From 2eecc4ef19e0a31c56fc9912d8e7a9cb325db33b Mon Sep 17 00:00:00 2001 From: Denys Vlasenko Date: Thu, 22 Jun 2023 15:31:03 +0200 Subject: [PATCH] find-debuginfo: Add -v,--verbose for per file messages Only print messages what big steps we are at without --verbose. For a reader of rpmbuild's log, it's rather unclear what find-debuginfo is doing. It used to be too verbose, "extracting debug info from FILE" for every file, and while this can be suppressed now, we still end up with something semi-mysterious like this: ... extracting debug info from /builddir/build/BUILDROOT/xyz gdb-add-index: No index was created for /builddir/build/BUILDROOT/xyz gdb-add-index: [Was there no debuginfo? Was there already an index?] symlinked /usr/lib/debug/usr/lib64/libcpupower.so.0.0.1.debug to /usr/lib/debug/usr/lib64/libcpupower.so.debug symlinked /usr/lib/debug/usr/lib64/libcpupower.so.0.0.1.debug to /usr/lib/debug/usr/lib64/libcpupower.so.0.debug cpio: binutils-2.30/bfd: Cannot stat: No such file or directory cpio: binutils-2.30/bfd/aout-target.h: Cannot stat: No such file or directory cpio: binutils-2.30/bfd/aoutx.h: Cannot stat: No such file or directory cpio: binutils-2.30/bfd/archive.c: Cannot stat: No such file or directory cpio: binutils-2.30/bfd/archive64.c: Cannot stat: No such file or directory ... 775655 blocks + /usr/lib/rpm/check-buildroot + /usr/lib/rpm/redhat/brp-ldconfig ... The reader is left confused. "What these cpio errors are about? Why those sources are not found?" (Well, because not every source name extracted by 'debugedit -l' has to exist, but this requires considerable digging aroung to understand). We can give a few messages explaining what general steps we go through: Extracting debug info from N files DWARF-compressing N files Creating .debug symlinks for symlinks to ELF files Copying sources found by 'debugedit -l' This is also useful to get a feeling which steps are time consuming. Kernel builds often need to investigate this aspect. To help a bit more, add "find-debuginfo: starting" and "find-debuginfo: done" messages too. This patch adds these messages. The -q options suppress these messages too. It also adds a --verbose flag to print per file messages. Those per file messages are now suppressed by default and only the general step messages are show. Unless -q is given, which suppresses all non-error output. Signed-off-by: Denys Vlasenko Signed-off-by: Mark Wielaard --- scripts/find-debuginfo.in | 36 +++++++++++++++++++++++++++--------- 1 file changed, 27 insertions(+), 9 deletions(-) diff --git a/scripts/find-debuginfo.in b/scripts/find-debuginfo.in index e7ac095..9cfb701 100755 --- a/scripts/find-debuginfo.in +++ b/scripts/find-debuginfo.in @@ -26,7 +26,7 @@ Usage: find-debuginfo [OPTION]... [builddir] automagically generates debug info and file lists Options: -[--strict-build-id] [-g] [-r] [-m] [-i] [-n] [-q] +[--strict-build-id] [-g] [-r] [-m] [-i] [-n] [-q] [-v] [--keep-section SECTION] [--remove-section SECTION] [--g-libs] [-j N] [--jobs N] @@ -94,7 +94,9 @@ will be called /usr/debug/src/. This makes sure the debug source dirs are unique between package version, release and achitecture (Use --unique-debug-src-base "%{name}-%{VERSION}-%{RELEASE}.