* Re: Gnuwin32 b18 "make from source" bugs and fixes.
@ 1997-09-01 18:30 mark
0 siblings, 0 replies; 2+ messages in thread
From: mark @ 1997-09-01 18:30 UTC (permalink / raw)
To: gnu-win32, noer
This article was execllent. Does everyone who tries to
re-compile the source under NT get these problems, or are a
few (a lot) of us doing something silly and obvious wrong?
I am now trying to compile GCC as a mips ans m68k cross
compiler, and would like to build a similar list to the
above.
I am using the config options,
--target=m68k-coff and --target=mips-big-ecoff
both configurations stop at the "make-all" stage with the
following error :-
/src/tcl/unix/../generic/../win/tclWinPort.h:29: sys/timeb.h:
No such
file or directory
gcc: Internal compiler error: program cpp got fatal signal 33
make: *** [regexp.o] Error 1
make: *** [all] Error 2
make: *** [all-tcl] Error 2
Can anyone help, Pleaseee?
_______________________________________________
Mark G Hannah Email:mark@solcom.co.uk
SolCom Systems
SolCom House Tel: +44 1506 461707
Meikle Road Fax: +44 1506 461717
Kirkton Campus
Livingston http://www.solcom.co.uk
EH54 7DE 9/1/97 9:50:40 AM
_______________________________________________
-
For help on using this list (especially unsubscribing), send a message to
"gnu-win32-request@cygnus.com" with one line of text: "help".
^ permalink raw reply [flat|nested] 2+ messages in thread
* Gnuwin32 b18 "make from source" bugs and fixes
@ 1997-08-17 5:12 Tage Westlund
0 siblings, 0 replies; 2+ messages in thread
From: Tage Westlund @ 1997-08-17 5:12 UTC (permalink / raw)
To: gnu-win32
To users and designers!
SOME REASONS WHY "make" gnuwin32 FROM SOURCE STOPS.
===============================================================
I have spent some time building a gnuwin32 b18 system for win95
from source code. This was downloaded on july 1:st from:
ftp://sunsite.fri.uni-lj.si/pub/gnu-win32/gnu-win32-b18/cdk-src/*
in pieces xca - xcj.
My goal is to keep three versions of gnuwin32 available:
b17.1 in directory /cygnus/H-i386-cygwin32/bin
b18 from binaries xaa - xah in /gnuwin32/b18/H-i386-cygwin32/bin
b18 from source and with needed patches in /usr/local/bin
I simply intend to change autoexec.bat to change the version.
During system generation autoexec pointed at the binary b18.
I first downloaded the binary b18 according to the README.txt
===============================================================
I have not yet run any imported patches. Maybe I should have
done that? I have not yet run the user-tools "make". Unwise?
I will now try to describe the errors that stopped the
"bash$ make" and "bash$ make install" processes and those more
or less deterministic hacks that brougt me to the full installa-
tion. Since this mail is too voluminous, I will first give the
most unique error text for every "make" stop so you can decide
if the rest is of any interest. The patch details follow later.
I am rather convinced that parts of the cases 1,8,10,11, and 12
contain ***TRUE BUGS***. The rest could be due to my lack of
experience and of more complete README texts.
===============================================================
Executing "bash$ make" I got error stops 1-7
1. make: DLLTOOL@: Command not found
make: *** [libtcl7.6.a] Error 127
make: *** [all] Error 2
make: *** [all-tcl] Error 2
bash$ ( make exits )
Code that was adjusted to avoid stop at next "make" restart:
.../cdk/tcl/win/Makefile
.../cdk/tk/win/Makefile
( below I use the following shorthand for the text above:
make: DLLTOOL@: Command not found
*** libtcl7.6.a all all-tcl 127 2 2 ***
Code: .../cdk/tcl/win/Makefile .../cdk/tk/win/Makefile )
2. In file included from ./gdbtk.c:31:
.../cdk/tk/generic/tk.h:72: X11/Xlib.h: No such file or dir.
gcc: Internal compiler error: program cpp got fatal signal 33
*** gdbtk.o all-gdb 1 2 ***
Code: .../cdk/tk/generic/tk.h .../cdk/tk/xlib/X11/Xlib.h
3. At gcc ... -o gdb linking
ld.exe: cannot open -lX11: No such file or dir.
