* undetectable libraries @ 2020-08-27 22:51 Juan carlos Rebate 2020-08-27 23:07 ` Yasuhiro KIMURA 2020-08-29 8:26 ` Hans-Bernhard Bröker 0 siblings, 2 replies; 9+ messages in thread From: Juan carlos Rebate @ 2020-08-27 22:51 UTC (permalink / raw) To: cygwin good evening, I have a strange problem, I try to compile code that uses gtk3 and sdl2 in addition to curl, the problem is that when I invoke the gcc compiler it tells me that sdl2-devel and libcurl are not installed, but actually yes are. ./configure --cross-prefix=x86_64-w64-mingw32- --enable-sdl --enable-gtk --enable-curl I'm not sure if they allow to send screenshot to show windows of the cygwin package installer so they can see the installed packages. How could I find the variable and add it to compile? ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: undetectable libraries 2020-08-27 22:51 undetectable libraries Juan carlos Rebate @ 2020-08-27 23:07 ` Yasuhiro KIMURA 2020-08-27 23:40 ` Juan carlos Rebate 2020-08-29 8:26 ` Hans-Bernhard Bröker 1 sibling, 1 reply; 9+ messages in thread From: Yasuhiro KIMURA @ 2020-08-27 23:07 UTC (permalink / raw) To: cygwin From: Juan carlos Rebate via Cygwin <cygwin@cygwin.com> Subject: undetectable libraries Date: Fri, 28 Aug 2020 00:51:41 +0200 > good evening, I have a strange problem, I try to compile code that > uses gtk3 and sdl2 in addition to curl, the problem is that when I > invoke the gcc compiler it tells me that sdl2-devel and libcurl are > not installed, but actually yes are. > ./configure --cross-prefix=x86_64-w64-mingw32- --enable-sdl > --enable-gtk --enable-curl > I'm not sure if they allow to send screenshot to show windows of the > cygwin package installer so they can see the installed packages. How > could I find the variable and add it to compile? Did you install packages such as libcurl-devel, libgtk3-devel and libSDL2-devel? --- Yasuhiro KIMURA ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: undetectable libraries 2020-08-27 23:07 ` Yasuhiro KIMURA @ 2020-08-27 23:40 ` Juan carlos Rebate 2020-08-28 3:29 ` Brian Inglis 2020-08-29 6:12 ` Yasuhiro KIMURA 0 siblings, 2 replies; 9+ messages in thread From: Juan carlos Rebate @ 2020-08-27 23:40 UTC (permalink / raw) To: cygwin yes mingw64-x86_64-gtk3 mingw64-x86_64-sdl2 sdl2-devel libcurl-devel El vie., 28 ago. 2020 a las 1:10, Yasuhiro KIMURA (<yasu@utahime.org>) escribió: > > From: Juan carlos Rebate via Cygwin <cygwin@cygwin.com> > Subject: undetectable libraries > Date: Fri, 28 Aug 2020 00:51:41 +0200 > > > good evening, I have a strange problem, I try to compile code that > > uses gtk3 and sdl2 in addition to curl, the problem is that when I > > invoke the gcc compiler it tells me that sdl2-devel and libcurl are > > not installed, but actually yes are. > > ./configure --cross-prefix=x86_64-w64-mingw32- --enable-sdl > > --enable-gtk --enable-curl > > I'm not sure if they allow to send screenshot to show windows of the > > cygwin package installer so they can see the installed packages. How > > could I find the variable and add it to compile? > > Did you install packages such as libcurl-devel, libgtk3-devel and > libSDL2-devel? > > --- > Yasuhiro KIMURA > -- > Problem reports: https://cygwin.com/problems.html > FAQ: https://cygwin.com/faq/ > Documentation: https://cygwin.com/docs.html > Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: undetectable libraries 2020-08-27 23:40 ` Juan carlos Rebate @ 2020-08-28 3:29 ` Brian Inglis 2020-08-28 21:08 ` Juan carlos Rebate 2020-08-29 6:12 ` Yasuhiro KIMURA 1 sibling, 1 reply; 9+ messages in thread From: Brian Inglis @ 2020-08-28 3:29 UTC (permalink / raw) To: cygwin On 2020-08-27 17:40, Juan carlos Rebate via Cygwin wrote: > El vie., 28 ago. 2020 a las 1:10, Yasuhiro KIMURA escribió: >> On Fri, 28 Aug 2020 00:51:41 +0200, Juan carlos Rebate via Cygwin wrote: >>> good evening, I have a strange problem, I try to compile code that >>> uses gtk3 and sdl2 in addition to curl, the problem is that when I >>> invoke the gcc compiler it tells me that sdl2-devel and libcurl are >>> not installed, but actually yes are. >>> ./configure --cross-prefix=x86_64-w64-mingw32- --enable-sdl >>> --enable-gtk --enable-curl >>> I'm not sure if they allow to send screenshot to show windows of the >>> cygwin package installer so they can see the installed packages. How >>> could I find the variable and add it to compile? >> Did you install packages such as libcurl-devel, libgtk3-devel and >> libSDL2-devel? > yes mingw64-x86_64-gtk3 > mingw64-x86_64-sdl2 > sdl2-devel > libcurl-devel Check what Cygwin packages exist (allows EREs) on Cygwin site: $ cygcheck -p libgtk[1-9].