] run 14276 win_env::add_cache: native TEMP=C:\Users\dk068x\AppData\Local\Temp
30 27410 [main] run 14276 posify_maybe: env var converted to TEMP=/c/Users/dk068x/AppData/Local/Temp
65 27475 [main] run 14276 environ_init: 0x20039178: TEMP=/c/Users/dk068x/AppData/Local/Temp
51 27526 [main] run 14276 getwinenv: can't set native for TMP= since no environ yet
31 27557 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Users\dk068x\AppData\Local\Temp, no-keep-rel, no-add-slash)
32 27589 [main] run 14276 normalize_win32_path: C:\Users\dk068x\AppData\Local\Temp = normalize_win32_path (C:\Users\dk068x\AppData\Local\Temp)
31 27620 [main] run 14276 mount_info::conv_to_posix_path: /c/Users/dk068x/AppData/Local/Temp = conv_to_posix_path (C:\Users\dk068x\AppData\Local\Temp)
66 27686 [main] run 14276 win_env::add_cache: posix /c/Users/dk068x/AppData/Local/Temp
31 27717 [main] run 14276 win_env::add_cache: native TMP=C:\Users\dk068x\AppData\Local\Temp
30 27747 [main] run 14276 posify_maybe: env var converted to TMP=/c/Users/dk068x/AppData/Local/Temp
64 27811 [main] run 14276 environ_init: 0x20039200: TMP=/c/Users/dk068x/AppData/Local/Temp
51 27862 [main] run 14276 environ_init: 0x20039230: UATDATA=C:\Windows\system32\CCM\UATData\D9F8C395-CAB8-491d-B8AC-179A1FE1BE77
65 27927 [main] run 14276 environ_init: 0x200390F0: USERDNSDOMAIN=ITSERVICES.SBC.COM
50 27977 [main] run 14276 environ_init: 0x20039288: USERDOMAIN=ITSERVICES
49 28026 [main] run 14276 environ_init: 0x200392A8: USERNAME=dk068x
49 28075 [main] run 14276 environ_init: 0x200392C0: USERPROFILE=C:\Users\dk068x
48 28123 [main] run 14276 environ_init: 0x200392E8: VSEDEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
51 28174 [main] run 14276 environ_init: 0x20039328: WINDIR=C:\Windows
48 28222 [main] run 14276 environ_init: 0x20039340: windows_tracing_flags=3
55 28277 [main] run 14276 environ_init: 0x20039360: windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log
54 28331 [main] run 14276 environ_init: 0x200393B0: WL_HOME=c:\Oracle\Middleware\wlserver_10.3
65 28396 [main] run 14276 pinfo_init: Set nice to 0
30 28426 [main] run 14276 pinfo_init: pid 14276, pgid 14276
34 28460 [main] run 14276 App version: 1007.21, api: 0.267
31 28491 [main] run 14276 DLL version: 1007.25, api: 0.270
30 28521 [main] run 14276 DLL build: 2013-08-31 20:39
33 28554 [main] run 14276 dtable::extend: size 32, fds 0x612A4504
494 29048 [main] run 14276 pwdgrp::load: \etc\passwd curr_lines 9
62 29110 [main] run 14276 pwdgrp::load: \etc\passwd load succeeded
478 29588 [main] run 14276 pwdgrp::load: \etc\group curr_lines 21
55 29643 [main] run 14276 pwdgrp::load: \etc\group load succeeded
36 29679 [main] run 14276 cygheap_user::ontherange: what 2, pw 0x20039860
32 29711 [main] run 14276 cygheap_user::ontherange: Set HOME (from /etc/passwd) to /home/dk068x
191 29902 [main] run 14276 normalize_posix_path: src /home/dk068x
59 29961 [main] run 14276 normalize_posix_path: /home/dk068x = normalize_posix_path (/home/dk068x)
43 30004 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/home/dk068x)
38 30042 [main] run 14276 mount_info::cygdrive_win32_path: src '/home/dk068x', dst ''
34 30076 [main] run 14276 set_flags: flags: binary (0x2)
31 30107 [main] run 14276 mount_info::conv_to_win32_path: src_path /home/dk068x, dst C:\Cygwin\home\dk068x, flags 0x3000A, rc 0
145 30252 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Cygwin\home\dk068x)
63 30315 [main] run 14276 symlink_info::check: not a symlink
66 30381 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Cygwin\home\dk068x, 0x229278) (0x83000A)
36 30417 [main] run 14276 path_conv::check: this->path(C:\Cygwin\home\dk068x), has_acls(1)
53 30470 [main] run 14276 win_env::add_cache: posix /home/dk068x
30 30500 [main] run 14276 win_env::add_cache: native HOME=C:\Cygwin\home\dk068x
49 30549 [main] run 14276 normalize_posix_path: src /home/dk068x
31 30580 [main] run 14276 normalize_posix_path: /home/dk068x = normalize_posix_path (/home/dk068x)
31 30611 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/home/dk068x)
31 30642 [main] run 14276 mount_info::cygdrive_win32_path: src '/home/dk068x', dst ''
31 30673 [main] run 14276 set_flags: flags: binary (0x2)
31 30704 [main] run 14276 mount_info::conv_to_win32_path: src_path /home/dk068x, dst C:\Cygwin\home\dk068x, flags 0x3000A, rc 0
123 30827 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Cygwin\home\dk068x)
52 30879 [main] run 14276 symlink_info::check: not a symlink
88 30967 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Cygwin\home\dk068x, 0x2292D8) (0x83000A)
37 31004 [main] run 14276 path_conv::check: this->path(C:\Cygwin\home\dk068x), has_acls(1)
62 31066 [main] run 14276 win_env::add_cache: posix /home/dk068x
38 31104 [main] run 14276 win_env::add_cache: native HOME=C:\Cygwin\home\dk068x
94 31198 [main] run 14276 build_argv: argv[0] = 'C:\Cygwin\bin\run.exe'
32 31230 [main] run 14276 build_argv: argv[1] = '-p'
31 31261 [main] run 14276 build_argv: argv[2] = '/usr/bin'
33 31294 [main] run 14276 build_argv: argv[3] = 'bash'
30 31324 [main] run 14276 build_argv: argv[4] = '-l'
30 31354 [main] run 14276 build_argv: argv[5] = '-i'
30 31384 [main] run 14276 build_argv: argv[6] = '-c'
31 31415 [main] run 14276 build_argv: argv[7] = 'emacs -display 127.0.0.1:0.0 --debug-init'
31 31446 [main] run 14276 build_argv: argc 8
50 31496 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Cygwin\bin\run.exe, keep-rel, no-add-slash)
32 31528 [main] run 14276 normalize_win32_path: C:\Cygwin\bin\run.exe = normalize_win32_path (C:\Cygwin\bin\run.exe)
33 31561 [main] run 14276 mount_info::conv_to_posix_path: /usr/bin/run.exe = conv_to_posix_path (C:\Cygwin\bin\run.exe)
2454 34015 [main] run 14276 handle_to_fn: current match 'C:' = '\Device\HarddiskVolume1'
245 34260 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Users\dk068x\strace.log, no-keep-rel, no-add-slash)
39 34299 [main] run 14276 normalize_win32_path: C:\Users\dk068x\strace.log = normalize_win32_path (C:\Users\dk068x\strace.log)
35 34334 [main] run 14276 mount_info::conv_to_posix_path: /c/Users/dk068x/strace.log = conv_to_posix_path (C:\Users\dk068x\strace.log)
36 34370 [main] run 14276 handle_to_fn: derived path 'C:\Users\dk068x\strace.log', posix '/c/Users/dk068x/strace.log'
36 34406 [main] run 14276 normalize_posix_path: src /c/Users/dk068x/strace.log
32 34438 [main] run 14276 normalize_posix_path: /c/Users/dk068x/strace.log = normalize_posix_path (/c/Users/dk068x/strace.log)
32 34470 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Users/dk068x/strace.log)
32 34502 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Users/dk068x/strace.log', dst 'C:\Users\dk068x\strace.log'
31 34533 [main] run 14276 set_flags: flags: binary (0x2)
31 34564 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Users/dk068x/strace.log, dst C:\Users\dk068x\strace.log, flags 0x4022, rc 0
261 34825 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Users\dk068x\strace.log)
57 34882 [main] run 14276 symlink_info::check: not a symlink
126 35008 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Users\dk068x\strace.log, 0x229958) (0x4022)
41 35049 [main] run 14276 path_conv::check: this->path(C:\Users\dk068x\strace.log), has_acls(1)
51 35100 [main] run 14276 build_fh_pc: fh 0x612A46C4, dev 000000C3
39 35139 [main] run 14276 fhandler_base::set_flags: flags 0x10001, supplied_bin 0x0
34 35173 [main] run 14276 fhandler_base::set_flags: O_TEXT/O_BINARY set in flags 0x10000
32 35205 [main] run 14276 fhandler_base::set_flags: filemode set to binary
31 35236 [main] run 14276 fhandler_base::init: created new fhandler_base for handle 0x50, bin 1
61 35297 [main] run 14276 __set_errno: void dll_crt0_1(void*):995 setting errno 0
532 35829 [main] run 14276 normalize_posix_path: src /c/Program Files/Voltage Security/Voltage SecureFile
75 35904 [main] run 14276 normalize_posix_path: /c/Program Files/Voltage Security/Voltage SecureFile = normalize_posix_path (/c/Program Files/Voltage Security/Voltage SecureFile)
37 35941 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/Voltage Security/Voltage SecureFile)
63 36004 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/Voltage Security/Voltage SecureFile', dst 'C:\Program Files\Voltage Security\Voltage SecureFile'
78 36082 [main] run 14276 set_flags: flags: binary (0x2)
89 36171 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/Voltage Security/Voltage SecureFile, dst C:\Program Files\Voltage Security\Voltage SecureFile, flags 0x4022, rc 0
285 36456 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\Voltage Security\Voltage SecureFile)
76 36532 [main] run 14276 symlink_info::check: not a symlink
88 36620 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\Voltage Security\Voltage SecureFile, 0x223938) (0x804022)
37 36657 [main] run 14276 path_conv::check: this->path(C:\Program Files\Voltage Security\Voltage SecureFile), has_acls(1)
39 36696 [main] run 14276 normalize_posix_path: src /c/Program Files/CollabNet/Subversion Client
32 36728 [main] run 14276 normalize_posix_path: /c/Program Files/CollabNet/Subversion Client = normalize_posix_path (/c/Program Files/CollabNet/Subversion Client)
