RE: New version of setup - prerelease available

RE: New version of setup - prerelease available

[Robert Collins]

I've found a serious bug in that pre-release. It gets the md5 sums in
setup.ini wrong (it parses the low nibble into the high nibbles, and
vice versa. Oops).

I'm building a new snapshot now, it'll be on the website within the
hour.

Rob

> -----Original Message-----
> From: Alan Dobkin [mailto:Alan@ADobkin.Net] 
> Sent: Friday, May 03, 2002 7:08 AM
> To: Cygwin
> Cc: Robert Collins
> Subject: RE: New version of setup - prerelease available
> 
> 
> --On Thursday, May 02, 2002 9:41 PM +1000 Robert Collins 
> <robert.collins@itdomain.com.au> wrote:
> 
> > Yes, can you build setup from the -src tarball,
> > and run it under gdb? If it crashes then, you can type\
> > 
> > 'bt full'
> > and send me or the list the output.
> 
> I haven't tried compiling the source yet, but using the binary 
> you provided, I get hundreds of the following errors in gdb:
> 
> warning: LOG: 1 Found ini file - 
> file://P:\Software\Windows\Cygwin/setup.ini
> 
> Alan
> 

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

RE: New version of setup - prerelease available

[Robert Collins]

Sounds like there is a memory leak or somesuch. With the MD5 sums in
ini's I'll be able to do some proper testing myself now.

How many packages where you installing?
Which ones?

Rob

> -----Original Message-----
> From: Mark Himsley [mailto:mark@mdsh.com] 
> Sent: Friday, May 03, 2002 9:17 PM
> To: Cygwin
> Subject: Re: New version of setup - prerelease available
> 
> 
> On Wed, 1 May 2002 21:33:22 +1000 you wrote:
> 
> >I've uploaded a new version of setup.exe, and source, to
> >http://www.cygwin.com/setup-snapshots/setup-md5-20020501.exe
> 
> I've just tried to use this...
> 
> As usual, I did a 'Download from Internet' followed by an 
> 'Install from Local Drive'.
> 
> The download worked like a dream.
> The install didn't.
> 
> For the install it got as far as the page which says:
> -----------------------------------------------------------------
> Process
> This page displays the progress of the download or installation.
> 
> Installing...
> (PKG)
> (FILE)
> Package [ bar graph... ]
> -----------------------------------------------------------------
> 
> The package chooser window is not opened. Nothing is 
> displayed after the
> (PKG) or (FILE) and the bar graph does not move. The process 
> eats memory until it gets up to ~168MB and then ends.  
> Nothing is installed. setup.log and setup.log.full are not 
> modified (the last things logged were the downloads of the 
> files from the previous run).
> 
> Version 2.194.2.25 happily installed the packages which your 
> beta had downloaded.
> 
> -- 
> Mark Himsley
> In Acton
> 
> --
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> Bug reporting:         http://cygwin.com/bugs.html
> Documentation:         http://cygwin.com/docs.html
> FAQ:                   http://cygwin.com/faq/
> 
> 

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: New version of setup - prerelease available

[Mark Himsley]

On Fri, 3 May 2002 21:18:58 +1000 you wrote:

>Sounds like there is a memory leak or somesuch. With the MD5 sums in
>ini's I'll be able to do some proper testing myself now.
>
>How many packages where you installing?
>Which ones?

This is the section from setup.log from the successful install for version
2.194.2.25, the beta version would have been trying to install the same
files.