gcc: Internal compiler error: program got fatal signal 1
Code: .../cdk/gdb/Makefile
4. At gcc ... -o gperf linking
ld: cannot open crt0.o: No such file or dir.
xgcc: Internal compiler error: program ld got fatal signal 1
*** gperf src-all subdir-do all all-target-libg++ 1 2 1 2 2 ***
Code: .../cdk/libg++/gperf/src/crt0.o
5. At gcc ... -o gperf linking
ld: cannot open -lm: No such file or dir.
xgcc: Internal compiler error: program ld got fatal signal 1
*** gperf src-all subdir-do all all-target-libg++ 1 2 1 2 2 ***
Code: .../cdk/libg++/gperf/src/Makefile
6. At gcc ... -o gperf linking
ld; cannot open -lcygwin: No such file or dir.
Code: .../cdk/libg++/gperf/src/Makefile .../cdk/newlib/libcygwin.a
7. At gcc ... -o gperf linking
ld; cannot open -lkernel32: No such file or dir.
Code: .../cdk/libg++/gperf/src/Makefile
.../cdk/newlib/libkernel32.a
============================================================
Executing "bash$ make install" I got error stops 8-12
8. Making directory /lib
Installing libtcl7.6.a
ranlib: libtcl7.6.a: No such file or dir.
*** install-binaries install install-tcl 9 2 2 ***
Code: .../cdk/tcl/win/Makefile.in and Makefile
.../cdk/tk/win/Makefile.in and Makefile
9. Installing libtk4.2.a
make: ./install-sh: Command not found
*** install-binaries install install-tk 127 2 2 ***
Code: .../cdk/tk/win/install-sh
10. Installing ./library/../prolog.ps
cp: ./library/../prolog.ps: No such file or dir.
Installing doc/*.1
/bin/sh: /usr/local/man/man1/*.1: No such file or dir.
chmod: /usr/local/man/man1/*.1: No such file or dir.
*** install-man install install-tk 1 2 2 ***
Code: .../cdk/tk/win/Makefile
11. cd /usr/local/bin && ln flex flex++
(C:\BIN\SH.EXE 15076) In cygwin_except_handler
The system hangs. One has to make power off and on.
Code: .../cdk/flex/Makefile
12. ( cd include; \
tar -cf - .; exit 0 ) | ( cd /usr/local/lib/gcc-lib/
i386-pc-cygwin32/cygnus-2.7.2-970404/include ;
tar xpBf - ) (no new lines in original)
tar: Could not change access and modification time
of objc: Permission denied
tar: Could not change access and modification time
of .: Permission denied
(C:\BIN\SH.EXE 60373) In cygwin_except_handler
(C:\BIN\SH.EXE 60373) Exception trapped
- - - - the usual stack tracing - - - -
*** install-headers-tar install-gcc 2 2 ***
Code: .../gcc/Makefile
==============================================================
WORKAROUNDS for 1-12. Some are obvious minor bugs, some are
only corrections to secondary errors where I have no deep under-
standing, some are due to tunneling effects, cosmic radiation
or what?
1. Thanks to Benjamin Sean Scarlet <scarlet@mit.edu> I found
in .../cdk/tcl/win/Makefile and .../cdk/tk/win/Makefile
DLLTOOL = @DLLTOOL@ ( configure has left this line un-
changed from Makefile.in )
DLLTOOL = dlltool <=== 1 is the patch
in .../cdk/tk/win/Makefile there is also:
