* Seeing double in /proc/partitions (Win 7 Home) @ 2021-07-31 21:12 Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-07-31 22:34 ` Brian Inglis 2021-08-02 8:48 ` Corinna Vinschen 0 siblings, 2 replies; 13+ messages in thread From: Lavrentiev, Anton (NIH/NLM/NCBI) [C] @ 2021-07-31 21:12 UTC (permalink / raw) To: 'cygwin@cygwin.com' Hi all, Is there any special reason that most of my drives are shown twice in /proc/partitions on my home machine? (it's still Windows 7) Notably, all drives in between the first (C:) and the last (S:). $ cat /proc/partitions major minor #blocks name win-mounts 8 0 500107608 sda 8 1 102400 sda1 8 2 488280064 sda2 C:\ 8 16 1000204632 sdb 8 17 1000202240 sdb1 D:\ 8 16 1000204632 sdb 8 17 1000202240 sdb1 D:\ 8 32 1000204632 sdc 8 33 1000202240 sdc1 G:\ 8 32 1000204632 sdc 8 33 1000202240 sdc1 G:\ 8 48 1000204632 sdd 8 49 1000202240 sdd1 I:\ 8 48 1000204632 sdd 8 49 1000202240 sdd1 I:\ 8 64 234431064 sde 8 65 234428416 sde1 F:\ 8 64 234431064 sde 8 65 234428416 sde1 F:\ 8 80 1931264 sdf 8 81 1931264 sdf1 S:\ $ uname -a CYGWIN_NT-6.1 ANTON 3.2.0(0.340/5/3) 2021-03-29 08:42 x86_64 Cygwin Thanks, Anton Lavrentiev Contractor NIH/NLM/NCBI ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Seeing double in /proc/partitions (Win 7 Home) 2021-07-31 21:12 Seeing double in /proc/partitions (Win 7 Home) Lavrentiev, Anton (NIH/NLM/NCBI) [C] @ 2021-07-31 22:34 ` Brian Inglis 2021-08-02 8:48 ` Corinna Vinschen 1 sibling, 0 replies; 13+ messages in thread From: Brian Inglis @ 2021-07-31 22:34 UTC (permalink / raw) To: cygwin On 2021-07-31 15:12, Lavrentiev, Anton (NIH/NLM/NCBI) [C] via Cygwin wrote: > Is there any special reason that most of my drives are shown twice > in /proc/partitions on my home machine? (it's still Windows 7) > Notably, all drives in between the first (C:) and the last (S:). > > $ cat /proc/partitions > major minor #blocks name win-mounts > > 8 0 500107608 sda > 8 1 102400 sda1 > 8 2 488280064 sda2 C:\ > 8 16 1000204632 sdb > 8 17 1000202240 sdb1 D:\ > 8 16 1000204632 sdb > 8 17 1000202240 sdb1 D:\ > 8 32 1000204632 sdc > 8 33 1000202240 sdc1 G:\ > 8 32 1000204632 sdc > 8 33 1000202240 sdc1 G:\ > 8 48 1000204632 sdd > 8 49 1000202240 sdd1 I:\ > 8 48 1000204632 sdd > 8 49 1000202240 sdd1 I:\ > 8 64 234431064 sde > 8 65 234428416 sde1 F:\ > 8 64 234431064 sde > 8 65 234428416 sde1 F:\ > 8 80 1931264 sdf > 8 81 1931264 sdf1 S:\ > > $ uname -a > CYGWIN_NT-6.1 ANTON 3.2.0(0.340/5/3) 2021-03-29 08:42 x86_64 Cygwin Do you have any kinds of multi-controller, multi-disk, RAIDx, or other hardware or driver setup that could result in some drives being visible twice on your system? To me it looks like you may have six controllers or interfaces on your system, two look like usual IDE/PATA/SATE, four something more complex. Perhaps you could also show output from: $ $ df -a ; fsutil volume list -- Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada This email may be disturbing to some readers as it contains too much technical detail. Reader discretion is advised. [Data in binary units and prefixes, physical quantities in SI.] ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Seeing double in /proc/partitions (Win 7 Home) 2021-07-31 21:12 Seeing double in /proc/partitions (Win 7 Home) Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-07-31 22:34 ` Brian Inglis @ 2021-08-02 8:48 ` Corinna Vinschen [not found] ` <DM8PR09MB7095A847B0E239753A1CC7C8A5EF9@DM8PR09MB7095.namprd09.prod.outlook.com> 1 sibling, 1 reply; 13+ messages in thread From: Corinna Vinschen @ 2021-08-02 8:48 UTC (permalink / raw) To: cygwin [-- Attachment #1: Type: text/plain, Size: 1312 bytes --] On Jul 31 21:12, Lavrentiev, Anton (NIH/NLM/NCBI) [C] via Cygwin wrote: > Hi all, > > Is there any special reason that most of my drives are shown twice in > /proc/partitions on my home machine? The only reason is a duplication of entries in the internal NT namespace, which sounds pretty broken. In a nutshell, Cygwin's /proc/partitions output is constructed from a loop over the internal \Device directory like this: dir = NtOpenDirectoryObject ("\\Device"); /* i. e. "opendir" */ while (NtQueryDirectoryObject (dir)) /* i. e. "readdir" */ { if (ObjectName =~ "Harddisk[0-9]*") { print disk info loop over partitions returned by a call to DeviceIoControl (IOCTL_DISK_GET_PARTITION_INFO_EX); { print partition info } } } NtClose (dir); /* i. e. "closedir" */ There's no code which would allow a repetition of the same entry, so any duplicate must have been returned by the call to NtQueryDirectoryObject. In other words, there's something fishy on your system. If you don't have it already, download the winobj tool from https://docs.microsoft.com/en-us/sysinternals/downloads/winobj and check the content of the Device directory. For comparison I attached a screenshot how this looks like on my machine. Corinna [-- Attachment #2: Screenshot_20210802_104125.png --] [-- Type: image/png, Size: 30839 bytes --] ^ permalink raw reply [flat|nested] 13+ messages in thread
[parent not found: <DM8PR09MB7095A847B0E239753A1CC7C8A5EF9@DM8PR09MB7095.namprd09.prod.outlook.com>]
* RE: Seeing double in /proc/partitions (Win 7 Home) [not found] ` <DM8PR09MB7095A847B0E239753A1CC7C8A5EF9@DM8PR09MB7095.namprd09.prod.outlook.com> @ 2021-08-02 14:11 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-08-02 14:41 ` Corinna Vinschen 0 siblings, 1 reply; 13+ messages in thread From: Lavrentiev, Anton (NIH/NLM/NCBI) [C] @ 2021-08-02 14:11 UTC (permalink / raw) To: cygwin > -----Original Message----- > From: Lavrentiev, Anton (NIH/NLM/NCBI) [C] > Sent: Monday, August 02, 2021 10:03 AM > To: cygwin@cygwin.com > Subject: RE: Seeing double in /proc/partitions (Win 7 Home) > > > If you don't have it already, download the winobj tool from > > https://docs.microsoft.com/en-us/sysinternals/downloads/winobj > > and check the content of the Device directory. > > I had winobj installed, and I'm attaching the screenshots of both drive C and other drives > (they are shown all the same way): > > Ironically, drive C (which is not dupped in the /proc/partitions output) is shown to have > two partitions, > but all other drives are all the same with only one (as shown in the attached pic, with > the only difference > for the numeric suffixes with increase sequentially). The last drive (S:), which is not > duplicated, either, > has the drive number and partition number with a jump, as a two-digit number (attached, > too)... > > Anton Lavrentiev > Contractor NIH/NLM/NCBI I think the list does not let me attach anything and thus discards the post entirely. Drive C: screenshot: https://drive.google.com/file/d/1tqCzx5aKWIuju1K0Rd9-1iJddq0VUuhs/view?usp=sharing Other drives: https://drive.google.com/file/d/1geb2H9hq-E6zqNLyPEJn-e1ugvlBtHMV/view?usp=sharing Last drive (S:): https://drive.google.com/file/d/1vfTOR5RLys1fBcFlIYpdNHmMlXkNimdM/view?usp=sharing Anton Lavrentiev Contractor NIH/NLM/NCBI ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Seeing double in /proc/partitions (Win 7 Home) 2021-08-02 14:11 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] @ 2021-08-02 14:41 ` Corinna Vinschen 2021-08-02 15:04 