32 36760 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/CollabNet/Subversion Client)
33 36793 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/CollabNet/Subversion Client', dst 'C:\Program Files\CollabNet\Subversion Client'
32 36825 [main] run 14276 set_flags: flags: binary (0x2)
30 36855 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/CollabNet/Subversion Client, dst C:\Program Files\CollabNet\Subversion Client, flags 0x4022, rc 0
163 37018 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\CollabNet\Subversion Client)
62 37080 [main] run 14276 symlink_info::check: not a symlink
91 37171 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\CollabNet\Subversion Client, 0x223938) (0x804022)
65 37236 [main] run 14276 path_conv::check: this->path(C:\Program Files\CollabNet\Subversion Client), has_acls(1)
43 37279 [main] run 14276 normalize_posix_path: src /c/Program Files/RSA SecurID Token Common
34 37313 [main] run 14276 normalize_posix_path: /c/Program Files/RSA SecurID Token Common = normalize_posix_path (/c/Program Files/RSA SecurID Token Common)
100 37413 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/RSA SecurID Token Common)
35 37448 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/RSA SecurID Token Common', dst 'C:\Program Files\RSA SecurID Token Common'
33 37481 [main] run 14276 set_flags: flags: binary (0x2)
30 37511 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/RSA SecurID Token Common, dst C:\Program Files\RSA SecurID Token Common, flags 0x4022, rc 0
141 37652 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\RSA SecurID Token Common)
52 37704 [main] run 14276 symlink_info::check: not a symlink
64 37768 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\RSA SecurID Token Common, 0x223938) (0x804022)
35 37803 [main] run 14276 path_conv::check: this->path(C:\Program Files\RSA SecurID Token Common), has_acls(1)
36 37839 [main] run 14276 normalize_posix_path: src /c/Windows/system32
32 37871 [main] run 14276 normalize_posix_path: /c/Windows/system32 = normalize_posix_path (/c/Windows/system32)
84 37955 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Windows/system32)
72 38027 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Windows/system32', dst 'C:\Windows\system32'
69 38096 [main] run 14276 set_flags: flags: binary (0x2)
68 38164 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Windows/system32, dst C:\Windows\system32, flags 0x4022, rc 0
185 38349 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Windows\system32)
57 38406 [main] run 14276 symlink_info::check: not a symlink
85 38491 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Windows\system32, 0x223938) (0x804022)
36 38527 [main] run 14276 path_conv::check: this->path(C:\Windows\system32), has_acls(1)
36 38563 [main] run 14276 normalize_posix_path: src /c/Windows
32 38595 [main] run 14276 normalize_posix_path: /c/Windows = normalize_posix_path (/c/Windows)
31 38626 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Windows)
32 38658 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Windows', dst 'C:\Windows'
31 38689 [main] run 14276 set_flags: flags: binary (0x2)
31 38720 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Windows, dst C:\Windows, flags 0x4022, rc 0
146 38866 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Windows)
109 38975 [main] run 14276 symlink_info::check: not a symlink
125 39100 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Windows, 0x223938) (0x804022)
70 39170 [main] run 14276 path_conv::check: this->path(C:\Windows), has_acls(1)
57 39227 [main] run 14276 normalize_posix_path: src /c/Windows/System32/Wbem
48 39275 [main] run 14276 normalize_posix_path: /c/Windows/System32/Wbem = normalize_posix_path (/c/Windows/System32/Wbem)
48 39323 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Windows/System32/Wbem)
49 39372 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Windows/System32/Wbem', dst 'C:\Windows\System32\Wbem'
47 39419 [main] run 14276 set_flags: flags: binary (0x2)
47 39466 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Windows/System32/Wbem, dst C:\Windows\System32\Wbem, flags 0x4022, rc 0
234 39700 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Windows\System32\Wbem)
62 39762 [main] run 14276 symlink_info::check: not a symlink
69 39831 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Windows\System32\Wbem, 0x223938) (0x804022)
35 39866 [main] run 14276 path_conv::check: this->path(C:\Windows\System32\Wbem), has_acls(1)
39 39905 [main] run 14276 normalize_posix_path: src /c/Windows/System32/WindowsPowerShell/v1.0
32 39937 [main] run 14276 normalize_posix_path: /c/Windows/System32/WindowsPowerShell/v1.0 = normalize_posix_path (/c/Windows/System32/WindowsPowerShell/v1.0)
32 39969 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Windows/System32/WindowsPowerShell/v1.0)
32 40001 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Windows/System32/WindowsPowerShell/v1.0', dst 'C:\Windows\System32\WindowsPowerShell\v1.0'
32 40033 [main] run 14276 set_flags: flags: binary (0x2)
30 40063 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Windows/System32/WindowsPowerShell/v1.0, dst C:\Windows\System32\WindowsPowerShell\v1.0, flags 0x4022, rc 0
138 40201 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Windows\System32\WindowsPowerShell\v1.0)
51 40252 [main] run 14276 symlink_info::check: not a symlink
61 40313 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Windows\System32\WindowsPowerShell\v1.0, 0x223938) (0x804022)
34 40347 [main] run 14276 path_conv::check: this->path(C:\Windows\System32\WindowsPowerShell\v1.0), has_acls(1)
40 40387 [main] run 14276 normalize_posix_path: src /c/Program Files/Enterprise Vault/EVClient
32 40419 [main] run 14276 normalize_posix_path: /c/Program Files/Enterprise Vault/EVClient = normalize_posix_path (/c/Program Files/Enterprise Vault/EVClient)
31 40450 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/Enterprise Vault/EVClient)
32 40482 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/Enterprise Vault/EVClient', dst 'C:\Program Files\Enterprise Vault\EVClient'
31 40513 [main] run 14276 set_flags: flags: binary (0x2)
30 40543 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/Enterprise Vault/EVClient, dst C:\Program Files\Enterprise Vault\EVClient, flags 0x4022, rc 0
133 40676 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\Enterprise Vault\EVClient)
49 40725 [main] run 14276 symlink_info::check: not a symlink
61 40786 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\Enterprise Vault\EVClient, 0x223938) (0x804022)
34 40820 [main] run 14276 path_conv::check: this->path(C:\Program Files\Enterprise Vault\EVClient), has_acls(1)
35 40855 [main] run 14276 normalize_posix_path: src /c/Program Files/Code Collaborator Client
44 40899 [main] run 14276 normalize_posix_path: /c/Program Files/Code Collaborator Client = normalize_posix_path (/c/Program Files/Code Collaborator Client)
53 40952 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/Code Collaborator Client)
35 40987 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/Code Collaborator Client', dst 'C:\Program Files\Code Collaborator Client'
35 41022 [main] run 14276 set_flags: flags: binary (0x2)
36 41058 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/Code Collaborator Client, dst C:\Program Files\Code Collaborator Client, flags 0x4022, rc 0
151 41209 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\Code Collaborator Client)
53 41262 [main] run 14276 symlink_info::check: not a symlink
65 41327 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\Code Collaborator Client, 0x223938) (0x804022)
36 41363 [main] run 14276 path_conv::check: this->path(C:\Program Files\Code Collaborator Client), has_acls(1)
40 41403 [main] run 14276 normalize_posix_path: src /c/Program Files/nodejs
34 41437 [main] run 14276 normalize_posix_path: /c/Program Files/nodejs = normalize_posix_path (/c/Program Files/nodejs)
33 41470 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/nodejs)
32 41502 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/nodejs', dst 'C:\Program Files\nodejs'
32 41534 [main] run 14276 set_flags: flags: binary (0x2)
30 41564 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/nodejs, dst C:\Program Files\nodejs, flags 0x4022, rc 0
131 41695 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\nodejs)
51 41746 [main] run 14276 symlink_info::check: not a symlink
83 41829 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\nodejs, 0x223938) (0x804022)
36 41865 [main] run 14276 path_conv::check: this->path(C:\Program Files\nodejs), has_acls(1)
51 41916 [main] run 14276 normalize_posix_path: src /c/Program Files/Voltage Security/Voltage SecureMail
34 41950 [main] run 14276 normalize_posix_path: /c/Program Files/Voltage Security/Voltage SecureMail = normalize_posix_path (/c/Program Files/Voltage Security/Voltage SecureMail)
33 41983 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/Voltage Security/Voltage SecureMail)
33 42016 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/Voltage Security/Voltage SecureMail', dst 'C:\Program Files\Voltage Security\Voltage SecureMail'