--------------------------------------------------------------------
2002/05/03 12:12:41 Starting cygwin install, version 2.194.2.25
2002/05/03 12:12:41 Current Directory:
Y:\software\i386\windows\Cygwin.com\Cygwin-download
2002/05/03 12:12:41 Command line parameters
2002/05/03 12:12:41 0 -
'Y:\software\i386\windows\Cygwin.com\Cygwin-download\setup.exe'
2002/05/03 12:12:41 1 parameters passed
2002/05/03 12:13:05 source: from cwd
2002/05/03 12:13:06 root: C:/cygwin binary system
2002/05/03 12:13:06 Selected local directory:
Y:\software\i386\windows\Cygwin.com\Cygwin-download
2002/05/03 12:14:17 Uninstalling bzip2
2002/05/03 12:14:17 Uninstalling clear
2002/05/03 12:14:17 Uninstalling curl
2002/05/03 12:14:17 Uninstalling grep
2002/05/03 12:14:18 Uninstalling less
2002/05/03 12:14:18 Uninstalling mingw-runtime
2002/05/03 12:14:18 Uninstalling ncftp
2002/05/03 12:14:18 Uninstalling rcs
2002/05/03 12:14:18 Uninstalling rsync
2002/05/03 12:14:18 Uninstalling termcap
2002/05/03 12:14:18 Uninstalling tetex-beta
2002/05/03 12:14:20 Uninstalling texinfo
2002/05/03 12:14:20 Uninstalling vim
2002/05/03 12:14:24 Uninstalling w32api
2002/05/03 12:14:24 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/bzip2/bzip2-1.0.2-1.tar.bz2
2002/05/03 12:14:24 compress_bz::error called
2002/05/03 12:14:25 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/clear/clear-1.0-1.tar.bz2
2002/05/03 12:14:25 compress_bz::error called
2002/05/03 12:14:25 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/curl/curl-7.9.6-1.tar.bz2
2002/05/03 12:14:25 compress_bz::error called
2002/05/03 12:14:28 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/grep/grep-2.5-1.tar.bz2
2002/05/03 12:14:28 compress_bz::error called
2002/05/03 12:14:29 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/less/less-374-1.tar.bz2
2002/05/03 12:14:29 compress_bz::error called
2002/05/03 12:14:29 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/bzip2/libbz2_0/libbz2_0-1.0.2-1.tar.bz2
2002/05/03 12:14:29 compress_bz::error called
2002/05/03 12:14:29 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/mingw-runtime/mingw-runtime-1.3-2.tar.bz2
2002/05/03 12:14:29 compress_bz::error called
2002/05/03 12:14:31 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/ncftp/ncftp-3.1.3-1.tar.bz2
2002/05/03 12:14:31 compress_bz::error called
2002/05/03 12:14:33 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/rcs/rcs-5.7-3.tar.bz2
2002/05/03 12:14:33 compress_bz::error called
2002/05/03 12:14:34 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/rsync/rsync-2.5.5-1.tar.bz2
2002/05/03 12:14:34 compress_bz::error called
2002/05/03 12:14:34 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/termcap/termcap-20020403-1.tar.bz2
2002/05/03 12:14:34 compress_bz::error called
2002/05/03 12:14:34 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/tetex/tetex-beta-20001218-4.tar.bz2
2002/05/03 12:14:34 compress_bz::error called
2002/05/03 12:14:47 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/texinfo/texinfo-4.1-1.tar.bz2
2002/05/03 12:14:47 compress_bz::error called
2002/05/03 12:14:50 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/vim/vim-6.1-2.tar.bz2
2002/05/03 12:14:50 compress_bz::error called
2002/05/03 12:15:07 Installing
file://http%3a%2f%2fmirrors.rcn.net%2fpub%2fsourceware%2fcygwin/release/w32api/w32api-1.3-2.tar.bz2
2002/05/03 12:15:07 compress_bz::error called
2002/05/03 12:15:47 running: C:\cygwin\bin\sh.exe -c
/etc/postinstall/bzip2.sh
2002/05/03 12:15:48 running: C:\cygwin\bin\sh.exe -c
/etc/postinstall/ncftp.sh
2002/05/03 12:15:48 running: C:\cygwin\bin\sh.exe -c
/etc/postinstall/post-tetex.sh
2002/05/03 12:15:48 mbox note: Installation Complete
2002/05/03 12:15:50 Ending cygwin install
--------------------------------------------------------------------



