* Porting eCos to Logic PD Zoom Starter Development Kit (Sharp LH-75401)
@ 2004-03-08 10:34 Oscar Broekema
0 siblings, 0 replies; 2+ messages in thread
From: Oscar Broekema @ 2004-03-08 10:34 UTC (permalink / raw)
To: ecos-devel
Hello,
I'm also starting a porting effort to get eCos running on
http://www.logicpd.com/eps/sharp/devkits/sdk/default.php
using a Sharp LH-75401 core:
http://www.sharpsma.com/sma/products/mcu_soc/LH75401_splash.htm
Who is porting eCos too on Logic PD Zoom Starter Development Kit (SDK)? Any
progress on porting?
--Oscar Broekema
This message was checked by MailScan for WorkgroupMail.
www.workgroupmail.com
^ permalink raw reply [flat|nested] 2+ messages in thread
* RE: Porting eCos to Logic PD Zoom Starter Development Kit (Sharp LH-75401)
@ 2004-03-08 14:59 Gary Parnes
0 siblings, 0 replies; 2+ messages in thread
From: Gary Parnes @ 2004-03-08 14:59 UTC (permalink / raw)
To: 'Oscar Broekema', ecos-devel
In response to a client's request, I had started work on porting eCos to the
LH-75401 devkit. Unfortunately, the client withdrew their support at a very
early stage of development. Before I had to set things aside, I did manage
to get to the point where I could use LoLo to load and execute a ROMRAM
version of RedBoot (with support for the 91C111 Ethernet controller and the
82510 serial port), which is half the battle, I guess.
The next step would have been to come up with a ROM version that I could
burn onto the board. After that, I probably would worked on getting the
FLASH part recognized.
I have the code, and a tentative stab at package configuration files. I
never checked it in, because I felt it was still a bit "raw". However, if
you'd like to pick up where I left off, I'd be more than happy to hand over
what I have.
--Gary Parnes
SENIOR SOFTWARE ENGINEER
Logic Product Development
411 Washington Ave. North, Suite 101
Minneapolis, MN 55401
Main: (612) 672-9495
Direct: (612) 436-5165
> -----Original Message-----
> From: Oscar Broekema [mailto:oscar@oacreations.demon.nl]
> Sent: Monday, March 08, 2004 4:33 AM
> To: ecos-devel@sources.redhat.com
> Subject: Porting eCos to Logic PD Zoom Starter Development Kit (Sharp
> LH-75401)
>
>
> Hello,
>
> I'm also starting a porting effort to get eCos running on
> http://www.logicpd.com/eps/sharp/devkits/sdk/default.php
>
> using a Sharp LH-75401 core:
> http://www.sharpsma.com/sma/products/mcu_soc/LH75401_splash.htm
>
> Who is porting eCos too on Logic PD Zoom Starter Development
> Kit (SDK)? Any
> progress on porting?
>
>
> --Oscar Broekema
>
> This message was checked by MailScan for WorkgroupMail.
> www.workgroupmail.com
>
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2004-03-08 14:59 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-03-08 10:34 Porting eCos to Logic PD Zoom Starter Development Kit (Sharp LH-75401) Oscar Broekema
2004-03-08 14:59 Gary Parnes
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).