32 42048 [main] run 14276 set_flags: flags: binary (0x2)
30 42078 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/Voltage Security/Voltage SecureMail, dst C:\Program Files\Voltage Security\Voltage SecureMail, flags 0x4022, rc 0
132 42210 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\Voltage Security\Voltage SecureMail)
50 42260 [main] run 14276 symlink_info::check: not a symlink
60 42320 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\Voltage Security\Voltage SecureMail, 0x223938) (0x804022)
34 42354 [main] run 14276 path_conv::check: this->path(C:\Program Files\Voltage Security\Voltage SecureMail), has_acls(1)
37 42391 [main] run 14276 normalize_posix_path: src /c/Program Files/Common Files/Voltage Security
33 42424 [main] run 14276 normalize_posix_path: /c/Program Files/Common Files/Voltage Security = normalize_posix_path (/c/Program Files/Common Files/Voltage Security)
32 42456 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/Common Files/Voltage Security)
32 42488 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/Common Files/Voltage Security', dst 'C:\Program Files\Common Files\Voltage Security'
31 42519 [main] run 14276 set_flags: flags: binary (0x2)
31 42550 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/Common Files/Voltage Security, dst C:\Program Files\Common Files\Voltage Security, flags 0x4022, rc 0
127 42677 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\Common Files\Voltage Security)
49 42726 [main] run 14276 symlink_info::check: not a symlink
60 42786 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\Common Files\Voltage Security, 0x223938) (0x804022)
35 42821 [main] run 14276 path_conv::check: this->path(C:\Program Files\Common Files\Voltage Security), has_acls(1)
36 42857 [main] run 14276 normalize_posix_path: src /c/users/dk068x/frameworks/phantomjs-1.9.0-windows
35 42892 [main] run 14276 normalize_posix_path: /c/users/dk068x/frameworks/phantomjs-1.9.0-windows = normalize_posix_path (/c/users/dk068x/frameworks/phantomjs-1.9.0-windows)
33 42925 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/users/dk068x/frameworks/phantomjs-1.9.0-windows)
36 42961 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/users/dk068x/frameworks/phantomjs-1.9.0-windows', dst 'C:\users\dk068x\frameworks\phantomjs-1.9.0-windows'
36 42997 [main] run 14276 set_flags: flags: binary (0x2)
31 43028 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/users/dk068x/frameworks/phantomjs-1.9.0-windows, dst C:\users\dk068x\frameworks\phantomjs-1.9.0-windows, flags 0x4022, rc 0
123 43151 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\users\dk068x\frameworks\phantomjs-1.9.0-windows)
50 43201 [main] run 14276 symlink_info::check: not a symlink
81 43282 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\users\dk068x\frameworks\phantomjs-1.9.0-windows, 0x223938) (0x804022)
35 43317 [main] run 14276 path_conv::check: this->path(C:\users\dk068x\frameworks\phantomjs-1.9.0-windows), has_acls(1)
36 43353 [main] run 14276 normalize_posix_path: src /c/eclipse/Groovy/Groovy-2.1.7/bin
31 43384 [main] run 14276 normalize_posix_path: /c/eclipse/Groovy/Groovy-2.1.7/bin = normalize_posix_path (/c/eclipse/Groovy/Groovy-2.1.7/bin)
32 43416 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/eclipse/Groovy/Groovy-2.1.7/bin)
32 43448 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/eclipse/Groovy/Groovy-2.1.7/bin', dst 'C:\eclipse\Groovy\Groovy-2.1.7\bin'
31 43479 [main] run 14276 set_flags: flags: binary (0x2)
31 43510 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/eclipse/Groovy/Groovy-2.1.7/bin, dst C:\eclipse\Groovy\Groovy-2.1.7\bin, flags 0x4022, rc 0
123 43633 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\eclipse\Groovy\Groovy-2.1.7\bin)
49 43682 [main] run 14276 symlink_info::check: not a symlink
77 43759 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\eclipse\Groovy\Groovy-2.1.7\bin, 0x223938) (0x804022)
35 43794 [main] run 14276 path_conv::check: this->path(C:\eclipse\Groovy\Groovy-2.1.7\bin), has_acls(1)
35 43829 [main] run 14276 normalize_posix_path: src /c/Program Files/ATT Connect/OutlookAddin/Outlook
31 43860 [main] run 14276 normalize_posix_path: /c/Program Files/ATT Connect/OutlookAddin/Outlook = normalize_posix_path (/c/Program Files/ATT Connect/OutlookAddin/Outlook)
36 43896 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/ATT Connect/OutlookAddin/Outlook)
37 43933 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/ATT Connect/OutlookAddin/Outlook', dst 'C:\Program Files\ATT Connect\OutlookAddin\Outlook'
33 43966 [main] run 14276 set_flags: flags: binary (0x2)
30 43996 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/ATT Connect/OutlookAddin/Outlook, dst C:\Program Files\ATT Connect\OutlookAddin\Outlook, flags 0x4022, rc 0
155 44151 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\ATT Connect\OutlookAddin\Outlook)
53 44204 [main] run 14276 symlink_info::check: not a symlink
69 44273 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\ATT Connect\OutlookAddin\Outlook, 0x223938) (0x804022)
35 44308 [main] run 14276 path_conv::check: this->path(C:\Program Files\ATT Connect\OutlookAddin\Outlook), has_acls(1)
36 44344 [main] run 14276 normalize_posix_path: src /c/Users/dk068x/frameworks/sonar-runner-2.3/bin
32 44376 [main] run 14276 normalize_posix_path: /c/Users/dk068x/frameworks/sonar-runner-2.3/bin = normalize_posix_path (/c/Users/dk068x/frameworks/sonar-runner-2.3/bin)
32 44408 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Users/dk068x/frameworks/sonar-runner-2.3/bin)
32 44440 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Users/dk068x/frameworks/sonar-runner-2.3/bin', dst 'C:\Users\dk068x\frameworks\sonar-runner-2.3\bin'
31 44471 [main] run 14276 set_flags: flags: binary (0x2)
31 44502 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Users/dk068x/frameworks/sonar-runner-2.3/bin, dst C:\Users\dk068x\frameworks\sonar-runner-2.3\bin, flags 0x4022, rc 0
620 45122 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Users\dk068x\frameworks\sonar-runner-2.3\bin)
59 45181 [main] run 14276 symlink_info::check: not a symlink
63 45244 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Users\dk068x\frameworks\sonar-runner-2.3\bin, 0x223938) (0x804022)
35 45279 [main] run 14276 path_conv::check: this->path(C:\Users\dk068x\frameworks\sonar-runner-2.3\bin), has_acls(1)
37 45316 [main] run 14276 normalize_posix_path: src /c/Users/dk068x/AppData/Roaming/npm
31 45347 [main] run 14276 normalize_posix_path: /c/Users/dk068x/AppData/Roaming/npm = normalize_posix_path (/c/Users/dk068x/AppData/Roaming/npm)
32 45379 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Users/dk068x/AppData/Roaming/npm)
32 45411 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Users/dk068x/AppData/Roaming/npm', dst 'C:\Users\dk068x\AppData\Roaming\npm'
32 45443 [main] run 14276 set_flags: flags: binary (0x2)
30 45473 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Users/dk068x/AppData/Roaming/npm, dst C:\Users\dk068x\AppData\Roaming\npm, flags 0x4022, rc 0
431 45904 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Users\dk068x\AppData\Roaming\npm)
76 45980 [main] run 14276 symlink_info::check: not a symlink
66 46046 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Users\dk068x\AppData\Roaming\npm, 0x223938) (0x804022)
36 46082 [main] run 14276 path_conv::check: this->path(C:\Users\dk068x\AppData\Roaming\npm), has_acls(1)
37 46119 [main] run 14276 normalize_posix_path: src /usr/bin
31 46150 [main] run 14276 normalize_posix_path: /usr/bin = normalize_posix_path (/usr/bin)
35 46185 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/usr/bin)
41 46226 [main] run 14276 mount_info::cygdrive_win32_path: src '/usr/bin', dst ''
33 46259 [main] run 14276 set_flags: flags: binary (0x2)
31 46290 [main] run 14276 mount_info::conv_to_win32_path: src_path /usr/bin, dst C:\Cygwin\bin, flags 0x2000A, rc 0
205 46495 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Cygwin\bin)
62 46557 [main] run 14276 symlink_info::check: not a symlink
126 46683 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Cygwin\bin, 0x223938) (0x82000A)
45 46728 [main] run 14276 path_conv::check: this->path(C:\Cygwin\bin), has_acls(1)
199 46927 [main] run 14276 win_env::add_cache: posix /c/Program Files/Voltage Security/Voltage SecureFile:/c/Program Files/CollabNet/Subversion Client:/c/Program Files/RSA SecurID Token Common:/c/Windows/system32:/c/Windows:/c/Windows/System32/Wbem:/c/Windows/System32/WindowsPowerShell/v1.0:/c/Program Files/Enterprise Vault/EVClient:/c/Program Files/Code Collaborator Client:/c/Program Files/nodejs:/c/Program Files/Voltage Security/Voltage SecureMail:/c/Program Files/Common Files/Voltage Security:/c/users/dk068x/frameworks/phantomjs-1.9.0-windows:/c/eclipse/Groovy/Groovy-2.1.7/bin:/c/Program Files/ATT Connect/OutlookAddin/Outlook:/c/Users/dk068x/frameworks/sonar-runner-2.3/bin:/c/Users/dk068x/AppData/Roaming/npm:/usr/bin