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 0 siblings, 1 reply; 13+ messages in thread From: Corinna Vinschen @ 2021-08-02 14:41 UTC (permalink / raw) To: cygwin On Aug 2 14:11, Lavrentiev, Anton (NIH/NLM/NCBI) [C] via Cygwin wrote: > > -----Original Message----- > > From: Lavrentiev, Anton (NIH/NLM/NCBI) [C] > > Sent: Monday, August 02, 2021 10:03 AM > > To: cygwin@cygwin.com > > Subject: RE: Seeing double in /proc/partitions (Win 7 Home) > > > > > If you don't have it already, download the winobj tool from > > > https://docs.microsoft.com/en-us/sysinternals/downloads/winobj > > > and check the content of the Device directory. > > > > I had winobj installed, and I'm attaching the screenshots of both drive C and other drives > > (they are shown all the same way): > > > > Ironically, drive C (which is not dupped in the /proc/partitions output) is shown to have > > two partitions, > > but all other drives are all the same with only one (as shown in the attached pic, with > > the only difference > > for the numeric suffixes with increase sequentially). The last drive (S:), which is not > > duplicated, either, > > has the drive number and partition number with a jump, as a two-digit number (attached, > > too)... > > > > Anton Lavrentiev > > Contractor NIH/NLM/NCBI > > I think the list does not let me attach anything and thus discards the post entirely. Just paste it into your mail text. Corinna ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Seeing double in /proc/partitions (Win 7 Home) 2021-08-02 14:41 ` Corinna Vinschen @ 2021-08-02 15:04 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-08-02 16:33 ` Corinna Vinschen 2021-08-02 18:13 ` Brian Inglis 0 siblings, 2 replies; 13+ messages in thread From: Lavrentiev, Anton (NIH/NLM/NCBI) [C] @ 2021-08-02 15:04 UTC (permalink / raw) To: cygwin; +Cc: Corinna Vinschen > Just paste it into your mail text. I posted links to the screenshot images on my G-drive... I can't post them into text as they are graphical Anton Lavrentiev Contractor NIH/NLM/NCBI ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Seeing double in /proc/partitions (Win 7 Home) 2021-08-02 15:04 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] @ 2021-08-02 16:33 ` Corinna Vinschen 2021-08-02 17:02 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-08-02 18:13 ` Brian Inglis 1 sibling, 1 reply; 13+ messages in thread From: Corinna Vinschen @ 2021-08-02 16:33 UTC (permalink / raw) To: Lavrentiev, Anton (NIH/NLM/NCBI) [C]; +Cc: cygwin On Aug 2 15:04, Lavrentiev, Anton (NIH/NLM/NCBI) [C] via Cygwin wrote: > > Just paste it into your mail text. > > I posted links to the screenshot images on my G-drive... I can't post them into text as they are graphical Ok, so your \Device entries appear normal. In that case, I don't have an explanation for the fact that the OS call NtQueryDirectoryObject returns all these Harddisk entries twice, except for BLODA, perhaps... ¯\_(ツ)_/¯ Corinna ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Seeing double in /proc/partitions (Win 7 Home) 2021-08-02 16:33 ` Corinna Vinschen @ 2021-08-02 17:02 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-08-02 17:09 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 0 siblings, 1 reply; 13+ messages in thread From: Lavrentiev, Anton (NIH/NLM/NCBI) [C] @ 2021-08-02 17:02 UTC (permalink / raw) To: cygwin > Ok, so your \Device entries appear normal. In that case, I don't have > an explanation for the fact that the OS call NtQueryDirectoryObject > returns all these Harddisk entries twice, except for BLODA, perhaps... Nothing