>Rob
>
>> -----Original Message-----
>> From: Mark Himsley [mailto:mark@mdsh.com] 
>> Sent: Friday, May 03, 2002 9:17 PM
>> To: Cygwin
>> Subject: Re: New version of setup - prerelease available
>> 
>> 
>> On Wed, 1 May 2002 21:33:22 +1000 you wrote:
>> 
>> >I've uploaded a new version of setup.exe, and source, to
>> >http://www.cygwin.com/setup-snapshots/setup-md5-20020501.exe
>> 
>> I've just tried to use this...
>> 
>> As usual, I did a 'Download from Internet' followed by an 
>> 'Install from Local Drive'.
>> 
>> The download worked like a dream.
>> The install didn't.
>> 
>> For the install it got as far as the page which says:
>> -----------------------------------------------------------------
>> Process
>> This page displays the progress of the download or installation.
>> 
>> Installing...
>> (PKG)
>> (FILE)
>> Package [ bar graph... ]
>> -----------------------------------------------------------------
>> 
>> The package chooser window is not opened. Nothing is 
>> displayed after the
>> (PKG) or (FILE) and the bar graph does not move. The process 
>> eats memory until it gets up to ~168MB and then ends.  
>> Nothing is installed. setup.log and setup.log.full are not 
>> modified (the last things logged were the downloads of the 
>> files from the previous run).
>> 
>> Version 2.194.2.25 happily installed the packages which your 
>> beta had downloaded.
>> 
>> -- 
>> Mark Himsley
>> In Acton
>> 
>> --
>> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>> Bug reporting:         http://cygwin.com/bugs.html
>> Documentation:         http://cygwin.com/docs.html
>> FAQ:                   http://cygwin.com/faq/
>> 
>> 

-- 
Mark Himsley
In Acton

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

RE: New version of setup - prerelease available

[Robert Collins]

> -----Original Message-----
> From: Alan Dobkin [mailto:Alan@ADobkin.Net] 
> Sent: Thursday, May 02, 2002 3:54 AM

> When I run this new version (2.216) and select "Install from 
> Local Directory", as soon as setup gets to the "Progress" 
> window (before 
> listing any available packages), the CPU jumps up over 50% while 
> the memory for that process grows to about 150 MB.  Eventually, 
> after about a minute or so, the setup window/process disappears.

Hmm, sounds suspect.
 
> I haven't had any problems with the current release or previous 
> releases of setup.exe, and this new version seems to work when I 
> select "Install from Internet".  My local directory is a mirror 
> of mirrors.rcn.net/pub/sourceware/cygwin, which I have been using 

Ah. It's strange that the usage is jumping, as the MD5 sums are only
calculated for files that have an MD5 sum in setup.ini/

> for several months and is updated every night.  I am running W2K, 
> and I have confirmed this behavior on two systems so far, one is 
> W2K Professional (workstation) and one is W2K Server.
> 
> Let me know if you need me to provide any more information....

Yes, can you build setup from the -src tarball, and run it under gdb? If
it crashes then, you can type\

'bt full'
and send me or the list the output.

Cheers,
Rob

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

RE: New version of setup - prerelease available

[Alan Dobkin]

--On Thursday, May 02, 2002 9:41 PM +1000 Robert Collins
<robert.collins@itdomain.com.au> wrote:

> Yes, can you build setup from the -src tarball, 
> and run it under gdb? If it crashes then, you can type\
> 
> 'bt full'
> and send me or the list the output.

I haven't tried compiling the source yet, but using the binary 
you provided, I get hundreds of the following errors in gdb:

warning: LOG: 1 Found ini file - file://P:\Software\Windows\Cygwin/setup.ini

Alan

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

RE: New version of setup - prerelease available

[Robert Collins]

> -----Original Message-----
> From: Cliff Hones [mailto:cliff@aonix.co.uk] 
> Sent: Wednesday, May 01, 2002 10:56 PM

> Yes - it did, and the install worked fine.  After this my 
> /etc/setup/timestamp now contains 1016041807, and setup no 
> longer shows the warning re out-of-date setup.ini.  But where 
> is it getting this old stamp from?

Are you 100% positive you have no other setup.ini's? Perhaps an old one
in the local dir root? 

Rob

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: New version of setup - prerelease available

[Cliff Hones]

From: "Robert Collins" <robert.collins@itdomain.com.au>
> 
> Are you 100% positive you have no other setup.ini's? Perhaps an old one
> in the local dir root? 

Yes - using Find (the Windows version) on all my hard disks found
quite a few setup.ini's of course, but only one was a Cygwin one,
and this is the right one, in the right place, with the right
timestamp.  Curious.

-- Cliff
 


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: New version of setup - prerelease available

[Cliff Hones]

> Are you 100% positive you have no other setup.ini's? Perhaps an old one
> in the local dir root? 