49 46976 [main] run 14276 win_env::add_cache: native PATH=C:\Program Files\Voltage Security\Voltage SecureFile;C:\Program Files\CollabNet\Subversion Client;C:\Program Files\RSA SecurID Token Common;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Enterprise Vault\EVClient;C:\Program Files\Code Collaborator Client;C:\Program Files\nodejs;C:\Program Files\Voltage Security\Voltage SecureMail;C:\Program Files\Common Files\Voltage Security;C:\users\dk068x\frameworks\phantomjs-1.9.0-windows;C:\eclipse\Groovy\Groovy-2.1.7\bin;C:\Program Files\ATT Connect\OutlookAddin\Outlook;C:\Users\dk068x\frameworks\sonar-runner-2.3\bin;C:\Users\dk068x\AppData\Roaming\npm;C:\Cygwin\bin
65 47041 [main] run 14276 normalize_posix_path: src /c/Program Files/Voltage Security/Voltage SecureFile
33 47074 [main] run 14276 normalize_posix_path: /c/Program Files/Voltage Security/Voltage SecureFile = normalize_posix_path (/c/Program Files/Voltage Security/Voltage SecureFile)
32 47106 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/Voltage Security/Voltage SecureFile)
33 47139 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/Voltage Security/Voltage SecureFile', dst 'C:\Program Files\Voltage Security\Voltage SecureFile'
32 47171 [main] run 14276 set_flags: flags: binary (0x2)
30 47201 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/Voltage Security/Voltage SecureFile, dst C:\Program Files\Voltage Security\Voltage SecureFile, flags 0x4022, rc 0
150 47351 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\Voltage Security\Voltage SecureFile)
52 47403 [main] run 14276 symlink_info::check: not a symlink
65 47468 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\Voltage Security\Voltage SecureFile, 0x223998) (0x804022)
35 47503 [main] run 14276 path_conv::check: this->path(C:\Program Files\Voltage Security\Voltage SecureFile), has_acls(1)
36 47539 [main] run 14276 normalize_posix_path: src /c/Program Files/CollabNet/Subversion Client
31 47570 [main] run 14276 normalize_posix_path: /c/Program Files/CollabNet/Subversion Client = normalize_posix_path (/c/Program Files/CollabNet/Subversion Client)
32 47602 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/CollabNet/Subversion Client)
32 47634 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/CollabNet/Subversion Client', dst 'C:\Program Files\CollabNet\Subversion Client'
31 47665 [main] run 14276 set_flags: flags: binary (0x2)
30 47695 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/CollabNet/Subversion Client, dst C:\Program Files\CollabNet\Subversion Client, flags 0x4022, rc 0
132 47827 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\CollabNet\Subversion Client)
51 47878 [main] run 14276 symlink_info::check: not a symlink
81 47959 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\CollabNet\Subversion Client, 0x223998) (0x804022)
37 47996 [main] run 14276 path_conv::check: this->path(C:\Program Files\CollabNet\Subversion Client), has_acls(1)
36 48032 [main] run 14276 normalize_posix_path: src /c/Program Files/RSA SecurID Token Common
31 48063 [main] run 14276 normalize_posix_path: /c/Program Files/RSA SecurID Token Common = normalize_posix_path (/c/Program Files/RSA SecurID Token Common)
34 48097 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/RSA SecurID Token Common)
35 48132 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/RSA SecurID Token Common', dst 'C:\Program Files\RSA SecurID Token Common'
32 48164 [main] run 14276 set_flags: flags: binary (0x2)
30 48194 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/RSA SecurID Token Common, dst C:\Program Files\RSA SecurID Token Common, flags 0x4022, rc 0
144 48338 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\RSA SecurID Token Common)
51 48389 [main] run 14276 symlink_info::check: not a symlink
64 48453 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\RSA SecurID Token Common, 0x223998) (0x804022)
35 48488 [main] run 14276 path_conv::check: this->path(C:\Program Files\RSA SecurID Token Common), has_acls(1)
36 48524 [main] run 14276 normalize_posix_path: src /c/Windows/system32
31 48555 [main] run 14276 normalize_posix_path: /c/Windows/system32 = normalize_posix_path (/c/Windows/system32)
33 48588 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Windows/system32)
34 48622 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Windows/system32', dst 'C:\Windows\system32'
32 48654 [main] run 14276 set_flags: flags: binary (0x2)
30 48684 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Windows/system32, dst C:\Windows\system32, flags 0x4022, rc 0
148 48832 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Windows\system32)
56 48888 [main] run 14276 symlink_info::check: not a symlink
74 48962 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Windows\system32, 0x223998) (0x804022)
36 48998 [main] run 14276 path_conv::check: this->path(C:\Windows\system32), has_acls(1)
35 49033 [main] run 14276 normalize_posix_path: src /c/Windows
31 49064 [main] run 14276 normalize_posix_path: /c/Windows = normalize_posix_path (/c/Windows)
31 49095 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Windows)
31 49126 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Windows', dst 'C:\Windows'
31 49157 [main] run 14276 set_flags: flags: binary (0x2)
30 49187 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Windows, dst C:\Windows, flags 0x4022, rc 0
138 49325 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Windows)
51 49376 [main] run 14276 symlink_info::check: not a symlink
63 49439 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Windows, 0x223998) (0x804022)
34 49473 [main] run 14276 path_conv::check: this->path(C:\Windows), has_acls(1)
35 49508 [main] run 14276 normalize_posix_path: src /c/Windows/System32/Wbem
30 49538 [main] run 14276 normalize_posix_path: /c/Windows/System32/Wbem = normalize_posix_path (/c/Windows/System32/Wbem)
32 49570 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Windows/System32/Wbem)
32 49602 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Windows/System32/Wbem', dst 'C:\Windows\System32\Wbem'
30 49632 [main] run 14276 set_flags: flags: binary (0x2)
30 49662 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Windows/System32/Wbem, dst C:\Windows\System32\Wbem, flags 0x4022, rc 0
122 49784 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Windows\System32\Wbem)
49 49833 [main] run 14276 symlink_info::check: not a symlink
64 49897 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Windows\System32\Wbem, 0x223998) (0x804022)
37 49934 [main] run 14276 path_conv::check: this->path(C:\Windows\System32\Wbem), has_acls(1)
35 49969 [main] run 14276 normalize_posix_path: src /c/Windows/System32/WindowsPowerShell/v1.0
31 50000 [main] run 14276 normalize_posix_path: /c/Windows/System32/WindowsPowerShell/v1.0 = normalize_posix_path (/c/Windows/System32/WindowsPowerShell/v1.0)
32 50032 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Windows/System32/WindowsPowerShell/v1.0)
32 50064 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Windows/System32/WindowsPowerShell/v1.0', dst 'C:\Windows\System32\WindowsPowerShell\v1.0'
35 50099 [main] run 14276 set_flags: flags: binary (0x2)
30 50129 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Windows/System32/WindowsPowerShell/v1.0, dst C:\Windows\System32\WindowsPowerShell\v1.0, flags 0x4022, rc 0
130 50259 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Windows\System32\WindowsPowerShell\v1.0)
49 50308 [main] run 14276 symlink_info::check: not a symlink
60 50368 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Windows\System32\WindowsPowerShell\v1.0, 0x223998) (0x804022)
34 50402 [main] run 14276 path_conv::check: this->path(C:\Windows\System32\WindowsPowerShell\v1.0), has_acls(1)
36 50438 [main] run 14276 normalize_posix_path: src /c/Program Files/Enterprise Vault/EVClient
33 50471 [main] run 14276 normalize_posix_path: /c/Program Files/Enterprise Vault/EVClient = normalize_posix_path (/c/Program Files/Enterprise Vault/EVClient)
33 50504 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/Enterprise Vault/EVClient)
32 50536 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/Enterprise Vault/EVClient', dst 'C:\Program Files\Enterprise Vault\EVClient'
33 50569 [main] run 14276 set_flags: flags: binary (0x2)
29 50598 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/Enterprise Vault/EVClient, dst C:\Program Files\Enterprise Vault\EVClient, flags 0x4022, rc 0
125 50723 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\Enterprise Vault\EVClient)
49 50772 [main] run 14276 symlink_info::check: not a symlink
60 50832 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\Enterprise Vault\EVClient, 0x223998) (0x804022)
34 50866 [main] run 14276 path_conv::check: this->path(C:\Program Files\Enterprise Vault\EVClient), has_acls(1)
62 50928 [main] run 14276 normalize_posix_path: src /c/Program Files/Code Collaborator Client
38 50966 [main] run 14276 normalize_posix_path: /c/Program Files/Code Collaborator Client = normalize_posix_path (/c/Program Files/Code Collaborator Client)
33 50999 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/Code Collaborator Client)
34 51033 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/Code Collaborator Client', dst 'C:\Program Files\Code Collaborator Client'