of concern as BLODA is running on this PC, I keep it very clean. Interesting observation, though, that I just ran "strace cat /proc/partitions", and the output did not contain anything doubled: major minor #blocks name win-mounts 8 0 500107608 sda 8 1 102400 sda1 8 2 488280064 sda2 C:\ 8 16 1000204632 sdb 8 17 1000202240 sdb1 D:\ 8 32 1000204632 sdc 8 33 1000202240 sdc1 G:\ 8 48 1000204632 sdd 8 49 1000202240 sdd1 I:\ 8 64 234431064 sde 8 65 234428416 sde1 F:\ 8 80 1931264 sdf 8 81 1931264 sdf1 S:\ Anton Lavrentiev Contractor NIH/NLM/NCBI ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Seeing double in /proc/partitions (Win 7 Home) 2021-08-02 17:02 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] @ 2021-08-02 17:09 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-08-02 17:18 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 0 siblings, 1 reply; 13+ messages in thread From: Lavrentiev, Anton (NIH/NLM/NCBI) [C] @ 2021-08-02 17:09 UTC (permalink / raw) To: cygwin > Interesting observation, though, that I just ran "strace cat /proc/partitions", > and the output did not contain anything doubled: Also this is kinda unexpected: $ while read i; do echo $i; done < /proc/partitions major minor #blocks name win-mounts 8 0 500107608 sda 8 1 102400 sda1 8 2 488280064 sda2 C: 8 16 1000204632 sdb 8 17 1000202240 sdb1 D: 8 16 1000204632 sdb 8 17 1000202240 sdb1 D: 8 32 1000204632 sdc 8 33 1000202240 sdc1 G: 8 32 1000204632 sdc 8 33 1000202240 sdc1 G: 8 48 1000204632 sdd 8 49 1000202240 sdd1 I: 8 48 1000204632 sdd 8 49 1000202240 sdd1 I: 8 64 234431064 sde 8 65 234428416 sde1 F: 8 64 234431064 sde 8 65 234428416 sde1 F: 8 80 1931264 sdf ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Seeing double in /proc/partitions (Win 7 Home) 2021-08-02 17:09 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] @ 2021-08-02 17:18 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 0 siblings, 0 replies; 13+ messages in thread From: Lavrentiev, Anton (NIH/NLM/NCBI) [C] @ 2021-08-02 17:18 UTC (permalink / raw) To: cygwin > Also this is kinda unexpected: Sorry, scratch that, the backslash in the pay with the shell... So explains the weirdness Anton Lavrentiev Contractor NIH/NLM/NCBI ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: Seeing double in /proc/partitions (Win 7 Home) 2021-08-02 15:04 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-08-02 16:33 ` Corinna Vinschen @ 2021-08-02 18:13 ` Brian Inglis 2021-08-02 18:21 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 1 sibling, 1 reply; 13+ messages in thread From: Brian Inglis @ 2021-08-02 18:13 UTC (permalink / raw) To: cygwin On 2021-08-02 09:04, Anton Lavrentiev wrote: >> Just paste it into your mail text. > I posted links to the screenshot images on my G-drive... I can't > post them into text as they are graphical Under Cygwin you can also list from an elevated admin shell under /proc/sys (add Cygwin bin to an elevated cmd PATH) e.g.: > ls -dglo /proc/sys/Device/Harddisk[0-9]*/* > brw-rw-rw- 1 284, 9999 Aug 2 12:04 /proc/sys/Device/Harddisk0/DR0 > lr--r--r-- 1 0 Aug 2 12:04 /proc/sys/Device/Harddisk0/Partition0 -> /proc/sys/Device/Harddisk0/DR0 > lr--r--r-- 1 0 Aug 2 12:04 /proc/sys/Device/Harddisk0/Partition1 -> /proc/sys/Device/HarddiskVolume1 > lr--r--r-- 1 0 Aug 2 12:04 /proc/sys/Device/Harddisk0/Partition2 -> /proc/sys/Device/HarddiskVolume2 > lr--r--r-- 1 0 Aug 2 12:04 /proc/sys/Device/Harddisk0/Partition3 -> /proc/sys/Device/HarddiskVolume3 > brw-rw-rw- 1 284, 9999 Aug 2 12:04 /proc/sys/Device/Harddisk1/DR1 > lr--r--r-- 1 0 Aug 2 12:04 /proc/sys/Device/Harddisk1/Partition0 -> /proc/sys/Device/Harddisk1/DR1 > lr--r--r-- 1 0 Aug 2 12:04 /proc/sys/Device/Harddisk1/Partition1 -> /proc/sys/Device/HarddiskVolume4 > lr--r--r-- 1 0 Aug 2 12:04 /proc/sys/Device/Harddisk1/Partition2 -> /proc/sys/Device/HarddiskVolume5 > lr--r--r-- 1 0 Aug 2 12:04 /proc/sys/Device/Harddisk1/Partition3 -> /proc/sys/Device/HarddiskVolume6 > lr--r--r-- 1 0 Aug 2 12:04 /proc/sys/Device/Harddisk1/Partition4 -> /proc/sys/Device/HarddiskVolume7 > lr--r--r-- 1 0 Aug 2 12:04 /proc/sys/Device/Harddisk1/Partition5 -> /proc/sys/Device/HarddiskVolume8 > brw-rw-rw- 1 284, 9999 Aug 2 12:04 /proc/sys/Device/Harddisk2/DR2 > lr--r--r-- 1 0 Aug 2 12:04 /proc/sys/Device/Harddisk2/Partition0 -> /proc/sys/Device/Harddisk2/DR2 > lr--r--r-- 1 0 Aug 2 12:04 /proc/sys/Device/Harddisk2/Partition1 -> /proc/sys/Device/HarddiskVolume9 -- Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada This email may be disturbing to some readers as it contains too much technical detail. Reader discretion is advised. [Data in binary units and prefixes, physical quantities in SI.] ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Seeing double in /proc/partitions (Win 7 Home) 2021-08-02 18:13 ` Brian Inglis @ 2021-08-02 18:21 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 0 siblings, 0 replies; 13+ messages in thread From: Lavrentiev, Anton (NIH/NLM/NCBI) [C] @ 2021-08-02 18:21 UTC (permalink / raw) To: cygwin > Under Cygwin you can also list from an elevated admin shell under > /proc/sys (add Cygwin bin to an elevated cmd PATH) e.g.: Thanks. Did so. Everything is proper and singular, and totally matches the winobj display posted earlier: $ ls -dlgo /proc/sys/Device/Harddisk[0-9]*/* brw-rw-rw- 1 284, 9999 Aug 2 2021 /proc/sys/Device/Harddisk0/DR0 lr--r--r-- 1 0 Aug 2 14:14 /proc/sys/Device/Harddisk0/Partition0 -> /proc/sys/Device/Harddisk0/DR0 lr--r--r-- 1 0 Aug 2 14:14 /proc/sys/Device/Harddisk0/Partition1 -> /proc/sys/Device/HarddiskVolume1 lr--r--r-- 1 0 Aug 2 14:14 /proc/sys/Device/Harddisk0/Partition2 -> /proc/sys/Device/HarddiskVolume2 brw-rw-rw- 1 284, 9999 Aug 2 2021 /proc/sys/Device/Harddisk1/DR1 lr--r--r-- 1 0 Aug 2 14:14 /proc/sys/Device/Harddisk1/Partition0 -> /proc/sys/Device/Harddisk1/DR1 lr--r--r-- 1 0 Aug 2 14:14 /proc/sys/Device/Harddisk1/Partition1 -> /proc/sys/Device/HarddiskVolume3 brw-rw-rw- 1 284, 9999 Aug 2 2021 /proc/sys/Device/Harddisk2/DR2 lr--r--r-- 1 0 Aug 2 14:14 /proc/sys/Device/Harddisk2/Partition0 -> /proc/sys/Device/Harddisk2/DR2 lr--r--r-- 1 0 Aug 2 14:14 /proc/sys/Device/Harddisk2/Partition1 -> /proc/sys/Device/HarddiskVolume4 brw-rw-rw- 1 284, 9999 Aug 2 2021 /proc/sys/Device/Harddisk3/DR3 lr--r--r-- 1 0 Aug 2 14:14 /proc/sys/Device/Harddisk3/Partition0 -> /proc/sys/Device/Harddisk3/DR3 lr--r--r-- 1 0 Aug 2 14:14 /proc/sys/Device/Harddisk3/Partition1 -> /proc/sys/Device/HarddiskVolume5 brw-rw-rw- 1 284, 9999 Aug 2 2021 /proc/sys/Device/Harddisk4/DR4 lr--r--r-- 1 0 Aug 2 14:14 /proc/sys/Device/Harddisk4/Partition0 -> /proc/sys/Device/Harddisk4/DR4 lr--r--r-- 1 0 Aug 2 14:14 /proc/sys/Device/Harddisk4/Partition1 -> /proc/sys/Device/HarddiskVolume6 brw-rw-rw- 1 284, 9999 Aug 2 2021 /proc/sys/Device/Harddisk5/DR57 lr--r--r-- 1 0 Aug 2 14:14 /proc/sys/Device/Harddisk5/Partition0 -> /proc/sys/Device/Harddisk5/DR57 lr--r--r-- 1 0 Aug 2 14:14 /proc/sys/Device/Harddisk5/Partition1 -> /proc/sys/Device/HarddiskVolume59 And, Oh!, from the same elevated admin shell, I get no doubles from "cat /proc/partitions", either! $ cat /proc/partitions major minor #blocks name win-mounts 8 0 500107608 sda 8 1 