%{_arch}") -The -q or --quiet flag silences non-error output from the script. +The -q or --quiet flag silences all non-error output from the script. +The -v or --verbose flag add more output for all files processed. +When neither -q or -v is given then only output for each pass is given. All file names in switches are relative to builddir ('.' if not given). EOF @@ -148,9 +150,12 @@ n_jobs=1 # exit early on --version or --help done=false -# silence non-error output +# silence all output quiet=false +# add more non-error output +verbose=false + BUILDDIR=. out=debugfiles.list srcout= @@ -246,6 +251,11 @@ while [ $# -gt 0 ]; do ;; -q|--quiet) quiet=true + verbose=false + ;; + -v|--verbose) + quiet=false + verbose=true ;; --version) echo "find-debuginfo @VERSION@" @@ -289,6 +299,8 @@ if [ "$strip_g" = "true" ] && [ "$strip_glibs" = "true" ]; then exit 2 fi +$quiet || echo "find-debuginfo: starting" 2>&1 + i=0 while ((i < nout)); do outs[$i]="$BUILDDIR/${outs[$i]}" @@ -445,7 +457,7 @@ do_file() get_debugfn "$f" [ -f "${debugfn}" ] && return - $quiet || echo "extracting debug info from $f" + $verbose && echo "extracting debug info from $f" # See also cpio SOURCEFILE copy. Directories must match up. debug_base_name="$RPM_BUILD_DIR" debug_dest_name="/usr/src/debug" @@ -521,7 +533,7 @@ do_file() grep "^$inum " "$temp/linked" | while read inum linked; do link=$debugfn get_debugfn "$linked" - $quiet || echo "hard linked $link to $debugfn" + $verbose && echo "hard linked $link to $debugfn" mkdir -p "$(dirname "$debugfn")" && ln -nf "$link" "$debugfn" done fi @@ -549,6 +561,7 @@ run_job() } n_files=$(wc -l <"$temp/primary") +$quiet || echo "Extracting debug info from $n_files files" 2>&1 if [ $n_jobs -gt $n_files ]; then n_jobs=$n_files fi @@ -587,7 +600,8 @@ if $run_dwz \ && [ -d "${RPM_BUILD_ROOT}/usr/lib/debug" ]; then readarray dwz_files < <(cd "${RPM_BUILD_ROOT}/usr/lib/debug"; find -type f -name \*.debug | LC_ALL=C sort) if [ ${#dwz_files[@]} -gt 0 ]; then - $quiet || size_before=$(du -sk ${RPM_BUILD_ROOT}/usr/lib/debug | cut -f1) + $quiet || echo "DWARF-compressing ${#dwz_files[@]} files" 2>&1 + $verbose && size_before=$(du -sk ${RPM_BUILD_ROOT}/usr/lib/debug | cut -f1) dwz_multifile_name="${RPM_PACKAGE_NAME}-${RPM_PACKAGE_VERSION}-${RPM_PACKAGE_RELEASE}.${RPM_ARCH}" dwz_multifile_suffix= dwz_multifile_idx=0 @@ -611,8 +625,8 @@ if $run_dwz \ echo >&2 "*** ERROR: DWARF compression requested, but no dwz installed" exit 2 fi - $quiet || size_after=$(du -sk ${RPM_BUILD_ROOT}/usr/lib/debug | cut -f1) - $quiet || echo "original debug info size: ${size_before}kB, size after compression: ${size_after}kB" + $verbose && size_after=$(du -sk ${RPM_BUILD_ROOT}/usr/lib/debug | cut -f1) + $verbose && echo "original debug info size: ${size_before}kB, size after compression: ${size_after}kB" # Remove .dwz directory if empty rmdir "${RPM_BUILD_ROOT}/usr/lib/debug/.dwz" 2>/dev/null @@ -625,6 +639,7 @@ fi # For each symlink whose target has a .debug file, # make a .debug symlink to that file. +$quiet || echo "Creating .debug symlinks for symlinks to ELF files" 2>&1 find "$RPM_BUILD_ROOT" ! -path "${debugdir}/*" -type l -print | while read f do @@ -632,7 +647,7 @@ do f=${f#$RPM_BUILD_ROOT} t=${t#$RPM_BUILD_ROOT} if [ -f "$debugdir$t" ]; then - $quiet || echo "symlinked /usr/lib/debug$t to /usr/lib/debug${f}.debug" + $verbose && echo "symlinked /usr/lib/debug$t to /usr/lib/debug${f}.debug" debug_link "/usr/lib/debug$t" "${f}.debug" fi done @@ -646,6 +661,7 @@ if [ -s "$SOURCEFILE" ]; then debug_dest_name="/usr/src/debug/${unique_debug_src_base}" fi + $quiet || echo "Copying sources found by 'debugedit -l' to ${debug_dest_name}" 2>&1 mkdir -p "${RPM_BUILD_ROOT}${debug_dest_name}" # Filter out anything compiler generated which isn't a source file. # e.g. , , <__thread_local_inner macros>. @@ -761,3 +777,5 @@ if ((nout > 0)); then cat "$LISTFILE" >> "${LISTFILE}.new" mv "${LISTFILE}.new" "$LISTFILE" fi + +$quiet || echo "find-debuginfo: done" 2>&1 -- 2.40.1