* Help! I need JEENI configuration Software for a M$-PC... jserial.exe and jconfig.exe
@ 2006-04-10 19:13 oliver munz @ s p e a g
2006-04-10 19:54 ` [ECOS] " Greg Holdren
0 siblings, 1 reply; 2+ messages in thread
From: oliver munz @ s p e a g @ 2006-04-10 19:13 UTC (permalink / raw)
To: ecos-devel, ecos-discuss
I buyed a EPI JEENI ARM7 JTAG emulator on eBay. Unfortunatly,
Mentor-Graphics, buyed EPI and don't support the JEENI. So i can trow
the JEENI away - if not somebody can help me
If You have a the JEENI-software-CD, let me know...
Thanks
Oliver Munz
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [ECOS] Help! I need JEENI configuration Software for a M$-PC... jserial.exe and jconfig.exe
2006-04-10 19:13 Help! I need JEENI configuration Software for a M$-PC... jserial.exe and jconfig.exe oliver munz @ s p e a g
@ 2006-04-10 19:54 ` Greg Holdren
0 siblings, 0 replies; 2+ messages in thread
From: Greg Holdren @ 2006-04-10 19:54 UTC (permalink / raw)
To: munz, ecos-devel
Do you need the setup untility? This will set the IP address or load new
firmware image to the JTAG box if you need to. If you talking about debug
software then there isnt any. It talks RDI so it will work with the ARM
SDT/ADS debugger, GNU GDB/Insight etc over the LAN port.
Greg
----- Original Message -----
From: "oliver munz @ s p e a g" <munz@speag.ch>
To: <ecos-devel@sourceware.org>; <ecos-discuss@sourceware.org>
Sent: Monday, April 10, 2006 12:13 PM
Subject: [ECOS] Help! I need JEENI configuration Software for a M$-PC...
jserial.exe and jconfig.exe
> I buyed a EPI JEENI ARM7 JTAG emulator on eBay. Unfortunatly,
> Mentor-Graphics, buyed EPI and don't support the JEENI. So i can trow
> the JEENI away - if not somebody can help me
>
> If You have a the JEENI-software-CD, let me know...
>
> Thanks
> Oliver Munz
>
> --
> Before posting, please read the FAQ: http://ecos.sourceware.org/fom/ecos
> and search the list archive: http://ecos.sourceware.org/ml/ecos-discuss
>
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2006-04-10 19:54 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-04-10 19:13 Help! I need JEENI configuration Software for a M$-PC... jserial.exe and jconfig.exe oliver munz @ s p e a g
2006-04-10 19:54 ` [ECOS] " Greg Holdren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).