35 51068 [main] run 14276 set_flags: flags: binary (0x2)
31 51099 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/Code Collaborator Client, dst C:\Program Files\Code Collaborator Client, flags 0x4022, rc 0
136 51235 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\Code Collaborator Client)
50 51285 [main] run 14276 symlink_info::check: not a symlink
62 51347 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\Code Collaborator Client, 0x223998) (0x804022)
34 51381 [main] run 14276 path_conv::check: this->path(C:\Program Files\Code Collaborator Client), has_acls(1)
36 51417 [main] run 14276 normalize_posix_path: src /c/Program Files/nodejs
31 51448 [main] run 14276 normalize_posix_path: /c/Program Files/nodejs = normalize_posix_path (/c/Program Files/nodejs)
31 51479 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/nodejs)
31 51510 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/nodejs', dst 'C:\Program Files\nodejs'
34 51544 [main] run 14276 set_flags: flags: binary (0x2)
30 51574 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/nodejs, dst C:\Program Files\nodejs, flags 0x4022, rc 0
122 51696 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\nodejs)
49 51745 [main] run 14276 symlink_info::check: not a symlink
60 51805 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\nodejs, 0x223998) (0x804022)
34 51839 [main] run 14276 path_conv::check: this->path(C:\Program Files\nodejs), has_acls(1)
36 51875 [main] run 14276 normalize_posix_path: src /c/Program Files/Voltage Security/Voltage SecureMail
49 51924 [main] run 14276 normalize_posix_path: /c/Program Files/Voltage Security/Voltage SecureMail = normalize_posix_path (/c/Program Files/Voltage Security/Voltage SecureMail)
38 51962 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/Voltage Security/Voltage SecureMail)
34 51996 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/Voltage Security/Voltage SecureMail', dst 'C:\Program Files\Voltage Security\Voltage SecureMail'
33 52029 [main] run 14276 set_flags: flags: binary (0x2)
35 52064 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/Voltage Security/Voltage SecureMail, dst C:\Program Files\Voltage Security\Voltage SecureMail, flags 0x4022, rc 0
145 52209 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\Voltage Security\Voltage SecureMail)
53 52262 [main] run 14276 symlink_info::check: not a symlink
62 52324 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\Voltage Security\Voltage SecureMail, 0x223998) (0x804022)
35 52359 [main] run 14276 path_conv::check: this->path(C:\Program Files\Voltage Security\Voltage SecureMail), has_acls(1)
36 52395 [main] run 14276 normalize_posix_path: src /c/Program Files/Common Files/Voltage Security
31 52426 [main] run 14276 normalize_posix_path: /c/Program Files/Common Files/Voltage Security = normalize_posix_path (/c/Program Files/Common Files/Voltage Security)
32 52458 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/Common Files/Voltage Security)
33 52491 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/Common Files/Voltage Security', dst 'C:\Program Files\Common Files\Voltage Security'
31 52522 [main] run 14276 set_flags: flags: binary (0x2)
34 52556 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/Common Files/Voltage Security, dst C:\Program Files\Common Files\Voltage Security, flags 0x4022, rc 0
130 52686 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\Common Files\Voltage Security)
49 52735 [main] run 14276 symlink_info::check: not a symlink
61 52796 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\Common Files\Voltage Security, 0x223998) (0x804022)
34 52830 [main] run 14276 path_conv::check: this->path(C:\Program Files\Common Files\Voltage Security), has_acls(1)
36 52866 [main] run 14276 normalize_posix_path: src /c/users/dk068x/frameworks/phantomjs-1.9.0-windows
34 52900 [main] run 14276 normalize_posix_path: /c/users/dk068x/frameworks/phantomjs-1.9.0-windows = normalize_posix_path (/c/users/dk068x/frameworks/phantomjs-1.9.0-windows)
32 52932 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/users/dk068x/frameworks/phantomjs-1.9.0-windows)
33 52965 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/users/dk068x/frameworks/phantomjs-1.9.0-windows', dst 'C:\users\dk068x\frameworks\phantomjs-1.9.0-windows'
32 52997 [main] run 14276 set_flags: flags: binary (0x2)
30 53027 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/users/dk068x/frameworks/phantomjs-1.9.0-windows, dst C:\users\dk068x\frameworks\phantomjs-1.9.0-windows, flags 0x4022, rc 0
121 53148 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\users\dk068x\frameworks\phantomjs-1.9.0-windows)
67 53215 [main] run 14276 symlink_info::check: not a symlink
68 53283 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\users\dk068x\frameworks\phantomjs-1.9.0-windows, 0x223998) (0x804022)
36 53319 [main] run 14276 path_conv::check: this->path(C:\users\dk068x\frameworks\phantomjs-1.9.0-windows), has_acls(1)
37 53356 [main] run 14276 normalize_posix_path: src /c/eclipse/Groovy/Groovy-2.1.7/bin
32 53388 [main] run 14276 normalize_posix_path: /c/eclipse/Groovy/Groovy-2.1.7/bin = normalize_posix_path (/c/eclipse/Groovy/Groovy-2.1.7/bin)
32 53420 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/eclipse/Groovy/Groovy-2.1.7/bin)
33 53453 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/eclipse/Groovy/Groovy-2.1.7/bin', dst 'C:\eclipse\Groovy\Groovy-2.1.7\bin'
32 53485 [main] run 14276 set_flags: flags: binary (0x2)
31 53516 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/eclipse/Groovy/Groovy-2.1.7/bin, dst C:\eclipse\Groovy\Groovy-2.1.7\bin, flags 0x4022, rc 0
124 53640 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\eclipse\Groovy\Groovy-2.1.7\bin)
115 53755 [main] run 14276 symlink_info::check: not a symlink
69 53824 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\eclipse\Groovy\Groovy-2.1.7\bin, 0x223998) (0x804022)
36 53860 [main] run 14276 path_conv::check: this->path(C:\eclipse\Groovy\Groovy-2.1.7\bin), has_acls(1)
39 53899 [main] run 14276 normalize_posix_path: src /c/Program Files/ATT Connect/OutlookAddin/Outlook
35 53934 [main] run 14276 normalize_posix_path: /c/Program Files/ATT Connect/OutlookAddin/Outlook = normalize_posix_path (/c/Program Files/ATT Connect/OutlookAddin/Outlook)
33 53967 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Program Files/ATT Connect/OutlookAddin/Outlook)
33 54000 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Program Files/ATT Connect/OutlookAddin/Outlook', dst 'C:\Program Files\ATT Connect\OutlookAddin\Outlook'
33 54033 [main] run 14276 set_flags: flags: binary (0x2)
31 54064 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Program Files/ATT Connect/OutlookAddin/Outlook, dst C:\Program Files\ATT Connect\OutlookAddin\Outlook, flags 0x4022, rc 0
151 54215 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Program Files\ATT Connect\OutlookAddin\Outlook)
56 54271 [main] run 14276 symlink_info::check: not a symlink
69 54340 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Program Files\ATT Connect\OutlookAddin\Outlook, 0x223998) (0x804022)
35 54375 [main] run 14276 path_conv::check: this->path(C:\Program Files\ATT Connect\OutlookAddin\Outlook), has_acls(1)
37 54412 [main] run 14276 normalize_posix_path: src /c/Users/dk068x/frameworks/sonar-runner-2.3/bin
31 54443 [main] run 14276 normalize_posix_path: /c/Users/dk068x/frameworks/sonar-runner-2.3/bin = normalize_posix_path (/c/Users/dk068x/frameworks/sonar-runner-2.3/bin)
32 54475 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Users/dk068x/frameworks/sonar-runner-2.3/bin)
32 54507 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Users/dk068x/frameworks/sonar-runner-2.3/bin', dst 'C:\Users\dk068x\frameworks\sonar-runner-2.3\bin'
32 54539 [main] run 14276 set_flags: flags: binary (0x2)
30 54569 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Users/dk068x/frameworks/sonar-runner-2.3/bin, dst C:\Users\dk068x\frameworks\sonar-runner-2.3\bin, flags 0x4022, rc 0
133 54702 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Users\dk068x\frameworks\sonar-runner-2.3\bin)
49 54751 [main] run 14276 symlink_info::check: not a symlink
59 54810 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Users\dk068x\frameworks\sonar-runner-2.3\bin, 0x223998) (0x804022)
34 54844 [main] run 14276 path_conv::check: this->path(C:\Users\dk068x\frameworks\sonar-runner-2.3\bin), has_acls(1)
72 54916 [main] run 14276 normalize_posix_path: src /c/Users/dk068x/AppData/Roaming/npm
49 54965 [main] run 14276 normalize_posix_path: /c/Users/dk068x/AppData/Roaming/npm = normalize_posix_path (/c/Users/dk068x/AppData/Roaming/npm)
39 55004 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Users/dk068x/AppData/Roaming/npm)
70 55074 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Users/dk068x/AppData/Roaming/npm', dst 'C:\Users\dk068x\AppData\Roaming\npm'
94 55168 [main] run 14276 set_flags: flags: binary (0x2)
95 55263 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Users/dk068x/AppData/Roaming/npm, dst C:\Users\dk068x\AppData\Roaming\npm, flags 0x4022, rc 0
196 55459 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Users\dk068x\AppData\Roaming\npm)