*-devel Found 8 matches for libgtk[1-9].*-devel libgtk1.2-devel-1.2.10-12 - libgtk1.2-devel: Gimp Toolkit GUI library (version 1.2) (installed binaries and support file s) libgtk1.2-devel-1.2.10-13 - libgtk1.2-devel: Gimp Toolkit GUI library (version 1.2) (installed binaries and support file s) libgtk2.0-devel-2.24.30-1 - libgtk2.0-devel: GTK+ X11 GUI toolkit (development) (installed binaries and support files) libgtk2.0-devel-2.24.31-1 - libgtk2.0-devel: GTK+ X11 GUI toolkit (development) (installed binaries and support files) libgtk2.0-devel-2.24.32-1 - libgtk2.0-devel: GTK+ X11 GUI toolkit (development) libgtk3-devel-3.22.15-1 - libgtk3-devel: GTK+ X11 GUI toolkit (development) libgtk3-devel-3.22.20-1 - libgtk3-devel: GTK+ X11 GUI toolkit (development) libgtk3-devel-3.22.28-1 - libgtk3-devel: GTK+ X11 GUI toolkit (development) Check if Cygwin package (exact name) installed and status of installed files: $ cygcheck -c libgtk3-devel Cygwin Package Information Package Version Status libgtk3-devel 3.22.28-1 OK -- Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada This email may be disturbing to some readers as it contains too much technical detail. Reader discretion is advised. [Data in IEC units and prefixes, physical quantities in SI.] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: undetectable libraries 2020-08-28 3:29 ` Brian Inglis @ 2020-08-28 21:08 ` Juan carlos Rebate 2020-08-29 5:44 ` Brian Inglis 0 siblings, 1 reply; 9+ messages in thread From: Juan carlos Rebate @ 2020-08-28 21:08 UTC (permalink / raw) To: cygwin [-- Attachment #1: Type: text/plain, Size: 2956 bytes --] In the images that I have attached to this email you can see how the packages are installed, I have always installed them this way and I have never had failures El vie., 28 ago. 2020 a las 5:30, Brian Inglis (<Brian.Inglis@systematicsw.ab.ca>) escribió: > > On 2020-08-27 17:40, Juan carlos Rebate via Cygwin wrote: > > El vie., 28 ago. 2020 a las 1:10, Yasuhiro KIMURA escribió: > >> On Fri, 28 Aug 2020 00:51:41 +0200, Juan carlos Rebate via Cygwin wrote: > > >>> good evening, I have a strange problem, I try to compile code that > >>> uses gtk3 and sdl2 in addition to curl, the problem is that when I > >>> invoke the gcc compiler it tells me that sdl2-devel and libcurl are > >>> not installed, but actually yes are. > >>> ./configure --cross-prefix=x86_64-w64-mingw32- --enable-sdl > >>> --enable-gtk --enable-curl > >>> I'm not sure if they allow to send screenshot to show windows of the > >>> cygwin package installer so they can see the installed packages. How > >>> could I find the variable and add it to compile? > > >> Did you install packages such as libcurl-devel, libgtk3-devel and > >> libSDL2-devel? > > > yes mingw64-x86_64-gtk3 > > mingw64-x86_64-sdl2 > > sdl2-devel > > libcurl-devel > > Check what Cygwin packages exist (allows EREs) on Cygwin site: > > $ cygcheck -p libgtk[1-9].*-devel > Found 8 matches for libgtk[1-9].*-devel > libgtk1.2-devel-1.2.10-12 - libgtk1.2-devel: Gimp Toolkit GUI library (version > 1.2) (installed binaries and support file > s) > libgtk1.2-devel-1.2.10-13 - libgtk1.2-devel: Gimp Toolkit GUI library (version > 1.2) (installed binaries and support file > s) > libgtk2.0-devel-2.24.30-1 - libgtk2.0-devel: GTK+ X11 GUI toolkit (development) > (installed binaries and support files) > libgtk2.0-devel-2.24.31-1 - libgtk2.0-devel: GTK+ X11 GUI toolkit (development) > (installed binaries and support files) > libgtk2.0-devel-2.24.32-1 - libgtk2.0-devel: GTK+ X11 GUI toolkit (development) > libgtk3-devel-3.22.15-1 - libgtk3-devel: GTK+ X11 GUI toolkit (development) > libgtk3-devel-3.22.20-1 - libgtk3-devel: GTK+ X11 GUI toolkit (development) > libgtk3-devel-3.22.28-1 - libgtk3-devel: GTK+ X11 GUI toolkit (development) > > Check if Cygwin package (exact name) installed and status of installed files: > > $ cygcheck -c libgtk3-devel > Cygwin Package Information > Package Version Status > libgtk3-devel 3.22.28-1 OK > > -- > Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada > > This email may be disturbing to some readers as it contains > too much technical detail. Reader discretion is advised. > [Data in IEC units and prefixes, physical quantities in SI.] > -- > Problem reports: https://cygwin.com/problems.html > FAQ: https://cygwin.com/faq/ > Documentation: https://cygwin.com/docs.html > Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple [-- Attachment #2: cap1.PNG --] [-- Type: image/png, Size: 32199 bytes --] [-- Attachment #3: cap2.PNG --] [-- Type: image/png, Size: 34239 bytes --] [-- Attachment #4: cap4.PNG --] [-- Type: image/png, Size: 35926 bytes --] [-- Attachment #5: cap3.PNG --] [-- Type: image/png, Size: 24572 bytes --] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: undetectable libraries 2020-08-28 21:08 ` Juan carlos Rebate @ 2020-08-29 5:44 ` Brian Inglis 0 siblings, 0 replies; 9+ messages in thread From: Brian Inglis @ 2020-08-29 5:44 UTC (permalink / raw) To: cygwin On 2020-08-28 15:08, Juan carlos Rebate via Cygwin wrote: > El vie., 28 ago. 2020 a las 5:30, Brian Inglis > (<Brian.Inglis@systematicsw.ab.ca>) escribió: >> >> On 2020-08-27 17:40, Juan carlos Rebate via Cygwin wrote: >>> El vie., 28 ago. 2020 a las 1:10, Yasuhiro KIMURA escribió: >>>> On Fri, 28 Aug 2020 00:51:41 +0200, Juan carlos Rebate via Cygwin wrote: >> >>>>> good evening, I have a strange problem, I try to compile code that >>>>> uses gtk3 and sdl2 in addition to curl, the problem is that when I >>>>> invoke the gcc compiler it tells me that sdl2-devel and libcurl are >>>>> not installed, but actually yes are. >>>>> ./configure --cross-prefix=x86_64-w64-mingw32- --enable-sdl >>>>> --enable-gtk --enable-curl >>>>> I'm not sure if they allow to send screenshot to show windows of the >>>>> cygwin package installer so they can see the installed packages. How >>>>> could I find the variable and add it to compile? >> >>>> Did you install packages such as libcurl-devel, libgtk3-devel and >>>> libSDL2-devel? >> >>> yes mingw64-x86_64-gtk3 >>> mingw64-x86_64-sdl2 >>> sdl2-devel >>> libcurl-devel >> >> Check what Cygwin packages exist (allows EREs) on Cygwin site: >> >> $ cygcheck -p libgtk[1-9].*-devel >> Found 8 matches for libgtk[1-9].*-devel >> libgtk1.2-devel-1.2.10-12 - libgtk1.2-devel: Gimp Toolkit GUI library (version >> 1.2) (installed binaries and support file >> s) >> libgtk1.2-devel-1.2.10-13 - libgtk1.2-devel: Gimp Toolkit GUI library (version >> 1.2) (installed binaries and support file >> s) >> libgtk2.0-devel-2.24.30-1 - libgtk2.0-devel: GTK+ X11 GUI toolkit (development) >> (installed binaries and support files) >> libgtk2.0-devel-2.24.31-1 - libgtk2.0-devel: GTK+ X11 GUI toolkit (development) >> (installed binaries and support files) >> libgtk2.0-devel-2.24.32-1 - libgtk2.0-devel: GTK+ X11 GUI toolkit (development) >> libgtk3-devel-3.22.15-1 - libgtk3-devel: GTK+ X11 GUI toolkit (development) >> libgtk3-devel-3.22.20-1 - libgtk3-devel: GTK+ X11 GUI toolkit (development) >> libgtk3-devel-3.22.28-1 - libgtk3-devel: GTK+ X11 GUI toolkit (development) >> >> Check if Cygwin package (exact name) installed and status of installed files: >> >> $ cygcheck -c libgtk3-devel >> Cygwin Package Information >> Package Version Status >> libgtk3-devel 3.22.28-1 OK > In the images that I have attached to this email you can see how the > packages are installed, I have always installed them this way and I > have never had failures ...that you have noticed, so far. That's unusual, as we have probably all had issues at some point with some package install, that we have had to remove and reinstall to fix, if we have installed and upgraded enough packages over a long enough period of time. Setup is normally reliable, but networks sometimes are not, and problems occasionally occur syncing some package mirror directories, or downloading the packages. The question is do you have libgtk*-devel installed and what is the *current* package status of that and the other prerequisites? -- Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada This email may be disturbing to some readers as it contains too much technical detail. Reader discretion is advised. [Data in IEC units and prefixes, physical quantities in SI.] ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: undetectable libraries 2020-08-27 23:40 ` Juan carlos Rebate 2020-08-28 3:29 ` Brian Inglis @ 2020-08-29 6:12 ` Yasuhiro KIMURA 2020-08-29 7:33 ` Marco Atzeri 1 sibling, 1 reply; 9+ messages in thread From: Yasuhiro KIMURA @ 2020-08-29 6:12 UTC (permalink / raw) To: cygwin From: Juan carlos Rebate via Cygwin <cygwin@cygwin.com> Subject: Re: undetectable libraries Date: Fri, 28 Aug 2020 01:40:46 +0200 > yes mingw64-x86_64-gtk3 > mingw64-x86_64-sdl2 > sdl2-devel > libcurl-devel Then my next suggestion is to provide more information about your problem. For example, * What software are you trying to build? Do you write it by yourself? Or are you trying to build one that is distributed somewhere? * It seems configure script is used. Then what outputs are displayed when you run it? --- Yasuhiro KIMURA ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: undetectable libraries 2020-08-29 6:12 ` Yasuhiro KIMURA @ 2020-08-29 7:33 ` Marco Atzeri 0 siblings, 0 replies; 9+ messages in thread From: Marco Atzeri @ 2020-08-29 7:33 UTC (permalink / raw) To: cygwin On 29.08.2020 08:12, Yasuhiro KIMURA wrote: > From: Juan carlos Rebate via Cygwin > Subject: Re: undetectable libraries > Date: Fri, 28 Aug 2020 01:40:46 +0200 > >> yes mingw64-x86_64-gtk3 >> mingw64-x86_64-sdl2 >> sdl2-devel >> libcurl-devel > > Then my next suggestion is to provide more information about your > problem. For example, > > * What software are you trying to build? Do you write it by yourself? > Or are you trying to build one that is distributed somewhere? > * It seems configure script is used. Then what outputs are displayed > when you run it? > > --- In addition to Yasushiro suggesstion, the config.log is a good starting point For what I see there is no mingw64-x86_64-curl in your list so that is likely a blocking point ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: undetectable libraries 2020-08-27 22:51 undetectable libraries Juan carlos Rebate 2020-08-27 23:07 ` Yasuhiro KIMURA @ 2020-08-29 8:26 ` Hans-Bernhard Bröker 1 sibling, 0 replies; 9+ messages in thread From: Hans-Bernhard Bröker @ 2020-08-29 8:26 UTC (permalink / raw) To: Juan carlos Rebate, cygwin Am 28.08.2020 um 00:51 schrieb Juan carlos Rebate via Cygwin: > good evening, I have a strange problem, I try to compile code that > uses gtk3 and sdl2 in addition to curl, Would you mind revealing what code that is? > the problem is that when I > invoke the gcc compiler it tells me that sdl2-devel and libcurl are > not installed, but actually yes are. I'm pretty sure that GCC would never tell you those particular things. It would tell you which files it cannot find, but not which package they're supposed to be from. > ./configure --cross-prefix=x86_64-w64-mingw32- --enable-sdl > --enable-gtk --enable-curl That configure call looks strange, particularly the --cross-prefix part. The usual way of asking configure to build for a target platform other than the build host would look more like this: ./configure --host=x86_64-w64-mingw32 The actual output from your configure run, and/or the generated config.log file would almost certainly be more helpful than further speculation about the details of cygwin setup usage. ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-08-29 8:26 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-08-27 22:51 undetectable libraries Juan carlos Rebate 2020-08-27 23:07 ` Yasuhiro KIMURA 2020-08-27 23:40 ` Juan carlos Rebate 2020-08-28 3:29 ` Brian Inglis 2020-08-28 21:08 ` Juan carlos Rebate 2020-08-29 5:44 ` Brian Inglis 2020-08-29 6:12 ` Yasuhiro KIMURA 2020-08-29 7:33 ` Marco Atzeri 2020-08-29 8:26 ` Hans-Bernhard Bröker
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).