* dig and host not returning output in bind-utils-9.10.2-1
@ 2015-06-19 20:24 Keith Christian
2015-06-19 21:36 ` Yaakov Selkowitz
0 siblings, 1 reply; 3+ messages in thread
From: Keith Christian @ 2015-06-19 20:24 UTC (permalink / raw)
To: cygwin
Tried to continue the previous thread but large attachments destroyed
the thread.
Updated to bind-utils-9.10.2-1 and neither dig nor host returns
output. There is a pause of about 0.7 seconds while dig runs.
Strace shows quite a bit of dig activity but nothing returned.
Anyone else having this issue?
Fri 06/19/2015 14:12:26.07 c:\users\keith>c:\cygwin\bin\bash.exe -c "uname -a"
CYGWIN_NT-6.1-WOW north-division 2.0.4(0.287/5/3) 2015-06-09 12:20 i686 Cygwin
Fri 06/19/2015 14:12:28.88 c:\users\keith>c:\cygwin\bin\bash.exe -c "echo hello"
hello
Fri 06/19/2015 14:12:31.11 c:\users\keith>c:\cygwin\bin\bash.exe -c
"dig google.com"
Fri 06/19/2015 14:12:42.31 c:\users\keith>c:\cygwin\bin\bash.exe -c
"/bin/dig.exe google.com"
Fri 06/19/2015 14:12:46.32 c:\users\keith>
Fri 06/19/2015 14:12:46.32 c:\users\keith>nslookup google.com
Server: ns01.northdivision.f0ocorp.com
Address: www.xxx.yyy.zzz
Non-authoritative answer:
Name: google.com
Addresses: 2607:f8b0:400f:803::200e
216.58.217.46
I have removed and reinstalled bind-9.10.2-1 and bind-utils-9.10.2-1,
rebooted, no success. I also verified that dig and host had been
removed by attempting to execut
e them after removal, got -bash: dig: command not found so I know it
was positively removed.
Ideas?
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: dig and host not returning output in bind-utils-9.10.2-1
2015-06-19 20:24 dig and host not returning output in bind-utils-9.10.2-1 Keith Christian
@ 2015-06-19 21:36 ` Yaakov Selkowitz
2015-06-19 23:57 ` Keith Christian
0 siblings, 1 reply; 3+ messages in thread
From: Yaakov Selkowitz @ 2015-06-19 21:36 UTC (permalink / raw)
To: cygwin
On Fri, 2015-06-19 at 14:24 -0600, Keith Christian wrote:
> Updated to bind-utils-9.10.2-1 and neither dig nor host returns
> output. There is a pause of about 0.7 seconds while dig runs.
>
> Strace shows quite a bit of dig activity but nothing returned.
>
> Anyone else having this issue?
WFM. If you have an /etc/resolv.conf, try removing it. Otherwise,
check for BLODA or firewall settings?
--
Yaakov
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: dig and host not returning output in bind-utils-9.10.2-1
2015-06-19 21:36 ` Yaakov Selkowitz
@ 2015-06-19 23:57 ` Keith Christian
0 siblings, 0 replies; 3+ messages in thread
From: Keith Christian @ 2015-06-19 23:57 UTC (permalink / raw)
To: cygwin
On Fri, Jun 19, 2015 at 3:36 PM, Yaakov Selkowitz <yselkowitz@cygwin.com> wrote:
> On Fri, 2015-06-19 at 14:24 -0600, Keith Christian wrote:
>> Updated to bind-utils-9.10.2-1 and neither dig nor host returns
>> output. There is a pause of about 0.7 seconds while dig runs.
>>
>> Strace shows quite a bit of dig activity but nothing returned.
>>
>> Anyone else having this issue?
>
> WFM. If you have an /etc/resolv.conf, try removing it. Otherwise,
> check for BLODA or firewall settings?
>
> --
> Yaakov
Thanks for the reply, Yakkov.
No /etc/resolv.conf on the machine exists.
nmap -sL resolves without issues as does nslookup under CMD.EXE.
Dig and Host were working until this recent update. Would an strace
be of any help?
Keith
--
Problem reports: http://cygwin.com/problems.html
FAQ: http://cygwin.com/faq/
Documentation: http://cygwin.com/docs.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-06-19 23:57 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-06-19 20:24 dig and host not returning output in bind-utils-9.10.2-1 Keith Christian
2015-06-19 21:36 ` Yaakov Selkowitz
2015-06-19 23:57 ` Keith Christian
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).