Aha!  Found it - I had renamed an old setup.ini with this timestamp
to setup.ini.sav (in the local directory).  I don't think setup.exe
should be taking any notice of a file with this name though!

-- Cliff



--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: New version of setup - prerelease available

[Cliff Hones]

After a little experimentation, it appears that it doesn't
matter what the file is called - if there's any file in the top
level of the local directory with the format of a setup.ini
file, it gets used for determining the timestamp to put
in /etc/setup/timestamp.  But its contents thankfully don't
take precedence over the real setup.ini in the http%%... subdir.

I know we're supposed to view the local dir as a black box,
and not go mucking with it, so maybe this isn't strictly a
bug - but it's rather surprising behaviour all the same.

-- Cliff



--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

RE: New version of setup - prerelease available

[Robert Collins]

> -----Original Message-----
> From: Cliff Hones [mailto:cliff@aonix.co.uk] 
> Sent: Wednesday, May 01, 2002 10:12 PM


> When I try "install from local directory" and select the 
> defaults (ie install everything which has been updated) setup 
> gets as far as showing the install progress box, then throws 
> up a box informing me that setup.ini is older than the one I 
> used last time I installed Cygwin.  I can only find one 
> Cygwin setup.ini file on my system, and it's the one setup 
> had just downloaded (from programming.ccp14.ac.uk) with 
> identification:
>    setup-timestamp: 1020183008
>    setup-version: 2.194.2.24
> My cygwin\etc\setup\timestamp contains 1020183008, which 
> looks ok to me.

Hmm, strange. Anyway, clicking on the OK button there should get setup
to continue.

Rob

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: New version of setup - prerelease available

[Cliff Hones]

Robert Collins <robert.collins@itdomain.com.au> wrote:

> > From: Cliff Hones [mailto:cliff@aonix.co.uk] 
> > Sent: Wednesday, May 01, 2002 10:12 PM
>  
> > When I try "install from local directory" and select the 
> > defaults (ie install everything which has been updated) setup 
> > gets as far as showing the install progress box, then throws 
> > up a box informing me that setup.ini is older than the one I 
> > used last time I installed Cygwin.  I can only find one 
> > Cygwin setup.ini file on my system, and it's the one setup 
> > had just downloaded (from programming.ccp14.ac.uk) with 
> > identification:
> >    setup-timestamp: 1020183008
> >    setup-version: 2.194.2.24
> > My cygwin\etc\setup\timestamp contains 1020183008, which 
> > looks ok to me.
> 
> Hmm, strange. Anyway, clicking on the OK button there should get setup
> to continue.

Yes - it did, and the install worked fine.  After this my
/etc/setup/timestamp now contains 1016041807, and setup no longer
shows the warning re out-of-date setup.ini.  But where is it getting
this old stamp from?

-- Cliff



--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

New version of setup - prerelease available

[Robert Collins]

I've uploaded a new version of setup.exe, and source, to 
http://www.cygwin.com/setup-snapshots/setup-md5-20020501.exe and
http://www.cygwin.com/setup-snapshots/setup-md5-20020501-src.tar.bz2.

New features:
* Allows source only packages.
* Checks md5 sums if present in setup.ini
* NEVER redownloads a file. - 'Redownload' has been removed. (3 users
out of several thousand is simply not enough cause to keep a kludge).
* Some bugfixes, including a nasty one which may have caused some
locally downloaded files to *never* be installable.
* The source will build when targeted against cygwin or mingw, and
without all the cygwin sources.
* new command line option -n/--no-shortcuts disables the default
shortcut creation.

This snapshot was made immediately prior to the CVS being branched (The
tag is setup-200205). As such it has the 'White box', but that will be
removed prior to release.

Barring any bug reports in the next day, this will be released.

***** IMPORTANT *****

Enabling the MD5 support on sourceware *will* cause prior versions of
setup to start complaining, although they *should* still work. As such,
you will not be able to downgrade if you don't like the version. Please
help us make it the best ever via your feedback on this pre-release!