109 55568 [main] run 14276 symlink_info::check: not a symlink
119 55687 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Users\dk068x\AppData\Roaming\npm, 0x223998) (0x804022)
63 55750 [main] run 14276 path_conv::check: this->path(C:\Users\dk068x\AppData\Roaming\npm), has_acls(1)
61 55811 [main] run 14276 normalize_posix_path: src /usr/bin
52 55863 [main] run 14276 normalize_posix_path: /usr/bin = normalize_posix_path (/usr/bin)
58 55921 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/usr/bin)
39 55960 [main] run 14276 mount_info::cygdrive_win32_path: src '/usr/bin', dst ''
38 55998 [main] run 14276 set_flags: flags: binary (0x2)
35 56033 [main] run 14276 mount_info::conv_to_win32_path: src_path /usr/bin, dst C:\Cygwin\bin, flags 0x2000A, rc 0
135 56168 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Cygwin\bin)
51 56219 [main] run 14276 symlink_info::check: not a symlink
63 56282 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Cygwin\bin, 0x223998) (0x82000A)
34 56316 [main] run 14276 path_conv::check: this->path(C:\Cygwin\bin), has_acls(1)
84 56400 [main] run 14276 win_env::add_cache: posix /c/Program Files/Voltage Security/Voltage SecureFile:/c/Program Files/CollabNet/Subversion Client:/c/Program Files/RSA SecurID Token Common:/c/Windows/system32:/c/Windows:/c/Windows/System32/Wbem:/c/Windows/System32/WindowsPowerShell/v1.0:/c/Program Files/Enterprise Vault/EVClient:/c/Program Files/Code Collaborator Client:/c/Program Files/nodejs:/c/Program Files/Voltage Security/Voltage SecureMail:/c/Program Files/Common Files/Voltage Security:/c/users/dk068x/frameworks/phantomjs-1.9.0-windows:/c/eclipse/Groovy/Groovy-2.1.7/bin:/c/Program Files/ATT Connect/OutlookAddin/Outlook:/c/Users/dk068x/frameworks/sonar-runner-2.3/bin:/c/Users/dk068x/AppData/Roaming/npm:/usr/bin
39 56439 [main] run 14276 win_env::add_cache: native PATH=C:\Program Files\Voltage Security\Voltage SecureFile;C:\Program Files\CollabNet\Subversion Client;C:\Program Files\RSA SecurID Token Common;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0;C:\Program Files\Enterprise Vault\EVClient;C:\Program Files\Code Collaborator Client;C:\Program Files\nodejs;C:\Program Files\Voltage Security\Voltage SecureMail;C:\Program Files\Common Files\Voltage Security;C:\users\dk068x\frameworks\phantomjs-1.9.0-windows;C:\eclipse\Groovy\Groovy-2.1.7\bin;C:\Program Files\ATT Connect\OutlookAddin\Outlook;C:\Users\dk068x\frameworks\sonar-runner-2.3\bin;C:\Users\dk068x\AppData\Roaming\npm;C:\Cygwin\bin
61 56500 [main] run 14276 normalize_posix_path: src /usr/bin
31 56531 [main] run 14276 normalize_posix_path: /usr/bin = normalize_posix_path (/usr/bin)
30 56561 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/usr/bin)
32 56593 [main] run 14276 mount_info::cygdrive_win32_path: src '/usr/bin', dst ''
32 56625 [main] run 14276 set_flags: flags: binary (0x2)
30 56655 [main] run 14276 mount_info::conv_to_win32_path: src_path /usr/bin, dst C:\Cygwin\bin, flags 0x2000A, rc 0
122 56777 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Cygwin\bin)
49 56826 [main] run 14276 symlink_info::check: not a symlink
64 56890 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Cygwin\bin, 0x223BA8) (0x82000A)
51 56941 [main] run 14276 path_conv::check: this->path(C:\Cygwin\bin), has_acls(1)
247 57188 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (C:\Cygwin\bin, keep-rel, no-add-slash)
34 57222 [main] run 14276 normalize_win32_path: C:\Cygwin\bin = normalize_win32_path (C:\Cygwin\bin)
32 57254 [main] run 14276 mount_info::conv_to_posix_path: /usr/bin = conv_to_posix_path (C:\Cygwin\bin)
294 57548 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (./bash.exe, keep-rel, no-add-slash)
31 57579 [main] run 14276 mount_info::conv_to_posix_path: ./bash.exe = conv_to_posix_path (./bash.exe)
48 57627 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (./bash.exe, keep-rel, no-add-slash)
31 57658 [main] run 14276 mount_info::conv_to_posix_path: ./bash.exe = conv_to_posix_path (./bash.exe)
263 57921 [main] run 14276 open: open(./bash.exe, 0x10000)
47 57968 [main] run 14276 normalize_posix_path: src ./bash.exe
32 58000 [main] run 14276 cwdstuff::get: posix /c/Users/dk068x
31 58031 [main] run 14276 cwdstuff::get: (/c/Users/dk068x) = cwdstuff::get (0x20000008, 32768, 1, 0), errno 0
32 58063 [main] run 14276 normalize_posix_path: /c/Users/dk068x/bash.exe = normalize_posix_path (./bash.exe)
33 58096 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Users/dk068x/bash.exe)
45 58141 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Users/dk068x/bash.exe', dst 'C:\Users\dk068x\bash.exe'
33 58174 [main] run 14276 set_flags: flags: binary (0x2)
31 58205 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Users/dk068x/bash.exe, dst C:\Users\dk068x\bash.exe, flags 0x4022, rc 0
119 58324 [main] run 14276 symlink_info::check: 0xC0000034 = NtCreateFile (\??\C:\Users\dk068x\bash.exe)
36 58360 [main] run 14276 symlink_info::check: 0xC0000034 = NtQueryInformationFile (\??\C:\Users\dk068x\bash.exe)
97 58457 [main] run 14276 symlink_info::check: 0xC0000034 = NtCreateFile (\??\C:\Users\dk068x\bash.exe.lnk)
36 58493 [main] run 14276 symlink_info::check: 0xC0000034 = NtQueryInformationFile (\??\C:\Users\dk068x\bash.exe.lnk)
32 58525 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Users\dk068x\bash.exe, 0x223B38) (0x4022)
32 58557 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/c/Users/dk068x)
32 58589 [main] run 14276 mount_info::cygdrive_win32_path: src '/c/Users/dk068x', dst 'C:\Users\dk068x'
31 58620 [main] run 14276 set_flags: flags: binary (0x2)
30 58650 [main] run 14276 mount_info::conv_to_win32_path: src_path /c/Users/dk068x, dst C:\Users\dk068x, flags 0x4022, rc 0
121 58771 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Users\dk068x)
50 58821 [main] run 14276 symlink_info::check: not a symlink
66 58887 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Users\dk068x, 0x223B38) (0x4022)
37 58924 [main] run 14276 path_conv::check: this->path(C:\Users\dk068x\bash.exe), has_acls(1)
37 58961 [main] run 14276 build_fh_pc: fh 0x612A4AC4, dev 000000C3
37 58998 [main] run 14276 fhandler_base::open: (\??\C:\Users\dk068x\bash.exe, 0x110000)
103 59101 [main] run 14276 seterrno_from_nt_status: /home/corinna/src/cygwin/cygwin-1.7.25/32/cygwin-1.7.25-1/src/src/winsup/cygwin/fhandler.cc:647 status 0xC0000034 -> windows error 2
41 59142 [main] run 14276 geterrno_from_win_error: windows error 2 == errno 2
34 59176 [main] run 14276 fhandler_base::open: 0xC0000034 = NtCreateFile (0x0, 0x80100000, \??\C:\Users\dk068x\bash.exe, io, NULL, 0x0, 0x7, 0x1, 0x4020, NULL, 0)
34 59210 [main] run 14276 fhandler_base::open: 0 = fhandler_base::open(\??\C:\Users\dk068x\bash.exe, 0x110000)
31 59241 [main] run 14276 fhandler_base::open_fs: 0 = fhandler_disk_file::open(\??\C:\Users\dk068x\bash.exe, 0x10000)
8058 67299 [main] run 14276 open: -1 = open(./bash.exe, 0x10000), errno 2
1242 68541 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (/usr/bin/bash.exe, keep-rel, no-add-slash)
73 68614 [main] run 14276 normalize_win32_path: \usr\bin\bash.exe = normalize_win32_path (/usr/bin/bash.exe)
52 68666 [main] run 14276 mount_info::conv_to_posix_path: /usr/bin/bash.exe = conv_to_posix_path (/usr/bin/bash.exe)
81 68747 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (/usr/bin/bash.exe, keep-rel, no-add-slash)
35 68782 [main] run 14276 normalize_win32_path: \usr\bin\bash.exe = normalize_win32_path (/usr/bin/bash.exe)
32 68814 [main] run 14276 mount_info::conv_to_posix_path: /usr/bin/bash.exe = conv_to_posix_path (/usr/bin/bash.exe)
373 69187 [main] run 14276 open: open(/usr/bin/bash.exe, 0x10000)
38 69225 [main] run 14276 normalize_posix_path: src /usr/bin/bash.exe
37 69262 [main] run 14276 normalize_posix_path: /usr/bin/bash.exe = normalize_posix_path (/usr/bin/bash.exe)
36 69298 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/usr/bin/bash.exe)
32 69330 [main] run 14276 mount_info::cygdrive_win32_path: src '/usr/bin/bash.exe', dst ''
32 69362 [main] run 14276 set_flags: flags: binary (0x2)
32 69394 [main] run 14276 mount_info::conv_to_win32_path: src_path /usr/bin/bash.exe, dst C:\Cygwin\bin\bash.exe, flags 0x2000A, rc 0
183 69577 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Cygwin\bin\bash.exe)
56 69633 [main] run 14276 symlink_info::check: not a symlink
70 69703 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Cygwin\bin\bash.exe, 0x223B38) (0x2000A)
35 69738 [main] run 14276 path_conv::check: this->path(C:\Cygwin\bin\bash.exe), has_acls(1)
37 69775 [main] run 14276 build_fh_pc: fh 0x612A4AC4, dev 000000C3
34 69809 [main] run 14276 fhandler_base::open: (\??\C:\Cygwin\bin\bash.exe, 0x110000)
225 70034 [main] run 14276 fhandler_base::set_flags: flags 0x110000, supplied_bin 0x10000
57 70091 [main] run 14276 fhandler_base::set_flags: O_TEXT/O_BINARY set in flags 0x10000
41 70132 [main] run 14276 fhandler_base::set_flags: filemode set to binary
66 70198 [main] run 14276 fhandler_base::open: 0x0 = NtCreateFile (0xE8, 0x80100000, \??\C:\Cygwin\bin\bash.exe, io, NULL, 0x0, 0x7, 0x1, 0x4020, NULL, 0)