COMPAT_OBJS = @LIBOBJS@ but it is unused
2. I modified the source. Probably not the utmost method.
in .../cdk/tk/generic/tk.h line 72:
#include <X11/Xlib.h> altered:
#include <../tk/xlib/X11/Xlib.h> <=== 1
in .../cdk/tk/xlib/X11/Xlib.h lines 35 and 42
#include <X11/X.h> altered:
#include <../tk/xlib/X11/X.h> <=== 2
#include <X11/Xfuncproto.h> altered:
#include <../tk/xlib/X11/Xfuncproto.h> <=== 3
3. In .../cdk/gdb/Makefile two variables INSTALLED_LIBS= and
CLIBS= both containing the line:
$(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) -lm \
$(TK) $(TCL) $(X11_LDFLAGS) $(X11_LIBS) \
-lX11 \ altered:
$(TERMCAP) $(XM_CLIBS) $(TM_CLIBS) $(NAT_CLIBS) -lm \
$(TK) $(TCL) $(X11_LDFLAGS) $(X11_LIBS) \
-L/.../cdk/tk/xlib -lX11 <=== 1 + 2
( .../ depicts for instance in my case /gnuwin32/b18src )
( original: no "new lines" in $(TERMCAP) above )
4. I copied the files .../cdk/newlib/crt0.c and crt0.o
to .../cdk/libg++/gperf/src/crt0.c and crt0.o <=== 1 + 2
5-7. In .../cdk/libg++/gperf/src/Makefile at the end:
$(TARGETPROG): $(OBJECTS)
$(CXX) $(LDFLAGS) -o $@ $(OBJECTS) $(LIBS) -lm
was altered to:
$(TARGETPROG): $(OBJECTS) <=== 1
$(CXX) $(LDFLAGS) -o $@ $(OBJECTS) $(LIBS) \
-L/gnuwin32/b18src/cdk/newlib -lm -lcygwin -lkernel32
From .../b18/H-i386-cygwin32/i386-cygwin32/lib/ directory
the files libcygwin.a and libkernel32.a were copied to
.../cdk/newlib/ directory <=== 2 + 3
( .../b18 denotes the binary release directories )
8. I found a really hidden error in:
.../cdk/tcl/win/Makefile.in It showed up that in the line:
exec_prefix = @exec_prefix@ there was an extra blank after
the word "prefix@". This was transformed to an
extra blank after the word "local " in Makefile.
This extra blank had to be removed. <=== 1
Exactly the same defect is seen in:
.../cdk/tk/win/Makefile.in and in the corresponding
.../cdk/tk/win/Makefile <=== 2
9. The script install-sh had to be brought also to the directory
.../cdk/th/win/ for instance from
.../cdk/tcl/win/install-sh <=== 1
10. In .../cdk/tk/win/Makefile the line
for i in $(SRC_DIR)/../library/*.tcl $(SRC_DIR)/../library/*.gif
$(SRC_DIR)/../library/*.xbm $(SRC_DIR)/../library/tclIndex
$(SRC_DIR)/library/../prolog.ps $(SRC_DIR)/winMain.c; \
( original: no new line ) should be spelt: <=== 1
$(SRC_DIR)/../library/prolog.ps $(SRC_DIR)/winMain.c; \
On three locations in the same file at install-man:
cd $(SRC_DIR)/doc; for i in *.1; altered:
cd $(SRC_DIR)/../doc; for i in *.1; \ <=== 2 + 3 + 4
11. In .../cdk/flex/Makefile the line
-cd $(libdir) && $(RANLIB) $(FLEXLIB) is altered:
cd $(libdir) && $(RANLIB) $(FLEXLIB) <=== 1
Reference to an older release:
INSTALL = /CYGNUS/H-I386-CYGWIN32/BIN/install -c is altered:
INSTALL = .../cdk/install-sh -c <=== 2
Setting the link:
cd $(bindir) && ln $(FLEX) $(FLEX)++ gives the hang
of the system. Alter to:
cd $(bindir) <=== 3
But then the link has to be done manually. There was no
problem. Or simply cp flex.exe flex++.exe <=== 4
12. The problem is when copying the contents of:
.../cdk/gcc/include as a part of the installation to:
/usr/local/lib/gcc-lib/i386-pc-cygwin32/ (no new line)
cygnus-2.7.2-970404/include
Because of Permission denied error I had to discard the
installation method of piping between two tar processes:
# (cd include; \ <=== 1
# tar -cf - .; exit 0) | (cd $(libsubdir)/include; \
# tar $(TAROUTOPTS) - )
Therefore I had to copy between the "include" directories
manually. <=== 2
==============================================================
main(){printf("Hello World\n\"Little keystrokes fell great oaks\"\n");}
Tage
-
For help on using this list (especially unsubscribing), send a message to
"gnu-win32-request@cygnus.com" with one line of text: "help".
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~1997-09-01 18:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
1997-09-01 18:30 Gnuwin32 b18 "make from source" bugs and fixes mark
-- strict thread matches above, loose matches on Subject: below --
1997-08-17 5:12 Tage Westlund
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).