********************

Cheers,
Rob

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: New version of setup - prerelease available

[Cliff Hones]

Robert Collins <robert.collins@itdomain.com.au> wrote:
> I've uploaded a new version of setup.exe, and source, to 
> http://www.cygwin.com/setup-snapshots/setup-md5-20020501.exe and
> http://www.cygwin.com/setup-snapshots/setup-md5-20020501-src.tar.bz2.
> 
> New features:
> * Allows source only packages.
> * Checks md5 sums if present in setup.ini
> * NEVER redownloads a file. - 'Redownload' has been removed. (3 users
> out of several thousand is simply not enough cause to keep a kludge).
> * Some bugfixes, including a nasty one which may have caused some
> locally downloaded files to *never* be installable.
> * The source will build when targeted against cygwin or mingw, and
> without all the cygwin sources.
> * new command line option -n/--no-shortcuts disables the default
> shortcut creation.
> 
> This snapshot was made immediately prior to the CVS being branched (The
> tag is setup-200205). As such it has the 'White box', but that will be
> removed prior to release.
> 
> Barring any bug reports in the next day, this will be released.
> 
> ***** IMPORTANT *****
> 
> Enabling the MD5 support on sourceware *will* cause prior versions of
> setup to start complaining, although they *should* still work. As such,
> you will not be able to downgrade if you don't like the version. Please
> help us make it the best ever via your feedback on this pre-release!
> 
> ********************

The removal of redownload is exactly what I hoped.  Running in download
mode twice in succession with the same (default) selections caused no
packages to download the second time.

When I try "install from local directory" and select the defaults
(ie install everything which has been updated) setup gets as far as
showing the install progress box, then throws up a box informing me
that setup.ini is older than the one I used last time I installed
Cygwin.  I can only find one Cygwin setup.ini file on my system,
and it's the one setup had just downloaded (from programming.ccp14.ac.uk)
with identification:
   setup-timestamp: 1020183008
   setup-version: 2.194.2.24
My cygwin\etc\setup\timestamp contains 1020183008, which looks ok to me.

-- Cliff.



--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: New version of setup - prerelease available

[Alan Dobkin]

--On Wednesday, May 01, 2002 9:33 PM +1000 Robert Collins
<robert.collins@itdomain.com.au> wrote:

> I've uploaded a new version of setup.exe, and source, to 
> http://www.cygwin.com/setup-snapshots/setup-md5-20020501.exe and
> http://www.cygwin.com/setup-snapshots/setup-md5-20020501-src.tar.bz2.

When I run this new version (2.216) and select "Install from Local
Directory", as soon as setup gets to the "Progress" window (before 
listing any available packages), the CPU jumps up over 50% while 
the memory for that process grows to about 150 MB.  Eventually, 
after about a minute or so, the setup window/process disappears.

I haven't had any problems with the current release or previous 
releases of setup.exe, and this new version seems to work when I 
select "Install from Internet".  My local directory is a mirror 
of mirrors.rcn.net/pub/sourceware/cygwin, which I have been using 
for several months and is updated every night.  I am running W2K, 
and I have confirmed this behavior on two systems so far, one is 
W2K Professional (workstation) and one is W2K Server.

Let me know if you need me to provide any more information....

Alan

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/

Re: New version of setup - prerelease available

[Mark Himsley]

On Wed, 1 May 2002 21:33:22 +1000 you wrote:

>I've uploaded a new version of setup.exe, and source, to 
>http://www.cygwin.com/setup-snapshots/setup-md5-20020501.exe

I've just tried to use this...

As usual, I did a 'Download from Internet' followed by an 'Install from
Local Drive'.

The download worked like a dream.
The install didn't.

For the install it got as far as the page which says:
-----------------------------------------------------------------
Process
This page displays the progress of the download or installation.

Installing...
(PKG)
(FILE)
Package [ bar graph... ]
-----------------------------------------------------------------

The package chooser window is not opened. Nothing is displayed after the
(PKG) or (FILE) and the bar graph does not move. The process eats memory
until it gets up to ~168MB and then ends.  Nothing is installed. setup.log
and setup.log.full are not modified (the last things logged were the
downloads of the files from the previous run).

Version 2.194.2.25 happily installed the packages which your beta had
downloaded.

-- 
Mark Himsley
In Acton

--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Bug reporting:         http://cygwin.com/bugs.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/