44 70242 [main] run 14276 fhandler_base::open: 1 = fhandler_base::open(\??\C:\Cygwin\bin\bash.exe, 0x110000)
78 70320 [main] run 14276 fhandler_base::open_fs: 1 = fhandler_disk_file::open(\??\C:\Cygwin\bin\bash.exe, 0x10000)
41 70361 [main] run 14276 open: 0 = open(/usr/bin/bash.exe, 0x10000)
138 70499 [main] run 14276 _cygwin_istext_for_stdio: fd 0: opened as binary
390 70889 [main] run 14276 close: close(0)
72 70961 [main] run 14276 fhandler_base::close: closing '/usr/bin/bash.exe' handle 0xE8
84 71045 [main] run 14276 close: 0 = close(0)
316 71361 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (/usr/bin/bash.exe, keep-rel, no-add-slash)
33 71394 [main] run 14276 normalize_win32_path: \usr\bin\bash.exe = normalize_win32_path (/usr/bin/bash.exe)
33 71427 [main] run 14276 mount_info::conv_to_posix_path: /usr/bin/bash.exe = conv_to_posix_path (/usr/bin/bash.exe)
49 71476 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (/usr/bin/bash.exe, keep-rel, no-add-slash)
31 71507 [main] run 14276 normalize_win32_path: \usr\bin\bash.exe = normalize_win32_path (/usr/bin/bash.exe)
31 71538 [main] run 14276 mount_info::conv_to_posix_path: /usr/bin/bash.exe = conv_to_posix_path (/usr/bin/bash.exe)
169 71707 [main] run 14276 open: open(/usr/bin/bash.exe, 0x10000)
31 71738 [main] run 14276 normalize_posix_path: src /usr/bin/bash.exe
32 71770 [main] run 14276 normalize_posix_path: /usr/bin/bash.exe = normalize_posix_path (/usr/bin/bash.exe)
31 71801 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/usr/bin/bash.exe)
31 71832 [main] run 14276 mount_info::cygdrive_win32_path: src '/usr/bin/bash.exe', dst ''
32 71864 [main] run 14276 set_flags: flags: binary (0x2)
34 71898 [main] run 14276 mount_info::conv_to_win32_path: src_path /usr/bin/bash.exe, dst C:\Cygwin\bin\bash.exe, flags 0x2000A, rc 0
139 72037 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Cygwin\bin\bash.exe)
51 72088 [main] run 14276 symlink_info::check: not a symlink
64 72152 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Cygwin\bin\bash.exe, 0x223B78) (0x2000A)
34 72186 [main] run 14276 path_conv::check: this->path(C:\Cygwin\bin\bash.exe), has_acls(1)
36 72222 [main] run 14276 build_fh_pc: fh 0x612A4AC4, dev 000000C3
33 72255 [main] run 14276 fhandler_base::open: (\??\C:\Cygwin\bin\bash.exe, 0x110000)
174 72429 [main] run 14276 fhandler_base::set_flags: flags 0x110000, supplied_bin 0x10000
40 72469 [main] run 14276 fhandler_base::set_flags: O_TEXT/O_BINARY set in flags 0x10000
36 72505 [main] run 14276 fhandler_base::set_flags: filemode set to binary
31 72536 [main] run 14276 fhandler_base::open: 0x0 = NtCreateFile (0xEC, 0x80100000, \??\C:\Cygwin\bin\bash.exe, io, NULL, 0x0, 0x7, 0x1, 0x4020, NULL, 0)
34 72570 [main] run 14276 fhandler_base::open: 1 = fhandler_base::open(\??\C:\Cygwin\bin\bash.exe, 0x110000)
40 72610 [main] run 14276 fhandler_base::open_fs: 1 = fhandler_disk_file::open(\??\C:\Cygwin\bin\bash.exe, 0x10000)
34 72644 [main] run 14276 open: 0 = open(/usr/bin/bash.exe, 0x10000)
139 72783 [main] run 14276 _cygwin_istext_for_stdio: fd 0: opened as binary
315 73098 [main] run 14276 close: close(0)
36 73134 [main] run 14276 fhandler_base::close: closing '/usr/bin/bash.exe' handle 0xEC
72 73206 [main] run 14276 close: 0 = close(0)
242 73448 [main] run 14276 mount_info::conv_to_posix_path: conv_to_posix_path (/usr/bin/bash.exe, keep-rel, no-add-slash)
32 73480 [main] run 14276 normalize_win32_path: \usr\bin\bash.exe = normalize_win32_path (/usr/bin/bash.exe)
31 73511 [main] run 14276 mount_info::conv_to_posix_path: /usr/bin/bash.exe = conv_to_posix_path (/usr/bin/bash.exe)
41 73552 [main] run 14276 lstat64: entering
37 73589 [main] run 14276 normalize_posix_path: src /usr/bin/bash.exe
31 73620 [main] run 14276 normalize_posix_path: /usr/bin/bash.exe = normalize_posix_path (/usr/bin/bash.exe)
31 73651 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/usr/bin/bash.exe)
32 73683 [main] run 14276 mount_info::cygdrive_win32_path: src '/usr/bin/bash.exe', dst ''
30 73713 [main] run 14276 set_flags: flags: binary (0x2)
31 73744 [main] run 14276 mount_info::conv_to_win32_path: src_path /usr/bin/bash.exe, dst C:\Cygwin\bin\bash.exe, flags 0x2000A, rc 0
125 73869 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Cygwin\bin\bash.exe)
79 73948 [main] run 14276 symlink_info::check: not a symlink
51 73999 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Cygwin\bin\bash.exe, 0x223D78) (0x42000A)
38 74037 [main] run 14276 path_conv::check: this->path(C:\Cygwin\bin\bash.exe), has_acls(1)
48 74085 [main] run 14276 build_fh_pc: fh 0x612A4AC4, dev 000000C3
34 74119 [main] run 14276 stat_worker: (\??\C:\Cygwin\bin\bash.exe, 0x224F88, 0x612A4AC4), file_attributes 32
111 74230 [main] run 14276 cygpsid::debug_print: get_sids_info: owner SID = S-1-5-21-2057499049-1289676208-1959431660-1944941
34 74264 [main] run 14276 cygpsid::debug_print: get_sids_info: group SID = S-1-5-21-2057499049-1289676208-1959431660-513
33 74297 [main] run 14276 get_info_from_sd: ACL 0x0, uid 1954941, gid 10513
51 74348 [main] run 14276 fhandler_base::fstat_helper: 0 = fstat (\??\C:\Cygwin\bin\bash.exe, 0x224F88) st_size=536078, st_mode=0x8000, st_ino=281474978076309st_atim=50E4A976.284FFF88 st_ctim=50E4A976.284FFF88 st_mtim=4D6834C8.F4240 st_birthtim=50E4A976.284FFF88
39 74387 [main] run 14276 stat_worker: 0 = (\??\C:\Cygwin\bin\bash.exe,0x224F88)
69 74456 [main] run 14276 normalize_posix_path: src /usr/bin/bash.exe
33 74489 [main] run 14276 normalize_posix_path: /usr/bin/bash.exe = normalize_posix_path (/usr/bin/bash.exe)
31 74520 [main] run 14276 mount_info::conv_to_win32_path: conv_to_win32_path (/usr/bin/bash.exe)
32 74552 [main] run 14276 mount_info::cygdrive_win32_path: src '/usr/bin/bash.exe', dst ''
30 74582 [main] run 14276 set_flags: flags: binary (0x2)
31 74613 [main] run 14276 mount_info::conv_to_win32_path: src_path /usr/bin/bash.exe, dst C:\Cygwin\bin\bash.exe, flags 0x2000A, rc 0
134 74747 [main] run 14276 symlink_info::check: 0x0 = NtCreateFile (\??\C:\Cygwin\bin\bash.exe)
51 74798 [main] run 14276 symlink_info::check: not a symlink
62 74860 [main] run 14276 symlink_info::check: 0 = symlink.check(C:\Cygwin\bin\bash.exe, 0x223C58) (0x82000A)
41 74901 [main] run 14276 path_conv::check: this->path(C:\Cygwin\bin\bash.exe), has_acls(1)
111325 186226 [main] run 14276 set_signal_mask: setmask 0, newmask FFFEFEDF, mask_bits 0
58 186284 [main] run 14276 kill0: kill (14276, 6)
57 186341 [main] run 14276 sig_send: sendsig 0x80, pid 14276, signal 6, its_me 1
52 186393 [main] run 14276 sig_send: wakeup 0xF8
76 186469 [main] run 14276 sig_send: Waiting for pack.wakeup 0xF8
41 186510 [sig] run 14276 sigpacket::process: signal 6 processing
44 186554 [sig] run 14276 init_cygheap::find_tls: sig 6
34 186588 [sig] run 14276 sigpacket::process: using tls 0x22CE64
62 186650 [sig] run 14276 sigpacket::process: signal 6, signal handler 0x6102EEA0
32 186682 [sig] run 14276 sigpacket::setup_handler: controlled interrupt. stackptr 0x22DA1C, stack 0x22DA18, stackptr[-1] 0x402B8D
41 186723 [sig] run 14276 proc_subproc: args: 5, 1
32 186755 [sig] run 14276 proc_subproc: clear waiting threads
30 186785 [sig] run 14276 proc_subproc: finished clearing
31 186816 [sig] run 14276 proc_subproc: returning 1
31 186847 [sig] run 14276 _cygtls::interrupt_setup: armed signal_arrived 0xF4, signal 6
32 186879 [sig] run 14276 sigpacket::setup_handler: signal 6 delivered
41 186920 [sig] run 14276 sigpacket::process: returning 1
39 186959 [sig] run 14276 wait_sig: signalling pack.wakeup 0xF8
38 186997 [main] run 14276 set_process_mask_delta: oldmask FFFEFEDF, newmask FFFEFEDF, deltamask 0
35 187032 [main] run 14276 signal_exit: exiting due to signal 6
32 187064 [main] run 14276 try_to_debug: debugger_command ''
385 187449 [main] run 14276 open_stackdumpfile: Dumping stack trace to run.exe.stackdump
--- Process 14276, exception c0000005 at 6102E531
2886 190335 [main] run 14276 signal_exit: about to call do_exit (86)
54 190389 [main] run 14276 do_exit: do_exit (134), exit_state 2
38 190427 [main] run 14276 void: 0x0 = signal (20, 0x1)
34 190461 [main] run 14276 void: 0x0 = signal (1, 0x1)
33 190494 [main] run 14276 void: 0x0 = signal (2, 0x1)
33 190527 [main] run 14276 void: 0x0 = signal (3, 0x1)
41 190568 [main] run 14276 fhandler_base::close: closing '/c/Users/dk068x/strace.log' handle 0x50
44 190612 [main] run 14276 getpid: 14276 = getpid()
33 190645 [main] run 14276 proc_terminate: nprocs 0
33 190678 [main] run 14276 proc_terminate: leaving
38 190716 [main] run 14276 pinfo::exit: Calling ExitProcess n 0x86, exitcode 0x8600
[-- Attachment #3: Type: text/plain, Size: 218 bytes --]
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Emacs doesn't start from icon after update to 1.7.25 [attn: Chuck]
2013-09-25 19:25 ` KARR, DAVID
@ 2013-09-25 19:45 ` Charles Wilson
2013-09-30 8:18 ` KARR, DAVID
2013-10-29 10:05 ` KARR, DAVID
0 siblings, 2 replies; 12+ messages in thread
From: Charles Wilson @ 2013-09-25 19:45 UTC (permalink / raw)
To: The Cygwin Mailing List
On 9/25/2013 2:36 PM, KARR, DAVID wrote:
>> Looks fine. I'm out of ideas. Maybe Chuck (the run and run2
>> maintainer) can help you if you want to pursue this.