102400 sda1 8 2 488280064 sda2 C:\ 8 16 1000204632 sdb 8 17 1000202240 sdb1 D:\ 8 32 1000204632 sdc 8 33 1000202240 sdc1 G:\ 8 48 1000204632 sdd 8 49 1000202240 sdd1 I:\ 8 64 234431064 sde 8 65 234428416 sde1 F:\ 8 80 1931264 sdf 8 81 1931264 sdf1 S:\ Note that "winobj" had to be run "as Administrator" as well, in order for me to be able to open those entries... IDK, if "strace" elevates itself somehow but like I noted previously, "strace -o cat.strace cat /proc/partitions" shows the list without duplicates. Anton Lavrentiev Contractor NIH/NLM/NCBI ^ permalink raw reply [flat|nested] 13+ messages in thread
* RE: Seeing double in /proc/partitions (Win 7 Home) @ 2021-08-01 16:45 Lavrentiev, Anton (NIH/NLM/NCBI) [C] 0 siblings, 0 replies; 13+ messages in thread From: Lavrentiev, Anton (NIH/NLM/NCBI) [C] @ 2021-08-01 16:45 UTC (permalink / raw) To: 'cygwin@cygwin.com' > Do you have any kinds of multi-controller, multi-disk, RAIDx, or other > hardware or driver setup that could result in some drives being visible > twice on your system? No, all the drives are single drives (no RAID) and attached to one Intel SATA controller, using individual connectors (drive C: is one of them, BTW). Drive S: is a multi-purpose card reader, which is actually a USB-interfaced removable device (so it's different from other drives). > $ df -a $ df -a Filesystem 1K-blocks Used Available Use% Mounted on C:/cygwin64/bin - - - - /usr/bin C:/cygwin64/lib - - - - /usr/lib C:/cygwin64 488280060 240883516 247396544 50% / C: - - - - /cygdrive/c D: 1000202236 996668308 3533928 100% /cygdrive/d F: 234428412 152089156 82339256 65% /cygdrive/f G: 1000202236 26959316 973242920 3% /cygdrive/g I: 1000202236 874474844 125727392 88% /cygdrive/i > fsutil volume list C:\Windows\system32>fsutil volume list list is an invalid parameter. ---- VOLUME Commands Supported ---- dismount Dismount a volume diskfree Query the free space of a volume querycluster Query which file is using a particular cluster But I ran this instead: DISKPART> list volume Volume ### Ltr Label Fs Type Size Status Info ---------- --- ----------- ----- ---------- ------- --------- -------- Volume 0 N CD-ROM 0 B No Media Volume 1 M DVD-ROM 0 B No Media Volume 2 System Rese NTFS Partition 100 MB Healthy System Volume 3 C OS NTFS Partition 465 GB Healthy Boot Volume 4 D .... NTFS Partition 953 GB Healthy Pagefile Volume 5 G .... NTFS Partition 953 GB Healthy Volume 6 I .... NTFS Partition 953 GB Healthy Volume 7 F .... NTFS Partition 223 GB Healthy Volume 8 S RAW Removable 1886 MB Healthy Anton Lavrentiev Contractor NIH/NLM/NCBI ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2021-08-02 18:21 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2021-07-31 21:12 Seeing double in /proc/partitions (Win 7 Home) Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-07-31 22:34 ` Brian Inglis 2021-08-02 8:48 ` Corinna Vinschen [not found] ` <DM8PR09MB7095A847B0E239753A1CC7C8A5EF9@DM8PR09MB7095.namprd09.prod.outlook.com> 2021-08-02 14:11 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-08-02 14:41 ` Corinna Vinschen 2021-08-02 15:04 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-08-02 16:33 ` Corinna Vinschen 2021-08-02 17:02 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-08-02 17:09 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-08-02 17:18 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-08-02 18:13 ` Brian Inglis 2021-08-02 18:21 ` Lavrentiev, Anton (NIH/NLM/NCBI) [C] 2021-08-01 16:45 Lavrentiev, Anton (NIH/NLM/NCBI) [C]
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).