>
> Anyone else (Chuck?) have any ideas on this? As I can't open Emacs
> from the shortcut anymore, my current workaround is opening an rxvt
> window and running emacs from there.
>
> If it matters, I tried taking my shortcut's command line and altering
> it like this:
>
> c:\cygwin\bin\strace.exe -f C:\Cygwin\bin\run.exe -p /usr/bin bash -l
> -i -c "emacs -display 127.0.0.1:0.0 --debug-init" > strace.log
>
> I'm attaching that strace.log file. I looked at it, and I didn't see
> anything obvious. I still chuckle over the reference to
> "/home/corinna", but I'm pretty sure that has nothing to do with
> this.
I saw this, but haven't had time to investigate. It's at the top of the
list, right after finishing the port/respin of inetutils-1.9 for 32bit
and 64bit cygwin.
--
Chuck
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: Emacs doesn't start from icon after update to 1.7.25 [attn: Chuck]
2013-09-25 19:45 ` Charles Wilson
@ 2013-09-30 8:18 ` KARR, DAVID
2013-10-29 10:05 ` KARR, DAVID
1 sibling, 0 replies; 12+ messages in thread
From: KARR, DAVID @ 2013-09-30 8:18 UTC (permalink / raw)
To: The Cygwin Mailing List
> -----Original Message-----
> Sent: Wednesday, September 25, 2013 12:25 PM
> Subject: Re: Emacs doesn't start from icon after update to 1.7.25 [attn:
> Chuck]
>
> On 9/25/2013 2:36 PM, KARR, DAVID wrote:
> >> Looks fine. I'm out of ideas. Maybe Chuck (the run and run2
> >> maintainer) can help you if you want to pursue this.
> >
> > Anyone else (Chuck?) have any ideas on this? As I can't open Emacs
> > from the shortcut anymore, my current workaround is opening an rxvt
> > window and running emacs from there.
> >
> > If it matters, I tried taking my shortcut's command line and altering
> > it like this:
> >
> > c:\cygwin\bin\strace.exe -f C:\Cygwin\bin\run.exe -p /usr/bin bash -l
> > -i -c "emacs -display 127.0.0.1:0.0 --debug-init" > strace.log
> >
> > I'm attaching that strace.log file. I looked at it, and I didn't see
> > anything obvious. I still chuckle over the reference to
> > "/home/corinna", but I'm pretty sure that has nothing to do with
> > this.
>
> I saw this, but haven't had time to investigate. It's at the top of the
> list, right after finishing the port/respin of inetutils-1.9 for 32bit
> and 64bit cygwin.
By the way, if it matters, I realized this is also happening on my other laptop, which is also Win7x32, and similar hardware.
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* RE: Emacs doesn't start from icon after update to 1.7.25 [attn: Chuck]
2013-09-25 19:45 ` Charles Wilson
2013-09-30 8:18 ` KARR, DAVID
@ 2013-10-29 10:05 ` KARR, DAVID
2013-10-30 12:54 ` Charles Wilson
1 sibling, 1 reply; 12+ messages in thread
From: KARR, DAVID @ 2013-10-29 10:05 UTC (permalink / raw)
To: The Cygwin Mailing List
> -----Original Message-----
> Sent: Wednesday, September 25, 2013 12:25 PM
> To: The Cygwin Mailing List
> Subject: Re: Emacs doesn't start from icon after update to 1.7.25 [attn:
> Chuck]
>
> On 9/25/2013 2:36 PM, KARR, DAVID wrote:
> >> Looks fine. I'm out of ideas. Maybe Chuck (the run and run2
> >> maintainer) can help you if you want to pursue this.
> >
> > Anyone else (Chuck?) have any ideas on this? As I can't open Emacs
> > from the shortcut anymore, my current workaround is opening an rxvt
> > window and running emacs from there.
> >
> > If it matters, I tried taking my shortcut's command line and altering
> > it like this:
> >
> > c:\cygwin\bin\strace.exe -f C:\Cygwin\bin\run.exe -p /usr/bin bash -l
> > -i -c "emacs -display 127.0.0.1:0.0 --debug-init" > strace.log
> >
> > I'm attaching that strace.log file. I looked at it, and I didn't see
> > anything obvious. I still chuckle over the reference to
> > "/home/corinna", but I'm pretty sure that has nothing to do with
> > this.
>
> I saw this, but haven't had time to investigate. It's at the top of the
> list, right after finishing the port/respin of inetutils-1.9 for 32bit
> and 64bit cygwin.
Just checking for status. Is this still pending investigation?
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Emacs doesn't start from icon after update to 1.7.25 [attn: Chuck]
2013-10-29 10:05 ` KARR, DAVID
@ 2013-10-30 12:54 ` Charles Wilson
0 siblings, 0 replies; 12+ messages in thread
From: Charles Wilson @ 2013-10-30 12:54 UTC (permalink / raw)
To: The Cygwin Mailing List
On 10/28/2013 4:25 PM, KARR, DAVID wrote:
>> I saw this, but haven't had time to investigate. It's at the top of the
>> list, right after finishing the port/respin of inetutils-1.9 for 32bit
>> and 64bit cygwin.
>
> Just checking for status. Is this still pending investigation?
Yes -- it is still "pending" (that is, not yet done), but thanks for the
reminder. I'm about ready to publish the 32- and 64- bit updates for
inetutils, so that's next.
--
Chuck
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2013-10-30 12:51 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-09-20 23:36 Emacs doesn't start from icon after update to 1.7.25 KARR, DAVID
2013-09-21 8:18 ` Ken Brown
2013-09-22 1:00 ` KARR, DAVID
[not found] ` <B8D164BED956C5439875951895CB4B2211449D8D@WABOTH9MSGUSR8C.ITServices.sbc.com>
2013-09-22 15:56 ` Ken Brown
[not found] ` <B8D164BED956C5439875951895CB4B221145859C@WABOTH9MSGUSR8C.ITServices.sbc.com>
2013-09-22 21:31 ` Ken Brown
[not found] ` <B8D164BED956C5439875951895CB4B221145A879@WABOTH9MSGUSR8C.ITServices.sbc.com>
2013-09-23 13:16 ` Ken Brown
[not found] ` <B8D164BED956C5439875951895CB4B2211466D4F@WABOTH9MSGUSR8C.ITServices.sbc.com>
2013-09-23 15:05 ` Emacs doesn't start from icon after update to 1.7.25 [attn: Chuck] Ken Brown
2013-09-25 19:25 ` KARR, DAVID
2013-09-25 19:45 ` Charles Wilson
2013-09-30 8:18 ` KARR, DAVID
2013-10-29 10:05 ` KARR, DAVID
2013-10-30 12:54 ` Charles Wilson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).